blob: 4ce7438608ecb68a374146276eff3308da099589 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* -*- mode: c; c-basic-offset: 8 -*- */
2
3/* NCR (or Symbios) 53c700 and 53c700-66 Driver
4 *
5 * Copyright (C) 2001 by James.Bottomley@HansenPartnership.com
6**-----------------------------------------------------------------------------
7**
8** This program is free software; you can redistribute it and/or modify
9** it under the terms of the GNU General Public License as published by
10** the Free Software Foundation; either version 2 of the License, or
11** (at your option) any later version.
12**
13** This program is distributed in the hope that it will be useful,
14** but WITHOUT ANY WARRANTY; without even the implied warranty of
15** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16** GNU General Public License for more details.
17**
18** You should have received a copy of the GNU General Public License
19** along with this program; if not, write to the Free Software
20** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21**
22**-----------------------------------------------------------------------------
23 */
24
25/* Notes:
26 *
27 * This driver is designed exclusively for these chips (virtually the
28 * earliest of the scripts engine chips). They need their own drivers
29 * because they are missing so many of the scripts and snazzy register
30 * features of their elder brothers (the 710, 720 and 770).
31 *
32 * The 700 is the lowliest of the line, it can only do async SCSI.
33 * The 700-66 can at least do synchronous SCSI up to 10MHz.
34 *
35 * The 700 chip has no host bus interface logic of its own. However,
36 * it is usually mapped to a location with well defined register
37 * offsets. Therefore, if you can determine the base address and the
38 * irq your board incorporating this chip uses, you can probably use
39 * this driver to run it (although you'll probably have to write a
40 * minimal wrapper for the purpose---see the NCR_D700 driver for
41 * details about how to do this).
42 *
43 *
44 * TODO List:
45 *
46 * 1. Better statistics in the proc fs
47 *
48 * 2. Implement message queue (queues SCSI messages like commands) and make
49 * the abort and device reset functions use them.
50 * */
51
52/* CHANGELOG
53 *
54 * Version 2.8
55 *
56 * Fixed bad bug affecting tag starvation processing (previously the
57 * driver would hang the system if too many tags starved. Also fixed
58 * bad bug having to do with 10 byte command processing and REQUEST
59 * SENSE (the command would loop forever getting a transfer length
60 * mismatch in the CMD phase).
61 *
62 * Version 2.7
63 *
64 * Fixed scripts problem which caused certain devices (notably CDRWs)
65 * to hang on initial INQUIRY. Updated NCR_700_readl/writel to use
66 * __raw_readl/writel for parisc compatibility (Thomas
67 * Bogendoerfer). Added missing SCp->request_bufflen initialisation
68 * for sense requests (Ryan Bradetich).
69 *
70 * Version 2.6
71 *
72 * Following test of the 64 bit parisc kernel by Richard Hirst,
73 * several problems have now been corrected. Also adds support for
74 * consistent memory allocation.
75 *
76 * Version 2.5
77 *
78 * More Compatibility changes for 710 (now actually works). Enhanced
79 * support for odd clock speeds which constrain SDTR negotiations.
80 * correct cacheline separation for scsi messages and status for
81 * incoherent architectures. Use of the pci mapping functions on
82 * buffers to begin support for 64 bit drivers.
83 *
84 * Version 2.4
85 *
86 * Added support for the 53c710 chip (in 53c700 emulation mode only---no
87 * special 53c710 instructions or registers are used).
88 *
89 * Version 2.3
90 *
91 * More endianness/cache coherency changes.
92 *
93 * Better bad device handling (handles devices lying about tag
94 * queueing support and devices which fail to provide sense data on
95 * contingent allegiance conditions)
96 *
97 * Many thanks to Richard Hirst <rhirst@linuxcare.com> for patiently
98 * debugging this driver on the parisc architecture and suggesting
99 * many improvements and bug fixes.
100 *
101 * Thanks also go to Linuxcare Inc. for providing several PARISC
102 * machines for me to debug the driver on.
103 *
104 * Version 2.2
105 *
106 * Made the driver mem or io mapped; added endian invariance; added
107 * dma cache flushing operations for architectures which need it;
108 * added support for more varied clocking speeds.
109 *
110 * Version 2.1
111 *
112 * Initial modularisation from the D700. See NCR_D700.c for the rest of
113 * the changelog.
114 * */
115#define NCR_700_VERSION "2.8"
116
117#include <linux/config.h>
118#include <linux/kernel.h>
119#include <linux/types.h>
120#include <linux/string.h>
121#include <linux/ioport.h>
122#include <linux/delay.h>
123#include <linux/spinlock.h>
124#include <linux/completion.h>
125#include <linux/sched.h>
126#include <linux/init.h>
127#include <linux/proc_fs.h>
128#include <linux/blkdev.h>
129#include <linux/module.h>
130#include <linux/interrupt.h>
Jeff Garzik017560f2005-10-24 18:04:36 -0400131#include <linux/device.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700132#include <asm/dma.h>
133#include <asm/system.h>
134#include <asm/io.h>
135#include <asm/pgtable.h>
136#include <asm/byteorder.h>
137
138#include <scsi/scsi.h>
139#include <scsi/scsi_cmnd.h>
140#include <scsi/scsi_dbg.h>
141#include <scsi/scsi_eh.h>
142#include <scsi/scsi_host.h>
143#include <scsi/scsi_tcq.h>
144#include <scsi/scsi_transport.h>
145#include <scsi/scsi_transport_spi.h>
146
147#include "53c700.h"
148
149/* NOTE: For 64 bit drivers there are points in the code where we use
150 * a non dereferenceable pointer to point to a structure in dma-able
151 * memory (which is 32 bits) so that we can use all of the structure
152 * operations but take the address at the end. This macro allows us
153 * to truncate the 64 bit pointer down to 32 bits without the compiler
154 * complaining */
155#define to32bit(x) ((__u32)((unsigned long)(x)))
156
157#ifdef NCR_700_DEBUG
158#define STATIC
159#else
160#define STATIC static
161#endif
162
163MODULE_AUTHOR("James Bottomley");
164MODULE_DESCRIPTION("53c700 and 53c700-66 Driver");
165MODULE_LICENSE("GPL");
166
167/* This is the script */
168#include "53c700_d.h"
169
170
171STATIC int NCR_700_queuecommand(struct scsi_cmnd *, void (*done)(struct scsi_cmnd *));
172STATIC int NCR_700_abort(struct scsi_cmnd * SCpnt);
173STATIC int NCR_700_bus_reset(struct scsi_cmnd * SCpnt);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700174STATIC int NCR_700_host_reset(struct scsi_cmnd * SCpnt);
175STATIC void NCR_700_chip_setup(struct Scsi_Host *host);
176STATIC void NCR_700_chip_reset(struct Scsi_Host *host);
177STATIC int NCR_700_slave_configure(struct scsi_device *SDpnt);
178STATIC void NCR_700_slave_destroy(struct scsi_device *SDpnt);
179static int NCR_700_change_queue_depth(struct scsi_device *SDpnt, int depth);
180static int NCR_700_change_queue_type(struct scsi_device *SDpnt, int depth);
181
182STATIC struct device_attribute *NCR_700_dev_attrs[];
183
184STATIC struct scsi_transport_template *NCR_700_transport_template = NULL;
185
186static char *NCR_700_phase[] = {
187 "",
188 "after selection",
189 "before command phase",
190 "after command phase",
191 "after status phase",
192 "after data in phase",
193 "after data out phase",
194 "during data phase",
195};
196
197static char *NCR_700_condition[] = {
198 "",
199 "NOT MSG_OUT",
200 "UNEXPECTED PHASE",
201 "NOT MSG_IN",
202 "UNEXPECTED MSG",
203 "MSG_IN",
204 "SDTR_MSG RECEIVED",
205 "REJECT_MSG RECEIVED",
206 "DISCONNECT_MSG RECEIVED",
207 "MSG_OUT",
208 "DATA_IN",
209
210};
211
212static char *NCR_700_fatal_messages[] = {
213 "unexpected message after reselection",
214 "still MSG_OUT after message injection",
215 "not MSG_IN after selection",
216 "Illegal message length received",
217};
218
219static char *NCR_700_SBCL_bits[] = {
220 "IO ",
221 "CD ",
222 "MSG ",
223 "ATN ",
224 "SEL ",
225 "BSY ",
226 "ACK ",
227 "REQ ",
228};
229
230static char *NCR_700_SBCL_to_phase[] = {
231 "DATA_OUT",
232 "DATA_IN",
233 "CMD_OUT",
234 "STATE",
235 "ILLEGAL PHASE",
236 "ILLEGAL PHASE",
237 "MSG OUT",
238 "MSG IN",
239};
240
241static __u8 NCR_700_SDTR_msg[] = {
242 0x01, /* Extended message */
243 0x03, /* Extended message Length */
244 0x01, /* SDTR Extended message */
245 NCR_700_MIN_PERIOD,
246 NCR_700_MAX_OFFSET
247};
248
249/* This translates the SDTR message offset and period to a value
250 * which can be loaded into the SXFER_REG.
251 *
252 * NOTE: According to SCSI-2, the true transfer period (in ns) is
253 * actually four times this period value */
254static inline __u8
255NCR_700_offset_period_to_sxfer(struct NCR_700_Host_Parameters *hostdata,
256 __u8 offset, __u8 period)
257{
258 int XFERP;
259
260 __u8 min_xferp = (hostdata->chip710
261 ? NCR_710_MIN_XFERP : NCR_700_MIN_XFERP);
262 __u8 max_offset = (hostdata->chip710
263 ? NCR_710_MAX_OFFSET : NCR_700_MAX_OFFSET);
264
265 if(offset == 0)
266 return 0;
267
268 if(period < hostdata->min_period) {
269 printk(KERN_WARNING "53c700: Period %dns is less than this chip's minimum, setting to %d\n", period*4, NCR_700_SDTR_msg[3]*4);
270 period = hostdata->min_period;
271 }
272 XFERP = (period*4 * hostdata->sync_clock)/1000 - 4;
273 if(offset > max_offset) {
274 printk(KERN_WARNING "53c700: Offset %d exceeds chip maximum, setting to %d\n",
275 offset, max_offset);
276 offset = max_offset;
277 }
278 if(XFERP < min_xferp) {
279 printk(KERN_WARNING "53c700: XFERP %d is less than minium, setting to %d\n",
280 XFERP, min_xferp);
281 XFERP = min_xferp;
282 }
283 return (offset & 0x0f) | (XFERP & 0x07)<<4;
284}
285
286static inline __u8
287NCR_700_get_SXFER(struct scsi_device *SDp)
288{
289 struct NCR_700_Host_Parameters *hostdata =
290 (struct NCR_700_Host_Parameters *)SDp->host->hostdata[0];
291
292 return NCR_700_offset_period_to_sxfer(hostdata,
293 spi_offset(SDp->sdev_target),
294 spi_period(SDp->sdev_target));
295}
296
297struct Scsi_Host *
298NCR_700_detect(struct scsi_host_template *tpnt,
299 struct NCR_700_Host_Parameters *hostdata, struct device *dev)
300{
301 dma_addr_t pScript, pSlots;
302 __u8 *memory;
303 __u32 *script;
304 struct Scsi_Host *host;
305 static int banner = 0;
306 int j;
307
308 if(tpnt->sdev_attrs == NULL)
309 tpnt->sdev_attrs = NCR_700_dev_attrs;
310
311 memory = dma_alloc_noncoherent(hostdata->dev, TOTAL_MEM_SIZE,
312 &pScript, GFP_KERNEL);
313 if(memory == NULL) {
314 printk(KERN_ERR "53c700: Failed to allocate memory for driver, detatching\n");
315 return NULL;
316 }
317
318 script = (__u32 *)memory;
319 hostdata->msgin = memory + MSGIN_OFFSET;
320 hostdata->msgout = memory + MSGOUT_OFFSET;
321 hostdata->status = memory + STATUS_OFFSET;
322 /* all of these offsets are L1_CACHE_BYTES separated. It is fatal
323 * if this isn't sufficient separation to avoid dma flushing issues */
324 BUG_ON(!dma_is_consistent(pScript) && L1_CACHE_BYTES < dma_get_cache_alignment());
325 hostdata->slots = (struct NCR_700_command_slot *)(memory + SLOTS_OFFSET);
326 hostdata->dev = dev;
327
328 pSlots = pScript + SLOTS_OFFSET;
329
330 /* Fill in the missing routines from the host template */
331 tpnt->queuecommand = NCR_700_queuecommand;
332 tpnt->eh_abort_handler = NCR_700_abort;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700333 tpnt->eh_bus_reset_handler = NCR_700_bus_reset;
334 tpnt->eh_host_reset_handler = NCR_700_host_reset;
335 tpnt->can_queue = NCR_700_COMMAND_SLOTS_PER_HOST;
336 tpnt->sg_tablesize = NCR_700_SG_SEGMENTS;
337 tpnt->cmd_per_lun = NCR_700_CMD_PER_LUN;
338 tpnt->use_clustering = ENABLE_CLUSTERING;
339 tpnt->slave_configure = NCR_700_slave_configure;
340 tpnt->slave_destroy = NCR_700_slave_destroy;
341 tpnt->change_queue_depth = NCR_700_change_queue_depth;
342 tpnt->change_queue_type = NCR_700_change_queue_type;
343
344 if(tpnt->name == NULL)
345 tpnt->name = "53c700";
346 if(tpnt->proc_name == NULL)
347 tpnt->proc_name = "53c700";
348
349
350 host = scsi_host_alloc(tpnt, 4);
351 if (!host)
352 return NULL;
353 memset(hostdata->slots, 0, sizeof(struct NCR_700_command_slot)
354 * NCR_700_COMMAND_SLOTS_PER_HOST);
355 for(j = 0; j < NCR_700_COMMAND_SLOTS_PER_HOST; j++) {
356 dma_addr_t offset = (dma_addr_t)((unsigned long)&hostdata->slots[j].SG[0]
357 - (unsigned long)&hostdata->slots[0].SG[0]);
358 hostdata->slots[j].pSG = (struct NCR_700_SG_List *)((unsigned long)(pSlots + offset));
359 if(j == 0)
360 hostdata->free_list = &hostdata->slots[j];
361 else
362 hostdata->slots[j-1].ITL_forw = &hostdata->slots[j];
363 hostdata->slots[j].state = NCR_700_SLOT_FREE;
364 }
365
366 for(j = 0; j < sizeof(SCRIPT)/sizeof(SCRIPT[0]); j++) {
367 script[j] = bS_to_host(SCRIPT[j]);
368 }
369
370 /* adjust all labels to be bus physical */
371 for(j = 0; j < PATCHES; j++) {
372 script[LABELPATCHES[j]] = bS_to_host(pScript + SCRIPT[LABELPATCHES[j]]);
373 }
374 /* now patch up fixed addresses. */
375 script_patch_32(script, MessageLocation,
376 pScript + MSGOUT_OFFSET);
377 script_patch_32(script, StatusAddress,
378 pScript + STATUS_OFFSET);
379 script_patch_32(script, ReceiveMsgAddress,
380 pScript + MSGIN_OFFSET);
381
382 hostdata->script = script;
383 hostdata->pScript = pScript;
384 dma_sync_single_for_device(hostdata->dev, pScript, sizeof(SCRIPT), DMA_TO_DEVICE);
385 hostdata->state = NCR_700_HOST_FREE;
386 hostdata->cmd = NULL;
387 host->max_id = 7;
388 host->max_lun = NCR_700_MAX_LUNS;
389 BUG_ON(NCR_700_transport_template == NULL);
390 host->transportt = NCR_700_transport_template;
56fece22005-04-03 03:57:48 -0600391 host->unique_id = (unsigned long)hostdata->base;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700392 hostdata->eh_complete = NULL;
393 host->hostdata[0] = (unsigned long)hostdata;
394 /* kick the chip */
395 NCR_700_writeb(0xff, host, CTEST9_REG);
396 if(hostdata->chip710)
397 hostdata->rev = (NCR_700_readb(host, CTEST8_REG)>>4) & 0x0f;
398 else
399 hostdata->rev = (NCR_700_readb(host, CTEST7_REG)>>4) & 0x0f;
400 hostdata->fast = (NCR_700_readb(host, CTEST9_REG) == 0);
401 if(banner == 0) {
402 printk(KERN_NOTICE "53c700: Version " NCR_700_VERSION " By James.Bottomley@HansenPartnership.com\n");
403 banner = 1;
404 }
405 printk(KERN_NOTICE "scsi%d: %s rev %d %s\n", host->host_no,
406 hostdata->chip710 ? "53c710" :
407 (hostdata->fast ? "53c700-66" : "53c700"),
408 hostdata->rev, hostdata->differential ?
409 "(Differential)" : "");
410 /* reset the chip */
411 NCR_700_chip_reset(host);
412
413 if (scsi_add_host(host, dev)) {
414 dev_printk(KERN_ERR, dev, "53c700: scsi_add_host failed\n");
415 scsi_host_put(host);
416 return NULL;
417 }
418
419 spi_signalling(host) = hostdata->differential ? SPI_SIGNAL_HVD :
420 SPI_SIGNAL_SE;
421
422 return host;
423}
424
425int
426NCR_700_release(struct Scsi_Host *host)
427{
428 struct NCR_700_Host_Parameters *hostdata =
429 (struct NCR_700_Host_Parameters *)host->hostdata[0];
430
431 dma_free_noncoherent(hostdata->dev, TOTAL_MEM_SIZE,
432 hostdata->script, hostdata->pScript);
433 return 1;
434}
435
436static inline __u8
437NCR_700_identify(int can_disconnect, __u8 lun)
438{
439 return IDENTIFY_BASE |
440 ((can_disconnect) ? 0x40 : 0) |
441 (lun & NCR_700_LUN_MASK);
442}
443
444/*
445 * Function : static int data_residual (Scsi_Host *host)
446 *
447 * Purpose : return residual data count of what's in the chip. If you
448 * really want to know what this function is doing, it's almost a
449 * direct transcription of the algorithm described in the 53c710
450 * guide, except that the DBC and DFIFO registers are only 6 bits
451 * wide on a 53c700.
452 *
453 * Inputs : host - SCSI host */
454static inline int
455NCR_700_data_residual (struct Scsi_Host *host) {
456 struct NCR_700_Host_Parameters *hostdata =
457 (struct NCR_700_Host_Parameters *)host->hostdata[0];
458 int count, synchronous = 0;
459 unsigned int ddir;
460
461 if(hostdata->chip710) {
462 count = ((NCR_700_readb(host, DFIFO_REG) & 0x7f) -
463 (NCR_700_readl(host, DBC_REG) & 0x7f)) & 0x7f;
464 } else {
465 count = ((NCR_700_readb(host, DFIFO_REG) & 0x3f) -
466 (NCR_700_readl(host, DBC_REG) & 0x3f)) & 0x3f;
467 }
468
469 if(hostdata->fast)
470 synchronous = NCR_700_readb(host, SXFER_REG) & 0x0f;
471
472 /* get the data direction */
473 ddir = NCR_700_readb(host, CTEST0_REG) & 0x01;
474
475 if (ddir) {
476 /* Receive */
477 if (synchronous)
478 count += (NCR_700_readb(host, SSTAT2_REG) & 0xf0) >> 4;
479 else
480 if (NCR_700_readb(host, SSTAT1_REG) & SIDL_REG_FULL)
481 ++count;
482 } else {
483 /* Send */
484 __u8 sstat = NCR_700_readb(host, SSTAT1_REG);
485 if (sstat & SODL_REG_FULL)
486 ++count;
487 if (synchronous && (sstat & SODR_REG_FULL))
488 ++count;
489 }
490#ifdef NCR_700_DEBUG
491 if(count)
492 printk("RESIDUAL IS %d (ddir %d)\n", count, ddir);
493#endif
494 return count;
495}
496
497/* print out the SCSI wires and corresponding phase from the SBCL register
498 * in the chip */
499static inline char *
500sbcl_to_string(__u8 sbcl)
501{
502 int i;
503 static char ret[256];
504
505 ret[0]='\0';
506 for(i=0; i<8; i++) {
507 if((1<<i) & sbcl)
508 strcat(ret, NCR_700_SBCL_bits[i]);
509 }
510 strcat(ret, NCR_700_SBCL_to_phase[sbcl & 0x07]);
511 return ret;
512}
513
514static inline __u8
515bitmap_to_number(__u8 bitmap)
516{
517 __u8 i;
518
519 for(i=0; i<8 && !(bitmap &(1<<i)); i++)
520 ;
521 return i;
522}
523
524/* Pull a slot off the free list */
525STATIC struct NCR_700_command_slot *
526find_empty_slot(struct NCR_700_Host_Parameters *hostdata)
527{
528 struct NCR_700_command_slot *slot = hostdata->free_list;
529
530 if(slot == NULL) {
531 /* sanity check */
532 if(hostdata->command_slot_count != NCR_700_COMMAND_SLOTS_PER_HOST)
533 printk(KERN_ERR "SLOTS FULL, but count is %d, should be %d\n", hostdata->command_slot_count, NCR_700_COMMAND_SLOTS_PER_HOST);
534 return NULL;
535 }
536
537 if(slot->state != NCR_700_SLOT_FREE)
538 /* should panic! */
539 printk(KERN_ERR "BUSY SLOT ON FREE LIST!!!\n");
540
541
542 hostdata->free_list = slot->ITL_forw;
543 slot->ITL_forw = NULL;
544
545
546 /* NOTE: set the state to busy here, not queued, since this
547 * indicates the slot is in use and cannot be run by the IRQ
548 * finish routine. If we cannot queue the command when it
549 * is properly build, we then change to NCR_700_SLOT_QUEUED */
550 slot->state = NCR_700_SLOT_BUSY;
551 hostdata->command_slot_count++;
552
553 return slot;
554}
555
556STATIC void
557free_slot(struct NCR_700_command_slot *slot,
558 struct NCR_700_Host_Parameters *hostdata)
559{
560 if((slot->state & NCR_700_SLOT_MASK) != NCR_700_SLOT_MAGIC) {
561 printk(KERN_ERR "53c700: SLOT %p is not MAGIC!!!\n", slot);
562 }
563 if(slot->state == NCR_700_SLOT_FREE) {
564 printk(KERN_ERR "53c700: SLOT %p is FREE!!!\n", slot);
565 }
566
567 slot->resume_offset = 0;
568 slot->cmnd = NULL;
569 slot->state = NCR_700_SLOT_FREE;
570 slot->ITL_forw = hostdata->free_list;
571 hostdata->free_list = slot;
572 hostdata->command_slot_count--;
573}
574
575
576/* This routine really does very little. The command is indexed on
577 the ITL and (if tagged) the ITLQ lists in _queuecommand */
578STATIC void
579save_for_reselection(struct NCR_700_Host_Parameters *hostdata,
580 struct scsi_cmnd *SCp, __u32 dsp)
581{
582 /* Its just possible that this gets executed twice */
583 if(SCp != NULL) {
584 struct NCR_700_command_slot *slot =
585 (struct NCR_700_command_slot *)SCp->host_scribble;
586
587 slot->resume_offset = dsp;
588 }
589 hostdata->state = NCR_700_HOST_FREE;
590 hostdata->cmd = NULL;
591}
592
593STATIC inline void
594NCR_700_unmap(struct NCR_700_Host_Parameters *hostdata, struct scsi_cmnd *SCp,
595 struct NCR_700_command_slot *slot)
596{
597 if(SCp->sc_data_direction != DMA_NONE &&
598 SCp->sc_data_direction != DMA_BIDIRECTIONAL) {
599 if(SCp->use_sg) {
600 dma_unmap_sg(hostdata->dev, SCp->buffer,
601 SCp->use_sg, SCp->sc_data_direction);
602 } else {
603 dma_unmap_single(hostdata->dev, slot->dma_handle,
604 SCp->request_bufflen,
605 SCp->sc_data_direction);
606 }
607 }
608}
609
610STATIC inline void
611NCR_700_scsi_done(struct NCR_700_Host_Parameters *hostdata,
612 struct scsi_cmnd *SCp, int result)
613{
614 hostdata->state = NCR_700_HOST_FREE;
615 hostdata->cmd = NULL;
616
617 if(SCp != NULL) {
618 struct NCR_700_command_slot *slot =
619 (struct NCR_700_command_slot *)SCp->host_scribble;
620
621 NCR_700_unmap(hostdata, SCp, slot);
622 dma_unmap_single(hostdata->dev, slot->pCmd,
623 sizeof(SCp->cmnd), DMA_TO_DEVICE);
624 if(SCp->cmnd[0] == REQUEST_SENSE && SCp->cmnd[6] == NCR_700_INTERNAL_SENSE_MAGIC) {
625#ifdef NCR_700_DEBUG
626 printk(" ORIGINAL CMD %p RETURNED %d, new return is %d sense is\n",
627 SCp, SCp->cmnd[7], result);
628 scsi_print_sense("53c700", SCp);
629
630#endif
631 /* restore the old result if the request sense was
632 * successful */
633 if(result == 0)
634 result = SCp->cmnd[7];
635 /* now restore the original command */
636 memcpy((void *) SCp->cmnd, (void *) SCp->data_cmnd,
637 sizeof(SCp->data_cmnd));
638 SCp->request_buffer = SCp->buffer;
639 SCp->request_bufflen = SCp->bufflen;
640 SCp->use_sg = SCp->old_use_sg;
641 SCp->cmd_len = SCp->old_cmd_len;
642 SCp->sc_data_direction = SCp->sc_old_data_direction;
643 SCp->underflow = SCp->old_underflow;
644
645 }
646 free_slot(slot, hostdata);
647#ifdef NCR_700_DEBUG
648 if(NCR_700_get_depth(SCp->device) == 0 ||
649 NCR_700_get_depth(SCp->device) > SCp->device->queue_depth)
650 printk(KERN_ERR "Invalid depth in NCR_700_scsi_done(): %d\n",
651 NCR_700_get_depth(SCp->device));
652#endif /* NCR_700_DEBUG */
653 NCR_700_set_depth(SCp->device, NCR_700_get_depth(SCp->device) - 1);
654
655 SCp->host_scribble = NULL;
656 SCp->result = result;
657 SCp->scsi_done(SCp);
658 } else {
659 printk(KERN_ERR "53c700: SCSI DONE HAS NULL SCp\n");
660 }
661}
662
663
664STATIC void
665NCR_700_internal_bus_reset(struct Scsi_Host *host)
666{
667 /* Bus reset */
668 NCR_700_writeb(ASSERT_RST, host, SCNTL1_REG);
669 udelay(50);
670 NCR_700_writeb(0, host, SCNTL1_REG);
671
672}
673
674STATIC void
675NCR_700_chip_setup(struct Scsi_Host *host)
676{
677 struct NCR_700_Host_Parameters *hostdata =
678 (struct NCR_700_Host_Parameters *)host->hostdata[0];
679 __u32 dcntl_extra = 0;
680 __u8 min_period;
681 __u8 min_xferp = (hostdata->chip710 ? NCR_710_MIN_XFERP : NCR_700_MIN_XFERP);
682
683 if(hostdata->chip710) {
684 __u8 burst_disable = hostdata->burst_disable
685 ? BURST_DISABLE : 0;
686 dcntl_extra = COMPAT_700_MODE;
687
688 NCR_700_writeb(dcntl_extra, host, DCNTL_REG);
689 NCR_700_writeb(BURST_LENGTH_8 | hostdata->dmode_extra,
690 host, DMODE_710_REG);
691 NCR_700_writeb(burst_disable | (hostdata->differential ?
692 DIFF : 0), host, CTEST7_REG);
693 NCR_700_writeb(BTB_TIMER_DISABLE, host, CTEST0_REG);
694 NCR_700_writeb(FULL_ARBITRATION | ENABLE_PARITY | PARITY
695 | AUTO_ATN, host, SCNTL0_REG);
696 } else {
697 NCR_700_writeb(BURST_LENGTH_8 | hostdata->dmode_extra,
698 host, DMODE_700_REG);
699 NCR_700_writeb(hostdata->differential ?
700 DIFF : 0, host, CTEST7_REG);
701 if(hostdata->fast) {
702 /* this is for 700-66, does nothing on 700 */
703 NCR_700_writeb(LAST_DIS_ENBL | ENABLE_ACTIVE_NEGATION
704 | GENERATE_RECEIVE_PARITY, host,
705 CTEST8_REG);
706 } else {
707 NCR_700_writeb(FULL_ARBITRATION | ENABLE_PARITY
708 | PARITY | AUTO_ATN, host, SCNTL0_REG);
709 }
710 }
711
712 NCR_700_writeb(1 << host->this_id, host, SCID_REG);
713 NCR_700_writeb(0, host, SBCL_REG);
714 NCR_700_writeb(ASYNC_OPERATION, host, SXFER_REG);
715
716 NCR_700_writeb(PHASE_MM_INT | SEL_TIMEOUT_INT | GROSS_ERR_INT | UX_DISC_INT
717 | RST_INT | PAR_ERR_INT | SELECT_INT, host, SIEN_REG);
718
719 NCR_700_writeb(ABORT_INT | INT_INST_INT | ILGL_INST_INT, host, DIEN_REG);
720 NCR_700_writeb(ENABLE_SELECT, host, SCNTL1_REG);
721 if(hostdata->clock > 75) {
722 printk(KERN_ERR "53c700: Clock speed %dMHz is too high: 75Mhz is the maximum this chip can be driven at\n", hostdata->clock);
723 /* do the best we can, but the async clock will be out
724 * of spec: sync divider 2, async divider 3 */
725 DEBUG(("53c700: sync 2 async 3\n"));
726 NCR_700_writeb(SYNC_DIV_2_0, host, SBCL_REG);
727 NCR_700_writeb(ASYNC_DIV_3_0 | dcntl_extra, host, DCNTL_REG);
728 hostdata->sync_clock = hostdata->clock/2;
729 } else if(hostdata->clock > 50 && hostdata->clock <= 75) {
730 /* sync divider 1.5, async divider 3 */
731 DEBUG(("53c700: sync 1.5 async 3\n"));
732 NCR_700_writeb(SYNC_DIV_1_5, host, SBCL_REG);
733 NCR_700_writeb(ASYNC_DIV_3_0 | dcntl_extra, host, DCNTL_REG);
734 hostdata->sync_clock = hostdata->clock*2;
735 hostdata->sync_clock /= 3;
736
737 } else if(hostdata->clock > 37 && hostdata->clock <= 50) {
738 /* sync divider 1, async divider 2 */
739 DEBUG(("53c700: sync 1 async 2\n"));
740 NCR_700_writeb(SYNC_DIV_1_0, host, SBCL_REG);
741 NCR_700_writeb(ASYNC_DIV_2_0 | dcntl_extra, host, DCNTL_REG);
742 hostdata->sync_clock = hostdata->clock;
743 } else if(hostdata->clock > 25 && hostdata->clock <=37) {
744 /* sync divider 1, async divider 1.5 */
745 DEBUG(("53c700: sync 1 async 1.5\n"));
746 NCR_700_writeb(SYNC_DIV_1_0, host, SBCL_REG);
747 NCR_700_writeb(ASYNC_DIV_1_5 | dcntl_extra, host, DCNTL_REG);
748 hostdata->sync_clock = hostdata->clock;
749 } else {
750 DEBUG(("53c700: sync 1 async 1\n"));
751 NCR_700_writeb(SYNC_DIV_1_0, host, SBCL_REG);
752 NCR_700_writeb(ASYNC_DIV_1_0 | dcntl_extra, host, DCNTL_REG);
753 /* sync divider 1, async divider 1 */
754 hostdata->sync_clock = hostdata->clock;
755 }
756 /* Calculate the actual minimum period that can be supported
757 * by our synchronous clock speed. See the 710 manual for
758 * exact details of this calculation which is based on a
759 * setting of the SXFER register */
760 min_period = 1000*(4+min_xferp)/(4*hostdata->sync_clock);
761 hostdata->min_period = NCR_700_MIN_PERIOD;
762 if(min_period > NCR_700_MIN_PERIOD)
763 hostdata->min_period = min_period;
764}
765
766STATIC void
767NCR_700_chip_reset(struct Scsi_Host *host)
768{
769 struct NCR_700_Host_Parameters *hostdata =
770 (struct NCR_700_Host_Parameters *)host->hostdata[0];
771 if(hostdata->chip710) {
772 NCR_700_writeb(SOFTWARE_RESET_710, host, ISTAT_REG);
773 udelay(100);
774
775 NCR_700_writeb(0, host, ISTAT_REG);
776 } else {
777 NCR_700_writeb(SOFTWARE_RESET, host, DCNTL_REG);
778 udelay(100);
779
780 NCR_700_writeb(0, host, DCNTL_REG);
781 }
782
783 mdelay(1000);
784
785 NCR_700_chip_setup(host);
786}
787
788/* The heart of the message processing engine is that the instruction
789 * immediately after the INT is the normal case (and so must be CLEAR
790 * ACK). If we want to do something else, we call that routine in
791 * scripts and set temp to be the normal case + 8 (skipping the CLEAR
792 * ACK) so that the routine returns correctly to resume its activity
793 * */
794STATIC __u32
795process_extended_message(struct Scsi_Host *host,
796 struct NCR_700_Host_Parameters *hostdata,
797 struct scsi_cmnd *SCp, __u32 dsp, __u32 dsps)
798{
799 __u32 resume_offset = dsp, temp = dsp + 8;
800 __u8 pun = 0xff, lun = 0xff;
801
802 if(SCp != NULL) {
803 pun = SCp->device->id;
804 lun = SCp->device->lun;
805 }
806
807 switch(hostdata->msgin[2]) {
808 case A_SDTR_MSG:
809 if(SCp != NULL && NCR_700_is_flag_set(SCp->device, NCR_700_DEV_BEGIN_SYNC_NEGOTIATION)) {
810 struct scsi_target *starget = SCp->device->sdev_target;
811 __u8 period = hostdata->msgin[3];
812 __u8 offset = hostdata->msgin[4];
813
814 if(offset == 0 || period == 0) {
815 offset = 0;
816 period = 0;
817 }
818
819 spi_offset(starget) = offset;
820 spi_period(starget) = period;
821
822 if(NCR_700_is_flag_set(SCp->device, NCR_700_DEV_PRINT_SYNC_NEGOTIATION)) {
823 spi_display_xfer_agreement(starget);
824 NCR_700_clear_flag(SCp->device, NCR_700_DEV_PRINT_SYNC_NEGOTIATION);
825 }
826
827 NCR_700_set_flag(SCp->device, NCR_700_DEV_NEGOTIATED_SYNC);
828 NCR_700_clear_flag(SCp->device, NCR_700_DEV_BEGIN_SYNC_NEGOTIATION);
829
830 NCR_700_writeb(NCR_700_get_SXFER(SCp->device),
831 host, SXFER_REG);
832
833 } else {
834 /* SDTR message out of the blue, reject it */
Jeff Garzik017560f2005-10-24 18:04:36 -0400835 shost_printk(KERN_WARNING, host,
836 "Unexpected SDTR msg\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700837 hostdata->msgout[0] = A_REJECT_MSG;
838 dma_cache_sync(hostdata->msgout, 1, DMA_TO_DEVICE);
839 script_patch_16(hostdata->script, MessageCount, 1);
840 /* SendMsgOut returns, so set up the return
841 * address */
842 resume_offset = hostdata->pScript + Ent_SendMessageWithATN;
843 }
844 break;
845
846 case A_WDTR_MSG:
847 printk(KERN_INFO "scsi%d: (%d:%d), Unsolicited WDTR after CMD, Rejecting\n",
848 host->host_no, pun, lun);
849 hostdata->msgout[0] = A_REJECT_MSG;
850 dma_cache_sync(hostdata->msgout, 1, DMA_TO_DEVICE);
851 script_patch_16(hostdata->script, MessageCount, 1);
852 resume_offset = hostdata->pScript + Ent_SendMessageWithATN;
853
854 break;
855
856 default:
857 printk(KERN_INFO "scsi%d (%d:%d): Unexpected message %s: ",
858 host->host_no, pun, lun,
859 NCR_700_phase[(dsps & 0xf00) >> 8]);
Matthew Wilcox1abfd372005-12-15 16:22:01 -0500860 spi_print_msg(hostdata->msgin);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700861 printk("\n");
862 /* just reject it */
863 hostdata->msgout[0] = A_REJECT_MSG;
864 dma_cache_sync(hostdata->msgout, 1, DMA_TO_DEVICE);
865 script_patch_16(hostdata->script, MessageCount, 1);
866 /* SendMsgOut returns, so set up the return
867 * address */
868 resume_offset = hostdata->pScript + Ent_SendMessageWithATN;
869 }
870 NCR_700_writel(temp, host, TEMP_REG);
871 return resume_offset;
872}
873
874STATIC __u32
875process_message(struct Scsi_Host *host, struct NCR_700_Host_Parameters *hostdata,
876 struct scsi_cmnd *SCp, __u32 dsp, __u32 dsps)
877{
878 /* work out where to return to */
879 __u32 temp = dsp + 8, resume_offset = dsp;
880 __u8 pun = 0xff, lun = 0xff;
881
882 if(SCp != NULL) {
883 pun = SCp->device->id;
884 lun = SCp->device->lun;
885 }
886
887#ifdef NCR_700_DEBUG
888 printk("scsi%d (%d:%d): message %s: ", host->host_no, pun, lun,
889 NCR_700_phase[(dsps & 0xf00) >> 8]);
Matthew Wilcox1abfd372005-12-15 16:22:01 -0500890 spi_print_msg(hostdata->msgin);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700891 printk("\n");
892#endif
893
894 switch(hostdata->msgin[0]) {
895
896 case A_EXTENDED_MSG:
897 resume_offset = process_extended_message(host, hostdata, SCp,
898 dsp, dsps);
899 break;
900
901 case A_REJECT_MSG:
902 if(SCp != NULL && NCR_700_is_flag_set(SCp->device, NCR_700_DEV_BEGIN_SYNC_NEGOTIATION)) {
903 /* Rejected our sync negotiation attempt */
904 spi_period(SCp->device->sdev_target) =
905 spi_offset(SCp->device->sdev_target) = 0;
906 NCR_700_set_flag(SCp->device, NCR_700_DEV_NEGOTIATED_SYNC);
907 NCR_700_clear_flag(SCp->device, NCR_700_DEV_BEGIN_SYNC_NEGOTIATION);
908 } else if(SCp != NULL && NCR_700_get_tag_neg_state(SCp->device) == NCR_700_DURING_TAG_NEGOTIATION) {
909 /* rejected our first simple tag message */
Jeff Garzik017560f2005-10-24 18:04:36 -0400910 scmd_printk(KERN_WARNING, SCp,
911 "Rejected first tag queue attempt, turning off tag queueing\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700912 /* we're done negotiating */
913 NCR_700_set_tag_neg_state(SCp->device, NCR_700_FINISHED_TAG_NEGOTIATION);
Jeff Garzik017560f2005-10-24 18:04:36 -0400914 hostdata->tag_negotiated &= ~(1<<scmd_id(SCp));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700915 SCp->device->tagged_supported = 0;
916 scsi_deactivate_tcq(SCp->device, host->cmd_per_lun);
917 } else {
Jeff Garzik017560f2005-10-24 18:04:36 -0400918 shost_printk(KERN_WARNING, host,
919 "(%d:%d) Unexpected REJECT Message %s\n",
920 pun, lun,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700921 NCR_700_phase[(dsps & 0xf00) >> 8]);
922 /* however, just ignore it */
923 }
924 break;
925
926 case A_PARITY_ERROR_MSG:
927 printk(KERN_ERR "scsi%d (%d:%d) Parity Error!\n", host->host_no,
928 pun, lun);
929 NCR_700_internal_bus_reset(host);
930 break;
931 case A_SIMPLE_TAG_MSG:
932 printk(KERN_INFO "scsi%d (%d:%d) SIMPLE TAG %d %s\n", host->host_no,
933 pun, lun, hostdata->msgin[1],
934 NCR_700_phase[(dsps & 0xf00) >> 8]);
935 /* just ignore it */
936 break;
937 default:
938 printk(KERN_INFO "scsi%d (%d:%d): Unexpected message %s: ",
939 host->host_no, pun, lun,
940 NCR_700_phase[(dsps & 0xf00) >> 8]);
941
Matthew Wilcox1abfd372005-12-15 16:22:01 -0500942 spi_print_msg(hostdata->msgin);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700943 printk("\n");
944 /* just reject it */
945 hostdata->msgout[0] = A_REJECT_MSG;
946 dma_cache_sync(hostdata->msgout, 1, DMA_TO_DEVICE);
947 script_patch_16(hostdata->script, MessageCount, 1);
948 /* SendMsgOut returns, so set up the return
949 * address */
950 resume_offset = hostdata->pScript + Ent_SendMessageWithATN;
951
952 break;
953 }
954 NCR_700_writel(temp, host, TEMP_REG);
955 /* set us up to receive another message */
956 dma_cache_sync(hostdata->msgin, MSG_ARRAY_SIZE, DMA_FROM_DEVICE);
957 return resume_offset;
958}
959
960STATIC __u32
961process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp,
962 struct Scsi_Host *host,
963 struct NCR_700_Host_Parameters *hostdata)
964{
965 __u32 resume_offset = 0;
966 __u8 pun = 0xff, lun=0xff;
967
968 if(SCp != NULL) {
969 pun = SCp->device->id;
970 lun = SCp->device->lun;
971 }
972
973 if(dsps == A_GOOD_STATUS_AFTER_STATUS) {
974 DEBUG((" COMMAND COMPLETE, status=%02x\n",
975 hostdata->status[0]));
976 /* OK, if TCQ still under negotiation, we now know it works */
977 if (NCR_700_get_tag_neg_state(SCp->device) == NCR_700_DURING_TAG_NEGOTIATION)
978 NCR_700_set_tag_neg_state(SCp->device,
979 NCR_700_FINISHED_TAG_NEGOTIATION);
980
981 /* check for contingent allegiance contitions */
982 if(status_byte(hostdata->status[0]) == CHECK_CONDITION ||
983 status_byte(hostdata->status[0]) == COMMAND_TERMINATED) {
984 struct NCR_700_command_slot *slot =
985 (struct NCR_700_command_slot *)SCp->host_scribble;
986 if(SCp->cmnd[0] == REQUEST_SENSE) {
987 /* OOPS: bad device, returning another
988 * contingent allegiance condition */
Jeff Garzik017560f2005-10-24 18:04:36 -0400989 scmd_printk(KERN_ERR, SCp,
990 "broken device is looping in contingent allegiance: ignoring\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700991 NCR_700_scsi_done(hostdata, SCp, hostdata->status[0]);
992 } else {
993#ifdef NCR_DEBUG
994 scsi_print_command(SCp);
995 printk(" cmd %p has status %d, requesting sense\n",
996 SCp, hostdata->status[0]);
997#endif
998 /* we can destroy the command here
999 * because the contingent allegiance
1000 * condition will cause a retry which
1001 * will re-copy the command from the
1002 * saved data_cmnd. We also unmap any
1003 * data associated with the command
1004 * here */
1005 NCR_700_unmap(hostdata, SCp, slot);
1006
1007 SCp->cmnd[0] = REQUEST_SENSE;
1008 SCp->cmnd[1] = (SCp->device->lun & 0x7) << 5;
1009 SCp->cmnd[2] = 0;
1010 SCp->cmnd[3] = 0;
1011 SCp->cmnd[4] = sizeof(SCp->sense_buffer);
1012 SCp->cmnd[5] = 0;
1013 SCp->cmd_len = 6;
1014 /* Here's a quiet hack: the
1015 * REQUEST_SENSE command is six bytes,
1016 * so store a flag indicating that
1017 * this was an internal sense request
1018 * and the original status at the end
1019 * of the command */
1020 SCp->cmnd[6] = NCR_700_INTERNAL_SENSE_MAGIC;
1021 SCp->cmnd[7] = hostdata->status[0];
1022 SCp->use_sg = 0;
1023 SCp->sc_data_direction = DMA_FROM_DEVICE;
1024 dma_sync_single_for_device(hostdata->dev, slot->pCmd,
1025 SCp->cmd_len, DMA_TO_DEVICE);
1026 SCp->request_bufflen = sizeof(SCp->sense_buffer);
1027 slot->dma_handle = dma_map_single(hostdata->dev, SCp->sense_buffer, sizeof(SCp->sense_buffer), DMA_FROM_DEVICE);
1028 slot->SG[0].ins = bS_to_host(SCRIPT_MOVE_DATA_IN | sizeof(SCp->sense_buffer));
1029 slot->SG[0].pAddr = bS_to_host(slot->dma_handle);
1030 slot->SG[1].ins = bS_to_host(SCRIPT_RETURN);
1031 slot->SG[1].pAddr = 0;
1032 slot->resume_offset = hostdata->pScript;
1033 dma_cache_sync(slot->SG, sizeof(slot->SG[0])*2, DMA_TO_DEVICE);
1034 dma_cache_sync(SCp->sense_buffer, sizeof(SCp->sense_buffer), DMA_FROM_DEVICE);
1035
1036 /* queue the command for reissue */
1037 slot->state = NCR_700_SLOT_QUEUED;
1038 hostdata->state = NCR_700_HOST_FREE;
1039 hostdata->cmd = NULL;
1040 }
1041 } else {
1042 // Currently rely on the mid layer evaluation
1043 // of the tag queuing capability
1044 //
1045 //if(status_byte(hostdata->status[0]) == GOOD &&
1046 // SCp->cmnd[0] == INQUIRY && SCp->use_sg == 0) {
1047 // /* Piggy back the tag queueing support
1048 // * on this command */
1049 // dma_sync_single_for_cpu(hostdata->dev,
1050 // slot->dma_handle,
1051 // SCp->request_bufflen,
1052 // DMA_FROM_DEVICE);
1053 // if(((char *)SCp->request_buffer)[7] & 0x02) {
Jeff Garzik017560f2005-10-24 18:04:36 -04001054 // scmd_printk(KERN_INFO, SCp,
1055 // "Enabling Tag Command Queuing\n");
1056 // hostdata->tag_negotiated |= (1<<scmd_id(SCp));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001057 // NCR_700_set_flag(SCp->device, NCR_700_DEV_BEGIN_TAG_QUEUEING);
1058 // } else {
1059 // NCR_700_clear_flag(SCp->device, NCR_700_DEV_BEGIN_TAG_QUEUEING);
Jeff Garzik017560f2005-10-24 18:04:36 -04001060 // hostdata->tag_negotiated &= ~(1<<scmd_id(SCp));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001061 // }
1062 //}
1063 NCR_700_scsi_done(hostdata, SCp, hostdata->status[0]);
1064 }
1065 } else if((dsps & 0xfffff0f0) == A_UNEXPECTED_PHASE) {
1066 __u8 i = (dsps & 0xf00) >> 8;
1067
Jeff Garzik017560f2005-10-24 18:04:36 -04001068 scmd_printk(KERN_ERR, SCp, "UNEXPECTED PHASE %s (%s)\n",
Linus Torvalds1da177e2005-04-16 15:20:36 -07001069 NCR_700_phase[i],
1070 sbcl_to_string(NCR_700_readb(host, SBCL_REG)));
Jeff Garzik017560f2005-10-24 18:04:36 -04001071 scmd_printk(KERN_ERR, SCp, " len = %d, cmd =",
1072 SCp->cmd_len);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001073 scsi_print_command(SCp);
1074
1075 NCR_700_internal_bus_reset(host);
1076 } else if((dsps & 0xfffff000) == A_FATAL) {
1077 int i = (dsps & 0xfff);
1078
1079 printk(KERN_ERR "scsi%d: (%d:%d) FATAL ERROR: %s\n",
1080 host->host_no, pun, lun, NCR_700_fatal_messages[i]);
1081 if(dsps == A_FATAL_ILLEGAL_MSG_LENGTH) {
1082 printk(KERN_ERR " msg begins %02x %02x\n",
1083 hostdata->msgin[0], hostdata->msgin[1]);
1084 }
1085 NCR_700_internal_bus_reset(host);
1086 } else if((dsps & 0xfffff0f0) == A_DISCONNECT) {
1087#ifdef NCR_700_DEBUG
1088 __u8 i = (dsps & 0xf00) >> 8;
1089
1090 printk("scsi%d: (%d:%d), DISCONNECTED (%d) %s\n",
1091 host->host_no, pun, lun,
1092 i, NCR_700_phase[i]);
1093#endif
1094 save_for_reselection(hostdata, SCp, dsp);
1095
1096 } else if(dsps == A_RESELECTION_IDENTIFIED) {
1097 __u8 lun;
1098 struct NCR_700_command_slot *slot;
1099 __u8 reselection_id = hostdata->reselection_id;
1100 struct scsi_device *SDp;
1101
1102 lun = hostdata->msgin[0] & 0x1f;
1103
1104 hostdata->reselection_id = 0xff;
1105 DEBUG(("scsi%d: (%d:%d) RESELECTED!\n",
1106 host->host_no, reselection_id, lun));
1107 /* clear the reselection indicator */
1108 SDp = __scsi_device_lookup(host, 0, reselection_id, lun);
1109 if(unlikely(SDp == NULL)) {
1110 printk(KERN_ERR "scsi%d: (%d:%d) HAS NO device\n",
1111 host->host_no, reselection_id, lun);
1112 BUG();
1113 }
1114 if(hostdata->msgin[1] == A_SIMPLE_TAG_MSG) {
1115 struct scsi_cmnd *SCp = scsi_find_tag(SDp, hostdata->msgin[2]);
1116 if(unlikely(SCp == NULL)) {
1117 printk(KERN_ERR "scsi%d: (%d:%d) no saved request for tag %d\n",
1118 host->host_no, reselection_id, lun, hostdata->msgin[2]);
1119 BUG();
1120 }
1121
1122 slot = (struct NCR_700_command_slot *)SCp->host_scribble;
Jeff Garzik017560f2005-10-24 18:04:36 -04001123 DDEBUG(KERN_DEBUG, SDp,
1124 "reselection is tag %d, slot %p(%d)\n",
1125 hostdata->msgin[2], slot, slot->tag);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001126 } else {
1127 struct scsi_cmnd *SCp = scsi_find_tag(SDp, SCSI_NO_TAG);
1128 if(unlikely(SCp == NULL)) {
Jeff Garzik017560f2005-10-24 18:04:36 -04001129 sdev_printk(KERN_ERR, SDp,
1130 "no saved request for untagged cmd\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -07001131 BUG();
1132 }
1133 slot = (struct NCR_700_command_slot *)SCp->host_scribble;
1134 }
1135
1136 if(slot == NULL) {
1137 printk(KERN_ERR "scsi%d: (%d:%d) RESELECTED but no saved command (MSG = %02x %02x %02x)!!\n",
1138 host->host_no, reselection_id, lun,
1139 hostdata->msgin[0], hostdata->msgin[1],
1140 hostdata->msgin[2]);
1141 } else {
1142 if(hostdata->state != NCR_700_HOST_BUSY)
1143 printk(KERN_ERR "scsi%d: FATAL, host not busy during valid reselection!\n",
1144 host->host_no);
1145 resume_offset = slot->resume_offset;
1146 hostdata->cmd = slot->cmnd;
1147
1148 /* re-patch for this command */
1149 script_patch_32_abs(hostdata->script, CommandAddress,
1150 slot->pCmd);
1151 script_patch_16(hostdata->script,
1152 CommandCount, slot->cmnd->cmd_len);
1153 script_patch_32_abs(hostdata->script, SGScriptStartAddress,
1154 to32bit(&slot->pSG[0].ins));
1155
1156 /* Note: setting SXFER only works if we're
1157 * still in the MESSAGE phase, so it is vital
1158 * that ACK is still asserted when we process
1159 * the reselection message. The resume offset
1160 * should therefore always clear ACK */
1161 NCR_700_writeb(NCR_700_get_SXFER(hostdata->cmd->device),
1162 host, SXFER_REG);
1163 dma_cache_sync(hostdata->msgin,
1164 MSG_ARRAY_SIZE, DMA_FROM_DEVICE);
1165 dma_cache_sync(hostdata->msgout,
1166 MSG_ARRAY_SIZE, DMA_TO_DEVICE);
1167 /* I'm just being paranoid here, the command should
1168 * already have been flushed from the cache */
1169 dma_cache_sync(slot->cmnd->cmnd,
1170 slot->cmnd->cmd_len, DMA_TO_DEVICE);
1171
1172
1173
1174 }
1175 } else if(dsps == A_RESELECTED_DURING_SELECTION) {
1176
1177 /* This section is full of debugging code because I've
1178 * never managed to reach it. I think what happens is
1179 * that, because the 700 runs with selection
1180 * interrupts enabled the whole time that we take a
1181 * selection interrupt before we manage to get to the
1182 * reselected script interrupt */
1183
1184 __u8 reselection_id = NCR_700_readb(host, SFBR_REG);
1185 struct NCR_700_command_slot *slot;
1186
1187 /* Take out our own ID */
1188 reselection_id &= ~(1<<host->this_id);
1189
1190 /* I've never seen this happen, so keep this as a printk rather
1191 * than a debug */
1192 printk(KERN_INFO "scsi%d: (%d:%d) RESELECTION DURING SELECTION, dsp=%08x[%04x] state=%d, count=%d\n",
1193 host->host_no, reselection_id, lun, dsp, dsp - hostdata->pScript, hostdata->state, hostdata->command_slot_count);
1194
1195 {
1196 /* FIXME: DEBUGGING CODE */
1197 __u32 SG = (__u32)bS_to_cpu(hostdata->script[A_SGScriptStartAddress_used[0]]);
1198 int i;
1199
1200 for(i=0; i< NCR_700_COMMAND_SLOTS_PER_HOST; i++) {
1201 if(SG >= to32bit(&hostdata->slots[i].pSG[0])
1202 && SG <= to32bit(&hostdata->slots[i].pSG[NCR_700_SG_SEGMENTS]))
1203 break;
1204 }
1205 printk(KERN_INFO "IDENTIFIED SG segment as being %08x in slot %p, cmd %p, slot->resume_offset=%08x\n", SG, &hostdata->slots[i], hostdata->slots[i].cmnd, hostdata->slots[i].resume_offset);
1206 SCp = hostdata->slots[i].cmnd;
1207 }
1208
1209 if(SCp != NULL) {
1210 slot = (struct NCR_700_command_slot *)SCp->host_scribble;
1211 /* change slot from busy to queued to redo command */
1212 slot->state = NCR_700_SLOT_QUEUED;
1213 }
1214 hostdata->cmd = NULL;
1215
1216 if(reselection_id == 0) {
1217 if(hostdata->reselection_id == 0xff) {
1218 printk(KERN_ERR "scsi%d: Invalid reselection during selection!!\n", host->host_no);
1219 return 0;
1220 } else {
1221 printk(KERN_ERR "scsi%d: script reselected and we took a selection interrupt\n",
1222 host->host_no);
1223 reselection_id = hostdata->reselection_id;
1224 }
1225 } else {
1226
1227 /* convert to real ID */
1228 reselection_id = bitmap_to_number(reselection_id);
1229 }
1230 hostdata->reselection_id = reselection_id;
1231 /* just in case we have a stale simple tag message, clear it */
1232 hostdata->msgin[1] = 0;
1233 dma_cache_sync(hostdata->msgin,
1234 MSG_ARRAY_SIZE, DMA_BIDIRECTIONAL);
1235 if(hostdata->tag_negotiated & (1<<reselection_id)) {
1236 resume_offset = hostdata->pScript + Ent_GetReselectionWithTag;
1237 } else {
1238 resume_offset = hostdata->pScript + Ent_GetReselectionData;
1239 }
1240 } else if(dsps == A_COMPLETED_SELECTION_AS_TARGET) {
1241 /* we've just disconnected from the bus, do nothing since
1242 * a return here will re-run the queued command slot
1243 * that may have been interrupted by the initial selection */
1244 DEBUG((" SELECTION COMPLETED\n"));
1245 } else if((dsps & 0xfffff0f0) == A_MSG_IN) {
1246 resume_offset = process_message(host, hostdata, SCp,
1247 dsp, dsps);
1248 } else if((dsps & 0xfffff000) == 0) {
1249 __u8 i = (dsps & 0xf0) >> 4, j = (dsps & 0xf00) >> 8;
1250 printk(KERN_ERR "scsi%d: (%d:%d), unhandled script condition %s %s at %04x\n",
1251 host->host_no, pun, lun, NCR_700_condition[i],
1252 NCR_700_phase[j], dsp - hostdata->pScript);
1253 if(SCp != NULL) {
1254 scsi_print_command(SCp);
1255
1256 if(SCp->use_sg) {
1257 for(i = 0; i < SCp->use_sg + 1; i++) {
1258 printk(KERN_INFO " SG[%d].length = %d, move_insn=%08x, addr %08x\n", i, ((struct scatterlist *)SCp->buffer)[i].length, ((struct NCR_700_command_slot *)SCp->host_scribble)->SG[i].ins, ((struct NCR_700_command_slot *)SCp->host_scribble)->SG[i].pAddr);
1259 }
1260 }
1261 }
1262 NCR_700_internal_bus_reset(host);
1263 } else if((dsps & 0xfffff000) == A_DEBUG_INTERRUPT) {
1264 printk(KERN_NOTICE "scsi%d (%d:%d) DEBUG INTERRUPT %d AT %08x[%04x], continuing\n",
1265 host->host_no, pun, lun, dsps & 0xfff, dsp, dsp - hostdata->pScript);
1266 resume_offset = dsp;
1267 } else {
1268 printk(KERN_ERR "scsi%d: (%d:%d), unidentified script interrupt 0x%x at %04x\n",
1269 host->host_no, pun, lun, dsps, dsp - hostdata->pScript);
1270 NCR_700_internal_bus_reset(host);
1271 }
1272 return resume_offset;
1273}
1274
1275/* We run the 53c700 with selection interrupts always enabled. This
1276 * means that the chip may be selected as soon as the bus frees. On a
1277 * busy bus, this can be before the scripts engine finishes its
1278 * processing. Therefore, part of the selection processing has to be
1279 * to find out what the scripts engine is doing and complete the
1280 * function if necessary (i.e. process the pending disconnect or save
1281 * the interrupted initial selection */
1282STATIC inline __u32
1283process_selection(struct Scsi_Host *host, __u32 dsp)
1284{
1285 __u8 id = 0; /* Squash compiler warning */
1286 int count = 0;
1287 __u32 resume_offset = 0;
1288 struct NCR_700_Host_Parameters *hostdata =
1289 (struct NCR_700_Host_Parameters *)host->hostdata[0];
1290 struct scsi_cmnd *SCp = hostdata->cmd;
1291 __u8 sbcl;
1292
1293 for(count = 0; count < 5; count++) {
1294 id = NCR_700_readb(host, hostdata->chip710 ?
1295 CTEST9_REG : SFBR_REG);
1296
1297 /* Take out our own ID */
1298 id &= ~(1<<host->this_id);
1299 if(id != 0)
1300 break;
1301 udelay(5);
1302 }
1303 sbcl = NCR_700_readb(host, SBCL_REG);
1304 if((sbcl & SBCL_IO) == 0) {
1305 /* mark as having been selected rather than reselected */
1306 id = 0xff;
1307 } else {
1308 /* convert to real ID */
1309 hostdata->reselection_id = id = bitmap_to_number(id);
1310 DEBUG(("scsi%d: Reselected by %d\n",
1311 host->host_no, id));
1312 }
1313 if(hostdata->state == NCR_700_HOST_BUSY && SCp != NULL) {
1314 struct NCR_700_command_slot *slot =
1315 (struct NCR_700_command_slot *)SCp->host_scribble;
1316 DEBUG((" ID %d WARNING: RESELECTION OF BUSY HOST, saving cmd %p, slot %p, addr %x [%04x], resume %x!\n", id, hostdata->cmd, slot, dsp, dsp - hostdata->pScript, resume_offset));
1317
1318 switch(dsp - hostdata->pScript) {
1319 case Ent_Disconnect1:
1320 case Ent_Disconnect2:
1321 save_for_reselection(hostdata, SCp, Ent_Disconnect2 + hostdata->pScript);
1322 break;
1323 case Ent_Disconnect3:
1324 case Ent_Disconnect4:
1325 save_for_reselection(hostdata, SCp, Ent_Disconnect4 + hostdata->pScript);
1326 break;
1327 case Ent_Disconnect5:
1328 case Ent_Disconnect6:
1329 save_for_reselection(hostdata, SCp, Ent_Disconnect6 + hostdata->pScript);
1330 break;
1331 case Ent_Disconnect7:
1332 case Ent_Disconnect8:
1333 save_for_reselection(hostdata, SCp, Ent_Disconnect8 + hostdata->pScript);
1334 break;
1335 case Ent_Finish1:
1336 case Ent_Finish2:
1337 process_script_interrupt(A_GOOD_STATUS_AFTER_STATUS, dsp, SCp, host, hostdata);
1338 break;
1339
1340 default:
1341 slot->state = NCR_700_SLOT_QUEUED;
1342 break;
1343 }
1344 }
1345 hostdata->state = NCR_700_HOST_BUSY;
1346 hostdata->cmd = NULL;
1347 /* clear any stale simple tag message */
1348 hostdata->msgin[1] = 0;
1349 dma_cache_sync(hostdata->msgin, MSG_ARRAY_SIZE,
1350 DMA_BIDIRECTIONAL);
1351
1352 if(id == 0xff) {
1353 /* Selected as target, Ignore */
1354 resume_offset = hostdata->pScript + Ent_SelectedAsTarget;
1355 } else if(hostdata->tag_negotiated & (1<<id)) {
1356 resume_offset = hostdata->pScript + Ent_GetReselectionWithTag;
1357 } else {
1358 resume_offset = hostdata->pScript + Ent_GetReselectionData;
1359 }
1360 return resume_offset;
1361}
1362
1363static inline void
1364NCR_700_clear_fifo(struct Scsi_Host *host) {
1365 const struct NCR_700_Host_Parameters *hostdata
1366 = (struct NCR_700_Host_Parameters *)host->hostdata[0];
1367 if(hostdata->chip710) {
1368 NCR_700_writeb(CLR_FIFO_710, host, CTEST8_REG);
1369 } else {
1370 NCR_700_writeb(CLR_FIFO, host, DFIFO_REG);
1371 }
1372}
1373
1374static inline void
1375NCR_700_flush_fifo(struct Scsi_Host *host) {
1376 const struct NCR_700_Host_Parameters *hostdata
1377 = (struct NCR_700_Host_Parameters *)host->hostdata[0];
1378 if(hostdata->chip710) {
1379 NCR_700_writeb(FLUSH_DMA_FIFO_710, host, CTEST8_REG);
1380 udelay(10);
1381 NCR_700_writeb(0, host, CTEST8_REG);
1382 } else {
1383 NCR_700_writeb(FLUSH_DMA_FIFO, host, DFIFO_REG);
1384 udelay(10);
1385 NCR_700_writeb(0, host, DFIFO_REG);
1386 }
1387}
1388
1389
1390/* The queue lock with interrupts disabled must be held on entry to
1391 * this function */
1392STATIC int
1393NCR_700_start_command(struct scsi_cmnd *SCp)
1394{
1395 struct NCR_700_command_slot *slot =
1396 (struct NCR_700_command_slot *)SCp->host_scribble;
1397 struct NCR_700_Host_Parameters *hostdata =
1398 (struct NCR_700_Host_Parameters *)SCp->device->host->hostdata[0];
1399 __u16 count = 1; /* for IDENTIFY message */
1400
1401 if(hostdata->state != NCR_700_HOST_FREE) {
1402 /* keep this inside the lock to close the race window where
1403 * the running command finishes on another CPU while we don't
1404 * change the state to queued on this one */
1405 slot->state = NCR_700_SLOT_QUEUED;
1406
1407 DEBUG(("scsi%d: host busy, queueing command %p, slot %p\n",
1408 SCp->device->host->host_no, slot->cmnd, slot));
1409 return 0;
1410 }
1411 hostdata->state = NCR_700_HOST_BUSY;
1412 hostdata->cmd = SCp;
1413 slot->state = NCR_700_SLOT_BUSY;
1414 /* keep interrupts disabled until we have the command correctly
1415 * set up so we cannot take a selection interrupt */
1416
1417 hostdata->msgout[0] = NCR_700_identify(SCp->cmnd[0] != REQUEST_SENSE,
1418 SCp->device->lun);
1419 /* for INQUIRY or REQUEST_SENSE commands, we cannot be sure
1420 * if the negotiated transfer parameters still hold, so
1421 * always renegotiate them */
1422 if(SCp->cmnd[0] == INQUIRY || SCp->cmnd[0] == REQUEST_SENSE) {
1423 NCR_700_clear_flag(SCp->device, NCR_700_DEV_NEGOTIATED_SYNC);
1424 }
1425
1426 /* REQUEST_SENSE is asking for contingent I_T_L(_Q) status.
1427 * If a contingent allegiance condition exists, the device
1428 * will refuse all tags, so send the request sense as untagged
1429 * */
Jeff Garzik422c0d62005-10-24 18:05:09 -04001430 if((hostdata->tag_negotiated & (1<<scmd_id(SCp)))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001431 && (slot->tag != SCSI_NO_TAG && SCp->cmnd[0] != REQUEST_SENSE)) {
1432 count += scsi_populate_tag_msg(SCp, &hostdata->msgout[count]);
1433 }
1434
1435 if(hostdata->fast &&
1436 NCR_700_is_flag_clear(SCp->device, NCR_700_DEV_NEGOTIATED_SYNC)) {
1437 memcpy(&hostdata->msgout[count], NCR_700_SDTR_msg,
1438 sizeof(NCR_700_SDTR_msg));
1439 hostdata->msgout[count+3] = spi_period(SCp->device->sdev_target);
1440 hostdata->msgout[count+4] = spi_offset(SCp->device->sdev_target);
1441 count += sizeof(NCR_700_SDTR_msg);
1442 NCR_700_set_flag(SCp->device, NCR_700_DEV_BEGIN_SYNC_NEGOTIATION);
1443 }
1444
1445 script_patch_16(hostdata->script, MessageCount, count);
1446
1447
1448 script_patch_ID(hostdata->script,
Jeff Garzik422c0d62005-10-24 18:05:09 -04001449 Device_ID, 1<<scmd_id(SCp));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001450
1451 script_patch_32_abs(hostdata->script, CommandAddress,
1452 slot->pCmd);
1453 script_patch_16(hostdata->script, CommandCount, SCp->cmd_len);
1454 /* finally plumb the beginning of the SG list into the script
1455 * */
1456 script_patch_32_abs(hostdata->script, SGScriptStartAddress,
1457 to32bit(&slot->pSG[0].ins));
1458 NCR_700_clear_fifo(SCp->device->host);
1459
1460 if(slot->resume_offset == 0)
1461 slot->resume_offset = hostdata->pScript;
1462 /* now perform all the writebacks and invalidates */
1463 dma_cache_sync(hostdata->msgout, count, DMA_TO_DEVICE);
1464 dma_cache_sync(hostdata->msgin, MSG_ARRAY_SIZE,
1465 DMA_FROM_DEVICE);
1466 dma_cache_sync(SCp->cmnd, SCp->cmd_len, DMA_TO_DEVICE);
1467 dma_cache_sync(hostdata->status, 1, DMA_FROM_DEVICE);
1468
1469 /* set the synchronous period/offset */
1470 NCR_700_writeb(NCR_700_get_SXFER(SCp->device),
1471 SCp->device->host, SXFER_REG);
1472 NCR_700_writel(slot->temp, SCp->device->host, TEMP_REG);
1473 NCR_700_writel(slot->resume_offset, SCp->device->host, DSP_REG);
1474
1475 return 1;
1476}
1477
1478irqreturn_t
1479NCR_700_intr(int irq, void *dev_id, struct pt_regs *regs)
1480{
1481 struct Scsi_Host *host = (struct Scsi_Host *)dev_id;
1482 struct NCR_700_Host_Parameters *hostdata =
1483 (struct NCR_700_Host_Parameters *)host->hostdata[0];
1484 __u8 istat;
1485 __u32 resume_offset = 0;
1486 __u8 pun = 0xff, lun = 0xff;
1487 unsigned long flags;
1488 int handled = 0;
1489
1490 /* Use the host lock to serialise acess to the 53c700
1491 * hardware. Note: In future, we may need to take the queue
1492 * lock to enter the done routines. When that happens, we
1493 * need to ensure that for this driver, the host lock and the
1494 * queue lock point to the same thing. */
1495 spin_lock_irqsave(host->host_lock, flags);
1496 if((istat = NCR_700_readb(host, ISTAT_REG))
1497 & (SCSI_INT_PENDING | DMA_INT_PENDING)) {
1498 __u32 dsps;
1499 __u8 sstat0 = 0, dstat = 0;
1500 __u32 dsp;
1501 struct scsi_cmnd *SCp = hostdata->cmd;
1502 enum NCR_700_Host_State state;
1503
1504 handled = 1;
1505 state = hostdata->state;
1506 SCp = hostdata->cmd;
1507
1508 if(istat & SCSI_INT_PENDING) {
1509 udelay(10);
1510
1511 sstat0 = NCR_700_readb(host, SSTAT0_REG);
1512 }
1513
1514 if(istat & DMA_INT_PENDING) {
1515 udelay(10);
1516
1517 dstat = NCR_700_readb(host, DSTAT_REG);
1518 }
1519
1520 dsps = NCR_700_readl(host, DSPS_REG);
1521 dsp = NCR_700_readl(host, DSP_REG);
1522
1523 DEBUG(("scsi%d: istat %02x sstat0 %02x dstat %02x dsp %04x[%08x] dsps 0x%x\n",
1524 host->host_no, istat, sstat0, dstat,
1525 (dsp - (__u32)(hostdata->pScript))/4,
1526 dsp, dsps));
1527
1528 if(SCp != NULL) {
1529 pun = SCp->device->id;
1530 lun = SCp->device->lun;
1531 }
1532
1533 if(sstat0 & SCSI_RESET_DETECTED) {
1534 struct scsi_device *SDp;
1535 int i;
1536
1537 hostdata->state = NCR_700_HOST_BUSY;
1538
1539 printk(KERN_ERR "scsi%d: Bus Reset detected, executing command %p, slot %p, dsp %08x[%04x]\n",
1540 host->host_no, SCp, SCp == NULL ? NULL : SCp->host_scribble, dsp, dsp - hostdata->pScript);
1541
1542 scsi_report_bus_reset(host, 0);
1543
1544 /* clear all the negotiated parameters */
1545 __shost_for_each_device(SDp, host)
1546 SDp->hostdata = NULL;
1547
1548 /* clear all the slots and their pending commands */
1549 for(i = 0; i < NCR_700_COMMAND_SLOTS_PER_HOST; i++) {
1550 struct scsi_cmnd *SCp;
1551 struct NCR_700_command_slot *slot =
1552 &hostdata->slots[i];
1553
1554 if(slot->state == NCR_700_SLOT_FREE)
1555 continue;
1556
1557 SCp = slot->cmnd;
1558 printk(KERN_ERR " failing command because of reset, slot %p, cmnd %p\n",
1559 slot, SCp);
1560 free_slot(slot, hostdata);
1561 SCp->host_scribble = NULL;
1562 NCR_700_set_depth(SCp->device, 0);
1563 /* NOTE: deadlock potential here: we
1564 * rely on mid-layer guarantees that
1565 * scsi_done won't try to issue the
1566 * command again otherwise we'll
1567 * deadlock on the
1568 * hostdata->state_lock */
1569 SCp->result = DID_RESET << 16;
1570 SCp->scsi_done(SCp);
1571 }
1572 mdelay(25);
1573 NCR_700_chip_setup(host);
1574
1575 hostdata->state = NCR_700_HOST_FREE;
1576 hostdata->cmd = NULL;
1577 /* signal back if this was an eh induced reset */
1578 if(hostdata->eh_complete != NULL)
1579 complete(hostdata->eh_complete);
1580 goto out_unlock;
1581 } else if(sstat0 & SELECTION_TIMEOUT) {
1582 DEBUG(("scsi%d: (%d:%d) selection timeout\n",
1583 host->host_no, pun, lun));
1584 NCR_700_scsi_done(hostdata, SCp, DID_NO_CONNECT<<16);
1585 } else if(sstat0 & PHASE_MISMATCH) {
1586 struct NCR_700_command_slot *slot = (SCp == NULL) ? NULL :
1587 (struct NCR_700_command_slot *)SCp->host_scribble;
1588
1589 if(dsp == Ent_SendMessage + 8 + hostdata->pScript) {
1590 /* It wants to reply to some part of
1591 * our message */
1592#ifdef NCR_700_DEBUG
1593 __u32 temp = NCR_700_readl(host, TEMP_REG);
1594 int count = (hostdata->script[Ent_SendMessage/4] & 0xffffff) - ((NCR_700_readl(host, DBC_REG) & 0xffffff) + NCR_700_data_residual(host));
1595 printk("scsi%d (%d:%d) PHASE MISMATCH IN SEND MESSAGE %d remain, return %p[%04x], phase %s\n", host->host_no, pun, lun, count, (void *)temp, temp - hostdata->pScript, sbcl_to_string(NCR_700_readb(host, SBCL_REG)));
1596#endif
1597 resume_offset = hostdata->pScript + Ent_SendMessagePhaseMismatch;
1598 } else if(dsp >= to32bit(&slot->pSG[0].ins) &&
1599 dsp <= to32bit(&slot->pSG[NCR_700_SG_SEGMENTS].ins)) {
1600 int data_transfer = NCR_700_readl(host, DBC_REG) & 0xffffff;
1601 int SGcount = (dsp - to32bit(&slot->pSG[0].ins))/sizeof(struct NCR_700_SG_List);
1602 int residual = NCR_700_data_residual(host);
1603 int i;
1604#ifdef NCR_700_DEBUG
1605 __u32 naddr = NCR_700_readl(host, DNAD_REG);
1606
1607 printk("scsi%d: (%d:%d) Expected phase mismatch in slot->SG[%d], transferred 0x%x\n",
1608 host->host_no, pun, lun,
1609 SGcount, data_transfer);
1610 scsi_print_command(SCp);
1611 if(residual) {
1612 printk("scsi%d: (%d:%d) Expected phase mismatch in slot->SG[%d], transferred 0x%x, residual %d\n",
1613 host->host_no, pun, lun,
1614 SGcount, data_transfer, residual);
1615 }
1616#endif
1617 data_transfer += residual;
1618
1619 if(data_transfer != 0) {
1620 int count;
1621 __u32 pAddr;
1622
1623 SGcount--;
1624
1625 count = (bS_to_cpu(slot->SG[SGcount].ins) & 0x00ffffff);
1626 DEBUG(("DATA TRANSFER MISMATCH, count = %d, transferred %d\n", count, count-data_transfer));
1627 slot->SG[SGcount].ins &= bS_to_host(0xff000000);
1628 slot->SG[SGcount].ins |= bS_to_host(data_transfer);
1629 pAddr = bS_to_cpu(slot->SG[SGcount].pAddr);
1630 pAddr += (count - data_transfer);
1631#ifdef NCR_700_DEBUG
1632 if(pAddr != naddr) {
1633 printk("scsi%d (%d:%d) transfer mismatch pAddr=%lx, naddr=%lx, data_transfer=%d, residual=%d\n", host->host_no, pun, lun, (unsigned long)pAddr, (unsigned long)naddr, data_transfer, residual);
1634 }
1635#endif
1636 slot->SG[SGcount].pAddr = bS_to_host(pAddr);
1637 }
1638 /* set the executed moves to nops */
1639 for(i=0; i<SGcount; i++) {
1640 slot->SG[i].ins = bS_to_host(SCRIPT_NOP);
1641 slot->SG[i].pAddr = 0;
1642 }
1643 dma_cache_sync(slot->SG, sizeof(slot->SG), DMA_TO_DEVICE);
1644 /* and pretend we disconnected after
1645 * the command phase */
1646 resume_offset = hostdata->pScript + Ent_MsgInDuringData;
1647 /* make sure all the data is flushed */
1648 NCR_700_flush_fifo(host);
1649 } else {
1650 __u8 sbcl = NCR_700_readb(host, SBCL_REG);
1651 printk(KERN_ERR "scsi%d: (%d:%d) phase mismatch at %04x, phase %s\n",
1652 host->host_no, pun, lun, dsp - hostdata->pScript, sbcl_to_string(sbcl));
1653 NCR_700_internal_bus_reset(host);
1654 }
1655
1656 } else if(sstat0 & SCSI_GROSS_ERROR) {
1657 printk(KERN_ERR "scsi%d: (%d:%d) GROSS ERROR\n",
1658 host->host_no, pun, lun);
1659 NCR_700_scsi_done(hostdata, SCp, DID_ERROR<<16);
1660 } else if(sstat0 & PARITY_ERROR) {
1661 printk(KERN_ERR "scsi%d: (%d:%d) PARITY ERROR\n",
1662 host->host_no, pun, lun);
1663 NCR_700_scsi_done(hostdata, SCp, DID_ERROR<<16);
1664 } else if(dstat & SCRIPT_INT_RECEIVED) {
1665 DEBUG(("scsi%d: (%d:%d) ====>SCRIPT INTERRUPT<====\n",
1666 host->host_no, pun, lun));
1667 resume_offset = process_script_interrupt(dsps, dsp, SCp, host, hostdata);
1668 } else if(dstat & (ILGL_INST_DETECTED)) {
1669 printk(KERN_ERR "scsi%d: (%d:%d) Illegal Instruction detected at 0x%08x[0x%x]!!!\n"
1670 " Please email James.Bottomley@HansenPartnership.com with the details\n",
1671 host->host_no, pun, lun,
1672 dsp, dsp - hostdata->pScript);
1673 NCR_700_scsi_done(hostdata, SCp, DID_ERROR<<16);
1674 } else if(dstat & (WATCH_DOG_INTERRUPT|ABORTED)) {
1675 printk(KERN_ERR "scsi%d: (%d:%d) serious DMA problem, dstat=%02x\n",
1676 host->host_no, pun, lun, dstat);
1677 NCR_700_scsi_done(hostdata, SCp, DID_ERROR<<16);
1678 }
1679
1680
1681 /* NOTE: selection interrupt processing MUST occur
1682 * after script interrupt processing to correctly cope
1683 * with the case where we process a disconnect and
1684 * then get reselected before we process the
1685 * disconnection */
1686 if(sstat0 & SELECTED) {
1687 /* FIXME: It currently takes at least FOUR
1688 * interrupts to complete a command that
1689 * disconnects: one for the disconnect, one
1690 * for the reselection, one to get the
1691 * reselection data and one to complete the
1692 * command. If we guess the reselected
1693 * command here and prepare it, we only need
1694 * to get a reselection data interrupt if we
1695 * guessed wrongly. Since the interrupt
1696 * overhead is much greater than the command
1697 * setup, this would be an efficient
1698 * optimisation particularly as we probably
1699 * only have one outstanding command on a
1700 * target most of the time */
1701
1702 resume_offset = process_selection(host, dsp);
1703
1704 }
1705
1706 }
1707
1708 if(resume_offset) {
1709 if(hostdata->state != NCR_700_HOST_BUSY) {
1710 printk(KERN_ERR "scsi%d: Driver error: resume at 0x%08x [0x%04x] with non busy host!\n",
1711 host->host_no, resume_offset, resume_offset - hostdata->pScript);
1712 hostdata->state = NCR_700_HOST_BUSY;
1713 }
1714
1715 DEBUG(("Attempting to resume at %x\n", resume_offset));
1716 NCR_700_clear_fifo(host);
1717 NCR_700_writel(resume_offset, host, DSP_REG);
1718 }
1719 /* There is probably a technical no-no about this: If we're a
1720 * shared interrupt and we got this interrupt because the
1721 * other device needs servicing not us, we're still going to
1722 * check our queued commands here---of course, there shouldn't
1723 * be any outstanding.... */
1724 if(hostdata->state == NCR_700_HOST_FREE) {
1725 int i;
1726
1727 for(i = 0; i < NCR_700_COMMAND_SLOTS_PER_HOST; i++) {
1728 /* fairness: always run the queue from the last
1729 * position we left off */
1730 int j = (i + hostdata->saved_slot_position)
1731 % NCR_700_COMMAND_SLOTS_PER_HOST;
1732
1733 if(hostdata->slots[j].state != NCR_700_SLOT_QUEUED)
1734 continue;
1735 if(NCR_700_start_command(hostdata->slots[j].cmnd)) {
1736 DEBUG(("scsi%d: Issuing saved command slot %p, cmd %p\t\n",
1737 host->host_no, &hostdata->slots[j],
1738 hostdata->slots[j].cmnd));
1739 hostdata->saved_slot_position = j + 1;
1740 }
1741
1742 break;
1743 }
1744 }
1745 out_unlock:
1746 spin_unlock_irqrestore(host->host_lock, flags);
1747 return IRQ_RETVAL(handled);
1748}
1749
1750STATIC int
1751NCR_700_queuecommand(struct scsi_cmnd *SCp, void (*done)(struct scsi_cmnd *))
1752{
1753 struct NCR_700_Host_Parameters *hostdata =
1754 (struct NCR_700_Host_Parameters *)SCp->device->host->hostdata[0];
1755 __u32 move_ins;
1756 enum dma_data_direction direction;
1757 struct NCR_700_command_slot *slot;
1758
1759 if(hostdata->command_slot_count >= NCR_700_COMMAND_SLOTS_PER_HOST) {
1760 /* We're over our allocation, this should never happen
1761 * since we report the max allocation to the mid layer */
1762 printk(KERN_WARNING "scsi%d: Command depth has gone over queue depth\n", SCp->device->host->host_no);
1763 return 1;
1764 }
1765 /* check for untagged commands. We cannot have any outstanding
1766 * commands if we accept them. Commands could be untagged because:
1767 *
1768 * - The tag negotiated bitmap is clear
1769 * - The blk layer sent and untagged command
1770 */
1771 if(NCR_700_get_depth(SCp->device) != 0
Jeff Garzik017560f2005-10-24 18:04:36 -04001772 && (!(hostdata->tag_negotiated & (1<<scmd_id(SCp)))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001773 || !blk_rq_tagged(SCp->request))) {
Jeff Garzik017560f2005-10-24 18:04:36 -04001774 CDEBUG(KERN_ERR, SCp, "has non zero depth %d\n",
1775 NCR_700_get_depth(SCp->device));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001776 return SCSI_MLQUEUE_DEVICE_BUSY;
1777 }
1778 if(NCR_700_get_depth(SCp->device) >= SCp->device->queue_depth) {
Jeff Garzik017560f2005-10-24 18:04:36 -04001779 CDEBUG(KERN_ERR, SCp, "has max tag depth %d\n",
1780 NCR_700_get_depth(SCp->device));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001781 return SCSI_MLQUEUE_DEVICE_BUSY;
1782 }
1783 NCR_700_set_depth(SCp->device, NCR_700_get_depth(SCp->device) + 1);
1784
1785 /* begin the command here */
1786 /* no need to check for NULL, test for command_slot_count above
1787 * ensures a slot is free */
1788 slot = find_empty_slot(hostdata);
1789
1790 slot->cmnd = SCp;
1791
1792 SCp->scsi_done = done;
1793 SCp->host_scribble = (unsigned char *)slot;
1794 SCp->SCp.ptr = NULL;
1795 SCp->SCp.buffer = NULL;
1796
1797#ifdef NCR_700_DEBUG
1798 printk("53c700: scsi%d, command ", SCp->device->host->host_no);
1799 scsi_print_command(SCp);
1800#endif
1801 if(blk_rq_tagged(SCp->request)
Jeff Garzik017560f2005-10-24 18:04:36 -04001802 && (hostdata->tag_negotiated &(1<<scmd_id(SCp))) == 0
Linus Torvalds1da177e2005-04-16 15:20:36 -07001803 && NCR_700_get_tag_neg_state(SCp->device) == NCR_700_START_TAG_NEGOTIATION) {
Jeff Garzik017560f2005-10-24 18:04:36 -04001804 scmd_printk(KERN_ERR, SCp, "Enabling Tag Command Queuing\n");
1805 hostdata->tag_negotiated |= (1<<scmd_id(SCp));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001806 NCR_700_set_tag_neg_state(SCp->device, NCR_700_DURING_TAG_NEGOTIATION);
1807 }
1808
1809 /* here we may have to process an untagged command. The gate
1810 * above ensures that this will be the only one outstanding,
1811 * so clear the tag negotiated bit.
1812 *
1813 * FIXME: This will royally screw up on multiple LUN devices
1814 * */
1815 if(!blk_rq_tagged(SCp->request)
Jeff Garzik017560f2005-10-24 18:04:36 -04001816 && (hostdata->tag_negotiated &(1<<scmd_id(SCp)))) {
1817 scmd_printk(KERN_INFO, SCp, "Disabling Tag Command Queuing\n");
1818 hostdata->tag_negotiated &= ~(1<<scmd_id(SCp));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001819 }
1820
Jeff Garzik017560f2005-10-24 18:04:36 -04001821 if((hostdata->tag_negotiated &(1<<scmd_id(SCp)))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001822 && scsi_get_tag_type(SCp->device)) {
1823 slot->tag = SCp->request->tag;
Jeff Garzik017560f2005-10-24 18:04:36 -04001824 CDEBUG(KERN_DEBUG, SCp, "sending out tag %d, slot %p\n",
1825 slot->tag, slot);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001826 } else {
1827 slot->tag = SCSI_NO_TAG;
1828 /* must populate current_cmnd for scsi_find_tag to work */
1829 SCp->device->current_cmnd = SCp;
1830 }
1831 /* sanity check: some of the commands generated by the mid-layer
1832 * have an eccentric idea of their sc_data_direction */
1833 if(!SCp->use_sg && !SCp->request_bufflen
1834 && SCp->sc_data_direction != DMA_NONE) {
1835#ifdef NCR_700_DEBUG
1836 printk("53c700: Command");
1837 scsi_print_command(SCp);
1838 printk("Has wrong data direction %d\n", SCp->sc_data_direction);
1839#endif
1840 SCp->sc_data_direction = DMA_NONE;
1841 }
1842
1843 switch (SCp->cmnd[0]) {
1844 case REQUEST_SENSE:
1845 /* clear the internal sense magic */
1846 SCp->cmnd[6] = 0;
1847 /* fall through */
1848 default:
1849 /* OK, get it from the command */
1850 switch(SCp->sc_data_direction) {
1851 case DMA_BIDIRECTIONAL:
1852 default:
1853 printk(KERN_ERR "53c700: Unknown command for data direction ");
1854 scsi_print_command(SCp);
1855
1856 move_ins = 0;
1857 break;
1858 case DMA_NONE:
1859 move_ins = 0;
1860 break;
1861 case DMA_FROM_DEVICE:
1862 move_ins = SCRIPT_MOVE_DATA_IN;
1863 break;
1864 case DMA_TO_DEVICE:
1865 move_ins = SCRIPT_MOVE_DATA_OUT;
1866 break;
1867 }
1868 }
1869
1870 /* now build the scatter gather list */
1871 direction = SCp->sc_data_direction;
1872 if(move_ins != 0) {
1873 int i;
1874 int sg_count;
1875 dma_addr_t vPtr = 0;
1876 __u32 count = 0;
1877
1878 if(SCp->use_sg) {
1879 sg_count = dma_map_sg(hostdata->dev, SCp->buffer,
1880 SCp->use_sg, direction);
1881 } else {
1882 vPtr = dma_map_single(hostdata->dev,
1883 SCp->request_buffer,
1884 SCp->request_bufflen,
1885 direction);
1886 count = SCp->request_bufflen;
1887 slot->dma_handle = vPtr;
1888 sg_count = 1;
1889 }
1890
1891
1892 for(i = 0; i < sg_count; i++) {
1893
1894 if(SCp->use_sg) {
1895 struct scatterlist *sg = SCp->buffer;
1896
1897 vPtr = sg_dma_address(&sg[i]);
1898 count = sg_dma_len(&sg[i]);
1899 }
1900
1901 slot->SG[i].ins = bS_to_host(move_ins | count);
1902 DEBUG((" scatter block %d: move %d[%08x] from 0x%lx\n",
1903 i, count, slot->SG[i].ins, (unsigned long)vPtr));
1904 slot->SG[i].pAddr = bS_to_host(vPtr);
1905 }
1906 slot->SG[i].ins = bS_to_host(SCRIPT_RETURN);
1907 slot->SG[i].pAddr = 0;
1908 dma_cache_sync(slot->SG, sizeof(slot->SG), DMA_TO_DEVICE);
1909 DEBUG((" SETTING %08lx to %x\n",
1910 (&slot->pSG[i].ins),
1911 slot->SG[i].ins));
1912 }
1913 slot->resume_offset = 0;
1914 slot->pCmd = dma_map_single(hostdata->dev, SCp->cmnd,
1915 sizeof(SCp->cmnd), DMA_TO_DEVICE);
1916 NCR_700_start_command(SCp);
1917 return 0;
1918}
1919
1920STATIC int
1921NCR_700_abort(struct scsi_cmnd * SCp)
1922{
1923 struct NCR_700_command_slot *slot;
1924
Jeff Garzik017560f2005-10-24 18:04:36 -04001925 scmd_printk(KERN_INFO, SCp,
1926 "New error handler wants to abort command\n\t");
Linus Torvalds1da177e2005-04-16 15:20:36 -07001927 scsi_print_command(SCp);
1928
1929 slot = (struct NCR_700_command_slot *)SCp->host_scribble;
1930
1931 if(slot == NULL)
1932 /* no outstanding command to abort */
1933 return SUCCESS;
1934 if(SCp->cmnd[0] == TEST_UNIT_READY) {
1935 /* FIXME: This is because of a problem in the new
1936 * error handler. When it is in error recovery, it
1937 * will send a TUR to a device it thinks may still be
1938 * showing a problem. If the TUR isn't responded to,
1939 * it will abort it and mark the device off line.
1940 * Unfortunately, it does no other error recovery, so
1941 * this would leave us with an outstanding command
1942 * occupying a slot. Rather than allow this to
1943 * happen, we issue a bus reset to force all
1944 * outstanding commands to terminate here. */
1945 NCR_700_internal_bus_reset(SCp->device->host);
1946 /* still drop through and return failed */
1947 }
1948 return FAILED;
1949
1950}
1951
1952STATIC int
1953NCR_700_bus_reset(struct scsi_cmnd * SCp)
1954{
1955 DECLARE_COMPLETION(complete);
1956 struct NCR_700_Host_Parameters *hostdata =
1957 (struct NCR_700_Host_Parameters *)SCp->device->host->hostdata[0];
1958
Jeff Garzik017560f2005-10-24 18:04:36 -04001959 scmd_printk(KERN_INFO, SCp,
1960 "New error handler wants BUS reset, cmd %p\n\t", SCp);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001961 scsi_print_command(SCp);
Jeff Garzik 68b3aa72005-05-28 07:56:31 -04001962
Linus Torvalds1da177e2005-04-16 15:20:36 -07001963 /* In theory, eh_complete should always be null because the
1964 * eh is single threaded, but just in case we're handling a
1965 * reset via sg or something */
Jeff Garzik 68b3aa72005-05-28 07:56:31 -04001966 spin_lock_irq(SCp->device->host->host_lock);
1967 while (hostdata->eh_complete != NULL) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001968 spin_unlock_irq(SCp->device->host->host_lock);
1969 msleep_interruptible(100);
1970 spin_lock_irq(SCp->device->host->host_lock);
1971 }
Jeff Garzik 68b3aa72005-05-28 07:56:31 -04001972
Linus Torvalds1da177e2005-04-16 15:20:36 -07001973 hostdata->eh_complete = &complete;
1974 NCR_700_internal_bus_reset(SCp->device->host);
Jeff Garzik 68b3aa72005-05-28 07:56:31 -04001975
Linus Torvalds1da177e2005-04-16 15:20:36 -07001976 spin_unlock_irq(SCp->device->host->host_lock);
1977 wait_for_completion(&complete);
1978 spin_lock_irq(SCp->device->host->host_lock);
Jeff Garzik 68b3aa72005-05-28 07:56:31 -04001979
Linus Torvalds1da177e2005-04-16 15:20:36 -07001980 hostdata->eh_complete = NULL;
1981 /* Revalidate the transport parameters of the failing device */
1982 if(hostdata->fast)
1983 spi_schedule_dv_device(SCp->device);
Jeff Garzik 68b3aa72005-05-28 07:56:31 -04001984
1985 spin_unlock_irq(SCp->device->host->host_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001986 return SUCCESS;
1987}
1988
1989STATIC int
Linus Torvalds1da177e2005-04-16 15:20:36 -07001990NCR_700_host_reset(struct scsi_cmnd * SCp)
1991{
Jeff Garzik017560f2005-10-24 18:04:36 -04001992 scmd_printk(KERN_INFO, SCp, "New error handler wants HOST reset\n\t");
Linus Torvalds1da177e2005-04-16 15:20:36 -07001993 scsi_print_command(SCp);
1994
Jeff Garzik df0ae242005-05-28 07:57:14 -04001995 spin_lock_irq(SCp->device->host->host_lock);
1996
Linus Torvalds1da177e2005-04-16 15:20:36 -07001997 NCR_700_internal_bus_reset(SCp->device->host);
1998 NCR_700_chip_reset(SCp->device->host);
Jeff Garzik df0ae242005-05-28 07:57:14 -04001999
2000 spin_unlock_irq(SCp->device->host->host_lock);
2001
Linus Torvalds1da177e2005-04-16 15:20:36 -07002002 return SUCCESS;
2003}
2004
2005STATIC void
2006NCR_700_set_period(struct scsi_target *STp, int period)
2007{
2008 struct Scsi_Host *SHp = dev_to_shost(STp->dev.parent);
2009 struct NCR_700_Host_Parameters *hostdata =
2010 (struct NCR_700_Host_Parameters *)SHp->hostdata[0];
2011
2012 if(!hostdata->fast)
2013 return;
2014
2015 if(period < hostdata->min_period)
2016 period = hostdata->min_period;
2017
2018 spi_period(STp) = period;
2019 spi_flags(STp) &= ~(NCR_700_DEV_NEGOTIATED_SYNC |
2020 NCR_700_DEV_BEGIN_SYNC_NEGOTIATION);
2021 spi_flags(STp) |= NCR_700_DEV_PRINT_SYNC_NEGOTIATION;
2022}
2023
2024STATIC void
2025NCR_700_set_offset(struct scsi_target *STp, int offset)
2026{
2027 struct Scsi_Host *SHp = dev_to_shost(STp->dev.parent);
2028 struct NCR_700_Host_Parameters *hostdata =
2029 (struct NCR_700_Host_Parameters *)SHp->hostdata[0];
2030 int max_offset = hostdata->chip710
2031 ? NCR_710_MAX_OFFSET : NCR_700_MAX_OFFSET;
2032
2033 if(!hostdata->fast)
2034 return;
2035
2036 if(offset > max_offset)
2037 offset = max_offset;
2038
2039 /* if we're currently async, make sure the period is reasonable */
2040 if(spi_offset(STp) == 0 && (spi_period(STp) < hostdata->min_period ||
2041 spi_period(STp) > 0xff))
2042 spi_period(STp) = hostdata->min_period;
2043
2044 spi_offset(STp) = offset;
2045 spi_flags(STp) &= ~(NCR_700_DEV_NEGOTIATED_SYNC |
2046 NCR_700_DEV_BEGIN_SYNC_NEGOTIATION);
2047 spi_flags(STp) |= NCR_700_DEV_PRINT_SYNC_NEGOTIATION;
2048}
2049
2050
2051
2052STATIC int
2053NCR_700_slave_configure(struct scsi_device *SDp)
2054{
2055 struct NCR_700_Host_Parameters *hostdata =
2056 (struct NCR_700_Host_Parameters *)SDp->host->hostdata[0];
2057
2058 /* to do here: allocate memory; build a queue_full list */
2059 if(SDp->tagged_supported) {
2060 scsi_set_tag_type(SDp, MSG_ORDERED_TAG);
2061 scsi_activate_tcq(SDp, NCR_700_DEFAULT_TAGS);
2062 NCR_700_set_tag_neg_state(SDp, NCR_700_START_TAG_NEGOTIATION);
2063 } else {
2064 /* initialise to default depth */
2065 scsi_adjust_queue_depth(SDp, 0, SDp->host->cmd_per_lun);
2066 }
2067 if(hostdata->fast) {
2068 /* Find the correct offset and period via domain validation */
2069 if (!spi_initial_dv(SDp->sdev_target))
2070 spi_dv_device(SDp);
2071 } else {
2072 spi_offset(SDp->sdev_target) = 0;
2073 spi_period(SDp->sdev_target) = 0;
2074 }
2075 return 0;
2076}
2077
2078STATIC void
2079NCR_700_slave_destroy(struct scsi_device *SDp)
2080{
2081 /* to do here: deallocate memory */
2082}
2083
2084static int
2085NCR_700_change_queue_depth(struct scsi_device *SDp, int depth)
2086{
2087 if (depth > NCR_700_MAX_TAGS)
2088 depth = NCR_700_MAX_TAGS;
2089
2090 scsi_adjust_queue_depth(SDp, scsi_get_tag_type(SDp), depth);
2091 return depth;
2092}
2093
2094static int NCR_700_change_queue_type(struct scsi_device *SDp, int tag_type)
2095{
2096 int change_tag = ((tag_type ==0 && scsi_get_tag_type(SDp) != 0)
2097 || (tag_type != 0 && scsi_get_tag_type(SDp) == 0));
2098 struct NCR_700_Host_Parameters *hostdata =
2099 (struct NCR_700_Host_Parameters *)SDp->host->hostdata[0];
2100
2101 scsi_set_tag_type(SDp, tag_type);
2102
2103 /* We have a global (per target) flag to track whether TCQ is
2104 * enabled, so we'll be turning it off for the entire target here.
2105 * our tag algorithm will fail if we mix tagged and untagged commands,
2106 * so quiesce the device before doing this */
2107 if (change_tag)
2108 scsi_target_quiesce(SDp->sdev_target);
2109
2110 if (!tag_type) {
2111 /* shift back to the default unqueued number of commands
2112 * (the user can still raise this) */
2113 scsi_deactivate_tcq(SDp, SDp->host->cmd_per_lun);
Jeff Garzik422c0d62005-10-24 18:05:09 -04002114 hostdata->tag_negotiated &= ~(1 << sdev_id(SDp));
Linus Torvalds1da177e2005-04-16 15:20:36 -07002115 } else {
2116 /* Here, we cleared the negotiation flag above, so this
2117 * will force the driver to renegotiate */
2118 scsi_activate_tcq(SDp, SDp->queue_depth);
2119 if (change_tag)
2120 NCR_700_set_tag_neg_state(SDp, NCR_700_START_TAG_NEGOTIATION);
2121 }
2122 if (change_tag)
2123 scsi_target_resume(SDp->sdev_target);
2124
2125 return tag_type;
2126}
2127
2128static ssize_t
Yani Ioannou10523b32005-05-17 06:43:37 -04002129NCR_700_show_active_tags(struct device *dev, struct device_attribute *attr, char *buf)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002130{
2131 struct scsi_device *SDp = to_scsi_device(dev);
2132
2133 return snprintf(buf, 20, "%d\n", NCR_700_get_depth(SDp));
2134}
2135
2136static struct device_attribute NCR_700_active_tags_attr = {
2137 .attr = {
2138 .name = "active_tags",
2139 .mode = S_IRUGO,
2140 },
2141 .show = NCR_700_show_active_tags,
2142};
2143
2144STATIC struct device_attribute *NCR_700_dev_attrs[] = {
2145 &NCR_700_active_tags_attr,
2146 NULL,
2147};
2148
2149EXPORT_SYMBOL(NCR_700_detect);
2150EXPORT_SYMBOL(NCR_700_release);
2151EXPORT_SYMBOL(NCR_700_intr);
2152
2153static struct spi_function_template NCR_700_transport_functions = {
2154 .set_period = NCR_700_set_period,
2155 .show_period = 1,
2156 .set_offset = NCR_700_set_offset,
2157 .show_offset = 1,
2158};
2159
2160static int __init NCR_700_init(void)
2161{
2162 NCR_700_transport_template = spi_attach_transport(&NCR_700_transport_functions);
2163 if(!NCR_700_transport_template)
2164 return -ENODEV;
2165 return 0;
2166}
2167
2168static void __exit NCR_700_exit(void)
2169{
2170 spi_release_transport(NCR_700_transport_template);
2171}
2172
2173module_init(NCR_700_init);
2174module_exit(NCR_700_exit);
2175