blob: 142c17ab9e574688555dd890a0bac36a7ec333f2 [file] [log] [blame]
David Woodhouse4d2acfb2008-05-23 13:58:12 +01001#
2# kbuild file for firmware/
3#
4
5# Create $(fwabs) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a
6# leading /, it's relative to $(srctree).
7fwdir := $(subst ",,$(CONFIG_EXTRA_FIRMWARE_DIR))
8fwabs := $(addprefix $(srctree)/,$(filter-out /%,$(fwdir)))$(filter /%,$(fwdir))
9
10fw-external-y := $(subst ",,$(CONFIG_EXTRA_FIRMWARE))
11
David Woodhouse88ecf812008-05-29 11:01:51 +030012# There are three cases to care about:
13# 1. Building kernel with CONFIG_FIRMWARE_IN_KERNEL=y -- $(fw-shipped-y) should
14# include the firmware files to include, according to .config
15# 2. 'make modules_install', which will install firmware for modules, and
16# _also_ for the in-kernel drivers when CONFIG_FIRMWARE_IN_KERNEL=n
17# 3. 'make firmware_install', which installs all firmware, unconditionally.
David Woodhoused172e7f2008-06-25 13:56:07 +010018
David Woodhouse88ecf812008-05-29 11:01:51 +030019# For the former two cases we want $(fw-shipped-y) and $(fw-shipped-m) to be
20# accurate. In the latter case it doesn't matter -- it'll use $(fw-shipped-all).
21# But be aware that the config file might not be included at all.
22
Jaswinder Singh949b4252009-01-04 16:09:40 -080023ifdef CONFIG_ACENIC_OMIT_TIGON_I
24acenic-objs := acenic/tg2.bin
25fw-shipped- += acenic/tg1.bin
26else
27acenic-objs := acenic/tg1.bin acenic/tg2.bin
28endif
Jaswinder Singh Rajput4b6ece92009-03-30 19:44:59 +053029fw-shipped-$(CONFIG_3C359) += 3com/3C359.bin
Jaswinder Singh949b4252009-01-04 16:09:40 -080030fw-shipped-$(CONFIG_ACENIC) += $(acenic-objs)
Jaswinder Singh Rajputcfc3a442009-01-04 16:12:11 -080031fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \
32 adaptec/starfire_tx.bin
Jaswinder Singh7f127d52008-07-05 15:28:30 +053033fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
David Woodhouse27d202f2008-06-05 12:59:51 +010034fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
Michael Chan57579f72009-04-04 16:51:14 -070035fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-4.6.17.fw \
36 bnx2/bnx2-rv2p-09-4.6.15.fw \
37 bnx2/bnx2-mips-06-4.6.16.fw \
38 bnx2/bnx2-rv2p-06-4.6.16.fw
Jaswinder Singhfcaa4062008-09-22 19:27:10 -070039fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin
David Woodhouse547d8bb2008-06-11 16:57:21 +010040fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
Divy Le Rayad586332008-11-26 15:37:50 -080041fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
42 cxgb3/t3c_psram-1.1.0.bin \
Divy Le Rayd9507a52009-03-12 21:14:24 +000043 cxgb3/t3fw-7.1.0.bin
Jaswinder Singh9137f052009-04-06 14:34:12 -070044fw-shipped-$(CONFIG_DVB_AV7110) += av7110/bootcode.bin
David Woodhouse0a2a7362008-05-29 19:50:06 +030045fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
Jaswinder Singh Rajput9ac32e12009-01-07 12:59:17 -080046fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
47 e100/d102e_ucode.bin
Jaswinder Singh Rajputcd36e9e2009-04-04 16:38:42 -070048fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin
Jaswinder Singh Rajput75bf7582009-03-30 20:19:54 +053049fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
Jaswinder Singh Rajput989bb5f2009-04-02 11:28:06 +053050fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
51 advansys/3550.bin advansys/38C0800.bin
Jaswinder Singh Rajput1bfa11d2009-04-02 11:13:17 +053052fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \
53 qlogic/12160.bin
Jaswinder Singh Rajputf894e742009-04-03 01:42:50 +053054fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin
David Woodhouse0f805b82008-05-29 16:39:16 +030055fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
David Woodhouse76770662008-05-26 23:01:27 +010056fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
David Woodhousea292f402008-05-29 14:48:34 +030057fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
58 ess/maestro3_assp_minisrc.fw
Jaswinder Singhd71792a2008-07-05 18:05:22 +053059fw-shipped-$(CONFIG_SND_SB16_CSP) += sb16/mulaw_main.csp sb16/alaw_main.csp \
60 sb16/ima_adpcm_init.csp \
61 sb16/ima_adpcm_playback.csp \
62 sb16/ima_adpcm_capture.csp
David Woodhouse18ee6df2008-05-29 15:07:34 +030063fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \
64 yamaha/ds1e_ctrl.fw
Takashi Iwai7c7cae12009-04-06 14:38:43 -070065fw-shipped-$(CONFIG_SND_WAVEFRONT) += yamaha/yss225_registers.bin
Ben Hutchings06e1f9f2009-02-26 23:20:56 -080066fw-shipped-$(CONFIG_TEHUTI) += tehuti/bdx.bin
Jaswinder Singh Rajput077f8492009-01-04 16:11:25 -080067fw-shipped-$(CONFIG_TIGON3) += tigon/tg3.bin tigon/tg3_tso.bin \
68 tigon/tg3_tso5.bin
Ben Hutchingsb775a752009-02-26 23:21:23 -080069fw-shipped-$(CONFIG_TYPHOON) += 3com/typhoon.bin
David Woodhousec4667742008-06-23 11:41:04 +010070fw-shipped-$(CONFIG_USB_DABUSB) += dabusb/firmware.fw dabusb/bitstream.bin
David Woodhouseae93a552008-05-30 16:19:39 +030071fw-shipped-$(CONFIG_USB_EMI26) += emi26/loader.fw emi26/firmware.fw \
72 emi26/bitstream.fw
David Woodhouseb8e24bf2008-05-30 17:35:47 +030073fw-shipped-$(CONFIG_USB_EMI62) += emi62/loader.fw emi62/bitstream.fw \
74 emi62/spdif.fw emi62/midi.fw
David Woodhouse79682492008-05-29 17:17:17 +030075fw-shipped-$(CONFIG_USB_KAWETH) += kaweth/new_code.bin kaweth/trigger_code.bin \
76 kaweth/new_code_fix.bin \
77 kaweth/trigger_code_fix.bin
David Woodhouse2971c572008-05-30 14:04:03 +030078ifdef CONFIG_FIRMWARE_IN_KERNEL
79fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_MPR) += keyspan/mpr.fw
80fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA18X) += keyspan/usa18x.fw
81fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19) += keyspan/usa19.fw
82fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QI) += keyspan/usa19qi.fw
83fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QW) += keyspan/usa19qw.fw
84fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19W) += keyspan/usa19w.fw
85fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28) += keyspan/usa28.fw
86fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XA) += keyspan/usa28xa.fw
87fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XB) += keyspan/usa28xb.fw
88fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28X) += keyspan/usa28x.fw
89fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49W) += keyspan/usa49w.fw
90fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49WLC) += keyspan/usa49wlc.fw
91else
David Woodhoused25dc7f2008-07-15 22:54:04 -070092fw-shipped- += keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw \
David Woodhouse2971c572008-05-30 14:04:03 +030093 keyspan/usa19qi.fw keyspan/usa19qw.fw keyspan/usa19w.fw \
94 keyspan/usa28.fw keyspan/usa28xa.fw keyspan/usa28xb.fw \
95 keyspan/usa28x.fw keyspan/usa49w.fw keyspan/usa49wlc.fw
96endif
Chris Adams7df52312009-01-11 19:49:11 +000097fw-shipped-$(CONFIG_USB_SERIAL_TI) += ti_3410.fw ti_5052.fw \
98 mts_cdma.fw mts_gsm.fw mts_edge.fw
Jaswinder Singh5b9ea932008-07-03 17:00:23 +053099fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT) += edgeport/boot.fw edgeport/boot2.fw \
100 edgeport/down.fw edgeport/down2.fw
Jaswinder Singhd12b2192008-07-04 23:06:09 +0530101fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += edgeport/down3.bin
David Woodhouseec6752f2008-05-31 01:35:29 +0300102fw-shipped-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat_loader.fw whiteheat.fw \
103 # whiteheat_loader_debug.fw
David Woodhouse3edbf982008-05-30 15:15:13 +0300104fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw
105fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
Jaswinder Singhfb54be82008-06-27 19:50:40 +0530106fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
David Woodhouse04a33e42008-06-23 11:36:23 +0100107fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
Jaswinder Singh Rajputa7a5eb92009-03-30 18:17:21 +0530108fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin
David Woodhouse88ecf812008-05-29 11:01:51 +0300109
110fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
111
112# Directories which we _might_ need to create, so we have a rule for them.
113firmware-dirs := $(sort $(patsubst %,$(objtree)/$(obj)/%/,$(dir $(fw-external-y) $(fw-shipped-all))))
David Woodhouse4d2acfb2008-05-23 13:58:12 +0100114
115quiet_cmd_mkdir = MKDIR $(patsubst $(objtree)/%,%,$@)
116 cmd_mkdir = mkdir -p $@
117
118quiet_cmd_ihex = IHEX $@
119 cmd_ihex = $(OBJCOPY) -Iihex -Obinary $< $@
120
David Woodhouse8bd6b222008-05-31 15:07:18 +0300121quiet_cmd_ihex2fw = IHEX2FW $@
David Woodhouse556b0f52009-01-10 14:53:15 +0000122 cmd_ihex2fw = $(objtree)/$(obj)/ihex2fw $< $@
David Woodhouse8bd6b222008-05-31 15:07:18 +0300123
David Woodhouse59890f72008-06-26 13:55:30 +0100124quiet_cmd_h16tofw = H16TOFW $@
David Woodhouse556b0f52009-01-10 14:53:15 +0000125 cmd_h16tofw = $(objtree)/$(obj)/ihex2fw -w $< $@
David Woodhouse59890f72008-06-26 13:55:30 +0100126
David Woodhouse4d2acfb2008-05-23 13:58:12 +0100127quiet_cmd_fwbin = MK_FW $@
128 cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)"; \
129 FWSTR="$(subst /,_,$(subst .,_,$(subst -,_,$(patsubst \
130 firmware/%.gen.S,%,$@))))"; \
131 ASM_WORD=$(if $(CONFIG_64BIT),.quad,.long); \
132 ASM_ALIGN=$(if $(CONFIG_64BIT),3,2); \
133 PROGBITS=$(if $(CONFIG_ARM),%,@)progbits; \
134 echo "/* Generated by firmware/Makefile */" > $@;\
135 echo " .section .rodata" >>$@;\
136 echo " .p2align $${ASM_ALIGN}" >>$@;\
137 echo "_fw_$${FWSTR}_bin:" >>$@;\
138 echo " .incbin \"$(2)\"" >>$@;\
139 echo "_fw_end:" >>$@;\
140 echo " .section .rodata.str,\"aMS\",$${PROGBITS},1" >>$@;\
141 echo " .p2align $${ASM_ALIGN}" >>$@;\
142 echo "_fw_$${FWSTR}_name:" >>$@;\
143 echo " .string \"$$FWNAME\"" >>$@;\
144 echo " .section .builtin_fw,\"a\",$${PROGBITS}" >>$@;\
145 echo " .p2align $${ASM_ALIGN}" >>$@;\
146 echo " $${ASM_WORD} _fw_$${FWSTR}_name" >>$@;\
147 echo " $${ASM_WORD} _fw_$${FWSTR}_bin" >>$@;\
148 echo " $${ASM_WORD} _fw_end - _fw_$${FWSTR}_bin" >>$@;
149
150# One of these files will change, or come into existence, whenever
151# the configuration changes between 32-bit and 64-bit. The .S files
152# need to change when that happens.
153wordsize_deps := $(wildcard include/config/64bit.h include/config/32bit.h \
154 include/config/ppc32.h include/config/ppc64.h \
155 include/config/superh32.h include/config/superh64.h \
156 include/config/x86_32.h include/config/x86_64.h)
157
158# Workaround for make < 3.81, where .SECONDEXPANSION doesn't work.
159# It'll end up depending on these targets, so make them a PHONY rule which
160# depends on _all_ the directories in $(firmware-dirs), and it'll work out OK.
161PHONY += $(objtree)/$$(%) $(objtree)/$(obj)/$$(%)
162$(objtree)/$$(%) $(objtree)/$(obj)/$$(%): $(firmware-dirs)
163 @true
164
165# For the $$(dir %) trick, where we need % to be expanded first.
166.SECONDEXPANSION:
167
168$(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps) \
169 | $(objtree)/$$(dir %)
170 $(call cmd,fwbin,$(patsubst %.gen.S,%,$@))
171$(patsubst %,$(obj)/%.gen.S, $(fw-external-y)): %: $(wordsize_deps) \
David Woodhouse50515af2008-07-14 17:50:24 -0700172 include/config/extra/firmware/dir.h | $(objtree)/$$(dir %)
David Woodhouse4d2acfb2008-05-23 13:58:12 +0100173 $(call cmd,fwbin,$(fwabs)/$(patsubst $(obj)/%.gen.S,%,$@))
174
175# The .o files depend on the binaries directly; the .S files don't.
176$(patsubst %,$(obj)/%.gen.o, $(fw-shipped-y)): %.gen.o: %
177$(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/%
178
David Woodhouse8bd6b222008-05-31 15:07:18 +0300179# .ihex is used just as a simple way to hold binary files in a source tree
180# where binaries are frowned upon. They are directly converted with objcopy.
David Woodhouse4d2acfb2008-05-23 13:58:12 +0100181$(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
182 $(call cmd,ihex)
183
David Woodhouse4528e422009-01-10 14:54:48 +0000184# Don't depend on ihex2fw if we're installing and it already exists.
185# Putting it after | in the dependencies doesn't seem sufficient when
186# we're installing after a cross-compile, because ihex2fw has dependencies
187# on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and
188# thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree
189# is exported read-only for someone to run 'make install'.
190ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw)
191ihex2fw_dep :=
192else
193ihex2fw_dep := $(obj)/ihex2fw
194endif
195
David Woodhouse8bd6b222008-05-31 15:07:18 +0300196# .HEX is also Intel HEX, but where the offset and length in each record
197# is actually meaningful, because the firmware has to be loaded in a certain
198# order rather than as a single binary blob. Thus, we convert them into our
199# more compact binary representation of ihex records (<linux/ihex.h>)
David Woodhouse4528e422009-01-10 14:54:48 +0000200$(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
David Woodhouse8bd6b222008-05-31 15:07:18 +0300201 $(call cmd,ihex2fw)
202
David Woodhouse59890f72008-06-26 13:55:30 +0100203# .H16 is our own modified form of Intel HEX, with 16-bit length for records.
David Woodhouse4528e422009-01-10 14:54:48 +0000204$(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
David Woodhouse59890f72008-06-26 13:55:30 +0100205 $(call cmd,h16tofw)
206
David Woodhouse4d2acfb2008-05-23 13:58:12 +0100207$(firmware-dirs):
208 $(call cmd,mkdir)
209
David Woodhouse88ecf812008-05-29 11:01:51 +0300210obj-y += $(patsubst %,%.gen.o, $(fw-external-y))
211obj-$(CONFIG_FIRMWARE_IN_KERNEL) += $(patsubst %,%.gen.o, $(fw-shipped-y))
David Woodhouse4d2acfb2008-05-23 13:58:12 +0100212
213# Remove .S files and binaries created from ihex
214# (during 'make clean' .config isn't included so they're all in $(fw-shipped-))
215targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \
216 $(shell find $(obj) -name \*.gen.S 2>/dev/null))
217
218# Without this, built-in.o won't be created when it's empty, and the
219# final vmlinux link will fail.
220obj-n := dummy
David Woodhouse556b0f52009-01-10 14:53:15 +0000221
222hostprogs-y := ihex2fw