blob: 29c0448265cf7c7e4b9312f3cd684a319fcf8de3 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * linux/include/asm-arm/hardware/amba_clcd.h -- Integrator LCD panel.
3 *
4 * David A Rusling
5 *
6 * Copyright (C) 2001 ARM Limited
7 *
8 * This file is subject to the terms and conditions of the GNU General Public
9 * License. See the file COPYING in the main directory of this archive
10 * for more details.
11 */
Linus Torvalds1da177e2005-04-16 15:20:36 -070012#include <linux/fb.h>
13
14/*
15 * CLCD Controller Internal Register addresses
16 */
17#define CLCD_TIM0 0x00000000
18#define CLCD_TIM1 0x00000004
19#define CLCD_TIM2 0x00000008
20#define CLCD_TIM3 0x0000000c
21#define CLCD_UBAS 0x00000010
22#define CLCD_LBAS 0x00000014
23
Catalin Marinas8ad68bb2005-10-31 14:25:02 +000024#if !defined(CONFIG_ARCH_VERSATILE) && !defined(CONFIG_ARCH_REALVIEW)
Linus Torvalds1da177e2005-04-16 15:20:36 -070025#define CLCD_IENB 0x00000018
26#define CLCD_CNTL 0x0000001c
27#else
28/*
29 * Someone rearranged these two registers on the Versatile
30 * platform...
31 */
32#define CLCD_IENB 0x0000001c
33#define CLCD_CNTL 0x00000018
34#endif
35
36#define CLCD_STAT 0x00000020
37#define CLCD_INTR 0x00000024
38#define CLCD_UCUR 0x00000028
39#define CLCD_LCUR 0x0000002C
40#define CLCD_PALL 0x00000200
41#define CLCD_PALETTE 0x00000200
42
43#define TIM2_CLKSEL (1 << 5)
44#define TIM2_IVS (1 << 11)
45#define TIM2_IHS (1 << 12)
46#define TIM2_IPC (1 << 13)
47#define TIM2_IOE (1 << 14)
48#define TIM2_BCD (1 << 26)
49
50#define CNTL_LCDEN (1 << 0)
51#define CNTL_LCDBPP1 (0 << 1)
52#define CNTL_LCDBPP2 (1 << 1)
53#define CNTL_LCDBPP4 (2 << 1)
54#define CNTL_LCDBPP8 (3 << 1)
55#define CNTL_LCDBPP16 (4 << 1)
Catalin Marinas243f1962006-03-16 14:10:19 +000056#define CNTL_LCDBPP16_565 (6 << 1)
Linus Torvalds1da177e2005-04-16 15:20:36 -070057#define CNTL_LCDBPP24 (5 << 1)
58#define CNTL_LCDBW (1 << 4)
59#define CNTL_LCDTFT (1 << 5)
60#define CNTL_LCDMONO8 (1 << 6)
61#define CNTL_LCDDUAL (1 << 7)
62#define CNTL_BGR (1 << 8)
63#define CNTL_BEBO (1 << 9)
64#define CNTL_BEPO (1 << 10)
65#define CNTL_LCDPWR (1 << 11)
66#define CNTL_LCDVCOMP(x) ((x) << 12)
67#define CNTL_LDMAFIFOTIME (1 << 15)
68#define CNTL_WATERMARK (1 << 16)
69
70struct clcd_panel {
71 struct fb_videomode mode;
72 signed short width; /* width in mm */
73 signed short height; /* height in mm */
74 u32 tim2;
75 u32 tim3;
76 u32 cntl;
77 unsigned int bpp:8,
78 fixedtimings:1,
79 grayscale:1;
80 unsigned int connector;
81};
82
83struct clcd_regs {
84 u32 tim0;
85 u32 tim1;
86 u32 tim2;
87 u32 tim3;
88 u32 cntl;
89 unsigned long pixclock;
90};
91
92struct clcd_fb;
93
94/*
95 * the board-type specific routines
96 */
97struct clcd_board {
98 const char *name;
99
100 /*
101 * Optional. Check whether the var structure is acceptable
102 * for this display.
103 */
104 int (*check)(struct clcd_fb *fb, struct fb_var_screeninfo *var);
105
106 /*
107 * Compulsary. Decode fb->fb.var into regs->*. In the case of
108 * fixed timing, set regs->* to the register values required.
109 */
110 void (*decode)(struct clcd_fb *fb, struct clcd_regs *regs);
111
112 /*
113 * Optional. Disable any extra display hardware.
114 */
115 void (*disable)(struct clcd_fb *);
116
117 /*
118 * Optional. Enable any extra display hardware.
119 */
120 void (*enable)(struct clcd_fb *);
121
122 /*
123 * Setup platform specific parts of CLCD driver
124 */
125 int (*setup)(struct clcd_fb *);
126
127 /*
128 * mmap the framebuffer memory
129 */
130 int (*mmap)(struct clcd_fb *, struct vm_area_struct *);
131
132 /*
133 * Remove platform specific parts of CLCD driver
134 */
135 void (*remove)(struct clcd_fb *);
136};
137
138struct amba_device;
139struct clk;
140
141/* this data structure describes each frame buffer device we find */
142struct clcd_fb {
143 struct fb_info fb;
144 struct amba_device *dev;
145 struct clk *clk;
146 struct clcd_panel *panel;
147 struct clcd_board *board;
148 void *board_data;
149 void __iomem *regs;
150 u32 clcd_cntl;
151 u32 cmap[16];
152};
153
154static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs)
155{
Russell Kingc4d12b92005-04-28 10:38:19 +0100156 u32 val, cpl;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700157
158 /*
159 * Program the CLCD controller registers and start the CLCD
160 */
161 val = ((fb->fb.var.xres / 16) - 1) << 2;
162 val |= (fb->fb.var.hsync_len - 1) << 8;
163 val |= (fb->fb.var.right_margin - 1) << 16;
164 val |= (fb->fb.var.left_margin - 1) << 24;
165 regs->tim0 = val;
166
Russell Kingc4d12b92005-04-28 10:38:19 +0100167 val = fb->fb.var.yres;
168 if (fb->panel->cntl & CNTL_LCDDUAL)
169 val /= 2;
170 val -= 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700171 val |= (fb->fb.var.vsync_len - 1) << 10;
172 val |= fb->fb.var.lower_margin << 16;
173 val |= fb->fb.var.upper_margin << 24;
174 regs->tim1 = val;
175
176 val = fb->panel->tim2;
177 val |= fb->fb.var.sync & FB_SYNC_HOR_HIGH_ACT ? 0 : TIM2_IHS;
178 val |= fb->fb.var.sync & FB_SYNC_VERT_HIGH_ACT ? 0 : TIM2_IVS;
179
Russell Kingc4d12b92005-04-28 10:38:19 +0100180 cpl = fb->fb.var.xres_virtual;
181 if (fb->panel->cntl & CNTL_LCDTFT) /* TFT */
182 /* / 1 */;
183 else if (!fb->fb.var.grayscale) /* STN color */
184 cpl = cpl * 8 / 3;
185 else if (fb->panel->cntl & CNTL_LCDMONO8) /* STN monochrome, 8bit */
186 cpl /= 8;
187 else /* STN monochrome, 4bit */
188 cpl /= 4;
189
190 regs->tim2 = val | ((cpl - 1) << 16);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700191
192 regs->tim3 = fb->panel->tim3;
193
194 val = fb->panel->cntl;
195 if (fb->fb.var.grayscale)
196 val |= CNTL_LCDBW;
197
198 switch (fb->fb.var.bits_per_pixel) {
199 case 1:
200 val |= CNTL_LCDBPP1;
201 break;
202 case 2:
203 val |= CNTL_LCDBPP2;
204 break;
205 case 4:
206 val |= CNTL_LCDBPP4;
207 break;
208 case 8:
209 val |= CNTL_LCDBPP8;
210 break;
211 case 16:
Catalin Marinas243f1962006-03-16 14:10:19 +0000212 /*
213 * PL110 cannot choose between 5551 and 565 modes in
214 * its control register
215 */
216 if ((fb->dev->periphid & 0x000fffff) == 0x00041110)
217 val |= CNTL_LCDBPP16;
218 else if (fb->fb.var.green.length == 5)
219 val |= CNTL_LCDBPP16;
220 else
221 val |= CNTL_LCDBPP16_565;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700222 break;
Russell King82235e92005-04-28 10:43:52 +0100223 case 32:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700224 val |= CNTL_LCDBPP24;
225 break;
226 }
227
228 regs->cntl = val;
229 regs->pixclock = fb->fb.var.pixclock;
230}
231
232static inline int clcdfb_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
233{
Russell King0f7ad452005-04-28 10:46:15 +0100234 var->xres_virtual = var->xres = (var->xres + 15) & ~15;
Russell Kingc4d12b92005-04-28 10:38:19 +0100235 var->yres_virtual = var->yres = (var->yres + 1) & ~1;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700236
237#define CHECK(e,l,h) (var->e < l || var->e > h)
238 if (CHECK(right_margin, (5+1), 256) || /* back porch */
239 CHECK(left_margin, (5+1), 256) || /* front porch */
240 CHECK(hsync_len, (5+1), 256) ||
241 var->xres > 4096 ||
242 var->lower_margin > 255 || /* back porch */
243 var->upper_margin > 255 || /* front porch */
244 var->vsync_len > 32 ||
245 var->yres > 1024)
246 return -EINVAL;
247#undef CHECK
248
249 /* single panel mode: PCD = max(PCD, 1) */
250 /* dual panel mode: PCD = max(PCD, 5) */
251
252 /*
253 * You can't change the grayscale setting, and
254 * we can only do non-interlaced video.
255 */
256 if (var->grayscale != fb->fb.var.grayscale ||
257 (var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED)
258 return -EINVAL;
259
260#define CHECK(e) (var->e != fb->fb.var.e)
261 if (fb->panel->fixedtimings &&
262 (CHECK(xres) ||
263 CHECK(yres) ||
264 CHECK(bits_per_pixel) ||
265 CHECK(pixclock) ||
266 CHECK(left_margin) ||
267 CHECK(right_margin) ||
268 CHECK(upper_margin) ||
269 CHECK(lower_margin) ||
270 CHECK(hsync_len) ||
271 CHECK(vsync_len) ||
272 CHECK(sync)))
273 return -EINVAL;
274#undef CHECK
275
276 var->nonstd = 0;
277 var->accel_flags = 0;
278
279 return 0;
280}