blob: 70374907c020fdf8a33ac66706aa43a1d14d79e4 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001Lemma 1:
2 If ps_tq is scheduled, ps_tq_active is 1. ps_tq_int() can be called
3 only when ps_tq_active is 1.
4Proof: All assignments to ps_tq_active and all scheduling of ps_tq happen
5 under ps_spinlock. There are three places where that can happen:
6 one in ps_set_intr() (A) and two in ps_tq_int() (B and C).
7 Consider the sequnce of these events. A can not be preceded by
8 anything except B, since it is under if (!ps_tq_active) under
9 ps_spinlock. C is always preceded by B, since we can't reach it
10 other than through B and we don't drop ps_spinlock between them.
11 IOW, the sequence is A?(BA|BC|B)*. OTOH, number of B can not exceed
12 the sum of numbers of A and C, since each call of ps_tq_int() is
13 the result of ps_tq execution. Therefore, the sequence starts with
14 A and each B is preceded by either A or C. Moments when we enter
15 ps_tq_int() are sandwiched between {A,C} and B in that sequence,
16 since at any time number of B can not exceed the number of these
17 moments which, in turn, can not exceed the number of A and C.
18 In other words, the sequence of events is (A or C set ps_tq_active to
19 1 and schedule ps_tq, ps_tq is executed, ps_tq_int() is entered,
20 B resets ps_tq_active)*.
21
22
23consider the following area:
24 * in do_pd_request1(): to calls of pi_do_claimed() and return in
25 case when pd_req is NULL.
26 * in next_request(): to call of do_pd_request1()
27 * in do_pd_read(): to call of ps_set_intr()
28 * in do_pd_read_start(): to calls of pi_do_claimed(), next_request()
29and ps_set_intr()
30 * in do_pd_read_drq(): to calls of pi_do_claimed() and next_request()
31 * in do_pd_write(): to call of ps_set_intr()
32 * in do_pd_write_start(): to calls of pi_do_claimed(), next_request()
33and ps_set_intr()
34 * in do_pd_write_done(): to calls of pi_do_claimed() and next_request()
35 * in ps_set_intr(): to check for ps_tq_active and to scheduling
36 ps_tq if ps_tq_active was 0.
37 * in ps_tq_int(): from the moment when we get ps_spinlock() to the
38 return, call of con() or scheduling ps_tq.
39 * in pi_schedule_claimed() when called from pi_do_claimed() called from
40 pd.c, everything until returning 1 or setting or setting ->claim_cont
41 on the path that returns 0
42 * in pi_do_claimed() when called from pd.c, everything until the call
43 of pi_do_claimed() plus the everything until the call of cont() if
44 pi_do_claimed() has returned 1.
45 * in pi_wake_up() called for PIA that belongs to pd.c, everything from
46 the moment when pi_spinlock has been acquired.
47
48Lemma 2:
49 1) at any time at most one thread of execution can be in that area or
50 be preempted there.
51 2) When there is such a thread, pd_busy is set or pd_lock is held by
52 that thread.
53 3) When there is such a thread, ps_tq_active is 0 or ps_spinlock is
54 held by that thread.
55 4) When there is such a thread, all PIA belonging to pd.c have NULL
56 ->claim_cont or pi_spinlock is held by thread in question.
57
58Proof: consider the first moment when the above is not true.
59
60(1) can become not true if some thread enters that area while another is there.
61 a) do_pd_request1() can be called from next_request() or do_pd_request()
62 In the first case the thread was already in the area. In the second,
63 the thread was holding pd_lock and found pd_busy not set, which would
64 mean that (2) was already not true.
65 b) ps_set_intr() and pi_schedule_claimed() can be called only from the
66 area.
67 c) pi_do_claimed() is called by pd.c only from the area.
68 d) ps_tq_int() can enter the area only when the thread is holding
69 ps_spinlock and ps_tq_active is 1 (due to Lemma 1). It means that
70 (3) was already not true.
71 e) do_pd_{read,write}* could be called only from the area. The only
72 case that needs consideration is call from pi_wake_up() and there
73 we would have to be called for the PIA that got ->claimed_cont
74 from pd.c. That could happen only if pi_do_claimed() had been
75 called from pd.c for that PIA, which happens only for PIA belonging
76 to pd.c.
77 f) pi_wake_up() can enter the area only when the thread is holding
78 pi_spinlock and ->claimed_cont is non-NULL for PIA belonging to
79 pd.c. It means that (4) was already not true.
80
81(2) can become not true only when pd_lock is released by the thread in question.
82 Indeed, pd_busy is reset only in the area and thread that resets
83 it is holding pd_lock. The only place within the area where we
84 release pd_lock is in pd_next_buf() (called from within the area).
85 But that code does not reset pd_busy, so pd_busy would have to be
86 0 when pd_next_buf() had acquired pd_lock. If it become 0 while
87 we were acquiring the lock, (1) would be already false, since
88 the thread that had reset it would be in the area simulateously.
89 If it was 0 before we tried to acquire pd_lock, (2) would be
90 already false.
91
92For similar reasons, (3) can become not true only when ps_spinlock is released
93by the thread in question. However, all such places within the area are right
94after resetting ps_tq_active to 0.
95
96(4) is done the same way - all places where we release pi_spinlock within
97the area are either after resetting ->claimed_cont to NULL while holding
98pi_spinlock, or after not tocuhing ->claimed_cont since acquiring pi_spinlock
99also in the area. The only place where ->claimed_cont is made non-NULL is
100in the area, under pi_spinlock and we do not release it until after leaving
101the area.
102
103QED.
104
105
106Corollary 1: ps_tq_active can be killed. Indeed, the only place where we
107check its value is in ps_set_intr() and if it had been non-zero at that
108point, we would have violated either (2.1) (if it was set while ps_set_intr()
109was acquiring ps_spinlock) or (2.3) (if it was set when we started to
110acquire ps_spinlock).
111
112Corollary 2: ps_spinlock can be killed. Indeed, Lemma 1 and Lemma 2 show
113that the only possible contention is between scheduling ps_tq followed by
114immediate release of spinlock and beginning of execution of ps_tq on
115another CPU.
116
117Corollary 3: assignment to pd_busy in do_pd_read_start() and do_pd_write_start()
118can be killed. Indeed, we are not holding pd_lock and thus pd_busy is already
1191 here.
120
121Corollary 4: in ps_tq_int() uses of con can be replaced with uses of
122ps_continuation, since the latter is changed only from the area.
123We don't need to reset it to NULL, since we are guaranteed that there
124will be a call of ps_set_intr() before we look at ps_continuation again.
125We can remove the check for ps_continuation being NULL for the same
126reason - the value is guaranteed to be set by the last ps_set_intr() and
127we never pass it NULL. Assignements in the beginning of ps_set_intr()
128can be taken to callers as long as they remain within the area.