blob: 62b8869f5a4c43737dc3e89e9cc408c535676ed2 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
Uwe Zeisbergerf30c2262006-10-03 23:01:26 +02002 * sound/oss/uart401.c
Linus Torvalds1da177e2005-04-16 15:20:36 -07003 *
4 * MPU-401 UART driver (formerly uart401_midi.c)
5 *
6 *
7 * Copyright (C) by Hannu Savolainen 1993-1997
8 *
9 * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
10 * Version 2 (June 1991). See the "COPYING" file distributed with this software
11 * for more info.
12 *
13 * Changes:
14 * Alan Cox Reformatted, removed sound_mem usage, use normal Linux
15 * interrupt allocation. Protect against bogus unload
16 * Fixed to allow IRQ > 15
17 * Christoph Hellwig Adapted to module_init/module_exit
18 * Arnaldo C. de Melo got rid of check_region
19 *
20 * Status:
21 * Untested
22 */
23
24#include <linux/init.h>
25#include <linux/interrupt.h>
26#include <linux/module.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090027#include <linux/slab.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070028#include <linux/spinlock.h>
29#include "sound_config.h"
30
31#include "mpu401.h"
32
33typedef struct uart401_devc
34{
35 int base;
36 int irq;
37 int *osp;
38 void (*midi_input_intr) (int dev, unsigned char data);
39 int opened, disabled;
40 volatile unsigned char input_byte;
41 int my_dev;
42 int share_irq;
43 spinlock_t lock;
44}
45uart401_devc;
46
47#define DATAPORT (devc->base)
48#define COMDPORT (devc->base+1)
49#define STATPORT (devc->base+1)
50
51static int uart401_status(uart401_devc * devc)
52{
53 return inb(STATPORT);
54}
55
56#define input_avail(devc) (!(uart401_status(devc)&INPUT_AVAIL))
57#define output_ready(devc) (!(uart401_status(devc)&OUTPUT_READY))
58
59static void uart401_cmd(uart401_devc * devc, unsigned char cmd)
60{
61 outb((cmd), COMDPORT);
62}
63
64static int uart401_read(uart401_devc * devc)
65{
66 return inb(DATAPORT);
67}
68
69static void uart401_write(uart401_devc * devc, unsigned char byte)
70{
71 outb((byte), DATAPORT);
72}
73
74#define OUTPUT_READY 0x40
75#define INPUT_AVAIL 0x80
76#define MPU_ACK 0xFE
77#define MPU_RESET 0xFF
78#define UART_MODE_ON 0x3F
79
80static int reset_uart401(uart401_devc * devc);
81static void enter_uart_mode(uart401_devc * devc);
82
83static void uart401_input_loop(uart401_devc * devc)
84{
85 int work_limit=30000;
86
87 while (input_avail(devc) && --work_limit)
88 {
89 unsigned char c = uart401_read(devc);
90
91 if (c == MPU_ACK)
92 devc->input_byte = c;
93 else if (devc->opened & OPEN_READ && devc->midi_input_intr)
94 devc->midi_input_intr(devc->my_dev, c);
95 }
96 if(work_limit==0)
97 printk(KERN_WARNING "Too much work in interrupt on uart401 (0x%X). UART jabbering ??\n", devc->base);
98}
99
David Howells7d12e782006-10-05 14:55:46 +0100100irqreturn_t uart401intr(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700101{
102 uart401_devc *devc = dev_id;
103
104 if (devc == NULL)
105 {
106 printk(KERN_ERR "uart401: bad devc\n");
107 return IRQ_NONE;
108 }
109
110 if (input_avail(devc))
111 uart401_input_loop(devc);
112 return IRQ_HANDLED;
113}
114
115static int
116uart401_open(int dev, int mode,
117 void (*input) (int dev, unsigned char data),
118 void (*output) (int dev)
119)
120{
121 uart401_devc *devc = (uart401_devc *) midi_devs[dev]->devc;
122
123 if (devc->opened)
124 return -EBUSY;
125
126 /* Flush the UART */
127
128 while (input_avail(devc))
129 uart401_read(devc);
130
131 devc->midi_input_intr = input;
132 devc->opened = mode;
133 enter_uart_mode(devc);
134 devc->disabled = 0;
135
136 return 0;
137}
138
139static void uart401_close(int dev)
140{
141 uart401_devc *devc = (uart401_devc *) midi_devs[dev]->devc;
142
143 reset_uart401(devc);
144 devc->opened = 0;
145}
146
147static int uart401_out(int dev, unsigned char midi_byte)
148{
149 int timeout;
150 unsigned long flags;
151 uart401_devc *devc = (uart401_devc *) midi_devs[dev]->devc;
152
153 if (devc->disabled)
154 return 1;
155 /*
156 * Test for input since pending input seems to block the output.
157 */
158
159 spin_lock_irqsave(&devc->lock,flags);
160 if (input_avail(devc))
161 uart401_input_loop(devc);
162
163 spin_unlock_irqrestore(&devc->lock,flags);
164
165 /*
166 * Sometimes it takes about 13000 loops before the output becomes ready
167 * (After reset). Normally it takes just about 10 loops.
168 */
169
170 for (timeout = 30000; timeout > 0 && !output_ready(devc); timeout--);
171
172 if (!output_ready(devc))
173 {
174 printk(KERN_WARNING "uart401: Timeout - Device not responding\n");
175 devc->disabled = 1;
176 reset_uart401(devc);
177 enter_uart_mode(devc);
178 return 1;
179 }
180 uart401_write(devc, midi_byte);
181 return 1;
182}
183
184static inline int uart401_start_read(int dev)
185{
186 return 0;
187}
188
189static inline int uart401_end_read(int dev)
190{
191 return 0;
192}
193
194static inline void uart401_kick(int dev)
195{
196}
197
198static inline int uart401_buffer_status(int dev)
199{
200 return 0;
201}
202
203#define MIDI_SYNTH_NAME "MPU-401 UART"
204#define MIDI_SYNTH_CAPS SYNTH_CAP_INPUT
205#include "midi_synth.h"
206
207static const struct midi_operations uart401_operations =
208{
209 .owner = THIS_MODULE,
210 .info = {"MPU-401 (UART) MIDI", 0, 0, SNDCARD_MPU401},
211 .converter = &std_midi_synth,
212 .in_info = {0},
213 .open = uart401_open,
214 .close = uart401_close,
215 .outputc = uart401_out,
216 .start_read = uart401_start_read,
217 .end_read = uart401_end_read,
218 .kick = uart401_kick,
219 .buffer_status = uart401_buffer_status,
220};
221
222static void enter_uart_mode(uart401_devc * devc)
223{
224 int ok, timeout;
225 unsigned long flags;
226
227 spin_lock_irqsave(&devc->lock,flags);
228 for (timeout = 30000; timeout > 0 && !output_ready(devc); timeout--);
229
230 devc->input_byte = 0;
231 uart401_cmd(devc, UART_MODE_ON);
232
233 ok = 0;
234 for (timeout = 50000; timeout > 0 && !ok; timeout--)
235 if (devc->input_byte == MPU_ACK)
236 ok = 1;
237 else if (input_avail(devc))
238 if (uart401_read(devc) == MPU_ACK)
239 ok = 1;
240
241 spin_unlock_irqrestore(&devc->lock,flags);
242}
243
244static int reset_uart401(uart401_devc * devc)
245{
246 int ok, timeout, n;
247
248 /*
249 * Send the RESET command. Try again if no success at the first time.
250 */
251
252 ok = 0;
253
254 for (n = 0; n < 2 && !ok; n++)
255 {
256 for (timeout = 30000; timeout > 0 && !output_ready(devc); timeout--);
257 devc->input_byte = 0;
258 uart401_cmd(devc, MPU_RESET);
259
260 /*
261 * Wait at least 25 msec. This method is not accurate so let's make the
262 * loop bit longer. Cannot sleep since this is called during boot.
263 */
264
265 for (timeout = 50000; timeout > 0 && !ok; timeout--)
266 {
267 if (devc->input_byte == MPU_ACK) /* Interrupt */
268 ok = 1;
269 else if (input_avail(devc))
270 {
271 if (uart401_read(devc) == MPU_ACK)
272 ok = 1;
273 }
274 }
275 }
276
Joe Perches3af5d052014-04-04 09:09:08 -0700277 /* Flush input before enabling interrupts */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700278 if (ok)
Joe Perches3af5d052014-04-04 09:09:08 -0700279 uart401_input_loop(devc);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700280 else
281 DDB(printk("Reset UART401 failed - No hardware detected.\n"));
282
Linus Torvalds1da177e2005-04-16 15:20:36 -0700283 return ok;
284}
285
286int probe_uart401(struct address_info *hw_config, struct module *owner)
287{
288 uart401_devc *devc;
289 char *name = "MPU-401 (UART) MIDI";
290 int ok = 0;
291 unsigned long flags;
292
293 DDB(printk("Entered probe_uart401()\n"));
294
295 /* Default to "not found" */
296 hw_config->slots[4] = -1;
297
298 if (!request_region(hw_config->io_base, 4, "MPU-401 UART")) {
299 printk(KERN_INFO "uart401: could not request_region(%d, 4)\n", hw_config->io_base);
300 return 0;
301 }
302
303 devc = kmalloc(sizeof(uart401_devc), GFP_KERNEL);
304 if (!devc) {
305 printk(KERN_WARNING "uart401: Can't allocate memory\n");
306 goto cleanup_region;
307 }
308
309 devc->base = hw_config->io_base;
310 devc->irq = hw_config->irq;
311 devc->osp = hw_config->osp;
312 devc->midi_input_intr = NULL;
313 devc->opened = 0;
314 devc->input_byte = 0;
315 devc->my_dev = 0;
316 devc->share_irq = 0;
317 spin_lock_init(&devc->lock);
318
319 spin_lock_irqsave(&devc->lock,flags);
320 ok = reset_uart401(devc);
321 spin_unlock_irqrestore(&devc->lock,flags);
322
323 if (!ok)
324 goto cleanup_devc;
325
326 if (hw_config->name)
327 name = hw_config->name;
328
329 if (devc->irq < 0) {
330 devc->share_irq = 1;
331 devc->irq *= -1;
332 } else
333 devc->share_irq = 0;
334
335 if (!devc->share_irq)
336 if (request_irq(devc->irq, uart401intr, 0, "MPU-401 UART", devc) < 0) {
337 printk(KERN_WARNING "uart401: Failed to allocate IRQ%d\n", devc->irq);
338 devc->share_irq = 1;
339 }
340 devc->my_dev = sound_alloc_mididev();
341 enter_uart_mode(devc);
342
343 if (devc->my_dev == -1) {
344 printk(KERN_INFO "uart401: Too many midi devices detected\n");
345 goto cleanup_irq;
346 }
347 conf_printf(name, hw_config);
Alexandru Gheorghiu0d9ffc92013-03-25 15:46:49 +0200348 midi_devs[devc->my_dev] = kmemdup(&uart401_operations,
349 sizeof(struct midi_operations),
350 GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700351 if (!midi_devs[devc->my_dev]) {
352 printk(KERN_ERR "uart401: Failed to allocate memory\n");
353 goto cleanup_unload_mididev;
354 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700355
356 if (owner)
357 midi_devs[devc->my_dev]->owner = owner;
358
359 midi_devs[devc->my_dev]->devc = devc;
Alexandru Gheorghiu0d9ffc92013-03-25 15:46:49 +0200360 midi_devs[devc->my_dev]->converter = kmemdup(&std_midi_synth,
361 sizeof(struct synth_operations),
362 GFP_KERNEL);
363
Linus Torvalds1da177e2005-04-16 15:20:36 -0700364 if (!midi_devs[devc->my_dev]->converter) {
365 printk(KERN_WARNING "uart401: Failed to allocate memory\n");
366 goto cleanup_midi_devs;
367 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700368 strcpy(midi_devs[devc->my_dev]->info.name, name);
369 midi_devs[devc->my_dev]->converter->id = "UART401";
370 midi_devs[devc->my_dev]->converter->midi_dev = devc->my_dev;
371
372 if (owner)
373 midi_devs[devc->my_dev]->converter->owner = owner;
374
375 hw_config->slots[4] = devc->my_dev;
376 sequencer_init();
377 devc->opened = 0;
378 return 1;
379cleanup_midi_devs:
380 kfree(midi_devs[devc->my_dev]);
381cleanup_unload_mididev:
382 sound_unload_mididev(devc->my_dev);
383cleanup_irq:
384 if (!devc->share_irq)
385 free_irq(devc->irq, devc);
386cleanup_devc:
387 kfree(devc);
388cleanup_region:
389 release_region(hw_config->io_base, 4);
390 return 0;
391}
392
393void unload_uart401(struct address_info *hw_config)
394{
395 uart401_devc *devc;
396 int n=hw_config->slots[4];
397
398 /* Not set up */
399 if(n==-1 || midi_devs[n]==NULL)
400 return;
401
402 /* Not allocated (erm ??) */
403
404 devc = midi_devs[hw_config->slots[4]]->devc;
405 if (devc == NULL)
406 return;
407
408 reset_uart401(devc);
409 release_region(hw_config->io_base, 4);
410
411 if (!devc->share_irq)
412 free_irq(devc->irq, devc);
413 if (devc)
414 {
415 kfree(midi_devs[devc->my_dev]->converter);
416 kfree(midi_devs[devc->my_dev]);
417 kfree(devc);
418 devc = NULL;
419 }
420 /* This kills midi_devs[x] */
421 sound_unload_mididev(hw_config->slots[4]);
422}
423
424EXPORT_SYMBOL(probe_uart401);
425EXPORT_SYMBOL(unload_uart401);
426EXPORT_SYMBOL(uart401intr);
427
428static struct address_info cfg_mpu;
429
430static int io = -1;
431static int irq = -1;
432
433module_param(io, int, 0444);
434module_param(irq, int, 0444);
435
436
437static int __init init_uart401(void)
438{
439 cfg_mpu.irq = irq;
440 cfg_mpu.io_base = io;
441
442 /* Can be loaded either for module use or to provide functions
443 to others */
444 if (cfg_mpu.io_base != -1 && cfg_mpu.irq != -1) {
445 printk(KERN_INFO "MPU-401 UART driver Copyright (C) Hannu Savolainen 1993-1997");
446 if (!probe_uart401(&cfg_mpu, THIS_MODULE))
447 return -ENODEV;
448 }
449
450 return 0;
451}
452
453static void __exit cleanup_uart401(void)
454{
455 if (cfg_mpu.io_base != -1 && cfg_mpu.irq != -1)
456 unload_uart401(&cfg_mpu);
457}
458
459module_init(init_uart401);
460module_exit(cleanup_uart401);
461
462#ifndef MODULE
463static int __init setup_uart401(char *str)
464{
465 /* io, irq */
466 int ints[3];
467
468 str = get_options(str, ARRAY_SIZE(ints), ints);
469
470 io = ints[1];
471 irq = ints[2];
472
473 return 1;
474}
475
476__setup("uart401=", setup_uart401);
477#endif
478MODULE_LICENSE("GPL");