blob: 87a17337c7f638a262a5e530e08c7a1a4eff249c [file] [log] [blame]
Stefan Richter0ee9d712006-04-01 01:42:29 +02001 Kernel Parameters
Linus Torvalds1da177e2005-04-16 15:20:36 -07002 ~~~~~~~~~~~~~~~~~
3
4The following is a consolidated list of the kernel parameters as implemented
5(mostly) by the __setup() macro and sorted into English Dictionary order
6(defined as ignoring all punctuation and sorting digits before letters in a
7case insensitive manner), and with descriptions where known.
8
9Module parameters for loadable modules are specified only as the
10parameter name with optional '=' and value as appropriate, such as:
11
12 modprobe usbcore blinkenlights=1
13
14Module parameters for modules that are built into the kernel image
15are specified on the kernel command line with the module name plus
16'.' plus parameter name, with '=' and value if appropriate, such as:
17
18 usbcore.blinkenlights=1
19
Stefan Richtera901ebb2006-04-01 01:43:18 +020020This document may not be entirely up to date and comprehensive. The command
21"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
22module. Loadable modules, after being loaded into the running kernel, also
23reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
24parameters may be changed at runtime by the command
25"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
26
Stefan Richter6585fa82006-04-01 01:44:30 +020027The parameters listed below are only valid if certain kernel build options were
28enabled and if respective hardware is present. The text in square brackets at
29the beginning of each description states the restrictions within which a
30parameter is applicable:
Linus Torvalds1da177e2005-04-16 15:20:36 -070031
32 ACPI ACPI support is enabled.
33 ALSA ALSA sound support is enabled.
34 APIC APIC support is enabled.
35 APM Advanced Power Management support is enabled.
36 AX25 Appropriate AX.25 support is enabled.
37 CD Appropriate CD support is enabled.
Randy Dunlapa9913042005-10-23 12:57:11 -070038 DRM Direct Rendering Management support is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -070039 EDD BIOS Enhanced Disk Drive Services (EDD) is enabled
40 EFI EFI Partitioning (GPT) is enabled
41 EIDE EIDE/ATAPI support is enabled.
42 FB The frame buffer device is enabled.
43 HW Appropriate hardware is enabled.
44 IA-32 IA-32 aka i386 architecture is enabled.
45 IA-64 IA-64 architecture is enabled.
46 IOSCHED More than one I/O scheduler is enabled.
Adrian Bunk41e2e8b2005-07-12 13:58:33 -070047 IP_PNP IP DHCP, BOOTP, or RARP is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -070048 ISAPNP ISA PnP code is enabled.
49 ISDN Appropriate ISDN support is enabled.
50 JOY Appropriate joystick support is enabled.
51 LP Printer support is enabled.
52 LOOP Loopback device support is enabled.
53 M68k M68k architecture is enabled.
54 These options have more detailed description inside of
55 Documentation/m68k/kernel-options.txt.
56 MCA MCA bus support is enabled.
57 MDA MDA console support is enabled.
58 MOUSE Appropriate mouse support is enabled.
Matthew Wilcox309e57d2006-03-05 22:33:34 -070059 MSI Message Signaled Interrupts (PCI).
Linus Torvalds1da177e2005-04-16 15:20:36 -070060 MTD MTD support is enabled.
61 NET Appropriate network support is enabled.
62 NUMA NUMA support is enabled.
john stultz734efb42006-06-26 00:25:05 -070063 GENERIC_TIME The generic timeofday code is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -070064 NFS Appropriate NFS support is enabled.
65 OSS OSS sound support is enabled.
66 PARIDE The ParIDE subsystem is enabled.
67 PARISC The PA-RISC architecture is enabled.
68 PCI PCI bus support is enabled.
69 PCMCIA The PCMCIA subsystem is enabled.
70 PNP Plug & Play support is enabled.
71 PPC PowerPC architecture is enabled.
72 PPT Parallel port support is enabled.
73 PS2 Appropriate PS/2 support is enabled.
74 RAM RAM disk support is enabled.
75 S390 S390 architecture is enabled.
76 SCSI Appropriate SCSI support is enabled.
77 A lot of drivers has their options described inside of
78 Documentation/scsi/.
79 SELINUX SELinux support is enabled.
80 SERIAL Serial support is enabled.
81 SMP The kernel is an SMP kernel.
82 SPARC Sparc architecture is enabled.
Randy Dunlapa9913042005-10-23 12:57:11 -070083 SWSUSP Software suspend is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -070084 TS Appropriate touchscreen support is enabled.
85 USB USB support is enabled.
86 USBHID USB Human Interface Device support is enabled.
87 V4L Video For Linux support is enabled.
88 VGA The VGA console has been enabled.
89 VT Virtual terminal support is enabled.
90 WDT Watchdog support is enabled.
91 XT IBM PC/XT MFM hard disk support is enabled.
92 X86-64 X86-64 architecture is enabled.
93 More X86-64 boot options can be found in
94 Documentation/x86_64/boot-options.txt .
95
96In addition, the following text indicates that the option:
97
98 BUGS= Relates to possible processor bugs on the said processor.
99 KNL Is a kernel start-up parameter.
100 BOOT Is a boot loader parameter.
101
102Parameters denoted with BOOT are actually interpreted by the boot
103loader, and have no meaning to the kernel directly.
104Do not modify the syntax of boot loader parameters without extreme
105need or coordination with <Documentation/i386/boot.txt>.
106
107Note that ALL kernel parameters listed below are CASE SENSITIVE, and that
108a trailing = on the name of any parameter states that that parameter will
109be entered as an environment variable, whereas its absence indicates that
110it will appear as a kernel argument readable via /proc/cmdline by programs
111running once the system is up.
112
113 53c7xx= [HW,SCSI] Amiga SCSI controllers
114 See header of drivers/scsi/53c7xx.c.
115 See also Documentation/scsi/ncr53c7xx.txt.
116
Randy Dunlapa9913042005-10-23 12:57:11 -0700117 acpi= [HW,ACPI] Advanced Configuration and Power Interface
118 Format: { force | off | ht | strict | noirq }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700119 force -- enable ACPI if default was off
120 off -- disable ACPI if default was on
121 noirq -- do not use ACPI for IRQ routing
122 ht -- run only enough ACPI to enable Hyper Threading
Randy Dunlapa9913042005-10-23 12:57:11 -0700123 strict -- Be less tolerant of platforms that are not
Linus Torvalds1da177e2005-04-16 15:20:36 -0700124 strictly ACPI specification compliant.
125
126 See also Documentation/pm.txt, pci=noacpi
127
128 acpi_sleep= [HW,ACPI] Sleep options
129 Format: { s3_bios, s3_mode }
130 See Documentation/power/video.txt
Randy Dunlapa9913042005-10-23 12:57:11 -0700131
Linus Torvalds1da177e2005-04-16 15:20:36 -0700132 acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode
Randy Dunlapa9913042005-10-23 12:57:11 -0700133 Format: { level | edge | high | low }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700134
Randy Dunlapa9913042005-10-23 12:57:11 -0700135 acpi_irq_balance [HW,ACPI]
136 ACPI will balance active IRQs
137 default in APIC mode
Linus Torvalds1da177e2005-04-16 15:20:36 -0700138
Randy Dunlapa9913042005-10-23 12:57:11 -0700139 acpi_irq_nobalance [HW,ACPI]
140 ACPI will not move active IRQs (default)
141 default in PIC mode
Linus Torvalds1da177e2005-04-16 15:20:36 -0700142
Randy Dunlapa9913042005-10-23 12:57:11 -0700143 acpi_irq_pci= [HW,ACPI] If irq_balance, clear listed IRQs for
144 use by PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700145 Format: <irq>,<irq>...
146
Randy Dunlapa9913042005-10-23 12:57:11 -0700147 acpi_irq_isa= [HW,ACPI] If irq_balance, mark listed IRQs used by ISA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700148 Format: <irq>,<irq>...
149
Len Browna1f9e652006-01-25 23:47:36 -0500150 acpi_os_name= [HW,ACPI] Tell ACPI BIOS the name of the OS
151 Format: To spoof as Windows 98: ="Microsoft Windows"
152
Linus Torvalds1da177e2005-04-16 15:20:36 -0700153 acpi_osi= [HW,ACPI] empty param disables _OSI
154
155 acpi_serialize [HW,ACPI] force serialization of AML methods
156
157 acpi_skip_timer_override [HW,ACPI]
158 Recognize and ignore IRQ0/pin2 Interrupt Override.
159 For broken nForce2 BIOS resulting in XT-PIC timer.
160
161 acpi_dbg_layer= [HW,ACPI]
162 Format: <int>
Randy Dunlapa9913042005-10-23 12:57:11 -0700163 Each bit of the <int> indicates an ACPI debug layer,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700164 1: enable, 0: disable. It is useful for boot time
165 debugging. After system has booted up, it can be set
166 via /proc/acpi/debug_layer.
167
168 acpi_dbg_level= [HW,ACPI]
169 Format: <int>
Randy Dunlapa9913042005-10-23 12:57:11 -0700170 Each bit of the <int> indicates an ACPI debug level,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700171 1: enable, 0: disable. It is useful for boot time
172 debugging. After system has booted up, it can be set
173 via /proc/acpi/debug_level.
174
175 acpi_fake_ecdt [HW,ACPI] Workaround failure due to BIOS lacking ECDT
176
Luming Yu30e332f2005-08-12 00:31:00 -0400177 acpi_generic_hotkey [HW,ACPI]
178 Allow consolidated generic hotkey driver to
Randy Dunlapa9913042005-10-23 12:57:11 -0700179 override platform specific driver.
Luming Yu30e332f2005-08-12 00:31:00 -0400180 See also Documentation/acpi-hotkey.txt.
181
john stultz5d0cf412006-06-26 00:25:12 -0700182 acpi_pm_good [IA-32,X86-64]
183 Override the pmtimer bug detection: force the kernel
184 to assume that this machine's pmtimer latches its value
185 and always returns good values.
186
Chuck Ebbert66759a02005-09-12 18:49:25 +0200187 enable_timer_pin_1 [i386,x86-64]
188 Enable PIN 1 of APIC timer
Randy Dunlapa9913042005-10-23 12:57:11 -0700189 Can be useful to work around chipset bugs
190 (in particular on some ATI chipsets).
Chuck Ebbert66759a02005-09-12 18:49:25 +0200191 The kernel tries to set a reasonable default.
192
193 disable_timer_pin_1 [i386,x86-64]
194 Disable PIN 1 of APIC timer
195 Can be useful to work around chipset bugs.
196
Linus Torvalds1da177e2005-04-16 15:20:36 -0700197 ad1816= [HW,OSS]
198 Format: <io>,<irq>,<dma>,<dma2>
199 See also Documentation/sound/oss/AD1816.
200
201 ad1848= [HW,OSS]
202 Format: <io>,<irq>,<dma>,<dma2>,<type>
203
204 adlib= [HW,OSS]
205 Format: <io>
Randy Dunlapa9913042005-10-23 12:57:11 -0700206
Linus Torvalds1da177e2005-04-16 15:20:36 -0700207 advansys= [HW,SCSI]
208 See header of drivers/scsi/advansys.c.
209
210 advwdt= [HW,WDT] Advantech WDT
211 Format: <iostart>,<iostop>
212
213 aedsp16= [HW,OSS] Audio Excel DSP 16
214 Format: <io>,<irq>,<dma>,<mss_io>,<mpu_io>,<mpu_irq>
215 See also header of sound/oss/aedsp16.c.
Randy Dunlapa9913042005-10-23 12:57:11 -0700216
Linus Torvalds1da177e2005-04-16 15:20:36 -0700217 aha152x= [HW,SCSI]
218 See Documentation/scsi/aha152x.txt.
219
220 aha1542= [HW,SCSI]
221 Format: <portbase>[,<buson>,<busoff>[,<dmaspeed>]]
222
223 aic7xxx= [HW,SCSI]
224 See Documentation/scsi/aic7xxx.txt.
225
226 aic79xx= [HW,SCSI]
227 See Documentation/scsi/aic79xx.txt.
228
Linus Torvalds1da177e2005-04-16 15:20:36 -0700229 amijoy.map= [HW,JOY] Amiga joystick support
230 Map of devices attached to JOY0DAT and JOY1DAT
231 Format: <a>,<b>
232 See also Documentation/kernel/input/joystick.txt
233
234 analog.map= [HW,JOY] Analog joystick and gamepad support
235 Specifies type or capabilities of an analog joystick
236 connected to one of 16 gameports
237 Format: <type1>,<type2>,..<type16>
238
Randy Dunlapa9913042005-10-23 12:57:11 -0700239 apc= [HW,SPARC]
240 Power management functions (SPARCstation-4/5 + deriv.)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700241 Format: noidle
242 Disable APC CPU standby support. SPARCstation-Fox does
243 not play well with APC CPU idle - disable it if you have
244 APC and your system crashes randomly.
245
Randy Dunlapa9913042005-10-23 12:57:11 -0700246 apic= [APIC,i386] Change the output verbosity whilst booting
Linus Torvalds1da177e2005-04-16 15:20:36 -0700247 Format: { quiet (default) | verbose | debug }
248 Change the amount of debugging information output
249 when initialising the APIC and IO-APIC components.
Randy Dunlapa9913042005-10-23 12:57:11 -0700250
Linus Torvalds1da177e2005-04-16 15:20:36 -0700251 apm= [APM] Advanced Power Management
252 See header of arch/i386/kernel/apm.c.
253
254 applicom= [HW]
255 Format: <mem>,<irq>
Randy Dunlapa9913042005-10-23 12:57:11 -0700256
Linus Torvalds1da177e2005-04-16 15:20:36 -0700257 arcrimi= [HW,NET] ARCnet - "RIM I" (entirely mem-mapped) cards
258 Format: <io>,<irq>,<nodeID>
259
260 ataflop= [HW,M68k]
261
262 atarimouse= [HW,MOUSE] Atari Mouse
263
264 atascsi= [HW,SCSI] Atari SCSI
265
266 atkbd.extra= [HW] Enable extra LEDs and keys on IBM RapidAccess,
267 EzKey and similar keyboards
268
269 atkbd.reset= [HW] Reset keyboard during initialization
270
Randy Dunlapa9913042005-10-23 12:57:11 -0700271 atkbd.set= [HW] Select keyboard code set
272 Format: <int> (2 = AT (default), 3 = PS/2)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700273
274 atkbd.scroll= [HW] Enable scroll wheel on MS Office and similar
275 keyboards
276
277 atkbd.softraw= [HW] Choose between synthetic and real raw mode
278 Format: <bool> (0 = real, 1 = synthetic (default))
Randy Dunlapa9913042005-10-23 12:57:11 -0700279
280 atkbd.softrepeat= [HW]
281 Use software keyboard repeat
Linus Torvalds1da177e2005-04-16 15:20:36 -0700282
283 autotest [IA64]
284
285 awe= [HW,OSS] AWE32/SB32/AWE64 wave table synth
286 Format: <io>,<memsize>,<isapnp>
Randy Dunlapa9913042005-10-23 12:57:11 -0700287
Linus Torvalds1da177e2005-04-16 15:20:36 -0700288 aztcd= [HW,CD] Aztech CD268 CDROM driver
289 Format: <io>,0x79 (?)
290
291 baycom_epp= [HW,AX25]
292 Format: <io>,<mode>
Randy Dunlapa9913042005-10-23 12:57:11 -0700293
Linus Torvalds1da177e2005-04-16 15:20:36 -0700294 baycom_par= [HW,AX25] BayCom Parallel Port AX.25 Modem
295 Format: <io>,<mode>
296 See header of drivers/net/hamradio/baycom_par.c.
297
Randy Dunlapa9913042005-10-23 12:57:11 -0700298 baycom_ser_fdx= [HW,AX25]
299 BayCom Serial Port AX.25 Modem (Full Duplex Mode)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700300 Format: <io>,<irq>,<mode>[,<baud>]
301 See header of drivers/net/hamradio/baycom_ser_fdx.c.
302
Randy Dunlapa9913042005-10-23 12:57:11 -0700303 baycom_ser_hdx= [HW,AX25]
304 BayCom Serial Port AX.25 Modem (Half Duplex Mode)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700305 Format: <io>,<irq>,<mode>
306 See header of drivers/net/hamradio/baycom_ser_hdx.c.
307
308 blkmtd_device= [HW,MTD]
309 blkmtd_erasesz=
310 blkmtd_ro=
311 blkmtd_bs=
312 blkmtd_count=
313
314 bttv.card= [HW,V4L] bttv (bt848 + bt878 based grabber cards)
Randy Dunlapa9913042005-10-23 12:57:11 -0700315 bttv.radio= Most important insmod options are available as
316 kernel args too.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700317 bttv.pll= See Documentation/video4linux/bttv/Insmod-options
318 bttv.tuner= and Documentation/video4linux/bttv/CARDLIST
319
320 BusLogic= [HW,SCSI]
321 See drivers/scsi/BusLogic.c, comment before function
322 BusLogic_ParseDriverOptions().
323
324 c101= [NET] Moxa C101 synchronous serial card
325
326 cachesize= [BUGS=IA-32] Override level 2 CPU cache size detection.
327 Sometimes CPU hardware bugs make them report the cache
328 size incorrectly. The kernel will attempt work arounds
329 to fix known problems, but for some CPUs it is not
330 possible to determine what the correct size should be.
331 This option provides an override for these situations.
332
333 cdu31a= [HW,CD]
334 Format: <io>,<irq>[,PAS]
335 See header of drivers/cdrom/cdu31a.c.
336
337 chandev= [HW,NET] Generic channel device initialisation
338
339 checkreqprot [SELINUX] Set initial checkreqprot flag value.
340 Format: { "0" | "1" }
341 See security/selinux/Kconfig help text.
Randy Dunlapa9913042005-10-23 12:57:11 -0700342 0 -- check protection applied by kernel (includes
343 any implied execute protection).
Linus Torvalds1da177e2005-04-16 15:20:36 -0700344 1 -- check protection requested by application.
345 Default value is set via a kernel config option.
Randy Dunlapa9913042005-10-23 12:57:11 -0700346 Value can be changed at runtime via
347 /selinux/checkreqprot.
348
john stultz734efb42006-06-26 00:25:05 -0700349 clock= [BUGS=IA-32, HW] gettimeofday clocksource override.
350 [Deprecated]
351 Forces specified clocksource (if avaliable) to be used
352 when calculating gettimeofday(). If specified
353 clocksource is not avalible, it defaults to PIT.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700354 Format: { pit | tsc | cyclone | pmtmr }
355
Andi Kleenf9262c12006-03-08 17:57:25 -0800356 disable_8254_timer
357 enable_8254_timer
358 [IA32/X86_64] Disable/Enable interrupt 0 timer routing
359 over the 8254 in addition to over the IO-APIC. The
360 kernel tries to set a sensible default.
361
Linus Torvalds1da177e2005-04-16 15:20:36 -0700362 hpet= [IA-32,HPET] option to disable HPET and use PIT.
363 Format: disable
364
365 cm206= [HW,CD]
366 Format: { auto | [<io>,][<irq>] }
367
368 com20020= [HW,NET] ARCnet - COM20020 chipset
Randy Dunlapa9913042005-10-23 12:57:11 -0700369 Format:
370 <io>[,<irq>[,<nodeID>[,<backplane>[,<ckp>[,<timeout>]]]]]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700371
372 com90io= [HW,NET] ARCnet - COM90xx chipset (IO-mapped buffers)
373 Format: <io>[,<irq>]
374
Randy Dunlapa9913042005-10-23 12:57:11 -0700375 com90xx= [HW,NET]
376 ARCnet - COM90xx chipset (memory-mapped buffers)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700377 Format: <io>[,<irq>[,<memstart>]]
378
379 condev= [HW,S390] console device
380 conmode=
Randy Dunlapa9913042005-10-23 12:57:11 -0700381
Linus Torvalds1da177e2005-04-16 15:20:36 -0700382 console= [KNL] Output console device and options.
383
384 tty<n> Use the virtual console device <n>.
385
386 ttyS<n>[,options]
Randy Dunlapf1a1c2d2006-03-25 03:08:17 -0800387 ttyUSB0[,options]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700388 Use the specified serial port. The options are of
Randy Dunlapf1a1c2d2006-03-25 03:08:17 -0800389 the form "bbbbpnf", where "bbbb" is the baud rate,
390 "p" is parity ("n", "o", or "e"), "n" is number of
391 bits, and "f" is flow control ("r" for RTS or
392 omit it). Default is "9600n8".
Linus Torvalds1da177e2005-04-16 15:20:36 -0700393
Randy Dunlapf1a1c2d2006-03-25 03:08:17 -0800394 See Documentation/serial-console.txt for more
395 information. See
396 Documentation/networking/netconsole.txt for an
397 alternative.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700398
399 uart,io,<addr>[,options]
400 uart,mmio,<addr>[,options]
401 Start an early, polled-mode console on the 8250/16550
402 UART at the specified I/O port or MMIO address,
403 switching to the matching ttyS device later. The
404 options are the same as for ttyS, above.
405
406 cpcihp_generic= [HW,PCI] Generic port I/O CompactPCI driver
Randy Dunlapa9913042005-10-23 12:57:11 -0700407 Format:
408 <first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700409
410 cpia_pp= [HW,PPT]
411 Format: { parport<nr> | auto | none }
412
Eric W. Biedermandc009d92005-06-25 14:57:52 -0700413 crashkernel=nn[KMG]@ss[KMG]
414 [KNL] Reserve a chunk of physical memory to
415 hold a kernel to switch to with kexec on panic.
416
Linus Torvalds1da177e2005-04-16 15:20:36 -0700417 cs4232= [HW,OSS]
418 Format: <io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>
419
420 cs89x0_dma= [HW,NET]
421 Format: <dma>
422
423 cs89x0_media= [HW,NET]
424 Format: { rj45 | aui | bnc }
Randy Dunlapa9913042005-10-23 12:57:11 -0700425
Linus Torvalds1da177e2005-04-16 15:20:36 -0700426 cyclades= [HW,SERIAL] Cyclades multi-serial port adapter.
Randy Dunlapa9913042005-10-23 12:57:11 -0700427
428 dasd= [HW,NET]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700429 See header of drivers/s390/block/dasd_devmap.c.
430
431 db9.dev[2|3]= [HW,JOY] Multisystem joystick support via parallel port
432 (one device per port)
433 Format: <port#>,<type>
434 See also Documentation/input/joystick-parport.txt
435
436 debug [KNL] Enable kernel debugging (events log level).
437
Ingo Molnarcae2ed92006-07-03 00:24:48 -0700438 debug_locks_verbose=
439 [KNL] verbose self-tests
440 Format=<0|1>
441 Print debugging info while doing the locking API
442 self-tests.
443 We default to 0 (no extra messages), setting it to
444 1 will print _a lot_ more information - normally
445 only useful to kernel developers.
446
Linus Torvalds1da177e2005-04-16 15:20:36 -0700447 decnet= [HW,NET]
448 Format: <area>[,<node>]
449 See also Documentation/networking/decnet.txt.
450
Linus Torvalds1da177e2005-04-16 15:20:36 -0700451 dhash_entries= [KNL]
452 Set number of hash buckets for dentry cache.
Randy Dunlapa9913042005-10-23 12:57:11 -0700453
Linus Torvalds1da177e2005-04-16 15:20:36 -0700454 digi= [HW,SERIAL]
455 IO parameters + enable/disable command.
456
457 digiepca= [HW,SERIAL]
458 See drivers/char/README.epca and
459 Documentation/digiepca.txt.
460
461 dmascc= [HW,AX25,SERIAL] AX.25 Z80SCC driver with DMA
462 support available.
463 Format: <io_dev0>[,<io_dev1>[,..<io_dev32>]]
464
465 dmasound= [HW,OSS] Sound subsystem buffers
466
467 dscc4.setup= [NET]
468
469 dtc3181e= [HW,SCSI]
470
Randy Dunlapa9913042005-10-23 12:57:11 -0700471 earlyprintk= [IA-32,X86-64]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700472 earlyprintk=vga
473 earlyprintk=serial[,ttySn[,baudrate]]
474
Randy Dunlapa9913042005-10-23 12:57:11 -0700475 Append ",keep" to not disable it when the real console
Linus Torvalds1da177e2005-04-16 15:20:36 -0700476 takes over.
477
478 Only vga or serial at a time, not both.
479
480 Currently only ttyS0 and ttyS1 are supported.
481
482 Interaction with the standard serial driver is not
483 very good.
484
485 The VGA output is eventually overwritten by the real
486 console.
487
488 eata= [HW,SCSI]
489
Len Brown53f11d42005-12-05 16:46:36 -0500490 ec_intr= [HW,ACPI] ACPI Embedded Controller interrupt mode
491 Format: <int>
492 0: polling mode
493 non-0: interrupt mode (default)
494
Linus Torvalds1da177e2005-04-16 15:20:36 -0700495 eda= [HW,PS2]
496
497 edb= [HW,PS2]
498
499 edd= [EDD]
500 Format: {"of[f]" | "sk[ipmbr]"}
501 See comment in arch/i386/boot/edd.S
502
Randy Dunlapa9913042005-10-23 12:57:11 -0700503 eicon= [HW,ISDN]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700504 Format: <id>,<membase>,<irq>
505
506 eisa_irq_edge= [PARISC,HW]
507 See header of drivers/parisc/eisa.c.
508
509 elanfreq= [IA-32]
510 See comment before function elanfreq_setup() in
511 arch/i386/kernel/cpu/cpufreq/elanfreq.c.
512
513 elevator= [IOSCHED]
Randy Dunlap16ab3ad2006-01-14 13:21:20 -0800514 Format: {"anticipatory" | "cfq" | "deadline" | "noop"}
Randy Dunlapa9913042005-10-23 12:57:11 -0700515 See Documentation/block/as-iosched.txt and
516 Documentation/block/deadline-iosched.txt for details.
517
Vivek Goyalaac04b32006-01-09 20:51:47 -0800518 elfcorehdr= [IA-32, X86_64]
Randy Dunlapa9913042005-10-23 12:57:11 -0700519 Specifies physical address of start of kernel core
Vivek Goyalaac04b32006-01-09 20:51:47 -0800520 image elf header. Generally kexec loader will
521 pass this option to capture kernel.
522 See Documentation/kdump/kdump.txt for details.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700523
524 enforcing [SELINUX] Set initial enforcing status.
525 Format: {"0" | "1"}
526 See security/selinux/Kconfig help text.
527 0 -- permissive (log only, no denials).
528 1 -- enforcing (deny and log).
529 Default value is 0.
530 Value can be changed at runtime via /selinux/enforce.
531
532 es1370= [HW,OSS]
533 Format: <lineout>[,<micbias>]
534 See also header of sound/oss/es1370.c.
535
536 es1371= [HW,OSS]
537 Format: <spdif>,[<nomix>,[<amplifier>]]
538 See also header of sound/oss/es1371.c.
Randy Dunlapa9913042005-10-23 12:57:11 -0700539
Linus Torvalds1da177e2005-04-16 15:20:36 -0700540 ether= [HW,NET] Ethernet cards parameters
541 This option is obsoleted by the "netdev=" option, which
542 has equivalent usage. See its documentation for details.
543
544 eurwdt= [HW,WDT] Eurotech CPU-1220/1410 onboard watchdog.
545 Format: <io>[,<irq>]
546
547 fd_mcs= [HW,SCSI]
548 See header of drivers/scsi/fd_mcs.c.
549
550 fdomain= [HW,SCSI]
551 See header of drivers/scsi/fdomain.c.
552
553 floppy= [HW]
554 See Documentation/floppy.txt.
555
556 ftape= [HW] Floppy Tape subsystem debugging options.
557 See Documentation/ftape.txt.
558
559 gamecon.map[2|3]=
560 [HW,JOY] Multisystem joystick and NES/SNES/PSX pad
561 support via parallel port (up to 5 devices per port)
562 Format: <port#>,<pad1>,<pad2>,<pad3>,<pad4>,<pad5>
563 See also Documentation/input/joystick-parport.txt
564
565 gamma= [HW,DRM]
566
567 gdth= [HW,SCSI]
568 See header of drivers/scsi/gdth.c.
569
570 gpt [EFI] Forces disk with valid GPT signature but
571 invalid Protective MBR to be treated as GPT.
572
573 gscd= [HW,CD]
574 Format: <io>
575
576 gt96100eth= [NET] MIPS GT96100 Advanced Communication Controller
577
578 gus= [HW,OSS]
579 Format: <io>,<irq>,<dma>,<dma16>
Randy Dunlapa9913042005-10-23 12:57:11 -0700580
Linus Torvalds1da177e2005-04-16 15:20:36 -0700581 gvp11= [HW,SCSI]
582
583 hashdist= [KNL,NUMA] Large hashes allocated during boot
584 are distributed across NUMA nodes. Defaults on
585 for IA-64, off otherwise.
Randy Dunlapa9913042005-10-23 12:57:11 -0700586 Format: 0 | 1 (for off | on)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700587
588 hcl= [IA-64] SGI's Hardware Graph compatibility layer
589
590 hd= [EIDE] (E)IDE hard drive subsystem geometry
591 Format: <cyl>,<head>,<sect>
592
593 hd?= [HW] (E)IDE subsystem
594 hd?lun= See Documentation/ide.txt.
595
596 highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact
597 size of <nn>. This works even on boxes that have no
598 highmem otherwise. This also works to reduce highmem
599 size on bigger boxes.
600
601 hisax= [HW,ISDN]
602 See Documentation/isdn/README.HiSax.
603
604 hugepages= [HW,IA-32,IA-64] Maximal number of HugeTLB pages.
605
606 noirqbalance [IA-32,SMP,KNL] Disable kernel irq balancing
607
608 i8042.direct [HW] Put keyboard port into non-translated mode
609 i8042.dumbkbd [HW] Pretend that controlled can only read data from
610 keyboard and can not control its state
611 (Don't attempt to blink the leds)
612 i8042.noaux [HW] Don't check for auxiliary (== mouse) port
Dmitry Torokhov945ef0d2005-09-04 01:42:00 -0500613 i8042.nokbd [HW] Don't check/create keyboard port
Linus Torvalds1da177e2005-04-16 15:20:36 -0700614 i8042.nomux [HW] Don't check presence of an active multiplexing
615 controller
616 i8042.nopnp [HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
617 controllers
618 i8042.panicblink=
619 [HW] Frequency with which keyboard LEDs should blink
620 when kernel panics (default is 0.5 sec)
621 i8042.reset [HW] Reset the controller during init and cleanup
622 i8042.unlock [HW] Unlock (ignore) the keylock
623
624 i810= [HW,DRM]
625
Dmitry Torokhove70c9d52005-06-25 14:54:25 -0700626 i8k.ignore_dmi [HW] Continue probing hardware even if DMI data
627 indicates that the driver is running on unsupported
628 hardware.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700629 i8k.force [HW] Activate i8k driver even if SMM BIOS signature
630 does not match list of supported models.
631 i8k.power_status
632 [HW] Report power status in /proc/i8k
633 (disabled by default)
634 i8k.restricted [HW] Allow controlling fans only if SYS_ADMIN
635 capability is set.
636
637 ibmmcascsi= [HW,MCA,SCSI] IBM MicroChannel SCSI adapter
638 See Documentation/mca.txt.
639
640 icn= [HW,ISDN]
641 Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
642
643 ide= [HW] (E)IDE subsystem
644 Format: ide=nodma or ide=doubler or ide=reverse
645 See Documentation/ide.txt.
646
647 ide?= [HW] (E)IDE subsystem
648 Format: ide?=noprobe or chipset specific parameters.
649 See Documentation/ide.txt.
Randy Dunlapa9913042005-10-23 12:57:11 -0700650
Linus Torvalds1da177e2005-04-16 15:20:36 -0700651 idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed
652 See Documentation/ide.txt.
653
654 idle= [HW]
655 Format: idle=poll or idle=halt
Randy Dunlapa9913042005-10-23 12:57:11 -0700656
Linus Torvalds1da177e2005-04-16 15:20:36 -0700657 ihash_entries= [KNL]
658 Set number of hash buckets for inode cache.
659
660 in2000= [HW,SCSI]
661 See header of drivers/scsi/in2000.c.
662
663 init= [KNL]
664 Format: <full_path>
665 Run specified binary instead of /sbin/init as init
666 process.
667
668 initcall_debug [KNL] Trace initcalls as they are executed. Useful
669 for working out where the kernel is dying during
670 startup.
671
672 initrd= [BOOT] Specify the location of the initial ramdisk
673
674 inport.irq= [HW] Inport (ATI XL and Microsoft) busmouse driver
675 Format: <irq>
676
Jesse Barnes2bd0fa32005-12-13 03:05:03 -0500677 combined_mode= [HW] control which driver uses IDE ports in combined
678 mode: legacy IDE driver, libata, or both
679 (in the libata case, libata.atapi_enabled=1 may be
680 useful as well). Note that using the ide or libata
681 options may affect your device naming (e.g. by
682 changing hdc to sdb).
683 Format: combined (default), ide, or libata
684
Linus Torvalds1da177e2005-04-16 15:20:36 -0700685 inttest= [IA64]
686
687 io7= [HW] IO7 for Marvel based alpha systems
688 See comment before marvel_specify_io7 in
689 arch/alpha/kernel/core_marvel.c.
690
691 ip= [IP_PNP]
692 See Documentation/nfsroot.txt.
693
694 ip2= [HW] Set IO/IRQ pairs for up to 4 IntelliPort boards
695 See comment before ip2_setup() in drivers/char/ip2.c.
696
697 ips= [HW,SCSI] Adaptec / IBM ServeRAID controller
698 See header of drivers/scsi/ips.c.
699
Simon Horman72c4a132006-09-13 19:57:18 -0700700 ports= [IP_VS_FTP] IPVS ftp helper module
701 Default is 21.
702 Up to 8 (IP_VS_APP_MAX_PORTS) ports
703 may be specified.
704 Format: <port>,<port>....
705
Alan Cox200803d2005-06-28 20:45:18 -0700706 irqfixup [HW]
707 When an interrupt is not handled search all handlers
708 for it. Intended to get systems with badly broken
709 firmware running.
710
711 irqpoll [HW]
712 When an interrupt is not handled search all handlers
713 for it. Also check all handlers each timer
714 interrupt. Intended to get systems with badly broken
715 firmware running.
716
Linus Torvalds1da177e2005-04-16 15:20:36 -0700717 isapnp= [ISAPNP]
Randy Dunlapa9913042005-10-23 12:57:11 -0700718 Format: <RDP>,<reset>,<pci_scan>,<verbosity>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700719
720 isolcpus= [KNL,SMP] Isolate CPUs from the general scheduler.
721 Format: <cpu number>,...,<cpu number>
722 This option can be used to specify one or more CPUs
723 to isolate from the general SMP balancing and scheduling
724 algorithms. The only way to move a process onto or off
725 an "isolated" CPU is via the CPU affinity syscalls.
726 <cpu number> begins at 0 and the maximum value is
727 "number of CPUs in system - 1".
728
729 This option is the preferred way to isolate CPUs. The
Randy Dunlapa9913042005-10-23 12:57:11 -0700730 alternative -- manually setting the CPU mask of all
731 tasks in the system -- can cause problems and
732 suboptimal load balancer performance.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700733
734 isp16= [HW,CD]
735 Format: <io>,<irq>,<dma>,<setup>
736
Randy Dunlapa9913042005-10-23 12:57:11 -0700737 iucv= [HW,NET]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700738
739 js= [HW,JOY] Analog joystick
740 See Documentation/input/joystick.txt.
741
742 keepinitrd [HW,ARM]
743
Randy Dunlapa9913042005-10-23 12:57:11 -0700744 kstack=N [IA-32,X86-64] Print N words from the kernel stack
Linus Torvalds1da177e2005-04-16 15:20:36 -0700745 in oops dumps.
746
747 l2cr= [PPC]
748
Randy Dunlapa9913042005-10-23 12:57:11 -0700749 lapic [IA-32,APIC] Enable the local APIC even if BIOS
750 disabled it.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700751
752 lasi= [HW,SCSI] PARISC LASI driver for the 53c700 chip
753 Format: addr:<io>,irq:<irq>
754
Randy Dunlapa9913042005-10-23 12:57:11 -0700755 llsc*= [IA64] See function print_params() in
756 arch/ia64/sn/kernel/llsc4.c.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700757
758 load_ramdisk= [RAM] List of ramdisks to load from floppy
759 See Documentation/ramdisk.txt.
760
Randy Dunlapa6b25b62006-01-14 13:21:19 -0800761 lockd.nlm_grace_period=P [NFS] Assign grace period.
762 Format: <integer>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700763
Randy Dunlapa6b25b62006-01-14 13:21:19 -0800764 lockd.nlm_tcpport=N [NFS] Assign TCP port.
765 Format: <integer>
766
767 lockd.nlm_timeout=T [NFS] Assign timeout value.
768 Format: <integer>
769
770 lockd.nlm_udpport=M [NFS] Assign UDP port.
771 Format: <integer>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700772
773 logibm.irq= [HW,MOUSE] Logitech Bus Mouse Driver
774 Format: <irq>
775
776 loglevel= All Kernel Messages with a loglevel smaller than the
777 console loglevel will be printed to the console. It can
778 also be changed with klogd or other programs. The
779 loglevels are defined as follows:
780
781 0 (KERN_EMERG) system is unusable
782 1 (KERN_ALERT) action must be taken immediately
783 2 (KERN_CRIT) critical conditions
784 3 (KERN_ERR) error conditions
785 4 (KERN_WARNING) warning conditions
786 5 (KERN_NOTICE) normal but significant condition
787 6 (KERN_INFO) informational
788 7 (KERN_DEBUG) debug-level messages
789
790 log_buf_len=n Sets the size of the printk ring buffer, in bytes.
Randy Dunlapa9913042005-10-23 12:57:11 -0700791 Format: { n | nk | nM }
792 n must be a power of two. The default size
793 is set in the kernel config file.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700794
795 lp=0 [LP] Specify parallel ports to use, e.g,
796 lp=port[,port...] lp=none,parport0 (lp0 not configured, lp1 uses
797 lp=reset first parallel port). 'lp=0' disables the
798 lp=auto printer driver. 'lp=reset' (which can be
799 specified in addition to the ports) causes
800 attached printers to be reset. Using
801 lp=port1,port2,... specifies the parallel ports
802 to associate lp devices with, starting with
803 lp0. A port specification may be 'none' to skip
804 that lp device, or a parport name such as
805 'parport0'. Specifying 'lp=auto' instead of a
806 port specification list means that device IDs
807 from each port should be examined, to see if
808 an IEEE 1284-compliant printer is attached; if
809 so, the driver will manage that printer.
810 See also header of drivers/char/lp.c.
811
812 lpj=n [KNL]
813 Sets loops_per_jiffy to given constant, thus avoiding
814 time-consuming boot-time autodetection (up to 250 ms per
815 CPU). 0 enables autodetection (default). To determine
816 the correct value for your kernel, boot with normal
817 autodetection and see what value is printed. Note that
818 on SMP systems the preset will be applied to all CPUs,
819 which is likely to cause problems if your CPUs need
820 significantly divergent settings. An incorrect value
821 will cause delays in the kernel to be wrong, leading to
822 unpredictable I/O errors and other breakage. Although
823 unlikely, in the extreme case this might damage your
824 hardware.
825
826 ltpc= [NET]
827 Format: <io>,<irq>,<dma>
828
Randy Dunlapa9913042005-10-23 12:57:11 -0700829 mac5380= [HW,SCSI] Format:
830 <can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700831
Randy Dunlapa9913042005-10-23 12:57:11 -0700832 mac53c9x= [HW,SCSI] Format:
833 <num_esps>,<disconnect>,<nosync>,<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700834
Randy Dunlapa9913042005-10-23 12:57:11 -0700835 machvec= [IA64] Force the use of a particular machine-vector
836 (machvec) in a generic kernel.
837 Example: machvec=hpzx1_swiotlb
Linus Torvalds1da177e2005-04-16 15:20:36 -0700838
Randy Dunlapa9913042005-10-23 12:57:11 -0700839 mad16= [HW,OSS] Format:
840 <io>,<irq>,<dma>,<dma16>,<mpu_io>,<mpu_irq>,<joystick>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700841
842 maui= [HW,OSS]
843 Format: <io>,<irq>
Randy Dunlapa9913042005-10-23 12:57:11 -0700844
845 max_loop= [LOOP] Maximum number of loopback devices that can
Linus Torvalds1da177e2005-04-16 15:20:36 -0700846 be mounted
847 Format: <1-256>
848
849 maxcpus= [SMP] Maximum number of processors that an SMP kernel
850 should make use of
851
Bob Picco2b2c3752005-06-29 18:00:00 -0700852 max_addr=[KMG] [KNL,BOOT,ia64] All physical memory greater than or
853 equal to this physical address is ignored.
854
Randy Dunlapa9913042005-10-23 12:57:11 -0700855 max_luns= [SCSI] Maximum number of LUNs to probe.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700856 Should be between 1 and 2^32-1.
857
858 max_report_luns=
Randy Dunlapa9913042005-10-23 12:57:11 -0700859 [SCSI] Maximum number of LUNs received.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700860 Should be between 1 and 16384.
861
862 mca-pentium [BUGS=IA-32]
863
864 mcatest= [IA-64]
865
866 mcd= [HW,CD]
867 Format: <port>,<irq>,<mitsumi_bug_93_wait>
868
869 mcdx= [HW,CD]
870
871 mce [IA-32] Machine Check Exception
872
873 md= [HW] RAID subsystems devices and level
874 See Documentation/md.txt.
Randy Dunlapa9913042005-10-23 12:57:11 -0700875
Linus Torvalds1da177e2005-04-16 15:20:36 -0700876 mdacon= [MDA]
877 Format: <first>,<last>
878 Specifies range of consoles to be captured by the MDA.
Randy Dunlapa9913042005-10-23 12:57:11 -0700879
Linus Torvalds1da177e2005-04-16 15:20:36 -0700880 mem=nn[KMG] [KNL,BOOT] Force usage of a specific amount of memory
881 Amount of memory to be used when the kernel is not able
882 to see the whole system memory or for test.
883 [IA-32] Use together with memmap= to avoid physical
884 address space collisions. Without memmap= PCI devices
885 could be placed at addresses belonging to unused RAM.
886
887 mem=nopentium [BUGS=IA-32] Disable usage of 4MB pages for kernel
888 memory.
889
akpm@osdl.org69cda7b2006-01-09 20:51:46 -0800890 memmap=exactmap [KNL,IA-32,X86_64] Enable setting of an exact
Linus Torvalds1da177e2005-04-16 15:20:36 -0700891 E820 memory map, as specified by the user.
892 Such memmap=exactmap lines can be constructed based on
893 BIOS output or other requirements. See the memmap=nn@ss
894 option description.
895
896 memmap=nn[KMG]@ss[KMG]
897 [KNL] Force usage of a specific region of memory
898 Region of memory to be used, from ss to ss+nn.
899
900 memmap=nn[KMG]#ss[KMG]
901 [KNL,ACPI] Mark specific memory as ACPI data.
902 Region of memory to be used, from ss to ss+nn.
903
904 memmap=nn[KMG]$ss[KMG]
905 [KNL,ACPI] Mark specific memory as reserved.
906 Region of memory to be used, from ss to ss+nn.
907
908 meye.*= [HW] Set MotionEye Camera parameters
909 See Documentation/video4linux/meye.txt.
910
911 mga= [HW,DRM]
912
akpm@osdl.org198e2f12006-01-12 01:05:30 -0800913 migration_cost=
914 [KNL,SMP] debug: override scheduler migration costs
915 Format: <level-1-usecs>,<level-2-usecs>,...
916 This debugging option can be used to override the
917 default scheduler migration cost matrix. The numbers
918 are indexed by 'CPU domain distance'.
919 E.g. migration_cost=1000,2000,3000 on an SMT NUMA
920 box will set up an intra-core migration cost of
921 1 msec, an inter-core migration cost of 2 msecs,
922 and an inter-node migration cost of 3 msecs.
923
924 WARNING: using the wrong values here can break
925 scheduler performance, so it's only for scheduler
926 development purposes, not production environments.
927
928 migration_debug=
929 [KNL,SMP] migration cost auto-detect verbosity
930 Format=<0|1|2>
931 If a system's migration matrix reported at bootup
932 seems erroneous then this option can be used to
933 increase verbosity of the detection process.
934 We default to 0 (no extra messages), 1 will print
935 some more information, and 2 will be really
936 verbose (probably only useful if you also have a
937 serial console attached to the system).
938
939 migration_factor=
940 [KNL,SMP] multiply/divide migration costs by a factor
941 Format=<percent>
942 This debug option can be used to proportionally
943 increase or decrease the auto-detected migration
944 costs for all entries of the migration matrix.
945 E.g. migration_factor=150 will increase migration
946 costs by 50%. (and thus the scheduler will be less
947 eager migrating cache-hot tasks)
948 migration_factor=80 will decrease migration costs
949 by 20%. (thus the scheduler will be more eager to
950 migrate tasks)
951
952 WARNING: using the wrong values here can break
953 scheduler performance, so it's only for scheduler
954 development purposes, not production environments.
955
Linus Torvalds1da177e2005-04-16 15:20:36 -0700956 mousedev.tap_time=
957 [MOUSE] Maximum time between finger touching and
958 leaving touchpad surface for touch to be considered
959 a tap and be reported as a left button click (for
960 touchpads working in absolute mode only).
961 Format: <msecs>
962 mousedev.xres= [MOUSE] Horizontal screen resolution, used for devices
963 reporting absolute coordinates, such as tablets
964 mousedev.yres= [MOUSE] Vertical screen resolution, used for devices
965 reporting absolute coordinates, such as tablets
966
967 mpu401= [HW,OSS]
968 Format: <io>,<irq>
969
970 MTD_Partition= [MTD]
971 Format: <name>,<region-number>,<size>,<offset>
972
Randy Dunlapa9913042005-10-23 12:57:11 -0700973 MTD_Region= [MTD] Format:
974 <name>,<region-number>[,<base>,<size>,<buswidth>,<altbuswidth>]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700975
976 mtdparts= [MTD]
977 See drivers/mtd/cmdline.c.
978
979 mtouchusb.raw_coordinates=
Randy Dunlapa9913042005-10-23 12:57:11 -0700980 [HW] Make the MicroTouch USB driver use raw coordinates
981 ('y', default) or cooked coordinates ('n')
Linus Torvalds1da177e2005-04-16 15:20:36 -0700982
983 n2= [NET] SDL Inc. RISCom/N2 synchronous serial card
984
985 NCR_D700= [HW,SCSI]
986 See header of drivers/scsi/NCR_D700.c.
987
988 ncr5380= [HW,SCSI]
989
990 ncr53c400= [HW,SCSI]
991
992 ncr53c400a= [HW,SCSI]
993
994 ncr53c406a= [HW,SCSI]
995
996 ncr53c8xx= [HW,SCSI]
997
998 netdev= [NET] Network devices parameters
999 Format: <irq>,<io>,<mem_start>,<mem_end>,<name>
1000 Note that mem_start is often overloaded to mean
1001 something different and driver-specific.
Randy Dunlapa9913042005-10-23 12:57:11 -07001002 This usage is only documented in each driver source
1003 file if at all.
1004
Linus Torvalds1da177e2005-04-16 15:20:36 -07001005 nfsaddrs= [NFS]
1006 See Documentation/nfsroot.txt.
1007
1008 nfsroot= [NFS] nfs root filesystem for disk-less boxes.
1009 See Documentation/nfsroot.txt.
1010
Trond Myklebusta72b4422006-01-03 09:55:41 +01001011 nfs.callback_tcpport=
1012 [NFS] set the TCP port on which the NFSv4 callback
1013 channel should listen.
1014
Trond Myklebust58df0952006-01-03 09:55:57 +01001015 nfs.idmap_cache_timeout=
1016 [NFS] set the maximum lifetime for idmapper cache
1017 entries.
1018
Linus Torvalds1da177e2005-04-16 15:20:36 -07001019 nmi_watchdog= [KNL,BUGS=IA-32] Debugging features for SMP kernels
1020
1021 no387 [BUGS=IA-32] Tells the kernel to use the 387 maths
1022 emulation library even if a 387 maths coprocessor
1023 is present.
1024
Randy Dunlapa9913042005-10-23 12:57:11 -07001025 noalign [KNL,ARM]
1026
Linus Torvalds1da177e2005-04-16 15:20:36 -07001027 noapic [SMP,APIC] Tells the kernel to not make use of any
1028 IOAPICs that may be present in the system.
1029
1030 noasync [HW,M68K] Disables async and sync negotiation for
1031 all devices.
1032
1033 nobats [PPC] Do not use BATs for mapping kernel lowmem
1034 on "Classic" PPC cores.
1035
1036 nocache [ARM]
Randy Dunlapa9913042005-10-23 12:57:11 -07001037
Shailabh Nagar163ecdf2006-07-30 03:03:11 -07001038 nodelayacct [KNL] Disable per-task delay accounting
1039
Linus Torvalds1da177e2005-04-16 15:20:36 -07001040 nodisconnect [HW,SCSI,M68K] Disables SCSI disconnects.
1041
1042 noexec [IA-64]
1043
Randy Dunlapa9913042005-10-23 12:57:11 -07001044 noexec [IA-32,X86-64]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001045 noexec=on: enable non-executable mappings (default)
1046 noexec=off: disable nn-executable mappings
1047
Chuck Ebbert4f886512006-03-23 02:59:34 -08001048 nofxsr [BUGS=IA-32] Disables x86 floating point extended
1049 register save and restore. The kernel will only save
1050 legacy floating-point registers on task switch.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001051
1052 nohlt [BUGS=ARM]
Randy Dunlapa9913042005-10-23 12:57:11 -07001053
Linus Torvalds1da177e2005-04-16 15:20:36 -07001054 no-hlt [BUGS=IA-32] Tells the kernel that the hlt
1055 instruction doesn't work correctly and not to
1056 use it.
1057
1058 nohalt [IA-64] Tells the kernel not to use the power saving
1059 function PAL_HALT_LIGHT when idle. This increases
1060 power-consumption. On the positive side, it reduces
1061 interrupt wake-up latency, which may improve performance
1062 in certain environments such as networked servers or
1063 real-time systems.
1064
1065 noirqdebug [IA-32] Disables the code which attempts to detect and
1066 disable unhandled interrupt sources.
1067
1068 noisapnp [ISAPNP] Disables ISA PnP code.
1069
1070 noinitrd [RAM] Tells the kernel not to load any configured
1071 initial RAM disk.
1072
1073 nointroute [IA-64]
1074
1075 nolapic [IA-32,APIC] Do not enable or use the local APIC.
1076
1077 noltlbs [PPC] Do not use large page/tlb entries for kernel
1078 lowmem mapping on PPC40x.
1079
Horms312f1f02006-02-22 09:57:55 +09001080 nomca [IA-64] Disable machine check abort handling
1081
Hormsabe37e52006-04-01 01:36:09 +02001082 nomce [IA-32] Machine Check Exception
1083
Linus Torvalds1da177e2005-04-16 15:20:36 -07001084 noresidual [PPC] Don't use residual data on PReP machines.
1085
Randy Dunlapa9913042005-10-23 12:57:11 -07001086 noresume [SWSUSP] Disables resume and restores original swap
1087 space.
1088
Linus Torvalds1da177e2005-04-16 15:20:36 -07001089 no-scroll [VGA] Disables scrollback.
1090 This is required for the Braillex ib80-piezo Braille
1091 reader made by F.H. Papenmeier (Germany).
1092
1093 nosbagart [IA-64]
1094
Chuck Ebbert4f886512006-03-23 02:59:34 -08001095 nosep [BUGS=IA-32] Disables x86 SYSENTER/SYSEXIT support.
1096
Linus Torvalds1da177e2005-04-16 15:20:36 -07001097 nosmp [SMP] Tells an SMP kernel to act as a UP kernel.
1098
1099 nosync [HW,M68K] Disables sync negotiation for all devices.
1100
1101 notsc [BUGS=IA-32] Disable Time Stamp Counter
1102
1103 nousb [USB] Disable the USB subsystem
1104
1105 nowb [ARM]
Randy Dunlapa9913042005-10-23 12:57:11 -07001106
Dave Jonesa61c2d72006-01-07 23:18:19 +00001107 nr_uarts= [SERIAL] maximum number of UARTs to be registered.
1108
Linus Torvalds1da177e2005-04-16 15:20:36 -07001109 opl3= [HW,OSS]
1110 Format: <io>
1111
1112 opl3sa= [HW,OSS]
1113 Format: <io>,<irq>,<dma>,<dma2>,<mpu_io>,<mpu_irq>
1114
Randy Dunlapa9913042005-10-23 12:57:11 -07001115 opl3sa2= [HW,OSS] Format:
1116 <io>,<irq>,<dma>,<dma2>,<mss_io>,<mpu_io>,<ymode>,<loopback>[,<isapnp>,<multiple]
1117
Linus Torvalds1da177e2005-04-16 15:20:36 -07001118 oprofile.timer= [HW]
1119 Use timer interrupt instead of performance counters
1120
1121 optcd= [HW,CD]
1122 Format: <io>
1123
1124 osst= [HW,SCSI] SCSI Tape Driver
1125 Format: <buffer_size>,<write_threshold>
1126 See also Documentation/scsi/st.txt.
1127
1128 panic= [KNL] Kernel behaviour on panic
1129 Format: <timeout>
1130
1131 parkbd.port= [HW] Parallel port number the keyboard adapter is
1132 connected to, default is 0.
1133 Format: <parport#>
1134 parkbd.mode= [HW] Parallel port keyboard adapter mode of operation,
1135 0 for XT, 1 for AT (default is AT).
Randy Dunlapa9913042005-10-23 12:57:11 -07001136 Format: <mode>
Linus Torvalds1da177e2005-04-16 15:20:36 -07001137
Randy Dunlapa9913042005-10-23 12:57:11 -07001138 parport= [HW,PPT] Specify parallel ports. 0 disables.
1139 Format: { 0 | auto | 0xBBB[,IRQ[,DMA]] }
1140 Use 'auto' to force the driver to use any
1141 IRQ/DMA settings detected (the default is to
1142 ignore detected IRQ/DMA settings because of
1143 possible conflicts). You can specify the base
1144 address, IRQ, and DMA settings; IRQ and DMA
1145 should be numbers, or 'auto' (for using detected
1146 settings on that particular port), or 'nofifo'
1147 (to avoid using a FIFO even if it is detected).
1148 Parallel ports are assigned in the order they
1149 are specified on the command line, starting
1150 with parport0.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001151
Randy Dunlapa9913042005-10-23 12:57:11 -07001152 parport_init_mode= [HW,PPT]
1153 Configure VIA parallel port to operate in
1154 a specific mode. This is necessary on Pegasos
1155 computer where firmware has no options for setting
1156 up parallel port mode and sets it to spp.
1157 Currently this function knows 686a and 8231 chips.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001158 Format: [spp|ps2|epp|ecp|ecpepp]
1159
Randy Dunlapa9913042005-10-23 12:57:11 -07001160 pas2= [HW,OSS] Format:
1161 <io>,<irq>,<dma>,<dma16>,<sb_io>,<sb_irq>,<sb_dma>,<sb_dma16>
1162
Linus Torvalds1da177e2005-04-16 15:20:36 -07001163 pas16= [HW,SCSI]
1164 See header of drivers/scsi/pas16.c.
1165
Andrew Mortondd287792006-03-23 03:00:57 -08001166 pause_on_oops=
1167 Halt all CPUs after the first oops has been printed for
1168 the specified number of seconds. This is to be used if
1169 your oopses keep scrolling off the screen.
1170
Linus Torvalds1da177e2005-04-16 15:20:36 -07001171 pcbit= [HW,ISDN]
1172
1173 pcd. [PARIDE]
1174 See header of drivers/block/paride/pcd.c.
1175 See also Documentation/paride.txt.
1176
Randy Dunlapa9913042005-10-23 12:57:11 -07001177 pci=option[,option...] [PCI] various PCI subsystem options:
1178 off [IA-32] don't probe for the PCI bus
1179 bios [IA-32] force use of PCI BIOS, don't access
1180 the hardware directly. Use this if your machine
1181 has a non-standard PCI host bridge.
1182 nobios [IA-32] disallow use of PCI BIOS, only direct
1183 hardware access methods are allowed. Use this
1184 if you experience crashes upon bootup and you
1185 suspect they are caused by the BIOS.
1186 conf1 [IA-32] Force use of PCI Configuration
1187 Mechanism 1.
1188 conf2 [IA-32] Force use of PCI Configuration
1189 Mechanism 2.
Bjorn Helgaas61be6d62006-02-15 15:17:43 -08001190 nommconf [IA-32,X86_64] Disable use of MMCONFIG for PCI
1191 Configuration
Andi Kleen40dd2d22006-08-30 19:37:15 +02001192 mmconf [IA-32,X86_64] Force MMCONFIG. This is useful
1193 to override the builtin blacklist.
Matthew Wilcox309e57d2006-03-05 22:33:34 -07001194 nomsi [MSI] If the PCI_MSI kernel config parameter is
1195 enabled, this kernel boot option can be used to
1196 disable the use of MSI interrupts system-wide.
Randy Dunlapa9913042005-10-23 12:57:11 -07001197 nosort [IA-32] Don't sort PCI devices according to
1198 order given by the PCI BIOS. This sorting is
1199 done to get a device order compatible with
1200 older kernels.
1201 biosirq [IA-32] Use PCI BIOS calls to get the interrupt
1202 routing table. These calls are known to be buggy
1203 on several machines and they hang the machine
1204 when used, but on other computers it's the only
1205 way to get the interrupt routing table. Try
1206 this option if the kernel is unable to allocate
1207 IRQs or discover secondary PCI buses on your
1208 motherboard.
1209 rom [IA-32] Assign address space to expansion ROMs.
1210 Use with caution as certain devices share
1211 address decoders between ROMs and other
1212 resources.
1213 irqmask=0xMMMM [IA-32] Set a bit mask of IRQs allowed to be
1214 assigned automatically to PCI devices. You can
1215 make the kernel exclude IRQs of your ISA cards
1216 this way.
jayalk@intworks.biz120bb422005-03-21 20:20:42 -08001217 pirqaddr=0xAAAAA [IA-32] Specify the physical address
Randy Dunlapa9913042005-10-23 12:57:11 -07001218 of the PIRQ table (normally generated
1219 by the BIOS) if it is outside the
1220 F0000h-100000h range.
1221 lastbus=N [IA-32] Scan all buses thru bus #N. Can be
1222 useful if the kernel is unable to find your
1223 secondary buses and you want to tell it
1224 explicitly which ones they are.
1225 assign-busses [IA-32] Always assign all PCI bus
1226 numbers ourselves, overriding
1227 whatever the firmware may have done.
1228 usepirqmask [IA-32] Honor the possible IRQ mask stored
1229 in the BIOS $PIR table. This is needed on
1230 some systems with broken BIOSes, notably
1231 some HP Pavilion N5400 and Omnibook XE3
1232 notebooks. This will have no effect if ACPI
1233 IRQ routing is enabled.
1234 noacpi [IA-32] Do not use ACPI for IRQ routing
1235 or for PCI scanning.
1236 routeirq Do IRQ routing for all PCI devices.
1237 This is normally done in pci_enable_device(),
1238 so this option is a temporary workaround
1239 for broken drivers that don't call it.
1240 firmware [ARM] Do not re-enumerate the bus but instead
1241 just use the configuration from the
1242 bootloader. This is currently used on
1243 IXP2000 systems where the bus has to be
1244 configured a certain way for adjunct CPUs.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001245
1246 pcmv= [HW,PCMCIA] BadgePAD 4
1247
1248 pd. [PARIDE]
1249 See Documentation/paride.txt.
1250
1251 pdcchassis= [PARISC,HW] Disable/Enable PDC Chassis Status codes at
1252 boot time.
1253 Format: { 0 | 1 }
1254 See arch/parisc/kernel/pdc_chassis.c
1255
1256 pf. [PARIDE]
1257 See Documentation/paride.txt.
1258
1259 pg. [PARIDE]
1260 See Documentation/paride.txt.
1261
1262 pirq= [SMP,APIC] Manual mp-table setup
1263 See Documentation/i386/IO-APIC.txt.
1264
1265 plip= [PPT,NET] Parallel port network link
1266 Format: { parport<nr> | timid | 0 }
1267 See also Documentation/parport.txt.
1268
1269 pnpacpi= [ACPI]
1270 { off }
1271
1272 pnpbios= [ISAPNP]
1273 { on | off | curr | res | no-curr | no-res }
1274
1275 pnp_reserve_irq=
1276 [ISAPNP] Exclude IRQs for the autoconfiguration
1277
1278 pnp_reserve_dma=
1279 [ISAPNP] Exclude DMAs for the autoconfiguration
1280
1281 pnp_reserve_io= [ISAPNP] Exclude I/O ports for the autoconfiguration
Randy Dunlapa9913042005-10-23 12:57:11 -07001282 Ranges are in pairs (I/O port base and size).
Linus Torvalds1da177e2005-04-16 15:20:36 -07001283
1284 pnp_reserve_mem=
Randy Dunlapa9913042005-10-23 12:57:11 -07001285 [ISAPNP] Exclude memory regions for the
1286 autoconfiguration.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001287 Ranges are in pairs (memory base and size).
1288
1289 profile= [KNL] Enable kernel profiling via /proc/profile
Randy Dunlapa9913042005-10-23 12:57:11 -07001290 Format: [schedule,]<number>
1291 Param: "schedule" - profile schedule points.
1292 Param: <number> - step/bucket size as a power of 2 for
1293 statistical time based profiling.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001294
Randy Dunlapa9913042005-10-23 12:57:11 -07001295 processor.max_cstate= [HW,ACPI]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001296 Limit processor to maximum C-state
1297 max_cstate=9 overrides any DMI blacklist limit.
1298
Len Brown41c0d862005-12-28 12:43:51 -05001299 processor.nocst [HW,ACPI]
1300 Ignore the _CST method to determine C-states,
1301 instead using the legacy FADT method
1302
Linus Torvalds1da177e2005-04-16 15:20:36 -07001303 prompt_ramdisk= [RAM] List of RAM disks to prompt for floppy disk
1304 before loading.
1305 See Documentation/ramdisk.txt.
1306
Randy Dunlapa9913042005-10-23 12:57:11 -07001307 psmouse.proto= [HW,MOUSE] Highest PS2 mouse protocol extension to
1308 probe for; one of (bare|imps|exps|lifebook|any).
Linus Torvalds1da177e2005-04-16 15:20:36 -07001309 psmouse.rate= [HW,MOUSE] Set desired mouse report rate, in reports
1310 per second.
Randy Dunlapa9913042005-10-23 12:57:11 -07001311 psmouse.resetafter= [HW,MOUSE]
1312 Try to reset the device after so many bad packets
Linus Torvalds1da177e2005-04-16 15:20:36 -07001313 (0 = never).
1314 psmouse.resolution=
1315 [HW,MOUSE] Set desired mouse resolution, in dpi.
1316 psmouse.smartscroll=
Randy Dunlapa9913042005-10-23 12:57:11 -07001317 [HW,MOUSE] Controls Logitech smartscroll autorepeat.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001318 0 = disabled, 1 = enabled (default).
1319
1320 pss= [HW,OSS] Personal Sound System (ECHO ESC614)
Randy Dunlapa9913042005-10-23 12:57:11 -07001321 Format:
1322 <io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq>
Linus Torvalds1da177e2005-04-16 15:20:36 -07001323
1324 pt. [PARIDE]
1325 See Documentation/paride.txt.
1326
1327 quiet= [KNL] Disable log messages
Randy Dunlapa9913042005-10-23 12:57:11 -07001328
Linus Torvalds1da177e2005-04-16 15:20:36 -07001329 r128= [HW,DRM]
1330
1331 raid= [HW,RAID]
1332 See Documentation/md.txt.
1333
1334 ramdisk= [RAM] Sizes of RAM disks in kilobytes [deprecated]
1335 See Documentation/ramdisk.txt.
1336
Randy Dunlapa9913042005-10-23 12:57:11 -07001337 ramdisk_blocksize= [RAM]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001338 See Documentation/ramdisk.txt.
Randy Dunlapa9913042005-10-23 12:57:11 -07001339
Linus Torvalds1da177e2005-04-16 15:20:36 -07001340 ramdisk_size= [RAM] Sizes of RAM disks in kilobytes
1341 New name for the ramdisk parameter.
1342 See Documentation/ramdisk.txt.
1343
Dipankar Sarma21a1ea92006-03-07 21:55:33 -08001344 rcu.blimit= [KNL,BOOT] Set maximum number of finished
1345 RCU callbacks to process in one batch.
1346
1347 rcu.qhimark= [KNL,BOOT] Set threshold of queued
1348 RCU callbacks over which batch limiting is disabled.
1349
1350 rcu.qlowmark= [KNL,BOOT] Set threshold of queued
1351 RCU callbacks below which batch limiting is re-enabled.
1352
1353 rcu.rsinterval= [KNL,BOOT,SMP] Set the number of additional
1354 RCU callbacks to queued before forcing reschedule
1355 on all cpus.
1356
Olof Johanssonffdfc402005-09-06 15:17:19 -07001357 rdinit= [KNL]
1358 Format: <full_path>
1359 Run specified binary instead of /init from the ramdisk,
1360 used for early userspace startup. See initrd.
1361
Linus Torvalds1da177e2005-04-16 15:20:36 -07001362 reboot= [BUGS=IA-32,BUGS=ARM,BUGS=IA-64] Rebooting mode
1363 Format: <reboot_mode>[,<reboot_mode2>[,...]]
1364 See arch/*/kernel/reboot.c.
1365
1366 reserve= [KNL,BUGS] Force the kernel to ignore some iomem area
1367
Randy Dunlapa9913042005-10-23 12:57:11 -07001368 resume= [SWSUSP]
1369 Specify the partition device for software suspend
Linus Torvalds1da177e2005-04-16 15:20:36 -07001370
1371 rhash_entries= [KNL,NET]
1372 Set number of hash buckets for route cache
1373
1374 riscom8= [HW,SERIAL]
1375 Format: <io_board1>[,<io_board2>[,...<io_boardN>]]
1376
1377 ro [KNL] Mount root device read-only on boot
1378
1379 root= [KNL] Root filesystem
1380
1381 rootdelay= [KNL] Delay (in seconds) to pause before attempting to
1382 mount the root filesystem
1383
1384 rootflags= [KNL] Set root filesystem mount option string
1385
1386 rootfstype= [KNL] Set root filesystem type
1387
1388 rw [KNL] Mount root device read-write on boot
1389
1390 S [KNL] Run init in single mode
1391
1392 sa1100ir [NET]
1393 See drivers/net/irda/sa1100_ir.c.
1394
1395 sb= [HW,OSS]
1396 Format: <io>,<irq>,<dma>,<dma2>
1397
1398 sbni= [NET] Granch SBNI12 leased line adapter
Randy Dunlapa9913042005-10-23 12:57:11 -07001399
Linus Torvalds1da177e2005-04-16 15:20:36 -07001400 sbpcd= [HW,CD] Soundblaster CD adapter
1401 Format: <io>,<type>
1402 See a comment before function sbpcd_setup() in
1403 drivers/cdrom/sbpcd.c.
1404
1405 sc1200wdt= [HW,WDT] SC1200 WDT (watchdog) driver
1406 Format: <io>[,<timeout>[,<isapnp>]]
1407
1408 scsi_debug_*= [SCSI]
1409 See drivers/scsi/scsi_debug.c.
1410
1411 scsi_default_dev_flags=
1412 [SCSI] SCSI default device flags
1413 Format: <integer>
1414
1415 scsi_dev_flags= [SCSI] Black/white list entry for vendor and model
1416 Format: <vendor>:<model>:<flags>
1417 (flags are integer value)
1418
1419 scsi_logging= [SCSI]
1420
1421 selinux [SELINUX] Disable or enable SELinux at boot time.
1422 Format: { "0" | "1" }
1423 See security/selinux/Kconfig help text.
1424 0 -- disable.
1425 1 -- enable.
1426 Default value is set via kernel config option.
1427 If enabled at boot time, /selinux/disable can be used
1428 later to disable prior to initial policy load.
1429
James Morris4e5ab4c2006-06-09 00:33:33 -07001430 selinux_compat_net =
1431 [SELINUX] Set initial selinux_compat_net flag value.
1432 Format: { "0" | "1" }
1433 0 -- use new secmark-based packet controls
1434 1 -- use legacy packet controls
1435 Default value is 0 (preferred).
1436 Value can be changed at runtime via
1437 /selinux/compat_net.
1438
Linus Torvalds1da177e2005-04-16 15:20:36 -07001439 serialnumber [BUGS=IA-32]
1440
Randy Dunlapa9913042005-10-23 12:57:11 -07001441 sg_def_reserved_size= [SCSI]
1442
Linus Torvalds1da177e2005-04-16 15:20:36 -07001443 sgalaxy= [HW,OSS]
1444 Format: <io>,<irq>,<dma>,<dma2>,<sgbase>
1445
1446 shapers= [NET]
1447 Maximal number of shapers.
Randy Dunlapa9913042005-10-23 12:57:11 -07001448
Linus Torvalds1da177e2005-04-16 15:20:36 -07001449 sim710= [SCSI,HW]
1450 See header of drivers/scsi/sim710.c.
1451
1452 simeth= [IA-64]
1453 simscsi=
Randy Dunlapa9913042005-10-23 12:57:11 -07001454
Linus Torvalds1da177e2005-04-16 15:20:36 -07001455 sjcd= [HW,CD]
1456 Format: <io>,<irq>,<dma>
1457 See header of drivers/cdrom/sjcd.c.
1458
1459 slram= [HW,MTD]
1460
1461 smart2= [HW]
1462 Format: <io1>[,<io2>[,...,<io8>]]
1463
1464 snd-ad1816a= [HW,ALSA]
1465
1466 snd-ad1848= [HW,ALSA]
1467
1468 snd-ali5451= [HW,ALSA]
1469
1470 snd-als100= [HW,ALSA]
1471
1472 snd-als4000= [HW,ALSA]
1473
1474 snd-azt2320= [HW,ALSA]
1475
1476 snd-cmi8330= [HW,ALSA]
1477
1478 snd-cmipci= [HW,ALSA]
1479
1480 snd-cs4231= [HW,ALSA]
1481
1482 snd-cs4232= [HW,ALSA]
1483
1484 snd-cs4236= [HW,ALSA]
1485
1486 snd-cs4281= [HW,ALSA]
1487
1488 snd-cs46xx= [HW,ALSA]
1489
1490 snd-dt019x= [HW,ALSA]
1491
1492 snd-dummy= [HW,ALSA]
1493
1494 snd-emu10k1= [HW,ALSA]
1495
1496 snd-ens1370= [HW,ALSA]
1497
1498 snd-ens1371= [HW,ALSA]
1499
1500 snd-es968= [HW,ALSA]
1501
1502 snd-es1688= [HW,ALSA]
1503
1504 snd-es18xx= [HW,ALSA]
1505
1506 snd-es1938= [HW,ALSA]
1507
1508 snd-es1968= [HW,ALSA]
1509
1510 snd-fm801= [HW,ALSA]
1511
1512 snd-gusclassic= [HW,ALSA]
1513
1514 snd-gusextreme= [HW,ALSA]
1515
1516 snd-gusmax= [HW,ALSA]
1517
1518 snd-hdsp= [HW,ALSA]
1519
1520 snd-ice1712= [HW,ALSA]
1521
1522 snd-intel8x0= [HW,ALSA]
1523
1524 snd-interwave= [HW,ALSA]
1525
1526 snd-interwave-stb=
1527 [HW,ALSA]
1528
1529 snd-korg1212= [HW,ALSA]
1530
1531 snd-maestro3= [HW,ALSA]
1532
1533 snd-mpu401= [HW,ALSA]
1534
1535 snd-mtpav= [HW,ALSA]
1536
1537 snd-nm256= [HW,ALSA]
1538
1539 snd-opl3sa2= [HW,ALSA]
1540
1541 snd-opti92x-ad1848=
1542 [HW,ALSA]
1543
1544 snd-opti92x-cs4231=
1545 [HW,ALSA]
1546
1547 snd-opti93x= [HW,ALSA]
1548
1549 snd-pmac= [HW,ALSA]
1550
1551 snd-rme32= [HW,ALSA]
1552
1553 snd-rme96= [HW,ALSA]
1554
1555 snd-rme9652= [HW,ALSA]
1556
1557 snd-sb8= [HW,ALSA]
1558
1559 snd-sb16= [HW,ALSA]
1560
1561 snd-sbawe= [HW,ALSA]
1562
1563 snd-serial= [HW,ALSA]
1564
1565 snd-sgalaxy= [HW,ALSA]
1566
1567 snd-sonicvibes= [HW,ALSA]
1568
1569 snd-sun-amd7930=
1570 [HW,ALSA]
1571
1572 snd-sun-cs4231= [HW,ALSA]
1573
1574 snd-trident= [HW,ALSA]
1575
1576 snd-usb-audio= [HW,ALSA,USB]
1577
1578 snd-via82xx= [HW,ALSA]
1579
1580 snd-virmidi= [HW,ALSA]
1581
1582 snd-wavefront= [HW,ALSA]
1583
1584 snd-ymfpci= [HW,ALSA]
Randy Dunlapa9913042005-10-23 12:57:11 -07001585
Linus Torvalds1da177e2005-04-16 15:20:36 -07001586 sonicvibes= [HW,OSS]
1587 Format: <reverb>
Randy Dunlapa9913042005-10-23 12:57:11 -07001588
Linus Torvalds1da177e2005-04-16 15:20:36 -07001589 sonycd535= [HW,CD]
1590 Format: <io>[,<irq>]
1591
1592 sonypi.*= [HW] Sony Programmable I/O Control Device driver
1593 See Documentation/sonypi.txt
1594
1595 specialix= [HW,SERIAL] Specialix multi-serial port adapter
1596 See Documentation/specialix.txt.
1597
1598 spia_io_base= [HW,MTD]
1599 spia_fio_base=
1600 spia_pedr=
1601 spia_peddr=
1602
1603 sscape= [HW,OSS]
1604 Format: <io>,<irq>,<dma>,<mpu_io>,<mpu_irq>
Randy Dunlapa9913042005-10-23 12:57:11 -07001605
Linus Torvalds1da177e2005-04-16 15:20:36 -07001606 st= [HW,SCSI] SCSI tape parameters (buffers, etc.)
1607 See Documentation/scsi/st.txt.
1608
1609 st0x= [HW,SCSI]
1610 See header of drivers/scsi/seagate.c.
1611
1612 sti= [PARISC,HW]
1613 Format: <num>
1614 Set the STI (builtin display/keyboard on the HP-PARISC
1615 machines) console (graphic card) which should be used
1616 as the initial boot-console.
1617 See also comment in drivers/video/console/sticore.c.
1618
1619 sti_font= [HW]
1620 See comment in drivers/video/console/sticore.c.
1621
1622 stifb= [HW]
1623 Format: bpp:<bpp1>[:<bpp2>[:<bpp3>...]]
1624
Linus Torvalds1da177e2005-04-16 15:20:36 -07001625 swiotlb= [IA-64] Number of I/O TLB slabs
Randy Dunlapa9913042005-10-23 12:57:11 -07001626
Linus Torvalds1da177e2005-04-16 15:20:36 -07001627 switches= [HW,M68k]
1628
1629 sym53c416= [HW,SCSI]
1630 See header of drivers/scsi/sym53c416.c.
1631
1632 t128= [HW,SCSI]
1633 See header of drivers/scsi/t128.c.
1634
1635 tdfx= [HW,DRM]
1636
1637 thash_entries= [KNL,NET]
1638 Set number of hash buckets for TCP connection
1639
1640 time Show timing data prefixed to each printk message line
1641
john stultz734efb42006-06-26 00:25:05 -07001642 clocksource= [GENERIC_TIME] Override the default clocksource
1643 Override the default clocksource and use the clocksource
1644 with the name specified.
1645
Linus Torvalds1da177e2005-04-16 15:20:36 -07001646 tipar.timeout= [HW,PPT]
1647 Set communications timeout in tenths of a second
1648 (default 15).
1649
1650 tipar.delay= [HW,PPT]
1651 Set inter-bit delay in microseconds (default 10).
1652
1653 tmc8xx= [HW,SCSI]
1654 See header of drivers/scsi/seagate.c.
1655
1656 tmscsim= [HW,SCSI]
1657 See comment before function dc390_setup() in
1658 drivers/scsi/tmscsim.c.
1659
1660 tp720= [HW,PS2]
1661
1662 trix= [HW,OSS] MediaTrix AudioTrix Pro
Randy Dunlapa9913042005-10-23 12:57:11 -07001663 Format:
1664 <io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
1665
Linus Torvalds1da177e2005-04-16 15:20:36 -07001666 tsdev.xres= [TS] Horizontal screen resolution.
1667 tsdev.yres= [TS] Vertical screen resolution.
1668
Randy Dunlapa9913042005-10-23 12:57:11 -07001669 turbografx.map[2|3]= [HW,JOY]
1670 TurboGraFX parallel port interface
1671 Format:
1672 <port#>,<js1>,<js2>,<js3>,<js4>,<js5>,<js6>,<js7>
Linus Torvalds1da177e2005-04-16 15:20:36 -07001673 See also Documentation/input/joystick-parport.txt
1674
1675 u14-34f= [HW,SCSI] UltraStor 14F/34F SCSI host adapter
1676 See header of drivers/scsi/u14-34f.c.
1677
1678 uart401= [HW,OSS]
1679 Format: <io>,<irq>
1680
1681 uart6850= [HW,OSS]
1682 Format: <io>,<irq>
1683
Linus Torvalds1da177e2005-04-16 15:20:36 -07001684 usbhid.mousepoll=
1685 [USBHID] The interval which mice are to be polled at.
Randy Dunlapa9913042005-10-23 12:57:11 -07001686
Ingo Molnare6e54942006-06-27 02:53:50 -07001687 vdso= [IA-32]
1688 vdso=1: enable VDSO (default)
1689 vdso=0: disable VDSO mapping
1690
Linus Torvalds1da177e2005-04-16 15:20:36 -07001691 video= [FB] Frame buffer configuration
1692 See Documentation/fb/modedb.txt.
1693
1694 vga= [BOOT,IA-32] Select a particular video mode
Randy Dunlapa9913042005-10-23 12:57:11 -07001695 See Documentation/i386/boot.txt and
1696 Documentation/svga.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001697 Use vga=ask for menu.
1698 This is actually a boot loader parameter; the value is
1699 passed to the kernel using a special protocol.
1700
Randy Dunlapa9913042005-10-23 12:57:11 -07001701 vmalloc=nn[KMG] [KNL,BOOT] Forces the vmalloc area to have an exact
Linus Torvalds1da177e2005-04-16 15:20:36 -07001702 size of <nn>. This can be used to increase the
1703 minimum size (128MB on x86). It can also be used to
1704 decrease the size and leave more room for directly
1705 mapped kernel RAM.
1706
Peter Oberparleiter585c3042006-06-29 15:08:25 +02001707 vmhalt= [KNL,S390] Perform z/VM CP command after system halt.
1708 Format: <command>
Linus Torvalds1da177e2005-04-16 15:20:36 -07001709
Peter Oberparleiter585c3042006-06-29 15:08:25 +02001710 vmpanic= [KNL,S390] Perform z/VM CP command after kernel panic.
1711 Format: <command>
1712
1713 vmpoff= [KNL,S390] Perform z/VM CP command after power off.
1714 Format: <command>
Randy Dunlapa9913042005-10-23 12:57:11 -07001715
Linus Torvalds1da177e2005-04-16 15:20:36 -07001716 waveartist= [HW,OSS]
1717 Format: <io>,<irq>,<dma>,<dma2>
Randy Dunlapa9913042005-10-23 12:57:11 -07001718
Linus Torvalds1da177e2005-04-16 15:20:36 -07001719 wd33c93= [HW,SCSI]
1720 See header of drivers/scsi/wd33c93.c.
1721
1722 wd7000= [HW,SCSI]
1723 See header of drivers/scsi/wd7000.c.
1724
1725 wdt= [WDT] Watchdog
1726 See Documentation/watchdog/watchdog.txt.
1727
1728 xd= [HW,XT] Original XT pre-IDE (RLL encoded) disks.
1729 xd_geo= See header of drivers/block/xd.c.
1730
1731 xirc2ps_cs= [NET,PCMCIA]
Randy Dunlapa9913042005-10-23 12:57:11 -07001732 Format:
1733 <irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001734
Andi Kleena62eaf12006-02-16 23:41:58 +01001735 norandmaps Don't use address space randomization
1736 Equivalent to echo 0 > /proc/sys/kernel/randomize_va_space
1737
Linus Torvalds1da177e2005-04-16 15:20:36 -07001738
Randy Dunlapa9913042005-10-23 12:57:11 -07001739______________________________________________________________________
Linus Torvalds1da177e2005-04-16 15:20:36 -07001740
1741TODO:
1742
1743 Add documentation for ALSA options.
1744 Add more DRM drivers.