blob: b456b4471f3559238137155c41afe7a36fab136f [file] [log] [blame]
Tony Lindgrenb63128e2009-12-11 16:16:32 -08001/*
2 * Helper module for board specific I2C bus registration
3 *
4 * Copyright (C) 2009 Nokia Corporation.
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * version 2 as published by the Free Software Foundation.
9 *
10 * This program is distributed in the hope that it will be useful, but
11 * WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13 * General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
18 * 02110-1301 USA
19 *
20 */
21
Tony Lindgrene4c060d2012-10-05 13:25:59 -070022#include "soc.h"
Tony Lindgren2a296c82012-10-02 17:41:35 -070023#include "omap_hwmod.h"
Tony Lindgren25c7d492012-10-02 17:25:48 -070024#include "omap_device.h"
Vaibhav Bedia18000982012-12-19 06:53:10 +000025#include "omap-pm.h"
Tony Lindgrenb63128e2009-12-11 16:16:32 -080026
Paul Walmsleyb13159a2012-10-29 20:57:44 -060027#include "prm.h"
28#include "common.h"
Tony Lindgrenb63128e2009-12-11 16:16:32 -080029#include "mux.h"
Tony Lindgren3a8761c2012-10-08 09:11:22 -070030#include "i2c.h"
Tony Lindgrenb63128e2009-12-11 16:16:32 -080031
Avinash.H.M6d3c55f2011-07-10 05:27:16 -060032/* In register I2C_CON, Bit 15 is the I2C enable bit */
33#define I2C_EN BIT(15)
34#define OMAP2_I2C_CON_OFFSET 0x24
35#define OMAP4_I2C_CON_OFFSET 0xA4
36
Tony Lindgren3a8761c2012-10-08 09:11:22 -070037#define MAX_OMAP_I2C_HWMOD_NAME_LEN 16
38
39static void __init omap2_i2c_mux_pins(int bus_id)
Tony Lindgrenb63128e2009-12-11 16:16:32 -080040{
Tony Lindgrenf99bf162010-07-05 16:31:40 +030041 char mux_name[sizeof("i2c2_scl.i2c2_scl")];
Tony Lindgrenb63128e2009-12-11 16:16:32 -080042
43 /* First I2C bus is not muxable */
Tony Lindgrenf99bf162010-07-05 16:31:40 +030044 if (bus_id == 1)
45 return;
Tony Lindgrenb63128e2009-12-11 16:16:32 -080046
Tony Lindgrenf99bf162010-07-05 16:31:40 +030047 sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id);
48 omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
49 sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
50 omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
Tony Lindgrenb63128e2009-12-11 16:16:32 -080051}
Avinash.H.M6d3c55f2011-07-10 05:27:16 -060052
53/**
54 * omap_i2c_reset - reset the omap i2c module.
55 * @oh: struct omap_hwmod *
56 *
57 * The i2c moudle in omap2, omap3 had a special sequence to reset. The
58 * sequence is:
59 * - Disable the I2C.
60 * - Write to SOFTRESET bit.
61 * - Enable the I2C.
62 * - Poll on the RESETDONE bit.
63 * The sequence is implemented in below function. This is called for 2420,
64 * 2430 and omap3.
65 */
66int omap_i2c_reset(struct omap_hwmod *oh)
67{
68 u32 v;
69 u16 i2c_con;
70 int c = 0;
71
72 if (oh->class->rev == OMAP_I2C_IP_VERSION_2) {
73 i2c_con = OMAP4_I2C_CON_OFFSET;
74 } else if (oh->class->rev == OMAP_I2C_IP_VERSION_1) {
75 i2c_con = OMAP2_I2C_CON_OFFSET;
76 } else {
77 WARN(1, "Cannot reset I2C block %s: unsupported revision\n",
78 oh->name);
79 return -EINVAL;
80 }
81
82 /* Disable I2C */
83 v = omap_hwmod_read(oh, i2c_con);
84 v &= ~I2C_EN;
85 omap_hwmod_write(v, oh, i2c_con);
86
87 /* Write to the SOFTRESET bit */
88 omap_hwmod_softreset(oh);
89
90 /* Enable I2C */
91 v = omap_hwmod_read(oh, i2c_con);
92 v |= I2C_EN;
93 omap_hwmod_write(v, oh, i2c_con);
94
95 /* Poll on RESETDONE bit */
96 omap_test_timeout((omap_hwmod_read(oh,
97 oh->class->sysc->syss_offs)
98 & SYSS_RESETDONE_MASK),
99 MAX_MODULE_SOFTRESET_WAIT, c);
100
101 if (c == MAX_MODULE_SOFTRESET_WAIT)
102 pr_warning("%s: %s: softreset failed (waited %d usec)\n",
103 __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
104 else
105 pr_debug("%s: %s: softreset in %d usec\n", __func__,
106 oh->name, c);
107
108 return 0;
109}
Tony Lindgren3a8761c2012-10-08 09:11:22 -0700110
Tony Lindgrenc34f7c62012-10-29 16:17:59 -0700111static int __init omap_i2c_nr_ports(void)
112{
113 int ports = 0;
114
115 if (cpu_is_omap24xx())
116 ports = 2;
117 else if (cpu_is_omap34xx())
118 ports = 3;
119 else if (cpu_is_omap44xx())
120 ports = 4;
121 return ports;
122}
123
Linus Torvalds752451f2012-12-18 16:51:10 -0800124/*
125 * XXX This function is a temporary compatibility wrapper - only
126 * needed until the I2C driver can be converted to call
127 * omap_pm_set_max_dev_wakeup_lat() and handle a return code.
128 */
129static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
130{
131 omap_pm_set_max_mpu_wakeup_lat(dev, t);
132}
133
Tony Lindgren3a8761c2012-10-08 09:11:22 -0700134static const char name[] = "omap_i2c";
135
136int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata,
137 int bus_id)
138{
139 int l;
140 struct omap_hwmod *oh;
141 struct platform_device *pdev;
142 char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN];
143 struct omap_i2c_bus_platform_data *pdata;
144 struct omap_i2c_dev_attr *dev_attr;
145
Tony Lindgrenc34f7c62012-10-29 16:17:59 -0700146 if (bus_id > omap_i2c_nr_ports())
147 return -EINVAL;
148
Tony Lindgren3a8761c2012-10-08 09:11:22 -0700149 omap2_i2c_mux_pins(bus_id);
150
151 l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id);
152 WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN,
153 "String buffer overflow in I2C%d device setup\n", bus_id);
154 oh = omap_hwmod_lookup(oh_name);
155 if (!oh) {
156 pr_err("Could not look up %s\n", oh_name);
157 return -EEXIST;
158 }
159
160 pdata = i2c_pdata;
161 /*
162 * pass the hwmod class's CPU-specific knowledge of I2C IP revision in
163 * use, and functionality implementation flags, up to the OMAP I2C
164 * driver via platform data
165 */
166 pdata->rev = oh->class->rev;
167
168 dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
169 pdata->flags = dev_attr->flags;
170
Linus Torvalds752451f2012-12-18 16:51:10 -0800171 /*
172 * When waiting for completion of a i2c transfer, we need to
173 * set a wake up latency constraint for the MPU. This is to
174 * ensure quick enough wakeup from idle, when transfer
175 * completes.
176 * Only omap3 has support for constraints
177 */
178 if (cpu_is_omap34xx())
179 pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
Tony Lindgren3a8761c2012-10-08 09:11:22 -0700180 pdev = omap_device_build(name, bus_id, oh, pdata,
Paul Walmsleyc1d1cd52013-01-26 00:48:53 -0700181 sizeof(struct omap_i2c_bus_platform_data));
Tony Lindgren3a8761c2012-10-08 09:11:22 -0700182 WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
183
Rusty Russell8c6ffba2013-07-15 11:20:32 +0930184 return PTR_ERR_OR_ZERO(pdev);
Tony Lindgren3a8761c2012-10-08 09:11:22 -0700185}
186
Tony Lindgrena6cf9122013-01-11 11:24:19 -0800187static int __init omap_i2c_cmdline(void)
188{
189 return omap_register_i2c_bus_cmdline();
190}
191omap_subsys_initcall(omap_i2c_cmdline);