blob: 000a78e5246c5c1d9f510fcfbbfc9cf35700137a [file] [log] [blame]
Stanislaw Gruszka6e5f1e12009-03-05 16:10:58 +01001/*
2 * IDE host driver for AT91 (SAM9, CAP9, AT572D940HF) Static Memory Controller
3 * with Compact Flash True IDE logic
4 *
5 * Copyright (c) 2008, 2009 Kelvatek Ltd.
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20 *
21 */
22
Stanislaw Gruszka6e5f1e12009-03-05 16:10:58 +010023#include <linux/kernel.h>
24#include <linux/module.h>
25#include <linux/clk.h>
26#include <linux/err.h>
27#include <linux/ide.h>
28#include <linux/platform_device.h>
29
30#include <mach/board.h>
31#include <mach/gpio.h>
Stanislaw Gruszka6e5f1e12009-03-05 16:10:58 +010032#include <mach/at91sam9_smc.h>
Stanislaw Gruszka6e5f1e12009-03-05 16:10:58 +010033
34#define DRV_NAME "at91_ide"
35
36#define perr(fmt, args...) pr_err(DRV_NAME ": " fmt, ##args)
37#define pdbg(fmt, args...) pr_debug("%s " fmt, __func__, ##args)
38
39/*
40 * Access to IDE device is possible through EBI Static Memory Controller
41 * with Compact Flash logic. For details see EBI and SMC datasheet sections
42 * of any microcontroller from AT91SAM9 family.
43 *
44 * Within SMC chip select address space, lines A[23:21] distinguish Compact
45 * Flash modes (I/O, common memory, attribute memory, True IDE). IDE modes are:
46 * 0x00c0000 - True IDE
47 * 0x00e0000 - Alternate True IDE (Alt Status Register)
48 *
49 * On True IDE mode Task File and Data Register are mapped at the same address.
50 * To distinguish access between these two different bus data width is used:
51 * 8Bit for Task File, 16Bit for Data I/O.
52 *
53 * After initialization we do 8/16 bit flipping (changes in SMC MODE register)
54 * only inside IDE callback routines which are serialized by IDE layer,
55 * so no additional locking needed.
56 */
57
58#define TASK_FILE 0x00c00000
59#define ALT_MODE 0x00e00000
60#define REGS_SIZE 8
61
62#define enter_16bit(cs, mode) do { \
63 mode = at91_sys_read(AT91_SMC_MODE(cs)); \
64 at91_sys_write(AT91_SMC_MODE(cs), mode | AT91_SMC_DBW_16); \
65} while (0)
66
67#define leave_16bit(cs, mode) at91_sys_write(AT91_SMC_MODE(cs), mode);
68
69static void set_smc_timings(const u8 chipselect, const u16 cycle,
70 const u16 setup, const u16 pulse,
71 const u16 data_float, int use_iordy)
72{
73 unsigned long mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
74 AT91_SMC_BAT_SELECT;
75
76 /* disable or enable waiting for IORDY signal */
77 if (use_iordy)
78 mode |= AT91_SMC_EXNWMODE_READY;
79
80 /* add data float cycles if needed */
81 if (data_float)
82 mode |= AT91_SMC_TDF_(data_float);
83
84 at91_sys_write(AT91_SMC_MODE(chipselect), mode);
85
86 /* setup timings in SMC */
87 at91_sys_write(AT91_SMC_SETUP(chipselect), AT91_SMC_NWESETUP_(setup) |
88 AT91_SMC_NCS_WRSETUP_(0) |
89 AT91_SMC_NRDSETUP_(setup) |
90 AT91_SMC_NCS_RDSETUP_(0));
91 at91_sys_write(AT91_SMC_PULSE(chipselect), AT91_SMC_NWEPULSE_(pulse) |
92 AT91_SMC_NCS_WRPULSE_(cycle) |
93 AT91_SMC_NRDPULSE_(pulse) |
94 AT91_SMC_NCS_RDPULSE_(cycle));
95 at91_sys_write(AT91_SMC_CYCLE(chipselect), AT91_SMC_NWECYCLE_(cycle) |
96 AT91_SMC_NRDCYCLE_(cycle));
97}
98
99static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz)
100{
101 u64 tmp = ns;
102
103 tmp *= mck_hz;
104 tmp += 1000*1000*1000 - 1; /* round up */
105 do_div(tmp, 1000*1000*1000);
106 return (unsigned int) tmp;
107}
108
109static void apply_timings(const u8 chipselect, const u8 pio,
110 const struct ide_timing *timing, int use_iordy)
111{
112 unsigned int t0, t1, t2, t6z;
113 unsigned int cycle, setup, pulse, data_float;
114 unsigned int mck_hz;
115 struct clk *mck;
116
117 /* see table 22 of Compact Flash standard 4.1 for the meaning,
118 * we do not stretch active (t2) time, so setup (t1) + hold time (th)
119 * assure at least minimal recovery (t2i) time */
120 t0 = timing->cyc8b;
121 t1 = timing->setup;
122 t2 = timing->act8b;
123 t6z = (pio < 5) ? 30 : 20;
124
125 pdbg("t0=%u t1=%u t2=%u t6z=%u\n", t0, t1, t2, t6z);
126
127 mck = clk_get(NULL, "mck");
128 BUG_ON(IS_ERR(mck));
129 mck_hz = clk_get_rate(mck);
130 pdbg("mck_hz=%u\n", mck_hz);
131
132 cycle = calc_mck_cycles(t0, mck_hz);
133 setup = calc_mck_cycles(t1, mck_hz);
134 pulse = calc_mck_cycles(t2, mck_hz);
135 data_float = calc_mck_cycles(t6z, mck_hz);
136
137 pdbg("cycle=%u setup=%u pulse=%u data_float=%u\n",
138 cycle, setup, pulse, data_float);
139
140 set_smc_timings(chipselect, cycle, setup, pulse, data_float, use_iordy);
141}
142
Bartlomiej Zolnierkiewiczadb1af92009-03-27 12:46:38 +0100143static void at91_ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
Stanislaw Gruszka6e5f1e12009-03-05 16:10:58 +0100144 void *buf, unsigned int len)
145{
146 ide_hwif_t *hwif = drive->hwif;
147 struct ide_io_ports *io_ports = &hwif->io_ports;
148 u8 chipselect = hwif->select_data;
149 unsigned long mode;
150
151 pdbg("cs %u buf %p len %d\n", chipselect, buf, len);
152
153 len++;
154
155 enter_16bit(chipselect, mode);
Bartlomiej Zolnierkiewicz443d18c2009-03-27 12:46:24 +0100156 readsw((void __iomem *)io_ports->data_addr, buf, len / 2);
Stanislaw Gruszka6e5f1e12009-03-05 16:10:58 +0100157 leave_16bit(chipselect, mode);
158}
159
Bartlomiej Zolnierkiewiczadb1af92009-03-27 12:46:38 +0100160static void at91_ide_output_data(ide_drive_t *drive, struct ide_cmd *cmd,
Stanislaw Gruszka6e5f1e12009-03-05 16:10:58 +0100161 void *buf, unsigned int len)
162{
163 ide_hwif_t *hwif = drive->hwif;
164 struct ide_io_ports *io_ports = &hwif->io_ports;
165 u8 chipselect = hwif->select_data;
166 unsigned long mode;
167
168 pdbg("cs %u buf %p len %d\n", chipselect, buf, len);
169
170 enter_16bit(chipselect, mode);
Bartlomiej Zolnierkiewicz443d18c2009-03-27 12:46:24 +0100171 writesw((void __iomem *)io_ports->data_addr, buf, len / 2);
Stanislaw Gruszka6e5f1e12009-03-05 16:10:58 +0100172 leave_16bit(chipselect, mode);
173}
174
Bartlomiej Zolnierkiewicze085b3c2010-01-19 01:44:41 -0800175static void at91_ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
Stanislaw Gruszka6e5f1e12009-03-05 16:10:58 +0100176{
177 struct ide_timing *timing;
Bartlomiej Zolnierkiewicze085b3c2010-01-19 01:44:41 -0800178 u8 chipselect = hwif->select_data;
Stanislaw Gruszka6e5f1e12009-03-05 16:10:58 +0100179 int use_iordy = 0;
Bartlomiej Zolnierkiewicze085b3c2010-01-19 01:44:41 -0800180 const u8 pio = drive->pio_mode - XFER_PIO_0;
Stanislaw Gruszka6e5f1e12009-03-05 16:10:58 +0100181
182 pdbg("chipselect %u pio %u\n", chipselect, pio);
183
184 timing = ide_timing_find_mode(XFER_PIO_0 + pio);
185 BUG_ON(!timing);
186
Bartlomiej Zolnierkiewiczc9ef59f2009-06-15 18:52:53 +0200187 if (ide_pio_need_iordy(drive, pio))
Stanislaw Gruszka6e5f1e12009-03-05 16:10:58 +0100188 use_iordy = 1;
189
190 apply_timings(chipselect, pio, timing, use_iordy);
191}
192
193static const struct ide_tp_ops at91_ide_tp_ops = {
194 .exec_command = ide_exec_command,
195 .read_status = ide_read_status,
196 .read_altstatus = ide_read_altstatus,
Sergei Shtylyovecf3a312009-03-31 20:15:30 +0200197 .write_devctl = ide_write_devctl,
Stanislaw Gruszka6e5f1e12009-03-05 16:10:58 +0100198
Sergei Shtylyovabb596b2009-03-31 20:15:32 +0200199 .dev_select = ide_dev_select,
Sergei Shtylyov7636e452009-04-08 14:12:51 +0200200 .tf_load = ide_tf_load,
201 .tf_read = ide_tf_read,
Stanislaw Gruszka6e5f1e12009-03-05 16:10:58 +0100202
203 .input_data = at91_ide_input_data,
204 .output_data = at91_ide_output_data,
205};
206
207static const struct ide_port_ops at91_ide_port_ops = {
208 .set_pio_mode = at91_ide_set_pio_mode,
209};
210
211static const struct ide_port_info at91_ide_port_info __initdata = {
212 .port_ops = &at91_ide_port_ops,
213 .tp_ops = &at91_ide_tp_ops,
214 .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA | IDE_HFLAG_SINGLE |
215 IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_UNMASK_IRQS,
Stanislaw Gruszkafb4252e2009-04-08 14:13:04 +0200216 .pio_mask = ATA_PIO6,
Bartlomiej Zolnierkiewicz29e52cf2009-05-17 19:12:22 +0200217 .chipset = ide_generic,
Stanislaw Gruszka6e5f1e12009-03-05 16:10:58 +0100218};
219
220/*
221 * If interrupt is delivered through GPIO, IRQ are triggered on falling
222 * and rising edge of signal. Whereas IDE device request interrupt on high
223 * level (rising edge in our case). This mean we have fake interrupts, so
224 * we need to check interrupt pin and exit instantly from ISR when line
225 * is on low level.
226 */
227
228irqreturn_t at91_irq_handler(int irq, void *dev_id)
229{
230 int ntries = 8;
231 int pin_val1, pin_val2;
232
233 /* additional deglitch, line can be noisy in badly designed PCB */
234 do {
235 pin_val1 = at91_get_gpio_value(irq);
236 pin_val2 = at91_get_gpio_value(irq);
237 } while (pin_val1 != pin_val2 && --ntries > 0);
238
239 if (pin_val1 == 0 || ntries <= 0)
240 return IRQ_HANDLED;
241
242 return ide_intr(irq, dev_id);
243}
244
245static int __init at91_ide_probe(struct platform_device *pdev)
246{
247 int ret;
Bartlomiej Zolnierkiewicz9f36d312009-05-17 19:12:25 +0200248 struct ide_hw hw, *hws[] = { &hw };
Stanislaw Gruszka6e5f1e12009-03-05 16:10:58 +0100249 struct ide_host *host;
250 struct resource *res;
251 unsigned long tf_base = 0, ctl_base = 0;
252 struct at91_cf_data *board = pdev->dev.platform_data;
253
254 if (!board)
255 return -ENODEV;
256
257 if (board->det_pin && at91_get_gpio_value(board->det_pin) != 0) {
258 perr("no device detected\n");
259 return -ENODEV;
260 }
261
262 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
263 if (!res) {
264 perr("can't get memory resource\n");
265 return -ENODEV;
266 }
267
268 if (!devm_request_mem_region(&pdev->dev, res->start + TASK_FILE,
269 REGS_SIZE, "ide") ||
270 !devm_request_mem_region(&pdev->dev, res->start + ALT_MODE,
271 REGS_SIZE, "alt")) {
272 perr("memory resources in use\n");
273 return -EBUSY;
274 }
275
276 pdbg("chipselect %u irq %u res %08lx\n", board->chipselect,
277 board->irq_pin, (unsigned long) res->start);
278
279 tf_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + TASK_FILE,
280 REGS_SIZE);
281 ctl_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + ALT_MODE,
282 REGS_SIZE);
283 if (!tf_base || !ctl_base) {
284 perr("can't map memory regions\n");
285 return -EBUSY;
286 }
287
288 memset(&hw, 0, sizeof(hw));
289
290 if (board->flags & AT91_IDE_SWAP_A0_A2) {
291 /* workaround for stupid hardware bug */
292 hw.io_ports.data_addr = tf_base + 0;
293 hw.io_ports.error_addr = tf_base + 4;
294 hw.io_ports.nsect_addr = tf_base + 2;
295 hw.io_ports.lbal_addr = tf_base + 6;
296 hw.io_ports.lbam_addr = tf_base + 1;
297 hw.io_ports.lbah_addr = tf_base + 5;
298 hw.io_ports.device_addr = tf_base + 3;
299 hw.io_ports.command_addr = tf_base + 7;
300 hw.io_ports.ctl_addr = ctl_base + 3;
301 } else
302 ide_std_init_ports(&hw, tf_base, ctl_base + 6);
303
304 hw.irq = board->irq_pin;
Stanislaw Gruszka6e5f1e12009-03-05 16:10:58 +0100305 hw.dev = &pdev->dev;
306
Bartlomiej Zolnierkiewiczdca39832009-05-17 19:12:24 +0200307 host = ide_host_alloc(&at91_ide_port_info, hws, 1);
Stanislaw Gruszka6e5f1e12009-03-05 16:10:58 +0100308 if (!host) {
309 perr("failed to allocate ide host\n");
310 return -ENOMEM;
311 }
312
313 /* setup Static Memory Controller - PIO 0 as default */
314 apply_timings(board->chipselect, 0, ide_timing_find_mode(XFER_PIO_0), 0);
315
316 /* with GPIO interrupt we have to do quirks in handler */
317 if (board->irq_pin >= PIN_BASE)
318 host->irq_handler = at91_irq_handler;
319
320 host->ports[0]->select_data = board->chipselect;
321
322 ret = ide_host_register(host, &at91_ide_port_info, hws);
323 if (ret) {
324 perr("failed to register ide host\n");
325 goto err_free_host;
326 }
327 platform_set_drvdata(pdev, host);
328 return 0;
329
330err_free_host:
331 ide_host_free(host);
332 return ret;
333}
334
335static int __exit at91_ide_remove(struct platform_device *pdev)
336{
337 struct ide_host *host = platform_get_drvdata(pdev);
338
339 ide_host_remove(host);
340 return 0;
341}
342
343static struct platform_driver at91_ide_driver = {
344 .driver = {
345 .name = DRV_NAME,
346 .owner = THIS_MODULE,
347 },
348 .remove = __exit_p(at91_ide_remove),
349};
350
351static int __init at91_ide_init(void)
352{
353 return platform_driver_probe(&at91_ide_driver, at91_ide_probe);
354}
355
356static void __exit at91_ide_exit(void)
357{
358 platform_driver_unregister(&at91_ide_driver);
359}
360
361module_init(at91_ide_init);
362module_exit(at91_ide_exit);
363
364MODULE_LICENSE("GPL");
365MODULE_AUTHOR("Stanislaw Gruszka <stf_xl@wp.pl>");
366