blob: 92f89d50850c95aae55c195a354caef666a370d5 [file] [log] [blame]
Anil Ravindranath89a36812009-08-25 17:35:18 -07001/*
2 * pmcraid.h -- PMC Sierra MaxRAID controller driver header file
3 *
Anil Ravindranath729c8452009-11-20 09:39:30 -08004 * Written By: Anil Ravindranath<anil_ravindranath@pmc-sierra.com>
5 * PMC-Sierra Inc
6 *
Anil Ravindranath89a36812009-08-25 17:35:18 -07007 * Copyright (C) 2008, 2009 PMC Sierra Inc.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 */
23
24#ifndef _PMCRAID_H
25#define _PMCRAID_H
26
27#include <linux/version.h>
28#include <linux/types.h>
29#include <linux/completion.h>
30#include <linux/list.h>
31#include <scsi/scsi.h>
Anil Ravindranath89a36812009-08-25 17:35:18 -070032#include <scsi/scsi_cmnd.h>
33#include <linux/cdev.h>
34#include <net/netlink.h>
35#include <net/genetlink.h>
36#include <linux/connector.h>
37/*
38 * Driver name : string representing the driver name
39 * Device file : /dev file to be used for management interfaces
40 * Driver version: version string in major_version.minor_version.patch format
41 * Driver date : date information in "Mon dd yyyy" format
42 */
43#define PMCRAID_DRIVER_NAME "PMC MaxRAID"
44#define PMCRAID_DEVFILE "pmcsas"
45#define PMCRAID_DRIVER_VERSION "1.0.2"
46#define PMCRAID_DRIVER_DATE __DATE__
47
48/* Maximum number of adapters supported by current version of the driver */
49#define PMCRAID_MAX_ADAPTERS 1024
50
51/* Bit definitions as per firmware, bit position [0][1][2].....[31] */
52#define PMC_BIT8(n) (1 << (7-n))
53#define PMC_BIT16(n) (1 << (15-n))
54#define PMC_BIT32(n) (1 << (31-n))
55
56/* PMC PCI vendor ID and device ID values */
57#define PCI_VENDOR_ID_PMC 0x11F8
58#define PCI_DEVICE_ID_PMC_MAXRAID 0x5220
59
60/*
61 * MAX_CMD : maximum commands that can be outstanding with IOA
62 * MAX_IO_CMD : command blocks available for IO commands
63 * MAX_HCAM_CMD : command blocks avaibale for HCAMS
64 * MAX_INTERNAL_CMD : command blocks avaible for internal commands like reset
65 */
66#define PMCRAID_MAX_CMD 1024
67#define PMCRAID_MAX_IO_CMD 1020
68#define PMCRAID_MAX_HCAM_CMD 2
69#define PMCRAID_MAX_INTERNAL_CMD 2
70
71/* MAX_IOADLS : max number of scatter-gather lists supported by IOA
72 * IOADLS_INTERNAL : number of ioadls included as part of IOARCB.
73 * IOADLS_EXTERNAL : number of ioadls allocated external to IOARCB
74 */
75#define PMCRAID_IOADLS_INTERNAL 27
76#define PMCRAID_IOADLS_EXTERNAL 37
77#define PMCRAID_MAX_IOADLS PMCRAID_IOADLS_INTERNAL
78
79/* HRRQ_ENTRY_SIZE : size of hrrq buffer
80 * IOARCB_ALIGNMENT : alignment required for IOARCB
81 * IOADL_ALIGNMENT : alignment requirement for IOADLs
82 * MSIX_VECTORS : number of MSIX vectors supported
83 */
84#define HRRQ_ENTRY_SIZE sizeof(__le32)
85#define PMCRAID_IOARCB_ALIGNMENT 32
86#define PMCRAID_IOADL_ALIGNMENT 16
87#define PMCRAID_IOASA_ALIGNMENT 4
88#define PMCRAID_NUM_MSIX_VECTORS 1
89
90/* various other limits */
91#define PMCRAID_VENDOR_ID_LEN 8
92#define PMCRAID_PRODUCT_ID_LEN 16
93#define PMCRAID_SERIAL_NUM_LEN 8
94#define PMCRAID_LUN_LEN 8
95#define PMCRAID_MAX_CDB_LEN 16
96#define PMCRAID_DEVICE_ID_LEN 8
97#define PMCRAID_SENSE_DATA_LEN 256
98#define PMCRAID_ADD_CMD_PARAM_LEN 48
99
100#define PMCRAID_MAX_BUS_TO_SCAN 1
101#define PMCRAID_MAX_NUM_TARGETS_PER_BUS 256
102#define PMCRAID_MAX_NUM_LUNS_PER_TARGET 8
103
104/* IOA bus/target/lun number of IOA resources */
105#define PMCRAID_IOA_BUS_ID 0xfe
106#define PMCRAID_IOA_TARGET_ID 0xff
107#define PMCRAID_IOA_LUN_ID 0xff
108#define PMCRAID_VSET_BUS_ID 0x1
109#define PMCRAID_VSET_LUN_ID 0x0
110#define PMCRAID_PHYS_BUS_ID 0x0
111#define PMCRAID_VIRTUAL_ENCL_BUS_ID 0x8
Anil Ravindranath729c8452009-11-20 09:39:30 -0800112#define PMCRAID_MAX_VSET_TARGETS 0x7F
Anil Ravindranath89a36812009-08-25 17:35:18 -0700113#define PMCRAID_MAX_VSET_LUNS_PER_TARGET 8
114
115#define PMCRAID_IOA_MAX_SECTORS 32767
116#define PMCRAID_VSET_MAX_SECTORS 512
117#define PMCRAID_MAX_CMD_PER_LUN 254
118
119/* Number of configuration table entries (resources) */
120#define PMCRAID_MAX_NUM_OF_VSETS 240
121
122/* Todo : Check max limit for Phase 1 */
123#define PMCRAID_MAX_NUM_OF_PHY_DEVS 256
124
125/* MAX_NUM_OF_DEVS includes 1 FP, 1 Dummy Enclosure device */
126#define PMCRAID_MAX_NUM_OF_DEVS \
127 (PMCRAID_MAX_NUM_OF_VSETS + PMCRAID_MAX_NUM_OF_PHY_DEVS + 2)
128
129#define PMCRAID_MAX_RESOURCES PMCRAID_MAX_NUM_OF_DEVS
130
131/* Adapter Commands used by driver */
132#define PMCRAID_QUERY_RESOURCE_STATE 0xC2
133#define PMCRAID_RESET_DEVICE 0xC3
134/* options to select reset target */
135#define ENABLE_RESET_MODIFIER 0x80
136#define RESET_DEVICE_LUN 0x40
137#define RESET_DEVICE_TARGET 0x20
138#define RESET_DEVICE_BUS 0x10
139
140#define PMCRAID_IDENTIFY_HRRQ 0xC4
141#define PMCRAID_QUERY_IOA_CONFIG 0xC5
142#define PMCRAID_QUERY_CMD_STATUS 0xCB
143#define PMCRAID_ABORT_CMD 0xC7
144
145/* CANCEL ALL command, provides option for setting SYNC_COMPLETE
146 * on the target resources for which commands got cancelled
147 */
148#define PMCRAID_CANCEL_ALL_REQUESTS 0xCE
149#define PMCRAID_SYNC_COMPLETE_AFTER_CANCEL PMC_BIT8(0)
150
151/* HCAM command and types of HCAM supported by IOA */
152#define PMCRAID_HOST_CONTROLLED_ASYNC 0xCF
153#define PMCRAID_HCAM_CODE_CONFIG_CHANGE 0x01
154#define PMCRAID_HCAM_CODE_LOG_DATA 0x02
155
156/* IOA shutdown command and various shutdown types */
157#define PMCRAID_IOA_SHUTDOWN 0xF7
158#define PMCRAID_SHUTDOWN_NORMAL 0x00
159#define PMCRAID_SHUTDOWN_PREPARE_FOR_NORMAL 0x40
160#define PMCRAID_SHUTDOWN_NONE 0x100
161#define PMCRAID_SHUTDOWN_ABBREV 0x80
162
163/* SET SUPPORTED DEVICES command and the option to select all the
164 * devices to be supported
165 */
166#define PMCRAID_SET_SUPPORTED_DEVICES 0xFB
167#define ALL_DEVICES_SUPPORTED PMC_BIT8(0)
168
169/* This option is used with SCSI WRITE_BUFFER command */
170#define PMCRAID_WR_BUF_DOWNLOAD_AND_SAVE 0x05
171
172/* IOASC Codes used by driver */
173#define PMCRAID_IOASC_SENSE_MASK 0xFFFFFF00
174#define PMCRAID_IOASC_SENSE_KEY(ioasc) ((ioasc) >> 24)
175#define PMCRAID_IOASC_SENSE_CODE(ioasc) (((ioasc) & 0x00ff0000) >> 16)
176#define PMCRAID_IOASC_SENSE_QUAL(ioasc) (((ioasc) & 0x0000ff00) >> 8)
177#define PMCRAID_IOASC_SENSE_STATUS(ioasc) ((ioasc) & 0x000000ff)
178
179#define PMCRAID_IOASC_GOOD_COMPLETION 0x00000000
180#define PMCRAID_IOASC_NR_INIT_CMD_REQUIRED 0x02040200
181#define PMCRAID_IOASC_NR_IOA_RESET_REQUIRED 0x02048000
182#define PMCRAID_IOASC_NR_SYNC_REQUIRED 0x023F0000
183#define PMCRAID_IOASC_ME_READ_ERROR_NO_REALLOC 0x03110C00
184#define PMCRAID_IOASC_HW_CANNOT_COMMUNICATE 0x04050000
185#define PMCRAID_IOASC_HW_DEVICE_TIMEOUT 0x04080100
186#define PMCRAID_IOASC_HW_DEVICE_BUS_STATUS_ERROR 0x04448500
187#define PMCRAID_IOASC_HW_IOA_RESET_REQUIRED 0x04448600
188#define PMCRAID_IOASC_IR_INVALID_RESOURCE_HANDLE 0x05250000
189#define PMCRAID_IOASC_AC_TERMINATED_BY_HOST 0x0B5A0000
190#define PMCRAID_IOASC_UA_BUS_WAS_RESET 0x06290000
191#define PMCRAID_IOASC_UA_BUS_WAS_RESET_BY_OTHER 0x06298000
192
193/* Driver defined IOASCs */
194#define PMCRAID_IOASC_IOA_WAS_RESET 0x10000001
195#define PMCRAID_IOASC_PCI_ACCESS_ERROR 0x10000002
196
197/* Various timeout values (in milliseconds) used. If any of these are chip
198 * specific, move them to pmcraid_chip_details structure.
199 */
200#define PMCRAID_PCI_DEASSERT_TIMEOUT 2000
201#define PMCRAID_BIST_TIMEOUT 2000
202#define PMCRAID_AENWAIT_TIMEOUT 5000
203#define PMCRAID_TRANSOP_TIMEOUT 60000
204
205#define PMCRAID_RESET_TIMEOUT (2 * HZ)
206#define PMCRAID_CHECK_FOR_RESET_TIMEOUT ((HZ / 10))
207#define PMCRAID_VSET_IO_TIMEOUT (60 * HZ)
208#define PMCRAID_INTERNAL_TIMEOUT (60 * HZ)
209#define PMCRAID_SHUTDOWN_TIMEOUT (150 * HZ)
210#define PMCRAID_RESET_BUS_TIMEOUT (60 * HZ)
211#define PMCRAID_RESET_HOST_TIMEOUT (150 * HZ)
212#define PMCRAID_REQUEST_SENSE_TIMEOUT (30 * HZ)
213#define PMCRAID_SET_SUP_DEV_TIMEOUT (2 * 60 * HZ)
214
215/* structure to represent a scatter-gather element (IOADL descriptor) */
216struct pmcraid_ioadl_desc {
217 __le64 address;
218 __le32 data_len;
219 __u8 reserved[3];
220 __u8 flags;
221} __attribute__((packed, aligned(PMCRAID_IOADL_ALIGNMENT)));
222
223/* pmcraid_ioadl_desc.flags values */
224#define IOADL_FLAGS_CHAINED PMC_BIT8(0)
225#define IOADL_FLAGS_LAST_DESC PMC_BIT8(1)
226#define IOADL_FLAGS_READ_LAST PMC_BIT8(1)
227#define IOADL_FLAGS_WRITE_LAST PMC_BIT8(1)
228
229
230/* additional IOARCB data which can be CDB or additional request parameters
231 * or list of IOADLs. Firmware supports max of 512 bytes for IOARCB, hence then
232 * number of IOADLs are limted to 27. In case they are more than 27, they will
233 * be used in chained form
234 */
235struct pmcraid_ioarcb_add_data {
236 union {
237 struct pmcraid_ioadl_desc ioadl[PMCRAID_IOADLS_INTERNAL];
238 __u8 add_cmd_params[PMCRAID_ADD_CMD_PARAM_LEN];
239 } u;
240};
241
242/*
243 * IOA Request Control Block
244 */
245struct pmcraid_ioarcb {
246 __le64 ioarcb_bus_addr;
247 __le32 resource_handle;
248 __le32 response_handle;
249 __le64 ioadl_bus_addr;
250 __le32 ioadl_length;
251 __le32 data_transfer_length;
252 __le64 ioasa_bus_addr;
253 __le16 ioasa_len;
254 __le16 cmd_timeout;
255 __le16 add_cmd_param_offset;
256 __le16 add_cmd_param_length;
257 __le32 reserved1[2];
258 __le32 reserved2;
259 __u8 request_type;
260 __u8 request_flags0;
261 __u8 request_flags1;
262 __u8 hrrq_id;
263 __u8 cdb[PMCRAID_MAX_CDB_LEN];
264 struct pmcraid_ioarcb_add_data add_data;
265} __attribute__((packed, aligned(PMCRAID_IOARCB_ALIGNMENT)));
266
267/* well known resource handle values */
268#define PMCRAID_IOA_RES_HANDLE 0xffffffff
269#define PMCRAID_INVALID_RES_HANDLE 0
270
271/* pmcraid_ioarcb.request_type values */
272#define REQ_TYPE_SCSI 0x00
273#define REQ_TYPE_IOACMD 0x01
274#define REQ_TYPE_HCAM 0x02
275
276/* pmcraid_ioarcb.flags0 values */
277#define TRANSFER_DIR_WRITE PMC_BIT8(0)
278#define INHIBIT_UL_CHECK PMC_BIT8(2)
279#define SYNC_OVERRIDE PMC_BIT8(3)
280#define SYNC_COMPLETE PMC_BIT8(4)
281#define NO_LINK_DESCS PMC_BIT8(5)
282
283/* pmcraid_ioarcb.flags1 values */
284#define DELAY_AFTER_RESET PMC_BIT8(0)
285#define TASK_TAG_SIMPLE 0x10
286#define TASK_TAG_ORDERED 0x20
287#define TASK_TAG_QUEUE_HEAD 0x30
288
289/* toggle bit offset in response handle */
290#define HRRQ_TOGGLE_BIT 0x01
291#define HRRQ_RESPONSE_BIT 0x02
292
293/* IOA Status Area */
294struct pmcraid_ioasa_vset {
295 __le32 failing_lba_hi;
296 __le32 failing_lba_lo;
297 __le32 reserved;
298} __attribute__((packed, aligned(4)));
299
300struct pmcraid_ioasa {
301 __le32 ioasc;
302 __le16 returned_status_length;
303 __le16 available_status_length;
304 __le32 residual_data_length;
305 __le32 ilid;
306 __le32 fd_ioasc;
307 __le32 fd_res_address;
308 __le32 fd_res_handle;
309 __le32 reserved;
310
311 /* resource specific sense information */
312 union {
313 struct pmcraid_ioasa_vset vset;
314 } u;
315
316 /* IOA autosense data */
317 __le16 auto_sense_length;
318 __le16 error_data_length;
319 __u8 sense_data[PMCRAID_SENSE_DATA_LEN];
320} __attribute__((packed, aligned(4)));
321
322#define PMCRAID_DRIVER_ILID 0xffffffff
323
324/* Config Table Entry per Resource */
325struct pmcraid_config_table_entry {
326 __u8 resource_type;
327 __u8 bus_protocol;
328 __le16 array_id;
329 __u8 common_flags0;
330 __u8 common_flags1;
331 __u8 unique_flags0;
332 __u8 unique_flags1; /*also used as vset target_id */
333 __le32 resource_handle;
334 __le32 resource_address;
335 __u8 device_id[PMCRAID_DEVICE_ID_LEN];
336 __u8 lun[PMCRAID_LUN_LEN];
337} __attribute__((packed, aligned(4)));
338
339/* resource types (config_table_entry.resource_type values) */
340#define RES_TYPE_AF_DASD 0x00
341#define RES_TYPE_GSCSI 0x01
342#define RES_TYPE_VSET 0x02
343#define RES_TYPE_IOA_FP 0xFF
344
345#define RES_IS_IOA(res) ((res).resource_type == RES_TYPE_IOA_FP)
346#define RES_IS_GSCSI(res) ((res).resource_type == RES_TYPE_GSCSI)
347#define RES_IS_VSET(res) ((res).resource_type == RES_TYPE_VSET)
348#define RES_IS_AFDASD(res) ((res).resource_type == RES_TYPE_AF_DASD)
349
350/* bus_protocol values used by driver */
351#define RES_TYPE_VENCLOSURE 0x8
352
353/* config_table_entry.common_flags0 */
354#define MULTIPATH_RESOURCE PMC_BIT32(0)
355
356/* unique_flags1 */
357#define IMPORT_MODE_MANUAL PMC_BIT8(0)
358
359/* well known resource handle values */
360#define RES_HANDLE_IOA 0xFFFFFFFF
361#define RES_HANDLE_NONE 0x00000000
362
363/* well known resource address values */
364#define RES_ADDRESS_IOAFP 0xFEFFFFFF
365#define RES_ADDRESS_INVALID 0xFFFFFFFF
366
367/* BUS/TARGET/LUN values from resource_addrr */
368#define RES_BUS(res_addr) (le32_to_cpu(res_addr) & 0xFF)
369#define RES_TARGET(res_addr) ((le32_to_cpu(res_addr) >> 16) & 0xFF)
370#define RES_LUN(res_addr) 0x0
371
372/* configuration table structure */
373struct pmcraid_config_table {
374 __le16 num_entries;
375 __u8 table_format;
376 __u8 reserved1;
377 __u8 flags;
378 __u8 reserved2[11];
379 struct pmcraid_config_table_entry entries[PMCRAID_MAX_RESOURCES];
380} __attribute__((packed, aligned(4)));
381
382/* config_table.flags value */
383#define MICROCODE_UPDATE_REQUIRED PMC_BIT32(0)
384
385/*
386 * HCAM format
387 */
388#define PMCRAID_HOSTRCB_LDNSIZE 4056
389
390/* Error log notification format */
391struct pmcraid_hostrcb_error {
392 __le32 fd_ioasc;
393 __le32 fd_ra;
394 __le32 fd_rh;
395 __le32 prc;
396 union {
397 __u8 data[PMCRAID_HOSTRCB_LDNSIZE];
398 } u;
399} __attribute__ ((packed, aligned(4)));
400
401struct pmcraid_hcam_hdr {
402 __u8 op_code;
403 __u8 notification_type;
404 __u8 notification_lost;
405 __u8 flags;
406 __u8 overlay_id;
407 __u8 reserved1[3];
408 __le32 ilid;
409 __le32 timestamp1;
410 __le32 timestamp2;
411 __le32 data_len;
412} __attribute__((packed, aligned(4)));
413
414#define PMCRAID_AEN_GROUP 0x3
415
416struct pmcraid_hcam_ccn {
417 struct pmcraid_hcam_hdr header;
418 struct pmcraid_config_table_entry cfg_entry;
419} __attribute__((packed, aligned(4)));
420
421struct pmcraid_hcam_ldn {
422 struct pmcraid_hcam_hdr header;
423 struct pmcraid_hostrcb_error error_log;
424} __attribute__((packed, aligned(4)));
425
426/* pmcraid_hcam.op_code values */
427#define HOSTRCB_TYPE_CCN 0xE1
428#define HOSTRCB_TYPE_LDN 0xE2
429
430/* pmcraid_hcam.notification_type values */
431#define NOTIFICATION_TYPE_ENTRY_CHANGED 0x0
432#define NOTIFICATION_TYPE_ENTRY_NEW 0x1
433#define NOTIFICATION_TYPE_ENTRY_DELETED 0x2
434#define NOTIFICATION_TYPE_ERROR_LOG 0x10
435#define NOTIFICATION_TYPE_INFORMATION_LOG 0x11
436
437#define HOSTRCB_NOTIFICATIONS_LOST PMC_BIT8(0)
438
439/* pmcraid_hcam.flags values */
440#define HOSTRCB_INTERNAL_OP_ERROR PMC_BIT8(0)
441#define HOSTRCB_ERROR_RESPONSE_SENT PMC_BIT8(1)
442
443/* pmcraid_hcam.overlay_id values */
444#define HOSTRCB_OVERLAY_ID_08 0x08
445#define HOSTRCB_OVERLAY_ID_09 0x09
446#define HOSTRCB_OVERLAY_ID_11 0x11
447#define HOSTRCB_OVERLAY_ID_12 0x12
448#define HOSTRCB_OVERLAY_ID_13 0x13
449#define HOSTRCB_OVERLAY_ID_14 0x14
450#define HOSTRCB_OVERLAY_ID_16 0x16
451#define HOSTRCB_OVERLAY_ID_17 0x17
452#define HOSTRCB_OVERLAY_ID_20 0x20
453#define HOSTRCB_OVERLAY_ID_FF 0xFF
454
455/* Implementation specific card details */
456struct pmcraid_chip_details {
457 /* hardware register offsets */
458 unsigned long ioastatus;
459 unsigned long ioarrin;
460 unsigned long mailbox;
461 unsigned long global_intr_mask;
462 unsigned long ioa_host_intr;
463 unsigned long ioa_host_intr_clr;
464 unsigned long ioa_host_mask;
465 unsigned long ioa_host_mask_clr;
466 unsigned long host_ioa_intr;
467 unsigned long host_ioa_intr_clr;
468
469 /* timeout used during transitional to operational state */
470 unsigned long transop_timeout;
471};
472
473/* IOA to HOST doorbells (interrupts) */
474#define INTRS_TRANSITION_TO_OPERATIONAL PMC_BIT32(0)
475#define INTRS_IOARCB_TRANSFER_FAILED PMC_BIT32(3)
476#define INTRS_IOA_UNIT_CHECK PMC_BIT32(4)
477#define INTRS_NO_HRRQ_FOR_CMD_RESPONSE PMC_BIT32(5)
478#define INTRS_CRITICAL_OP_IN_PROGRESS PMC_BIT32(6)
479#define INTRS_IO_DEBUG_ACK PMC_BIT32(7)
480#define INTRS_IOARRIN_LOST PMC_BIT32(27)
481#define INTRS_SYSTEM_BUS_MMIO_ERROR PMC_BIT32(28)
482#define INTRS_IOA_PROCESSOR_ERROR PMC_BIT32(29)
483#define INTRS_HRRQ_VALID PMC_BIT32(30)
484#define INTRS_OPERATIONAL_STATUS PMC_BIT32(0)
485
486/* Host to IOA Doorbells */
487#define DOORBELL_RUNTIME_RESET PMC_BIT32(1)
488#define DOORBELL_IOA_RESET_ALERT PMC_BIT32(7)
489#define DOORBELL_IOA_DEBUG_ALERT PMC_BIT32(9)
490#define DOORBELL_ENABLE_DESTRUCTIVE_DIAGS PMC_BIT32(8)
491#define DOORBELL_IOA_START_BIST PMC_BIT32(23)
492#define DOORBELL_RESET_IOA PMC_BIT32(31)
493
494/* Global interrupt mask register value */
495#define GLOBAL_INTERRUPT_MASK 0x4ULL
496
497#define PMCRAID_ERROR_INTERRUPTS (INTRS_IOARCB_TRANSFER_FAILED | \
498 INTRS_IOA_UNIT_CHECK | \
499 INTRS_NO_HRRQ_FOR_CMD_RESPONSE | \
500 INTRS_IOARRIN_LOST | \
501 INTRS_SYSTEM_BUS_MMIO_ERROR | \
502 INTRS_IOA_PROCESSOR_ERROR)
503
504#define PMCRAID_PCI_INTERRUPTS (PMCRAID_ERROR_INTERRUPTS | \
505 INTRS_HRRQ_VALID | \
506 INTRS_CRITICAL_OP_IN_PROGRESS |\
507 INTRS_TRANSITION_TO_OPERATIONAL)
508
509/* control_block, associated with each of the commands contains IOARCB, IOADLs
510 * memory for IOASA. Additional 3 * 16 bytes are allocated in order to support
511 * additional request parameters (of max size 48) any command.
512 */
513struct pmcraid_control_block {
514 struct pmcraid_ioarcb ioarcb;
515 struct pmcraid_ioadl_desc ioadl[PMCRAID_IOADLS_EXTERNAL + 3];
516 struct pmcraid_ioasa ioasa;
517} __attribute__ ((packed, aligned(PMCRAID_IOARCB_ALIGNMENT)));
518
519/* pmcraid_sglist - Scatter-gather list allocated for passthrough ioctls
520 */
521struct pmcraid_sglist {
522 u32 order;
523 u32 num_sg;
524 u32 num_dma_sg;
525 u32 buffer_len;
526 struct scatterlist scatterlist[1];
527};
528
529/* pmcraid_cmd - LLD representation of SCSI command */
530struct pmcraid_cmd {
531
532 /* Ptr and bus address of DMA.able control block for this command */
533 struct pmcraid_control_block *ioa_cb;
534 dma_addr_t ioa_cb_bus_addr;
535
536 /* sense buffer for REQUEST SENSE command if firmware is not sending
537 * auto sense data
538 */
539 dma_addr_t sense_buffer_dma;
540 dma_addr_t dma_handle;
541 u8 *sense_buffer;
542
543 /* pointer to mid layer structure of SCSI commands */
544 struct scsi_cmnd *scsi_cmd;
545
546 struct list_head free_list;
547 struct completion wait_for_completion;
548 struct timer_list timer; /* needed for internal commands */
549 u32 timeout; /* current timeout value */
550 u32 index; /* index into the command list */
551 u8 completion_req; /* for handling internal commands */
552 u8 release; /* for handling completions */
553
554 void (*cmd_done) (struct pmcraid_cmd *);
555 struct pmcraid_instance *drv_inst;
556
557 struct pmcraid_sglist *sglist; /* used for passthrough IOCTLs */
558
559 /* scratch used during reset sequence */
560 union {
561 unsigned long time_left;
562 struct pmcraid_resource_entry *res;
563 } u;
564};
565
566/*
567 * Interrupt registers of IOA
568 */
569struct pmcraid_interrupts {
570 void __iomem *ioa_host_interrupt_reg;
571 void __iomem *ioa_host_interrupt_clr_reg;
572 void __iomem *ioa_host_interrupt_mask_reg;
573 void __iomem *ioa_host_interrupt_mask_clr_reg;
574 void __iomem *global_interrupt_mask_reg;
575 void __iomem *host_ioa_interrupt_reg;
576 void __iomem *host_ioa_interrupt_clr_reg;
577};
578
579/* ISR parameters LLD allocates (one for each MSI-X if enabled) vectors */
580struct pmcraid_isr_param {
581 u8 hrrq_id; /* hrrq entry index */
582 u16 vector; /* allocated msi-x vector */
583 struct pmcraid_instance *drv_inst;
584};
585
586/* AEN message header sent as part of event data to applications */
587struct pmcraid_aen_msg {
588 u32 hostno;
589 u32 length;
590 u8 reserved[8];
591 u8 data[0];
592};
593
594struct pmcraid_hostrcb {
595 struct pmcraid_instance *drv_inst;
596 struct pmcraid_aen_msg *msg;
597 struct pmcraid_hcam_hdr *hcam; /* pointer to hcam buffer */
598 struct pmcraid_cmd *cmd; /* pointer to command block used */
599 dma_addr_t baddr; /* system address of hcam buffer */
600 atomic_t ignore; /* process HCAM response ? */
601};
602
603#define PMCRAID_AEN_HDR_SIZE sizeof(struct pmcraid_aen_msg)
604
605
606
607/*
608 * Per adapter structure maintained by LLD
609 */
610struct pmcraid_instance {
611 /* Array of allowed-to-be-exposed resources, initialized from
612 * Configutation Table, later updated with CCNs
613 */
614 struct pmcraid_resource_entry *res_entries;
615
616 struct list_head free_res_q; /* res_entries lists for easy lookup */
617 struct list_head used_res_q; /* List of to be exposed resources */
618 spinlock_t resource_lock; /* spinlock to protect resource list */
619
620 void __iomem *mapped_dma_addr;
621 void __iomem *ioa_status; /* Iomapped IOA status register */
622 void __iomem *mailbox; /* Iomapped mailbox register */
623 void __iomem *ioarrin; /* IOmapped IOARR IN register */
624
625 struct pmcraid_interrupts int_regs;
626 struct pmcraid_chip_details *chip_cfg;
627
628 /* HostRCBs needed for HCAM */
629 struct pmcraid_hostrcb ldn;
630 struct pmcraid_hostrcb ccn;
631
632
633 /* Bus address of start of HRRQ */
634 dma_addr_t hrrq_start_bus_addr[PMCRAID_NUM_MSIX_VECTORS];
635
636 /* Pointer to 1st entry of HRRQ */
637 __be32 *hrrq_start[PMCRAID_NUM_MSIX_VECTORS];
638
639 /* Pointer to last entry of HRRQ */
640 __be32 *hrrq_end[PMCRAID_NUM_MSIX_VECTORS];
641
642 /* Pointer to current pointer of hrrq */
643 __be32 *hrrq_curr[PMCRAID_NUM_MSIX_VECTORS];
644
645 /* Lock for HRRQ access */
646 spinlock_t hrrq_lock[PMCRAID_NUM_MSIX_VECTORS];
647
648 /* Expected toggle bit at host */
649 u8 host_toggle_bit[PMCRAID_NUM_MSIX_VECTORS];
650
651 /* No of Reset IOA retries . IOA marked dead if threshold exceeds */
652 u8 ioa_reset_attempts;
653#define PMCRAID_RESET_ATTEMPTS 3
654
655 /* Wait Q for threads to wait for Reset IOA completion */
656 wait_queue_head_t reset_wait_q;
657 struct pmcraid_cmd *reset_cmd;
658
659 /* structures for supporting SIGIO based AEN. */
660 struct fasync_struct *aen_queue;
661 struct mutex aen_queue_lock; /* lock for aen subscribers list */
662 struct cdev cdev;
663
664 struct Scsi_Host *host; /* mid layer interface structure handle */
665 struct pci_dev *pdev; /* PCI device structure handle */
666
667 u8 current_log_level; /* default level for logging IOASC errors */
668
669 u8 num_hrrq; /* Number of interrupt vectors allocated */
670 dev_t dev; /* Major-Minor numbers for Char device */
671
672 /* Used as ISR handler argument */
673 struct pmcraid_isr_param hrrq_vector[PMCRAID_NUM_MSIX_VECTORS];
674
675 /* configuration table */
676 struct pmcraid_config_table *cfg_table;
677 dma_addr_t cfg_table_bus_addr;
678
679 /* structures related to command blocks */
680 struct kmem_cache *cmd_cachep; /* cache for cmd blocks */
681 struct pci_pool *control_pool; /* pool for control blocks */
682 char cmd_pool_name[64]; /* name of cmd cache */
683 char ctl_pool_name[64]; /* name of control cache */
684
685 struct pmcraid_cmd *cmd_list[PMCRAID_MAX_CMD];
686
687 struct list_head free_cmd_pool;
688 struct list_head pending_cmd_pool;
689 spinlock_t free_pool_lock; /* free pool lock */
690 spinlock_t pending_pool_lock; /* pending pool lock */
691
692 /* No of IO commands pending with FW */
693 atomic_t outstanding_cmds;
694
695 /* should add/delete resources to mid-layer now ?*/
696 atomic_t expose_resources;
697
698 /* Tasklet to handle deferred processing */
699 struct tasklet_struct isr_tasklet[PMCRAID_NUM_MSIX_VECTORS];
700
701 /* Work-queue (Shared) for deferred reset processing */
702 struct work_struct worker_q;
703
704
705 u32 ioa_state:4; /* For IOA Reset sequence FSM */
706#define IOA_STATE_OPERATIONAL 0x0
707#define IOA_STATE_UNKNOWN 0x1
708#define IOA_STATE_DEAD 0x2
709#define IOA_STATE_IN_SOFT_RESET 0x3
710#define IOA_STATE_IN_HARD_RESET 0x4
711#define IOA_STATE_IN_RESET_ALERT 0x5
712#define IOA_STATE_IN_BRINGDOWN 0x6
713#define IOA_STATE_IN_BRINGUP 0x7
714
715 u32 ioa_reset_in_progress:1; /* true if IOA reset is in progress */
716 u32 ioa_hard_reset:1; /* TRUE if Hard Reset is needed */
717 u32 ioa_unit_check:1; /* Indicates Unit Check condition */
718 u32 ioa_bringdown:1; /* whether IOA needs to be brought down */
719 u32 force_ioa_reset:1; /* force adapter reset ? */
720 u32 reinit_cfg_table:1; /* reinit config table due to lost CCN */
721 u32 ioa_shutdown_type:2;/* shutdown type used during reset */
722#define SHUTDOWN_NONE 0x0
723#define SHUTDOWN_NORMAL 0x1
724#define SHUTDOWN_ABBREV 0x2
725
726};
727
728/* LLD maintained resource entry structure */
729struct pmcraid_resource_entry {
730 struct list_head queue; /* link to "to be exposed" resources */
731 struct pmcraid_config_table_entry cfg_entry;
732 struct scsi_device *scsi_dev; /* Link scsi_device structure */
733 atomic_t read_failures; /* count of failed READ commands */
734 atomic_t write_failures; /* count of failed WRITE commands */
735
736 /* To indicate add/delete/modify during CCN */
737 u8 change_detected;
738#define RES_CHANGE_ADD 0x1 /* add this to mid-layer */
739#define RES_CHANGE_DEL 0x2 /* remove this from mid-layer */
740
741 u8 reset_progress; /* Device is resetting */
742
743 /*
744 * When IOA asks for sync (i.e. IOASC = Not Ready, Sync Required), this
745 * flag will be set, mid layer will be asked to retry. In the next
746 * attempt, this flag will be checked in queuecommand() to set
747 * SYNC_COMPLETE flag in IOARCB (flag_0).
748 */
749 u8 sync_reqd;
750
751 /* target indicates the mapped target_id assigned to this resource if
752 * this is VSET resource. For non-VSET resources this will be un-used
753 * or zero
754 */
755 u8 target;
756};
757
758/* Data structures used in IOASC error code logging */
759struct pmcraid_ioasc_error {
760 u32 ioasc_code; /* IOASC code */
761 u8 log_level; /* default log level assignment. */
762 char *error_string;
763};
764
765/* Initial log_level assignments for various IOASCs */
766#define IOASC_LOG_LEVEL_NONE 0x0 /* no logging */
767#define IOASC_LOG_LEVEL_MUST 0x1 /* must log: all high-severity errors */
768#define IOASC_LOG_LEVEL_HARD 0x2 /* optional – low severity errors */
769
770/* Error information maintained by LLD. LLD initializes the pmcraid_error_table
771 * statically.
772 */
773static struct pmcraid_ioasc_error pmcraid_ioasc_error_table[] = {
774 {0x01180600, IOASC_LOG_LEVEL_MUST,
775 "Recovered Error, soft media error, sector reassignment suggested"},
776 {0x015D0000, IOASC_LOG_LEVEL_MUST,
André Goddard Rosaaf901ca2009-11-14 13:09:05 -0200777 "Recovered Error, failure prediction threshold exceeded"},
Anil Ravindranath89a36812009-08-25 17:35:18 -0700778 {0x015D9200, IOASC_LOG_LEVEL_MUST,
André Goddard Rosaaf901ca2009-11-14 13:09:05 -0200779 "Recovered Error, soft Cache Card Battery error threshold"},
Anil Ravindranath89a36812009-08-25 17:35:18 -0700780 {0x015D9200, IOASC_LOG_LEVEL_MUST,
André Goddard Rosaaf901ca2009-11-14 13:09:05 -0200781 "Recovered Error, soft Cache Card Battery error threshold"},
Anil Ravindranath89a36812009-08-25 17:35:18 -0700782 {0x02048000, IOASC_LOG_LEVEL_MUST,
783 "Not Ready, IOA Reset Required"},
784 {0x02408500, IOASC_LOG_LEVEL_MUST,
785 "Not Ready, IOA microcode download required"},
786 {0x03110B00, IOASC_LOG_LEVEL_MUST,
787 "Medium Error, data unreadable, reassignment suggested"},
788 {0x03110C00, IOASC_LOG_LEVEL_MUST,
789 "Medium Error, data unreadable do not reassign"},
790 {0x03310000, IOASC_LOG_LEVEL_MUST,
791 "Medium Error, media corrupted"},
792 {0x04050000, IOASC_LOG_LEVEL_MUST,
793 "Hardware Error, IOA can't communicate with device"},
794 {0x04080000, IOASC_LOG_LEVEL_MUST,
795 "Hardware Error, device bus error"},
796 {0x04080000, IOASC_LOG_LEVEL_MUST,
797 "Hardware Error, device bus is not functioning"},
798 {0x04118000, IOASC_LOG_LEVEL_MUST,
799 "Hardware Error, IOA reserved area data check"},
800 {0x04118100, IOASC_LOG_LEVEL_MUST,
801 "Hardware Error, IOA reserved area invalid data pattern"},
802 {0x04118200, IOASC_LOG_LEVEL_MUST,
803 "Hardware Error, IOA reserved area LRC error"},
804 {0x04320000, IOASC_LOG_LEVEL_MUST,
805 "Hardware Error, reassignment space exhausted"},
806 {0x04330000, IOASC_LOG_LEVEL_MUST,
807 "Hardware Error, data transfer underlength error"},
808 {0x04330000, IOASC_LOG_LEVEL_MUST,
809 "Hardware Error, data transfer overlength error"},
810 {0x04418000, IOASC_LOG_LEVEL_MUST,
811 "Hardware Error, PCI bus error"},
812 {0x04440000, IOASC_LOG_LEVEL_MUST,
813 "Hardware Error, device error"},
814 {0x04448300, IOASC_LOG_LEVEL_MUST,
815 "Hardware Error, undefined device response"},
816 {0x04448400, IOASC_LOG_LEVEL_MUST,
817 "Hardware Error, IOA microcode error"},
818 {0x04448600, IOASC_LOG_LEVEL_MUST,
819 "Hardware Error, IOA reset required"},
820 {0x04449200, IOASC_LOG_LEVEL_MUST,
821 "Hardware Error, hard Cache Fearuee Card Battery error"},
822 {0x0444A000, IOASC_LOG_LEVEL_MUST,
823 "Hardware Error, failed device altered"},
824 {0x0444A200, IOASC_LOG_LEVEL_MUST,
825 "Hardware Error, data check after reassignment"},
826 {0x0444A300, IOASC_LOG_LEVEL_MUST,
827 "Hardware Error, LRC error after reassignment"},
828 {0x044A0000, IOASC_LOG_LEVEL_MUST,
829 "Hardware Error, device bus error (msg/cmd phase)"},
830 {0x04670400, IOASC_LOG_LEVEL_MUST,
831 "Hardware Error, new device can't be used"},
832 {0x04678000, IOASC_LOG_LEVEL_MUST,
833 "Hardware Error, invalid multiadapter configuration"},
834 {0x04678100, IOASC_LOG_LEVEL_MUST,
835 "Hardware Error, incorrect connection between enclosures"},
836 {0x04678200, IOASC_LOG_LEVEL_MUST,
837 "Hardware Error, connections exceed IOA design limits"},
838 {0x04678300, IOASC_LOG_LEVEL_MUST,
839 "Hardware Error, incorrect multipath connection"},
840 {0x04679000, IOASC_LOG_LEVEL_MUST,
841 "Hardware Error, command to LUN failed"},
842 {0x064C8000, IOASC_LOG_LEVEL_HARD,
843 "Unit Attention, cache exists for missing/failed device"},
844 {0x06670100, IOASC_LOG_LEVEL_HARD,
845 "Unit Attention, incompatible exposed mode device"},
846 {0x06670600, IOASC_LOG_LEVEL_HARD,
847 "Unit Attention, attachment of logical unit failed"},
848 {0x06678000, IOASC_LOG_LEVEL_MUST,
849 "Unit Attention, cables exceed connective design limit"},
850 {0x06678300, IOASC_LOG_LEVEL_MUST,
851 "Unit Attention, incomplete multipath connection between" \
852 "IOA and enclosure"},
853 {0x06678400, IOASC_LOG_LEVEL_MUST,
854 "Unit Attention, incomplete multipath connection between" \
855 "device and enclosure"},
856 {0x06678500, IOASC_LOG_LEVEL_MUST,
857 "Unit Attention, incomplete multipath connection between" \
858 "IOA and remote IOA"},
859 {0x06678600, IOASC_LOG_LEVEL_HARD,
860 "Unit Attention, missing remote IOA"},
861 {0x06679100, IOASC_LOG_LEVEL_HARD,
862 "Unit Attention, enclosure doesn't support required multipath" \
863 "function"},
864 {0x06698200, IOASC_LOG_LEVEL_HARD,
865 "Unit Attention, corrupt array parity detected on device"},
866 {0x066B0200, IOASC_LOG_LEVEL_MUST,
867 "Unit Attention, array exposed"},
868 {0x066B8200, IOASC_LOG_LEVEL_HARD,
869 "Unit Attention, exposed array is still protected"},
870 {0x066B9200, IOASC_LOG_LEVEL_MUST,
871 "Unit Attention, Multipath redundancy level got worse"},
872 {0x07270000, IOASC_LOG_LEVEL_HARD,
873 "Data Protect, device is read/write protected by IOA"},
874 {0x07278000, IOASC_LOG_LEVEL_HARD,
875 "Data Protect, IOA doesn't support device attribute"},
876 {0x07278100, IOASC_LOG_LEVEL_HARD,
877 "Data Protect, NVRAM mirroring prohibited"},
878 {0x07278400, IOASC_LOG_LEVEL_MUST,
879 "Data Protect, array is short 2 or more devices"},
880 {0x07278600, IOASC_LOG_LEVEL_MUST,
881 "Data Protect, exposed array is short a required device"},
882 {0x07278700, IOASC_LOG_LEVEL_MUST,
883 "Data Protect, array members not at required addresses"},
884 {0x07278800, IOASC_LOG_LEVEL_MUST,
885 "Data Protect, exposed mode device resource address conflict"},
886 {0x07278900, IOASC_LOG_LEVEL_MUST,
887 "Data Protect, incorrect resource address of exposed mode device"},
888 {0x07278A00, IOASC_LOG_LEVEL_MUST,
889 "Data Protect, Array is missing a device and parity is out of sync"},
890 {0x07278B00, IOASC_LOG_LEVEL_MUST,
891 "Data Protect, maximum number of arrays already exist"},
892 {0x07278C00, IOASC_LOG_LEVEL_HARD,
893 "Data Protect, cannot locate cache data for device"},
894 {0x07278D00, IOASC_LOG_LEVEL_HARD,
895 "Data Protect, cache data exits for a changed device"},
896 {0x07279100, IOASC_LOG_LEVEL_MUST,
897 "Data Protect, detection of a device requiring format"},
898 {0x07279200, IOASC_LOG_LEVEL_MUST,
899 "Data Protect, IOA exceeds maximum number of devices"},
900 {0x07279600, IOASC_LOG_LEVEL_MUST,
901 "Data Protect, missing array, volume set is not functional"},
902 {0x07279700, IOASC_LOG_LEVEL_MUST,
903 "Data Protect, single device for a volume set"},
904 {0x07279800, IOASC_LOG_LEVEL_MUST,
905 "Data Protect, missing multiple devices for a volume set"},
906 {0x07279900, IOASC_LOG_LEVEL_HARD,
907 "Data Protect, maximum number of volument sets already exists"},
908 {0x07279A00, IOASC_LOG_LEVEL_MUST,
909 "Data Protect, other volume set problem"},
910};
911
912/* macros to help in debugging */
913#define pmcraid_err(...) \
914 printk(KERN_ERR "MaxRAID: "__VA_ARGS__)
915
916#define pmcraid_info(...) \
917 if (pmcraid_debug_log) \
918 printk(KERN_INFO "MaxRAID: "__VA_ARGS__)
919
920/* check if given command is a SCSI READ or SCSI WRITE command */
921#define SCSI_READ_CMD 0x1 /* any of SCSI READ commands */
922#define SCSI_WRITE_CMD 0x2 /* any of SCSI WRITE commands */
923#define SCSI_CMD_TYPE(opcode) \
924({ u8 op = opcode; u8 __type = 0;\
925 if (op == READ_6 || op == READ_10 || op == READ_12 || op == READ_16)\
926 __type = SCSI_READ_CMD;\
927 else if (op == WRITE_6 || op == WRITE_10 || op == WRITE_12 || \
928 op == WRITE_16)\
929 __type = SCSI_WRITE_CMD;\
930 __type;\
931})
932
933#define IS_SCSI_READ_WRITE(opcode) \
934({ u8 __type = SCSI_CMD_TYPE(opcode); \
935 (__type == SCSI_READ_CMD || __type == SCSI_WRITE_CMD) ? 1 : 0;\
936})
937
938
939/*
940 * pmcraid_ioctl_header - definition of header structure that preceeds all the
941 * buffers given as ioctl arguements.
942 *
943 * .signature : always ASCII string, "PMCRAID"
944 * .reserved : not used
945 * .buffer_length : length of the buffer following the header
946 */
947struct pmcraid_ioctl_header {
948 u8 signature[8];
949 u32 reserved;
950 u32 buffer_length;
951};
952
953#define PMCRAID_IOCTL_SIGNATURE "PMCRAID"
954
955
956/*
957 * pmcraid_event_details - defines AEN details that apps can retrieve from LLD
958 *
959 * .rcb_ccn - complete RCB of CCN
960 * .rcb_ldn - complete RCB of CCN
961 */
962struct pmcraid_event_details {
963 struct pmcraid_hcam_ccn rcb_ccn;
964 struct pmcraid_hcam_ldn rcb_ldn;
965};
966
967/*
968 * pmcraid_driver_ioctl_buffer - structure passed as argument to most of the
969 * PMC driver handled ioctls.
970 */
971struct pmcraid_driver_ioctl_buffer {
972 struct pmcraid_ioctl_header ioctl_header;
973 struct pmcraid_event_details event_details;
974};
975
976/*
977 * pmcraid_passthrough_ioctl_buffer - structure given as argument to
978 * passthrough(or firmware handled) IOCTL commands. Note that ioarcb requires
979 * 32-byte alignment so, it is necessary to pack this structure to avoid any
980 * holes between ioctl_header and passthrough buffer
981 *
982 * .ioactl_header : ioctl header
983 * .ioarcb : filled-up ioarcb buffer, driver always reads this buffer
984 * .ioasa : buffer for ioasa, driver fills this with IOASA from firmware
985 * .request_buffer: The I/O buffer (flat), driver reads/writes to this based on
986 * the transfer directions passed in ioarcb.flags0. Contents
987 * of this buffer are valid only when ioarcb.data_transfer_len
988 * is not zero.
989 */
990struct pmcraid_passthrough_ioctl_buffer {
991 struct pmcraid_ioctl_header ioctl_header;
992 struct pmcraid_ioarcb ioarcb;
993 struct pmcraid_ioasa ioasa;
994 u8 request_buffer[1];
995} __attribute__ ((packed));
996
997/*
998 * keys to differentiate between driver handled IOCTLs and passthrough
999 * IOCTLs passed to IOA. driver determines the ioctl type using macro
1000 * _IOC_TYPE
1001 */
1002#define PMCRAID_DRIVER_IOCTL 'D'
1003#define PMCRAID_PASSTHROUGH_IOCTL 'F'
1004
1005#define DRV_IOCTL(n, size) \
1006 _IOC(_IOC_READ|_IOC_WRITE, PMCRAID_DRIVER_IOCTL, (n), (size))
1007
1008#define FMW_IOCTL(n, size) \
1009 _IOC(_IOC_READ|_IOC_WRITE, PMCRAID_PASSTHROUGH_IOCTL, (n), (size))
1010
1011/*
1012 * _ARGSIZE: macro that gives size of the argument type passed to an IOCTL cmd.
1013 * This is to facilitate applications avoiding un-necessary memory allocations.
1014 * For example, most of driver handled ioctls do not require ioarcb, ioasa.
1015 */
1016#define _ARGSIZE(arg) (sizeof(struct pmcraid_ioctl_header) + sizeof(arg))
1017
1018/* Driver handled IOCTL command definitions */
1019
1020#define PMCRAID_IOCTL_RESET_ADAPTER \
1021 DRV_IOCTL(5, sizeof(struct pmcraid_ioctl_header))
1022
1023/* passthrough/firmware handled commands */
1024#define PMCRAID_IOCTL_PASSTHROUGH_COMMAND \
1025 FMW_IOCTL(1, sizeof(struct pmcraid_passthrough_ioctl_buffer))
1026
1027#define PMCRAID_IOCTL_DOWNLOAD_MICROCODE \
1028 FMW_IOCTL(2, sizeof(struct pmcraid_passthrough_ioctl_buffer))
1029
1030
1031#endif /* _PMCRAID_H */