blob: 14964d0a0e9dabc2bde55a7e6c8c54fb605bf3d2 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * NCR 5380 defines
3 *
4 * Copyright 1993, Drew Eckhardt
5 * Visionary Computing
6 * (Unix consulting and custom programming)
7 * drew@colorado.edu
8 * +1 (303) 666-5836
9 *
10 * DISTRIBUTION RELEASE 7
11 *
12 * For more information, please consult
13 *
14 * NCR 5380 Family
15 * SCSI Protocol Controller
16 * Databook
17 * NCR Microelectronics
18 * 1635 Aeroplaza Drive
19 * Colorado Springs, CO 80916
20 * 1+ (719) 578-3400
21 * 1+ (800) 334-5454
22 */
23
24/*
25 * $Log: NCR5380.h,v $
26 */
27
28#ifndef NCR5380_H
29#define NCR5380_H
30
31#include <linux/interrupt.h>
32
Boaz Harrosh28424d32007-09-10 22:37:45 +030033#ifdef AUTOSENSE
34#include <scsi/scsi_eh.h>
35#endif
36
Linus Torvalds1da177e2005-04-16 15:20:36 -070037#define NCR5380_PUBLIC_RELEASE 7
38#define NCR53C400_PUBLIC_RELEASE 2
39
40#define NDEBUG_ARBITRATION 0x1
41#define NDEBUG_AUTOSENSE 0x2
42#define NDEBUG_DMA 0x4
43#define NDEBUG_HANDSHAKE 0x8
44#define NDEBUG_INFORMATION 0x10
45#define NDEBUG_INIT 0x20
46#define NDEBUG_INTR 0x40
47#define NDEBUG_LINKED 0x80
48#define NDEBUG_MAIN 0x100
49#define NDEBUG_NO_DATAOUT 0x200
50#define NDEBUG_NO_WRITE 0x400
51#define NDEBUG_PIO 0x800
52#define NDEBUG_PSEUDO_DMA 0x1000
53#define NDEBUG_QUEUES 0x2000
54#define NDEBUG_RESELECTION 0x4000
55#define NDEBUG_SELECTION 0x8000
56#define NDEBUG_USLEEP 0x10000
57#define NDEBUG_LAST_BYTE_SENT 0x20000
58#define NDEBUG_RESTART_SELECT 0x40000
59#define NDEBUG_EXTENDED 0x80000
60#define NDEBUG_C400_PREAD 0x100000
61#define NDEBUG_C400_PWRITE 0x200000
62#define NDEBUG_LISTS 0x400000
63
64#define NDEBUG_ANY 0xFFFFFFFFUL
65
66/*
67 * The contents of the OUTPUT DATA register are asserted on the bus when
68 * either arbitration is occurring or the phase-indicating signals (
69 * IO, CD, MSG) in the TARGET COMMAND register and the ASSERT DATA
70 * bit in the INITIATOR COMMAND register is set.
71 */
72
73#define OUTPUT_DATA_REG 0 /* wo DATA lines on SCSI bus */
74#define CURRENT_SCSI_DATA_REG 0 /* ro same */
75
76#define INITIATOR_COMMAND_REG 1 /* rw */
77#define ICR_ASSERT_RST 0x80 /* rw Set to assert RST */
78#define ICR_ARBITRATION_PROGRESS 0x40 /* ro Indicates arbitration complete */
79#define ICR_TRI_STATE 0x40 /* wo Set to tri-state drivers */
80#define ICR_ARBITRATION_LOST 0x20 /* ro Indicates arbitration lost */
81#define ICR_DIFF_ENABLE 0x20 /* wo Set to enable diff. drivers */
82#define ICR_ASSERT_ACK 0x10 /* rw ini Set to assert ACK */
83#define ICR_ASSERT_BSY 0x08 /* rw Set to assert BSY */
84#define ICR_ASSERT_SEL 0x04 /* rw Set to assert SEL */
85#define ICR_ASSERT_ATN 0x02 /* rw Set to assert ATN */
86#define ICR_ASSERT_DATA 0x01 /* rw SCSI_DATA_REG is asserted */
87
88#ifdef DIFFERENTIAL
89#define ICR_BASE ICR_DIFF_ENABLE
90#else
91#define ICR_BASE 0
92#endif
93
94#define MODE_REG 2
95/*
96 * Note : BLOCK_DMA code will keep DRQ asserted for the duration of the
97 * transfer, causing the chip to hog the bus. You probably don't want
98 * this.
99 */
100#define MR_BLOCK_DMA_MODE 0x80 /* rw block mode DMA */
101#define MR_TARGET 0x40 /* rw target mode */
102#define MR_ENABLE_PAR_CHECK 0x20 /* rw enable parity checking */
103#define MR_ENABLE_PAR_INTR 0x10 /* rw enable bad parity interrupt */
104#define MR_ENABLE_EOP_INTR 0x08 /* rw enable eop interrupt */
105#define MR_MONITOR_BSY 0x04 /* rw enable int on unexpected bsy fail */
106#define MR_DMA_MODE 0x02 /* rw DMA / pseudo DMA mode */
107#define MR_ARBITRATE 0x01 /* rw start arbitration */
108
109#ifdef PARITY
110#define MR_BASE MR_ENABLE_PAR_CHECK
111#else
112#define MR_BASE 0
113#endif
114
115#define TARGET_COMMAND_REG 3
116#define TCR_LAST_BYTE_SENT 0x80 /* ro DMA done */
117#define TCR_ASSERT_REQ 0x08 /* tgt rw assert REQ */
118#define TCR_ASSERT_MSG 0x04 /* tgt rw assert MSG */
119#define TCR_ASSERT_CD 0x02 /* tgt rw assert CD */
120#define TCR_ASSERT_IO 0x01 /* tgt rw assert IO */
121
122#define STATUS_REG 4 /* ro */
123/*
124 * Note : a set bit indicates an active signal, driven by us or another
125 * device.
126 */
127#define SR_RST 0x80
128#define SR_BSY 0x40
129#define SR_REQ 0x20
130#define SR_MSG 0x10
131#define SR_CD 0x08
132#define SR_IO 0x04
133#define SR_SEL 0x02
134#define SR_DBP 0x01
135
136/*
137 * Setting a bit in this register will cause an interrupt to be generated when
138 * BSY is false and SEL true and this bit is asserted on the bus.
139 */
140#define SELECT_ENABLE_REG 4 /* wo */
141
142#define BUS_AND_STATUS_REG 5 /* ro */
143#define BASR_END_DMA_TRANSFER 0x80 /* ro set on end of transfer */
144#define BASR_DRQ 0x40 /* ro mirror of DRQ pin */
145#define BASR_PARITY_ERROR 0x20 /* ro parity error detected */
146#define BASR_IRQ 0x10 /* ro mirror of IRQ pin */
147#define BASR_PHASE_MATCH 0x08 /* ro Set when MSG CD IO match TCR */
148#define BASR_BUSY_ERROR 0x04 /* ro Unexpected change to inactive state */
149#define BASR_ATN 0x02 /* ro BUS status */
150#define BASR_ACK 0x01 /* ro BUS status */
151
152/* Write any value to this register to start a DMA send */
153#define START_DMA_SEND_REG 5 /* wo */
154
155/*
156 * Used in DMA transfer mode, data is latched from the SCSI bus on
157 * the falling edge of REQ (ini) or ACK (tgt)
158 */
159#define INPUT_DATA_REG 6 /* ro */
160
161/* Write any value to this register to start a DMA receive */
162#define START_DMA_TARGET_RECEIVE_REG 6 /* wo */
163
164/* Read this register to clear interrupt conditions */
165#define RESET_PARITY_INTERRUPT_REG 7 /* ro */
166
167/* Write any value to this register to start an ini mode DMA receive */
168#define START_DMA_INITIATOR_RECEIVE_REG 7 /* wo */
169
170#define C400_CONTROL_STATUS_REG NCR53C400_register_offset-8 /* rw */
171
172#define CSR_RESET 0x80 /* wo Resets 53c400 */
173#define CSR_53C80_REG 0x80 /* ro 5380 registers busy */
174#define CSR_TRANS_DIR 0x40 /* rw Data transfer direction */
175#define CSR_SCSI_BUFF_INTR 0x20 /* rw Enable int on transfer ready */
176#define CSR_53C80_INTR 0x10 /* rw Enable 53c80 interrupts */
177#define CSR_SHARED_INTR 0x08 /* rw Interrupt sharing */
178#define CSR_HOST_BUF_NOT_RDY 0x04 /* ro Is Host buffer ready */
179#define CSR_SCSI_BUF_RDY 0x02 /* ro SCSI buffer read */
180#define CSR_GATED_53C80_IRQ 0x01 /* ro Last block xferred */
181
182#if 0
183#define CSR_BASE CSR_SCSI_BUFF_INTR | CSR_53C80_INTR
184#else
185#define CSR_BASE CSR_53C80_INTR
186#endif
187
188/* Number of 128-byte blocks to be transferred */
189#define C400_BLOCK_COUNTER_REG NCR53C400_register_offset-7 /* rw */
190
191/* Resume transfer after disconnect */
192#define C400_RESUME_TRANSFER_REG NCR53C400_register_offset-6 /* wo */
193
194/* Access to host buffer stack */
195#define C400_HOST_BUFFER NCR53C400_register_offset-4 /* rw */
196
197
198/* Note : PHASE_* macros are based on the values of the STATUS register */
199#define PHASE_MASK (SR_MSG | SR_CD | SR_IO)
200
201#define PHASE_DATAOUT 0
202#define PHASE_DATAIN SR_IO
203#define PHASE_CMDOUT SR_CD
204#define PHASE_STATIN (SR_CD | SR_IO)
205#define PHASE_MSGOUT (SR_MSG | SR_CD)
206#define PHASE_MSGIN (SR_MSG | SR_CD | SR_IO)
207#define PHASE_UNKNOWN 0xff
208
209/*
210 * Convert status register phase to something we can use to set phase in
211 * the target register so we can get phase mismatch interrupts on DMA
212 * transfers.
213 */
214
215#define PHASE_SR_TO_TCR(phase) ((phase) >> 2)
216
217/*
218 * The internal should_disconnect() function returns these based on the
219 * expected length of a disconnect if a device supports disconnect/
220 * reconnect.
221 */
222
223#define DISCONNECT_NONE 0
224#define DISCONNECT_TIME_TO_DATA 1
225#define DISCONNECT_LONG 2
226
227/*
228 * These are "special" values for the tag parameter passed to NCR5380_select.
229 */
230
231#define TAG_NEXT -1 /* Use next free tag */
232#define TAG_NONE -2 /*
233 * Establish I_T_L nexus instead of I_T_L_Q
234 * even on SCSI-II devices.
235 */
236
237/*
238 * These are "special" values for the irq and dma_channel fields of the
239 * Scsi_Host structure
240 */
241
242#define SCSI_IRQ_NONE 255
243#define DMA_NONE 255
244#define IRQ_AUTO 254
245#define DMA_AUTO 254
246#define PORT_AUTO 0xffff /* autoprobe io port for 53c400a */
247
248#define FLAG_HAS_LAST_BYTE_SENT 1 /* NCR53c81 or better */
249#define FLAG_CHECK_LAST_BYTE_SENT 2 /* Only test once */
250#define FLAG_NCR53C400 4 /* NCR53c400 */
251#define FLAG_NO_PSEUDO_DMA 8 /* Inhibit DMA */
252#define FLAG_DTC3181E 16 /* DTC3181E */
253
254#ifndef ASM
255struct NCR5380_hostdata {
256 NCR5380_implementation_fields; /* implementation specific */
257 struct Scsi_Host *host; /* Host backpointer */
258 unsigned char id_mask, id_higher_mask; /* 1 << id, all bits greater */
259 unsigned char targets_present; /* targets we have connected
260 to, so we can call a select
261 failure a retryable condition */
262 volatile unsigned char busy[8]; /* index = target, bit = lun */
263#if defined(REAL_DMA) || defined(REAL_DMA_POLL)
264 volatile int dma_len; /* requested length of DMA */
265#endif
266 volatile unsigned char last_message; /* last message OUT */
267 volatile Scsi_Cmnd *connected; /* currently connected command */
268 volatile Scsi_Cmnd *issue_queue; /* waiting to be issued */
269 volatile Scsi_Cmnd *disconnected_queue; /* waiting for reconnect */
270 volatile int restart_select; /* we have disconnected,
271 used to restart
272 NCR5380_select() */
273 volatile unsigned aborted:1; /* flag, says aborted */
274 int flags;
275 unsigned long time_expires; /* in jiffies, set prior to sleeping */
276 int select_time; /* timer in select for target response */
277 volatile Scsi_Cmnd *selecting;
David Howellsc4028952006-11-22 14:57:56 +0000278 struct delayed_work coroutine; /* our co-routine */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700279#ifdef NCR5380_STATS
280 unsigned timebase; /* Base for time calcs */
281 long time_read[8]; /* time to do reads */
282 long time_write[8]; /* time to do writes */
283 unsigned long bytes_read[8]; /* bytes read */
284 unsigned long bytes_write[8]; /* bytes written */
285 unsigned pendingr;
286 unsigned pendingw;
287#endif
Boaz Harrosh28424d32007-09-10 22:37:45 +0300288#ifdef AUTOSENSE
289 struct scsi_eh_save ses;
290#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -0700291};
292
293#ifdef __KERNEL__
294
295#define dprintk(a,b) do {} while(0)
296#define NCR5380_dprint(a,b) do {} while(0)
297#define NCR5380_dprint_phase(a,b) do {} while(0)
298
299#if defined(AUTOPROBE_IRQ)
300static int NCR5380_probe_irq(struct Scsi_Host *instance, int possible);
301#endif
302static int NCR5380_init(struct Scsi_Host *instance, int flags);
303static void NCR5380_exit(struct Scsi_Host *instance);
304static void NCR5380_information_transfer(struct Scsi_Host *instance);
305#ifndef DONT_USE_INTR
David Howells7d12e782006-10-05 14:55:46 +0100306static irqreturn_t NCR5380_intr(int irq, void *dev_id);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700307#endif
David Howellsc4028952006-11-22 14:57:56 +0000308static void NCR5380_main(struct work_struct *work);
Andrew Morton702809c2007-05-23 14:41:56 -0700309static void __maybe_unused NCR5380_print_options(struct Scsi_Host *instance);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700310#ifdef NDEBUG
311static void NCR5380_print_phase(struct Scsi_Host *instance);
312static void NCR5380_print(struct Scsi_Host *instance);
313#endif
314static int NCR5380_abort(Scsi_Cmnd * cmd);
315static int NCR5380_bus_reset(Scsi_Cmnd * cmd);
Jeff Garzikf2812332010-11-16 02:10:29 -0500316static int NCR5380_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
Al Virodd7ab712013-03-31 01:15:54 -0400317static int __maybe_unused NCR5380_show_info(struct seq_file *,
318 struct Scsi_Host *);
319static int __maybe_unused NCR5380_write_info(struct Scsi_Host *instance,
320 char *buffer, int length);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700321
322static void NCR5380_reselect(struct Scsi_Host *instance);
323static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd * cmd, int tag);
324#if defined(PSEUDO_DMA) || defined(REAL_DMA) || defined(REAL_DMA_POLL)
325static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
326#endif
327static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
328
329#if (defined(REAL_DMA) || defined(REAL_DMA_POLL))
330
331#if defined(i386) || defined(__alpha__)
332
333/**
334 * NCR5380_pc_dma_setup - setup ISA DMA
335 * @instance: adapter to set up
336 * @ptr: block to transfer (virtual address)
337 * @count: number of bytes to transfer
338 * @mode: DMA controller mode to use
339 *
340 * Program the DMA controller ready to perform an ISA DMA transfer
341 * on this chip.
342 *
343 * Locks: takes and releases the ISA DMA lock.
344 */
345
346static __inline__ int NCR5380_pc_dma_setup(struct Scsi_Host *instance, unsigned char *ptr, unsigned int count, unsigned char mode)
347{
348 unsigned limit;
349 unsigned long bus_addr = virt_to_bus(ptr);
350 unsigned long flags;
351
352 if (instance->dma_channel <= 3) {
353 if (count > 65536)
354 count = 65536;
355 limit = 65536 - (bus_addr & 0xFFFF);
356 } else {
357 if (count > 65536 * 2)
358 count = 65536 * 2;
359 limit = 65536 * 2 - (bus_addr & 0x1FFFF);
360 }
361
362 if (count > limit)
363 count = limit;
364
365 if ((count & 1) || (bus_addr & 1))
366 panic("scsi%d : attempted unaligned DMA transfer\n", instance->host_no);
367
368 flags=claim_dma_lock();
369 disable_dma(instance->dma_channel);
370 clear_dma_ff(instance->dma_channel);
371 set_dma_addr(instance->dma_channel, bus_addr);
372 set_dma_count(instance->dma_channel, count);
373 set_dma_mode(instance->dma_channel, mode);
374 enable_dma(instance->dma_channel);
375 release_dma_lock(flags);
376
377 return count;
378}
379
380/**
381 * NCR5380_pc_dma_write_setup - setup ISA DMA write
382 * @instance: adapter to set up
383 * @ptr: block to transfer (virtual address)
384 * @count: number of bytes to transfer
385 *
386 * Program the DMA controller ready to perform an ISA DMA write to the
387 * SCSI controller.
388 *
389 * Locks: called routines take and release the ISA DMA lock.
390 */
391
392static __inline__ int NCR5380_pc_dma_write_setup(struct Scsi_Host *instance, unsigned char *src, unsigned int count)
393{
394 return NCR5380_pc_dma_setup(instance, src, count, DMA_MODE_WRITE);
395}
396
397/**
398 * NCR5380_pc_dma_read_setup - setup ISA DMA read
399 * @instance: adapter to set up
400 * @ptr: block to transfer (virtual address)
401 * @count: number of bytes to transfer
402 *
403 * Program the DMA controller ready to perform an ISA DMA read from the
404 * SCSI controller.
405 *
406 * Locks: called routines take and release the ISA DMA lock.
407 */
408
409static __inline__ int NCR5380_pc_dma_read_setup(struct Scsi_Host *instance, unsigned char *src, unsigned int count)
410{
411 return NCR5380_pc_dma_setup(instance, src, count, DMA_MODE_READ);
412}
413
414/**
415 * NCR5380_pc_dma_residual - return bytes left
416 * @instance: adapter
417 *
418 * Reports the number of bytes left over after the DMA was terminated.
419 *
420 * Locks: takes and releases the ISA DMA lock.
421 */
422
423static __inline__ int NCR5380_pc_dma_residual(struct Scsi_Host *instance)
424{
425 unsigned long flags;
426 int tmp;
427
428 flags = claim_dma_lock();
429 clear_dma_ff(instance->dma_channel);
430 tmp = get_dma_residue(instance->dma_channel);
431 release_dma_lock(flags);
432
433 return tmp;
434}
435#endif /* defined(i386) || defined(__alpha__) */
436#endif /* defined(REAL_DMA) */
437#endif /* __KERNEL__ */
438#endif /* ndef ASM */
439#endif /* NCR5380_H */