blob: 8733a2ea04c2b39a02fede69c6e4dbd69035cd3a [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* lanai.c -- Copyright 1999-2003 by Mitchell Blank Jr <mitch@sfgoth.com>
2 *
3 * This program is free software; you can redistribute it and/or
4 * modify it under the terms of the GNU General Public License
5 * as published by the Free Software Foundation; either version
6 * 2 of the License, or (at your option) any later version.
7 *
8 * This driver supports ATM cards based on the Efficient "Lanai"
9 * chipset such as the Speedstream 3010 and the ENI-25p. The
10 * Speedstream 3060 is currently not supported since we don't
11 * have the code to drive the on-board Alcatel DSL chipset (yet).
12 *
13 * Thanks to Efficient for supporting this project with hardware,
14 * documentation, and by answering my questions.
15 *
16 * Things not working yet:
17 *
18 * o We don't support the Speedstream 3060 yet - this card has
19 * an on-board DSL modem chip by Alcatel and the driver will
20 * need some extra code added to handle it
21 *
22 * o Note that due to limitations of the Lanai only one VCC can be
23 * in CBR at once
24 *
25 * o We don't currently parse the EEPROM at all. The code is all
26 * there as per the spec, but it doesn't actually work. I think
27 * there may be some issues with the docs. Anyway, do NOT
28 * enable it yet - bugs in that code may actually damage your
29 * hardware! Because of this you should hardware an ESI before
30 * trying to use this in a LANE or MPOA environment.
31 *
32 * o AAL0 is stubbed in but the actual rx/tx path isn't written yet:
33 * vcc_tx_aal0() needs to send or queue a SKB
34 * vcc_tx_unqueue_aal0() needs to attempt to send queued SKBs
35 * vcc_rx_aal0() needs to handle AAL0 interrupts
36 * This isn't too much work - I just wanted to get other things
37 * done first.
38 *
39 * o lanai_change_qos() isn't written yet
40 *
41 * o There aren't any ioctl's yet -- I'd like to eventually support
Mitchell Blank Jr49693282005-11-29 16:15:59 -080042 * setting loopback and LED modes that way.
Linus Torvalds1da177e2005-04-16 15:20:36 -070043 *
44 * o If the segmentation engine or DMA gets shut down we should restart
45 * card as per section 17.0i. (see lanai_reset)
46 *
47 * o setsockopt(SO_CIRANGE) isn't done (although despite what the
48 * API says it isn't exactly commonly implemented)
49 */
50
51/* Version history:
52 * v.1.00 -- 26-JUL-2003 -- PCI/DMA updates
53 * v.0.02 -- 11-JAN-2000 -- Endian fixes
54 * v.0.01 -- 30-NOV-1999 -- Initial release
55 */
56
57#include <linux/module.h>
58#include <linux/mm.h>
59#include <linux/atmdev.h>
60#include <asm/io.h>
61#include <asm/byteorder.h>
62#include <linux/spinlock.h>
63#include <linux/pci.h>
64#include <linux/dma-mapping.h>
65#include <linux/init.h>
66#include <linux/delay.h>
67#include <linux/interrupt.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070068
69/* -------------------- TUNABLE PARAMATERS: */
70
71/*
72 * Maximum number of VCIs per card. Setting it lower could theoretically
73 * save some memory, but since we allocate our vcc list with get_free_pages,
74 * it's not really likely for most architectures
75 */
76#define NUM_VCI (1024)
77
78/*
79 * Enable extra debugging
80 */
81#define DEBUG
82/*
83 * Debug _all_ register operations with card, except the memory test.
84 * Also disables the timed poll to prevent extra chattiness. This
85 * isn't for normal use
86 */
87#undef DEBUG_RW
88
89/*
90 * The programming guide specifies a full test of the on-board SRAM
91 * at initialization time. Undefine to remove this
92 */
93#define FULL_MEMORY_TEST
94
95/*
96 * This is the number of (4 byte) service entries that we will
97 * try to allocate at startup. Note that we will end up with
98 * one PAGE_SIZE's worth regardless of what this is set to
99 */
100#define SERVICE_ENTRIES (1024)
101/* TODO: make above a module load-time option */
102
103/*
104 * We normally read the onboard EEPROM in order to discover our MAC
105 * address. Undefine to _not_ do this
106 */
107/* #define READ_EEPROM */ /* ***DONT ENABLE YET*** */
108/* TODO: make above a module load-time option (also) */
109
110/*
111 * Depth of TX fifo (in 128 byte units; range 2-31)
112 * Smaller numbers are better for network latency
113 * Larger numbers are better for PCI latency
114 * I'm really sure where the best tradeoff is, but the BSD driver uses
115 * 7 and it seems to work ok.
116 */
117#define TX_FIFO_DEPTH (7)
118/* TODO: make above a module load-time option */
119
120/*
121 * How often (in jiffies) we will try to unstick stuck connections -
122 * shouldn't need to happen much
123 */
124#define LANAI_POLL_PERIOD (10*HZ)
125/* TODO: make above a module load-time option */
126
127/*
128 * When allocating an AAL5 receiving buffer, try to make it at least
129 * large enough to hold this many max_sdu sized PDUs
130 */
131#define AAL5_RX_MULTIPLIER (3)
132/* TODO: make above a module load-time option */
133
134/*
135 * Same for transmitting buffer
136 */
137#define AAL5_TX_MULTIPLIER (3)
138/* TODO: make above a module load-time option */
139
140/*
141 * When allocating an AAL0 transmiting buffer, how many cells should fit.
142 * Remember we'll end up with a PAGE_SIZE of them anyway, so this isn't
143 * really critical
144 */
145#define AAL0_TX_MULTIPLIER (40)
146/* TODO: make above a module load-time option */
147
148/*
149 * How large should we make the AAL0 receiving buffer. Remember that this
150 * is shared between all AAL0 VC's
151 */
152#define AAL0_RX_BUFFER_SIZE (PAGE_SIZE)
153/* TODO: make above a module load-time option */
154
155/*
156 * Should we use Lanai's "powerdown" feature when no vcc's are bound?
157 */
158/* #define USE_POWERDOWN */
159/* TODO: make above a module load-time option (also) */
160
161/* -------------------- DEBUGGING AIDS: */
162
163#define DEV_LABEL "lanai"
164
165#ifdef DEBUG
166
167#define DPRINTK(format, args...) \
168 printk(KERN_DEBUG DEV_LABEL ": " format, ##args)
169#define APRINTK(truth, format, args...) \
170 do { \
171 if (unlikely(!(truth))) \
172 printk(KERN_ERR DEV_LABEL ": " format, ##args); \
173 } while (0)
174
175#else /* !DEBUG */
176
177#define DPRINTK(format, args...)
178#define APRINTK(truth, format, args...)
179
180#endif /* DEBUG */
181
182#ifdef DEBUG_RW
183#define RWDEBUG(format, args...) \
184 printk(KERN_DEBUG DEV_LABEL ": " format, ##args)
185#else /* !DEBUG_RW */
186#define RWDEBUG(format, args...)
187#endif
188
189/* -------------------- DATA DEFINITIONS: */
190
191#define LANAI_MAPPING_SIZE (0x40000)
192#define LANAI_EEPROM_SIZE (128)
193
194typedef int vci_t;
195typedef void __iomem *bus_addr_t;
196
197/* DMA buffer in host memory for TX, RX, or service list. */
198struct lanai_buffer {
199 u32 *start; /* From get_free_pages */
200 u32 *end; /* One past last byte */
201 u32 *ptr; /* Pointer to current host location */
202 dma_addr_t dmaaddr;
203};
204
205struct lanai_vcc_stats {
206 unsigned rx_nomem;
207 union {
208 struct {
209 unsigned rx_badlen;
210 unsigned service_trash;
211 unsigned service_stream;
212 unsigned service_rxcrc;
213 } aal5;
214 struct {
215 } aal0;
216 } x;
217};
218
219struct lanai_dev; /* Forward declaration */
220
221/*
222 * This is the card-specific per-vcc data. Note that unlike some other
223 * drivers there is NOT a 1-to-1 correspondance between these and
224 * atm_vcc's - each one of these represents an actual 2-way vcc, but
225 * an atm_vcc can be 1-way and share with a 1-way vcc in the other
226 * direction. To make it weirder, there can even be 0-way vccs
227 * bound to us, waiting to do a change_qos
228 */
229struct lanai_vcc {
230 bus_addr_t vbase; /* Base of VCC's registers */
231 struct lanai_vcc_stats stats;
232 int nref; /* # of atm_vcc's who reference us */
233 vci_t vci;
234 struct {
235 struct lanai_buffer buf;
236 struct atm_vcc *atmvcc; /* atm_vcc who is receiver */
237 } rx;
238 struct {
239 struct lanai_buffer buf;
240 struct atm_vcc *atmvcc; /* atm_vcc who is transmitter */
241 int endptr; /* last endptr from service entry */
242 struct sk_buff_head backlog;
243 void (*unqueue)(struct lanai_dev *, struct lanai_vcc *, int);
244 } tx;
245};
246
247enum lanai_type {
Jiri Slaby1d0ed382007-06-18 10:58:13 +0200248 lanai2 = PCI_DEVICE_ID_EF_ATM_LANAI2,
249 lanaihb = PCI_DEVICE_ID_EF_ATM_LANAIHB
Linus Torvalds1da177e2005-04-16 15:20:36 -0700250};
251
252struct lanai_dev_stats {
253 unsigned ovfl_trash; /* # of cells dropped - buffer overflow */
254 unsigned vci_trash; /* # of cells dropped - closed vci */
255 unsigned hec_err; /* # of cells dropped - bad HEC */
256 unsigned atm_ovfl; /* # of cells dropped - rx fifo overflow */
257 unsigned pcierr_parity_detect;
258 unsigned pcierr_serr_set;
259 unsigned pcierr_master_abort;
260 unsigned pcierr_m_target_abort;
261 unsigned pcierr_s_target_abort;
262 unsigned pcierr_master_parity;
263 unsigned service_notx;
264 unsigned service_norx;
265 unsigned service_rxnotaal5;
266 unsigned dma_reenable;
267 unsigned card_reset;
268};
269
270struct lanai_dev {
271 bus_addr_t base;
272 struct lanai_dev_stats stats;
273 struct lanai_buffer service;
274 struct lanai_vcc **vccs;
275#ifdef USE_POWERDOWN
276 int nbound; /* number of bound vccs */
277#endif
278 enum lanai_type type;
279 vci_t num_vci; /* Currently just NUM_VCI */
280 u8 eeprom[LANAI_EEPROM_SIZE];
281 u32 serialno, magicno;
282 struct pci_dev *pci;
283 DECLARE_BITMAP(backlog_vccs, NUM_VCI); /* VCCs with tx backlog */
284 DECLARE_BITMAP(transmit_ready, NUM_VCI); /* VCCs with transmit space */
285 struct timer_list timer;
286 int naal0;
287 struct lanai_buffer aal0buf; /* AAL0 RX buffers */
288 u32 conf1, conf2; /* CONFIG[12] registers */
289 u32 status; /* STATUS register */
290 spinlock_t endtxlock;
291 spinlock_t servicelock;
292 struct atm_vcc *cbrvcc;
293 int number;
294 int board_rev;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700295/* TODO - look at race conditions with maintence of conf1/conf2 */
296/* TODO - transmit locking: should we use _irq not _irqsave? */
297/* TODO - organize above in some rational fashion (see <asm/cache.h>) */
298};
299
300/*
301 * Each device has two bitmaps for each VCC (baclog_vccs and transmit_ready)
302 * This function iterates one of these, calling a given function for each
303 * vci with their bit set
304 */
305static void vci_bitfield_iterate(struct lanai_dev *lanai,
Mitchell Blank Jrc22c28f2005-11-29 16:14:12 -0800306 const unsigned long *lp,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700307 void (*func)(struct lanai_dev *,vci_t vci))
308{
309 vci_t vci = find_first_bit(lp, NUM_VCI);
310 while (vci < NUM_VCI) {
311 func(lanai, vci);
312 vci = find_next_bit(lp, NUM_VCI, vci + 1);
313 }
314}
315
316/* -------------------- BUFFER UTILITIES: */
317
318/*
319 * Lanai needs DMA buffers aligned to 256 bytes of at least 1024 bytes -
320 * usually any page allocation will do. Just to be safe in case
321 * PAGE_SIZE is insanely tiny, though...
322 */
323#define LANAI_PAGE_SIZE ((PAGE_SIZE >= 1024) ? PAGE_SIZE : 1024)
324
325/*
326 * Allocate a buffer in host RAM for service list, RX, or TX
327 * Returns buf->start==NULL if no memory
328 * Note that the size will be rounded up 2^n bytes, and
329 * if we can't allocate that we'll settle for something smaller
330 * until minbytes
331 */
332static void lanai_buf_allocate(struct lanai_buffer *buf,
333 size_t bytes, size_t minbytes, struct pci_dev *pci)
334{
335 int size;
336
337 if (bytes > (128 * 1024)) /* max lanai buffer size */
338 bytes = 128 * 1024;
339 for (size = LANAI_PAGE_SIZE; size < bytes; size *= 2)
340 ;
341 if (minbytes < LANAI_PAGE_SIZE)
342 minbytes = LANAI_PAGE_SIZE;
343 do {
344 /*
345 * Technically we could use non-consistent mappings for
346 * everything, but the way the lanai uses DMA memory would
347 * make that a terrific pain. This is much simpler.
348 */
349 buf->start = pci_alloc_consistent(pci, size, &buf->dmaaddr);
350 if (buf->start != NULL) { /* Success */
351 /* Lanai requires 256-byte alignment of DMA bufs */
352 APRINTK((buf->dmaaddr & ~0xFFFFFF00) == 0,
353 "bad dmaaddr: 0x%lx\n",
354 (unsigned long) buf->dmaaddr);
355 buf->ptr = buf->start;
356 buf->end = (u32 *)
357 (&((unsigned char *) buf->start)[size]);
358 memset(buf->start, 0, size);
359 break;
360 }
361 size /= 2;
362 } while (size >= minbytes);
363}
364
365/* size of buffer in bytes */
366static inline size_t lanai_buf_size(const struct lanai_buffer *buf)
367{
368 return ((unsigned long) buf->end) - ((unsigned long) buf->start);
369}
370
371static void lanai_buf_deallocate(struct lanai_buffer *buf,
372 struct pci_dev *pci)
373{
374 if (buf->start != NULL) {
375 pci_free_consistent(pci, lanai_buf_size(buf),
376 buf->start, buf->dmaaddr);
377 buf->start = buf->end = buf->ptr = NULL;
378 }
379}
380
381/* size of buffer as "card order" (0=1k .. 7=128k) */
382static int lanai_buf_size_cardorder(const struct lanai_buffer *buf)
383{
384 int order = get_order(lanai_buf_size(buf)) + (PAGE_SHIFT - 10);
385
386 /* This can only happen if PAGE_SIZE is gigantic, but just in case */
387 if (order > 7)
388 order = 7;
389 return order;
390}
391
392/* -------------------- PORT I/O UTILITIES: */
393
394/* Registers (and their bit-fields) */
395enum lanai_register {
396 Reset_Reg = 0x00, /* Reset; read for chip type; bits: */
397#define RESET_GET_BOARD_REV(x) (((x)>> 0)&0x03) /* Board revision */
398#define RESET_GET_BOARD_ID(x) (((x)>> 2)&0x03) /* Board ID */
399#define BOARD_ID_LANAI256 (0) /* 25.6M adapter card */
400 Endian_Reg = 0x04, /* Endian setting */
401 IntStatus_Reg = 0x08, /* Interrupt status */
402 IntStatusMasked_Reg = 0x0C, /* Interrupt status (masked) */
403 IntAck_Reg = 0x10, /* Interrupt acknowledge */
404 IntAckMasked_Reg = 0x14, /* Interrupt acknowledge (masked) */
405 IntStatusSet_Reg = 0x18, /* Get status + enable/disable */
406 IntStatusSetMasked_Reg = 0x1C, /* Get status + en/di (masked) */
407 IntControlEna_Reg = 0x20, /* Interrupt control enable */
408 IntControlDis_Reg = 0x24, /* Interrupt control disable */
409 Status_Reg = 0x28, /* Status */
410#define STATUS_PROMDATA (0x00000001) /* PROM_DATA pin */
411#define STATUS_WAITING (0x00000002) /* Interrupt being delayed */
412#define STATUS_SOOL (0x00000004) /* SOOL alarm */
413#define STATUS_LOCD (0x00000008) /* LOCD alarm */
414#define STATUS_LED (0x00000010) /* LED (HAPPI) output */
415#define STATUS_GPIN (0x00000020) /* GPIN pin */
416#define STATUS_BUTTBUSY (0x00000040) /* Butt register is pending */
417 Config1_Reg = 0x2C, /* Config word 1; bits: */
418#define CONFIG1_PROMDATA (0x00000001) /* PROM_DATA pin */
419#define CONFIG1_PROMCLK (0x00000002) /* PROM_CLK pin */
420#define CONFIG1_SET_READMODE(x) ((x)*0x004) /* PCI BM reads; values: */
421#define READMODE_PLAIN (0) /* Plain memory read */
422#define READMODE_LINE (2) /* Memory read line */
423#define READMODE_MULTIPLE (3) /* Memory read multiple */
424#define CONFIG1_DMA_ENABLE (0x00000010) /* Turn on DMA */
425#define CONFIG1_POWERDOWN (0x00000020) /* Turn off clocks */
426#define CONFIG1_SET_LOOPMODE(x) ((x)*0x080) /* Clock&loop mode; values: */
427#define LOOPMODE_NORMAL (0) /* Normal - no loop */
428#define LOOPMODE_TIME (1)
429#define LOOPMODE_DIAG (2)
430#define LOOPMODE_LINE (3)
431#define CONFIG1_MASK_LOOPMODE (0x00000180)
432#define CONFIG1_SET_LEDMODE(x) ((x)*0x0200) /* Mode of LED; values: */
433#define LEDMODE_NOT_SOOL (0) /* !SOOL */
434#define LEDMODE_OFF (1) /* 0 */
435#define LEDMODE_ON (2) /* 1 */
436#define LEDMODE_NOT_LOCD (3) /* !LOCD */
437#define LEDMORE_GPIN (4) /* GPIN */
438#define LEDMODE_NOT_GPIN (7) /* !GPIN */
439#define CONFIG1_MASK_LEDMODE (0x00000E00)
440#define CONFIG1_GPOUT1 (0x00001000) /* Toggle for reset */
441#define CONFIG1_GPOUT2 (0x00002000) /* Loopback PHY */
442#define CONFIG1_GPOUT3 (0x00004000) /* Loopback lanai */
443 Config2_Reg = 0x30, /* Config word 2; bits: */
444#define CONFIG2_HOWMANY (0x00000001) /* >512 VCIs? */
445#define CONFIG2_PTI7_MODE (0x00000002) /* Make PTI=7 RM, not OAM */
446#define CONFIG2_VPI_CHK_DIS (0x00000004) /* Ignore RX VPI value */
447#define CONFIG2_HEC_DROP (0x00000008) /* Drop cells w/ HEC errors */
448#define CONFIG2_VCI0_NORMAL (0x00000010) /* Treat VCI=0 normally */
449#define CONFIG2_CBR_ENABLE (0x00000020) /* Deal with CBR traffic */
450#define CONFIG2_TRASH_ALL (0x00000040) /* Trashing incoming cells */
451#define CONFIG2_TX_DISABLE (0x00000080) /* Trashing outgoing cells */
452#define CONFIG2_SET_TRASH (0x00000100) /* Turn trashing on */
453 Statistics_Reg = 0x34, /* Statistics; bits: */
454#define STATS_GET_FIFO_OVFL(x) (((x)>> 0)&0xFF) /* FIFO overflowed */
455#define STATS_GET_HEC_ERR(x) (((x)>> 8)&0xFF) /* HEC was bad */
456#define STATS_GET_BAD_VCI(x) (((x)>>16)&0xFF) /* VCI not open */
457#define STATS_GET_BUF_OVFL(x) (((x)>>24)&0xFF) /* VCC buffer full */
458 ServiceStuff_Reg = 0x38, /* Service stuff; bits: */
459#define SSTUFF_SET_SIZE(x) ((x)*0x20000000) /* size of service buffer */
460#define SSTUFF_SET_ADDR(x) ((x)>>8) /* set address of buffer */
461 ServWrite_Reg = 0x3C, /* ServWrite Pointer */
462 ServRead_Reg = 0x40, /* ServRead Pointer */
463 TxDepth_Reg = 0x44, /* FIFO Transmit Depth */
464 Butt_Reg = 0x48, /* Butt register */
465 CBR_ICG_Reg = 0x50,
466 CBR_PTR_Reg = 0x54,
467 PingCount_Reg = 0x58, /* Ping count */
468 DMA_Addr_Reg = 0x5C /* DMA address */
469};
470
471static inline bus_addr_t reg_addr(const struct lanai_dev *lanai,
472 enum lanai_register reg)
473{
474 return lanai->base + reg;
475}
476
477static inline u32 reg_read(const struct lanai_dev *lanai,
478 enum lanai_register reg)
479{
480 u32 t;
481 t = readl(reg_addr(lanai, reg));
482 RWDEBUG("R [0x%08X] 0x%02X = 0x%08X\n", (unsigned int) lanai->base,
483 (int) reg, t);
484 return t;
485}
486
487static inline void reg_write(const struct lanai_dev *lanai, u32 val,
488 enum lanai_register reg)
489{
490 RWDEBUG("W [0x%08X] 0x%02X < 0x%08X\n", (unsigned int) lanai->base,
491 (int) reg, val);
492 writel(val, reg_addr(lanai, reg));
493}
494
495static inline void conf1_write(const struct lanai_dev *lanai)
496{
497 reg_write(lanai, lanai->conf1, Config1_Reg);
498}
499
500static inline void conf2_write(const struct lanai_dev *lanai)
501{
502 reg_write(lanai, lanai->conf2, Config2_Reg);
503}
504
505/* Same as conf2_write(), but defers I/O if we're powered down */
506static inline void conf2_write_if_powerup(const struct lanai_dev *lanai)
507{
508#ifdef USE_POWERDOWN
509 if (unlikely((lanai->conf1 & CONFIG1_POWERDOWN) != 0))
510 return;
511#endif /* USE_POWERDOWN */
512 conf2_write(lanai);
513}
514
515static inline void reset_board(const struct lanai_dev *lanai)
516{
517 DPRINTK("about to reset board\n");
518 reg_write(lanai, 0, Reset_Reg);
519 /*
520 * If we don't delay a little while here then we can end up
521 * leaving the card in a VERY weird state and lock up the
522 * PCI bus. This isn't documented anywhere but I've convinced
523 * myself after a lot of painful experimentation
524 */
525 udelay(5);
526}
527
528/* -------------------- CARD SRAM UTILITIES: */
529
530/* The SRAM is mapped into normal PCI memory space - the only catch is
531 * that it is only 16-bits wide but must be accessed as 32-bit. The
532 * 16 high bits will be zero. We don't hide this, since they get
533 * programmed mostly like discrete registers anyway
534 */
535#define SRAM_START (0x20000)
536#define SRAM_BYTES (0x20000) /* Again, half don't really exist */
537
538static inline bus_addr_t sram_addr(const struct lanai_dev *lanai, int offset)
539{
540 return lanai->base + SRAM_START + offset;
541}
542
543static inline u32 sram_read(const struct lanai_dev *lanai, int offset)
544{
545 return readl(sram_addr(lanai, offset));
546}
547
548static inline void sram_write(const struct lanai_dev *lanai,
549 u32 val, int offset)
550{
551 writel(val, sram_addr(lanai, offset));
552}
553
Adrian Bunkde24a192007-07-16 18:34:04 -0700554static int __devinit sram_test_word(const struct lanai_dev *lanai,
555 int offset, u32 pattern)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700556{
557 u32 readback;
558 sram_write(lanai, pattern, offset);
559 readback = sram_read(lanai, offset);
560 if (likely(readback == pattern))
561 return 0;
562 printk(KERN_ERR DEV_LABEL
563 "(itf %d): SRAM word at %d bad: wrote 0x%X, read 0x%X\n",
564 lanai->number, offset,
565 (unsigned int) pattern, (unsigned int) readback);
566 return -EIO;
567}
568
569static int __devinit sram_test_pass(const struct lanai_dev *lanai, u32 pattern)
570{
571 int offset, result = 0;
572 for (offset = 0; offset < SRAM_BYTES && result == 0; offset += 4)
573 result = sram_test_word(lanai, offset, pattern);
574 return result;
575}
576
577static int __devinit sram_test_and_clear(const struct lanai_dev *lanai)
578{
579#ifdef FULL_MEMORY_TEST
580 int result;
581 DPRINTK("testing SRAM\n");
582 if ((result = sram_test_pass(lanai, 0x5555)) != 0)
583 return result;
584 if ((result = sram_test_pass(lanai, 0xAAAA)) != 0)
585 return result;
586#endif
587 DPRINTK("clearing SRAM\n");
588 return sram_test_pass(lanai, 0x0000);
589}
590
591/* -------------------- CARD-BASED VCC TABLE UTILITIES: */
592
593/* vcc table */
594enum lanai_vcc_offset {
595 vcc_rxaddr1 = 0x00, /* Location1, plus bits: */
596#define RXADDR1_SET_SIZE(x) ((x)*0x0000100) /* size of RX buffer */
597#define RXADDR1_SET_RMMODE(x) ((x)*0x00800) /* RM cell action; values: */
598#define RMMODE_TRASH (0) /* discard */
599#define RMMODE_PRESERVE (1) /* input as AAL0 */
600#define RMMODE_PIPE (2) /* pipe to coscheduler */
601#define RMMODE_PIPEALL (3) /* pipe non-RM too */
602#define RXADDR1_OAM_PRESERVE (0x00002000) /* Input OAM cells as AAL0 */
603#define RXADDR1_SET_MODE(x) ((x)*0x0004000) /* Reassembly mode */
604#define RXMODE_TRASH (0) /* discard */
605#define RXMODE_AAL0 (1) /* non-AAL5 mode */
606#define RXMODE_AAL5 (2) /* AAL5, intr. each PDU */
607#define RXMODE_AAL5_STREAM (3) /* AAL5 w/o per-PDU intr */
608 vcc_rxaddr2 = 0x04, /* Location2 */
609 vcc_rxcrc1 = 0x08, /* RX CRC claculation space */
610 vcc_rxcrc2 = 0x0C,
611 vcc_rxwriteptr = 0x10, /* RX writeptr, plus bits: */
612#define RXWRITEPTR_LASTEFCI (0x00002000) /* Last PDU had EFCI bit */
613#define RXWRITEPTR_DROPPING (0x00004000) /* Had error, dropping */
614#define RXWRITEPTR_TRASHING (0x00008000) /* Trashing */
615 vcc_rxbufstart = 0x14, /* RX bufstart, plus bits: */
616#define RXBUFSTART_CLP (0x00004000)
617#define RXBUFSTART_CI (0x00008000)
618 vcc_rxreadptr = 0x18, /* RX readptr */
619 vcc_txicg = 0x1C, /* TX ICG */
620 vcc_txaddr1 = 0x20, /* Location1, plus bits: */
621#define TXADDR1_SET_SIZE(x) ((x)*0x0000100) /* size of TX buffer */
622#define TXADDR1_ABR (0x00008000) /* use ABR (doesn't work) */
623 vcc_txaddr2 = 0x24, /* Location2 */
624 vcc_txcrc1 = 0x28, /* TX CRC claculation space */
625 vcc_txcrc2 = 0x2C,
626 vcc_txreadptr = 0x30, /* TX Readptr, plus bits: */
627#define TXREADPTR_GET_PTR(x) ((x)&0x01FFF)
628#define TXREADPTR_MASK_DELTA (0x0000E000) /* ? */
629 vcc_txendptr = 0x34, /* TX Endptr, plus bits: */
630#define TXENDPTR_CLP (0x00002000)
631#define TXENDPTR_MASK_PDUMODE (0x0000C000) /* PDU mode; values: */
632#define PDUMODE_AAL0 (0*0x04000)
633#define PDUMODE_AAL5 (2*0x04000)
634#define PDUMODE_AAL5STREAM (3*0x04000)
635 vcc_txwriteptr = 0x38, /* TX Writeptr */
636#define TXWRITEPTR_GET_PTR(x) ((x)&0x1FFF)
637 vcc_txcbr_next = 0x3C /* # of next CBR VCI in ring */
638#define TXCBR_NEXT_BOZO (0x00008000) /* "bozo bit" */
639};
640
641#define CARDVCC_SIZE (0x40)
642
643static inline bus_addr_t cardvcc_addr(const struct lanai_dev *lanai,
644 vci_t vci)
645{
646 return sram_addr(lanai, vci * CARDVCC_SIZE);
647}
648
649static inline u32 cardvcc_read(const struct lanai_vcc *lvcc,
650 enum lanai_vcc_offset offset)
651{
652 u32 val;
653 APRINTK(lvcc->vbase != NULL, "cardvcc_read: unbound vcc!\n");
654 val= readl(lvcc->vbase + offset);
655 RWDEBUG("VR vci=%04d 0x%02X = 0x%08X\n",
656 lvcc->vci, (int) offset, val);
657 return val;
658}
659
660static inline void cardvcc_write(const struct lanai_vcc *lvcc,
661 u32 val, enum lanai_vcc_offset offset)
662{
663 APRINTK(lvcc->vbase != NULL, "cardvcc_write: unbound vcc!\n");
664 APRINTK((val & ~0xFFFF) == 0,
665 "cardvcc_write: bad val 0x%X (vci=%d, addr=0x%02X)\n",
666 (unsigned int) val, lvcc->vci, (unsigned int) offset);
667 RWDEBUG("VW vci=%04d 0x%02X > 0x%08X\n",
668 lvcc->vci, (unsigned int) offset, (unsigned int) val);
669 writel(val, lvcc->vbase + offset);
670}
671
672/* -------------------- COMPUTE SIZE OF AN AAL5 PDU: */
673
674/* How many bytes will an AAL5 PDU take to transmit - remember that:
675 * o we need to add 8 bytes for length, CPI, UU, and CRC
676 * o we need to round up to 48 bytes for cells
677 */
678static inline int aal5_size(int size)
679{
680 int cells = (size + 8 + 47) / 48;
681 return cells * 48;
682}
683
684/* How many bytes can we send if we have "space" space, assuming we have
685 * to send full cells
686 */
687static inline int aal5_spacefor(int space)
688{
689 int cells = space / 48;
690 return cells * 48;
691}
692
693/* -------------------- FREE AN ATM SKB: */
694
695static inline void lanai_free_skb(struct atm_vcc *atmvcc, struct sk_buff *skb)
696{
697 if (atmvcc->pop != NULL)
698 atmvcc->pop(atmvcc, skb);
699 else
700 dev_kfree_skb_any(skb);
701}
702
703/* -------------------- TURN VCCS ON AND OFF: */
704
705static void host_vcc_start_rx(const struct lanai_vcc *lvcc)
706{
707 u32 addr1;
708 if (lvcc->rx.atmvcc->qos.aal == ATM_AAL5) {
709 dma_addr_t dmaaddr = lvcc->rx.buf.dmaaddr;
710 cardvcc_write(lvcc, 0xFFFF, vcc_rxcrc1);
711 cardvcc_write(lvcc, 0xFFFF, vcc_rxcrc2);
712 cardvcc_write(lvcc, 0, vcc_rxwriteptr);
713 cardvcc_write(lvcc, 0, vcc_rxbufstart);
714 cardvcc_write(lvcc, 0, vcc_rxreadptr);
715 cardvcc_write(lvcc, (dmaaddr >> 16) & 0xFFFF, vcc_rxaddr2);
716 addr1 = ((dmaaddr >> 8) & 0xFF) |
717 RXADDR1_SET_SIZE(lanai_buf_size_cardorder(&lvcc->rx.buf))|
718 RXADDR1_SET_RMMODE(RMMODE_TRASH) | /* ??? */
719 /* RXADDR1_OAM_PRESERVE | --- no OAM support yet */
720 RXADDR1_SET_MODE(RXMODE_AAL5);
721 } else
722 addr1 = RXADDR1_SET_RMMODE(RMMODE_PRESERVE) | /* ??? */
723 RXADDR1_OAM_PRESERVE | /* ??? */
724 RXADDR1_SET_MODE(RXMODE_AAL0);
725 /* This one must be last! */
726 cardvcc_write(lvcc, addr1, vcc_rxaddr1);
727}
728
729static void host_vcc_start_tx(const struct lanai_vcc *lvcc)
730{
731 dma_addr_t dmaaddr = lvcc->tx.buf.dmaaddr;
732 cardvcc_write(lvcc, 0, vcc_txicg);
733 cardvcc_write(lvcc, 0xFFFF, vcc_txcrc1);
734 cardvcc_write(lvcc, 0xFFFF, vcc_txcrc2);
735 cardvcc_write(lvcc, 0, vcc_txreadptr);
736 cardvcc_write(lvcc, 0, vcc_txendptr);
737 cardvcc_write(lvcc, 0, vcc_txwriteptr);
738 cardvcc_write(lvcc,
739 (lvcc->tx.atmvcc->qos.txtp.traffic_class == ATM_CBR) ?
740 TXCBR_NEXT_BOZO | lvcc->vci : 0, vcc_txcbr_next);
741 cardvcc_write(lvcc, (dmaaddr >> 16) & 0xFFFF, vcc_txaddr2);
742 cardvcc_write(lvcc,
743 ((dmaaddr >> 8) & 0xFF) |
744 TXADDR1_SET_SIZE(lanai_buf_size_cardorder(&lvcc->tx.buf)),
745 vcc_txaddr1);
746}
747
748/* Shutdown receiving on card */
749static void lanai_shutdown_rx_vci(const struct lanai_vcc *lvcc)
750{
751 if (lvcc->vbase == NULL) /* We were never bound to a VCI */
752 return;
753 /* 15.1.1 - set to trashing, wait one cell time (15us) */
754 cardvcc_write(lvcc,
755 RXADDR1_SET_RMMODE(RMMODE_TRASH) |
756 RXADDR1_SET_MODE(RXMODE_TRASH), vcc_rxaddr1);
757 udelay(15);
758 /* 15.1.2 - clear rest of entries */
759 cardvcc_write(lvcc, 0, vcc_rxaddr2);
760 cardvcc_write(lvcc, 0, vcc_rxcrc1);
761 cardvcc_write(lvcc, 0, vcc_rxcrc2);
762 cardvcc_write(lvcc, 0, vcc_rxwriteptr);
763 cardvcc_write(lvcc, 0, vcc_rxbufstart);
764 cardvcc_write(lvcc, 0, vcc_rxreadptr);
765}
766
767/* Shutdown transmitting on card.
768 * Unfortunately the lanai needs us to wait until all the data
769 * drains out of the buffer before we can dealloc it, so this
770 * can take awhile -- up to 370ms for a full 128KB buffer
771 * assuming everone else is quiet. In theory the time is
772 * boundless if there's a CBR VCC holding things up.
773 */
774static void lanai_shutdown_tx_vci(struct lanai_dev *lanai,
775 struct lanai_vcc *lvcc)
776{
777 struct sk_buff *skb;
778 unsigned long flags, timeout;
779 int read, write, lastread = -1;
780 APRINTK(!in_interrupt(),
781 "lanai_shutdown_tx_vci called w/o process context!\n");
782 if (lvcc->vbase == NULL) /* We were never bound to a VCI */
783 return;
784 /* 15.2.1 - wait for queue to drain */
785 while ((skb = skb_dequeue(&lvcc->tx.backlog)) != NULL)
786 lanai_free_skb(lvcc->tx.atmvcc, skb);
787 read_lock_irqsave(&vcc_sklist_lock, flags);
788 __clear_bit(lvcc->vci, lanai->backlog_vccs);
789 read_unlock_irqrestore(&vcc_sklist_lock, flags);
790 /*
791 * We need to wait for the VCC to drain but don't wait forever. We
792 * give each 1K of buffer size 1/128th of a second to clear out.
793 * TODO: maybe disable CBR if we're about to timeout?
794 */
795 timeout = jiffies +
796 (((lanai_buf_size(&lvcc->tx.buf) / 1024) * HZ) >> 7);
797 write = TXWRITEPTR_GET_PTR(cardvcc_read(lvcc, vcc_txwriteptr));
798 for (;;) {
799 read = TXREADPTR_GET_PTR(cardvcc_read(lvcc, vcc_txreadptr));
800 if (read == write && /* Is TX buffer empty? */
801 (lvcc->tx.atmvcc->qos.txtp.traffic_class != ATM_CBR ||
802 (cardvcc_read(lvcc, vcc_txcbr_next) &
803 TXCBR_NEXT_BOZO) == 0))
804 break;
805 if (read != lastread) { /* Has there been any progress? */
806 lastread = read;
807 timeout += HZ / 10;
808 }
809 if (unlikely(time_after(jiffies, timeout))) {
810 printk(KERN_ERR DEV_LABEL "(itf %d): Timed out on "
811 "backlog closing vci %d\n",
812 lvcc->tx.atmvcc->dev->number, lvcc->vci);
813 DPRINTK("read, write = %d, %d\n", read, write);
814 break;
815 }
816 msleep(40);
817 }
818 /* 15.2.2 - clear out all tx registers */
819 cardvcc_write(lvcc, 0, vcc_txreadptr);
820 cardvcc_write(lvcc, 0, vcc_txwriteptr);
821 cardvcc_write(lvcc, 0, vcc_txendptr);
822 cardvcc_write(lvcc, 0, vcc_txcrc1);
823 cardvcc_write(lvcc, 0, vcc_txcrc2);
824 cardvcc_write(lvcc, 0, vcc_txaddr2);
825 cardvcc_write(lvcc, 0, vcc_txaddr1);
826}
827
828/* -------------------- MANAGING AAL0 RX BUFFER: */
829
830static inline int aal0_buffer_allocate(struct lanai_dev *lanai)
831{
832 DPRINTK("aal0_buffer_allocate: allocating AAL0 RX buffer\n");
833 lanai_buf_allocate(&lanai->aal0buf, AAL0_RX_BUFFER_SIZE, 80,
834 lanai->pci);
835 return (lanai->aal0buf.start == NULL) ? -ENOMEM : 0;
836}
837
838static inline void aal0_buffer_free(struct lanai_dev *lanai)
839{
840 DPRINTK("aal0_buffer_allocate: freeing AAL0 RX buffer\n");
841 lanai_buf_deallocate(&lanai->aal0buf, lanai->pci);
842}
843
844/* -------------------- EEPROM UTILITIES: */
845
846/* Offsets of data in the EEPROM */
847#define EEPROM_COPYRIGHT (0)
848#define EEPROM_COPYRIGHT_LEN (44)
849#define EEPROM_CHECKSUM (62)
850#define EEPROM_CHECKSUM_REV (63)
851#define EEPROM_MAC (64)
852#define EEPROM_MAC_REV (70)
853#define EEPROM_SERIAL (112)
854#define EEPROM_SERIAL_REV (116)
855#define EEPROM_MAGIC (120)
856#define EEPROM_MAGIC_REV (124)
857
858#define EEPROM_MAGIC_VALUE (0x5AB478D2)
859
860#ifndef READ_EEPROM
861
862/* Stub functions to use if EEPROM reading is disabled */
863static int __devinit eeprom_read(struct lanai_dev *lanai)
864{
865 printk(KERN_INFO DEV_LABEL "(itf %d): *NOT* reading EEPROM\n",
866 lanai->number);
867 memset(&lanai->eeprom[EEPROM_MAC], 0, 6);
868 return 0;
869}
870
871static int __devinit eeprom_validate(struct lanai_dev *lanai)
872{
873 lanai->serialno = 0;
874 lanai->magicno = EEPROM_MAGIC_VALUE;
875 return 0;
876}
877
878#else /* READ_EEPROM */
879
880static int __devinit eeprom_read(struct lanai_dev *lanai)
881{
882 int i, address;
883 u8 data;
884 u32 tmp;
885#define set_config1(x) do { lanai->conf1 = x; conf1_write(lanai); \
886 } while (0)
887#define clock_h() set_config1(lanai->conf1 | CONFIG1_PROMCLK)
888#define clock_l() set_config1(lanai->conf1 &~ CONFIG1_PROMCLK)
889#define data_h() set_config1(lanai->conf1 | CONFIG1_PROMDATA)
890#define data_l() set_config1(lanai->conf1 &~ CONFIG1_PROMDATA)
891#define pre_read() do { data_h(); clock_h(); udelay(5); } while (0)
892#define read_pin() (reg_read(lanai, Status_Reg) & STATUS_PROMDATA)
893#define send_stop() do { data_l(); udelay(5); clock_h(); udelay(5); \
894 data_h(); udelay(5); } while (0)
895 /* start with both clock and data high */
896 data_h(); clock_h(); udelay(5);
897 for (address = 0; address < LANAI_EEPROM_SIZE; address++) {
898 data = (address << 1) | 1; /* Command=read + address */
899 /* send start bit */
900 data_l(); udelay(5);
901 clock_l(); udelay(5);
902 for (i = 128; i != 0; i >>= 1) { /* write command out */
903 tmp = (lanai->conf1 & ~CONFIG1_PROMDATA) |
Roel Kluin858671f2009-02-18 17:41:38 -0800904 ((data & i) ? CONFIG1_PROMDATA : 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700905 if (lanai->conf1 != tmp) {
906 set_config1(tmp);
907 udelay(5); /* Let new data settle */
908 }
909 clock_h(); udelay(5); clock_l(); udelay(5);
910 }
911 /* look for ack */
912 data_h(); clock_h(); udelay(5);
913 if (read_pin() != 0)
914 goto error; /* No ack seen */
915 clock_l(); udelay(5);
916 /* read back result */
917 for (data = 0, i = 7; i >= 0; i--) {
918 data_h(); clock_h(); udelay(5);
919 data = (data << 1) | !!read_pin();
920 clock_l(); udelay(5);
921 }
922 /* look again for ack */
923 data_h(); clock_h(); udelay(5);
924 if (read_pin() == 0)
925 goto error; /* Spurious ack */
926 clock_l(); udelay(5);
927 send_stop();
928 lanai->eeprom[address] = data;
929 DPRINTK("EEPROM 0x%04X %02X\n",
930 (unsigned int) address, (unsigned int) data);
931 }
932 return 0;
933 error:
934 clock_l(); udelay(5); /* finish read */
935 send_stop();
936 printk(KERN_ERR DEV_LABEL "(itf %d): error reading EEPROM byte %d\n",
937 lanai->number, address);
938 return -EIO;
939#undef set_config1
940#undef clock_h
941#undef clock_l
942#undef data_h
943#undef data_l
944#undef pre_read
945#undef read_pin
946#undef send_stop
947}
948
949/* read a big-endian 4-byte value out of eeprom */
950static inline u32 eeprom_be4(const struct lanai_dev *lanai, int address)
951{
Mitchell Blank Jrc22c28f2005-11-29 16:14:12 -0800952 return be32_to_cpup((const u32 *) &lanai->eeprom[address]);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700953}
954
955/* Checksum/validate EEPROM contents */
956static int __devinit eeprom_validate(struct lanai_dev *lanai)
957{
958 int i, s;
959 u32 v;
960 const u8 *e = lanai->eeprom;
961#ifdef DEBUG
962 /* First, see if we can get an ASCIIZ string out of the copyright */
963 for (i = EEPROM_COPYRIGHT;
964 i < (EEPROM_COPYRIGHT + EEPROM_COPYRIGHT_LEN); i++)
965 if (e[i] < 0x20 || e[i] > 0x7E)
966 break;
967 if ( i != EEPROM_COPYRIGHT &&
968 i != EEPROM_COPYRIGHT + EEPROM_COPYRIGHT_LEN && e[i] == '\0')
969 DPRINTK("eeprom: copyright = \"%s\"\n",
970 (char *) &e[EEPROM_COPYRIGHT]);
971 else
972 DPRINTK("eeprom: copyright not found\n");
973#endif
974 /* Validate checksum */
975 for (i = s = 0; i < EEPROM_CHECKSUM; i++)
976 s += e[i];
977 s &= 0xFF;
978 if (s != e[EEPROM_CHECKSUM]) {
979 printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM checksum bad "
980 "(wanted 0x%02X, got 0x%02X)\n", lanai->number,
981 (unsigned int) s, (unsigned int) e[EEPROM_CHECKSUM]);
982 return -EIO;
983 }
984 s ^= 0xFF;
985 if (s != e[EEPROM_CHECKSUM_REV]) {
986 printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM inverse checksum "
987 "bad (wanted 0x%02X, got 0x%02X)\n", lanai->number,
988 (unsigned int) s, (unsigned int) e[EEPROM_CHECKSUM_REV]);
989 return -EIO;
990 }
991 /* Verify MAC address */
992 for (i = 0; i < 6; i++)
993 if ((e[EEPROM_MAC + i] ^ e[EEPROM_MAC_REV + i]) != 0xFF) {
994 printk(KERN_ERR DEV_LABEL
995 "(itf %d) : EEPROM MAC addresses don't match "
996 "(0x%02X, inverse 0x%02X)\n", lanai->number,
997 (unsigned int) e[EEPROM_MAC + i],
998 (unsigned int) e[EEPROM_MAC_REV + i]);
999 return -EIO;
1000 }
1001 DPRINTK("eeprom: MAC address = %02X:%02X:%02X:%02X:%02X:%02X\n",
1002 e[EEPROM_MAC + 0], e[EEPROM_MAC + 1], e[EEPROM_MAC + 2],
1003 e[EEPROM_MAC + 3], e[EEPROM_MAC + 4], e[EEPROM_MAC + 5]);
1004 /* Verify serial number */
1005 lanai->serialno = eeprom_be4(lanai, EEPROM_SERIAL);
1006 v = eeprom_be4(lanai, EEPROM_SERIAL_REV);
1007 if ((lanai->serialno ^ v) != 0xFFFFFFFF) {
1008 printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM serial numbers "
1009 "don't match (0x%08X, inverse 0x%08X)\n", lanai->number,
1010 (unsigned int) lanai->serialno, (unsigned int) v);
1011 return -EIO;
1012 }
1013 DPRINTK("eeprom: Serial number = %d\n", (unsigned int) lanai->serialno);
1014 /* Verify magic number */
1015 lanai->magicno = eeprom_be4(lanai, EEPROM_MAGIC);
1016 v = eeprom_be4(lanai, EEPROM_MAGIC_REV);
1017 if ((lanai->magicno ^ v) != 0xFFFFFFFF) {
1018 printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM magic numbers "
1019 "don't match (0x%08X, inverse 0x%08X)\n", lanai->number,
1020 lanai->magicno, v);
1021 return -EIO;
1022 }
1023 DPRINTK("eeprom: Magic number = 0x%08X\n", lanai->magicno);
1024 if (lanai->magicno != EEPROM_MAGIC_VALUE)
1025 printk(KERN_WARNING DEV_LABEL "(itf %d): warning - EEPROM "
1026 "magic not what expected (got 0x%08X, not 0x%08X)\n",
1027 lanai->number, (unsigned int) lanai->magicno,
1028 (unsigned int) EEPROM_MAGIC_VALUE);
1029 return 0;
1030}
1031
1032#endif /* READ_EEPROM */
1033
1034static inline const u8 *eeprom_mac(const struct lanai_dev *lanai)
1035{
1036 return &lanai->eeprom[EEPROM_MAC];
1037}
1038
1039/* -------------------- INTERRUPT HANDLING UTILITIES: */
1040
1041/* Interrupt types */
1042#define INT_STATS (0x00000002) /* Statistics counter overflow */
1043#define INT_SOOL (0x00000004) /* SOOL changed state */
1044#define INT_LOCD (0x00000008) /* LOCD changed state */
1045#define INT_LED (0x00000010) /* LED (HAPPI) changed state */
1046#define INT_GPIN (0x00000020) /* GPIN changed state */
1047#define INT_PING (0x00000040) /* PING_COUNT fulfilled */
1048#define INT_WAKE (0x00000080) /* Lanai wants bus */
1049#define INT_CBR0 (0x00000100) /* CBR sched hit VCI 0 */
1050#define INT_LOCK (0x00000200) /* Service list overflow */
1051#define INT_MISMATCH (0x00000400) /* TX magic list mismatch */
1052#define INT_AAL0_STR (0x00000800) /* Non-AAL5 buffer half filled */
1053#define INT_AAL0 (0x00001000) /* Non-AAL5 data available */
1054#define INT_SERVICE (0x00002000) /* Service list entries available */
1055#define INT_TABORTSENT (0x00004000) /* Target abort sent by lanai */
1056#define INT_TABORTBM (0x00008000) /* Abort rcv'd as bus master */
1057#define INT_TIMEOUTBM (0x00010000) /* No response to bus master */
1058#define INT_PCIPARITY (0x00020000) /* Parity error on PCI */
1059
1060/* Sets of the above */
1061#define INT_ALL (0x0003FFFE) /* All interrupts */
1062#define INT_STATUS (0x0000003C) /* Some status pin changed */
1063#define INT_DMASHUT (0x00038000) /* DMA engine got shut down */
1064#define INT_SEGSHUT (0x00000700) /* Segmentation got shut down */
1065
1066static inline u32 intr_pending(const struct lanai_dev *lanai)
1067{
1068 return reg_read(lanai, IntStatusMasked_Reg);
1069}
1070
1071static inline void intr_enable(const struct lanai_dev *lanai, u32 i)
1072{
1073 reg_write(lanai, i, IntControlEna_Reg);
1074}
1075
1076static inline void intr_disable(const struct lanai_dev *lanai, u32 i)
1077{
1078 reg_write(lanai, i, IntControlDis_Reg);
1079}
1080
1081/* -------------------- CARD/PCI STATUS: */
1082
1083static void status_message(int itf, const char *name, int status)
1084{
1085 static const char *onoff[2] = { "off to on", "on to off" };
1086 printk(KERN_INFO DEV_LABEL "(itf %d): %s changed from %s\n",
1087 itf, name, onoff[!status]);
1088}
1089
1090static void lanai_check_status(struct lanai_dev *lanai)
1091{
1092 u32 new = reg_read(lanai, Status_Reg);
1093 u32 changes = new ^ lanai->status;
1094 lanai->status = new;
1095#define e(flag, name) \
1096 if (changes & flag) \
1097 status_message(lanai->number, name, new & flag)
1098 e(STATUS_SOOL, "SOOL");
1099 e(STATUS_LOCD, "LOCD");
1100 e(STATUS_LED, "LED");
1101 e(STATUS_GPIN, "GPIN");
1102#undef e
1103}
1104
1105static void pcistatus_got(int itf, const char *name)
1106{
1107 printk(KERN_INFO DEV_LABEL "(itf %d): PCI got %s error\n", itf, name);
1108}
1109
1110static void pcistatus_check(struct lanai_dev *lanai, int clearonly)
1111{
1112 u16 s;
1113 int result;
1114 result = pci_read_config_word(lanai->pci, PCI_STATUS, &s);
1115 if (result != PCIBIOS_SUCCESSFUL) {
1116 printk(KERN_ERR DEV_LABEL "(itf %d): can't read PCI_STATUS: "
1117 "%d\n", lanai->number, result);
1118 return;
1119 }
1120 s &= PCI_STATUS_DETECTED_PARITY | PCI_STATUS_SIG_SYSTEM_ERROR |
1121 PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_REC_TARGET_ABORT |
1122 PCI_STATUS_SIG_TARGET_ABORT | PCI_STATUS_PARITY;
1123 if (s == 0)
1124 return;
1125 result = pci_write_config_word(lanai->pci, PCI_STATUS, s);
1126 if (result != PCIBIOS_SUCCESSFUL)
1127 printk(KERN_ERR DEV_LABEL "(itf %d): can't write PCI_STATUS: "
1128 "%d\n", lanai->number, result);
1129 if (clearonly)
1130 return;
1131#define e(flag, name, stat) \
1132 if (s & flag) { \
1133 pcistatus_got(lanai->number, name); \
1134 ++lanai->stats.pcierr_##stat; \
1135 }
1136 e(PCI_STATUS_DETECTED_PARITY, "parity", parity_detect);
1137 e(PCI_STATUS_SIG_SYSTEM_ERROR, "signalled system", serr_set);
1138 e(PCI_STATUS_REC_MASTER_ABORT, "master", master_abort);
1139 e(PCI_STATUS_REC_TARGET_ABORT, "master target", m_target_abort);
1140 e(PCI_STATUS_SIG_TARGET_ABORT, "slave", s_target_abort);
1141 e(PCI_STATUS_PARITY, "master parity", master_parity);
1142#undef e
1143}
1144
1145/* -------------------- VCC TX BUFFER UTILITIES: */
1146
1147/* space left in tx buffer in bytes */
1148static inline int vcc_tx_space(const struct lanai_vcc *lvcc, int endptr)
1149{
1150 int r;
1151 r = endptr * 16;
1152 r -= ((unsigned long) lvcc->tx.buf.ptr) -
1153 ((unsigned long) lvcc->tx.buf.start);
1154 r -= 16; /* Leave "bubble" - if start==end it looks empty */
1155 if (r < 0)
1156 r += lanai_buf_size(&lvcc->tx.buf);
1157 return r;
1158}
1159
1160/* test if VCC is currently backlogged */
Mitchell Blank Jrc22c28f2005-11-29 16:14:12 -08001161static inline int vcc_is_backlogged(const struct lanai_vcc *lvcc)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001162{
1163 return !skb_queue_empty(&lvcc->tx.backlog);
1164}
1165
1166/* Bit fields in the segmentation buffer descriptor */
1167#define DESCRIPTOR_MAGIC (0xD0000000)
1168#define DESCRIPTOR_AAL5 (0x00008000)
1169#define DESCRIPTOR_AAL5_STREAM (0x00004000)
1170#define DESCRIPTOR_CLP (0x00002000)
1171
1172/* Add 32-bit descriptor with its padding */
1173static inline void vcc_tx_add_aal5_descriptor(struct lanai_vcc *lvcc,
1174 u32 flags, int len)
1175{
1176 int pos;
1177 APRINTK((((unsigned long) lvcc->tx.buf.ptr) & 15) == 0,
1178 "vcc_tx_add_aal5_descriptor: bad ptr=%p\n", lvcc->tx.buf.ptr);
1179 lvcc->tx.buf.ptr += 4; /* Hope the values REALLY don't matter */
1180 pos = ((unsigned char *) lvcc->tx.buf.ptr) -
1181 (unsigned char *) lvcc->tx.buf.start;
1182 APRINTK((pos & ~0x0001FFF0) == 0,
1183 "vcc_tx_add_aal5_descriptor: bad pos (%d) before, vci=%d, "
1184 "start,ptr,end=%p,%p,%p\n", pos, lvcc->vci,
1185 lvcc->tx.buf.start, lvcc->tx.buf.ptr, lvcc->tx.buf.end);
1186 pos = (pos + len) & (lanai_buf_size(&lvcc->tx.buf) - 1);
1187 APRINTK((pos & ~0x0001FFF0) == 0,
1188 "vcc_tx_add_aal5_descriptor: bad pos (%d) after, vci=%d, "
1189 "start,ptr,end=%p,%p,%p\n", pos, lvcc->vci,
1190 lvcc->tx.buf.start, lvcc->tx.buf.ptr, lvcc->tx.buf.end);
1191 lvcc->tx.buf.ptr[-1] =
1192 cpu_to_le32(DESCRIPTOR_MAGIC | DESCRIPTOR_AAL5 |
1193 ((lvcc->tx.atmvcc->atm_options & ATM_ATMOPT_CLP) ?
1194 DESCRIPTOR_CLP : 0) | flags | pos >> 4);
1195 if (lvcc->tx.buf.ptr >= lvcc->tx.buf.end)
1196 lvcc->tx.buf.ptr = lvcc->tx.buf.start;
1197}
1198
1199/* Add 32-bit AAL5 trailer and leave room for its CRC */
1200static inline void vcc_tx_add_aal5_trailer(struct lanai_vcc *lvcc,
1201 int len, int cpi, int uu)
1202{
1203 APRINTK((((unsigned long) lvcc->tx.buf.ptr) & 15) == 8,
1204 "vcc_tx_add_aal5_trailer: bad ptr=%p\n", lvcc->tx.buf.ptr);
1205 lvcc->tx.buf.ptr += 2;
1206 lvcc->tx.buf.ptr[-2] = cpu_to_be32((uu << 24) | (cpi << 16) | len);
1207 if (lvcc->tx.buf.ptr >= lvcc->tx.buf.end)
1208 lvcc->tx.buf.ptr = lvcc->tx.buf.start;
1209}
1210
1211static inline void vcc_tx_memcpy(struct lanai_vcc *lvcc,
1212 const unsigned char *src, int n)
1213{
1214 unsigned char *e;
1215 int m;
1216 e = ((unsigned char *) lvcc->tx.buf.ptr) + n;
1217 m = e - (unsigned char *) lvcc->tx.buf.end;
1218 if (m < 0)
1219 m = 0;
1220 memcpy(lvcc->tx.buf.ptr, src, n - m);
1221 if (m != 0) {
1222 memcpy(lvcc->tx.buf.start, src + n - m, m);
1223 e = ((unsigned char *) lvcc->tx.buf.start) + m;
1224 }
1225 lvcc->tx.buf.ptr = (u32 *) e;
1226}
1227
1228static inline void vcc_tx_memzero(struct lanai_vcc *lvcc, int n)
1229{
1230 unsigned char *e;
1231 int m;
1232 if (n == 0)
1233 return;
1234 e = ((unsigned char *) lvcc->tx.buf.ptr) + n;
1235 m = e - (unsigned char *) lvcc->tx.buf.end;
1236 if (m < 0)
1237 m = 0;
1238 memset(lvcc->tx.buf.ptr, 0, n - m);
1239 if (m != 0) {
1240 memset(lvcc->tx.buf.start, 0, m);
1241 e = ((unsigned char *) lvcc->tx.buf.start) + m;
1242 }
1243 lvcc->tx.buf.ptr = (u32 *) e;
1244}
1245
1246/* Update "butt" register to specify new WritePtr */
1247static inline void lanai_endtx(struct lanai_dev *lanai,
1248 const struct lanai_vcc *lvcc)
1249{
1250 int i, ptr = ((unsigned char *) lvcc->tx.buf.ptr) -
1251 (unsigned char *) lvcc->tx.buf.start;
1252 APRINTK((ptr & ~0x0001FFF0) == 0,
1253 "lanai_endtx: bad ptr (%d), vci=%d, start,ptr,end=%p,%p,%p\n",
1254 ptr, lvcc->vci, lvcc->tx.buf.start, lvcc->tx.buf.ptr,
1255 lvcc->tx.buf.end);
1256
1257 /*
1258 * Since the "butt register" is a shared resounce on the card we
1259 * serialize all accesses to it through this spinlock. This is
1260 * mostly just paranoia sicne the register is rarely "busy" anyway
1261 * but is needed for correctness.
1262 */
1263 spin_lock(&lanai->endtxlock);
1264 /*
1265 * We need to check if the "butt busy" bit is set before
1266 * updating the butt register. In theory this should
1267 * never happen because the ATM card is plenty fast at
1268 * updating the register. Still, we should make sure
1269 */
1270 for (i = 0; reg_read(lanai, Status_Reg) & STATUS_BUTTBUSY; i++) {
1271 if (unlikely(i > 50)) {
1272 printk(KERN_ERR DEV_LABEL "(itf %d): butt register "
1273 "always busy!\n", lanai->number);
1274 break;
1275 }
1276 udelay(5);
1277 }
1278 /*
1279 * Before we tall the card to start work we need to be sure 100% of
1280 * the info in the service buffer has been written before we tell
1281 * the card about it
1282 */
1283 wmb();
1284 reg_write(lanai, (ptr << 12) | lvcc->vci, Butt_Reg);
1285 spin_unlock(&lanai->endtxlock);
1286}
1287
1288/*
1289 * Add one AAL5 PDU to lvcc's transmit buffer. Caller garauntees there's
1290 * space available. "pdusize" is the number of bytes the PDU will take
1291 */
1292static void lanai_send_one_aal5(struct lanai_dev *lanai,
1293 struct lanai_vcc *lvcc, struct sk_buff *skb, int pdusize)
1294{
1295 int pad;
1296 APRINTK(pdusize == aal5_size(skb->len),
1297 "lanai_send_one_aal5: wrong size packet (%d != %d)\n",
1298 pdusize, aal5_size(skb->len));
1299 vcc_tx_add_aal5_descriptor(lvcc, 0, pdusize);
1300 pad = pdusize - skb->len - 8;
1301 APRINTK(pad >= 0, "pad is negative (%d)\n", pad);
1302 APRINTK(pad < 48, "pad is too big (%d)\n", pad);
1303 vcc_tx_memcpy(lvcc, skb->data, skb->len);
1304 vcc_tx_memzero(lvcc, pad);
1305 vcc_tx_add_aal5_trailer(lvcc, skb->len, 0, 0);
1306 lanai_endtx(lanai, lvcc);
1307 lanai_free_skb(lvcc->tx.atmvcc, skb);
1308 atomic_inc(&lvcc->tx.atmvcc->stats->tx);
1309}
1310
1311/* Try to fill the buffer - don't call unless there is backlog */
1312static void vcc_tx_unqueue_aal5(struct lanai_dev *lanai,
1313 struct lanai_vcc *lvcc, int endptr)
1314{
1315 int n;
1316 struct sk_buff *skb;
1317 int space = vcc_tx_space(lvcc, endptr);
1318 APRINTK(vcc_is_backlogged(lvcc),
1319 "vcc_tx_unqueue() called with empty backlog (vci=%d)\n",
1320 lvcc->vci);
1321 while (space >= 64) {
1322 skb = skb_dequeue(&lvcc->tx.backlog);
1323 if (skb == NULL)
1324 goto no_backlog;
1325 n = aal5_size(skb->len);
1326 if (n + 16 > space) {
1327 /* No room for this packet - put it back on queue */
1328 skb_queue_head(&lvcc->tx.backlog, skb);
1329 return;
1330 }
1331 lanai_send_one_aal5(lanai, lvcc, skb, n);
1332 space -= n + 16;
1333 }
1334 if (!vcc_is_backlogged(lvcc)) {
1335 no_backlog:
1336 __clear_bit(lvcc->vci, lanai->backlog_vccs);
1337 }
1338}
1339
1340/* Given an skb that we want to transmit either send it now or queue */
1341static void vcc_tx_aal5(struct lanai_dev *lanai, struct lanai_vcc *lvcc,
1342 struct sk_buff *skb)
1343{
1344 int space, n;
1345 if (vcc_is_backlogged(lvcc)) /* Already backlogged */
1346 goto queue_it;
1347 space = vcc_tx_space(lvcc,
1348 TXREADPTR_GET_PTR(cardvcc_read(lvcc, vcc_txreadptr)));
1349 n = aal5_size(skb->len);
1350 APRINTK(n + 16 >= 64, "vcc_tx_aal5: n too small (%d)\n", n);
1351 if (space < n + 16) { /* No space for this PDU */
1352 __set_bit(lvcc->vci, lanai->backlog_vccs);
1353 queue_it:
1354 skb_queue_tail(&lvcc->tx.backlog, skb);
1355 return;
1356 }
1357 lanai_send_one_aal5(lanai, lvcc, skb, n);
1358}
1359
1360static void vcc_tx_unqueue_aal0(struct lanai_dev *lanai,
1361 struct lanai_vcc *lvcc, int endptr)
1362{
1363 printk(KERN_INFO DEV_LABEL
1364 ": vcc_tx_unqueue_aal0: not implemented\n");
1365}
1366
1367static void vcc_tx_aal0(struct lanai_dev *lanai, struct lanai_vcc *lvcc,
1368 struct sk_buff *skb)
1369{
1370 printk(KERN_INFO DEV_LABEL ": vcc_tx_aal0: not implemented\n");
1371 /* Remember to increment lvcc->tx.atmvcc->stats->tx */
1372 lanai_free_skb(lvcc->tx.atmvcc, skb);
1373}
1374
1375/* -------------------- VCC RX BUFFER UTILITIES: */
1376
1377/* unlike the _tx_ cousins, this doesn't update ptr */
1378static inline void vcc_rx_memcpy(unsigned char *dest,
1379 const struct lanai_vcc *lvcc, int n)
1380{
1381 int m = ((const unsigned char *) lvcc->rx.buf.ptr) + n -
1382 ((const unsigned char *) (lvcc->rx.buf.end));
1383 if (m < 0)
1384 m = 0;
1385 memcpy(dest, lvcc->rx.buf.ptr, n - m);
1386 memcpy(dest + n - m, lvcc->rx.buf.start, m);
1387 /* Make sure that these copies don't get reordered */
1388 barrier();
1389}
1390
1391/* Receive AAL5 data on a VCC with a particular endptr */
1392static void vcc_rx_aal5(struct lanai_vcc *lvcc, int endptr)
1393{
1394 int size;
1395 struct sk_buff *skb;
Mitchell Blank Jrc22c28f2005-11-29 16:14:12 -08001396 const u32 *x;
1397 u32 *end = &lvcc->rx.buf.start[endptr * 4];
Linus Torvalds1da177e2005-04-16 15:20:36 -07001398 int n = ((unsigned long) end) - ((unsigned long) lvcc->rx.buf.ptr);
1399 if (n < 0)
1400 n += lanai_buf_size(&lvcc->rx.buf);
1401 APRINTK(n >= 0 && n < lanai_buf_size(&lvcc->rx.buf) && !(n & 15),
1402 "vcc_rx_aal5: n out of range (%d/%Zu)\n",
1403 n, lanai_buf_size(&lvcc->rx.buf));
1404 /* Recover the second-to-last word to get true pdu length */
1405 if ((x = &end[-2]) < lvcc->rx.buf.start)
1406 x = &lvcc->rx.buf.end[-2];
1407 /*
1408 * Before we actually read from the buffer, make sure the memory
1409 * changes have arrived
1410 */
1411 rmb();
1412 size = be32_to_cpup(x) & 0xffff;
1413 if (unlikely(n != aal5_size(size))) {
1414 /* Make sure size matches padding */
1415 printk(KERN_INFO DEV_LABEL "(itf %d): Got bad AAL5 length "
1416 "on vci=%d - size=%d n=%d\n",
1417 lvcc->rx.atmvcc->dev->number, lvcc->vci, size, n);
1418 lvcc->stats.x.aal5.rx_badlen++;
1419 goto out;
1420 }
1421 skb = atm_alloc_charge(lvcc->rx.atmvcc, size, GFP_ATOMIC);
1422 if (unlikely(skb == NULL)) {
1423 lvcc->stats.rx_nomem++;
1424 goto out;
1425 }
1426 skb_put(skb, size);
1427 vcc_rx_memcpy(skb->data, lvcc, size);
1428 ATM_SKB(skb)->vcc = lvcc->rx.atmvcc;
Patrick McHardya61bbcf2005-08-14 17:24:31 -07001429 __net_timestamp(skb);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001430 lvcc->rx.atmvcc->push(lvcc->rx.atmvcc, skb);
1431 atomic_inc(&lvcc->rx.atmvcc->stats->rx);
1432 out:
1433 lvcc->rx.buf.ptr = end;
1434 cardvcc_write(lvcc, endptr, vcc_rxreadptr);
1435}
1436
1437static void vcc_rx_aal0(struct lanai_dev *lanai)
1438{
1439 printk(KERN_INFO DEV_LABEL ": vcc_rx_aal0: not implemented\n");
1440 /* Remember to get read_lock(&vcc_sklist_lock) while looking up VC */
1441 /* Remember to increment lvcc->rx.atmvcc->stats->rx */
1442}
1443
1444/* -------------------- MANAGING HOST-BASED VCC TABLE: */
1445
1446/* Decide whether to use vmalloc or get_zeroed_page for VCC table */
1447#if (NUM_VCI * BITS_PER_LONG) <= PAGE_SIZE
1448#define VCCTABLE_GETFREEPAGE
1449#else
1450#include <linux/vmalloc.h>
1451#endif
1452
1453static int __devinit vcc_table_allocate(struct lanai_dev *lanai)
1454{
1455#ifdef VCCTABLE_GETFREEPAGE
1456 APRINTK((lanai->num_vci) * sizeof(struct lanai_vcc *) <= PAGE_SIZE,
1457 "vcc table > PAGE_SIZE!");
1458 lanai->vccs = (struct lanai_vcc **) get_zeroed_page(GFP_KERNEL);
1459 return (lanai->vccs == NULL) ? -ENOMEM : 0;
1460#else
1461 int bytes = (lanai->num_vci) * sizeof(struct lanai_vcc *);
1462 lanai->vccs = (struct lanai_vcc **) vmalloc(bytes);
1463 if (unlikely(lanai->vccs == NULL))
1464 return -ENOMEM;
1465 memset(lanai->vccs, 0, bytes);
1466 return 0;
1467#endif
1468}
1469
1470static inline void vcc_table_deallocate(const struct lanai_dev *lanai)
1471{
1472#ifdef VCCTABLE_GETFREEPAGE
1473 free_page((unsigned long) lanai->vccs);
1474#else
1475 vfree(lanai->vccs);
1476#endif
1477}
1478
1479/* Allocate a fresh lanai_vcc, with the appropriate things cleared */
1480static inline struct lanai_vcc *new_lanai_vcc(void)
1481{
1482 struct lanai_vcc *lvcc;
Om Narasimhan0c1cca12006-10-03 16:27:18 -07001483 lvcc = kzalloc(sizeof(*lvcc), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001484 if (likely(lvcc != NULL)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001485 skb_queue_head_init(&lvcc->tx.backlog);
1486#ifdef DEBUG
Linus Torvalds1da177e2005-04-16 15:20:36 -07001487 lvcc->vci = -1;
1488#endif
1489 }
1490 return lvcc;
1491}
1492
1493static int lanai_get_sized_buffer(struct lanai_dev *lanai,
1494 struct lanai_buffer *buf, int max_sdu, int multiplier,
1495 const char *name)
1496{
1497 int size;
1498 if (unlikely(max_sdu < 1))
1499 max_sdu = 1;
1500 max_sdu = aal5_size(max_sdu);
1501 size = (max_sdu + 16) * multiplier + 16;
1502 lanai_buf_allocate(buf, size, max_sdu + 32, lanai->pci);
1503 if (unlikely(buf->start == NULL))
1504 return -ENOMEM;
1505 if (unlikely(lanai_buf_size(buf) < size))
1506 printk(KERN_WARNING DEV_LABEL "(itf %d): wanted %d bytes "
1507 "for %s buffer, got only %Zu\n", lanai->number, size,
1508 name, lanai_buf_size(buf));
1509 DPRINTK("Allocated %Zu byte %s buffer\n", lanai_buf_size(buf), name);
1510 return 0;
1511}
1512
1513/* Setup a RX buffer for a currently unbound AAL5 vci */
1514static inline int lanai_setup_rx_vci_aal5(struct lanai_dev *lanai,
1515 struct lanai_vcc *lvcc, const struct atm_qos *qos)
1516{
1517 return lanai_get_sized_buffer(lanai, &lvcc->rx.buf,
1518 qos->rxtp.max_sdu, AAL5_RX_MULTIPLIER, "RX");
1519}
1520
1521/* Setup a TX buffer for a currently unbound AAL5 vci */
1522static int lanai_setup_tx_vci(struct lanai_dev *lanai, struct lanai_vcc *lvcc,
1523 const struct atm_qos *qos)
1524{
1525 int max_sdu, multiplier;
1526 if (qos->aal == ATM_AAL0) {
1527 lvcc->tx.unqueue = vcc_tx_unqueue_aal0;
1528 max_sdu = ATM_CELL_SIZE - 1;
1529 multiplier = AAL0_TX_MULTIPLIER;
1530 } else {
1531 lvcc->tx.unqueue = vcc_tx_unqueue_aal5;
1532 max_sdu = qos->txtp.max_sdu;
1533 multiplier = AAL5_TX_MULTIPLIER;
1534 }
1535 return lanai_get_sized_buffer(lanai, &lvcc->tx.buf, max_sdu,
1536 multiplier, "TX");
1537}
1538
1539static inline void host_vcc_bind(struct lanai_dev *lanai,
1540 struct lanai_vcc *lvcc, vci_t vci)
1541{
1542 if (lvcc->vbase != NULL)
1543 return; /* We already were bound in the other direction */
1544 DPRINTK("Binding vci %d\n", vci);
1545#ifdef USE_POWERDOWN
1546 if (lanai->nbound++ == 0) {
1547 DPRINTK("Coming out of powerdown\n");
1548 lanai->conf1 &= ~CONFIG1_POWERDOWN;
1549 conf1_write(lanai);
1550 conf2_write(lanai);
1551 }
1552#endif
1553 lvcc->vbase = cardvcc_addr(lanai, vci);
1554 lanai->vccs[lvcc->vci = vci] = lvcc;
1555}
1556
1557static inline void host_vcc_unbind(struct lanai_dev *lanai,
1558 struct lanai_vcc *lvcc)
1559{
1560 if (lvcc->vbase == NULL)
1561 return; /* This vcc was never bound */
1562 DPRINTK("Unbinding vci %d\n", lvcc->vci);
1563 lvcc->vbase = NULL;
1564 lanai->vccs[lvcc->vci] = NULL;
1565#ifdef USE_POWERDOWN
1566 if (--lanai->nbound == 0) {
1567 DPRINTK("Going into powerdown\n");
1568 lanai->conf1 |= CONFIG1_POWERDOWN;
1569 conf1_write(lanai);
1570 }
1571#endif
1572}
1573
1574/* -------------------- RESET CARD: */
1575
1576static void lanai_reset(struct lanai_dev *lanai)
1577{
1578 printk(KERN_CRIT DEV_LABEL "(itf %d): *NOT* reseting - not "
1579 "implemented\n", lanai->number);
1580 /* TODO */
1581 /* The following is just a hack until we write the real
1582 * resetter - at least ack whatever interrupt sent us
1583 * here
1584 */
1585 reg_write(lanai, INT_ALL, IntAck_Reg);
1586 lanai->stats.card_reset++;
1587}
1588
1589/* -------------------- SERVICE LIST UTILITIES: */
1590
1591/*
1592 * Allocate service buffer and tell card about it
1593 */
1594static int __devinit service_buffer_allocate(struct lanai_dev *lanai)
1595{
1596 lanai_buf_allocate(&lanai->service, SERVICE_ENTRIES * 4, 8,
1597 lanai->pci);
1598 if (unlikely(lanai->service.start == NULL))
1599 return -ENOMEM;
1600 DPRINTK("allocated service buffer at 0x%08lX, size %Zu(%d)\n",
1601 (unsigned long) lanai->service.start,
1602 lanai_buf_size(&lanai->service),
1603 lanai_buf_size_cardorder(&lanai->service));
1604 /* Clear ServWrite register to be safe */
1605 reg_write(lanai, 0, ServWrite_Reg);
1606 /* ServiceStuff register contains size and address of buffer */
1607 reg_write(lanai,
1608 SSTUFF_SET_SIZE(lanai_buf_size_cardorder(&lanai->service)) |
1609 SSTUFF_SET_ADDR(lanai->service.dmaaddr),
1610 ServiceStuff_Reg);
1611 return 0;
1612}
1613
1614static inline void service_buffer_deallocate(struct lanai_dev *lanai)
1615{
1616 lanai_buf_deallocate(&lanai->service, lanai->pci);
1617}
1618
1619/* Bitfields in service list */
1620#define SERVICE_TX (0x80000000) /* Was from transmission */
1621#define SERVICE_TRASH (0x40000000) /* RXed PDU was trashed */
1622#define SERVICE_CRCERR (0x20000000) /* RXed PDU had CRC error */
1623#define SERVICE_CI (0x10000000) /* RXed PDU had CI set */
1624#define SERVICE_CLP (0x08000000) /* RXed PDU had CLP set */
1625#define SERVICE_STREAM (0x04000000) /* RX Stream mode */
1626#define SERVICE_GET_VCI(x) (((x)>>16)&0x3FF)
1627#define SERVICE_GET_END(x) ((x)&0x1FFF)
1628
1629/* Handle one thing from the service list - returns true if it marked a
1630 * VCC ready for xmit
1631 */
1632static int handle_service(struct lanai_dev *lanai, u32 s)
1633{
1634 vci_t vci = SERVICE_GET_VCI(s);
1635 struct lanai_vcc *lvcc;
1636 read_lock(&vcc_sklist_lock);
1637 lvcc = lanai->vccs[vci];
1638 if (unlikely(lvcc == NULL)) {
1639 read_unlock(&vcc_sklist_lock);
1640 DPRINTK("(itf %d) got service entry 0x%X for nonexistent "
1641 "vcc %d\n", lanai->number, (unsigned int) s, vci);
1642 if (s & SERVICE_TX)
1643 lanai->stats.service_notx++;
1644 else
1645 lanai->stats.service_norx++;
1646 return 0;
1647 }
1648 if (s & SERVICE_TX) { /* segmentation interrupt */
1649 if (unlikely(lvcc->tx.atmvcc == NULL)) {
1650 read_unlock(&vcc_sklist_lock);
1651 DPRINTK("(itf %d) got service entry 0x%X for non-TX "
1652 "vcc %d\n", lanai->number, (unsigned int) s, vci);
1653 lanai->stats.service_notx++;
1654 return 0;
1655 }
1656 __set_bit(vci, lanai->transmit_ready);
1657 lvcc->tx.endptr = SERVICE_GET_END(s);
1658 read_unlock(&vcc_sklist_lock);
1659 return 1;
1660 }
1661 if (unlikely(lvcc->rx.atmvcc == NULL)) {
1662 read_unlock(&vcc_sklist_lock);
1663 DPRINTK("(itf %d) got service entry 0x%X for non-RX "
1664 "vcc %d\n", lanai->number, (unsigned int) s, vci);
1665 lanai->stats.service_norx++;
1666 return 0;
1667 }
1668 if (unlikely(lvcc->rx.atmvcc->qos.aal != ATM_AAL5)) {
1669 read_unlock(&vcc_sklist_lock);
1670 DPRINTK("(itf %d) got RX service entry 0x%X for non-AAL5 "
1671 "vcc %d\n", lanai->number, (unsigned int) s, vci);
1672 lanai->stats.service_rxnotaal5++;
1673 atomic_inc(&lvcc->rx.atmvcc->stats->rx_err);
1674 return 0;
1675 }
1676 if (likely(!(s & (SERVICE_TRASH | SERVICE_STREAM | SERVICE_CRCERR)))) {
1677 vcc_rx_aal5(lvcc, SERVICE_GET_END(s));
1678 read_unlock(&vcc_sklist_lock);
1679 return 0;
1680 }
1681 if (s & SERVICE_TRASH) {
1682 int bytes;
1683 read_unlock(&vcc_sklist_lock);
1684 DPRINTK("got trashed rx pdu on vci %d\n", vci);
1685 atomic_inc(&lvcc->rx.atmvcc->stats->rx_err);
1686 lvcc->stats.x.aal5.service_trash++;
1687 bytes = (SERVICE_GET_END(s) * 16) -
1688 (((unsigned long) lvcc->rx.buf.ptr) -
1689 ((unsigned long) lvcc->rx.buf.start)) + 47;
1690 if (bytes < 0)
1691 bytes += lanai_buf_size(&lvcc->rx.buf);
1692 lanai->stats.ovfl_trash += (bytes / 48);
1693 return 0;
1694 }
1695 if (s & SERVICE_STREAM) {
1696 read_unlock(&vcc_sklist_lock);
1697 atomic_inc(&lvcc->rx.atmvcc->stats->rx_err);
1698 lvcc->stats.x.aal5.service_stream++;
1699 printk(KERN_ERR DEV_LABEL "(itf %d): Got AAL5 stream "
1700 "PDU on VCI %d!\n", lanai->number, vci);
1701 lanai_reset(lanai);
1702 return 0;
1703 }
1704 DPRINTK("got rx crc error on vci %d\n", vci);
1705 atomic_inc(&lvcc->rx.atmvcc->stats->rx_err);
1706 lvcc->stats.x.aal5.service_rxcrc++;
1707 lvcc->rx.buf.ptr = &lvcc->rx.buf.start[SERVICE_GET_END(s) * 4];
1708 cardvcc_write(lvcc, SERVICE_GET_END(s), vcc_rxreadptr);
1709 read_unlock(&vcc_sklist_lock);
1710 return 0;
1711}
1712
1713/* Try transmitting on all VCIs that we marked ready to serve */
1714static void iter_transmit(struct lanai_dev *lanai, vci_t vci)
1715{
1716 struct lanai_vcc *lvcc = lanai->vccs[vci];
1717 if (vcc_is_backlogged(lvcc))
1718 lvcc->tx.unqueue(lanai, lvcc, lvcc->tx.endptr);
1719}
1720
1721/* Run service queue -- called from interrupt context or with
1722 * interrupts otherwise disabled and with the lanai->servicelock
1723 * lock held
1724 */
1725static void run_service(struct lanai_dev *lanai)
1726{
1727 int ntx = 0;
1728 u32 wreg = reg_read(lanai, ServWrite_Reg);
1729 const u32 *end = lanai->service.start + wreg;
1730 while (lanai->service.ptr != end) {
1731 ntx += handle_service(lanai,
1732 le32_to_cpup(lanai->service.ptr++));
1733 if (lanai->service.ptr >= lanai->service.end)
1734 lanai->service.ptr = lanai->service.start;
1735 }
1736 reg_write(lanai, wreg, ServRead_Reg);
1737 if (ntx != 0) {
1738 read_lock(&vcc_sklist_lock);
1739 vci_bitfield_iterate(lanai, lanai->transmit_ready,
1740 iter_transmit);
1741 bitmap_zero(lanai->transmit_ready, NUM_VCI);
1742 read_unlock(&vcc_sklist_lock);
1743 }
1744}
1745
1746/* -------------------- GATHER STATISTICS: */
1747
1748static void get_statistics(struct lanai_dev *lanai)
1749{
1750 u32 statreg = reg_read(lanai, Statistics_Reg);
1751 lanai->stats.atm_ovfl += STATS_GET_FIFO_OVFL(statreg);
1752 lanai->stats.hec_err += STATS_GET_HEC_ERR(statreg);
1753 lanai->stats.vci_trash += STATS_GET_BAD_VCI(statreg);
1754 lanai->stats.ovfl_trash += STATS_GET_BUF_OVFL(statreg);
1755}
1756
1757/* -------------------- POLLING TIMER: */
1758
1759#ifndef DEBUG_RW
1760/* Try to undequeue 1 backlogged vcc */
1761static void iter_dequeue(struct lanai_dev *lanai, vci_t vci)
1762{
1763 struct lanai_vcc *lvcc = lanai->vccs[vci];
1764 int endptr;
1765 if (lvcc == NULL || lvcc->tx.atmvcc == NULL ||
1766 !vcc_is_backlogged(lvcc)) {
1767 __clear_bit(vci, lanai->backlog_vccs);
1768 return;
1769 }
1770 endptr = TXREADPTR_GET_PTR(cardvcc_read(lvcc, vcc_txreadptr));
1771 lvcc->tx.unqueue(lanai, lvcc, endptr);
1772}
1773#endif /* !DEBUG_RW */
1774
1775static void lanai_timed_poll(unsigned long arg)
1776{
1777 struct lanai_dev *lanai = (struct lanai_dev *) arg;
1778#ifndef DEBUG_RW
1779 unsigned long flags;
1780#ifdef USE_POWERDOWN
1781 if (lanai->conf1 & CONFIG1_POWERDOWN)
1782 return;
1783#endif /* USE_POWERDOWN */
1784 local_irq_save(flags);
1785 /* If we can grab the spinlock, check if any services need to be run */
1786 if (spin_trylock(&lanai->servicelock)) {
1787 run_service(lanai);
1788 spin_unlock(&lanai->servicelock);
1789 }
1790 /* ...and see if any backlogged VCs can make progress */
1791 /* unfortunately linux has no read_trylock() currently */
1792 read_lock(&vcc_sklist_lock);
1793 vci_bitfield_iterate(lanai, lanai->backlog_vccs, iter_dequeue);
1794 read_unlock(&vcc_sklist_lock);
1795 local_irq_restore(flags);
1796
1797 get_statistics(lanai);
1798#endif /* !DEBUG_RW */
1799 mod_timer(&lanai->timer, jiffies + LANAI_POLL_PERIOD);
1800}
1801
1802static inline void lanai_timed_poll_start(struct lanai_dev *lanai)
1803{
1804 init_timer(&lanai->timer);
1805 lanai->timer.expires = jiffies + LANAI_POLL_PERIOD;
1806 lanai->timer.data = (unsigned long) lanai;
1807 lanai->timer.function = lanai_timed_poll;
1808 add_timer(&lanai->timer);
1809}
1810
1811static inline void lanai_timed_poll_stop(struct lanai_dev *lanai)
1812{
1813 del_timer_sync(&lanai->timer);
1814}
1815
1816/* -------------------- INTERRUPT SERVICE: */
1817
1818static inline void lanai_int_1(struct lanai_dev *lanai, u32 reason)
1819{
1820 u32 ack = 0;
1821 if (reason & INT_SERVICE) {
1822 ack = INT_SERVICE;
1823 spin_lock(&lanai->servicelock);
1824 run_service(lanai);
1825 spin_unlock(&lanai->servicelock);
1826 }
1827 if (reason & (INT_AAL0_STR | INT_AAL0)) {
1828 ack |= reason & (INT_AAL0_STR | INT_AAL0);
1829 vcc_rx_aal0(lanai);
1830 }
1831 /* The rest of the interrupts are pretty rare */
1832 if (ack == reason)
1833 goto done;
1834 if (reason & INT_STATS) {
1835 reason &= ~INT_STATS; /* No need to ack */
1836 get_statistics(lanai);
1837 }
1838 if (reason & INT_STATUS) {
1839 ack |= reason & INT_STATUS;
1840 lanai_check_status(lanai);
1841 }
1842 if (unlikely(reason & INT_DMASHUT)) {
1843 printk(KERN_ERR DEV_LABEL "(itf %d): driver error - DMA "
1844 "shutdown, reason=0x%08X, address=0x%08X\n",
1845 lanai->number, (unsigned int) (reason & INT_DMASHUT),
1846 (unsigned int) reg_read(lanai, DMA_Addr_Reg));
1847 if (reason & INT_TABORTBM) {
1848 lanai_reset(lanai);
1849 return;
1850 }
1851 ack |= (reason & INT_DMASHUT);
1852 printk(KERN_ERR DEV_LABEL "(itf %d): re-enabling DMA\n",
1853 lanai->number);
1854 conf1_write(lanai);
1855 lanai->stats.dma_reenable++;
1856 pcistatus_check(lanai, 0);
1857 }
1858 if (unlikely(reason & INT_TABORTSENT)) {
1859 ack |= (reason & INT_TABORTSENT);
1860 printk(KERN_ERR DEV_LABEL "(itf %d): sent PCI target abort\n",
1861 lanai->number);
1862 pcistatus_check(lanai, 0);
1863 }
1864 if (unlikely(reason & INT_SEGSHUT)) {
1865 printk(KERN_ERR DEV_LABEL "(itf %d): driver error - "
1866 "segmentation shutdown, reason=0x%08X\n", lanai->number,
1867 (unsigned int) (reason & INT_SEGSHUT));
1868 lanai_reset(lanai);
1869 return;
1870 }
1871 if (unlikely(reason & (INT_PING | INT_WAKE))) {
1872 printk(KERN_ERR DEV_LABEL "(itf %d): driver error - "
1873 "unexpected interrupt 0x%08X, resetting\n",
1874 lanai->number,
1875 (unsigned int) (reason & (INT_PING | INT_WAKE)));
1876 lanai_reset(lanai);
1877 return;
1878 }
1879#ifdef DEBUG
1880 if (unlikely(ack != reason)) {
1881 DPRINTK("unacked ints: 0x%08X\n",
1882 (unsigned int) (reason & ~ack));
1883 ack = reason;
1884 }
1885#endif
1886 done:
1887 if (ack != 0)
1888 reg_write(lanai, ack, IntAck_Reg);
1889}
1890
David Howells7d12e782006-10-05 14:55:46 +01001891static irqreturn_t lanai_int(int irq, void *devid)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001892{
Jeff Garzikc7bec5a2006-10-06 15:00:58 -04001893 struct lanai_dev *lanai = devid;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001894 u32 reason;
1895
Linus Torvalds1da177e2005-04-16 15:20:36 -07001896#ifdef USE_POWERDOWN
1897 /*
1898 * If we're powered down we shouldn't be generating any interrupts -
1899 * so assume that this is a shared interrupt line and it's for someone
1900 * else
1901 */
1902 if (unlikely(lanai->conf1 & CONFIG1_POWERDOWN))
1903 return IRQ_NONE;
1904#endif
1905
1906 reason = intr_pending(lanai);
1907 if (reason == 0)
1908 return IRQ_NONE; /* Must be for someone else */
1909
1910 do {
1911 if (unlikely(reason == 0xFFFFFFFF))
1912 break; /* Maybe we've been unplugged? */
1913 lanai_int_1(lanai, reason);
1914 reason = intr_pending(lanai);
1915 } while (reason != 0);
1916
1917 return IRQ_HANDLED;
1918}
1919
1920/* TODO - it would be nice if we could use the "delayed interrupt" system
1921 * to some advantage
1922 */
1923
1924/* -------------------- CHECK BOARD ID/REV: */
1925
1926/*
1927 * The board id and revision are stored both in the reset register and
1928 * in the PCI configuration space - the documentation says to check
1929 * each of them. If revp!=NULL we store the revision there
1930 */
1931static int check_board_id_and_rev(const char *name, u32 val, int *revp)
1932{
1933 DPRINTK("%s says board_id=%d, board_rev=%d\n", name,
1934 (int) RESET_GET_BOARD_ID(val),
1935 (int) RESET_GET_BOARD_REV(val));
1936 if (RESET_GET_BOARD_ID(val) != BOARD_ID_LANAI256) {
1937 printk(KERN_ERR DEV_LABEL ": Found %s board-id %d -- not a "
1938 "Lanai 25.6\n", name, (int) RESET_GET_BOARD_ID(val));
1939 return -ENODEV;
1940 }
1941 if (revp != NULL)
1942 *revp = RESET_GET_BOARD_REV(val);
1943 return 0;
1944}
1945
1946/* -------------------- PCI INITIALIZATION/SHUTDOWN: */
1947
1948static int __devinit lanai_pci_start(struct lanai_dev *lanai)
1949{
1950 struct pci_dev *pci = lanai->pci;
1951 int result;
1952 u16 w;
1953
1954 if (pci_enable_device(pci) != 0) {
1955 printk(KERN_ERR DEV_LABEL "(itf %d): can't enable "
1956 "PCI device", lanai->number);
1957 return -ENXIO;
1958 }
1959 pci_set_master(pci);
1960 if (pci_set_dma_mask(pci, DMA_32BIT_MASK) != 0) {
1961 printk(KERN_WARNING DEV_LABEL
1962 "(itf %d): No suitable DMA available.\n", lanai->number);
1963 return -EBUSY;
1964 }
Matthias Gehre910638a2006-03-28 01:56:48 -08001965 if (pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK) != 0) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001966 printk(KERN_WARNING DEV_LABEL
1967 "(itf %d): No suitable DMA available.\n", lanai->number);
1968 return -EBUSY;
1969 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001970 result = pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &w);
1971 if (result != PCIBIOS_SUCCESSFUL) {
1972 printk(KERN_ERR DEV_LABEL "(itf %d): can't read "
1973 "PCI_SUBSYSTEM_ID: %d\n", lanai->number, result);
1974 return -EINVAL;
1975 }
1976 result = check_board_id_and_rev("PCI", w, NULL);
1977 if (result != 0)
1978 return result;
1979 /* Set latency timer to zero as per lanai docs */
1980 result = pci_write_config_byte(pci, PCI_LATENCY_TIMER, 0);
1981 if (result != PCIBIOS_SUCCESSFUL) {
1982 printk(KERN_ERR DEV_LABEL "(itf %d): can't write "
1983 "PCI_LATENCY_TIMER: %d\n", lanai->number, result);
1984 return -EINVAL;
1985 }
1986 pcistatus_check(lanai, 1);
1987 pcistatus_check(lanai, 0);
1988 return 0;
1989}
1990
1991/* -------------------- VPI/VCI ALLOCATION: */
1992
1993/*
1994 * We _can_ use VCI==0 for normal traffic, but only for UBR (or we'll
1995 * get a CBRZERO interrupt), and we can use it only if noone is receiving
1996 * AAL0 traffic (since they will use the same queue) - according to the
1997 * docs we shouldn't even use it for AAL0 traffic
1998 */
1999static inline int vci0_is_ok(struct lanai_dev *lanai,
2000 const struct atm_qos *qos)
2001{
2002 if (qos->txtp.traffic_class == ATM_CBR || qos->aal == ATM_AAL0)
2003 return 0;
2004 if (qos->rxtp.traffic_class != ATM_NONE) {
2005 if (lanai->naal0 != 0)
2006 return 0;
2007 lanai->conf2 |= CONFIG2_VCI0_NORMAL;
2008 conf2_write_if_powerup(lanai);
2009 }
2010 return 1;
2011}
2012
2013/* return true if vci is currently unused, or if requested qos is
2014 * compatible
2015 */
2016static int vci_is_ok(struct lanai_dev *lanai, vci_t vci,
2017 const struct atm_vcc *atmvcc)
2018{
2019 const struct atm_qos *qos = &atmvcc->qos;
2020 const struct lanai_vcc *lvcc = lanai->vccs[vci];
2021 if (vci == 0 && !vci0_is_ok(lanai, qos))
2022 return 0;
2023 if (unlikely(lvcc != NULL)) {
2024 if (qos->rxtp.traffic_class != ATM_NONE &&
2025 lvcc->rx.atmvcc != NULL && lvcc->rx.atmvcc != atmvcc)
2026 return 0;
2027 if (qos->txtp.traffic_class != ATM_NONE &&
2028 lvcc->tx.atmvcc != NULL && lvcc->tx.atmvcc != atmvcc)
2029 return 0;
2030 if (qos->txtp.traffic_class == ATM_CBR &&
2031 lanai->cbrvcc != NULL && lanai->cbrvcc != atmvcc)
2032 return 0;
2033 }
2034 if (qos->aal == ATM_AAL0 && lanai->naal0 == 0 &&
2035 qos->rxtp.traffic_class != ATM_NONE) {
2036 const struct lanai_vcc *vci0 = lanai->vccs[0];
2037 if (vci0 != NULL && vci0->rx.atmvcc != NULL)
2038 return 0;
2039 lanai->conf2 &= ~CONFIG2_VCI0_NORMAL;
2040 conf2_write_if_powerup(lanai);
2041 }
2042 return 1;
2043}
2044
2045static int lanai_normalize_ci(struct lanai_dev *lanai,
2046 const struct atm_vcc *atmvcc, short *vpip, vci_t *vcip)
2047{
2048 switch (*vpip) {
2049 case ATM_VPI_ANY:
2050 *vpip = 0;
2051 /* FALLTHROUGH */
2052 case 0:
2053 break;
2054 default:
2055 return -EADDRINUSE;
2056 }
2057 switch (*vcip) {
2058 case ATM_VCI_ANY:
2059 for (*vcip = ATM_NOT_RSV_VCI; *vcip < lanai->num_vci;
2060 (*vcip)++)
2061 if (vci_is_ok(lanai, *vcip, atmvcc))
2062 return 0;
2063 return -EADDRINUSE;
2064 default:
2065 if (*vcip >= lanai->num_vci || *vcip < 0 ||
2066 !vci_is_ok(lanai, *vcip, atmvcc))
2067 return -EADDRINUSE;
2068 }
2069 return 0;
2070}
2071
2072/* -------------------- MANAGE CBR: */
2073
2074/*
2075 * CBR ICG is stored as a fixed-point number with 4 fractional bits.
2076 * Note that storing a number greater than 2046.0 will result in
2077 * incorrect shaping
2078 */
2079#define CBRICG_FRAC_BITS (4)
2080#define CBRICG_MAX (2046 << CBRICG_FRAC_BITS)
2081
2082/*
2083 * ICG is related to PCR with the formula PCR = MAXPCR / (ICG + 1)
2084 * where MAXPCR is (according to the docs) 25600000/(54*8),
2085 * which is equal to (3125<<9)/27.
2086 *
2087 * Solving for ICG, we get:
2088 * ICG = MAXPCR/PCR - 1
2089 * ICG = (3125<<9)/(27*PCR) - 1
2090 * ICG = ((3125<<9) - (27*PCR)) / (27*PCR)
2091 *
2092 * The end result is supposed to be a fixed-point number with FRAC_BITS
2093 * bits of a fractional part, so we keep everything in the numerator
2094 * shifted by that much as we compute
2095 *
2096 */
Mitchell Blank Jrc22c28f2005-11-29 16:14:12 -08002097static int pcr_to_cbricg(const struct atm_qos *qos)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002098{
2099 int rounddown = 0; /* 1 = Round PCR down, i.e. round ICG _up_ */
2100 int x, icg, pcr = atm_pcr_goal(&qos->txtp);
2101 if (pcr == 0) /* Use maximum bandwidth */
2102 return 0;
2103 if (pcr < 0) {
2104 rounddown = 1;
2105 pcr = -pcr;
2106 }
2107 x = pcr * 27;
2108 icg = (3125 << (9 + CBRICG_FRAC_BITS)) - (x << CBRICG_FRAC_BITS);
2109 if (rounddown)
2110 icg += x - 1;
2111 icg /= x;
2112 if (icg > CBRICG_MAX)
2113 icg = CBRICG_MAX;
2114 DPRINTK("pcr_to_cbricg: pcr=%d rounddown=%c icg=%d\n",
2115 pcr, rounddown ? 'Y' : 'N', icg);
2116 return icg;
2117}
2118
2119static inline void lanai_cbr_setup(struct lanai_dev *lanai)
2120{
2121 reg_write(lanai, pcr_to_cbricg(&lanai->cbrvcc->qos), CBR_ICG_Reg);
2122 reg_write(lanai, lanai->cbrvcc->vci, CBR_PTR_Reg);
2123 lanai->conf2 |= CONFIG2_CBR_ENABLE;
2124 conf2_write(lanai);
2125}
2126
2127static inline void lanai_cbr_shutdown(struct lanai_dev *lanai)
2128{
2129 lanai->conf2 &= ~CONFIG2_CBR_ENABLE;
2130 conf2_write(lanai);
2131}
2132
2133/* -------------------- OPERATIONS: */
2134
2135/* setup a newly detected device */
2136static int __devinit lanai_dev_open(struct atm_dev *atmdev)
2137{
2138 struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data;
2139 unsigned long raw_base;
2140 int result;
2141
2142 DPRINTK("In lanai_dev_open()\n");
2143 /* Basic device fields */
2144 lanai->number = atmdev->number;
2145 lanai->num_vci = NUM_VCI;
2146 bitmap_zero(lanai->backlog_vccs, NUM_VCI);
2147 bitmap_zero(lanai->transmit_ready, NUM_VCI);
2148 lanai->naal0 = 0;
2149#ifdef USE_POWERDOWN
2150 lanai->nbound = 0;
2151#endif
2152 lanai->cbrvcc = NULL;
2153 memset(&lanai->stats, 0, sizeof lanai->stats);
2154 spin_lock_init(&lanai->endtxlock);
2155 spin_lock_init(&lanai->servicelock);
2156 atmdev->ci_range.vpi_bits = 0;
2157 atmdev->ci_range.vci_bits = 0;
2158 while (1 << atmdev->ci_range.vci_bits < lanai->num_vci)
2159 atmdev->ci_range.vci_bits++;
2160 atmdev->link_rate = ATM_25_PCR;
2161
2162 /* 3.2: PCI initialization */
2163 if ((result = lanai_pci_start(lanai)) != 0)
2164 goto error;
2165 raw_base = lanai->pci->resource[0].start;
2166 lanai->base = (bus_addr_t) ioremap(raw_base, LANAI_MAPPING_SIZE);
2167 if (lanai->base == NULL) {
2168 printk(KERN_ERR DEV_LABEL ": couldn't remap I/O space\n");
2169 goto error_pci;
2170 }
2171 /* 3.3: Reset lanai and PHY */
2172 reset_board(lanai);
2173 lanai->conf1 = reg_read(lanai, Config1_Reg);
2174 lanai->conf1 &= ~(CONFIG1_GPOUT1 | CONFIG1_POWERDOWN |
2175 CONFIG1_MASK_LEDMODE);
2176 lanai->conf1 |= CONFIG1_SET_LEDMODE(LEDMODE_NOT_SOOL);
2177 reg_write(lanai, lanai->conf1 | CONFIG1_GPOUT1, Config1_Reg);
2178 udelay(1000);
2179 conf1_write(lanai);
2180
2181 /*
2182 * 3.4: Turn on endian mode for big-endian hardware
2183 * We don't actually want to do this - the actual bit fields
2184 * in the endian register are not documented anywhere.
2185 * Instead we do the bit-flipping ourselves on big-endian
2186 * hardware.
2187 *
2188 * 3.5: get the board ID/rev by reading the reset register
2189 */
2190 result = check_board_id_and_rev("register",
2191 reg_read(lanai, Reset_Reg), &lanai->board_rev);
2192 if (result != 0)
2193 goto error_unmap;
2194
2195 /* 3.6: read EEPROM */
2196 if ((result = eeprom_read(lanai)) != 0)
2197 goto error_unmap;
2198 if ((result = eeprom_validate(lanai)) != 0)
2199 goto error_unmap;
2200
2201 /* 3.7: re-reset PHY, do loopback tests, setup PHY */
2202 reg_write(lanai, lanai->conf1 | CONFIG1_GPOUT1, Config1_Reg);
2203 udelay(1000);
2204 conf1_write(lanai);
2205 /* TODO - loopback tests */
2206 lanai->conf1 |= (CONFIG1_GPOUT2 | CONFIG1_GPOUT3 | CONFIG1_DMA_ENABLE);
2207 conf1_write(lanai);
2208
2209 /* 3.8/3.9: test and initialize card SRAM */
2210 if ((result = sram_test_and_clear(lanai)) != 0)
2211 goto error_unmap;
2212
2213 /* 3.10: initialize lanai registers */
2214 lanai->conf1 |= CONFIG1_DMA_ENABLE;
2215 conf1_write(lanai);
2216 if ((result = service_buffer_allocate(lanai)) != 0)
2217 goto error_unmap;
2218 if ((result = vcc_table_allocate(lanai)) != 0)
2219 goto error_service;
2220 lanai->conf2 = (lanai->num_vci >= 512 ? CONFIG2_HOWMANY : 0) |
2221 CONFIG2_HEC_DROP | /* ??? */ CONFIG2_PTI7_MODE;
2222 conf2_write(lanai);
2223 reg_write(lanai, TX_FIFO_DEPTH, TxDepth_Reg);
2224 reg_write(lanai, 0, CBR_ICG_Reg); /* CBR defaults to no limit */
Thomas Gleixnerdace1452006-07-01 19:29:38 -07002225 if ((result = request_irq(lanai->pci->irq, lanai_int, IRQF_SHARED,
Linus Torvalds1da177e2005-04-16 15:20:36 -07002226 DEV_LABEL, lanai)) != 0) {
2227 printk(KERN_ERR DEV_LABEL ": can't allocate interrupt\n");
2228 goto error_vcctable;
2229 }
2230 mb(); /* Make sure that all that made it */
2231 intr_enable(lanai, INT_ALL & ~(INT_PING | INT_WAKE));
2232 /* 3.11: initialize loop mode (i.e. turn looping off) */
2233 lanai->conf1 = (lanai->conf1 & ~CONFIG1_MASK_LOOPMODE) |
2234 CONFIG1_SET_LOOPMODE(LOOPMODE_NORMAL) |
2235 CONFIG1_GPOUT2 | CONFIG1_GPOUT3;
2236 conf1_write(lanai);
2237 lanai->status = reg_read(lanai, Status_Reg);
2238 /* We're now done initializing this card */
2239#ifdef USE_POWERDOWN
2240 lanai->conf1 |= CONFIG1_POWERDOWN;
2241 conf1_write(lanai);
2242#endif
2243 memcpy(atmdev->esi, eeprom_mac(lanai), ESI_LEN);
2244 lanai_timed_poll_start(lanai);
2245 printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d, base=0x%lx, irq=%u "
2246 "(%02X-%02X-%02X-%02X-%02X-%02X)\n", lanai->number,
Auke Kok44c10132007-06-08 15:46:36 -07002247 (int) lanai->pci->revision, (unsigned long) lanai->base,
Linus Torvalds1da177e2005-04-16 15:20:36 -07002248 lanai->pci->irq,
2249 atmdev->esi[0], atmdev->esi[1], atmdev->esi[2],
2250 atmdev->esi[3], atmdev->esi[4], atmdev->esi[5]);
2251 printk(KERN_NOTICE DEV_LABEL "(itf %d): LANAI%s, serialno=%u(0x%X), "
2252 "board_rev=%d\n", lanai->number,
2253 lanai->type==lanai2 ? "2" : "HB", (unsigned int) lanai->serialno,
2254 (unsigned int) lanai->serialno, lanai->board_rev);
2255 return 0;
2256
2257 error_vcctable:
2258 vcc_table_deallocate(lanai);
2259 error_service:
2260 service_buffer_deallocate(lanai);
2261 error_unmap:
2262 reset_board(lanai);
2263#ifdef USE_POWERDOWN
2264 lanai->conf1 = reg_read(lanai, Config1_Reg) | CONFIG1_POWERDOWN;
2265 conf1_write(lanai);
2266#endif
2267 iounmap(lanai->base);
2268 error_pci:
2269 pci_disable_device(lanai->pci);
2270 error:
2271 return result;
2272}
2273
2274/* called when device is being shutdown, and all vcc's are gone - higher
2275 * levels will deallocate the atm device for us
2276 */
2277static void lanai_dev_close(struct atm_dev *atmdev)
2278{
2279 struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data;
2280 printk(KERN_INFO DEV_LABEL "(itf %d): shutting down interface\n",
2281 lanai->number);
2282 lanai_timed_poll_stop(lanai);
2283#ifdef USE_POWERDOWN
2284 lanai->conf1 = reg_read(lanai, Config1_Reg) & ~CONFIG1_POWERDOWN;
2285 conf1_write(lanai);
2286#endif
2287 intr_disable(lanai, INT_ALL);
2288 free_irq(lanai->pci->irq, lanai);
2289 reset_board(lanai);
2290#ifdef USE_POWERDOWN
2291 lanai->conf1 |= CONFIG1_POWERDOWN;
2292 conf1_write(lanai);
2293#endif
2294 pci_disable_device(lanai->pci);
2295 vcc_table_deallocate(lanai);
2296 service_buffer_deallocate(lanai);
2297 iounmap(lanai->base);
2298 kfree(lanai);
2299}
2300
2301/* close a vcc */
2302static void lanai_close(struct atm_vcc *atmvcc)
2303{
2304 struct lanai_vcc *lvcc = (struct lanai_vcc *) atmvcc->dev_data;
2305 struct lanai_dev *lanai = (struct lanai_dev *) atmvcc->dev->dev_data;
2306 if (lvcc == NULL)
2307 return;
2308 clear_bit(ATM_VF_READY, &atmvcc->flags);
2309 clear_bit(ATM_VF_PARTIAL, &atmvcc->flags);
2310 if (lvcc->rx.atmvcc == atmvcc) {
2311 lanai_shutdown_rx_vci(lvcc);
2312 if (atmvcc->qos.aal == ATM_AAL0) {
2313 if (--lanai->naal0 <= 0)
2314 aal0_buffer_free(lanai);
2315 } else
2316 lanai_buf_deallocate(&lvcc->rx.buf, lanai->pci);
2317 lvcc->rx.atmvcc = NULL;
2318 }
2319 if (lvcc->tx.atmvcc == atmvcc) {
2320 if (atmvcc == lanai->cbrvcc) {
2321 if (lvcc->vbase != NULL)
2322 lanai_cbr_shutdown(lanai);
2323 lanai->cbrvcc = NULL;
2324 }
2325 lanai_shutdown_tx_vci(lanai, lvcc);
2326 lanai_buf_deallocate(&lvcc->tx.buf, lanai->pci);
2327 lvcc->tx.atmvcc = NULL;
2328 }
2329 if (--lvcc->nref == 0) {
2330 host_vcc_unbind(lanai, lvcc);
2331 kfree(lvcc);
2332 }
2333 atmvcc->dev_data = NULL;
2334 clear_bit(ATM_VF_ADDR, &atmvcc->flags);
2335}
2336
2337/* open a vcc on the card to vpi/vci */
2338static int lanai_open(struct atm_vcc *atmvcc)
2339{
2340 struct lanai_dev *lanai;
2341 struct lanai_vcc *lvcc;
2342 int result = 0;
2343 int vci = atmvcc->vci;
2344 short vpi = atmvcc->vpi;
2345 /* we don't support partial open - it's not really useful anyway */
2346 if ((test_bit(ATM_VF_PARTIAL, &atmvcc->flags)) ||
2347 (vpi == ATM_VPI_UNSPEC) || (vci == ATM_VCI_UNSPEC))
2348 return -EINVAL;
2349 lanai = (struct lanai_dev *) atmvcc->dev->dev_data;
2350 result = lanai_normalize_ci(lanai, atmvcc, &vpi, &vci);
2351 if (unlikely(result != 0))
2352 goto out;
2353 set_bit(ATM_VF_ADDR, &atmvcc->flags);
2354 if (atmvcc->qos.aal != ATM_AAL0 && atmvcc->qos.aal != ATM_AAL5)
2355 return -EINVAL;
2356 DPRINTK(DEV_LABEL "(itf %d): open %d.%d\n", lanai->number,
2357 (int) vpi, vci);
2358 lvcc = lanai->vccs[vci];
2359 if (lvcc == NULL) {
2360 lvcc = new_lanai_vcc();
2361 if (unlikely(lvcc == NULL))
2362 return -ENOMEM;
2363 atmvcc->dev_data = lvcc;
2364 }
2365 lvcc->nref++;
2366 if (atmvcc->qos.rxtp.traffic_class != ATM_NONE) {
2367 APRINTK(lvcc->rx.atmvcc == NULL, "rx.atmvcc!=NULL, vci=%d\n",
2368 vci);
2369 if (atmvcc->qos.aal == ATM_AAL0) {
2370 if (lanai->naal0 == 0)
2371 result = aal0_buffer_allocate(lanai);
2372 } else
2373 result = lanai_setup_rx_vci_aal5(
2374 lanai, lvcc, &atmvcc->qos);
2375 if (unlikely(result != 0))
2376 goto out_free;
2377 lvcc->rx.atmvcc = atmvcc;
2378 lvcc->stats.rx_nomem = 0;
2379 lvcc->stats.x.aal5.rx_badlen = 0;
2380 lvcc->stats.x.aal5.service_trash = 0;
2381 lvcc->stats.x.aal5.service_stream = 0;
2382 lvcc->stats.x.aal5.service_rxcrc = 0;
2383 if (atmvcc->qos.aal == ATM_AAL0)
2384 lanai->naal0++;
2385 }
2386 if (atmvcc->qos.txtp.traffic_class != ATM_NONE) {
2387 APRINTK(lvcc->tx.atmvcc == NULL, "tx.atmvcc!=NULL, vci=%d\n",
2388 vci);
2389 result = lanai_setup_tx_vci(lanai, lvcc, &atmvcc->qos);
2390 if (unlikely(result != 0))
2391 goto out_free;
2392 lvcc->tx.atmvcc = atmvcc;
2393 if (atmvcc->qos.txtp.traffic_class == ATM_CBR) {
2394 APRINTK(lanai->cbrvcc == NULL,
2395 "cbrvcc!=NULL, vci=%d\n", vci);
2396 lanai->cbrvcc = atmvcc;
2397 }
2398 }
2399 host_vcc_bind(lanai, lvcc, vci);
2400 /*
2401 * Make sure everything made it to RAM before we tell the card about
2402 * the VCC
2403 */
2404 wmb();
2405 if (atmvcc == lvcc->rx.atmvcc)
2406 host_vcc_start_rx(lvcc);
2407 if (atmvcc == lvcc->tx.atmvcc) {
2408 host_vcc_start_tx(lvcc);
2409 if (lanai->cbrvcc == atmvcc)
2410 lanai_cbr_setup(lanai);
2411 }
2412 set_bit(ATM_VF_READY, &atmvcc->flags);
2413 return 0;
2414 out_free:
2415 lanai_close(atmvcc);
2416 out:
2417 return result;
2418}
2419
Linus Torvalds1da177e2005-04-16 15:20:36 -07002420static int lanai_send(struct atm_vcc *atmvcc, struct sk_buff *skb)
2421{
2422 struct lanai_vcc *lvcc = (struct lanai_vcc *) atmvcc->dev_data;
2423 struct lanai_dev *lanai = (struct lanai_dev *) atmvcc->dev->dev_data;
2424 unsigned long flags;
2425 if (unlikely(lvcc == NULL || lvcc->vbase == NULL ||
2426 lvcc->tx.atmvcc != atmvcc))
2427 goto einval;
2428#ifdef DEBUG
2429 if (unlikely(skb == NULL)) {
2430 DPRINTK("lanai_send: skb==NULL for vci=%d\n", atmvcc->vci);
2431 goto einval;
2432 }
2433 if (unlikely(lanai == NULL)) {
2434 DPRINTK("lanai_send: lanai==NULL for vci=%d\n", atmvcc->vci);
2435 goto einval;
2436 }
2437#endif
2438 ATM_SKB(skb)->vcc = atmvcc;
2439 switch (atmvcc->qos.aal) {
2440 case ATM_AAL5:
2441 read_lock_irqsave(&vcc_sklist_lock, flags);
2442 vcc_tx_aal5(lanai, lvcc, skb);
2443 read_unlock_irqrestore(&vcc_sklist_lock, flags);
2444 return 0;
2445 case ATM_AAL0:
2446 if (unlikely(skb->len != ATM_CELL_SIZE-1))
2447 goto einval;
2448 /* NOTE - this next line is technically invalid - we haven't unshared skb */
2449 cpu_to_be32s((u32 *) skb->data);
2450 read_lock_irqsave(&vcc_sklist_lock, flags);
2451 vcc_tx_aal0(lanai, lvcc, skb);
2452 read_unlock_irqrestore(&vcc_sklist_lock, flags);
2453 return 0;
2454 }
2455 DPRINTK("lanai_send: bad aal=%d on vci=%d\n", (int) atmvcc->qos.aal,
2456 atmvcc->vci);
2457 einval:
2458 lanai_free_skb(atmvcc, skb);
2459 return -EINVAL;
2460}
2461
2462static int lanai_change_qos(struct atm_vcc *atmvcc,
2463 /*const*/ struct atm_qos *qos, int flags)
2464{
2465 return -EBUSY; /* TODO: need to write this */
2466}
2467
2468#ifndef CONFIG_PROC_FS
2469#define lanai_proc_read NULL
2470#else
2471static int lanai_proc_read(struct atm_dev *atmdev, loff_t *pos, char *page)
2472{
2473 struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data;
2474 loff_t left = *pos;
2475 struct lanai_vcc *lvcc;
2476 if (left-- == 0)
2477 return sprintf(page, DEV_LABEL "(itf %d): chip=LANAI%s, "
2478 "serial=%u, magic=0x%08X, num_vci=%d\n",
2479 atmdev->number, lanai->type==lanai2 ? "2" : "HB",
2480 (unsigned int) lanai->serialno,
2481 (unsigned int) lanai->magicno, lanai->num_vci);
2482 if (left-- == 0)
2483 return sprintf(page, "revision: board=%d, pci_if=%d\n",
Auke Kok44c10132007-06-08 15:46:36 -07002484 lanai->board_rev, (int) lanai->pci->revision);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002485 if (left-- == 0)
2486 return sprintf(page, "EEPROM ESI: "
2487 "%02X:%02X:%02X:%02X:%02X:%02X\n",
2488 lanai->eeprom[EEPROM_MAC + 0],
2489 lanai->eeprom[EEPROM_MAC + 1],
2490 lanai->eeprom[EEPROM_MAC + 2],
2491 lanai->eeprom[EEPROM_MAC + 3],
2492 lanai->eeprom[EEPROM_MAC + 4],
2493 lanai->eeprom[EEPROM_MAC + 5]);
2494 if (left-- == 0)
2495 return sprintf(page, "status: SOOL=%d, LOCD=%d, LED=%d, "
2496 "GPIN=%d\n", (lanai->status & STATUS_SOOL) ? 1 : 0,
2497 (lanai->status & STATUS_LOCD) ? 1 : 0,
2498 (lanai->status & STATUS_LED) ? 1 : 0,
2499 (lanai->status & STATUS_GPIN) ? 1 : 0);
2500 if (left-- == 0)
2501 return sprintf(page, "global buffer sizes: service=%Zu, "
2502 "aal0_rx=%Zu\n", lanai_buf_size(&lanai->service),
2503 lanai->naal0 ? lanai_buf_size(&lanai->aal0buf) : 0);
2504 if (left-- == 0) {
2505 get_statistics(lanai);
2506 return sprintf(page, "cells in error: overflow=%u, "
2507 "closed_vci=%u, bad_HEC=%u, rx_fifo=%u\n",
2508 lanai->stats.ovfl_trash, lanai->stats.vci_trash,
2509 lanai->stats.hec_err, lanai->stats.atm_ovfl);
2510 }
2511 if (left-- == 0)
2512 return sprintf(page, "PCI errors: parity_detect=%u, "
2513 "master_abort=%u, master_target_abort=%u,\n",
2514 lanai->stats.pcierr_parity_detect,
2515 lanai->stats.pcierr_serr_set,
2516 lanai->stats.pcierr_m_target_abort);
2517 if (left-- == 0)
2518 return sprintf(page, " slave_target_abort=%u, "
2519 "master_parity=%u\n", lanai->stats.pcierr_s_target_abort,
2520 lanai->stats.pcierr_master_parity);
2521 if (left-- == 0)
2522 return sprintf(page, " no_tx=%u, "
2523 "no_rx=%u, bad_rx_aal=%u\n", lanai->stats.service_norx,
2524 lanai->stats.service_notx,
2525 lanai->stats.service_rxnotaal5);
2526 if (left-- == 0)
2527 return sprintf(page, "resets: dma=%u, card=%u\n",
2528 lanai->stats.dma_reenable, lanai->stats.card_reset);
2529 /* At this point, "left" should be the VCI we're looking for */
2530 read_lock(&vcc_sklist_lock);
2531 for (; ; left++) {
2532 if (left >= NUM_VCI) {
2533 left = 0;
2534 goto out;
2535 }
2536 if ((lvcc = lanai->vccs[left]) != NULL)
2537 break;
2538 (*pos)++;
2539 }
2540 /* Note that we re-use "left" here since we're done with it */
2541 left = sprintf(page, "VCI %4d: nref=%d, rx_nomem=%u", (vci_t) left,
2542 lvcc->nref, lvcc->stats.rx_nomem);
2543 if (lvcc->rx.atmvcc != NULL) {
2544 left += sprintf(&page[left], ",\n rx_AAL=%d",
2545 lvcc->rx.atmvcc->qos.aal == ATM_AAL5 ? 5 : 0);
2546 if (lvcc->rx.atmvcc->qos.aal == ATM_AAL5)
2547 left += sprintf(&page[left], ", rx_buf_size=%Zu, "
2548 "rx_bad_len=%u,\n rx_service_trash=%u, "
2549 "rx_service_stream=%u, rx_bad_crc=%u",
2550 lanai_buf_size(&lvcc->rx.buf),
2551 lvcc->stats.x.aal5.rx_badlen,
2552 lvcc->stats.x.aal5.service_trash,
2553 lvcc->stats.x.aal5.service_stream,
2554 lvcc->stats.x.aal5.service_rxcrc);
2555 }
2556 if (lvcc->tx.atmvcc != NULL)
2557 left += sprintf(&page[left], ",\n tx_AAL=%d, "
2558 "tx_buf_size=%Zu, tx_qos=%cBR, tx_backlogged=%c",
2559 lvcc->tx.atmvcc->qos.aal == ATM_AAL5 ? 5 : 0,
2560 lanai_buf_size(&lvcc->tx.buf),
2561 lvcc->tx.atmvcc == lanai->cbrvcc ? 'C' : 'U',
2562 vcc_is_backlogged(lvcc) ? 'Y' : 'N');
2563 page[left++] = '\n';
2564 page[left] = '\0';
2565 out:
2566 read_unlock(&vcc_sklist_lock);
2567 return left;
2568}
2569#endif /* CONFIG_PROC_FS */
2570
2571/* -------------------- HOOKS: */
2572
2573static const struct atmdev_ops ops = {
2574 .dev_close = lanai_dev_close,
2575 .open = lanai_open,
2576 .close = lanai_close,
Linus Torvalds1da177e2005-04-16 15:20:36 -07002577 .getsockopt = NULL,
2578 .setsockopt = NULL,
2579 .send = lanai_send,
2580 .phy_put = NULL,
2581 .phy_get = NULL,
2582 .change_qos = lanai_change_qos,
2583 .proc_read = lanai_proc_read,
2584 .owner = THIS_MODULE
2585};
2586
2587/* initialize one probed card */
2588static int __devinit lanai_init_one(struct pci_dev *pci,
2589 const struct pci_device_id *ident)
2590{
2591 struct lanai_dev *lanai;
2592 struct atm_dev *atmdev;
2593 int result;
2594
Robert P. J. Day5cbded52006-12-13 00:35:56 -08002595 lanai = kmalloc(sizeof(*lanai), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002596 if (lanai == NULL) {
2597 printk(KERN_ERR DEV_LABEL
2598 ": couldn't allocate dev_data structure!\n");
2599 return -ENOMEM;
2600 }
2601
2602 atmdev = atm_dev_register(DEV_LABEL, &ops, -1, NULL);
2603 if (atmdev == NULL) {
2604 printk(KERN_ERR DEV_LABEL
2605 ": couldn't register atm device!\n");
2606 kfree(lanai);
2607 return -EBUSY;
2608 }
2609
2610 atmdev->dev_data = lanai;
2611 lanai->pci = pci;
2612 lanai->type = (enum lanai_type) ident->device;
2613
2614 result = lanai_dev_open(atmdev);
2615 if (result != 0) {
2616 DPRINTK("lanai_start() failed, err=%d\n", -result);
2617 atm_dev_deregister(atmdev);
2618 kfree(lanai);
2619 }
2620 return result;
2621}
2622
2623static struct pci_device_id lanai_pci_tbl[] = {
Jiri Slaby1d0ed382007-06-18 10:58:13 +02002624 { PCI_VDEVICE(EF, PCI_DEVICE_ID_EF_ATM_LANAI2) },
2625 { PCI_VDEVICE(EF, PCI_DEVICE_ID_EF_ATM_LANAIHB) },
Linus Torvalds1da177e2005-04-16 15:20:36 -07002626 { 0, } /* terminal entry */
2627};
2628MODULE_DEVICE_TABLE(pci, lanai_pci_tbl);
2629
2630static struct pci_driver lanai_driver = {
2631 .name = DEV_LABEL,
2632 .id_table = lanai_pci_tbl,
2633 .probe = lanai_init_one,
2634};
2635
2636static int __init lanai_module_init(void)
2637{
2638 int x;
2639
2640 x = pci_register_driver(&lanai_driver);
2641 if (x != 0)
2642 printk(KERN_ERR DEV_LABEL ": no adapter found\n");
2643 return x;
2644}
2645
2646static void __exit lanai_module_exit(void)
2647{
2648 /* We'll only get called when all the interfaces are already
2649 * gone, so there isn't much to do
2650 */
2651 DPRINTK("cleanup_module()\n");
Dave Jonesfd22f1e2005-11-29 16:14:33 -08002652 pci_unregister_driver(&lanai_driver);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002653}
2654
2655module_init(lanai_module_init);
2656module_exit(lanai_module_exit);
2657
2658MODULE_AUTHOR("Mitchell Blank Jr <mitch@sfgoth.com>");
2659MODULE_DESCRIPTION("Efficient Networks Speedstream 3010 driver");
2660MODULE_LICENSE("GPL");