blob: 5cd60d6388ec88b683e88688f2df0d71cfbfa119 [file] [log] [blame]
Akira Iguchia619f981b2007-01-26 16:28:18 +09001/*
2 * Support for IDE interfaces on Celleb platform
3 *
4 * (C) Copyright 2006 TOSHIBA CORPORATION
5 *
6 * This code is based on drivers/ata/ata_piix.c:
7 * Copyright 2003-2005 Red Hat Inc
8 * Copyright 2003-2005 Jeff Garzik
9 * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
10 * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
Alan Coxab771632008-10-27 15:09:10 +000011 * Copyright (C) 2003 Red Hat Inc
Akira Iguchia619f981b2007-01-26 16:28:18 +090012 *
13 * and drivers/ata/ahci.c:
14 * Copyright 2004-2005 Red Hat, Inc.
15 *
16 * and drivers/ata/libata-core.c:
17 * Copyright 2003-2004 Red Hat, Inc. All rights reserved.
18 * Copyright 2003-2004 Jeff Garzik
19 *
20 * This program is free software; you can redistribute it and/or modify
21 * it under the terms of the GNU General Public License as published by
22 * the Free Software Foundation; either version 2 of the License, or
23 * (at your option) any later version.
24 *
25 * This program is distributed in the hope that it will be useful,
26 * but WITHOUT ANY WARRANTY; without even the implied warranty of
27 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
28 * GNU General Public License for more details.
29 *
30 * You should have received a copy of the GNU General Public License along
31 * with this program; if not, write to the Free Software Foundation, Inc.,
32 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
33 */
34
35#include <linux/kernel.h>
36#include <linux/module.h>
37#include <linux/pci.h>
Akira Iguchia619f981b2007-01-26 16:28:18 +090038#include <linux/blkdev.h>
39#include <linux/delay.h>
40#include <linux/device.h>
41#include <scsi/scsi_host.h>
42#include <linux/libata.h>
43
44#define DRV_NAME "pata_scc"
Jeff Garzik2a3103c2007-08-31 04:54:06 -040045#define DRV_VERSION "0.3"
Akira Iguchia619f981b2007-01-26 16:28:18 +090046
47#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4
48
49/* PCI BARs */
50#define SCC_CTRL_BAR 0
51#define SCC_BMID_BAR 1
52
53/* offset of CTRL registers */
54#define SCC_CTL_PIOSHT 0x000
55#define SCC_CTL_PIOCT 0x004
56#define SCC_CTL_MDMACT 0x008
57#define SCC_CTL_MCRCST 0x00C
58#define SCC_CTL_SDMACT 0x010
59#define SCC_CTL_SCRCST 0x014
60#define SCC_CTL_UDENVT 0x018
61#define SCC_CTL_TDVHSEL 0x020
62#define SCC_CTL_MODEREG 0x024
63#define SCC_CTL_ECMODE 0xF00
64#define SCC_CTL_MAEA0 0xF50
65#define SCC_CTL_MAEC0 0xF54
66#define SCC_CTL_CCKCTRL 0xFF0
67
68/* offset of BMID registers */
69#define SCC_DMA_CMD 0x000
70#define SCC_DMA_STATUS 0x004
71#define SCC_DMA_TABLE_OFS 0x008
72#define SCC_DMA_INTMASK 0x010
73#define SCC_DMA_INTST 0x014
74#define SCC_DMA_PTERADD 0x018
75#define SCC_REG_CMD_ADDR 0x020
76#define SCC_REG_DATA 0x000
77#define SCC_REG_ERR 0x004
78#define SCC_REG_FEATURE 0x004
79#define SCC_REG_NSECT 0x008
80#define SCC_REG_LBAL 0x00C
81#define SCC_REG_LBAM 0x010
82#define SCC_REG_LBAH 0x014
83#define SCC_REG_DEVICE 0x018
84#define SCC_REG_STATUS 0x01C
85#define SCC_REG_CMD 0x01C
86#define SCC_REG_ALTSTATUS 0x020
87
88/* register value */
89#define TDVHSEL_MASTER 0x00000001
90#define TDVHSEL_SLAVE 0x00000004
91
92#define MODE_JCUSFEN 0x00000080
93
94#define ECMODE_VALUE 0x01
95
96#define CCKCTRL_ATARESET 0x00040000
97#define CCKCTRL_BUFCNT 0x00020000
98#define CCKCTRL_CRST 0x00010000
99#define CCKCTRL_OCLKEN 0x00000100
100#define CCKCTRL_ATACLKOEN 0x00000002
101#define CCKCTRL_LCLKEN 0x00000001
102
103#define QCHCD_IOS_SS 0x00000001
104
105#define QCHSD_STPDIAG 0x00020000
106
107#define INTMASK_MSK 0xD1000012
108#define INTSTS_SERROR 0x80000000
109#define INTSTS_PRERR 0x40000000
110#define INTSTS_RERR 0x10000000
111#define INTSTS_ICERR 0x01000000
112#define INTSTS_BMSINT 0x00000010
113#define INTSTS_BMHE 0x00000008
114#define INTSTS_IOIRQS 0x00000004
115#define INTSTS_INTRQ 0x00000002
116#define INTSTS_ACTEINT 0x00000001
117
118
119/* PIO transfer mode table */
120/* JCHST */
121static const unsigned long JCHSTtbl[2][7] = {
122 {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */
123 {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */
124};
125
126/* JCHHT */
127static const unsigned long JCHHTtbl[2][7] = {
128 {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */
129 {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */
130};
131
132/* JCHCT */
133static const unsigned long JCHCTtbl[2][7] = {
134 {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */
135 {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */
136};
137
138/* DMA transfer mode table */
139/* JCHDCTM/JCHDCTS */
140static const unsigned long JCHDCTxtbl[2][7] = {
141 {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */
142 {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */
143};
144
145/* JCSTWTM/JCSTWTS */
146static const unsigned long JCSTWTxtbl[2][7] = {
147 {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */
148 {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
149};
150
151/* JCTSS */
152static const unsigned long JCTSStbl[2][7] = {
153 {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */
154 {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */
155};
156
157/* JCENVT */
158static const unsigned long JCENVTtbl[2][7] = {
159 {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */
160 {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
161};
162
163/* JCACTSELS/JCACTSELM */
164static const unsigned long JCACTSELtbl[2][7] = {
165 {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */
166 {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */
167};
168
169static const struct pci_device_id scc_pci_tbl[] = {
Peter Hueweaf4d6e22010-07-15 20:39:43 +0200170 { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0},
Akira Iguchia619f981b2007-01-26 16:28:18 +0900171 { } /* terminate list */
172};
173
174/**
175 * scc_set_piomode - Initialize host controller PATA PIO timings
176 * @ap: Port whose timings we are configuring
177 * @adev: um
178 *
179 * Set PIO mode for device.
180 *
181 * LOCKING:
182 * None (inherited from caller).
183 */
184
185static void scc_set_piomode (struct ata_port *ap, struct ata_device *adev)
186{
187 unsigned int pio = adev->pio_mode - XFER_PIO_0;
188 void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR];
189 void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL;
190 void __iomem *piosht_port = ctrl_base + SCC_CTL_PIOSHT;
191 void __iomem *pioct_port = ctrl_base + SCC_CTL_PIOCT;
192 unsigned long reg;
193 int offset;
194
195 reg = in_be32(cckctrl_port);
196 if (reg & CCKCTRL_ATACLKOEN)
197 offset = 1; /* 133MHz */
198 else
199 offset = 0; /* 100MHz */
200
201 reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio];
202 out_be32(piosht_port, reg);
203 reg = JCHCTtbl[offset][pio];
204 out_be32(pioct_port, reg);
205}
206
207/**
208 * scc_set_dmamode - Initialize host controller PATA DMA timings
209 * @ap: Port whose timings we are configuring
210 * @adev: um
Akira Iguchia619f981b2007-01-26 16:28:18 +0900211 *
212 * Set UDMA mode for device.
213 *
214 * LOCKING:
215 * None (inherited from caller).
216 */
217
218static void scc_set_dmamode (struct ata_port *ap, struct ata_device *adev)
219{
220 unsigned int udma = adev->dma_mode;
221 unsigned int is_slave = (adev->devno != 0);
222 u8 speed = udma;
223 void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR];
224 void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL;
225 void __iomem *mdmact_port = ctrl_base + SCC_CTL_MDMACT;
226 void __iomem *mcrcst_port = ctrl_base + SCC_CTL_MCRCST;
227 void __iomem *sdmact_port = ctrl_base + SCC_CTL_SDMACT;
228 void __iomem *scrcst_port = ctrl_base + SCC_CTL_SCRCST;
229 void __iomem *udenvt_port = ctrl_base + SCC_CTL_UDENVT;
230 void __iomem *tdvhsel_port = ctrl_base + SCC_CTL_TDVHSEL;
231 int offset, idx;
232
Jeff Garzika84471f2007-02-26 05:51:33 -0500233 if (in_be32(cckctrl_port) & CCKCTRL_ATACLKOEN)
Akira Iguchia619f981b2007-01-26 16:28:18 +0900234 offset = 1; /* 133MHz */
235 else
236 offset = 0; /* 100MHz */
237
238 if (speed >= XFER_UDMA_0)
239 idx = speed - XFER_UDMA_0;
240 else
241 return;
242
243 if (is_slave) {
244 out_be32(sdmact_port, JCHDCTxtbl[offset][idx]);
245 out_be32(scrcst_port, JCSTWTxtbl[offset][idx]);
246 out_be32(tdvhsel_port,
247 (in_be32(tdvhsel_port) & ~TDVHSEL_SLAVE) | (JCACTSELtbl[offset][idx] << 2));
248 } else {
249 out_be32(mdmact_port, JCHDCTxtbl[offset][idx]);
250 out_be32(mcrcst_port, JCSTWTxtbl[offset][idx]);
251 out_be32(tdvhsel_port,
252 (in_be32(tdvhsel_port) & ~TDVHSEL_MASTER) | JCACTSELtbl[offset][idx]);
253 }
254 out_be32(udenvt_port,
255 JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]);
256}
257
Akira Iguchidcd03442007-07-17 12:10:17 +0900258unsigned long scc_mode_filter(struct ata_device *adev, unsigned long mask)
259{
260 /* errata A308 workaround: limit ATAPI UDMA mode to UDMA4 */
261 if (adev->class == ATA_DEV_ATAPI &&
262 (mask & (0xE0 << ATA_SHIFT_UDMA))) {
263 printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME);
264 mask &= ~(0xE0 << ATA_SHIFT_UDMA);
265 }
Tejun Heoc7087652010-05-10 21:41:34 +0200266 return mask;
Akira Iguchidcd03442007-07-17 12:10:17 +0900267}
268
Akira Iguchia619f981b2007-01-26 16:28:18 +0900269/**
270 * scc_tf_load - send taskfile registers to host controller
271 * @ap: Port to which output is sent
272 * @tf: ATA taskfile register set
273 *
Tejun Heo9363c382008-04-07 22:47:16 +0900274 * Note: Original code is ata_sff_tf_load().
Akira Iguchia619f981b2007-01-26 16:28:18 +0900275 */
276
277static void scc_tf_load (struct ata_port *ap, const struct ata_taskfile *tf)
278{
279 struct ata_ioports *ioaddr = &ap->ioaddr;
280 unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
281
282 if (tf->ctl != ap->last_ctl) {
283 out_be32(ioaddr->ctl_addr, tf->ctl);
284 ap->last_ctl = tf->ctl;
285 ata_wait_idle(ap);
286 }
287
288 if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
289 out_be32(ioaddr->feature_addr, tf->hob_feature);
290 out_be32(ioaddr->nsect_addr, tf->hob_nsect);
291 out_be32(ioaddr->lbal_addr, tf->hob_lbal);
292 out_be32(ioaddr->lbam_addr, tf->hob_lbam);
293 out_be32(ioaddr->lbah_addr, tf->hob_lbah);
294 VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
295 tf->hob_feature,
296 tf->hob_nsect,
297 tf->hob_lbal,
298 tf->hob_lbam,
299 tf->hob_lbah);
300 }
301
302 if (is_addr) {
303 out_be32(ioaddr->feature_addr, tf->feature);
304 out_be32(ioaddr->nsect_addr, tf->nsect);
305 out_be32(ioaddr->lbal_addr, tf->lbal);
306 out_be32(ioaddr->lbam_addr, tf->lbam);
307 out_be32(ioaddr->lbah_addr, tf->lbah);
308 VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
309 tf->feature,
310 tf->nsect,
311 tf->lbal,
312 tf->lbam,
313 tf->lbah);
314 }
315
316 if (tf->flags & ATA_TFLAG_DEVICE) {
317 out_be32(ioaddr->device_addr, tf->device);
318 VPRINTK("device 0x%X\n", tf->device);
319 }
320
321 ata_wait_idle(ap);
322}
323
324/**
325 * scc_check_status - Read device status reg & clear interrupt
326 * @ap: port where the device is
327 *
328 * Note: Original code is ata_check_status().
329 */
330
331static u8 scc_check_status (struct ata_port *ap)
332{
333 return in_be32(ap->ioaddr.status_addr);
334}
335
336/**
337 * scc_tf_read - input device's ATA taskfile shadow registers
338 * @ap: Port from which input is read
339 * @tf: ATA taskfile register set for storing input
340 *
Tejun Heo9363c382008-04-07 22:47:16 +0900341 * Note: Original code is ata_sff_tf_read().
Akira Iguchia619f981b2007-01-26 16:28:18 +0900342 */
343
344static void scc_tf_read (struct ata_port *ap, struct ata_taskfile *tf)
345{
346 struct ata_ioports *ioaddr = &ap->ioaddr;
347
348 tf->command = scc_check_status(ap);
349 tf->feature = in_be32(ioaddr->error_addr);
350 tf->nsect = in_be32(ioaddr->nsect_addr);
351 tf->lbal = in_be32(ioaddr->lbal_addr);
352 tf->lbam = in_be32(ioaddr->lbam_addr);
353 tf->lbah = in_be32(ioaddr->lbah_addr);
354 tf->device = in_be32(ioaddr->device_addr);
355
356 if (tf->flags & ATA_TFLAG_LBA48) {
357 out_be32(ioaddr->ctl_addr, tf->ctl | ATA_HOB);
358 tf->hob_feature = in_be32(ioaddr->error_addr);
359 tf->hob_nsect = in_be32(ioaddr->nsect_addr);
360 tf->hob_lbal = in_be32(ioaddr->lbal_addr);
361 tf->hob_lbam = in_be32(ioaddr->lbam_addr);
362 tf->hob_lbah = in_be32(ioaddr->lbah_addr);
Petr Vandrovecfe36cb52007-07-20 07:44:44 -0400363 out_be32(ioaddr->ctl_addr, tf->ctl);
364 ap->last_ctl = tf->ctl;
Akira Iguchia619f981b2007-01-26 16:28:18 +0900365 }
366}
367
368/**
369 * scc_exec_command - issue ATA command to host controller
370 * @ap: port to which command is being issued
371 * @tf: ATA taskfile register set
372 *
Tejun Heo9363c382008-04-07 22:47:16 +0900373 * Note: Original code is ata_sff_exec_command().
Akira Iguchia619f981b2007-01-26 16:28:18 +0900374 */
375
376static void scc_exec_command (struct ata_port *ap,
377 const struct ata_taskfile *tf)
378{
Tejun Heo878d4fe2007-02-21 16:36:33 +0900379 DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
Akira Iguchia619f981b2007-01-26 16:28:18 +0900380
381 out_be32(ap->ioaddr.command_addr, tf->command);
Tejun Heo9363c382008-04-07 22:47:16 +0900382 ata_sff_pause(ap);
Akira Iguchia619f981b2007-01-26 16:28:18 +0900383}
384
385/**
386 * scc_check_altstatus - Read device alternate status reg
387 * @ap: port where the device is
388 */
389
390static u8 scc_check_altstatus (struct ata_port *ap)
391{
392 return in_be32(ap->ioaddr.altstatus_addr);
393}
394
395/**
Tejun Heo9363c382008-04-07 22:47:16 +0900396 * scc_dev_select - Select device 0/1 on ATA bus
Akira Iguchia619f981b2007-01-26 16:28:18 +0900397 * @ap: ATA channel to manipulate
398 * @device: ATA device (numbered from zero) to select
399 *
Tejun Heo9363c382008-04-07 22:47:16 +0900400 * Note: Original code is ata_sff_dev_select().
Akira Iguchia619f981b2007-01-26 16:28:18 +0900401 */
402
Tejun Heo9363c382008-04-07 22:47:16 +0900403static void scc_dev_select (struct ata_port *ap, unsigned int device)
Akira Iguchia619f981b2007-01-26 16:28:18 +0900404{
405 u8 tmp;
406
407 if (device == 0)
408 tmp = ATA_DEVICE_OBS;
409 else
410 tmp = ATA_DEVICE_OBS | ATA_DEV1;
411
412 out_be32(ap->ioaddr.device_addr, tmp);
Tejun Heo9363c382008-04-07 22:47:16 +0900413 ata_sff_pause(ap);
Akira Iguchia619f981b2007-01-26 16:28:18 +0900414}
415
416/**
Sergei Shtylyov41dec292010-05-07 22:47:50 +0400417 * scc_set_devctl - Write device control reg
418 * @ap: port where the device is
419 * @ctl: value to write
420 */
421
422static void scc_set_devctl(struct ata_port *ap, u8 ctl)
423{
424 out_be32(ap->ioaddr.ctl_addr, ctl);
425}
426
427/**
Akira Iguchia619f981b2007-01-26 16:28:18 +0900428 * scc_bmdma_setup - Set up PCI IDE BMDMA transaction
429 * @qc: Info associated with this ATA transaction.
430 *
431 * Note: Original code is ata_bmdma_setup().
432 */
433
434static void scc_bmdma_setup (struct ata_queued_cmd *qc)
435{
436 struct ata_port *ap = qc->ap;
437 unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
438 u8 dmactl;
439 void __iomem *mmio = ap->ioaddr.bmdma_addr;
440
441 /* load PRD table addr */
Tejun Heof60d7012010-05-10 21:41:41 +0200442 out_be32(mmio + SCC_DMA_TABLE_OFS, ap->bmdma_prd_dma);
Akira Iguchia619f981b2007-01-26 16:28:18 +0900443
444 /* specify data direction, triple-check start bit is clear */
445 dmactl = in_be32(mmio + SCC_DMA_CMD);
446 dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
447 if (!rw)
448 dmactl |= ATA_DMA_WR;
449 out_be32(mmio + SCC_DMA_CMD, dmactl);
450
451 /* issue r/w command */
Tejun Heo5682ed32008-04-07 22:47:16 +0900452 ap->ops->sff_exec_command(ap, &qc->tf);
Akira Iguchia619f981b2007-01-26 16:28:18 +0900453}
454
455/**
456 * scc_bmdma_start - Start a PCI IDE BMDMA transaction
457 * @qc: Info associated with this ATA transaction.
458 *
459 * Note: Original code is ata_bmdma_start().
460 */
461
462static void scc_bmdma_start (struct ata_queued_cmd *qc)
463{
464 struct ata_port *ap = qc->ap;
465 u8 dmactl;
466 void __iomem *mmio = ap->ioaddr.bmdma_addr;
467
468 /* start host DMA transaction */
469 dmactl = in_be32(mmio + SCC_DMA_CMD);
470 out_be32(mmio + SCC_DMA_CMD, dmactl | ATA_DMA_START);
471}
472
473/**
474 * scc_devchk - PATA device presence detection
475 * @ap: ATA channel to examine
476 * @device: Device to examine (starting at zero)
477 *
478 * Note: Original code is ata_devchk().
479 */
480
481static unsigned int scc_devchk (struct ata_port *ap,
482 unsigned int device)
483{
484 struct ata_ioports *ioaddr = &ap->ioaddr;
485 u8 nsect, lbal;
486
Tejun Heo5682ed32008-04-07 22:47:16 +0900487 ap->ops->sff_dev_select(ap, device);
Akira Iguchia619f981b2007-01-26 16:28:18 +0900488
489 out_be32(ioaddr->nsect_addr, 0x55);
490 out_be32(ioaddr->lbal_addr, 0xaa);
491
492 out_be32(ioaddr->nsect_addr, 0xaa);
493 out_be32(ioaddr->lbal_addr, 0x55);
494
495 out_be32(ioaddr->nsect_addr, 0x55);
496 out_be32(ioaddr->lbal_addr, 0xaa);
497
498 nsect = in_be32(ioaddr->nsect_addr);
499 lbal = in_be32(ioaddr->lbal_addr);
500
501 if ((nsect == 0x55) && (lbal == 0xaa))
502 return 1; /* we found a device */
503
504 return 0; /* nothing found */
505}
506
507/**
Tejun Heo705e76b2008-04-07 22:47:19 +0900508 * scc_wait_after_reset - wait for devices to become ready after reset
Akira Iguchia619f981b2007-01-26 16:28:18 +0900509 *
Tejun Heo705e76b2008-04-07 22:47:19 +0900510 * Note: Original code is ata_sff_wait_after_reset
Akira Iguchia619f981b2007-01-26 16:28:18 +0900511 */
512
Sergei Shtylyovfe6005b2010-04-24 20:29:45 +0400513static int scc_wait_after_reset(struct ata_link *link, unsigned int devmask,
514 unsigned long deadline)
Akira Iguchia619f981b2007-01-26 16:28:18 +0900515{
Tejun Heo705e76b2008-04-07 22:47:19 +0900516 struct ata_port *ap = link->ap;
Akira Iguchia619f981b2007-01-26 16:28:18 +0900517 struct ata_ioports *ioaddr = &ap->ioaddr;
518 unsigned int dev0 = devmask & (1 << 0);
519 unsigned int dev1 = devmask & (1 << 1);
Tejun Heo705e76b2008-04-07 22:47:19 +0900520 int rc, ret = 0;
Akira Iguchia619f981b2007-01-26 16:28:18 +0900521
Tejun Heo705e76b2008-04-07 22:47:19 +0900522 /* Spec mandates ">= 2ms" before checking status. We wait
523 * 150ms, because that was the magic delay used for ATAPI
524 * devices in Hale Landis's ATADRVR, for the period of time
525 * between when the ATA command register is written, and then
526 * status is checked. Because waiting for "a while" before
527 * checking status is fine, post SRST, we perform this magic
528 * delay here as well.
529 *
530 * Old drivers/ide uses the 2mS rule and then waits for ready.
Akira Iguchia619f981b2007-01-26 16:28:18 +0900531 */
Tejun Heo97750ce2010-09-06 17:56:29 +0200532 ata_msleep(ap, 150);
Akira Iguchia619f981b2007-01-26 16:28:18 +0900533
Tejun Heo705e76b2008-04-07 22:47:19 +0900534 /* always check readiness of the master device */
535 rc = ata_sff_wait_ready(link, deadline);
536 /* -ENODEV means the odd clown forgot the D7 pulldown resistor
537 * and TF status is 0xff, bail out on it too.
Akira Iguchia619f981b2007-01-26 16:28:18 +0900538 */
Tejun Heo705e76b2008-04-07 22:47:19 +0900539 if (rc)
540 return rc;
541
542 /* if device 1 was found in ata_devchk, wait for register
543 * access briefly, then wait for BSY to clear.
544 */
545 if (dev1) {
546 int i;
Akira Iguchia619f981b2007-01-26 16:28:18 +0900547
Tejun Heo5682ed32008-04-07 22:47:16 +0900548 ap->ops->sff_dev_select(ap, 1);
Tejun Heo705e76b2008-04-07 22:47:19 +0900549
550 /* Wait for register access. Some ATAPI devices fail
551 * to set nsect/lbal after reset, so don't waste too
552 * much time on it. We're gonna wait for !BSY anyway.
553 */
554 for (i = 0; i < 2; i++) {
555 u8 nsect, lbal;
556
557 nsect = in_be32(ioaddr->nsect_addr);
558 lbal = in_be32(ioaddr->lbal_addr);
559 if ((nsect == 1) && (lbal == 1))
560 break;
Tejun Heo97750ce2010-09-06 17:56:29 +0200561 ata_msleep(ap, 50); /* give drive a breather */
Tejun Heo705e76b2008-04-07 22:47:19 +0900562 }
563
564 rc = ata_sff_wait_ready(link, deadline);
565 if (rc) {
566 if (rc != -ENODEV)
567 return rc;
568 ret = rc;
569 }
Tony Breeds7e068372007-05-23 14:26:43 -0700570 }
Akira Iguchia619f981b2007-01-26 16:28:18 +0900571
572 /* is all this really necessary? */
Tejun Heo5682ed32008-04-07 22:47:16 +0900573 ap->ops->sff_dev_select(ap, 0);
Akira Iguchia619f981b2007-01-26 16:28:18 +0900574 if (dev1)
Tejun Heo5682ed32008-04-07 22:47:16 +0900575 ap->ops->sff_dev_select(ap, 1);
Akira Iguchia619f981b2007-01-26 16:28:18 +0900576 if (dev0)
Tejun Heo5682ed32008-04-07 22:47:16 +0900577 ap->ops->sff_dev_select(ap, 0);
Tony Breeds7e068372007-05-23 14:26:43 -0700578
Tejun Heo705e76b2008-04-07 22:47:19 +0900579 return ret;
Akira Iguchia619f981b2007-01-26 16:28:18 +0900580}
581
582/**
583 * scc_bus_softreset - PATA device software reset
584 *
585 * Note: Original code is ata_bus_softreset().
586 */
587
Arjun Sreedharan4dc7c762014-08-17 20:00:09 +0530588static int scc_bus_softreset(struct ata_port *ap, unsigned int devmask,
Tony Breeds7e068372007-05-23 14:26:43 -0700589 unsigned long deadline)
Akira Iguchia619f981b2007-01-26 16:28:18 +0900590{
591 struct ata_ioports *ioaddr = &ap->ioaddr;
592
Tejun Heo878d4fe2007-02-21 16:36:33 +0900593 DPRINTK("ata%u: bus reset via SRST\n", ap->print_id);
Akira Iguchia619f981b2007-01-26 16:28:18 +0900594
595 /* software reset. causes dev0 to be selected */
596 out_be32(ioaddr->ctl_addr, ap->ctl);
597 udelay(20);
598 out_be32(ioaddr->ctl_addr, ap->ctl | ATA_SRST);
599 udelay(20);
600 out_be32(ioaddr->ctl_addr, ap->ctl);
601
Arjun Sreedharan4dc7c762014-08-17 20:00:09 +0530602 return scc_wait_after_reset(&ap->link, devmask, deadline);
Akira Iguchia619f981b2007-01-26 16:28:18 +0900603}
604
605/**
Tejun Heo9363c382008-04-07 22:47:16 +0900606 * scc_softreset - reset host port via ATA SRST
Akira Iguchia619f981b2007-01-26 16:28:18 +0900607 * @ap: port to reset
608 * @classes: resulting classes of attached devices
Tony Breeds7e068372007-05-23 14:26:43 -0700609 * @deadline: deadline jiffies for the operation
Akira Iguchia619f981b2007-01-26 16:28:18 +0900610 *
Tejun Heo9363c382008-04-07 22:47:16 +0900611 * Note: Original code is ata_sff_softreset().
Akira Iguchia619f981b2007-01-26 16:28:18 +0900612 */
613
Tejun Heo9363c382008-04-07 22:47:16 +0900614static int scc_softreset(struct ata_link *link, unsigned int *classes,
615 unsigned long deadline)
Akira Iguchia619f981b2007-01-26 16:28:18 +0900616{
Satyam Sharmab90fe232007-09-22 08:20:09 +0530617 struct ata_port *ap = link->ap;
Akira Iguchia619f981b2007-01-26 16:28:18 +0900618 unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
Arjun Sreedharan4dc7c762014-08-17 20:00:09 +0530619 unsigned int devmask = 0;
620 int rc;
Akira Iguchia619f981b2007-01-26 16:28:18 +0900621 u8 err;
622
623 DPRINTK("ENTER\n");
624
Akira Iguchia619f981b2007-01-26 16:28:18 +0900625 /* determine if device 0/1 are present */
626 if (scc_devchk(ap, 0))
627 devmask |= (1 << 0);
628 if (slave_possible && scc_devchk(ap, 1))
629 devmask |= (1 << 1);
630
631 /* select device 0 again */
Tejun Heo5682ed32008-04-07 22:47:16 +0900632 ap->ops->sff_dev_select(ap, 0);
Akira Iguchia619f981b2007-01-26 16:28:18 +0900633
634 /* issue bus reset */
635 DPRINTK("about to softreset, devmask=%x\n", devmask);
Arjun Sreedharan4dc7c762014-08-17 20:00:09 +0530636 rc = scc_bus_softreset(ap, devmask, deadline);
637 if (rc) {
638 ata_port_err(ap, "SRST failed (err_mask=0x%x)\n", rc);
Akira Iguchia619f981b2007-01-26 16:28:18 +0900639 return -EIO;
640 }
641
642 /* determine by signature whether we have ATA or ATAPI devices */
Tejun Heo9363c382008-04-07 22:47:16 +0900643 classes[0] = ata_sff_dev_classify(&ap->link.device[0],
Tejun Heo3f198592007-09-02 23:23:57 +0900644 devmask & (1 << 0), &err);
Akira Iguchia619f981b2007-01-26 16:28:18 +0900645 if (slave_possible && err != 0x81)
Tejun Heo9363c382008-04-07 22:47:16 +0900646 classes[1] = ata_sff_dev_classify(&ap->link.device[1],
Tejun Heo3f198592007-09-02 23:23:57 +0900647 devmask & (1 << 1), &err);
Akira Iguchia619f981b2007-01-26 16:28:18 +0900648
Akira Iguchia619f981b2007-01-26 16:28:18 +0900649 DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
650 return 0;
651}
652
653/**
654 * scc_bmdma_stop - Stop PCI IDE BMDMA transfer
655 * @qc: Command we are ending DMA for
656 */
657
658static void scc_bmdma_stop (struct ata_queued_cmd *qc)
659{
660 struct ata_port *ap = qc->ap;
661 void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR];
662 void __iomem *bmid_base = ap->host->iomap[SCC_BMID_BAR];
663 u32 reg;
664
665 while (1) {
666 reg = in_be32(bmid_base + SCC_DMA_INTST);
667
668 if (reg & INTSTS_SERROR) {
669 printk(KERN_WARNING "%s: SERROR\n", DRV_NAME);
670 out_be32(bmid_base + SCC_DMA_INTST, INTSTS_SERROR|INTSTS_BMSINT);
671 out_be32(bmid_base + SCC_DMA_CMD,
672 in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
673 continue;
674 }
675
676 if (reg & INTSTS_PRERR) {
677 u32 maea0, maec0;
678 maea0 = in_be32(ctrl_base + SCC_CTL_MAEA0);
679 maec0 = in_be32(ctrl_base + SCC_CTL_MAEC0);
680 printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", DRV_NAME, maea0, maec0);
681 out_be32(bmid_base + SCC_DMA_INTST, INTSTS_PRERR|INTSTS_BMSINT);
682 out_be32(bmid_base + SCC_DMA_CMD,
683 in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
684 continue;
685 }
686
687 if (reg & INTSTS_RERR) {
688 printk(KERN_WARNING "%s: Response Error\n", DRV_NAME);
689 out_be32(bmid_base + SCC_DMA_INTST, INTSTS_RERR|INTSTS_BMSINT);
690 out_be32(bmid_base + SCC_DMA_CMD,
691 in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
692 continue;
693 }
694
695 if (reg & INTSTS_ICERR) {
696 out_be32(bmid_base + SCC_DMA_CMD,
697 in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
698 printk(KERN_WARNING "%s: Illegal Configuration\n", DRV_NAME);
699 out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ICERR|INTSTS_BMSINT);
700 continue;
701 }
702
703 if (reg & INTSTS_BMSINT) {
704 unsigned int classes;
Tejun Heo341c2c92008-05-20 02:17:51 +0900705 unsigned long deadline = ata_deadline(jiffies, ATA_TMOUT_BOOT);
Akira Iguchia619f981b2007-01-26 16:28:18 +0900706 printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME);
707 out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT);
708 /* TBD: SW reset */
Tejun Heo9363c382008-04-07 22:47:16 +0900709 scc_softreset(&ap->link, &classes, deadline);
Akira Iguchia619f981b2007-01-26 16:28:18 +0900710 continue;
711 }
712
713 if (reg & INTSTS_BMHE) {
714 out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMHE);
715 continue;
716 }
717
718 if (reg & INTSTS_ACTEINT) {
719 out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ACTEINT);
720 continue;
721 }
722
723 if (reg & INTSTS_IOIRQS) {
724 out_be32(bmid_base + SCC_DMA_INTST, INTSTS_IOIRQS);
725 continue;
726 }
727 break;
728 }
729
730 /* clear start/stop bit */
731 out_be32(bmid_base + SCC_DMA_CMD,
732 in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
733
734 /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
Alan Coxa57c1ba2008-05-29 22:10:58 +0100735 ata_sff_dma_pause(ap); /* dummy read */
Akira Iguchia619f981b2007-01-26 16:28:18 +0900736}
737
738/**
739 * scc_bmdma_status - Read PCI IDE BMDMA status
740 * @ap: Port associated with this ATA transaction.
741 */
742
743static u8 scc_bmdma_status (struct ata_port *ap)
744{
Akira Iguchia619f981b2007-01-26 16:28:18 +0900745 void __iomem *mmio = ap->ioaddr.bmdma_addr;
Akira Iguchifae57d32007-07-10 18:29:34 +0900746 u8 host_stat = in_be32(mmio + SCC_DMA_STATUS);
747 u32 int_status = in_be32(mmio + SCC_DMA_INTST);
Satyam Sharmab90fe232007-09-22 08:20:09 +0530748 struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag);
Akira Iguchifae57d32007-07-10 18:29:34 +0900749 static int retry = 0;
Akira Iguchia619f981b2007-01-26 16:28:18 +0900750
Akira Iguchifae57d32007-07-10 18:29:34 +0900751 /* return if IOS_SS is cleared */
752 if (!(in_be32(mmio + SCC_DMA_CMD) & ATA_DMA_START))
753 return host_stat;
Akira Iguchia619f981b2007-01-26 16:28:18 +0900754
Akira Iguchifae57d32007-07-10 18:29:34 +0900755 /* errata A252,A308 workaround: Step4 */
Alan Coxa57c1ba2008-05-29 22:10:58 +0100756 if ((scc_check_altstatus(ap) & ATA_ERR)
757 && (int_status & INTSTS_INTRQ))
Akira Iguchifae57d32007-07-10 18:29:34 +0900758 return (host_stat | ATA_DMA_INTR);
759
760 /* errata A308 workaround Step5 */
761 if (int_status & INTSTS_IOIRQS) {
762 host_stat |= ATA_DMA_INTR;
763
764 /* We don't check ATAPI DMA because it is limited to UDMA4 */
765 if ((qc->tf.protocol == ATA_PROT_DMA &&
766 qc->dev->xfer_mode > XFER_UDMA_4)) {
767 if (!(int_status & INTSTS_ACTEINT)) {
Akira Iguchidcd03442007-07-17 12:10:17 +0900768 printk(KERN_WARNING "ata%u: operation failed (transfer data loss)\n",
769 ap->print_id);
Akira Iguchifae57d32007-07-10 18:29:34 +0900770 host_stat |= ATA_DMA_ERR;
771 if (retry++)
Akira Iguchidcd03442007-07-17 12:10:17 +0900772 ap->udma_mask &= ~(1 << qc->dev->xfer_mode);
Akira Iguchifae57d32007-07-10 18:29:34 +0900773 } else
774 retry = 0;
775 }
Akira Iguchia619f981b2007-01-26 16:28:18 +0900776 }
777
778 return host_stat;
779}
780
781/**
782 * scc_data_xfer - Transfer data by PIO
Tejun Heo55dba312007-12-05 16:43:07 +0900783 * @dev: device for this I/O
Akira Iguchia619f981b2007-01-26 16:28:18 +0900784 * @buf: data buffer
785 * @buflen: buffer length
Tejun Heo55dba312007-12-05 16:43:07 +0900786 * @rw: read/write
Akira Iguchia619f981b2007-01-26 16:28:18 +0900787 *
Tejun Heo9363c382008-04-07 22:47:16 +0900788 * Note: Original code is ata_sff_data_xfer().
Akira Iguchia619f981b2007-01-26 16:28:18 +0900789 */
790
Tejun Heo55dba312007-12-05 16:43:07 +0900791static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf,
792 unsigned int buflen, int rw)
Akira Iguchia619f981b2007-01-26 16:28:18 +0900793{
Tejun Heo55dba312007-12-05 16:43:07 +0900794 struct ata_port *ap = dev->link->ap;
Akira Iguchia619f981b2007-01-26 16:28:18 +0900795 unsigned int words = buflen >> 1;
796 unsigned int i;
Al Viro826cd152008-03-25 05:18:11 +0000797 __le16 *buf16 = (__le16 *) buf;
Akira Iguchia619f981b2007-01-26 16:28:18 +0900798 void __iomem *mmio = ap->ioaddr.data_addr;
799
800 /* Transfer multiple of 2 bytes */
Tejun Heo55dba312007-12-05 16:43:07 +0900801 if (rw == READ)
Akira Iguchia619f981b2007-01-26 16:28:18 +0900802 for (i = 0; i < words; i++)
Al Viro826cd152008-03-25 05:18:11 +0000803 buf16[i] = cpu_to_le16(in_be32(mmio));
Tejun Heo55dba312007-12-05 16:43:07 +0900804 else
805 for (i = 0; i < words; i++)
Al Viro826cd152008-03-25 05:18:11 +0000806 out_be32(mmio, le16_to_cpu(buf16[i]));
Akira Iguchia619f981b2007-01-26 16:28:18 +0900807
808 /* Transfer trailing 1 byte, if any. */
809 if (unlikely(buflen & 0x01)) {
Al Viro826cd152008-03-25 05:18:11 +0000810 __le16 align_buf[1] = { 0 };
Akira Iguchia619f981b2007-01-26 16:28:18 +0900811 unsigned char *trailing_buf = buf + buflen - 1;
812
Tejun Heo55dba312007-12-05 16:43:07 +0900813 if (rw == READ) {
Al Viro826cd152008-03-25 05:18:11 +0000814 align_buf[0] = cpu_to_le16(in_be32(mmio));
Akira Iguchia619f981b2007-01-26 16:28:18 +0900815 memcpy(trailing_buf, align_buf, 1);
Tejun Heo55dba312007-12-05 16:43:07 +0900816 } else {
817 memcpy(align_buf, trailing_buf, 1);
Al Viro826cd152008-03-25 05:18:11 +0000818 out_be32(mmio, le16_to_cpu(align_buf[0]));
Akira Iguchia619f981b2007-01-26 16:28:18 +0900819 }
Tejun Heo55dba312007-12-05 16:43:07 +0900820 words++;
Akira Iguchia619f981b2007-01-26 16:28:18 +0900821 }
Tejun Heo55dba312007-12-05 16:43:07 +0900822
823 return words << 1;
Akira Iguchia619f981b2007-01-26 16:28:18 +0900824}
825
826/**
Tejun Heo9363c382008-04-07 22:47:16 +0900827 * scc_postreset - standard postreset callback
Akira Iguchia619f981b2007-01-26 16:28:18 +0900828 * @ap: the target ata_port
829 * @classes: classes of attached devices
830 *
Tejun Heo9363c382008-04-07 22:47:16 +0900831 * Note: Original code is ata_sff_postreset().
Akira Iguchia619f981b2007-01-26 16:28:18 +0900832 */
833
Tejun Heo9363c382008-04-07 22:47:16 +0900834static void scc_postreset(struct ata_link *link, unsigned int *classes)
Akira Iguchia619f981b2007-01-26 16:28:18 +0900835{
Satyam Sharmab90fe232007-09-22 08:20:09 +0530836 struct ata_port *ap = link->ap;
837
Akira Iguchia619f981b2007-01-26 16:28:18 +0900838 DPRINTK("ENTER\n");
839
Akira Iguchia619f981b2007-01-26 16:28:18 +0900840 /* is double-select really necessary? */
841 if (classes[0] != ATA_DEV_NONE)
Tejun Heo5682ed32008-04-07 22:47:16 +0900842 ap->ops->sff_dev_select(ap, 1);
Akira Iguchia619f981b2007-01-26 16:28:18 +0900843 if (classes[1] != ATA_DEV_NONE)
Tejun Heo5682ed32008-04-07 22:47:16 +0900844 ap->ops->sff_dev_select(ap, 0);
Akira Iguchia619f981b2007-01-26 16:28:18 +0900845
846 /* bail out if no device is present */
847 if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
848 DPRINTK("EXIT, no device\n");
849 return;
850 }
851
852 /* set up device control */
Sergei Shtylyovec86c812010-04-24 20:29:58 +0400853 out_be32(ap->ioaddr.ctl_addr, ap->ctl);
Akira Iguchia619f981b2007-01-26 16:28:18 +0900854
855 DPRINTK("EXIT\n");
856}
857
858/**
Tejun Heo9363c382008-04-07 22:47:16 +0900859 * scc_irq_clear - Clear PCI IDE BMDMA interrupt.
Akira Iguchia619f981b2007-01-26 16:28:18 +0900860 * @ap: Port associated with this ATA transaction.
861 *
Tejun Heo37f65b82010-05-19 22:10:20 +0200862 * Note: Original code is ata_bmdma_irq_clear().
Akira Iguchia619f981b2007-01-26 16:28:18 +0900863 */
864
Tejun Heo9363c382008-04-07 22:47:16 +0900865static void scc_irq_clear (struct ata_port *ap)
Akira Iguchia619f981b2007-01-26 16:28:18 +0900866{
867 void __iomem *mmio = ap->ioaddr.bmdma_addr;
868
869 if (!mmio)
870 return;
871
872 out_be32(mmio + SCC_DMA_STATUS, in_be32(mmio + SCC_DMA_STATUS));
873}
874
875/**
876 * scc_port_start - Set port up for dma.
877 * @ap: Port to initialize
878 *
Tejun Heoc7087652010-05-10 21:41:34 +0200879 * Allocate space for PRD table using ata_bmdma_port_start().
Akira Iguchia619f981b2007-01-26 16:28:18 +0900880 * Set PRD table address for PTERADD. (PRD Transfer End Read)
881 */
882
883static int scc_port_start (struct ata_port *ap)
884{
885 void __iomem *mmio = ap->ioaddr.bmdma_addr;
886 int rc;
887
Tejun Heoc7087652010-05-10 21:41:34 +0200888 rc = ata_bmdma_port_start(ap);
Akira Iguchia619f981b2007-01-26 16:28:18 +0900889 if (rc)
890 return rc;
891
Tejun Heof60d7012010-05-10 21:41:41 +0200892 out_be32(mmio + SCC_DMA_PTERADD, ap->bmdma_prd_dma);
Akira Iguchia619f981b2007-01-26 16:28:18 +0900893 return 0;
894}
895
896/**
897 * scc_port_stop - Undo scc_port_start()
898 * @ap: Port to shut down
899 *
900 * Reset PTERADD.
901 */
902
903static void scc_port_stop (struct ata_port *ap)
904{
905 void __iomem *mmio = ap->ioaddr.bmdma_addr;
906
907 out_be32(mmio + SCC_DMA_PTERADD, 0);
908}
909
910static struct scsi_host_template scc_sht = {
Tejun Heo68d1d072008-03-25 12:22:49 +0900911 ATA_BMDMA_SHT(DRV_NAME),
Akira Iguchia619f981b2007-01-26 16:28:18 +0900912};
913
Tejun Heoc1796d92008-03-27 19:44:24 +0900914static struct ata_port_operations scc_pata_ops = {
Tejun Heo029cfd62008-03-25 12:22:49 +0900915 .inherits = &ata_bmdma_port_ops,
916
Akira Iguchia619f981b2007-01-26 16:28:18 +0900917 .set_piomode = scc_set_piomode,
918 .set_dmamode = scc_set_dmamode,
Akira Iguchidcd03442007-07-17 12:10:17 +0900919 .mode_filter = scc_mode_filter,
Akira Iguchia619f981b2007-01-26 16:28:18 +0900920
Tejun Heo5682ed32008-04-07 22:47:16 +0900921 .sff_tf_load = scc_tf_load,
922 .sff_tf_read = scc_tf_read,
923 .sff_exec_command = scc_exec_command,
924 .sff_check_status = scc_check_status,
925 .sff_check_altstatus = scc_check_altstatus,
926 .sff_dev_select = scc_dev_select,
Sergei Shtylyov41dec292010-05-07 22:47:50 +0400927 .sff_set_devctl = scc_set_devctl,
Akira Iguchia619f981b2007-01-26 16:28:18 +0900928
929 .bmdma_setup = scc_bmdma_setup,
930 .bmdma_start = scc_bmdma_start,
931 .bmdma_stop = scc_bmdma_stop,
932 .bmdma_status = scc_bmdma_status,
Tejun Heo5682ed32008-04-07 22:47:16 +0900933 .sff_data_xfer = scc_data_xfer,
Akira Iguchia619f981b2007-01-26 16:28:18 +0900934
Bartlomiej Zolnierkiewicz9f8abf82011-10-12 17:16:37 +0200935 .cable_detect = ata_cable_80wire,
Tejun Heo9363c382008-04-07 22:47:16 +0900936 .softreset = scc_softreset,
937 .postreset = scc_postreset,
Akira Iguchia619f981b2007-01-26 16:28:18 +0900938
Tejun Heo5682ed32008-04-07 22:47:16 +0900939 .sff_irq_clear = scc_irq_clear,
Akira Iguchia619f981b2007-01-26 16:28:18 +0900940
941 .port_start = scc_port_start,
942 .port_stop = scc_port_stop,
943};
944
945static struct ata_port_info scc_port_info[] = {
946 {
Sergei Shtylyov9cbe0562011-02-04 22:05:48 +0300947 .flags = ATA_FLAG_SLAVE_POSS,
Erik Inge Bolsø14bdef92009-03-14 21:38:24 +0100948 .pio_mask = ATA_PIO4,
949 /* No MWDMA */
Akira Iguchia619f981b2007-01-26 16:28:18 +0900950 .udma_mask = ATA_UDMA6,
951 .port_ops = &scc_pata_ops,
952 },
953};
954
955/**
956 * scc_reset_controller - initialize SCC PATA controller.
957 */
958
Tejun Heo5d728822007-04-17 23:44:08 +0900959static int scc_reset_controller(struct ata_host *host)
Akira Iguchia619f981b2007-01-26 16:28:18 +0900960{
Tejun Heo5d728822007-04-17 23:44:08 +0900961 void __iomem *ctrl_base = host->iomap[SCC_CTRL_BAR];
962 void __iomem *bmid_base = host->iomap[SCC_BMID_BAR];
Akira Iguchia619f981b2007-01-26 16:28:18 +0900963 void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL;
964 void __iomem *mode_port = ctrl_base + SCC_CTL_MODEREG;
965 void __iomem *ecmode_port = ctrl_base + SCC_CTL_ECMODE;
966 void __iomem *intmask_port = bmid_base + SCC_DMA_INTMASK;
967 void __iomem *dmastatus_port = bmid_base + SCC_DMA_STATUS;
968 u32 reg = 0;
969
970 out_be32(cckctrl_port, reg);
971 reg |= CCKCTRL_ATACLKOEN;
972 out_be32(cckctrl_port, reg);
973 reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN;
974 out_be32(cckctrl_port, reg);
975 reg |= CCKCTRL_CRST;
976 out_be32(cckctrl_port, reg);
977
978 for (;;) {
979 reg = in_be32(cckctrl_port);
980 if (reg & CCKCTRL_CRST)
981 break;
982 udelay(5000);
983 }
984
985 reg |= CCKCTRL_ATARESET;
986 out_be32(cckctrl_port, reg);
987 out_be32(ecmode_port, ECMODE_VALUE);
988 out_be32(mode_port, MODE_JCUSFEN);
989 out_be32(intmask_port, INTMASK_MSK);
990
991 if (in_be32(dmastatus_port) & QCHSD_STPDIAG) {
992 printk(KERN_WARNING "%s: failed to detect 80c cable. (PDIAG# is high)\n", DRV_NAME);
993 return -EIO;
994 }
995
996 return 0;
997}
998
999/**
1000 * scc_setup_ports - initialize ioaddr with SCC PATA port offsets.
1001 * @ioaddr: IO address structure to be initialized
1002 * @base: base address of BMID region
1003 */
1004
1005static void scc_setup_ports (struct ata_ioports *ioaddr, void __iomem *base)
1006{
1007 ioaddr->cmd_addr = base + SCC_REG_CMD_ADDR;
1008 ioaddr->altstatus_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS;
1009 ioaddr->ctl_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS;
1010 ioaddr->bmdma_addr = base;
1011 ioaddr->data_addr = ioaddr->cmd_addr + SCC_REG_DATA;
1012 ioaddr->error_addr = ioaddr->cmd_addr + SCC_REG_ERR;
1013 ioaddr->feature_addr = ioaddr->cmd_addr + SCC_REG_FEATURE;
1014 ioaddr->nsect_addr = ioaddr->cmd_addr + SCC_REG_NSECT;
1015 ioaddr->lbal_addr = ioaddr->cmd_addr + SCC_REG_LBAL;
1016 ioaddr->lbam_addr = ioaddr->cmd_addr + SCC_REG_LBAM;
1017 ioaddr->lbah_addr = ioaddr->cmd_addr + SCC_REG_LBAH;
1018 ioaddr->device_addr = ioaddr->cmd_addr + SCC_REG_DEVICE;
1019 ioaddr->status_addr = ioaddr->cmd_addr + SCC_REG_STATUS;
1020 ioaddr->command_addr = ioaddr->cmd_addr + SCC_REG_CMD;
1021}
1022
Tejun Heo5d728822007-04-17 23:44:08 +09001023static int scc_host_init(struct ata_host *host)
Akira Iguchia619f981b2007-01-26 16:28:18 +09001024{
Tejun Heo5d728822007-04-17 23:44:08 +09001025 struct pci_dev *pdev = to_pci_dev(host->dev);
Akira Iguchia619f981b2007-01-26 16:28:18 +09001026 int rc;
1027
Tejun Heo5d728822007-04-17 23:44:08 +09001028 rc = scc_reset_controller(host);
Akira Iguchia619f981b2007-01-26 16:28:18 +09001029 if (rc)
1030 return rc;
1031
Quentin Lambertc54c7192015-04-08 14:34:10 +02001032 rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
Akira Iguchia619f981b2007-01-26 16:28:18 +09001033 if (rc)
1034 return rc;
Quentin Lambertc54c7192015-04-08 14:34:10 +02001035 rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
Akira Iguchia619f981b2007-01-26 16:28:18 +09001036 if (rc)
1037 return rc;
1038
Tejun Heo5d728822007-04-17 23:44:08 +09001039 scc_setup_ports(&host->ports[0]->ioaddr, host->iomap[SCC_BMID_BAR]);
Akira Iguchia619f981b2007-01-26 16:28:18 +09001040
1041 pci_set_master(pdev);
1042
1043 return 0;
1044}
1045
1046/**
1047 * scc_init_one - Register SCC PATA device with kernel services
1048 * @pdev: PCI device to register
1049 * @ent: Entry in scc_pci_tbl matching with @pdev
1050 *
1051 * LOCKING:
1052 * Inherited from PCI layer (may sleep).
1053 *
1054 * RETURNS:
1055 * Zero on success, or -ERRNO value.
1056 */
1057
1058static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
1059{
Akira Iguchia619f981b2007-01-26 16:28:18 +09001060 unsigned int board_idx = (unsigned int) ent->driver_data;
Tejun Heo5d728822007-04-17 23:44:08 +09001061 const struct ata_port_info *ppi[] = { &scc_port_info[board_idx], NULL };
Alexey Dobriyan0397bad2007-05-03 23:44:59 +04001062 struct ata_host *host;
Akira Iguchia619f981b2007-01-26 16:28:18 +09001063 int rc;
1064
Joe Perches06296a12011-04-15 15:52:00 -07001065 ata_print_version_once(&pdev->dev, DRV_VERSION);
Akira Iguchia619f981b2007-01-26 16:28:18 +09001066
Alexey Dobriyan0397bad2007-05-03 23:44:59 +04001067 host = ata_host_alloc_pinfo(&pdev->dev, ppi, 1);
Tejun Heo5d728822007-04-17 23:44:08 +09001068 if (!host)
1069 return -ENOMEM;
1070
Akira Iguchia619f981b2007-01-26 16:28:18 +09001071 rc = pcim_enable_device(pdev);
1072 if (rc)
1073 return rc;
1074
1075 rc = pcim_iomap_regions(pdev, (1 << SCC_CTRL_BAR) | (1 << SCC_BMID_BAR), DRV_NAME);
1076 if (rc == -EBUSY)
1077 pcim_pin_device(pdev);
1078 if (rc)
1079 return rc;
Tejun Heo5d728822007-04-17 23:44:08 +09001080 host->iomap = pcim_iomap_table(pdev);
Akira Iguchia619f981b2007-01-26 16:28:18 +09001081
Tejun Heocbcdd872007-08-18 13:14:55 +09001082 ata_port_pbar_desc(host->ports[0], SCC_CTRL_BAR, -1, "ctrl");
1083 ata_port_pbar_desc(host->ports[0], SCC_BMID_BAR, -1, "bmid");
1084
Tejun Heo5d728822007-04-17 23:44:08 +09001085 rc = scc_host_init(host);
Akira Iguchia619f981b2007-01-26 16:28:18 +09001086 if (rc)
1087 return rc;
1088
Tejun Heoc3b28892010-05-19 22:10:21 +02001089 return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
Tejun Heo9363c382008-04-07 22:47:16 +09001090 IRQF_SHARED, &scc_sht);
Akira Iguchia619f981b2007-01-26 16:28:18 +09001091}
1092
1093static struct pci_driver scc_pci_driver = {
1094 .name = DRV_NAME,
1095 .id_table = scc_pci_tbl,
1096 .probe = scc_init_one,
1097 .remove = ata_pci_remove_one,
Bartlomiej Zolnierkiewicz58eb8cd2014-05-07 17:17:44 +02001098#ifdef CONFIG_PM_SLEEP
Akira Iguchia619f981b2007-01-26 16:28:18 +09001099 .suspend = ata_pci_device_suspend,
1100 .resume = ata_pci_device_resume,
1101#endif
1102};
1103
Axel Lin2fc75da2012-04-19 13:43:05 +08001104module_pci_driver(scc_pci_driver);
Akira Iguchia619f981b2007-01-26 16:28:18 +09001105
1106MODULE_AUTHOR("Toshiba corp");
1107MODULE_DESCRIPTION("SCSI low-level driver for Toshiba SCC PATA controller");
1108MODULE_LICENSE("GPL");
1109MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
1110MODULE_VERSION(DRV_VERSION);