blob: 1c459343292bb6b910cf28322293df912bfb9323 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001
2/*
3
4 Linux Driver for BusLogic MultiMaster and FlashPoint SCSI Host Adapters
5
6 Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
7
8 This program is free software; you may redistribute and/or modify it under
9 the terms of the GNU General Public License Version 2 as published by the
10 Free Software Foundation.
11
12 This program is distributed in the hope that it will be useful, but
13 WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
14 or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
15 for complete details.
16
17 The author respectfully requests that any modifications to this software be
18 sent directly to him for evaluation and testing.
19
20 Special thanks to Wayne Yen, Jin-Lon Hon, and Alex Win of BusLogic, whose
21 advice has been invaluable, to David Gentzel, for writing the original Linux
22 BusLogic driver, and to Paul Gortmaker, for being such a dedicated test site.
23
24 Finally, special thanks to Mylex/BusLogic for making the FlashPoint SCCB
25 Manager available as freely redistributable source code.
26
27*/
28
29#define BusLogic_DriverVersion "2.1.16"
30#define BusLogic_DriverDate "18 July 2002"
31
32#include <linux/config.h>
33#include <linux/module.h>
34#include <linux/init.h>
35#include <linux/interrupt.h>
36#include <linux/types.h>
37#include <linux/blkdev.h>
38#include <linux/delay.h>
39#include <linux/ioport.h>
40#include <linux/mm.h>
41#include <linux/stat.h>
42#include <linux/pci.h>
43#include <linux/spinlock.h>
44#include <scsi/scsicam.h>
45
46#include <asm/dma.h>
47#include <asm/io.h>
48#include <asm/system.h>
49
50#include <scsi/scsi.h>
51#include <scsi/scsi_cmnd.h>
52#include <scsi/scsi_device.h>
53#include <scsi/scsi_host.h>
54#include <scsi/scsi_tcq.h>
55#include "BusLogic.h"
56#include "FlashPoint.c"
57
58#ifndef FAILURE
59#define FAILURE (-1)
60#endif
61
62static struct scsi_host_template Bus_Logic_template;
63
64/*
65 BusLogic_DriverOptionsCount is a count of the number of BusLogic Driver
66 Options specifications provided via the Linux Kernel Command Line or via
67 the Loadable Kernel Module Installation Facility.
68*/
69
70static int BusLogic_DriverOptionsCount;
71
72
73/*
74 BusLogic_DriverOptions is an array of Driver Options structures representing
75 BusLogic Driver Options specifications provided via the Linux Kernel Command
76 Line or via the Loadable Kernel Module Installation Facility.
77*/
78
79static struct BusLogic_DriverOptions BusLogic_DriverOptions[BusLogic_MaxHostAdapters];
80
81
82/*
83 BusLogic can be assigned a string by insmod.
84*/
85
86MODULE_LICENSE("GPL");
87#ifdef MODULE
88static char *BusLogic;
89module_param(BusLogic, charp, 0);
90#endif
91
92
93/*
94 BusLogic_ProbeOptions is a set of Probe Options to be applied across
95 all BusLogic Host Adapters.
96*/
97
98static struct BusLogic_ProbeOptions BusLogic_ProbeOptions;
99
100
101/*
102 BusLogic_GlobalOptions is a set of Global Options to be applied across
103 all BusLogic Host Adapters.
104*/
105
106static struct BusLogic_GlobalOptions BusLogic_GlobalOptions;
107
108static LIST_HEAD(BusLogic_host_list);
109
110/*
111 BusLogic_ProbeInfoCount is the number of entries in BusLogic_ProbeInfoList.
112*/
113
114static int BusLogic_ProbeInfoCount;
115
116
117/*
118 BusLogic_ProbeInfoList is the list of I/O Addresses and Bus Probe Information
119 to be checked for potential BusLogic Host Adapters. It is initialized by
120 interrogating the PCI Configuration Space on PCI machines as well as from the
121 list of standard BusLogic I/O Addresses.
122*/
123
124static struct BusLogic_ProbeInfo *BusLogic_ProbeInfoList;
125
126
127/*
128 BusLogic_CommandFailureReason holds a string identifying the reason why a
129 call to BusLogic_Command failed. It is only non-NULL when BusLogic_Command
130 returns a failure code.
131*/
132
133static char *BusLogic_CommandFailureReason;
134
135/*
136 BusLogic_AnnounceDriver announces the Driver Version and Date, Author's
137 Name, Copyright Notice, and Electronic Mail Address.
138*/
139
140static void BusLogic_AnnounceDriver(struct BusLogic_HostAdapter *HostAdapter)
141{
142 BusLogic_Announce("***** BusLogic SCSI Driver Version " BusLogic_DriverVersion " of " BusLogic_DriverDate " *****\n", HostAdapter);
143 BusLogic_Announce("Copyright 1995-1998 by Leonard N. Zubkoff " "<lnz@dandelion.com>\n", HostAdapter);
144}
145
146
147/*
148 BusLogic_DriverInfo returns the Host Adapter Name to identify this SCSI
149 Driver and Host Adapter.
150*/
151
152static const char *BusLogic_DriverInfo(struct Scsi_Host *Host)
153{
154 struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) Host->hostdata;
155 return HostAdapter->FullModelName;
156}
157
158/*
159 BusLogic_InitializeCCBs initializes a group of Command Control Blocks (CCBs)
160 for Host Adapter from the BlockSize bytes located at BlockPointer. The newly
161 created CCBs are added to Host Adapter's free list.
162*/
163
164static void BusLogic_InitializeCCBs(struct BusLogic_HostAdapter *HostAdapter, void *BlockPointer, int BlockSize, dma_addr_t BlockPointerHandle)
165{
166 struct BusLogic_CCB *CCB = (struct BusLogic_CCB *) BlockPointer;
167 unsigned int offset = 0;
168 memset(BlockPointer, 0, BlockSize);
169 CCB->AllocationGroupHead = BlockPointerHandle;
170 CCB->AllocationGroupSize = BlockSize;
171 while ((BlockSize -= sizeof(struct BusLogic_CCB)) >= 0) {
172 CCB->Status = BusLogic_CCB_Free;
173 CCB->HostAdapter = HostAdapter;
174 CCB->DMA_Handle = (u32) BlockPointerHandle + offset;
175 if (BusLogic_FlashPointHostAdapterP(HostAdapter)) {
176 CCB->CallbackFunction = BusLogic_QueueCompletedCCB;
177 CCB->BaseAddress = HostAdapter->FlashPointInfo.BaseAddress;
178 }
179 CCB->Next = HostAdapter->Free_CCBs;
180 CCB->NextAll = HostAdapter->All_CCBs;
181 HostAdapter->Free_CCBs = CCB;
182 HostAdapter->All_CCBs = CCB;
183 HostAdapter->AllocatedCCBs++;
184 CCB++;
185 offset += sizeof(struct BusLogic_CCB);
186 }
187}
188
189
190/*
191 BusLogic_CreateInitialCCBs allocates the initial CCBs for Host Adapter.
192*/
193
194static boolean __init BusLogic_CreateInitialCCBs(struct BusLogic_HostAdapter *HostAdapter)
195{
196 int BlockSize = BusLogic_CCB_AllocationGroupSize * sizeof(struct BusLogic_CCB);
197 void *BlockPointer;
198 dma_addr_t BlockPointerHandle;
199 while (HostAdapter->AllocatedCCBs < HostAdapter->InitialCCBs) {
200 BlockPointer = pci_alloc_consistent(HostAdapter->PCI_Device, BlockSize, &BlockPointerHandle);
201 if (BlockPointer == NULL) {
202 BusLogic_Error("UNABLE TO ALLOCATE CCB GROUP - DETACHING\n", HostAdapter);
203 return false;
204 }
205 BusLogic_InitializeCCBs(HostAdapter, BlockPointer, BlockSize, BlockPointerHandle);
206 }
207 return true;
208}
209
210
211/*
212 BusLogic_DestroyCCBs deallocates the CCBs for Host Adapter.
213*/
214
215static void BusLogic_DestroyCCBs(struct BusLogic_HostAdapter *HostAdapter)
216{
217 struct BusLogic_CCB *NextCCB = HostAdapter->All_CCBs, *CCB, *Last_CCB = NULL;
218 HostAdapter->All_CCBs = NULL;
219 HostAdapter->Free_CCBs = NULL;
220 while ((CCB = NextCCB) != NULL) {
221 NextCCB = CCB->NextAll;
222 if (CCB->AllocationGroupHead) {
223 if (Last_CCB)
224 pci_free_consistent(HostAdapter->PCI_Device, Last_CCB->AllocationGroupSize, Last_CCB, Last_CCB->AllocationGroupHead);
225 Last_CCB = CCB;
226 }
227 }
228 if (Last_CCB)
229 pci_free_consistent(HostAdapter->PCI_Device, Last_CCB->AllocationGroupSize, Last_CCB, Last_CCB->AllocationGroupHead);
230}
231
232
233/*
234 BusLogic_CreateAdditionalCCBs allocates Additional CCBs for Host Adapter. If
235 allocation fails and there are no remaining CCBs available, the Driver Queue
236 Depth is decreased to a known safe value to avoid potential deadlocks when
237 multiple host adapters share the same IRQ Channel.
238*/
239
240static void BusLogic_CreateAdditionalCCBs(struct BusLogic_HostAdapter *HostAdapter, int AdditionalCCBs, boolean SuccessMessageP)
241{
242 int BlockSize = BusLogic_CCB_AllocationGroupSize * sizeof(struct BusLogic_CCB);
243 int PreviouslyAllocated = HostAdapter->AllocatedCCBs;
244 void *BlockPointer;
245 dma_addr_t BlockPointerHandle;
246 if (AdditionalCCBs <= 0)
247 return;
248 while (HostAdapter->AllocatedCCBs - PreviouslyAllocated < AdditionalCCBs) {
249 BlockPointer = pci_alloc_consistent(HostAdapter->PCI_Device, BlockSize, &BlockPointerHandle);
250 if (BlockPointer == NULL)
251 break;
252 BusLogic_InitializeCCBs(HostAdapter, BlockPointer, BlockSize, BlockPointerHandle);
253 }
254 if (HostAdapter->AllocatedCCBs > PreviouslyAllocated) {
255 if (SuccessMessageP)
256 BusLogic_Notice("Allocated %d additional CCBs (total now %d)\n", HostAdapter, HostAdapter->AllocatedCCBs - PreviouslyAllocated, HostAdapter->AllocatedCCBs);
257 return;
258 }
259 BusLogic_Notice("Failed to allocate additional CCBs\n", HostAdapter);
260 if (HostAdapter->DriverQueueDepth > HostAdapter->AllocatedCCBs - HostAdapter->TargetDeviceCount) {
261 HostAdapter->DriverQueueDepth = HostAdapter->AllocatedCCBs - HostAdapter->TargetDeviceCount;
262 HostAdapter->SCSI_Host->can_queue = HostAdapter->DriverQueueDepth;
263 }
264}
265
266/*
267 BusLogic_AllocateCCB allocates a CCB from Host Adapter's free list,
268 allocating more memory from the Kernel if necessary. The Host Adapter's
269 Lock should already have been acquired by the caller.
270*/
271
272static struct BusLogic_CCB *BusLogic_AllocateCCB(struct BusLogic_HostAdapter
273 *HostAdapter)
274{
275 static unsigned long SerialNumber = 0;
276 struct BusLogic_CCB *CCB;
277 CCB = HostAdapter->Free_CCBs;
278 if (CCB != NULL) {
279 CCB->SerialNumber = ++SerialNumber;
280 HostAdapter->Free_CCBs = CCB->Next;
281 CCB->Next = NULL;
282 if (HostAdapter->Free_CCBs == NULL)
283 BusLogic_CreateAdditionalCCBs(HostAdapter, HostAdapter->IncrementalCCBs, true);
284 return CCB;
285 }
286 BusLogic_CreateAdditionalCCBs(HostAdapter, HostAdapter->IncrementalCCBs, true);
287 CCB = HostAdapter->Free_CCBs;
288 if (CCB == NULL)
289 return NULL;
290 CCB->SerialNumber = ++SerialNumber;
291 HostAdapter->Free_CCBs = CCB->Next;
292 CCB->Next = NULL;
293 return CCB;
294}
295
296
297/*
298 BusLogic_DeallocateCCB deallocates a CCB, returning it to the Host Adapter's
299 free list. The Host Adapter's Lock should already have been acquired by the
300 caller.
301*/
302
303static void BusLogic_DeallocateCCB(struct BusLogic_CCB *CCB)
304{
305 struct BusLogic_HostAdapter *HostAdapter = CCB->HostAdapter;
306 struct scsi_cmnd *cmd = CCB->Command;
307
308 if (cmd->use_sg != 0) {
309 pci_unmap_sg(HostAdapter->PCI_Device,
310 (struct scatterlist *)cmd->request_buffer,
311 cmd->use_sg, cmd->sc_data_direction);
312 } else if (cmd->request_bufflen != 0) {
313 pci_unmap_single(HostAdapter->PCI_Device, CCB->DataPointer,
314 CCB->DataLength, cmd->sc_data_direction);
315 }
316 pci_unmap_single(HostAdapter->PCI_Device, CCB->SenseDataPointer,
317 CCB->SenseDataLength, PCI_DMA_FROMDEVICE);
318
319 CCB->Command = NULL;
320 CCB->Status = BusLogic_CCB_Free;
321 CCB->Next = HostAdapter->Free_CCBs;
322 HostAdapter->Free_CCBs = CCB;
323}
324
325
326/*
327 BusLogic_Command sends the command OperationCode to HostAdapter, optionally
328 providing ParameterLength bytes of ParameterData and receiving at most
329 ReplyLength bytes of ReplyData; any excess reply data is received but
330 discarded.
331
332 On success, this function returns the number of reply bytes read from
333 the Host Adapter (including any discarded data); on failure, it returns
334 -1 if the command was invalid, or -2 if a timeout occurred.
335
336 BusLogic_Command is called exclusively during host adapter detection and
337 initialization, so performance and latency are not critical, and exclusive
338 access to the Host Adapter hardware is assumed. Once the host adapter and
339 driver are initialized, the only Host Adapter command that is issued is the
340 single byte Execute Mailbox Command operation code, which does not require
341 waiting for the Host Adapter Ready bit to be set in the Status Register.
342*/
343
344static int BusLogic_Command(struct BusLogic_HostAdapter *HostAdapter, enum BusLogic_OperationCode OperationCode, void *ParameterData, int ParameterLength, void *ReplyData, int ReplyLength)
345{
346 unsigned char *ParameterPointer = (unsigned char *) ParameterData;
347 unsigned char *ReplyPointer = (unsigned char *) ReplyData;
348 union BusLogic_StatusRegister StatusRegister;
349 union BusLogic_InterruptRegister InterruptRegister;
350 unsigned long ProcessorFlags = 0;
351 int ReplyBytes = 0, Result;
352 long TimeoutCounter;
353 /*
354 Clear out the Reply Data if provided.
355 */
356 if (ReplyLength > 0)
357 memset(ReplyData, 0, ReplyLength);
358 /*
359 If the IRQ Channel has not yet been acquired, then interrupts must be
360 disabled while issuing host adapter commands since a Command Complete
361 interrupt could occur if the IRQ Channel was previously enabled by another
362 BusLogic Host Adapter or another driver sharing the same IRQ Channel.
363 */
364 if (!HostAdapter->IRQ_ChannelAcquired) {
365 local_irq_save(ProcessorFlags);
366 local_irq_disable();
367 }
368 /*
369 Wait for the Host Adapter Ready bit to be set and the Command/Parameter
370 Register Busy bit to be reset in the Status Register.
371 */
372 TimeoutCounter = 10000;
373 while (--TimeoutCounter >= 0) {
374 StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
375 if (StatusRegister.sr.HostAdapterReady && !StatusRegister.sr.CommandParameterRegisterBusy)
376 break;
377 udelay(100);
378 }
379 if (TimeoutCounter < 0) {
380 BusLogic_CommandFailureReason = "Timeout waiting for Host Adapter Ready";
381 Result = -2;
382 goto Done;
383 }
384 /*
385 Write the OperationCode to the Command/Parameter Register.
386 */
387 HostAdapter->HostAdapterCommandCompleted = false;
388 BusLogic_WriteCommandParameterRegister(HostAdapter, OperationCode);
389 /*
390 Write any additional Parameter Bytes.
391 */
392 TimeoutCounter = 10000;
393 while (ParameterLength > 0 && --TimeoutCounter >= 0) {
394 /*
395 Wait 100 microseconds to give the Host Adapter enough time to determine
396 whether the last value written to the Command/Parameter Register was
397 valid or not. If the Command Complete bit is set in the Interrupt
398 Register, then the Command Invalid bit in the Status Register will be
399 reset if the Operation Code or Parameter was valid and the command
400 has completed, or set if the Operation Code or Parameter was invalid.
401 If the Data In Register Ready bit is set in the Status Register, then
402 the Operation Code was valid, and data is waiting to be read back
403 from the Host Adapter. Otherwise, wait for the Command/Parameter
404 Register Busy bit in the Status Register to be reset.
405 */
406 udelay(100);
407 InterruptRegister.All = BusLogic_ReadInterruptRegister(HostAdapter);
408 StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
409 if (InterruptRegister.ir.CommandComplete)
410 break;
411 if (HostAdapter->HostAdapterCommandCompleted)
412 break;
413 if (StatusRegister.sr.DataInRegisterReady)
414 break;
415 if (StatusRegister.sr.CommandParameterRegisterBusy)
416 continue;
417 BusLogic_WriteCommandParameterRegister(HostAdapter, *ParameterPointer++);
418 ParameterLength--;
419 }
420 if (TimeoutCounter < 0) {
421 BusLogic_CommandFailureReason = "Timeout waiting for Parameter Acceptance";
422 Result = -2;
423 goto Done;
424 }
425 /*
426 The Modify I/O Address command does not cause a Command Complete Interrupt.
427 */
428 if (OperationCode == BusLogic_ModifyIOAddress) {
429 StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
430 if (StatusRegister.sr.CommandInvalid) {
431 BusLogic_CommandFailureReason = "Modify I/O Address Invalid";
432 Result = -1;
433 goto Done;
434 }
435 if (BusLogic_GlobalOptions.TraceConfiguration)
436 BusLogic_Notice("BusLogic_Command(%02X) Status = %02X: " "(Modify I/O Address)\n", HostAdapter, OperationCode, StatusRegister.All);
437 Result = 0;
438 goto Done;
439 }
440 /*
441 Select an appropriate timeout value for awaiting command completion.
442 */
443 switch (OperationCode) {
444 case BusLogic_InquireInstalledDevicesID0to7:
445 case BusLogic_InquireInstalledDevicesID8to15:
446 case BusLogic_InquireTargetDevices:
447 /* Approximately 60 seconds. */
448 TimeoutCounter = 60 * 10000;
449 break;
450 default:
451 /* Approximately 1 second. */
452 TimeoutCounter = 10000;
453 break;
454 }
455 /*
456 Receive any Reply Bytes, waiting for either the Command Complete bit to
457 be set in the Interrupt Register, or for the Interrupt Handler to set the
458 Host Adapter Command Completed bit in the Host Adapter structure.
459 */
460 while (--TimeoutCounter >= 0) {
461 InterruptRegister.All = BusLogic_ReadInterruptRegister(HostAdapter);
462 StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
463 if (InterruptRegister.ir.CommandComplete)
464 break;
465 if (HostAdapter->HostAdapterCommandCompleted)
466 break;
467 if (StatusRegister.sr.DataInRegisterReady) {
468 if (++ReplyBytes <= ReplyLength)
469 *ReplyPointer++ = BusLogic_ReadDataInRegister(HostAdapter);
470 else
471 BusLogic_ReadDataInRegister(HostAdapter);
472 }
473 if (OperationCode == BusLogic_FetchHostAdapterLocalRAM && StatusRegister.sr.HostAdapterReady)
474 break;
475 udelay(100);
476 }
477 if (TimeoutCounter < 0) {
478 BusLogic_CommandFailureReason = "Timeout waiting for Command Complete";
479 Result = -2;
480 goto Done;
481 }
482 /*
483 Clear any pending Command Complete Interrupt.
484 */
485 BusLogic_InterruptReset(HostAdapter);
486 /*
487 Provide tracing information if requested.
488 */
489 if (BusLogic_GlobalOptions.TraceConfiguration) {
490 int i;
491 BusLogic_Notice("BusLogic_Command(%02X) Status = %02X: %2d ==> %2d:", HostAdapter, OperationCode, StatusRegister.All, ReplyLength, ReplyBytes);
492 if (ReplyLength > ReplyBytes)
493 ReplyLength = ReplyBytes;
494 for (i = 0; i < ReplyLength; i++)
495 BusLogic_Notice(" %02X", HostAdapter, ((unsigned char *) ReplyData)[i]);
496 BusLogic_Notice("\n", HostAdapter);
497 }
498 /*
499 Process Command Invalid conditions.
500 */
501 if (StatusRegister.sr.CommandInvalid) {
502 /*
503 Some early BusLogic Host Adapters may not recover properly from
504 a Command Invalid condition, so if this appears to be the case,
505 a Soft Reset is issued to the Host Adapter. Potentially invalid
506 commands are never attempted after Mailbox Initialization is
507 performed, so there should be no Host Adapter state lost by a
508 Soft Reset in response to a Command Invalid condition.
509 */
510 udelay(1000);
511 StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
512 if (StatusRegister.sr.CommandInvalid ||
513 StatusRegister.sr.Reserved ||
514 StatusRegister.sr.DataInRegisterReady ||
515 StatusRegister.sr.CommandParameterRegisterBusy || !StatusRegister.sr.HostAdapterReady || !StatusRegister.sr.InitializationRequired || StatusRegister.sr.DiagnosticActive || StatusRegister.sr.DiagnosticFailure) {
516 BusLogic_SoftReset(HostAdapter);
517 udelay(1000);
518 }
519 BusLogic_CommandFailureReason = "Command Invalid";
520 Result = -1;
521 goto Done;
522 }
523 /*
524 Handle Excess Parameters Supplied conditions.
525 */
526 if (ParameterLength > 0) {
527 BusLogic_CommandFailureReason = "Excess Parameters Supplied";
528 Result = -1;
529 goto Done;
530 }
531 /*
532 Indicate the command completed successfully.
533 */
534 BusLogic_CommandFailureReason = NULL;
535 Result = ReplyBytes;
536 /*
537 Restore the interrupt status if necessary and return.
538 */
539 Done:
540 if (!HostAdapter->IRQ_ChannelAcquired)
541 local_irq_restore(ProcessorFlags);
542 return Result;
543}
544
545
546/*
547 BusLogic_AppendProbeAddressISA appends a single ISA I/O Address to the list
548 of I/O Address and Bus Probe Information to be checked for potential BusLogic
549 Host Adapters.
550*/
551
552static void __init BusLogic_AppendProbeAddressISA(unsigned long IO_Address)
553{
554 struct BusLogic_ProbeInfo *ProbeInfo;
555 if (BusLogic_ProbeInfoCount >= BusLogic_MaxHostAdapters)
556 return;
557 ProbeInfo = &BusLogic_ProbeInfoList[BusLogic_ProbeInfoCount++];
558 ProbeInfo->HostAdapterType = BusLogic_MultiMaster;
559 ProbeInfo->HostAdapterBusType = BusLogic_ISA_Bus;
560 ProbeInfo->IO_Address = IO_Address;
561 ProbeInfo->PCI_Device = NULL;
562}
563
564
565/*
566 BusLogic_InitializeProbeInfoListISA initializes the list of I/O Address and
567 Bus Probe Information to be checked for potential BusLogic SCSI Host Adapters
568 only from the list of standard BusLogic MultiMaster ISA I/O Addresses.
569*/
570
571static void __init BusLogic_InitializeProbeInfoListISA(struct BusLogic_HostAdapter
572 *PrototypeHostAdapter)
573{
574 /*
575 If BusLogic Driver Options specifications requested that ISA Bus Probes
576 be inhibited, do not proceed further.
577 */
578 if (BusLogic_ProbeOptions.NoProbeISA)
579 return;
580 /*
581 Append the list of standard BusLogic MultiMaster ISA I/O Addresses.
582 */
583 if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe330 : check_region(0x330, BusLogic_MultiMasterAddressCount) == 0)
584 BusLogic_AppendProbeAddressISA(0x330);
585 if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe334 : check_region(0x334, BusLogic_MultiMasterAddressCount) == 0)
586 BusLogic_AppendProbeAddressISA(0x334);
587 if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe230 : check_region(0x230, BusLogic_MultiMasterAddressCount) == 0)
588 BusLogic_AppendProbeAddressISA(0x230);
589 if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe234 : check_region(0x234, BusLogic_MultiMasterAddressCount) == 0)
590 BusLogic_AppendProbeAddressISA(0x234);
591 if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe130 : check_region(0x130, BusLogic_MultiMasterAddressCount) == 0)
592 BusLogic_AppendProbeAddressISA(0x130);
593 if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe134 : check_region(0x134, BusLogic_MultiMasterAddressCount) == 0)
594 BusLogic_AppendProbeAddressISA(0x134);
595}
596
597
598#ifdef CONFIG_PCI
599
600
601/*
602 BusLogic_SortProbeInfo sorts a section of BusLogic_ProbeInfoList in order
603 of increasing PCI Bus and Device Number.
604*/
605
606static void __init BusLogic_SortProbeInfo(struct BusLogic_ProbeInfo *ProbeInfoList, int ProbeInfoCount)
607{
608 int LastInterchange = ProbeInfoCount - 1, Bound, j;
609 while (LastInterchange > 0) {
610 Bound = LastInterchange;
611 LastInterchange = 0;
612 for (j = 0; j < Bound; j++) {
613 struct BusLogic_ProbeInfo *ProbeInfo1 = &ProbeInfoList[j];
614 struct BusLogic_ProbeInfo *ProbeInfo2 = &ProbeInfoList[j + 1];
615 if (ProbeInfo1->Bus > ProbeInfo2->Bus || (ProbeInfo1->Bus == ProbeInfo2->Bus && (ProbeInfo1->Device > ProbeInfo2->Device))) {
616 struct BusLogic_ProbeInfo TempProbeInfo;
617 memcpy(&TempProbeInfo, ProbeInfo1, sizeof(struct BusLogic_ProbeInfo));
618 memcpy(ProbeInfo1, ProbeInfo2, sizeof(struct BusLogic_ProbeInfo));
619 memcpy(ProbeInfo2, &TempProbeInfo, sizeof(struct BusLogic_ProbeInfo));
620 LastInterchange = j;
621 }
622 }
623 }
624}
625
626
627/*
628 BusLogic_InitializeMultiMasterProbeInfo initializes the list of I/O Address
629 and Bus Probe Information to be checked for potential BusLogic MultiMaster
630 SCSI Host Adapters by interrogating the PCI Configuration Space on PCI
631 machines as well as from the list of standard BusLogic MultiMaster ISA
632 I/O Addresses. It returns the number of PCI MultiMaster Host Adapters found.
633*/
634
635static int __init BusLogic_InitializeMultiMasterProbeInfo(struct BusLogic_HostAdapter
636 *PrototypeHostAdapter)
637{
638 struct BusLogic_ProbeInfo *PrimaryProbeInfo = &BusLogic_ProbeInfoList[BusLogic_ProbeInfoCount];
639 int NonPrimaryPCIMultiMasterIndex = BusLogic_ProbeInfoCount + 1;
640 int NonPrimaryPCIMultiMasterCount = 0, PCIMultiMasterCount = 0;
641 boolean ForceBusDeviceScanningOrder = false;
642 boolean ForceBusDeviceScanningOrderChecked = false;
643 boolean StandardAddressSeen[6];
644 struct pci_dev *PCI_Device = NULL;
645 int i;
646 if (BusLogic_ProbeInfoCount >= BusLogic_MaxHostAdapters)
647 return 0;
648 BusLogic_ProbeInfoCount++;
649 for (i = 0; i < 6; i++)
650 StandardAddressSeen[i] = false;
651 /*
652 Iterate over the MultiMaster PCI Host Adapters. For each enumerated host
653 adapter, determine whether its ISA Compatible I/O Port is enabled and if
654 so, whether it is assigned the Primary I/O Address. A host adapter that is
655 assigned the Primary I/O Address will always be the preferred boot device.
656 The MultiMaster BIOS will first recognize a host adapter at the Primary I/O
657 Address, then any other PCI host adapters, and finally any host adapters
658 located at the remaining standard ISA I/O Addresses. When a PCI host
659 adapter is found with its ISA Compatible I/O Port enabled, a command is
660 issued to disable the ISA Compatible I/O Port, and it is noted that the
661 particular standard ISA I/O Address need not be probed.
662 */
663 PrimaryProbeInfo->IO_Address = 0;
664 while ((PCI_Device = pci_find_device(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER, PCI_Device)) != NULL) {
665 struct BusLogic_HostAdapter *HostAdapter = PrototypeHostAdapter;
666 struct BusLogic_PCIHostAdapterInformation PCIHostAdapterInformation;
667 enum BusLogic_ISACompatibleIOPort ModifyIOAddressRequest;
668 unsigned char Bus;
669 unsigned char Device;
670 unsigned int IRQ_Channel;
671 unsigned long BaseAddress0;
672 unsigned long BaseAddress1;
673 unsigned long IO_Address;
674 unsigned long PCI_Address;
675
676 if (pci_enable_device(PCI_Device))
677 continue;
678
679 if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff))
680 continue;
681
682 Bus = PCI_Device->bus->number;
683 Device = PCI_Device->devfn >> 3;
684 IRQ_Channel = PCI_Device->irq;
685 IO_Address = BaseAddress0 = pci_resource_start(PCI_Device, 0);
686 PCI_Address = BaseAddress1 = pci_resource_start(PCI_Device, 1);
687
688 if (pci_resource_flags(PCI_Device, 0) & IORESOURCE_MEM) {
689 BusLogic_Error("BusLogic: Base Address0 0x%X not I/O for " "MultiMaster Host Adapter\n", NULL, BaseAddress0);
690 BusLogic_Error("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, Bus, Device, IO_Address);
691 continue;
692 }
693 if (pci_resource_flags(PCI_Device, 1) & IORESOURCE_IO) {
694 BusLogic_Error("BusLogic: Base Address1 0x%X not Memory for " "MultiMaster Host Adapter\n", NULL, BaseAddress1);
695 BusLogic_Error("at PCI Bus %d Device %d PCI Address 0x%X\n", NULL, Bus, Device, PCI_Address);
696 continue;
697 }
698 if (IRQ_Channel == 0) {
699 BusLogic_Error("BusLogic: IRQ Channel %d invalid for " "MultiMaster Host Adapter\n", NULL, IRQ_Channel);
700 BusLogic_Error("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, Bus, Device, IO_Address);
701 continue;
702 }
703 if (BusLogic_GlobalOptions.TraceProbe) {
704 BusLogic_Notice("BusLogic: PCI MultiMaster Host Adapter " "detected at\n", NULL);
705 BusLogic_Notice("BusLogic: PCI Bus %d Device %d I/O Address " "0x%X PCI Address 0x%X\n", NULL, Bus, Device, IO_Address, PCI_Address);
706 }
707 /*
708 Issue the Inquire PCI Host Adapter Information command to determine
709 the ISA Compatible I/O Port. If the ISA Compatible I/O Port is
710 known and enabled, note that the particular Standard ISA I/O
711 Address should not be probed.
712 */
713 HostAdapter->IO_Address = IO_Address;
714 BusLogic_InterruptReset(HostAdapter);
715 if (BusLogic_Command(HostAdapter, BusLogic_InquirePCIHostAdapterInformation, NULL, 0, &PCIHostAdapterInformation, sizeof(PCIHostAdapterInformation))
716 == sizeof(PCIHostAdapterInformation)) {
717 if (PCIHostAdapterInformation.ISACompatibleIOPort < 6)
718 StandardAddressSeen[PCIHostAdapterInformation.ISACompatibleIOPort] = true;
719 } else
720 PCIHostAdapterInformation.ISACompatibleIOPort = BusLogic_IO_Disable;
721 /*
722 * Issue the Modify I/O Address command to disable the ISA Compatible
723 * I/O Port. On PCI Host Adapters, the Modify I/O Address command
724 * allows modification of the ISA compatible I/O Address that the Host
725 * Adapter responds to; it does not affect the PCI compliant I/O Address
726 * assigned at system initialization.
727 */
728 ModifyIOAddressRequest = BusLogic_IO_Disable;
729 BusLogic_Command(HostAdapter, BusLogic_ModifyIOAddress, &ModifyIOAddressRequest, sizeof(ModifyIOAddressRequest), NULL, 0);
730 /*
731 For the first MultiMaster Host Adapter enumerated, issue the Fetch
732 Host Adapter Local RAM command to read byte 45 of the AutoSCSI area,
733 for the setting of the "Use Bus And Device # For PCI Scanning Seq."
734 option. Issue the Inquire Board ID command since this option is
735 only valid for the BT-948/958/958D.
736 */
737 if (!ForceBusDeviceScanningOrderChecked) {
738 struct BusLogic_FetchHostAdapterLocalRAMRequest FetchHostAdapterLocalRAMRequest;
739 struct BusLogic_AutoSCSIByte45 AutoSCSIByte45;
740 struct BusLogic_BoardID BoardID;
741 FetchHostAdapterLocalRAMRequest.ByteOffset = BusLogic_AutoSCSI_BaseOffset + 45;
742 FetchHostAdapterLocalRAMRequest.ByteCount = sizeof(AutoSCSIByte45);
743 BusLogic_Command(HostAdapter, BusLogic_FetchHostAdapterLocalRAM, &FetchHostAdapterLocalRAMRequest, sizeof(FetchHostAdapterLocalRAMRequest), &AutoSCSIByte45, sizeof(AutoSCSIByte45));
744 BusLogic_Command(HostAdapter, BusLogic_InquireBoardID, NULL, 0, &BoardID, sizeof(BoardID));
745 if (BoardID.FirmwareVersion1stDigit == '5')
746 ForceBusDeviceScanningOrder = AutoSCSIByte45.ForceBusDeviceScanningOrder;
747 ForceBusDeviceScanningOrderChecked = true;
748 }
749 /*
750 Determine whether this MultiMaster Host Adapter has its ISA
751 Compatible I/O Port enabled and is assigned the Primary I/O Address.
752 If it does, then it is the Primary MultiMaster Host Adapter and must
753 be recognized first. If it does not, then it is added to the list
754 for probing after any Primary MultiMaster Host Adapter is probed.
755 */
756 if (PCIHostAdapterInformation.ISACompatibleIOPort == BusLogic_IO_330) {
757 PrimaryProbeInfo->HostAdapterType = BusLogic_MultiMaster;
758 PrimaryProbeInfo->HostAdapterBusType = BusLogic_PCI_Bus;
759 PrimaryProbeInfo->IO_Address = IO_Address;
760 PrimaryProbeInfo->PCI_Address = PCI_Address;
761 PrimaryProbeInfo->Bus = Bus;
762 PrimaryProbeInfo->Device = Device;
763 PrimaryProbeInfo->IRQ_Channel = IRQ_Channel;
764 PrimaryProbeInfo->PCI_Device = PCI_Device;
765 PCIMultiMasterCount++;
766 } else if (BusLogic_ProbeInfoCount < BusLogic_MaxHostAdapters) {
767 struct BusLogic_ProbeInfo *ProbeInfo = &BusLogic_ProbeInfoList[BusLogic_ProbeInfoCount++];
768 ProbeInfo->HostAdapterType = BusLogic_MultiMaster;
769 ProbeInfo->HostAdapterBusType = BusLogic_PCI_Bus;
770 ProbeInfo->IO_Address = IO_Address;
771 ProbeInfo->PCI_Address = PCI_Address;
772 ProbeInfo->Bus = Bus;
773 ProbeInfo->Device = Device;
774 ProbeInfo->IRQ_Channel = IRQ_Channel;
775 ProbeInfo->PCI_Device = PCI_Device;
776 NonPrimaryPCIMultiMasterCount++;
777 PCIMultiMasterCount++;
778 } else
779 BusLogic_Warning("BusLogic: Too many Host Adapters " "detected\n", NULL);
780 }
781 /*
782 If the AutoSCSI "Use Bus And Device # For PCI Scanning Seq." option is ON
783 for the first enumerated MultiMaster Host Adapter, and if that host adapter
784 is a BT-948/958/958D, then the MultiMaster BIOS will recognize MultiMaster
785 Host Adapters in the order of increasing PCI Bus and Device Number. In
786 that case, sort the probe information into the same order the BIOS uses.
787 If this option is OFF, then the MultiMaster BIOS will recognize MultiMaster
788 Host Adapters in the order they are enumerated by the PCI BIOS, and hence
789 no sorting is necessary.
790 */
791 if (ForceBusDeviceScanningOrder)
792 BusLogic_SortProbeInfo(&BusLogic_ProbeInfoList[NonPrimaryPCIMultiMasterIndex], NonPrimaryPCIMultiMasterCount);
793 /*
794 If no PCI MultiMaster Host Adapter is assigned the Primary I/O Address,
795 then the Primary I/O Address must be probed explicitly before any PCI
796 host adapters are probed.
797 */
798 if (!BusLogic_ProbeOptions.NoProbeISA)
799 if (PrimaryProbeInfo->IO_Address == 0 && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe330 : check_region(0x330, BusLogic_MultiMasterAddressCount) == 0)) {
800 PrimaryProbeInfo->HostAdapterType = BusLogic_MultiMaster;
801 PrimaryProbeInfo->HostAdapterBusType = BusLogic_ISA_Bus;
802 PrimaryProbeInfo->IO_Address = 0x330;
803 }
804 /*
805 Append the list of standard BusLogic MultiMaster ISA I/O Addresses,
806 omitting the Primary I/O Address which has already been handled.
807 */
808 if (!BusLogic_ProbeOptions.NoProbeISA) {
809 if (!StandardAddressSeen[1] && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe334 : check_region(0x334, BusLogic_MultiMasterAddressCount) == 0))
810 BusLogic_AppendProbeAddressISA(0x334);
811 if (!StandardAddressSeen[2] && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe230 : check_region(0x230, BusLogic_MultiMasterAddressCount) == 0))
812 BusLogic_AppendProbeAddressISA(0x230);
813 if (!StandardAddressSeen[3] && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe234 : check_region(0x234, BusLogic_MultiMasterAddressCount) == 0))
814 BusLogic_AppendProbeAddressISA(0x234);
815 if (!StandardAddressSeen[4] && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe130 : check_region(0x130, BusLogic_MultiMasterAddressCount) == 0))
816 BusLogic_AppendProbeAddressISA(0x130);
817 if (!StandardAddressSeen[5] && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe134 : check_region(0x134, BusLogic_MultiMasterAddressCount) == 0))
818 BusLogic_AppendProbeAddressISA(0x134);
819 }
820 /*
821 Iterate over the older non-compliant MultiMaster PCI Host Adapters,
822 noting the PCI bus location and assigned IRQ Channel.
823 */
824 PCI_Device = NULL;
825 while ((PCI_Device = pci_find_device(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC, PCI_Device)) != NULL) {
826 unsigned char Bus;
827 unsigned char Device;
828 unsigned int IRQ_Channel;
829 unsigned long IO_Address;
830
831 if (pci_enable_device(PCI_Device))
832 continue;
833
834 if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff))
835 continue;
836
837 Bus = PCI_Device->bus->number;
838 Device = PCI_Device->devfn >> 3;
839 IRQ_Channel = PCI_Device->irq;
840 IO_Address = pci_resource_start(PCI_Device, 0);
841
842 if (IO_Address == 0 || IRQ_Channel == 0)
843 continue;
844 for (i = 0; i < BusLogic_ProbeInfoCount; i++) {
845 struct BusLogic_ProbeInfo *ProbeInfo = &BusLogic_ProbeInfoList[i];
846 if (ProbeInfo->IO_Address == IO_Address && ProbeInfo->HostAdapterType == BusLogic_MultiMaster) {
847 ProbeInfo->HostAdapterBusType = BusLogic_PCI_Bus;
848 ProbeInfo->PCI_Address = 0;
849 ProbeInfo->Bus = Bus;
850 ProbeInfo->Device = Device;
851 ProbeInfo->IRQ_Channel = IRQ_Channel;
852 ProbeInfo->PCI_Device = PCI_Device;
853 break;
854 }
855 }
856 }
857 return PCIMultiMasterCount;
858}
859
860
861/*
862 BusLogic_InitializeFlashPointProbeInfo initializes the list of I/O Address
863 and Bus Probe Information to be checked for potential BusLogic FlashPoint
864 Host Adapters by interrogating the PCI Configuration Space. It returns the
865 number of FlashPoint Host Adapters found.
866*/
867
868static int __init BusLogic_InitializeFlashPointProbeInfo(struct BusLogic_HostAdapter
869 *PrototypeHostAdapter)
870{
871 int FlashPointIndex = BusLogic_ProbeInfoCount, FlashPointCount = 0;
872 struct pci_dev *PCI_Device = NULL;
873 /*
874 Interrogate PCI Configuration Space for any FlashPoint Host Adapters.
875 */
876 while ((PCI_Device = pci_find_device(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT, PCI_Device)) != NULL) {
877 unsigned char Bus;
878 unsigned char Device;
879 unsigned int IRQ_Channel;
880 unsigned long BaseAddress0;
881 unsigned long BaseAddress1;
882 unsigned long IO_Address;
883 unsigned long PCI_Address;
884
885 if (pci_enable_device(PCI_Device))
886 continue;
887
888 if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff))
889 continue;
890
891 Bus = PCI_Device->bus->number;
892 Device = PCI_Device->devfn >> 3;
893 IRQ_Channel = PCI_Device->irq;
894 IO_Address = BaseAddress0 = pci_resource_start(PCI_Device, 0);
895 PCI_Address = BaseAddress1 = pci_resource_start(PCI_Device, 1);
896#ifndef CONFIG_SCSI_OMIT_FLASHPOINT
897 if (pci_resource_flags(PCI_Device, 0) & IORESOURCE_MEM) {
898 BusLogic_Error("BusLogic: Base Address0 0x%X not I/O for " "FlashPoint Host Adapter\n", NULL, BaseAddress0);
899 BusLogic_Error("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, Bus, Device, IO_Address);
900 continue;
901 }
902 if (pci_resource_flags(PCI_Device, 1) & IORESOURCE_IO) {
903 BusLogic_Error("BusLogic: Base Address1 0x%X not Memory for " "FlashPoint Host Adapter\n", NULL, BaseAddress1);
904 BusLogic_Error("at PCI Bus %d Device %d PCI Address 0x%X\n", NULL, Bus, Device, PCI_Address);
905 continue;
906 }
907 if (IRQ_Channel == 0) {
908 BusLogic_Error("BusLogic: IRQ Channel %d invalid for " "FlashPoint Host Adapter\n", NULL, IRQ_Channel);
909 BusLogic_Error("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, Bus, Device, IO_Address);
910 continue;
911 }
912 if (BusLogic_GlobalOptions.TraceProbe) {
913 BusLogic_Notice("BusLogic: FlashPoint Host Adapter " "detected at\n", NULL);
914 BusLogic_Notice("BusLogic: PCI Bus %d Device %d I/O Address " "0x%X PCI Address 0x%X\n", NULL, Bus, Device, IO_Address, PCI_Address);
915 }
916 if (BusLogic_ProbeInfoCount < BusLogic_MaxHostAdapters) {
917 struct BusLogic_ProbeInfo *ProbeInfo = &BusLogic_ProbeInfoList[BusLogic_ProbeInfoCount++];
918 ProbeInfo->HostAdapterType = BusLogic_FlashPoint;
919 ProbeInfo->HostAdapterBusType = BusLogic_PCI_Bus;
920 ProbeInfo->IO_Address = IO_Address;
921 ProbeInfo->PCI_Address = PCI_Address;
922 ProbeInfo->Bus = Bus;
923 ProbeInfo->Device = Device;
924 ProbeInfo->IRQ_Channel = IRQ_Channel;
925 ProbeInfo->PCI_Device = PCI_Device;
926 FlashPointCount++;
927 } else
928 BusLogic_Warning("BusLogic: Too many Host Adapters " "detected\n", NULL);
929#else
930 BusLogic_Error("BusLogic: FlashPoint Host Adapter detected at " "PCI Bus %d Device %d\n", NULL, Bus, Device);
931 BusLogic_Error("BusLogic: I/O Address 0x%X PCI Address 0x%X, irq %d, " "but FlashPoint\n", NULL, IO_Address, PCI_Address, IRQ_Channel);
932 BusLogic_Error("BusLogic: support was omitted in this kernel " "configuration.\n", NULL);
933#endif
934 }
935 /*
936 The FlashPoint BIOS will scan for FlashPoint Host Adapters in the order of
937 increasing PCI Bus and Device Number, so sort the probe information into
938 the same order the BIOS uses.
939 */
940 BusLogic_SortProbeInfo(&BusLogic_ProbeInfoList[FlashPointIndex], FlashPointCount);
941 return FlashPointCount;
942}
943
944
945/*
946 BusLogic_InitializeProbeInfoList initializes the list of I/O Address and Bus
947 Probe Information to be checked for potential BusLogic SCSI Host Adapters by
948 interrogating the PCI Configuration Space on PCI machines as well as from the
949 list of standard BusLogic MultiMaster ISA I/O Addresses. By default, if both
950 FlashPoint and PCI MultiMaster Host Adapters are present, this driver will
951 probe for FlashPoint Host Adapters first unless the BIOS primary disk is
952 controlled by the first PCI MultiMaster Host Adapter, in which case
953 MultiMaster Host Adapters will be probed first. The BusLogic Driver Options
954 specifications "MultiMasterFirst" and "FlashPointFirst" can be used to force
955 a particular probe order.
956*/
957
958static void __init BusLogic_InitializeProbeInfoList(struct BusLogic_HostAdapter
959 *PrototypeHostAdapter)
960{
961 /*
962 If a PCI BIOS is present, interrogate it for MultiMaster and FlashPoint
963 Host Adapters; otherwise, default to the standard ISA MultiMaster probe.
964 */
965 if (!BusLogic_ProbeOptions.NoProbePCI) {
966 if (BusLogic_ProbeOptions.MultiMasterFirst) {
967 BusLogic_InitializeMultiMasterProbeInfo(PrototypeHostAdapter);
968 BusLogic_InitializeFlashPointProbeInfo(PrototypeHostAdapter);
969 } else if (BusLogic_ProbeOptions.FlashPointFirst) {
970 BusLogic_InitializeFlashPointProbeInfo(PrototypeHostAdapter);
971 BusLogic_InitializeMultiMasterProbeInfo(PrototypeHostAdapter);
972 } else {
973 int FlashPointCount = BusLogic_InitializeFlashPointProbeInfo(PrototypeHostAdapter);
974 int PCIMultiMasterCount = BusLogic_InitializeMultiMasterProbeInfo(PrototypeHostAdapter);
975 if (FlashPointCount > 0 && PCIMultiMasterCount > 0) {
976 struct BusLogic_ProbeInfo *ProbeInfo = &BusLogic_ProbeInfoList[FlashPointCount];
977 struct BusLogic_HostAdapter *HostAdapter = PrototypeHostAdapter;
978 struct BusLogic_FetchHostAdapterLocalRAMRequest FetchHostAdapterLocalRAMRequest;
979 struct BusLogic_BIOSDriveMapByte Drive0MapByte;
980 while (ProbeInfo->HostAdapterBusType != BusLogic_PCI_Bus)
981 ProbeInfo++;
982 HostAdapter->IO_Address = ProbeInfo->IO_Address;
983 FetchHostAdapterLocalRAMRequest.ByteOffset = BusLogic_BIOS_BaseOffset + BusLogic_BIOS_DriveMapOffset + 0;
984 FetchHostAdapterLocalRAMRequest.ByteCount = sizeof(Drive0MapByte);
985 BusLogic_Command(HostAdapter, BusLogic_FetchHostAdapterLocalRAM, &FetchHostAdapterLocalRAMRequest, sizeof(FetchHostAdapterLocalRAMRequest), &Drive0MapByte, sizeof(Drive0MapByte));
986 /*
987 If the Map Byte for BIOS Drive 0 indicates that BIOS Drive 0
988 is controlled by this PCI MultiMaster Host Adapter, then
989 reverse the probe order so that MultiMaster Host Adapters are
990 probed before FlashPoint Host Adapters.
991 */
992 if (Drive0MapByte.DiskGeometry != BusLogic_BIOS_Disk_Not_Installed) {
993 struct BusLogic_ProbeInfo SavedProbeInfo[BusLogic_MaxHostAdapters];
994 int MultiMasterCount = BusLogic_ProbeInfoCount - FlashPointCount;
995 memcpy(SavedProbeInfo, BusLogic_ProbeInfoList, BusLogic_ProbeInfoCount * sizeof(struct BusLogic_ProbeInfo));
996 memcpy(&BusLogic_ProbeInfoList[0], &SavedProbeInfo[FlashPointCount], MultiMasterCount * sizeof(struct BusLogic_ProbeInfo));
997 memcpy(&BusLogic_ProbeInfoList[MultiMasterCount], &SavedProbeInfo[0], FlashPointCount * sizeof(struct BusLogic_ProbeInfo));
998 }
999 }
1000 }
1001 } else
1002 BusLogic_InitializeProbeInfoListISA(PrototypeHostAdapter);
1003}
1004
1005
1006#endif /* CONFIG_PCI */
1007
1008
1009/*
1010 BusLogic_Failure prints a standardized error message, and then returns false.
1011*/
1012
1013static boolean BusLogic_Failure(struct BusLogic_HostAdapter *HostAdapter, char *ErrorMessage)
1014{
1015 BusLogic_AnnounceDriver(HostAdapter);
1016 if (HostAdapter->HostAdapterBusType == BusLogic_PCI_Bus) {
1017 BusLogic_Error("While configuring BusLogic PCI Host Adapter at\n", HostAdapter);
1018 BusLogic_Error("Bus %d Device %d I/O Address 0x%X PCI Address 0x%X:\n", HostAdapter, HostAdapter->Bus, HostAdapter->Device, HostAdapter->IO_Address, HostAdapter->PCI_Address);
1019 } else
1020 BusLogic_Error("While configuring BusLogic Host Adapter at " "I/O Address 0x%X:\n", HostAdapter, HostAdapter->IO_Address);
1021 BusLogic_Error("%s FAILED - DETACHING\n", HostAdapter, ErrorMessage);
1022 if (BusLogic_CommandFailureReason != NULL)
1023 BusLogic_Error("ADDITIONAL FAILURE INFO - %s\n", HostAdapter, BusLogic_CommandFailureReason);
1024 return false;
1025}
1026
1027
1028/*
1029 BusLogic_ProbeHostAdapter probes for a BusLogic Host Adapter.
1030*/
1031
1032static boolean __init BusLogic_ProbeHostAdapter(struct BusLogic_HostAdapter *HostAdapter)
1033{
1034 union BusLogic_StatusRegister StatusRegister;
1035 union BusLogic_InterruptRegister InterruptRegister;
1036 union BusLogic_GeometryRegister GeometryRegister;
1037 /*
1038 FlashPoint Host Adapters are Probed by the FlashPoint SCCB Manager.
1039 */
1040 if (BusLogic_FlashPointHostAdapterP(HostAdapter)) {
1041 struct FlashPoint_Info *FlashPointInfo = &HostAdapter->FlashPointInfo;
1042 FlashPointInfo->BaseAddress = (u32) HostAdapter->IO_Address;
1043 FlashPointInfo->IRQ_Channel = HostAdapter->IRQ_Channel;
1044 FlashPointInfo->Present = false;
1045 if (!(FlashPoint_ProbeHostAdapter(FlashPointInfo) == 0 && FlashPointInfo->Present)) {
1046 BusLogic_Error("BusLogic: FlashPoint Host Adapter detected at " "PCI Bus %d Device %d\n", HostAdapter, HostAdapter->Bus, HostAdapter->Device);
1047 BusLogic_Error("BusLogic: I/O Address 0x%X PCI Address 0x%X, " "but FlashPoint\n", HostAdapter, HostAdapter->IO_Address, HostAdapter->PCI_Address);
1048 BusLogic_Error("BusLogic: Probe Function failed to validate it.\n", HostAdapter);
1049 return false;
1050 }
1051 if (BusLogic_GlobalOptions.TraceProbe)
1052 BusLogic_Notice("BusLogic_Probe(0x%X): FlashPoint Found\n", HostAdapter, HostAdapter->IO_Address);
1053 /*
1054 Indicate the Host Adapter Probe completed successfully.
1055 */
1056 return true;
1057 }
1058 /*
1059 Read the Status, Interrupt, and Geometry Registers to test if there are I/O
1060 ports that respond, and to check the values to determine if they are from a
1061 BusLogic Host Adapter. A nonexistent I/O port will return 0xFF, in which
1062 case there is definitely no BusLogic Host Adapter at this base I/O Address.
1063 The test here is a subset of that used by the BusLogic Host Adapter BIOS.
1064 */
1065 StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
1066 InterruptRegister.All = BusLogic_ReadInterruptRegister(HostAdapter);
1067 GeometryRegister.All = BusLogic_ReadGeometryRegister(HostAdapter);
1068 if (BusLogic_GlobalOptions.TraceProbe)
1069 BusLogic_Notice("BusLogic_Probe(0x%X): Status 0x%02X, Interrupt 0x%02X, " "Geometry 0x%02X\n", HostAdapter, HostAdapter->IO_Address, StatusRegister.All, InterruptRegister.All, GeometryRegister.All);
1070 if (StatusRegister.All == 0 || StatusRegister.sr.DiagnosticActive || StatusRegister.sr.CommandParameterRegisterBusy || StatusRegister.sr.Reserved || StatusRegister.sr.CommandInvalid || InterruptRegister.ir.Reserved != 0)
1071 return false;
1072 /*
1073 Check the undocumented Geometry Register to test if there is an I/O port
1074 that responded. Adaptec Host Adapters do not implement the Geometry
1075 Register, so this test helps serve to avoid incorrectly recognizing an
1076 Adaptec 1542A or 1542B as a BusLogic. Unfortunately, the Adaptec 1542C
1077 series does respond to the Geometry Register I/O port, but it will be
1078 rejected later when the Inquire Extended Setup Information command is
1079 issued in BusLogic_CheckHostAdapter. The AMI FastDisk Host Adapter is a
1080 BusLogic clone that implements the same interface as earlier BusLogic
1081 Host Adapters, including the undocumented commands, and is therefore
1082 supported by this driver. However, the AMI FastDisk always returns 0x00
1083 upon reading the Geometry Register, so the extended translation option
1084 should always be left disabled on the AMI FastDisk.
1085 */
1086 if (GeometryRegister.All == 0xFF)
1087 return false;
1088 /*
1089 Indicate the Host Adapter Probe completed successfully.
1090 */
1091 return true;
1092}
1093
1094
1095/*
1096 BusLogic_HardwareResetHostAdapter issues a Hardware Reset to the Host Adapter
1097 and waits for Host Adapter Diagnostics to complete. If HardReset is true, a
1098 Hard Reset is performed which also initiates a SCSI Bus Reset. Otherwise, a
1099 Soft Reset is performed which only resets the Host Adapter without forcing a
1100 SCSI Bus Reset.
1101*/
1102
1103static boolean BusLogic_HardwareResetHostAdapter(struct BusLogic_HostAdapter
1104 *HostAdapter, boolean HardReset)
1105{
1106 union BusLogic_StatusRegister StatusRegister;
1107 int TimeoutCounter;
1108 /*
1109 FlashPoint Host Adapters are Hard Reset by the FlashPoint SCCB Manager.
1110 */
1111 if (BusLogic_FlashPointHostAdapterP(HostAdapter)) {
1112 struct FlashPoint_Info *FlashPointInfo = &HostAdapter->FlashPointInfo;
1113 FlashPointInfo->HostSoftReset = !HardReset;
1114 FlashPointInfo->ReportDataUnderrun = true;
1115 HostAdapter->CardHandle = FlashPoint_HardwareResetHostAdapter(FlashPointInfo);
1116 if (HostAdapter->CardHandle == FlashPoint_BadCardHandle)
1117 return false;
1118 /*
1119 Indicate the Host Adapter Hard Reset completed successfully.
1120 */
1121 return true;
1122 }
1123 /*
1124 Issue a Hard Reset or Soft Reset Command to the Host Adapter. The Host
1125 Adapter should respond by setting Diagnostic Active in the Status Register.
1126 */
1127 if (HardReset)
1128 BusLogic_HardReset(HostAdapter);
1129 else
1130 BusLogic_SoftReset(HostAdapter);
1131 /*
1132 Wait until Diagnostic Active is set in the Status Register.
1133 */
1134 TimeoutCounter = 5 * 10000;
1135 while (--TimeoutCounter >= 0) {
1136 StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
1137 if (StatusRegister.sr.DiagnosticActive)
1138 break;
1139 udelay(100);
1140 }
1141 if (BusLogic_GlobalOptions.TraceHardwareReset)
1142 BusLogic_Notice("BusLogic_HardwareReset(0x%X): Diagnostic Active, " "Status 0x%02X\n", HostAdapter, HostAdapter->IO_Address, StatusRegister.All);
1143 if (TimeoutCounter < 0)
1144 return false;
1145 /*
1146 Wait 100 microseconds to allow completion of any initial diagnostic
1147 activity which might leave the contents of the Status Register
1148 unpredictable.
1149 */
1150 udelay(100);
1151 /*
1152 Wait until Diagnostic Active is reset in the Status Register.
1153 */
1154 TimeoutCounter = 10 * 10000;
1155 while (--TimeoutCounter >= 0) {
1156 StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
1157 if (!StatusRegister.sr.DiagnosticActive)
1158 break;
1159 udelay(100);
1160 }
1161 if (BusLogic_GlobalOptions.TraceHardwareReset)
1162 BusLogic_Notice("BusLogic_HardwareReset(0x%X): Diagnostic Completed, " "Status 0x%02X\n", HostAdapter, HostAdapter->IO_Address, StatusRegister.All);
1163 if (TimeoutCounter < 0)
1164 return false;
1165 /*
1166 Wait until at least one of the Diagnostic Failure, Host Adapter Ready,
1167 or Data In Register Ready bits is set in the Status Register.
1168 */
1169 TimeoutCounter = 10000;
1170 while (--TimeoutCounter >= 0) {
1171 StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
1172 if (StatusRegister.sr.DiagnosticFailure || StatusRegister.sr.HostAdapterReady || StatusRegister.sr.DataInRegisterReady)
1173 break;
1174 udelay(100);
1175 }
1176 if (BusLogic_GlobalOptions.TraceHardwareReset)
1177 BusLogic_Notice("BusLogic_HardwareReset(0x%X): Host Adapter Ready, " "Status 0x%02X\n", HostAdapter, HostAdapter->IO_Address, StatusRegister.All);
1178 if (TimeoutCounter < 0)
1179 return false;
1180 /*
1181 If Diagnostic Failure is set or Host Adapter Ready is reset, then an
1182 error occurred during the Host Adapter diagnostics. If Data In Register
1183 Ready is set, then there is an Error Code available.
1184 */
1185 if (StatusRegister.sr.DiagnosticFailure || !StatusRegister.sr.HostAdapterReady) {
1186 BusLogic_CommandFailureReason = NULL;
1187 BusLogic_Failure(HostAdapter, "HARD RESET DIAGNOSTICS");
1188 BusLogic_Error("HOST ADAPTER STATUS REGISTER = %02X\n", HostAdapter, StatusRegister.All);
1189 if (StatusRegister.sr.DataInRegisterReady) {
1190 unsigned char ErrorCode = BusLogic_ReadDataInRegister(HostAdapter);
1191 BusLogic_Error("HOST ADAPTER ERROR CODE = %d\n", HostAdapter, ErrorCode);
1192 }
1193 return false;
1194 }
1195 /*
1196 Indicate the Host Adapter Hard Reset completed successfully.
1197 */
1198 return true;
1199}
1200
1201
1202/*
1203 BusLogic_CheckHostAdapter checks to be sure this really is a BusLogic
1204 Host Adapter.
1205*/
1206
1207static boolean __init BusLogic_CheckHostAdapter(struct BusLogic_HostAdapter *HostAdapter)
1208{
1209 struct BusLogic_ExtendedSetupInformation ExtendedSetupInformation;
1210 unsigned char RequestedReplyLength;
1211 boolean Result = true;
1212 /*
1213 FlashPoint Host Adapters do not require this protection.
1214 */
1215 if (BusLogic_FlashPointHostAdapterP(HostAdapter))
1216 return true;
1217 /*
1218 Issue the Inquire Extended Setup Information command. Only genuine
1219 BusLogic Host Adapters and true clones support this command. Adaptec 1542C
1220 series Host Adapters that respond to the Geometry Register I/O port will
1221 fail this command.
1222 */
1223 RequestedReplyLength = sizeof(ExtendedSetupInformation);
1224 if (BusLogic_Command(HostAdapter, BusLogic_InquireExtendedSetupInformation, &RequestedReplyLength, sizeof(RequestedReplyLength), &ExtendedSetupInformation, sizeof(ExtendedSetupInformation))
1225 != sizeof(ExtendedSetupInformation))
1226 Result = false;
1227 /*
1228 Provide tracing information if requested and return.
1229 */
1230 if (BusLogic_GlobalOptions.TraceProbe)
1231 BusLogic_Notice("BusLogic_Check(0x%X): MultiMaster %s\n", HostAdapter, HostAdapter->IO_Address, (Result ? "Found" : "Not Found"));
1232 return Result;
1233}
1234
1235
1236/*
1237 BusLogic_ReadHostAdapterConfiguration reads the Configuration Information
1238 from Host Adapter and initializes the Host Adapter structure.
1239*/
1240
1241static boolean __init BusLogic_ReadHostAdapterConfiguration(struct BusLogic_HostAdapter
1242 *HostAdapter)
1243{
1244 struct BusLogic_BoardID BoardID;
1245 struct BusLogic_Configuration Configuration;
1246 struct BusLogic_SetupInformation SetupInformation;
1247 struct BusLogic_ExtendedSetupInformation ExtendedSetupInformation;
1248 unsigned char HostAdapterModelNumber[5];
1249 unsigned char FirmwareVersion3rdDigit;
1250 unsigned char FirmwareVersionLetter;
1251 struct BusLogic_PCIHostAdapterInformation PCIHostAdapterInformation;
1252 struct BusLogic_FetchHostAdapterLocalRAMRequest FetchHostAdapterLocalRAMRequest;
1253 struct BusLogic_AutoSCSIData AutoSCSIData;
1254 union BusLogic_GeometryRegister GeometryRegister;
1255 unsigned char RequestedReplyLength;
1256 unsigned char *TargetPointer, Character;
1257 int TargetID, i;
1258 /*
1259 Configuration Information for FlashPoint Host Adapters is provided in the
1260 FlashPoint_Info structure by the FlashPoint SCCB Manager's Probe Function.
1261 Initialize fields in the Host Adapter structure from the FlashPoint_Info
1262 structure.
1263 */
1264 if (BusLogic_FlashPointHostAdapterP(HostAdapter)) {
1265 struct FlashPoint_Info *FlashPointInfo = &HostAdapter->FlashPointInfo;
1266 TargetPointer = HostAdapter->ModelName;
1267 *TargetPointer++ = 'B';
1268 *TargetPointer++ = 'T';
1269 *TargetPointer++ = '-';
1270 for (i = 0; i < sizeof(FlashPointInfo->ModelNumber); i++)
1271 *TargetPointer++ = FlashPointInfo->ModelNumber[i];
1272 *TargetPointer++ = '\0';
1273 strcpy(HostAdapter->FirmwareVersion, FlashPoint_FirmwareVersion);
1274 HostAdapter->SCSI_ID = FlashPointInfo->SCSI_ID;
1275 HostAdapter->ExtendedTranslationEnabled = FlashPointInfo->ExtendedTranslationEnabled;
1276 HostAdapter->ParityCheckingEnabled = FlashPointInfo->ParityCheckingEnabled;
1277 HostAdapter->BusResetEnabled = !FlashPointInfo->HostSoftReset;
1278 HostAdapter->LevelSensitiveInterrupt = true;
1279 HostAdapter->HostWideSCSI = FlashPointInfo->HostWideSCSI;
1280 HostAdapter->HostDifferentialSCSI = false;
1281 HostAdapter->HostSupportsSCAM = true;
1282 HostAdapter->HostUltraSCSI = true;
1283 HostAdapter->ExtendedLUNSupport = true;
1284 HostAdapter->TerminationInfoValid = true;
1285 HostAdapter->LowByteTerminated = FlashPointInfo->LowByteTerminated;
1286 HostAdapter->HighByteTerminated = FlashPointInfo->HighByteTerminated;
1287 HostAdapter->SCAM_Enabled = FlashPointInfo->SCAM_Enabled;
1288 HostAdapter->SCAM_Level2 = FlashPointInfo->SCAM_Level2;
1289 HostAdapter->DriverScatterGatherLimit = BusLogic_ScatterGatherLimit;
1290 HostAdapter->MaxTargetDevices = (HostAdapter->HostWideSCSI ? 16 : 8);
1291 HostAdapter->MaxLogicalUnits = 32;
1292 HostAdapter->InitialCCBs = 4 * BusLogic_CCB_AllocationGroupSize;
1293 HostAdapter->IncrementalCCBs = BusLogic_CCB_AllocationGroupSize;
1294 HostAdapter->DriverQueueDepth = 255;
1295 HostAdapter->HostAdapterQueueDepth = HostAdapter->DriverQueueDepth;
1296 HostAdapter->SynchronousPermitted = FlashPointInfo->SynchronousPermitted;
1297 HostAdapter->FastPermitted = FlashPointInfo->FastPermitted;
1298 HostAdapter->UltraPermitted = FlashPointInfo->UltraPermitted;
1299 HostAdapter->WidePermitted = FlashPointInfo->WidePermitted;
1300 HostAdapter->DisconnectPermitted = FlashPointInfo->DisconnectPermitted;
1301 HostAdapter->TaggedQueuingPermitted = 0xFFFF;
1302 goto Common;
1303 }
1304 /*
1305 Issue the Inquire Board ID command.
1306 */
1307 if (BusLogic_Command(HostAdapter, BusLogic_InquireBoardID, NULL, 0, &BoardID, sizeof(BoardID)) != sizeof(BoardID))
1308 return BusLogic_Failure(HostAdapter, "INQUIRE BOARD ID");
1309 /*
1310 Issue the Inquire Configuration command.
1311 */
1312 if (BusLogic_Command(HostAdapter, BusLogic_InquireConfiguration, NULL, 0, &Configuration, sizeof(Configuration))
1313 != sizeof(Configuration))
1314 return BusLogic_Failure(HostAdapter, "INQUIRE CONFIGURATION");
1315 /*
1316 Issue the Inquire Setup Information command.
1317 */
1318 RequestedReplyLength = sizeof(SetupInformation);
1319 if (BusLogic_Command(HostAdapter, BusLogic_InquireSetupInformation, &RequestedReplyLength, sizeof(RequestedReplyLength), &SetupInformation, sizeof(SetupInformation))
1320 != sizeof(SetupInformation))
1321 return BusLogic_Failure(HostAdapter, "INQUIRE SETUP INFORMATION");
1322 /*
1323 Issue the Inquire Extended Setup Information command.
1324 */
1325 RequestedReplyLength = sizeof(ExtendedSetupInformation);
1326 if (BusLogic_Command(HostAdapter, BusLogic_InquireExtendedSetupInformation, &RequestedReplyLength, sizeof(RequestedReplyLength), &ExtendedSetupInformation, sizeof(ExtendedSetupInformation))
1327 != sizeof(ExtendedSetupInformation))
1328 return BusLogic_Failure(HostAdapter, "INQUIRE EXTENDED SETUP INFORMATION");
1329 /*
1330 Issue the Inquire Firmware Version 3rd Digit command.
1331 */
1332 FirmwareVersion3rdDigit = '\0';
1333 if (BoardID.FirmwareVersion1stDigit > '0')
1334 if (BusLogic_Command(HostAdapter, BusLogic_InquireFirmwareVersion3rdDigit, NULL, 0, &FirmwareVersion3rdDigit, sizeof(FirmwareVersion3rdDigit))
1335 != sizeof(FirmwareVersion3rdDigit))
1336 return BusLogic_Failure(HostAdapter, "INQUIRE FIRMWARE 3RD DIGIT");
1337 /*
1338 Issue the Inquire Host Adapter Model Number command.
1339 */
1340 if (ExtendedSetupInformation.BusType == 'A' && BoardID.FirmwareVersion1stDigit == '2')
1341 /* BusLogic BT-542B ISA 2.xx */
1342 strcpy(HostAdapterModelNumber, "542B");
1343 else if (ExtendedSetupInformation.BusType == 'E' && BoardID.FirmwareVersion1stDigit == '2' && (BoardID.FirmwareVersion2ndDigit <= '1' || (BoardID.FirmwareVersion2ndDigit == '2' && FirmwareVersion3rdDigit == '0')))
1344 /* BusLogic BT-742A EISA 2.1x or 2.20 */
1345 strcpy(HostAdapterModelNumber, "742A");
1346 else if (ExtendedSetupInformation.BusType == 'E' && BoardID.FirmwareVersion1stDigit == '0')
1347 /* AMI FastDisk EISA Series 441 0.x */
1348 strcpy(HostAdapterModelNumber, "747A");
1349 else {
1350 RequestedReplyLength = sizeof(HostAdapterModelNumber);
1351 if (BusLogic_Command(HostAdapter, BusLogic_InquireHostAdapterModelNumber, &RequestedReplyLength, sizeof(RequestedReplyLength), &HostAdapterModelNumber, sizeof(HostAdapterModelNumber))
1352 != sizeof(HostAdapterModelNumber))
1353 return BusLogic_Failure(HostAdapter, "INQUIRE HOST ADAPTER MODEL NUMBER");
1354 }
1355 /*
1356 BusLogic MultiMaster Host Adapters can be identified by their model number
1357 and the major version number of their firmware as follows:
1358
1359 5.xx BusLogic "W" Series Host Adapters:
1360 BT-948/958/958D
1361 4.xx BusLogic "C" Series Host Adapters:
1362 BT-946C/956C/956CD/747C/757C/757CD/445C/545C/540CF
1363 3.xx BusLogic "S" Series Host Adapters:
1364 BT-747S/747D/757S/757D/445S/545S/542D
1365 BT-542B/742A (revision H)
1366 2.xx BusLogic "A" Series Host Adapters:
1367 BT-542B/742A (revision G and below)
1368 0.xx AMI FastDisk VLB/EISA BusLogic Clone Host Adapter
1369 */
1370 /*
1371 Save the Model Name and Host Adapter Name in the Host Adapter structure.
1372 */
1373 TargetPointer = HostAdapter->ModelName;
1374 *TargetPointer++ = 'B';
1375 *TargetPointer++ = 'T';
1376 *TargetPointer++ = '-';
1377 for (i = 0; i < sizeof(HostAdapterModelNumber); i++) {
1378 Character = HostAdapterModelNumber[i];
1379 if (Character == ' ' || Character == '\0')
1380 break;
1381 *TargetPointer++ = Character;
1382 }
1383 *TargetPointer++ = '\0';
1384 /*
1385 Save the Firmware Version in the Host Adapter structure.
1386 */
1387 TargetPointer = HostAdapter->FirmwareVersion;
1388 *TargetPointer++ = BoardID.FirmwareVersion1stDigit;
1389 *TargetPointer++ = '.';
1390 *TargetPointer++ = BoardID.FirmwareVersion2ndDigit;
1391 if (FirmwareVersion3rdDigit != ' ' && FirmwareVersion3rdDigit != '\0')
1392 *TargetPointer++ = FirmwareVersion3rdDigit;
1393 *TargetPointer = '\0';
1394 /*
1395 Issue the Inquire Firmware Version Letter command.
1396 */
1397 if (strcmp(HostAdapter->FirmwareVersion, "3.3") >= 0) {
1398 if (BusLogic_Command(HostAdapter, BusLogic_InquireFirmwareVersionLetter, NULL, 0, &FirmwareVersionLetter, sizeof(FirmwareVersionLetter))
1399 != sizeof(FirmwareVersionLetter))
1400 return BusLogic_Failure(HostAdapter, "INQUIRE FIRMWARE VERSION LETTER");
1401 if (FirmwareVersionLetter != ' ' && FirmwareVersionLetter != '\0')
1402 *TargetPointer++ = FirmwareVersionLetter;
1403 *TargetPointer = '\0';
1404 }
1405 /*
1406 Save the Host Adapter SCSI ID in the Host Adapter structure.
1407 */
1408 HostAdapter->SCSI_ID = Configuration.HostAdapterID;
1409 /*
1410 Determine the Bus Type and save it in the Host Adapter structure, determine
1411 and save the IRQ Channel if necessary, and determine and save the DMA
1412 Channel for ISA Host Adapters.
1413 */
1414 HostAdapter->HostAdapterBusType = BusLogic_HostAdapterBusTypes[HostAdapter->ModelName[3] - '4'];
1415 if (HostAdapter->IRQ_Channel == 0) {
1416 if (Configuration.IRQ_Channel9)
1417 HostAdapter->IRQ_Channel = 9;
1418 else if (Configuration.IRQ_Channel10)
1419 HostAdapter->IRQ_Channel = 10;
1420 else if (Configuration.IRQ_Channel11)
1421 HostAdapter->IRQ_Channel = 11;
1422 else if (Configuration.IRQ_Channel12)
1423 HostAdapter->IRQ_Channel = 12;
1424 else if (Configuration.IRQ_Channel14)
1425 HostAdapter->IRQ_Channel = 14;
1426 else if (Configuration.IRQ_Channel15)
1427 HostAdapter->IRQ_Channel = 15;
1428 }
1429 if (HostAdapter->HostAdapterBusType == BusLogic_ISA_Bus) {
1430 if (Configuration.DMA_Channel5)
1431 HostAdapter->DMA_Channel = 5;
1432 else if (Configuration.DMA_Channel6)
1433 HostAdapter->DMA_Channel = 6;
1434 else if (Configuration.DMA_Channel7)
1435 HostAdapter->DMA_Channel = 7;
1436 }
1437 /*
1438 Determine whether Extended Translation is enabled and save it in
1439 the Host Adapter structure.
1440 */
1441 GeometryRegister.All = BusLogic_ReadGeometryRegister(HostAdapter);
1442 HostAdapter->ExtendedTranslationEnabled = GeometryRegister.gr.ExtendedTranslationEnabled;
1443 /*
1444 Save the Scatter Gather Limits, Level Sensitive Interrupt flag, Wide
1445 SCSI flag, Differential SCSI flag, SCAM Supported flag, and
1446 Ultra SCSI flag in the Host Adapter structure.
1447 */
1448 HostAdapter->HostAdapterScatterGatherLimit = ExtendedSetupInformation.ScatterGatherLimit;
1449 HostAdapter->DriverScatterGatherLimit = HostAdapter->HostAdapterScatterGatherLimit;
1450 if (HostAdapter->HostAdapterScatterGatherLimit > BusLogic_ScatterGatherLimit)
1451 HostAdapter->DriverScatterGatherLimit = BusLogic_ScatterGatherLimit;
1452 if (ExtendedSetupInformation.Misc.LevelSensitiveInterrupt)
1453 HostAdapter->LevelSensitiveInterrupt = true;
1454 HostAdapter->HostWideSCSI = ExtendedSetupInformation.HostWideSCSI;
1455 HostAdapter->HostDifferentialSCSI = ExtendedSetupInformation.HostDifferentialSCSI;
1456 HostAdapter->HostSupportsSCAM = ExtendedSetupInformation.HostSupportsSCAM;
1457 HostAdapter->HostUltraSCSI = ExtendedSetupInformation.HostUltraSCSI;
1458 /*
1459 Determine whether Extended LUN Format CCBs are supported and save the
1460 information in the Host Adapter structure.
1461 */
1462 if (HostAdapter->FirmwareVersion[0] == '5' || (HostAdapter->FirmwareVersion[0] == '4' && HostAdapter->HostWideSCSI))
1463 HostAdapter->ExtendedLUNSupport = true;
1464 /*
1465 Issue the Inquire PCI Host Adapter Information command to read the
1466 Termination Information from "W" series MultiMaster Host Adapters.
1467 */
1468 if (HostAdapter->FirmwareVersion[0] == '5') {
1469 if (BusLogic_Command(HostAdapter, BusLogic_InquirePCIHostAdapterInformation, NULL, 0, &PCIHostAdapterInformation, sizeof(PCIHostAdapterInformation))
1470 != sizeof(PCIHostAdapterInformation))
1471 return BusLogic_Failure(HostAdapter, "INQUIRE PCI HOST ADAPTER INFORMATION");
1472 /*
1473 Save the Termination Information in the Host Adapter structure.
1474 */
1475 if (PCIHostAdapterInformation.GenericInfoValid) {
1476 HostAdapter->TerminationInfoValid = true;
1477 HostAdapter->LowByteTerminated = PCIHostAdapterInformation.LowByteTerminated;
1478 HostAdapter->HighByteTerminated = PCIHostAdapterInformation.HighByteTerminated;
1479 }
1480 }
1481 /*
1482 Issue the Fetch Host Adapter Local RAM command to read the AutoSCSI data
1483 from "W" and "C" series MultiMaster Host Adapters.
1484 */
1485 if (HostAdapter->FirmwareVersion[0] >= '4') {
1486 FetchHostAdapterLocalRAMRequest.ByteOffset = BusLogic_AutoSCSI_BaseOffset;
1487 FetchHostAdapterLocalRAMRequest.ByteCount = sizeof(AutoSCSIData);
1488 if (BusLogic_Command(HostAdapter, BusLogic_FetchHostAdapterLocalRAM, &FetchHostAdapterLocalRAMRequest, sizeof(FetchHostAdapterLocalRAMRequest), &AutoSCSIData, sizeof(AutoSCSIData))
1489 != sizeof(AutoSCSIData))
1490 return BusLogic_Failure(HostAdapter, "FETCH HOST ADAPTER LOCAL RAM");
1491 /*
1492 Save the Parity Checking Enabled, Bus Reset Enabled, and Termination
1493 Information in the Host Adapter structure.
1494 */
1495 HostAdapter->ParityCheckingEnabled = AutoSCSIData.ParityCheckingEnabled;
1496 HostAdapter->BusResetEnabled = AutoSCSIData.BusResetEnabled;
1497 if (HostAdapter->FirmwareVersion[0] == '4') {
1498 HostAdapter->TerminationInfoValid = true;
1499 HostAdapter->LowByteTerminated = AutoSCSIData.LowByteTerminated;
1500 HostAdapter->HighByteTerminated = AutoSCSIData.HighByteTerminated;
1501 }
1502 /*
1503 Save the Wide Permitted, Fast Permitted, Synchronous Permitted,
1504 Disconnect Permitted, Ultra Permitted, and SCAM Information in the
1505 Host Adapter structure.
1506 */
1507 HostAdapter->WidePermitted = AutoSCSIData.WidePermitted;
1508 HostAdapter->FastPermitted = AutoSCSIData.FastPermitted;
1509 HostAdapter->SynchronousPermitted = AutoSCSIData.SynchronousPermitted;
1510 HostAdapter->DisconnectPermitted = AutoSCSIData.DisconnectPermitted;
1511 if (HostAdapter->HostUltraSCSI)
1512 HostAdapter->UltraPermitted = AutoSCSIData.UltraPermitted;
1513 if (HostAdapter->HostSupportsSCAM) {
1514 HostAdapter->SCAM_Enabled = AutoSCSIData.SCAM_Enabled;
1515 HostAdapter->SCAM_Level2 = AutoSCSIData.SCAM_Level2;
1516 }
1517 }
1518 /*
1519 Initialize fields in the Host Adapter structure for "S" and "A" series
1520 MultiMaster Host Adapters.
1521 */
1522 if (HostAdapter->FirmwareVersion[0] < '4') {
1523 if (SetupInformation.SynchronousInitiationEnabled) {
1524 HostAdapter->SynchronousPermitted = 0xFF;
1525 if (HostAdapter->HostAdapterBusType == BusLogic_EISA_Bus) {
1526 if (ExtendedSetupInformation.Misc.FastOnEISA)
1527 HostAdapter->FastPermitted = 0xFF;
1528 if (strcmp(HostAdapter->ModelName, "BT-757") == 0)
1529 HostAdapter->WidePermitted = 0xFF;
1530 }
1531 }
1532 HostAdapter->DisconnectPermitted = 0xFF;
1533 HostAdapter->ParityCheckingEnabled = SetupInformation.ParityCheckingEnabled;
1534 HostAdapter->BusResetEnabled = true;
1535 }
1536 /*
1537 Determine the maximum number of Target IDs and Logical Units supported by
1538 this driver for Wide and Narrow Host Adapters.
1539 */
1540 HostAdapter->MaxTargetDevices = (HostAdapter->HostWideSCSI ? 16 : 8);
1541 HostAdapter->MaxLogicalUnits = (HostAdapter->ExtendedLUNSupport ? 32 : 8);
1542 /*
1543 Select appropriate values for the Mailbox Count, Driver Queue Depth,
1544 Initial CCBs, and Incremental CCBs variables based on whether or not Strict
1545 Round Robin Mode is supported. If Strict Round Robin Mode is supported,
1546 then there is no performance degradation in using the maximum possible
1547 number of Outgoing and Incoming Mailboxes and allowing the Tagged and
1548 Untagged Queue Depths to determine the actual utilization. If Strict Round
1549 Robin Mode is not supported, then the Host Adapter must scan all the
1550 Outgoing Mailboxes whenever an Outgoing Mailbox entry is made, which can
1551 cause a substantial performance penalty. The host adapters actually have
1552 room to store the following number of CCBs internally; that is, they can
1553 internally queue and manage this many active commands on the SCSI bus
1554 simultaneously. Performance measurements demonstrate that the Driver Queue
1555 Depth should be set to the Mailbox Count, rather than the Host Adapter
1556 Queue Depth (internal CCB capacity), as it is more efficient to have the
1557 queued commands waiting in Outgoing Mailboxes if necessary than to block
1558 the process in the higher levels of the SCSI Subsystem.
1559
1560 192 BT-948/958/958D
1561 100 BT-946C/956C/956CD/747C/757C/757CD/445C
1562 50 BT-545C/540CF
1563 30 BT-747S/747D/757S/757D/445S/545S/542D/542B/742A
1564 */
1565 if (HostAdapter->FirmwareVersion[0] == '5')
1566 HostAdapter->HostAdapterQueueDepth = 192;
1567 else if (HostAdapter->FirmwareVersion[0] == '4')
1568 HostAdapter->HostAdapterQueueDepth = (HostAdapter->HostAdapterBusType != BusLogic_ISA_Bus ? 100 : 50);
1569 else
1570 HostAdapter->HostAdapterQueueDepth = 30;
1571 if (strcmp(HostAdapter->FirmwareVersion, "3.31") >= 0) {
1572 HostAdapter->StrictRoundRobinModeSupport = true;
1573 HostAdapter->MailboxCount = BusLogic_MaxMailboxes;
1574 } else {
1575 HostAdapter->StrictRoundRobinModeSupport = false;
1576 HostAdapter->MailboxCount = 32;
1577 }
1578 HostAdapter->DriverQueueDepth = HostAdapter->MailboxCount;
1579 HostAdapter->InitialCCBs = 4 * BusLogic_CCB_AllocationGroupSize;
1580 HostAdapter->IncrementalCCBs = BusLogic_CCB_AllocationGroupSize;
1581 /*
1582 Tagged Queuing support is available and operates properly on all "W" series
1583 MultiMaster Host Adapters, on "C" series MultiMaster Host Adapters with
1584 firmware version 4.22 and above, and on "S" series MultiMaster Host
1585 Adapters with firmware version 3.35 and above.
1586 */
1587 HostAdapter->TaggedQueuingPermitted = 0;
1588 switch (HostAdapter->FirmwareVersion[0]) {
1589 case '5':
1590 HostAdapter->TaggedQueuingPermitted = 0xFFFF;
1591 break;
1592 case '4':
1593 if (strcmp(HostAdapter->FirmwareVersion, "4.22") >= 0)
1594 HostAdapter->TaggedQueuingPermitted = 0xFFFF;
1595 break;
1596 case '3':
1597 if (strcmp(HostAdapter->FirmwareVersion, "3.35") >= 0)
1598 HostAdapter->TaggedQueuingPermitted = 0xFFFF;
1599 break;
1600 }
1601 /*
1602 Determine the Host Adapter BIOS Address if the BIOS is enabled and
1603 save it in the Host Adapter structure. The BIOS is disabled if the
1604 BIOS_Address is 0.
1605 */
1606 HostAdapter->BIOS_Address = ExtendedSetupInformation.BIOS_Address << 12;
1607 /*
1608 ISA Host Adapters require Bounce Buffers if there is more than 16MB memory.
1609 */
1610 if (HostAdapter->HostAdapterBusType == BusLogic_ISA_Bus && (void *) high_memory > (void *) MAX_DMA_ADDRESS)
1611 HostAdapter->BounceBuffersRequired = true;
1612 /*
1613 BusLogic BT-445S Host Adapters prior to board revision E have a hardware
1614 bug whereby when the BIOS is enabled, transfers to/from the same address
1615 range the BIOS occupies modulo 16MB are handled incorrectly. Only properly
1616 functioning BT-445S Host Adapters have firmware version 3.37, so require
1617 that ISA Bounce Buffers be used for the buggy BT-445S models if there is
1618 more than 16MB memory.
1619 */
1620 if (HostAdapter->BIOS_Address > 0 && strcmp(HostAdapter->ModelName, "BT-445S") == 0 && strcmp(HostAdapter->FirmwareVersion, "3.37") < 0 && (void *) high_memory > (void *) MAX_DMA_ADDRESS)
1621 HostAdapter->BounceBuffersRequired = true;
1622 /*
1623 Initialize parameters common to MultiMaster and FlashPoint Host Adapters.
1624 */
1625 Common:
1626 /*
1627 Initialize the Host Adapter Full Model Name from the Model Name.
1628 */
1629 strcpy(HostAdapter->FullModelName, "BusLogic ");
1630 strcat(HostAdapter->FullModelName, HostAdapter->ModelName);
1631 /*
1632 Select an appropriate value for the Tagged Queue Depth either from a
1633 BusLogic Driver Options specification, or based on whether this Host
1634 Adapter requires that ISA Bounce Buffers be used. The Tagged Queue Depth
1635 is left at 0 for automatic determination in BusLogic_SelectQueueDepths.
1636 Initialize the Untagged Queue Depth.
1637 */
1638 for (TargetID = 0; TargetID < BusLogic_MaxTargetDevices; TargetID++) {
1639 unsigned char QueueDepth = 0;
1640 if (HostAdapter->DriverOptions != NULL && HostAdapter->DriverOptions->QueueDepth[TargetID] > 0)
1641 QueueDepth = HostAdapter->DriverOptions->QueueDepth[TargetID];
1642 else if (HostAdapter->BounceBuffersRequired)
1643 QueueDepth = BusLogic_TaggedQueueDepthBB;
1644 HostAdapter->QueueDepth[TargetID] = QueueDepth;
1645 }
1646 if (HostAdapter->BounceBuffersRequired)
1647 HostAdapter->UntaggedQueueDepth = BusLogic_UntaggedQueueDepthBB;
1648 else
1649 HostAdapter->UntaggedQueueDepth = BusLogic_UntaggedQueueDepth;
1650 if (HostAdapter->DriverOptions != NULL)
1651 HostAdapter->CommonQueueDepth = HostAdapter->DriverOptions->CommonQueueDepth;
1652 if (HostAdapter->CommonQueueDepth > 0 && HostAdapter->CommonQueueDepth < HostAdapter->UntaggedQueueDepth)
1653 HostAdapter->UntaggedQueueDepth = HostAdapter->CommonQueueDepth;
1654 /*
1655 Tagged Queuing is only allowed if Disconnect/Reconnect is permitted.
1656 Therefore, mask the Tagged Queuing Permitted Default bits with the
1657 Disconnect/Reconnect Permitted bits.
1658 */
1659 HostAdapter->TaggedQueuingPermitted &= HostAdapter->DisconnectPermitted;
1660 /*
1661 Combine the default Tagged Queuing Permitted bits with any BusLogic Driver
1662 Options Tagged Queuing specification.
1663 */
1664 if (HostAdapter->DriverOptions != NULL)
1665 HostAdapter->TaggedQueuingPermitted =
1666 (HostAdapter->DriverOptions->TaggedQueuingPermitted & HostAdapter->DriverOptions->TaggedQueuingPermittedMask) | (HostAdapter->TaggedQueuingPermitted & ~HostAdapter->DriverOptions->TaggedQueuingPermittedMask);
1667
1668 /*
1669 Select an appropriate value for Bus Settle Time either from a BusLogic
1670 Driver Options specification, or from BusLogic_DefaultBusSettleTime.
1671 */
1672 if (HostAdapter->DriverOptions != NULL && HostAdapter->DriverOptions->BusSettleTime > 0)
1673 HostAdapter->BusSettleTime = HostAdapter->DriverOptions->BusSettleTime;
1674 else
1675 HostAdapter->BusSettleTime = BusLogic_DefaultBusSettleTime;
1676 /*
1677 Indicate reading the Host Adapter Configuration completed successfully.
1678 */
1679 return true;
1680}
1681
1682
1683/*
1684 BusLogic_ReportHostAdapterConfiguration reports the configuration of
1685 Host Adapter.
1686*/
1687
1688static boolean __init BusLogic_ReportHostAdapterConfiguration(struct BusLogic_HostAdapter
1689 *HostAdapter)
1690{
1691 unsigned short AllTargetsMask = (1 << HostAdapter->MaxTargetDevices) - 1;
1692 unsigned short SynchronousPermitted, FastPermitted;
1693 unsigned short UltraPermitted, WidePermitted;
1694 unsigned short DisconnectPermitted, TaggedQueuingPermitted;
1695 boolean CommonSynchronousNegotiation, CommonTaggedQueueDepth;
1696 char SynchronousString[BusLogic_MaxTargetDevices + 1];
1697 char WideString[BusLogic_MaxTargetDevices + 1];
1698 char DisconnectString[BusLogic_MaxTargetDevices + 1];
1699 char TaggedQueuingString[BusLogic_MaxTargetDevices + 1];
1700 char *SynchronousMessage = SynchronousString;
1701 char *WideMessage = WideString;
1702 char *DisconnectMessage = DisconnectString;
1703 char *TaggedQueuingMessage = TaggedQueuingString;
1704 int TargetID;
1705 BusLogic_Info("Configuring BusLogic Model %s %s%s%s%s SCSI Host Adapter\n",
1706 HostAdapter, HostAdapter->ModelName,
1707 BusLogic_HostAdapterBusNames[HostAdapter->HostAdapterBusType], (HostAdapter->HostWideSCSI ? " Wide" : ""), (HostAdapter->HostDifferentialSCSI ? " Differential" : ""), (HostAdapter->HostUltraSCSI ? " Ultra" : ""));
1708 BusLogic_Info(" Firmware Version: %s, I/O Address: 0x%X, " "IRQ Channel: %d/%s\n", HostAdapter, HostAdapter->FirmwareVersion, HostAdapter->IO_Address, HostAdapter->IRQ_Channel, (HostAdapter->LevelSensitiveInterrupt ? "Level" : "Edge"));
1709 if (HostAdapter->HostAdapterBusType != BusLogic_PCI_Bus) {
1710 BusLogic_Info(" DMA Channel: ", HostAdapter);
1711 if (HostAdapter->DMA_Channel > 0)
1712 BusLogic_Info("%d, ", HostAdapter, HostAdapter->DMA_Channel);
1713 else
1714 BusLogic_Info("None, ", HostAdapter);
1715 if (HostAdapter->BIOS_Address > 0)
1716 BusLogic_Info("BIOS Address: 0x%X, ", HostAdapter, HostAdapter->BIOS_Address);
1717 else
1718 BusLogic_Info("BIOS Address: None, ", HostAdapter);
1719 } else {
1720 BusLogic_Info(" PCI Bus: %d, Device: %d, Address: ", HostAdapter, HostAdapter->Bus, HostAdapter->Device);
1721 if (HostAdapter->PCI_Address > 0)
1722 BusLogic_Info("0x%X, ", HostAdapter, HostAdapter->PCI_Address);
1723 else
1724 BusLogic_Info("Unassigned, ", HostAdapter);
1725 }
1726 BusLogic_Info("Host Adapter SCSI ID: %d\n", HostAdapter, HostAdapter->SCSI_ID);
1727 BusLogic_Info(" Parity Checking: %s, Extended Translation: %s\n", HostAdapter, (HostAdapter->ParityCheckingEnabled ? "Enabled" : "Disabled"), (HostAdapter->ExtendedTranslationEnabled ? "Enabled" : "Disabled"));
1728 AllTargetsMask &= ~(1 << HostAdapter->SCSI_ID);
1729 SynchronousPermitted = HostAdapter->SynchronousPermitted & AllTargetsMask;
1730 FastPermitted = HostAdapter->FastPermitted & AllTargetsMask;
1731 UltraPermitted = HostAdapter->UltraPermitted & AllTargetsMask;
1732 if ((BusLogic_MultiMasterHostAdapterP(HostAdapter) && (HostAdapter->FirmwareVersion[0] >= '4' || HostAdapter->HostAdapterBusType == BusLogic_EISA_Bus)) || BusLogic_FlashPointHostAdapterP(HostAdapter)) {
1733 CommonSynchronousNegotiation = false;
1734 if (SynchronousPermitted == 0) {
1735 SynchronousMessage = "Disabled";
1736 CommonSynchronousNegotiation = true;
1737 } else if (SynchronousPermitted == AllTargetsMask) {
1738 if (FastPermitted == 0) {
1739 SynchronousMessage = "Slow";
1740 CommonSynchronousNegotiation = true;
1741 } else if (FastPermitted == AllTargetsMask) {
1742 if (UltraPermitted == 0) {
1743 SynchronousMessage = "Fast";
1744 CommonSynchronousNegotiation = true;
1745 } else if (UltraPermitted == AllTargetsMask) {
1746 SynchronousMessage = "Ultra";
1747 CommonSynchronousNegotiation = true;
1748 }
1749 }
1750 }
1751 if (!CommonSynchronousNegotiation) {
1752 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
1753 SynchronousString[TargetID] = ((!(SynchronousPermitted & (1 << TargetID))) ? 'N' : (!(FastPermitted & (1 << TargetID)) ? 'S' : (!(UltraPermitted & (1 << TargetID)) ? 'F' : 'U')));
1754 SynchronousString[HostAdapter->SCSI_ID] = '#';
1755 SynchronousString[HostAdapter->MaxTargetDevices] = '\0';
1756 }
1757 } else
1758 SynchronousMessage = (SynchronousPermitted == 0 ? "Disabled" : "Enabled");
1759 WidePermitted = HostAdapter->WidePermitted & AllTargetsMask;
1760 if (WidePermitted == 0)
1761 WideMessage = "Disabled";
1762 else if (WidePermitted == AllTargetsMask)
1763 WideMessage = "Enabled";
1764 else {
1765 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
1766 WideString[TargetID] = ((WidePermitted & (1 << TargetID)) ? 'Y' : 'N');
1767 WideString[HostAdapter->SCSI_ID] = '#';
1768 WideString[HostAdapter->MaxTargetDevices] = '\0';
1769 }
1770 DisconnectPermitted = HostAdapter->DisconnectPermitted & AllTargetsMask;
1771 if (DisconnectPermitted == 0)
1772 DisconnectMessage = "Disabled";
1773 else if (DisconnectPermitted == AllTargetsMask)
1774 DisconnectMessage = "Enabled";
1775 else {
1776 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
1777 DisconnectString[TargetID] = ((DisconnectPermitted & (1 << TargetID)) ? 'Y' : 'N');
1778 DisconnectString[HostAdapter->SCSI_ID] = '#';
1779 DisconnectString[HostAdapter->MaxTargetDevices] = '\0';
1780 }
1781 TaggedQueuingPermitted = HostAdapter->TaggedQueuingPermitted & AllTargetsMask;
1782 if (TaggedQueuingPermitted == 0)
1783 TaggedQueuingMessage = "Disabled";
1784 else if (TaggedQueuingPermitted == AllTargetsMask)
1785 TaggedQueuingMessage = "Enabled";
1786 else {
1787 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
1788 TaggedQueuingString[TargetID] = ((TaggedQueuingPermitted & (1 << TargetID)) ? 'Y' : 'N');
1789 TaggedQueuingString[HostAdapter->SCSI_ID] = '#';
1790 TaggedQueuingString[HostAdapter->MaxTargetDevices] = '\0';
1791 }
1792 BusLogic_Info(" Synchronous Negotiation: %s, Wide Negotiation: %s\n", HostAdapter, SynchronousMessage, WideMessage);
1793 BusLogic_Info(" Disconnect/Reconnect: %s, Tagged Queuing: %s\n", HostAdapter, DisconnectMessage, TaggedQueuingMessage);
1794 if (BusLogic_MultiMasterHostAdapterP(HostAdapter)) {
1795 BusLogic_Info(" Scatter/Gather Limit: %d of %d segments, " "Mailboxes: %d\n", HostAdapter, HostAdapter->DriverScatterGatherLimit, HostAdapter->HostAdapterScatterGatherLimit, HostAdapter->MailboxCount);
1796 BusLogic_Info(" Driver Queue Depth: %d, " "Host Adapter Queue Depth: %d\n", HostAdapter, HostAdapter->DriverQueueDepth, HostAdapter->HostAdapterQueueDepth);
1797 } else
1798 BusLogic_Info(" Driver Queue Depth: %d, " "Scatter/Gather Limit: %d segments\n", HostAdapter, HostAdapter->DriverQueueDepth, HostAdapter->DriverScatterGatherLimit);
1799 BusLogic_Info(" Tagged Queue Depth: ", HostAdapter);
1800 CommonTaggedQueueDepth = true;
1801 for (TargetID = 1; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
1802 if (HostAdapter->QueueDepth[TargetID] != HostAdapter->QueueDepth[0]) {
1803 CommonTaggedQueueDepth = false;
1804 break;
1805 }
1806 if (CommonTaggedQueueDepth) {
1807 if (HostAdapter->QueueDepth[0] > 0)
1808 BusLogic_Info("%d", HostAdapter, HostAdapter->QueueDepth[0]);
1809 else
1810 BusLogic_Info("Automatic", HostAdapter);
1811 } else
1812 BusLogic_Info("Individual", HostAdapter);
1813 BusLogic_Info(", Untagged Queue Depth: %d\n", HostAdapter, HostAdapter->UntaggedQueueDepth);
1814 if (HostAdapter->TerminationInfoValid) {
1815 if (HostAdapter->HostWideSCSI)
1816 BusLogic_Info(" SCSI Bus Termination: %s", HostAdapter, (HostAdapter->LowByteTerminated ? (HostAdapter->HighByteTerminated ? "Both Enabled" : "Low Enabled")
1817 : (HostAdapter->HighByteTerminated ? "High Enabled" : "Both Disabled")));
1818 else
1819 BusLogic_Info(" SCSI Bus Termination: %s", HostAdapter, (HostAdapter->LowByteTerminated ? "Enabled" : "Disabled"));
1820 if (HostAdapter->HostSupportsSCAM)
1821 BusLogic_Info(", SCAM: %s", HostAdapter, (HostAdapter->SCAM_Enabled ? (HostAdapter->SCAM_Level2 ? "Enabled, Level 2" : "Enabled, Level 1")
1822 : "Disabled"));
1823 BusLogic_Info("\n", HostAdapter);
1824 }
1825 /*
1826 Indicate reporting the Host Adapter configuration completed successfully.
1827 */
1828 return true;
1829}
1830
1831
1832/*
1833 BusLogic_AcquireResources acquires the system resources necessary to use
1834 Host Adapter.
1835*/
1836
1837static boolean __init BusLogic_AcquireResources(struct BusLogic_HostAdapter *HostAdapter)
1838{
1839 if (HostAdapter->IRQ_Channel == 0) {
1840 BusLogic_Error("NO LEGAL INTERRUPT CHANNEL ASSIGNED - DETACHING\n", HostAdapter);
1841 return false;
1842 }
1843 /*
1844 Acquire shared access to the IRQ Channel.
1845 */
1846 if (request_irq(HostAdapter->IRQ_Channel, BusLogic_InterruptHandler, SA_SHIRQ, HostAdapter->FullModelName, HostAdapter) < 0) {
1847 BusLogic_Error("UNABLE TO ACQUIRE IRQ CHANNEL %d - DETACHING\n", HostAdapter, HostAdapter->IRQ_Channel);
1848 return false;
1849 }
1850 HostAdapter->IRQ_ChannelAcquired = true;
1851 /*
1852 Acquire exclusive access to the DMA Channel.
1853 */
1854 if (HostAdapter->DMA_Channel > 0) {
1855 if (request_dma(HostAdapter->DMA_Channel, HostAdapter->FullModelName) < 0) {
1856 BusLogic_Error("UNABLE TO ACQUIRE DMA CHANNEL %d - DETACHING\n", HostAdapter, HostAdapter->DMA_Channel);
1857 return false;
1858 }
1859 set_dma_mode(HostAdapter->DMA_Channel, DMA_MODE_CASCADE);
1860 enable_dma(HostAdapter->DMA_Channel);
1861 HostAdapter->DMA_ChannelAcquired = true;
1862 }
1863 /*
1864 Indicate the System Resource Acquisition completed successfully,
1865 */
1866 return true;
1867}
1868
1869
1870/*
1871 BusLogic_ReleaseResources releases any system resources previously acquired
1872 by BusLogic_AcquireResources.
1873*/
1874
1875static void BusLogic_ReleaseResources(struct BusLogic_HostAdapter *HostAdapter)
1876{
1877 /*
1878 Release shared access to the IRQ Channel.
1879 */
1880 if (HostAdapter->IRQ_ChannelAcquired)
1881 free_irq(HostAdapter->IRQ_Channel, HostAdapter);
1882 /*
1883 Release exclusive access to the DMA Channel.
1884 */
1885 if (HostAdapter->DMA_ChannelAcquired)
1886 free_dma(HostAdapter->DMA_Channel);
1887 /*
1888 Release any allocated memory structs not released elsewhere
1889 */
1890 if (HostAdapter->MailboxSpace)
1891 pci_free_consistent(HostAdapter->PCI_Device, HostAdapter->MailboxSize, HostAdapter->MailboxSpace, HostAdapter->MailboxSpaceHandle);
1892 HostAdapter->MailboxSpace = NULL;
1893 HostAdapter->MailboxSpaceHandle = 0;
1894 HostAdapter->MailboxSize = 0;
1895}
1896
1897
1898/*
1899 BusLogic_InitializeHostAdapter initializes Host Adapter. This is the only
1900 function called during SCSI Host Adapter detection which modifies the state
1901 of the Host Adapter from its initial power on or hard reset state.
1902*/
1903
1904static boolean BusLogic_InitializeHostAdapter(struct BusLogic_HostAdapter
1905 *HostAdapter)
1906{
1907 struct BusLogic_ExtendedMailboxRequest ExtendedMailboxRequest;
1908 enum BusLogic_RoundRobinModeRequest RoundRobinModeRequest;
1909 enum BusLogic_SetCCBFormatRequest SetCCBFormatRequest;
1910 int TargetID;
1911 /*
1912 Initialize the pointers to the first and last CCBs that are queued for
1913 completion processing.
1914 */
1915 HostAdapter->FirstCompletedCCB = NULL;
1916 HostAdapter->LastCompletedCCB = NULL;
1917 /*
1918 Initialize the Bus Device Reset Pending CCB, Tagged Queuing Active,
1919 Command Successful Flag, Active Commands, and Commands Since Reset
1920 for each Target Device.
1921 */
1922 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) {
1923 HostAdapter->BusDeviceResetPendingCCB[TargetID] = NULL;
1924 HostAdapter->TargetFlags[TargetID].TaggedQueuingActive = false;
1925 HostAdapter->TargetFlags[TargetID].CommandSuccessfulFlag = false;
1926 HostAdapter->ActiveCommands[TargetID] = 0;
1927 HostAdapter->CommandsSinceReset[TargetID] = 0;
1928 }
1929 /*
1930 FlashPoint Host Adapters do not use Outgoing and Incoming Mailboxes.
1931 */
1932 if (BusLogic_FlashPointHostAdapterP(HostAdapter))
1933 goto Done;
1934 /*
1935 Initialize the Outgoing and Incoming Mailbox pointers.
1936 */
1937 HostAdapter->MailboxSize = HostAdapter->MailboxCount * (sizeof(struct BusLogic_OutgoingMailbox) + sizeof(struct BusLogic_IncomingMailbox));
1938 HostAdapter->MailboxSpace = pci_alloc_consistent(HostAdapter->PCI_Device, HostAdapter->MailboxSize, &HostAdapter->MailboxSpaceHandle);
1939 if (HostAdapter->MailboxSpace == NULL)
1940 return BusLogic_Failure(HostAdapter, "MAILBOX ALLOCATION");
1941 HostAdapter->FirstOutgoingMailbox = (struct BusLogic_OutgoingMailbox *) HostAdapter->MailboxSpace;
1942 HostAdapter->LastOutgoingMailbox = HostAdapter->FirstOutgoingMailbox + HostAdapter->MailboxCount - 1;
1943 HostAdapter->NextOutgoingMailbox = HostAdapter->FirstOutgoingMailbox;
1944 HostAdapter->FirstIncomingMailbox = (struct BusLogic_IncomingMailbox *) (HostAdapter->LastOutgoingMailbox + 1);
1945 HostAdapter->LastIncomingMailbox = HostAdapter->FirstIncomingMailbox + HostAdapter->MailboxCount - 1;
1946 HostAdapter->NextIncomingMailbox = HostAdapter->FirstIncomingMailbox;
1947
1948 /*
1949 Initialize the Outgoing and Incoming Mailbox structures.
1950 */
1951 memset(HostAdapter->FirstOutgoingMailbox, 0, HostAdapter->MailboxCount * sizeof(struct BusLogic_OutgoingMailbox));
1952 memset(HostAdapter->FirstIncomingMailbox, 0, HostAdapter->MailboxCount * sizeof(struct BusLogic_IncomingMailbox));
1953 /*
1954 Initialize the Host Adapter's Pointer to the Outgoing/Incoming Mailboxes.
1955 */
1956 ExtendedMailboxRequest.MailboxCount = HostAdapter->MailboxCount;
1957 ExtendedMailboxRequest.BaseMailboxAddress = (u32) HostAdapter->MailboxSpaceHandle;
1958 if (BusLogic_Command(HostAdapter, BusLogic_InitializeExtendedMailbox, &ExtendedMailboxRequest, sizeof(ExtendedMailboxRequest), NULL, 0) < 0)
1959 return BusLogic_Failure(HostAdapter, "MAILBOX INITIALIZATION");
1960 /*
1961 Enable Strict Round Robin Mode if supported by the Host Adapter. In
1962 Strict Round Robin Mode, the Host Adapter only looks at the next Outgoing
1963 Mailbox for each new command, rather than scanning through all the
1964 Outgoing Mailboxes to find any that have new commands in them. Strict
1965 Round Robin Mode is significantly more efficient.
1966 */
1967 if (HostAdapter->StrictRoundRobinModeSupport) {
1968 RoundRobinModeRequest = BusLogic_StrictRoundRobinMode;
1969 if (BusLogic_Command(HostAdapter, BusLogic_EnableStrictRoundRobinMode, &RoundRobinModeRequest, sizeof(RoundRobinModeRequest), NULL, 0) < 0)
1970 return BusLogic_Failure(HostAdapter, "ENABLE STRICT ROUND ROBIN MODE");
1971 }
1972 /*
1973 For Host Adapters that support Extended LUN Format CCBs, issue the Set CCB
1974 Format command to allow 32 Logical Units per Target Device.
1975 */
1976 if (HostAdapter->ExtendedLUNSupport) {
1977 SetCCBFormatRequest = BusLogic_ExtendedLUNFormatCCB;
1978 if (BusLogic_Command(HostAdapter, BusLogic_SetCCBFormat, &SetCCBFormatRequest, sizeof(SetCCBFormatRequest), NULL, 0) < 0)
1979 return BusLogic_Failure(HostAdapter, "SET CCB FORMAT");
1980 }
1981 /*
1982 Announce Successful Initialization.
1983 */
1984 Done:
1985 if (!HostAdapter->HostAdapterInitialized) {
1986 BusLogic_Info("*** %s Initialized Successfully ***\n", HostAdapter, HostAdapter->FullModelName);
1987 BusLogic_Info("\n", HostAdapter);
1988 } else
1989 BusLogic_Warning("*** %s Initialized Successfully ***\n", HostAdapter, HostAdapter->FullModelName);
1990 HostAdapter->HostAdapterInitialized = true;
1991 /*
1992 Indicate the Host Adapter Initialization completed successfully.
1993 */
1994 return true;
1995}
1996
1997
1998/*
1999 BusLogic_TargetDeviceInquiry inquires about the Target Devices accessible
2000 through Host Adapter.
2001*/
2002
2003static boolean __init BusLogic_TargetDeviceInquiry(struct BusLogic_HostAdapter
2004 *HostAdapter)
2005{
2006 u16 InstalledDevices;
2007 u8 InstalledDevicesID0to7[8];
2008 struct BusLogic_SetupInformation SetupInformation;
2009 u8 SynchronousPeriod[BusLogic_MaxTargetDevices];
2010 unsigned char RequestedReplyLength;
2011 int TargetID;
2012 /*
2013 Wait a few seconds between the Host Adapter Hard Reset which initiates
2014 a SCSI Bus Reset and issuing any SCSI Commands. Some SCSI devices get
2015 confused if they receive SCSI Commands too soon after a SCSI Bus Reset.
2016 */
2017 BusLogic_Delay(HostAdapter->BusSettleTime);
2018 /*
2019 FlashPoint Host Adapters do not provide for Target Device Inquiry.
2020 */
2021 if (BusLogic_FlashPointHostAdapterP(HostAdapter))
2022 return true;
2023 /*
2024 Inhibit the Target Device Inquiry if requested.
2025 */
2026 if (HostAdapter->DriverOptions != NULL && HostAdapter->DriverOptions->LocalOptions.InhibitTargetInquiry)
2027 return true;
2028 /*
2029 Issue the Inquire Target Devices command for host adapters with firmware
2030 version 4.25 or later, or the Inquire Installed Devices ID 0 to 7 command
2031 for older host adapters. This is necessary to force Synchronous Transfer
2032 Negotiation so that the Inquire Setup Information and Inquire Synchronous
2033 Period commands will return valid data. The Inquire Target Devices command
2034 is preferable to Inquire Installed Devices ID 0 to 7 since it only probes
2035 Logical Unit 0 of each Target Device.
2036 */
2037 if (strcmp(HostAdapter->FirmwareVersion, "4.25") >= 0) {
2038
2039 /*
2040 * Issue a Inquire Target Devices command. Inquire Target Devices only
2041 * tests Logical Unit 0 of each Target Device unlike the Inquire Installed
2042 * Devices commands which test Logical Units 0 - 7. Two bytes are
2043 * returned, where byte 0 bit 0 set indicates that Target Device 0 exists,
2044 * and so on.
2045 */
2046
2047 if (BusLogic_Command(HostAdapter, BusLogic_InquireTargetDevices, NULL, 0, &InstalledDevices, sizeof(InstalledDevices))
2048 != sizeof(InstalledDevices))
2049 return BusLogic_Failure(HostAdapter, "INQUIRE TARGET DEVICES");
2050 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
2051 HostAdapter->TargetFlags[TargetID].TargetExists = (InstalledDevices & (1 << TargetID) ? true : false);
2052 } else {
2053
2054 /*
2055 * Issue an Inquire Installed Devices command. For each Target Device,
2056 * a byte is returned where bit 0 set indicates that Logical Unit 0
2057 * exists, bit 1 set indicates that Logical Unit 1 exists, and so on.
2058 */
2059
2060 if (BusLogic_Command(HostAdapter, BusLogic_InquireInstalledDevicesID0to7, NULL, 0, &InstalledDevicesID0to7, sizeof(InstalledDevicesID0to7))
2061 != sizeof(InstalledDevicesID0to7))
2062 return BusLogic_Failure(HostAdapter, "INQUIRE INSTALLED DEVICES ID 0 TO 7");
2063 for (TargetID = 0; TargetID < 8; TargetID++)
2064 HostAdapter->TargetFlags[TargetID].TargetExists = (InstalledDevicesID0to7[TargetID] != 0 ? true : false);
2065 }
2066 /*
2067 Issue the Inquire Setup Information command.
2068 */
2069 RequestedReplyLength = sizeof(SetupInformation);
2070 if (BusLogic_Command(HostAdapter, BusLogic_InquireSetupInformation, &RequestedReplyLength, sizeof(RequestedReplyLength), &SetupInformation, sizeof(SetupInformation))
2071 != sizeof(SetupInformation))
2072 return BusLogic_Failure(HostAdapter, "INQUIRE SETUP INFORMATION");
2073 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
2074 HostAdapter->SynchronousOffset[TargetID] = (TargetID < 8 ? SetupInformation.SynchronousValuesID0to7[TargetID].Offset : SetupInformation.SynchronousValuesID8to15[TargetID - 8].Offset);
2075 if (strcmp(HostAdapter->FirmwareVersion, "5.06L") >= 0)
2076 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
2077 HostAdapter->TargetFlags[TargetID].WideTransfersActive = (TargetID < 8 ? (SetupInformation.WideTransfersActiveID0to7 & (1 << TargetID)
2078 ? true : false)
2079 : (SetupInformation.WideTransfersActiveID8to15 & (1 << (TargetID - 8))
2080 ? true : false));
2081 /*
2082 Issue the Inquire Synchronous Period command.
2083 */
2084 if (HostAdapter->FirmwareVersion[0] >= '3') {
2085
2086 /* Issue a Inquire Synchronous Period command. For each Target Device,
2087 * a byte is returned which represents the Synchronous Transfer Period
2088 * in units of 10 nanoseconds.
2089 */
2090
2091 RequestedReplyLength = sizeof(SynchronousPeriod);
2092 if (BusLogic_Command(HostAdapter, BusLogic_InquireSynchronousPeriod, &RequestedReplyLength, sizeof(RequestedReplyLength), &SynchronousPeriod, sizeof(SynchronousPeriod))
2093 != sizeof(SynchronousPeriod))
2094 return BusLogic_Failure(HostAdapter, "INQUIRE SYNCHRONOUS PERIOD");
2095 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
2096 HostAdapter->SynchronousPeriod[TargetID] = SynchronousPeriod[TargetID];
2097 } else
2098 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
2099 if (SetupInformation.SynchronousValuesID0to7[TargetID].Offset > 0)
2100 HostAdapter->SynchronousPeriod[TargetID] = 20 + 5 * SetupInformation.SynchronousValuesID0to7[TargetID]
2101 .TransferPeriod;
2102 /*
2103 Indicate the Target Device Inquiry completed successfully.
2104 */
2105 return true;
2106}
2107
2108/*
2109 BusLogic_InitializeHostStructure initializes the fields in the SCSI Host
2110 structure. The base, io_port, n_io_ports, irq, and dma_channel fields in the
2111 SCSI Host structure are intentionally left uninitialized, as this driver
2112 handles acquisition and release of these resources explicitly, as well as
2113 ensuring exclusive access to the Host Adapter hardware and data structures
2114 through explicit acquisition and release of the Host Adapter's Lock.
2115*/
2116
2117static void __init BusLogic_InitializeHostStructure(struct BusLogic_HostAdapter
2118 *HostAdapter, struct Scsi_Host *Host)
2119{
2120 Host->max_id = HostAdapter->MaxTargetDevices;
2121 Host->max_lun = HostAdapter->MaxLogicalUnits;
2122 Host->max_channel = 0;
2123 Host->unique_id = HostAdapter->IO_Address;
2124 Host->this_id = HostAdapter->SCSI_ID;
2125 Host->can_queue = HostAdapter->DriverQueueDepth;
2126 Host->sg_tablesize = HostAdapter->DriverScatterGatherLimit;
2127 Host->unchecked_isa_dma = HostAdapter->BounceBuffersRequired;
2128 Host->cmd_per_lun = HostAdapter->UntaggedQueueDepth;
2129}
2130
2131/*
2132 BusLogic_SlaveConfigure will actually set the queue depth on individual
2133 scsi devices as they are permanently added to the device chain. We
2134 shamelessly rip off the SelectQueueDepths code to make this work mostly
2135 like it used to. Since we don't get called once at the end of the scan
2136 but instead get called for each device, we have to do things a bit
2137 differently.
2138*/
2139static int BusLogic_SlaveConfigure(struct scsi_device *Device)
2140{
2141 struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) Device->host->hostdata;
2142 int TargetID = Device->id;
2143 int QueueDepth = HostAdapter->QueueDepth[TargetID];
2144
2145 if (HostAdapter->TargetFlags[TargetID].TaggedQueuingSupported && (HostAdapter->TaggedQueuingPermitted & (1 << TargetID))) {
2146 if (QueueDepth == 0)
2147 QueueDepth = BusLogic_MaxAutomaticTaggedQueueDepth;
2148 HostAdapter->QueueDepth[TargetID] = QueueDepth;
2149 scsi_adjust_queue_depth(Device, MSG_SIMPLE_TAG, QueueDepth);
2150 } else {
2151 HostAdapter->TaggedQueuingPermitted &= ~(1 << TargetID);
2152 QueueDepth = HostAdapter->UntaggedQueueDepth;
2153 HostAdapter->QueueDepth[TargetID] = QueueDepth;
2154 scsi_adjust_queue_depth(Device, 0, QueueDepth);
2155 }
2156 QueueDepth = 0;
2157 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
2158 if (HostAdapter->TargetFlags[TargetID].TargetExists) {
2159 QueueDepth += HostAdapter->QueueDepth[TargetID];
2160 }
2161 if (QueueDepth > HostAdapter->AllocatedCCBs)
2162 BusLogic_CreateAdditionalCCBs(HostAdapter, QueueDepth - HostAdapter->AllocatedCCBs, false);
2163 return 0;
2164}
2165
2166/*
2167 BusLogic_DetectHostAdapter probes for BusLogic Host Adapters at the standard
2168 I/O Addresses where they may be located, initializing, registering, and
2169 reporting the configuration of each BusLogic Host Adapter it finds. It
2170 returns the number of BusLogic Host Adapters successfully initialized and
2171 registered.
2172*/
2173
2174static int __init BusLogic_init(void)
2175{
2176 int BusLogicHostAdapterCount = 0, DriverOptionsIndex = 0, ProbeIndex;
2177 struct BusLogic_HostAdapter *PrototypeHostAdapter;
2178
2179#ifdef MODULE
2180 if (BusLogic)
2181 BusLogic_Setup(BusLogic);
2182#endif
2183
2184 if (BusLogic_ProbeOptions.NoProbe)
2185 return -ENODEV;
2186 BusLogic_ProbeInfoList = (struct BusLogic_ProbeInfo *)
2187 kmalloc(BusLogic_MaxHostAdapters * sizeof(struct BusLogic_ProbeInfo), GFP_ATOMIC);
2188 if (BusLogic_ProbeInfoList == NULL) {
2189 BusLogic_Error("BusLogic: Unable to allocate Probe Info List\n", NULL);
2190 return -ENOMEM;
2191 }
2192 memset(BusLogic_ProbeInfoList, 0, BusLogic_MaxHostAdapters * sizeof(struct BusLogic_ProbeInfo));
2193 PrototypeHostAdapter = (struct BusLogic_HostAdapter *)
2194 kmalloc(sizeof(struct BusLogic_HostAdapter), GFP_ATOMIC);
2195 if (PrototypeHostAdapter == NULL) {
2196 kfree(BusLogic_ProbeInfoList);
2197 BusLogic_Error("BusLogic: Unable to allocate Prototype " "Host Adapter\n", NULL);
2198 return -ENOMEM;
2199 }
2200 memset(PrototypeHostAdapter, 0, sizeof(struct BusLogic_HostAdapter));
2201#ifdef MODULE
2202 if (BusLogic != NULL)
2203 BusLogic_Setup(BusLogic);
2204#endif
2205 BusLogic_InitializeProbeInfoList(PrototypeHostAdapter);
2206 for (ProbeIndex = 0; ProbeIndex < BusLogic_ProbeInfoCount; ProbeIndex++) {
2207 struct BusLogic_ProbeInfo *ProbeInfo = &BusLogic_ProbeInfoList[ProbeIndex];
2208 struct BusLogic_HostAdapter *HostAdapter = PrototypeHostAdapter;
2209 struct Scsi_Host *Host;
2210 if (ProbeInfo->IO_Address == 0)
2211 continue;
2212 memset(HostAdapter, 0, sizeof(struct BusLogic_HostAdapter));
2213 HostAdapter->HostAdapterType = ProbeInfo->HostAdapterType;
2214 HostAdapter->HostAdapterBusType = ProbeInfo->HostAdapterBusType;
2215 HostAdapter->IO_Address = ProbeInfo->IO_Address;
2216 HostAdapter->PCI_Address = ProbeInfo->PCI_Address;
2217 HostAdapter->Bus = ProbeInfo->Bus;
2218 HostAdapter->Device = ProbeInfo->Device;
Petr Vandrovec745caf72006-01-11 11:31:07 -08002219 HostAdapter->PCI_Device = ProbeInfo->PCI_Device;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002220 HostAdapter->IRQ_Channel = ProbeInfo->IRQ_Channel;
2221 HostAdapter->AddressCount = BusLogic_HostAdapterAddressCount[HostAdapter->HostAdapterType];
2222 /*
2223 Probe the Host Adapter. If unsuccessful, abort further initialization.
2224 */
2225 if (!BusLogic_ProbeHostAdapter(HostAdapter))
2226 continue;
2227 /*
2228 Hard Reset the Host Adapter. If unsuccessful, abort further
2229 initialization.
2230 */
2231 if (!BusLogic_HardwareResetHostAdapter(HostAdapter, true))
2232 continue;
2233 /*
2234 Check the Host Adapter. If unsuccessful, abort further initialization.
2235 */
2236 if (!BusLogic_CheckHostAdapter(HostAdapter))
2237 continue;
2238 /*
2239 Initialize the Driver Options field if provided.
2240 */
2241 if (DriverOptionsIndex < BusLogic_DriverOptionsCount)
2242 HostAdapter->DriverOptions = &BusLogic_DriverOptions[DriverOptionsIndex++];
2243 /*
2244 Announce the Driver Version and Date, Author's Name, Copyright Notice,
2245 and Electronic Mail Address.
2246 */
2247 BusLogic_AnnounceDriver(HostAdapter);
2248 /*
2249 Register usage of the I/O Address range. From this point onward, any
2250 failure will be assumed to be due to a problem with the Host Adapter,
2251 rather than due to having mistakenly identified this port as belonging
2252 to a BusLogic Host Adapter. The I/O Address range will not be
2253 released, thereby preventing it from being incorrectly identified as
2254 any other type of Host Adapter.
2255 */
2256 if (!request_region(HostAdapter->IO_Address, HostAdapter->AddressCount, "BusLogic"))
2257 continue;
2258 /*
2259 Register the SCSI Host structure.
2260 */
2261
2262 Host = scsi_host_alloc(&Bus_Logic_template, sizeof(struct BusLogic_HostAdapter));
2263 if (Host == NULL) {
2264 release_region(HostAdapter->IO_Address, HostAdapter->AddressCount);
2265 continue;
2266 }
2267 HostAdapter = (struct BusLogic_HostAdapter *) Host->hostdata;
2268 memcpy(HostAdapter, PrototypeHostAdapter, sizeof(struct BusLogic_HostAdapter));
2269 HostAdapter->SCSI_Host = Host;
2270 HostAdapter->HostNumber = Host->host_no;
2271 /*
2272 Add Host Adapter to the end of the list of registered BusLogic
2273 Host Adapters.
2274 */
2275 list_add_tail(&HostAdapter->host_list, &BusLogic_host_list);
2276
2277 /*
2278 Read the Host Adapter Configuration, Configure the Host Adapter,
2279 Acquire the System Resources necessary to use the Host Adapter, then
2280 Create the Initial CCBs, Initialize the Host Adapter, and finally
2281 perform Target Device Inquiry.
2282 */
2283 if (BusLogic_ReadHostAdapterConfiguration(HostAdapter) &&
2284 BusLogic_ReportHostAdapterConfiguration(HostAdapter) && BusLogic_AcquireResources(HostAdapter) && BusLogic_CreateInitialCCBs(HostAdapter) && BusLogic_InitializeHostAdapter(HostAdapter) && BusLogic_TargetDeviceInquiry(HostAdapter)) {
2285 /*
2286 Initialization has been completed successfully. Release and
2287 re-register usage of the I/O Address range so that the Model
2288 Name of the Host Adapter will appear, and initialize the SCSI
2289 Host structure.
2290 */
2291 release_region(HostAdapter->IO_Address, HostAdapter->AddressCount);
2292 if (!request_region(HostAdapter->IO_Address, HostAdapter->AddressCount, HostAdapter->FullModelName)) {
2293 printk(KERN_WARNING "BusLogic: Release and re-register of " "port 0x%04lx failed \n", (unsigned long) HostAdapter->IO_Address);
2294 BusLogic_DestroyCCBs(HostAdapter);
2295 BusLogic_ReleaseResources(HostAdapter);
2296 list_del(&HostAdapter->host_list);
2297 scsi_host_put(Host);
2298 } else {
2299 BusLogic_InitializeHostStructure(HostAdapter, Host);
Petr Vandrovec745caf72006-01-11 11:31:07 -08002300 scsi_add_host(Host, HostAdapter->PCI_Device ? &HostAdapter->PCI_Device->dev : NULL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002301 scsi_scan_host(Host);
2302 BusLogicHostAdapterCount++;
2303 }
2304 } else {
2305 /*
2306 An error occurred during Host Adapter Configuration Querying, Host
2307 Adapter Configuration, Resource Acquisition, CCB Creation, Host
2308 Adapter Initialization, or Target Device Inquiry, so remove Host
2309 Adapter from the list of registered BusLogic Host Adapters, destroy
2310 the CCBs, Release the System Resources, and Unregister the SCSI
2311 Host.
2312 */
2313 BusLogic_DestroyCCBs(HostAdapter);
2314 BusLogic_ReleaseResources(HostAdapter);
2315 list_del(&HostAdapter->host_list);
2316 scsi_host_put(Host);
2317 }
2318 }
2319 kfree(PrototypeHostAdapter);
2320 kfree(BusLogic_ProbeInfoList);
2321 BusLogic_ProbeInfoList = NULL;
2322 return 0;
2323}
2324
2325
2326/*
2327 BusLogic_ReleaseHostAdapter releases all resources previously acquired to
2328 support a specific Host Adapter, including the I/O Address range, and
2329 unregisters the BusLogic Host Adapter.
2330*/
2331
2332static int __exit BusLogic_ReleaseHostAdapter(struct BusLogic_HostAdapter *HostAdapter)
2333{
2334 struct Scsi_Host *Host = HostAdapter->SCSI_Host;
2335
2336 scsi_remove_host(Host);
2337
2338 /*
2339 FlashPoint Host Adapters must first be released by the FlashPoint
2340 SCCB Manager.
2341 */
2342 if (BusLogic_FlashPointHostAdapterP(HostAdapter))
2343 FlashPoint_ReleaseHostAdapter(HostAdapter->CardHandle);
2344 /*
2345 Destroy the CCBs and release any system resources acquired to
2346 support Host Adapter.
2347 */
2348 BusLogic_DestroyCCBs(HostAdapter);
2349 BusLogic_ReleaseResources(HostAdapter);
2350 /*
2351 Release usage of the I/O Address range.
2352 */
2353 release_region(HostAdapter->IO_Address, HostAdapter->AddressCount);
2354 /*
2355 Remove Host Adapter from the list of registered BusLogic Host Adapters.
2356 */
2357 list_del(&HostAdapter->host_list);
2358
2359 scsi_host_put(Host);
2360 return 0;
2361}
2362
2363
2364/*
2365 BusLogic_QueueCompletedCCB queues CCB for completion processing.
2366*/
2367
2368static void BusLogic_QueueCompletedCCB(struct BusLogic_CCB *CCB)
2369{
2370 struct BusLogic_HostAdapter *HostAdapter = CCB->HostAdapter;
2371 CCB->Status = BusLogic_CCB_Completed;
2372 CCB->Next = NULL;
2373 if (HostAdapter->FirstCompletedCCB == NULL) {
2374 HostAdapter->FirstCompletedCCB = CCB;
2375 HostAdapter->LastCompletedCCB = CCB;
2376 } else {
2377 HostAdapter->LastCompletedCCB->Next = CCB;
2378 HostAdapter->LastCompletedCCB = CCB;
2379 }
2380 HostAdapter->ActiveCommands[CCB->TargetID]--;
2381}
2382
2383
2384/*
2385 BusLogic_ComputeResultCode computes a SCSI Subsystem Result Code from
2386 the Host Adapter Status and Target Device Status.
2387*/
2388
2389static int BusLogic_ComputeResultCode(struct BusLogic_HostAdapter *HostAdapter, enum BusLogic_HostAdapterStatus HostAdapterStatus, enum BusLogic_TargetDeviceStatus TargetDeviceStatus)
2390{
2391 int HostStatus;
2392 switch (HostAdapterStatus) {
2393 case BusLogic_CommandCompletedNormally:
2394 case BusLogic_LinkedCommandCompleted:
2395 case BusLogic_LinkedCommandCompletedWithFlag:
2396 HostStatus = DID_OK;
2397 break;
2398 case BusLogic_SCSISelectionTimeout:
2399 HostStatus = DID_TIME_OUT;
2400 break;
2401 case BusLogic_InvalidOutgoingMailboxActionCode:
2402 case BusLogic_InvalidCommandOperationCode:
2403 case BusLogic_InvalidCommandParameter:
2404 BusLogic_Warning("BusLogic Driver Protocol Error 0x%02X\n", HostAdapter, HostAdapterStatus);
2405 case BusLogic_DataUnderRun:
2406 case BusLogic_DataOverRun:
2407 case BusLogic_UnexpectedBusFree:
2408 case BusLogic_LinkedCCBhasInvalidLUN:
2409 case BusLogic_AutoRequestSenseFailed:
2410 case BusLogic_TaggedQueuingMessageRejected:
2411 case BusLogic_UnsupportedMessageReceived:
2412 case BusLogic_HostAdapterHardwareFailed:
2413 case BusLogic_TargetDeviceReconnectedImproperly:
2414 case BusLogic_AbortQueueGenerated:
2415 case BusLogic_HostAdapterSoftwareError:
2416 case BusLogic_HostAdapterHardwareTimeoutError:
2417 case BusLogic_SCSIParityErrorDetected:
2418 HostStatus = DID_ERROR;
2419 break;
2420 case BusLogic_InvalidBusPhaseRequested:
2421 case BusLogic_TargetFailedResponseToATN:
2422 case BusLogic_HostAdapterAssertedRST:
2423 case BusLogic_OtherDeviceAssertedRST:
2424 case BusLogic_HostAdapterAssertedBusDeviceReset:
2425 HostStatus = DID_RESET;
2426 break;
2427 default:
2428 BusLogic_Warning("Unknown Host Adapter Status 0x%02X\n", HostAdapter, HostAdapterStatus);
2429 HostStatus = DID_ERROR;
2430 break;
2431 }
2432 return (HostStatus << 16) | TargetDeviceStatus;
2433}
2434
2435
2436/*
2437 BusLogic_ScanIncomingMailboxes scans the Incoming Mailboxes saving any
2438 Incoming Mailbox entries for completion processing.
2439*/
2440
2441static void BusLogic_ScanIncomingMailboxes(struct BusLogic_HostAdapter *HostAdapter)
2442{
2443 /*
2444 Scan through the Incoming Mailboxes in Strict Round Robin fashion, saving
2445 any completed CCBs for further processing. It is essential that for each
2446 CCB and SCSI Command issued, command completion processing is performed
2447 exactly once. Therefore, only Incoming Mailboxes with completion code
2448 Command Completed Without Error, Command Completed With Error, or Command
2449 Aborted At Host Request are saved for completion processing. When an
2450 Incoming Mailbox has a completion code of Aborted Command Not Found, the
2451 CCB had already completed or been aborted before the current Abort request
2452 was processed, and so completion processing has already occurred and no
2453 further action should be taken.
2454 */
2455 struct BusLogic_IncomingMailbox *NextIncomingMailbox = HostAdapter->NextIncomingMailbox;
2456 enum BusLogic_CompletionCode CompletionCode;
2457 while ((CompletionCode = NextIncomingMailbox->CompletionCode) != BusLogic_IncomingMailboxFree) {
2458 /*
2459 We are only allowed to do this because we limit our architectures we
2460 run on to machines where bus_to_virt() actually works. There *needs*
2461 to be a dma_addr_to_virt() in the new PCI DMA mapping interface to
2462 replace bus_to_virt() or else this code is going to become very
2463 innefficient.
2464 */
2465 struct BusLogic_CCB *CCB = (struct BusLogic_CCB *) Bus_to_Virtual(NextIncomingMailbox->CCB);
2466 if (CompletionCode != BusLogic_AbortedCommandNotFound) {
2467 if (CCB->Status == BusLogic_CCB_Active || CCB->Status == BusLogic_CCB_Reset) {
2468 /*
2469 Save the Completion Code for this CCB and queue the CCB
2470 for completion processing.
2471 */
2472 CCB->CompletionCode = CompletionCode;
2473 BusLogic_QueueCompletedCCB(CCB);
2474 } else {
2475 /*
2476 If a CCB ever appears in an Incoming Mailbox and is not marked
2477 as status Active or Reset, then there is most likely a bug in
2478 the Host Adapter firmware.
2479 */
2480 BusLogic_Warning("Illegal CCB #%ld status %d in " "Incoming Mailbox\n", HostAdapter, CCB->SerialNumber, CCB->Status);
2481 }
2482 }
2483 NextIncomingMailbox->CompletionCode = BusLogic_IncomingMailboxFree;
2484 if (++NextIncomingMailbox > HostAdapter->LastIncomingMailbox)
2485 NextIncomingMailbox = HostAdapter->FirstIncomingMailbox;
2486 }
2487 HostAdapter->NextIncomingMailbox = NextIncomingMailbox;
2488}
2489
2490
2491/*
2492 BusLogic_ProcessCompletedCCBs iterates over the completed CCBs for Host
2493 Adapter setting the SCSI Command Result Codes, deallocating the CCBs, and
2494 calling the SCSI Subsystem Completion Routines. The Host Adapter's Lock
2495 should already have been acquired by the caller.
2496*/
2497
2498static void BusLogic_ProcessCompletedCCBs(struct BusLogic_HostAdapter *HostAdapter)
2499{
2500 if (HostAdapter->ProcessCompletedCCBsActive)
2501 return;
2502 HostAdapter->ProcessCompletedCCBsActive = true;
2503 while (HostAdapter->FirstCompletedCCB != NULL) {
2504 struct BusLogic_CCB *CCB = HostAdapter->FirstCompletedCCB;
2505 struct scsi_cmnd *Command = CCB->Command;
2506 HostAdapter->FirstCompletedCCB = CCB->Next;
2507 if (HostAdapter->FirstCompletedCCB == NULL)
2508 HostAdapter->LastCompletedCCB = NULL;
2509 /*
2510 Process the Completed CCB.
2511 */
2512 if (CCB->Opcode == BusLogic_BusDeviceReset) {
2513 int TargetID = CCB->TargetID;
2514 BusLogic_Warning("Bus Device Reset CCB #%ld to Target " "%d Completed\n", HostAdapter, CCB->SerialNumber, TargetID);
2515 BusLogic_IncrementErrorCounter(&HostAdapter->TargetStatistics[TargetID].BusDeviceResetsCompleted);
2516 HostAdapter->TargetFlags[TargetID].TaggedQueuingActive = false;
2517 HostAdapter->CommandsSinceReset[TargetID] = 0;
2518 HostAdapter->LastResetCompleted[TargetID] = jiffies;
2519 /*
2520 Place CCB back on the Host Adapter's free list.
2521 */
2522 BusLogic_DeallocateCCB(CCB);
2523#if 0 /* this needs to be redone different for new EH */
2524 /*
2525 Bus Device Reset CCBs have the Command field non-NULL only when a
2526 Bus Device Reset was requested for a Command that did not have a
2527 currently active CCB in the Host Adapter (i.e., a Synchronous
2528 Bus Device Reset), and hence would not have its Completion Routine
2529 called otherwise.
2530 */
2531 while (Command != NULL) {
2532 struct scsi_cmnd *NextCommand = Command->reset_chain;
2533 Command->reset_chain = NULL;
2534 Command->result = DID_RESET << 16;
2535 Command->scsi_done(Command);
2536 Command = NextCommand;
2537 }
2538#endif
2539 /*
2540 Iterate over the CCBs for this Host Adapter performing completion
2541 processing for any CCBs marked as Reset for this Target.
2542 */
2543 for (CCB = HostAdapter->All_CCBs; CCB != NULL; CCB = CCB->NextAll)
2544 if (CCB->Status == BusLogic_CCB_Reset && CCB->TargetID == TargetID) {
2545 Command = CCB->Command;
2546 BusLogic_DeallocateCCB(CCB);
2547 HostAdapter->ActiveCommands[TargetID]--;
2548 Command->result = DID_RESET << 16;
2549 Command->scsi_done(Command);
2550 }
2551 HostAdapter->BusDeviceResetPendingCCB[TargetID] = NULL;
2552 } else {
2553 /*
2554 Translate the Completion Code, Host Adapter Status, and Target
2555 Device Status into a SCSI Subsystem Result Code.
2556 */
2557 switch (CCB->CompletionCode) {
2558 case BusLogic_IncomingMailboxFree:
2559 case BusLogic_AbortedCommandNotFound:
2560 case BusLogic_InvalidCCB:
2561 BusLogic_Warning("CCB #%ld to Target %d Impossible State\n", HostAdapter, CCB->SerialNumber, CCB->TargetID);
2562 break;
2563 case BusLogic_CommandCompletedWithoutError:
2564 HostAdapter->TargetStatistics[CCB->TargetID]
2565 .CommandsCompleted++;
2566 HostAdapter->TargetFlags[CCB->TargetID]
2567 .CommandSuccessfulFlag = true;
2568 Command->result = DID_OK << 16;
2569 break;
2570 case BusLogic_CommandAbortedAtHostRequest:
2571 BusLogic_Warning("CCB #%ld to Target %d Aborted\n", HostAdapter, CCB->SerialNumber, CCB->TargetID);
2572 BusLogic_IncrementErrorCounter(&HostAdapter->TargetStatistics[CCB->TargetID]
2573 .CommandAbortsCompleted);
2574 Command->result = DID_ABORT << 16;
2575 break;
2576 case BusLogic_CommandCompletedWithError:
2577 Command->result = BusLogic_ComputeResultCode(HostAdapter, CCB->HostAdapterStatus, CCB->TargetDeviceStatus);
2578 if (CCB->HostAdapterStatus != BusLogic_SCSISelectionTimeout) {
2579 HostAdapter->TargetStatistics[CCB->TargetID]
2580 .CommandsCompleted++;
2581 if (BusLogic_GlobalOptions.TraceErrors) {
2582 int i;
2583 BusLogic_Notice("CCB #%ld Target %d: Result %X Host "
2584 "Adapter Status %02X " "Target Status %02X\n", HostAdapter, CCB->SerialNumber, CCB->TargetID, Command->result, CCB->HostAdapterStatus, CCB->TargetDeviceStatus);
2585 BusLogic_Notice("CDB ", HostAdapter);
2586 for (i = 0; i < CCB->CDB_Length; i++)
2587 BusLogic_Notice(" %02X", HostAdapter, CCB->CDB[i]);
2588 BusLogic_Notice("\n", HostAdapter);
2589 BusLogic_Notice("Sense ", HostAdapter);
2590 for (i = 0; i < CCB->SenseDataLength; i++)
2591 BusLogic_Notice(" %02X", HostAdapter, Command->sense_buffer[i]);
2592 BusLogic_Notice("\n", HostAdapter);
2593 }
2594 }
2595 break;
2596 }
2597 /*
2598 When an INQUIRY command completes normally, save the
2599 CmdQue (Tagged Queuing Supported) and WBus16 (16 Bit
2600 Wide Data Transfers Supported) bits.
2601 */
2602 if (CCB->CDB[0] == INQUIRY && CCB->CDB[1] == 0 && CCB->HostAdapterStatus == BusLogic_CommandCompletedNormally) {
2603 struct BusLogic_TargetFlags *TargetFlags = &HostAdapter->TargetFlags[CCB->TargetID];
2604 struct SCSI_Inquiry *InquiryResult = (struct SCSI_Inquiry *) Command->request_buffer;
2605 TargetFlags->TargetExists = true;
2606 TargetFlags->TaggedQueuingSupported = InquiryResult->CmdQue;
2607 TargetFlags->WideTransfersSupported = InquiryResult->WBus16;
2608 }
2609 /*
2610 Place CCB back on the Host Adapter's free list.
2611 */
2612 BusLogic_DeallocateCCB(CCB);
2613 /*
2614 Call the SCSI Command Completion Routine.
2615 */
2616 Command->scsi_done(Command);
2617 }
2618 }
2619 HostAdapter->ProcessCompletedCCBsActive = false;
2620}
2621
2622
2623/*
2624 BusLogic_InterruptHandler handles hardware interrupts from BusLogic Host
2625 Adapters.
2626*/
2627
2628static irqreturn_t BusLogic_InterruptHandler(int IRQ_Channel, void *DeviceIdentifier, struct pt_regs *InterruptRegisters)
2629{
2630 struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) DeviceIdentifier;
2631 unsigned long ProcessorFlags;
2632 /*
2633 Acquire exclusive access to Host Adapter.
2634 */
2635 spin_lock_irqsave(HostAdapter->SCSI_Host->host_lock, ProcessorFlags);
2636 /*
2637 Handle Interrupts appropriately for each Host Adapter type.
2638 */
2639 if (BusLogic_MultiMasterHostAdapterP(HostAdapter)) {
2640 union BusLogic_InterruptRegister InterruptRegister;
2641 /*
2642 Read the Host Adapter Interrupt Register.
2643 */
2644 InterruptRegister.All = BusLogic_ReadInterruptRegister(HostAdapter);
2645 if (InterruptRegister.ir.InterruptValid) {
2646 /*
2647 Acknowledge the interrupt and reset the Host Adapter
2648 Interrupt Register.
2649 */
2650 BusLogic_InterruptReset(HostAdapter);
2651 /*
2652 Process valid External SCSI Bus Reset and Incoming Mailbox
2653 Loaded Interrupts. Command Complete Interrupts are noted,
2654 and Outgoing Mailbox Available Interrupts are ignored, as
2655 they are never enabled.
2656 */
2657 if (InterruptRegister.ir.ExternalBusReset)
2658 HostAdapter->HostAdapterExternalReset = true;
2659 else if (InterruptRegister.ir.IncomingMailboxLoaded)
2660 BusLogic_ScanIncomingMailboxes(HostAdapter);
2661 else if (InterruptRegister.ir.CommandComplete)
2662 HostAdapter->HostAdapterCommandCompleted = true;
2663 }
2664 } else {
2665 /*
2666 Check if there is a pending interrupt for this Host Adapter.
2667 */
2668 if (FlashPoint_InterruptPending(HostAdapter->CardHandle))
2669 switch (FlashPoint_HandleInterrupt(HostAdapter->CardHandle)) {
2670 case FlashPoint_NormalInterrupt:
2671 break;
2672 case FlashPoint_ExternalBusReset:
2673 HostAdapter->HostAdapterExternalReset = true;
2674 break;
2675 case FlashPoint_InternalError:
2676 BusLogic_Warning("Internal FlashPoint Error detected" " - Resetting Host Adapter\n", HostAdapter);
2677 HostAdapter->HostAdapterInternalError = true;
2678 break;
2679 }
2680 }
2681 /*
2682 Process any completed CCBs.
2683 */
2684 if (HostAdapter->FirstCompletedCCB != NULL)
2685 BusLogic_ProcessCompletedCCBs(HostAdapter);
2686 /*
2687 Reset the Host Adapter if requested.
2688 */
2689 if (HostAdapter->HostAdapterExternalReset) {
2690 BusLogic_Warning("Resetting %s due to External SCSI Bus Reset\n", HostAdapter, HostAdapter->FullModelName);
2691 BusLogic_IncrementErrorCounter(&HostAdapter->ExternalHostAdapterResets);
2692 BusLogic_ResetHostAdapter(HostAdapter, false);
2693 HostAdapter->HostAdapterExternalReset = false;
2694 } else if (HostAdapter->HostAdapterInternalError) {
2695 BusLogic_Warning("Resetting %s due to Host Adapter Internal Error\n", HostAdapter, HostAdapter->FullModelName);
2696 BusLogic_IncrementErrorCounter(&HostAdapter->HostAdapterInternalErrors);
2697 BusLogic_ResetHostAdapter(HostAdapter, true);
2698 HostAdapter->HostAdapterInternalError = false;
2699 }
2700 /*
2701 Release exclusive access to Host Adapter.
2702 */
2703 spin_unlock_irqrestore(HostAdapter->SCSI_Host->host_lock, ProcessorFlags);
2704 return IRQ_HANDLED;
2705}
2706
2707
2708/*
2709 BusLogic_WriteOutgoingMailbox places CCB and Action Code into an Outgoing
2710 Mailbox for execution by Host Adapter. The Host Adapter's Lock should
2711 already have been acquired by the caller.
2712*/
2713
2714static boolean BusLogic_WriteOutgoingMailbox(struct BusLogic_HostAdapter
2715 *HostAdapter, enum BusLogic_ActionCode ActionCode, struct BusLogic_CCB *CCB)
2716{
2717 struct BusLogic_OutgoingMailbox *NextOutgoingMailbox;
2718 NextOutgoingMailbox = HostAdapter->NextOutgoingMailbox;
2719 if (NextOutgoingMailbox->ActionCode == BusLogic_OutgoingMailboxFree) {
2720 CCB->Status = BusLogic_CCB_Active;
2721 /*
2722 The CCB field must be written before the Action Code field since
2723 the Host Adapter is operating asynchronously and the locking code
2724 does not protect against simultaneous access by the Host Adapter.
2725 */
2726 NextOutgoingMailbox->CCB = CCB->DMA_Handle;
2727 NextOutgoingMailbox->ActionCode = ActionCode;
2728 BusLogic_StartMailboxCommand(HostAdapter);
2729 if (++NextOutgoingMailbox > HostAdapter->LastOutgoingMailbox)
2730 NextOutgoingMailbox = HostAdapter->FirstOutgoingMailbox;
2731 HostAdapter->NextOutgoingMailbox = NextOutgoingMailbox;
2732 if (ActionCode == BusLogic_MailboxStartCommand) {
2733 HostAdapter->ActiveCommands[CCB->TargetID]++;
2734 if (CCB->Opcode != BusLogic_BusDeviceReset)
2735 HostAdapter->TargetStatistics[CCB->TargetID].CommandsAttempted++;
2736 }
2737 return true;
2738 }
2739 return false;
2740}
2741
2742/* Error Handling (EH) support */
2743
2744static int BusLogic_host_reset(struct scsi_cmnd * SCpnt)
2745{
2746 struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) SCpnt->device->host->hostdata;
2747
2748 unsigned int id = SCpnt->device->id;
2749 struct BusLogic_TargetStatistics *stats = &HostAdapter->TargetStatistics[id];
Jeff Garzik df0ae242005-05-28 07:57:14 -04002750 int rc;
2751
2752 spin_lock_irq(SCpnt->device->host->host_lock);
2753
Linus Torvalds1da177e2005-04-16 15:20:36 -07002754 BusLogic_IncrementErrorCounter(&stats->HostAdapterResetsRequested);
2755
Jeff Garzik df0ae242005-05-28 07:57:14 -04002756 rc = BusLogic_ResetHostAdapter(HostAdapter, false);
2757 spin_unlock_irq(SCpnt->device->host->host_lock);
2758 return rc;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002759}
2760
2761/*
2762 BusLogic_QueueCommand creates a CCB for Command and places it into an
2763 Outgoing Mailbox for execution by the associated Host Adapter.
2764*/
2765
2766static int BusLogic_QueueCommand(struct scsi_cmnd *Command, void (*CompletionRoutine) (struct scsi_cmnd *))
2767{
2768 struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) Command->device->host->hostdata;
2769 struct BusLogic_TargetFlags *TargetFlags = &HostAdapter->TargetFlags[Command->device->id];
2770 struct BusLogic_TargetStatistics *TargetStatistics = HostAdapter->TargetStatistics;
2771 unsigned char *CDB = Command->cmnd;
2772 int CDB_Length = Command->cmd_len;
2773 int TargetID = Command->device->id;
2774 int LogicalUnit = Command->device->lun;
2775 void *BufferPointer = Command->request_buffer;
2776 int BufferLength = Command->request_bufflen;
2777 int SegmentCount = Command->use_sg;
2778 struct BusLogic_CCB *CCB;
2779 /*
2780 SCSI REQUEST_SENSE commands will be executed automatically by the Host
2781 Adapter for any errors, so they should not be executed explicitly unless
2782 the Sense Data is zero indicating that no error occurred.
2783 */
2784 if (CDB[0] == REQUEST_SENSE && Command->sense_buffer[0] != 0) {
2785 Command->result = DID_OK << 16;
2786 CompletionRoutine(Command);
2787 return 0;
2788 }
2789 /*
2790 Allocate a CCB from the Host Adapter's free list. In the unlikely event
2791 that there are none available and memory allocation fails, wait 1 second
2792 and try again. If that fails, the Host Adapter is probably hung so signal
2793 an error as a Host Adapter Hard Reset should be initiated soon.
2794 */
2795 CCB = BusLogic_AllocateCCB(HostAdapter);
2796 if (CCB == NULL) {
2797 spin_unlock_irq(HostAdapter->SCSI_Host->host_lock);
2798 BusLogic_Delay(1);
2799 spin_lock_irq(HostAdapter->SCSI_Host->host_lock);
2800 CCB = BusLogic_AllocateCCB(HostAdapter);
2801 if (CCB == NULL) {
2802 Command->result = DID_ERROR << 16;
2803 CompletionRoutine(Command);
2804 return 0;
2805 }
2806 }
2807 /*
2808 Initialize the fields in the BusLogic Command Control Block (CCB).
2809 */
2810 if (SegmentCount == 0 && BufferLength != 0) {
2811 CCB->Opcode = BusLogic_InitiatorCCB;
2812 CCB->DataLength = BufferLength;
2813 CCB->DataPointer = pci_map_single(HostAdapter->PCI_Device,
2814 BufferPointer, BufferLength,
2815 Command->sc_data_direction);
2816 } else if (SegmentCount != 0) {
2817 struct scatterlist *ScatterList = (struct scatterlist *) BufferPointer;
2818 int Segment, Count;
2819
2820 Count = pci_map_sg(HostAdapter->PCI_Device, ScatterList, SegmentCount,
2821 Command->sc_data_direction);
2822 CCB->Opcode = BusLogic_InitiatorCCB_ScatterGather;
2823 CCB->DataLength = Count * sizeof(struct BusLogic_ScatterGatherSegment);
2824 if (BusLogic_MultiMasterHostAdapterP(HostAdapter))
2825 CCB->DataPointer = (unsigned int) CCB->DMA_Handle + ((unsigned long) &CCB->ScatterGatherList - (unsigned long) CCB);
2826 else
2827 CCB->DataPointer = Virtual_to_32Bit_Virtual(CCB->ScatterGatherList);
2828 for (Segment = 0; Segment < Count; Segment++) {
2829 CCB->ScatterGatherList[Segment].SegmentByteCount = sg_dma_len(ScatterList + Segment);
2830 CCB->ScatterGatherList[Segment].SegmentDataPointer = sg_dma_address(ScatterList + Segment);
2831 }
2832 } else {
2833 CCB->Opcode = BusLogic_InitiatorCCB;
2834 CCB->DataLength = BufferLength;
2835 CCB->DataPointer = 0;
2836 }
2837 switch (CDB[0]) {
2838 case READ_6:
2839 case READ_10:
2840 CCB->DataDirection = BusLogic_DataInLengthChecked;
2841 TargetStatistics[TargetID].ReadCommands++;
2842 BusLogic_IncrementByteCounter(&TargetStatistics[TargetID].TotalBytesRead, BufferLength);
2843 BusLogic_IncrementSizeBucket(TargetStatistics[TargetID].ReadCommandSizeBuckets, BufferLength);
2844 break;
2845 case WRITE_6:
2846 case WRITE_10:
2847 CCB->DataDirection = BusLogic_DataOutLengthChecked;
2848 TargetStatistics[TargetID].WriteCommands++;
2849 BusLogic_IncrementByteCounter(&TargetStatistics[TargetID].TotalBytesWritten, BufferLength);
2850 BusLogic_IncrementSizeBucket(TargetStatistics[TargetID].WriteCommandSizeBuckets, BufferLength);
2851 break;
2852 default:
2853 CCB->DataDirection = BusLogic_UncheckedDataTransfer;
2854 break;
2855 }
2856 CCB->CDB_Length = CDB_Length;
2857 CCB->HostAdapterStatus = 0;
2858 CCB->TargetDeviceStatus = 0;
2859 CCB->TargetID = TargetID;
2860 CCB->LogicalUnit = LogicalUnit;
2861 CCB->TagEnable = false;
2862 CCB->LegacyTagEnable = false;
2863 /*
2864 BusLogic recommends that after a Reset the first couple of commands that
2865 are sent to a Target Device be sent in a non Tagged Queue fashion so that
2866 the Host Adapter and Target Device can establish Synchronous and Wide
2867 Transfer before Queue Tag messages can interfere with the Synchronous and
2868 Wide Negotiation messages. By waiting to enable Tagged Queuing until after
2869 the first BusLogic_MaxTaggedQueueDepth commands have been queued, it is
2870 assured that after a Reset any pending commands are requeued before Tagged
2871 Queuing is enabled and that the Tagged Queuing message will not occur while
2872 the partition table is being printed. In addition, some devices do not
2873 properly handle the transition from non-tagged to tagged commands, so it is
2874 necessary to wait until there are no pending commands for a target device
2875 before queuing tagged commands.
2876 */
2877 if (HostAdapter->CommandsSinceReset[TargetID]++ >=
2878 BusLogic_MaxTaggedQueueDepth && !TargetFlags->TaggedQueuingActive && HostAdapter->ActiveCommands[TargetID] == 0 && TargetFlags->TaggedQueuingSupported && (HostAdapter->TaggedQueuingPermitted & (1 << TargetID))) {
2879 TargetFlags->TaggedQueuingActive = true;
2880 BusLogic_Notice("Tagged Queuing now active for Target %d\n", HostAdapter, TargetID);
2881 }
2882 if (TargetFlags->TaggedQueuingActive) {
2883 enum BusLogic_QueueTag QueueTag = BusLogic_SimpleQueueTag;
2884 /*
2885 When using Tagged Queuing with Simple Queue Tags, it appears that disk
2886 drive controllers do not guarantee that a queued command will not
2887 remain in a disconnected state indefinitely if commands that read or
2888 write nearer the head position continue to arrive without interruption.
2889 Therefore, for each Target Device this driver keeps track of the last
2890 time either the queue was empty or an Ordered Queue Tag was issued. If
2891 more than 4 seconds (one fifth of the 20 second disk timeout) have
2892 elapsed since this last sequence point, this command will be issued
2893 with an Ordered Queue Tag rather than a Simple Queue Tag, which forces
2894 the Target Device to complete all previously queued commands before
2895 this command may be executed.
2896 */
2897 if (HostAdapter->ActiveCommands[TargetID] == 0)
2898 HostAdapter->LastSequencePoint[TargetID] = jiffies;
2899 else if (jiffies - HostAdapter->LastSequencePoint[TargetID] > 4 * HZ) {
2900 HostAdapter->LastSequencePoint[TargetID] = jiffies;
2901 QueueTag = BusLogic_OrderedQueueTag;
2902 }
2903 if (HostAdapter->ExtendedLUNSupport) {
2904 CCB->TagEnable = true;
2905 CCB->QueueTag = QueueTag;
2906 } else {
2907 CCB->LegacyTagEnable = true;
2908 CCB->LegacyQueueTag = QueueTag;
2909 }
2910 }
2911 memcpy(CCB->CDB, CDB, CDB_Length);
2912 CCB->SenseDataLength = sizeof(Command->sense_buffer);
2913 CCB->SenseDataPointer = pci_map_single(HostAdapter->PCI_Device, Command->sense_buffer, CCB->SenseDataLength, PCI_DMA_FROMDEVICE);
2914 CCB->Command = Command;
2915 Command->scsi_done = CompletionRoutine;
2916 if (BusLogic_MultiMasterHostAdapterP(HostAdapter)) {
2917 /*
2918 Place the CCB in an Outgoing Mailbox. The higher levels of the SCSI
2919 Subsystem should not attempt to queue more commands than can be placed
2920 in Outgoing Mailboxes, so there should always be one free. In the
2921 unlikely event that there are none available, wait 1 second and try
2922 again. If that fails, the Host Adapter is probably hung so signal an
2923 error as a Host Adapter Hard Reset should be initiated soon.
2924 */
2925 if (!BusLogic_WriteOutgoingMailbox(HostAdapter, BusLogic_MailboxStartCommand, CCB)) {
2926 spin_unlock_irq(HostAdapter->SCSI_Host->host_lock);
2927 BusLogic_Warning("Unable to write Outgoing Mailbox - " "Pausing for 1 second\n", HostAdapter);
2928 BusLogic_Delay(1);
2929 spin_lock_irq(HostAdapter->SCSI_Host->host_lock);
2930 if (!BusLogic_WriteOutgoingMailbox(HostAdapter, BusLogic_MailboxStartCommand, CCB)) {
2931 BusLogic_Warning("Still unable to write Outgoing Mailbox - " "Host Adapter Dead?\n", HostAdapter);
2932 BusLogic_DeallocateCCB(CCB);
2933 Command->result = DID_ERROR << 16;
2934 Command->scsi_done(Command);
2935 }
2936 }
2937 } else {
2938 /*
2939 Call the FlashPoint SCCB Manager to start execution of the CCB.
2940 */
2941 CCB->Status = BusLogic_CCB_Active;
2942 HostAdapter->ActiveCommands[TargetID]++;
2943 TargetStatistics[TargetID].CommandsAttempted++;
2944 FlashPoint_StartCCB(HostAdapter->CardHandle, CCB);
2945 /*
2946 The Command may have already completed and BusLogic_QueueCompletedCCB
2947 been called, or it may still be pending.
2948 */
2949 if (CCB->Status == BusLogic_CCB_Completed)
2950 BusLogic_ProcessCompletedCCBs(HostAdapter);
2951 }
2952 return 0;
2953}
2954
2955
2956/*
2957 BusLogic_AbortCommand aborts Command if possible.
2958*/
2959
2960static int BusLogic_AbortCommand(struct scsi_cmnd *Command)
2961{
2962 struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) Command->device->host->hostdata;
2963
2964 int TargetID = Command->device->id;
2965 struct BusLogic_CCB *CCB;
2966 BusLogic_IncrementErrorCounter(&HostAdapter->TargetStatistics[TargetID].CommandAbortsRequested);
2967 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -07002968 Attempt to find an Active CCB for this Command. If no Active CCB for this
2969 Command is found, then no Abort is necessary.
2970 */
2971 for (CCB = HostAdapter->All_CCBs; CCB != NULL; CCB = CCB->NextAll)
2972 if (CCB->Command == Command)
2973 break;
2974 if (CCB == NULL) {
2975 BusLogic_Warning("Unable to Abort Command to Target %d - " "No CCB Found\n", HostAdapter, TargetID);
2976 return SUCCESS;
2977 } else if (CCB->Status == BusLogic_CCB_Completed) {
2978 BusLogic_Warning("Unable to Abort Command to Target %d - " "CCB Completed\n", HostAdapter, TargetID);
2979 return SUCCESS;
2980 } else if (CCB->Status == BusLogic_CCB_Reset) {
2981 BusLogic_Warning("Unable to Abort Command to Target %d - " "CCB Reset\n", HostAdapter, TargetID);
2982 return SUCCESS;
2983 }
2984 if (BusLogic_MultiMasterHostAdapterP(HostAdapter)) {
2985 /*
2986 Attempt to Abort this CCB. MultiMaster Firmware versions prior to 5.xx
2987 do not generate Abort Tag messages, but only generate the non-tagged
2988 Abort message. Since non-tagged commands are not sent by the Host
2989 Adapter until the queue of outstanding tagged commands has completed,
2990 and the Abort message is treated as a non-tagged command, it is
2991 effectively impossible to abort commands when Tagged Queuing is active.
2992 Firmware version 5.xx does generate Abort Tag messages, so it is
2993 possible to abort commands when Tagged Queuing is active.
2994 */
2995 if (HostAdapter->TargetFlags[TargetID].TaggedQueuingActive && HostAdapter->FirmwareVersion[0] < '5') {
2996 BusLogic_Warning("Unable to Abort CCB #%ld to Target %d - " "Abort Tag Not Supported\n", HostAdapter, CCB->SerialNumber, TargetID);
2997 return FAILURE;
2998 } else if (BusLogic_WriteOutgoingMailbox(HostAdapter, BusLogic_MailboxAbortCommand, CCB)) {
2999 BusLogic_Warning("Aborting CCB #%ld to Target %d\n", HostAdapter, CCB->SerialNumber, TargetID);
3000 BusLogic_IncrementErrorCounter(&HostAdapter->TargetStatistics[TargetID].CommandAbortsAttempted);
3001 return SUCCESS;
3002 } else {
3003 BusLogic_Warning("Unable to Abort CCB #%ld to Target %d - " "No Outgoing Mailboxes\n", HostAdapter, CCB->SerialNumber, TargetID);
3004 return FAILURE;
3005 }
3006 } else {
3007 /*
3008 Call the FlashPoint SCCB Manager to abort execution of the CCB.
3009 */
3010 BusLogic_Warning("Aborting CCB #%ld to Target %d\n", HostAdapter, CCB->SerialNumber, TargetID);
3011 BusLogic_IncrementErrorCounter(&HostAdapter->TargetStatistics[TargetID].CommandAbortsAttempted);
3012 FlashPoint_AbortCCB(HostAdapter->CardHandle, CCB);
3013 /*
3014 The Abort may have already been completed and
3015 BusLogic_QueueCompletedCCB been called, or it
3016 may still be pending.
3017 */
3018 if (CCB->Status == BusLogic_CCB_Completed) {
3019 BusLogic_ProcessCompletedCCBs(HostAdapter);
3020 }
3021 return SUCCESS;
3022 }
3023 return SUCCESS;
3024}
3025
3026/*
3027 BusLogic_ResetHostAdapter resets Host Adapter if possible, marking all
3028 currently executing SCSI Commands as having been Reset.
3029*/
3030
3031static int BusLogic_ResetHostAdapter(struct BusLogic_HostAdapter *HostAdapter, boolean HardReset)
3032{
3033 struct BusLogic_CCB *CCB;
3034 int TargetID;
3035
3036 /*
3037 * Attempt to Reset and Reinitialize the Host Adapter.
3038 */
3039
3040 if (!(BusLogic_HardwareResetHostAdapter(HostAdapter, HardReset) && BusLogic_InitializeHostAdapter(HostAdapter))) {
3041 BusLogic_Error("Resetting %s Failed\n", HostAdapter, HostAdapter->FullModelName);
3042 return FAILURE;
3043 }
3044
3045 /*
3046 * Deallocate all currently executing CCBs.
3047 */
3048
3049 for (CCB = HostAdapter->All_CCBs; CCB != NULL; CCB = CCB->NextAll)
3050 if (CCB->Status == BusLogic_CCB_Active)
3051 BusLogic_DeallocateCCB(CCB);
3052 /*
3053 * Wait a few seconds between the Host Adapter Hard Reset which
3054 * initiates a SCSI Bus Reset and issuing any SCSI Commands. Some
3055 * SCSI devices get confused if they receive SCSI Commands too soon
3056 * after a SCSI Bus Reset.
3057 */
3058
3059 if (HardReset) {
3060 spin_unlock_irq(HostAdapter->SCSI_Host->host_lock);
3061 BusLogic_Delay(HostAdapter->BusSettleTime);
3062 spin_lock_irq(HostAdapter->SCSI_Host->host_lock);
3063 }
3064
3065 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) {
3066 HostAdapter->LastResetAttempted[TargetID] = jiffies;
3067 HostAdapter->LastResetCompleted[TargetID] = jiffies;
3068 }
3069 return SUCCESS;
3070}
3071
3072/*
3073 BusLogic_BIOSDiskParameters returns the Heads/Sectors/Cylinders BIOS Disk
3074 Parameters for Disk. The default disk geometry is 64 heads, 32 sectors, and
3075 the appropriate number of cylinders so as not to exceed drive capacity. In
3076 order for disks equal to or larger than 1 GB to be addressable by the BIOS
3077 without exceeding the BIOS limitation of 1024 cylinders, Extended Translation
3078 may be enabled in AutoSCSI on FlashPoint Host Adapters and on "W" and "C"
3079 series MultiMaster Host Adapters, or by a dip switch setting on "S" and "A"
3080 series MultiMaster Host Adapters. With Extended Translation enabled, drives
3081 between 1 GB inclusive and 2 GB exclusive are given a disk geometry of 128
3082 heads and 32 sectors, and drives above 2 GB inclusive are given a disk
3083 geometry of 255 heads and 63 sectors. However, if the BIOS detects that the
3084 Extended Translation setting does not match the geometry in the partition
3085 table, then the translation inferred from the partition table will be used by
3086 the BIOS, and a warning may be displayed.
3087*/
3088
3089static int BusLogic_BIOSDiskParameters(struct scsi_device *sdev, struct block_device *Device, sector_t capacity, int *Parameters)
3090{
3091 struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) sdev->host->hostdata;
3092 struct BIOS_DiskParameters *DiskParameters = (struct BIOS_DiskParameters *) Parameters;
3093 unsigned char *buf;
3094 if (HostAdapter->ExtendedTranslationEnabled && capacity >= 2 * 1024 * 1024 /* 1 GB in 512 byte sectors */ ) {
3095 if (capacity >= 4 * 1024 * 1024 /* 2 GB in 512 byte sectors */ ) {
3096 DiskParameters->Heads = 255;
3097 DiskParameters->Sectors = 63;
3098 } else {
3099 DiskParameters->Heads = 128;
3100 DiskParameters->Sectors = 32;
3101 }
3102 } else {
3103 DiskParameters->Heads = 64;
3104 DiskParameters->Sectors = 32;
3105 }
3106 DiskParameters->Cylinders = (unsigned long) capacity / (DiskParameters->Heads * DiskParameters->Sectors);
3107 buf = scsi_bios_ptable(Device);
3108 if (buf == NULL)
3109 return 0;
3110 /*
3111 If the boot sector partition table flag is valid, search for a partition
3112 table entry whose end_head matches one of the standard BusLogic geometry
3113 translations (64/32, 128/32, or 255/63).
3114 */
3115 if (*(unsigned short *) (buf + 64) == 0xAA55) {
3116 struct partition *FirstPartitionEntry = (struct partition *) buf;
3117 struct partition *PartitionEntry = FirstPartitionEntry;
3118 int SavedCylinders = DiskParameters->Cylinders, PartitionNumber;
3119 unsigned char PartitionEntryEndHead = 0, PartitionEntryEndSector = 0;
3120 for (PartitionNumber = 0; PartitionNumber < 4; PartitionNumber++) {
3121 PartitionEntryEndHead = PartitionEntry->end_head;
3122 PartitionEntryEndSector = PartitionEntry->end_sector & 0x3F;
3123 if (PartitionEntryEndHead == 64 - 1) {
3124 DiskParameters->Heads = 64;
3125 DiskParameters->Sectors = 32;
3126 break;
3127 } else if (PartitionEntryEndHead == 128 - 1) {
3128 DiskParameters->Heads = 128;
3129 DiskParameters->Sectors = 32;
3130 break;
3131 } else if (PartitionEntryEndHead == 255 - 1) {
3132 DiskParameters->Heads = 255;
3133 DiskParameters->Sectors = 63;
3134 break;
3135 }
3136 PartitionEntry++;
3137 }
3138 if (PartitionNumber == 4) {
3139 PartitionEntryEndHead = FirstPartitionEntry->end_head;
3140 PartitionEntryEndSector = FirstPartitionEntry->end_sector & 0x3F;
3141 }
3142 DiskParameters->Cylinders = (unsigned long) capacity / (DiskParameters->Heads * DiskParameters->Sectors);
3143 if (PartitionNumber < 4 && PartitionEntryEndSector == DiskParameters->Sectors) {
3144 if (DiskParameters->Cylinders != SavedCylinders)
3145 BusLogic_Warning("Adopting Geometry %d/%d from Partition Table\n", HostAdapter, DiskParameters->Heads, DiskParameters->Sectors);
3146 } else if (PartitionEntryEndHead > 0 || PartitionEntryEndSector > 0) {
3147 BusLogic_Warning("Warning: Partition Table appears to " "have Geometry %d/%d which is\n", HostAdapter, PartitionEntryEndHead + 1, PartitionEntryEndSector);
3148 BusLogic_Warning("not compatible with current BusLogic " "Host Adapter Geometry %d/%d\n", HostAdapter, DiskParameters->Heads, DiskParameters->Sectors);
3149 }
3150 }
3151 kfree(buf);
3152 return 0;
3153}
3154
3155
3156/*
3157 BugLogic_ProcDirectoryInfo implements /proc/scsi/BusLogic/<N>.
3158*/
3159
3160static int BusLogic_ProcDirectoryInfo(struct Scsi_Host *shost, char *ProcBuffer, char **StartPointer, off_t Offset, int BytesAvailable, int WriteFlag)
3161{
3162 struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) shost->hostdata;
3163 struct BusLogic_TargetStatistics *TargetStatistics;
3164 int TargetID, Length;
3165 char *Buffer;
3166
3167 TargetStatistics = HostAdapter->TargetStatistics;
3168 if (WriteFlag) {
3169 HostAdapter->ExternalHostAdapterResets = 0;
3170 HostAdapter->HostAdapterInternalErrors = 0;
3171 memset(TargetStatistics, 0, BusLogic_MaxTargetDevices * sizeof(struct BusLogic_TargetStatistics));
3172 return 0;
3173 }
3174 Buffer = HostAdapter->MessageBuffer;
3175 Length = HostAdapter->MessageBufferLength;
3176 Length += sprintf(&Buffer[Length], "\n\
3177Current Driver Queue Depth: %d\n\
3178Currently Allocated CCBs: %d\n", HostAdapter->DriverQueueDepth, HostAdapter->AllocatedCCBs);
3179 Length += sprintf(&Buffer[Length], "\n\n\
3180 DATA TRANSFER STATISTICS\n\
3181\n\
3182Target Tagged Queuing Queue Depth Active Attempted Completed\n\
3183====== ============== =========== ====== ========= =========\n");
3184 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) {
3185 struct BusLogic_TargetFlags *TargetFlags = &HostAdapter->TargetFlags[TargetID];
3186 if (!TargetFlags->TargetExists)
3187 continue;
3188 Length += sprintf(&Buffer[Length], " %2d %s", TargetID, (TargetFlags->TaggedQueuingSupported ? (TargetFlags->TaggedQueuingActive ? " Active" : (HostAdapter->TaggedQueuingPermitted & (1 << TargetID)
3189 ? " Permitted" : " Disabled"))
3190 : "Not Supported"));
3191 Length += sprintf(&Buffer[Length],
3192 " %3d %3u %9u %9u\n", HostAdapter->QueueDepth[TargetID], HostAdapter->ActiveCommands[TargetID], TargetStatistics[TargetID].CommandsAttempted, TargetStatistics[TargetID].CommandsCompleted);
3193 }
3194 Length += sprintf(&Buffer[Length], "\n\
3195Target Read Commands Write Commands Total Bytes Read Total Bytes Written\n\
3196====== ============= ============== =================== ===================\n");
3197 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) {
3198 struct BusLogic_TargetFlags *TargetFlags = &HostAdapter->TargetFlags[TargetID];
3199 if (!TargetFlags->TargetExists)
3200 continue;
3201 Length += sprintf(&Buffer[Length], " %2d %9u %9u", TargetID, TargetStatistics[TargetID].ReadCommands, TargetStatistics[TargetID].WriteCommands);
3202 if (TargetStatistics[TargetID].TotalBytesRead.Billions > 0)
3203 Length += sprintf(&Buffer[Length], " %9u%09u", TargetStatistics[TargetID].TotalBytesRead.Billions, TargetStatistics[TargetID].TotalBytesRead.Units);
3204 else
3205 Length += sprintf(&Buffer[Length], " %9u", TargetStatistics[TargetID].TotalBytesRead.Units);
3206 if (TargetStatistics[TargetID].TotalBytesWritten.Billions > 0)
3207 Length += sprintf(&Buffer[Length], " %9u%09u\n", TargetStatistics[TargetID].TotalBytesWritten.Billions, TargetStatistics[TargetID].TotalBytesWritten.Units);
3208 else
3209 Length += sprintf(&Buffer[Length], " %9u\n", TargetStatistics[TargetID].TotalBytesWritten.Units);
3210 }
3211 Length += sprintf(&Buffer[Length], "\n\
3212Target Command 0-1KB 1-2KB 2-4KB 4-8KB 8-16KB\n\
3213====== ======= ========= ========= ========= ========= =========\n");
3214 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) {
3215 struct BusLogic_TargetFlags *TargetFlags = &HostAdapter->TargetFlags[TargetID];
3216 if (!TargetFlags->TargetExists)
3217 continue;
3218 Length +=
3219 sprintf(&Buffer[Length],
3220 " %2d Read %9u %9u %9u %9u %9u\n", TargetID,
3221 TargetStatistics[TargetID].ReadCommandSizeBuckets[0],
3222 TargetStatistics[TargetID].ReadCommandSizeBuckets[1], TargetStatistics[TargetID].ReadCommandSizeBuckets[2], TargetStatistics[TargetID].ReadCommandSizeBuckets[3], TargetStatistics[TargetID].ReadCommandSizeBuckets[4]);
3223 Length +=
3224 sprintf(&Buffer[Length],
3225 " %2d Write %9u %9u %9u %9u %9u\n", TargetID,
3226 TargetStatistics[TargetID].WriteCommandSizeBuckets[0],
3227 TargetStatistics[TargetID].WriteCommandSizeBuckets[1], TargetStatistics[TargetID].WriteCommandSizeBuckets[2], TargetStatistics[TargetID].WriteCommandSizeBuckets[3], TargetStatistics[TargetID].WriteCommandSizeBuckets[4]);
3228 }
3229 Length += sprintf(&Buffer[Length], "\n\
3230Target Command 16-32KB 32-64KB 64-128KB 128-256KB 256KB+\n\
3231====== ======= ========= ========= ========= ========= =========\n");
3232 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) {
3233 struct BusLogic_TargetFlags *TargetFlags = &HostAdapter->TargetFlags[TargetID];
3234 if (!TargetFlags->TargetExists)
3235 continue;
3236 Length +=
3237 sprintf(&Buffer[Length],
3238 " %2d Read %9u %9u %9u %9u %9u\n", TargetID,
3239 TargetStatistics[TargetID].ReadCommandSizeBuckets[5],
3240 TargetStatistics[TargetID].ReadCommandSizeBuckets[6], TargetStatistics[TargetID].ReadCommandSizeBuckets[7], TargetStatistics[TargetID].ReadCommandSizeBuckets[8], TargetStatistics[TargetID].ReadCommandSizeBuckets[9]);
3241 Length +=
3242 sprintf(&Buffer[Length],
3243 " %2d Write %9u %9u %9u %9u %9u\n", TargetID,
3244 TargetStatistics[TargetID].WriteCommandSizeBuckets[5],
3245 TargetStatistics[TargetID].WriteCommandSizeBuckets[6], TargetStatistics[TargetID].WriteCommandSizeBuckets[7], TargetStatistics[TargetID].WriteCommandSizeBuckets[8], TargetStatistics[TargetID].WriteCommandSizeBuckets[9]);
3246 }
3247 Length += sprintf(&Buffer[Length], "\n\n\
3248 ERROR RECOVERY STATISTICS\n\
3249\n\
3250 Command Aborts Bus Device Resets Host Adapter Resets\n\
3251Target Requested Completed Requested Completed Requested Completed\n\
3252 ID \\\\\\\\ Attempted //// \\\\\\\\ Attempted //// \\\\\\\\ Attempted ////\n\
3253====== ===== ===== ===== ===== ===== ===== ===== ===== =====\n");
3254 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) {
3255 struct BusLogic_TargetFlags *TargetFlags = &HostAdapter->TargetFlags[TargetID];
3256 if (!TargetFlags->TargetExists)
3257 continue;
3258 Length += sprintf(&Buffer[Length], "\
3259 %2d %5d %5d %5d %5d %5d %5d %5d %5d %5d\n", TargetID, TargetStatistics[TargetID].CommandAbortsRequested, TargetStatistics[TargetID].CommandAbortsAttempted, TargetStatistics[TargetID].CommandAbortsCompleted, TargetStatistics[TargetID].BusDeviceResetsRequested, TargetStatistics[TargetID].BusDeviceResetsAttempted, TargetStatistics[TargetID].BusDeviceResetsCompleted, TargetStatistics[TargetID].HostAdapterResetsRequested, TargetStatistics[TargetID].HostAdapterResetsAttempted, TargetStatistics[TargetID].HostAdapterResetsCompleted);
3260 }
3261 Length += sprintf(&Buffer[Length], "\nExternal Host Adapter Resets: %d\n", HostAdapter->ExternalHostAdapterResets);
3262 Length += sprintf(&Buffer[Length], "Host Adapter Internal Errors: %d\n", HostAdapter->HostAdapterInternalErrors);
3263 if (Length >= BusLogic_MessageBufferSize)
3264 BusLogic_Error("Message Buffer length %d exceeds size %d\n", HostAdapter, Length, BusLogic_MessageBufferSize);
3265 if ((Length -= Offset) <= 0)
3266 return 0;
3267 if (Length >= BytesAvailable)
3268 Length = BytesAvailable;
3269 memcpy(ProcBuffer, HostAdapter->MessageBuffer + Offset, Length);
3270 *StartPointer = ProcBuffer;
3271 return Length;
3272}
3273
3274
3275/*
3276 BusLogic_Message prints Driver Messages.
3277*/
3278
3279static void BusLogic_Message(enum BusLogic_MessageLevel MessageLevel, char *Format, struct BusLogic_HostAdapter *HostAdapter, ...)
3280{
3281 static char Buffer[BusLogic_LineBufferSize];
3282 static boolean BeginningOfLine = true;
3283 va_list Arguments;
3284 int Length = 0;
3285 va_start(Arguments, HostAdapter);
3286 Length = vsprintf(Buffer, Format, Arguments);
3287 va_end(Arguments);
3288 if (MessageLevel == BusLogic_AnnounceLevel) {
3289 static int AnnouncementLines = 0;
3290 strcpy(&HostAdapter->MessageBuffer[HostAdapter->MessageBufferLength], Buffer);
3291 HostAdapter->MessageBufferLength += Length;
3292 if (++AnnouncementLines <= 2)
3293 printk("%sscsi: %s", BusLogic_MessageLevelMap[MessageLevel], Buffer);
3294 } else if (MessageLevel == BusLogic_InfoLevel) {
3295 strcpy(&HostAdapter->MessageBuffer[HostAdapter->MessageBufferLength], Buffer);
3296 HostAdapter->MessageBufferLength += Length;
3297 if (BeginningOfLine) {
3298 if (Buffer[0] != '\n' || Length > 1)
3299 printk("%sscsi%d: %s", BusLogic_MessageLevelMap[MessageLevel], HostAdapter->HostNumber, Buffer);
3300 } else
3301 printk("%s", Buffer);
3302 } else {
3303 if (BeginningOfLine) {
3304 if (HostAdapter != NULL && HostAdapter->HostAdapterInitialized)
3305 printk("%sscsi%d: %s", BusLogic_MessageLevelMap[MessageLevel], HostAdapter->HostNumber, Buffer);
3306 else
3307 printk("%s%s", BusLogic_MessageLevelMap[MessageLevel], Buffer);
3308 } else
3309 printk("%s", Buffer);
3310 }
3311 BeginningOfLine = (Buffer[Length - 1] == '\n');
3312}
3313
3314
3315/*
3316 BusLogic_ParseKeyword parses an individual option keyword. It returns true
3317 and updates the pointer if the keyword is recognized and false otherwise.
3318*/
3319
3320static boolean __init BusLogic_ParseKeyword(char **StringPointer, char *Keyword)
3321{
3322 char *Pointer = *StringPointer;
3323 while (*Keyword != '\0') {
3324 char StringChar = *Pointer++;
3325 char KeywordChar = *Keyword++;
3326 if (StringChar >= 'A' && StringChar <= 'Z')
3327 StringChar += 'a' - 'Z';
3328 if (KeywordChar >= 'A' && KeywordChar <= 'Z')
3329 KeywordChar += 'a' - 'Z';
3330 if (StringChar != KeywordChar)
3331 return false;
3332 }
3333 *StringPointer = Pointer;
3334 return true;
3335}
3336
3337
3338/*
3339 BusLogic_ParseDriverOptions handles processing of BusLogic Driver Options
3340 specifications.
3341
3342 BusLogic Driver Options may be specified either via the Linux Kernel Command
3343 Line or via the Loadable Kernel Module Installation Facility. Driver Options
3344 for multiple host adapters may be specified either by separating the option
3345 strings by a semicolon, or by specifying multiple "BusLogic=" strings on the
3346 command line. Individual option specifications for a single host adapter are
3347 separated by commas. The Probing and Debugging Options apply to all host
3348 adapters whereas the remaining options apply individually only to the
3349 selected host adapter.
3350
3351 The BusLogic Driver Probing Options are described in
3352 <file:Documentation/scsi/BusLogic.txt>.
3353*/
3354
3355static int __init BusLogic_ParseDriverOptions(char *OptionsString)
3356{
3357 while (true) {
3358 struct BusLogic_DriverOptions *DriverOptions = &BusLogic_DriverOptions[BusLogic_DriverOptionsCount++];
3359 int TargetID;
3360 memset(DriverOptions, 0, sizeof(struct BusLogic_DriverOptions));
3361 while (*OptionsString != '\0' && *OptionsString != ';') {
3362 /* Probing Options. */
3363 if (BusLogic_ParseKeyword(&OptionsString, "IO:")) {
3364 unsigned long IO_Address = simple_strtoul(OptionsString, &OptionsString, 0);
3365 BusLogic_ProbeOptions.LimitedProbeISA = true;
3366 switch (IO_Address) {
3367 case 0x330:
3368 BusLogic_ProbeOptions.Probe330 = true;
3369 break;
3370 case 0x334:
3371 BusLogic_ProbeOptions.Probe334 = true;
3372 break;
3373 case 0x230:
3374 BusLogic_ProbeOptions.Probe230 = true;
3375 break;
3376 case 0x234:
3377 BusLogic_ProbeOptions.Probe234 = true;
3378 break;
3379 case 0x130:
3380 BusLogic_ProbeOptions.Probe130 = true;
3381 break;
3382 case 0x134:
3383 BusLogic_ProbeOptions.Probe134 = true;
3384 break;
3385 default:
3386 BusLogic_Error("BusLogic: Invalid Driver Options " "(invalid I/O Address 0x%X)\n", NULL, IO_Address);
3387 return 0;
3388 }
3389 } else if (BusLogic_ParseKeyword(&OptionsString, "NoProbeISA"))
3390 BusLogic_ProbeOptions.NoProbeISA = true;
3391 else if (BusLogic_ParseKeyword(&OptionsString, "NoProbePCI"))
3392 BusLogic_ProbeOptions.NoProbePCI = true;
3393 else if (BusLogic_ParseKeyword(&OptionsString, "NoProbe"))
3394 BusLogic_ProbeOptions.NoProbe = true;
3395 else if (BusLogic_ParseKeyword(&OptionsString, "NoSortPCI"))
3396 BusLogic_ProbeOptions.NoSortPCI = true;
3397 else if (BusLogic_ParseKeyword(&OptionsString, "MultiMasterFirst"))
3398 BusLogic_ProbeOptions.MultiMasterFirst = true;
3399 else if (BusLogic_ParseKeyword(&OptionsString, "FlashPointFirst"))
3400 BusLogic_ProbeOptions.FlashPointFirst = true;
3401 /* Tagged Queuing Options. */
3402 else if (BusLogic_ParseKeyword(&OptionsString, "QueueDepth:[") || BusLogic_ParseKeyword(&OptionsString, "QD:[")) {
3403 for (TargetID = 0; TargetID < BusLogic_MaxTargetDevices; TargetID++) {
3404 unsigned short QueueDepth = simple_strtoul(OptionsString, &OptionsString, 0);
3405 if (QueueDepth > BusLogic_MaxTaggedQueueDepth) {
3406 BusLogic_Error("BusLogic: Invalid Driver Options " "(invalid Queue Depth %d)\n", NULL, QueueDepth);
3407 return 0;
3408 }
3409 DriverOptions->QueueDepth[TargetID] = QueueDepth;
3410 if (*OptionsString == ',')
3411 OptionsString++;
3412 else if (*OptionsString == ']')
3413 break;
3414 else {
3415 BusLogic_Error("BusLogic: Invalid Driver Options " "(',' or ']' expected at '%s')\n", NULL, OptionsString);
3416 return 0;
3417 }
3418 }
3419 if (*OptionsString != ']') {
3420 BusLogic_Error("BusLogic: Invalid Driver Options " "(']' expected at '%s')\n", NULL, OptionsString);
3421 return 0;
3422 } else
3423 OptionsString++;
3424 } else if (BusLogic_ParseKeyword(&OptionsString, "QueueDepth:") || BusLogic_ParseKeyword(&OptionsString, "QD:")) {
3425 unsigned short QueueDepth = simple_strtoul(OptionsString, &OptionsString, 0);
3426 if (QueueDepth == 0 || QueueDepth > BusLogic_MaxTaggedQueueDepth) {
3427 BusLogic_Error("BusLogic: Invalid Driver Options " "(invalid Queue Depth %d)\n", NULL, QueueDepth);
3428 return 0;
3429 }
3430 DriverOptions->CommonQueueDepth = QueueDepth;
3431 for (TargetID = 0; TargetID < BusLogic_MaxTargetDevices; TargetID++)
3432 DriverOptions->QueueDepth[TargetID] = QueueDepth;
3433 } else if (BusLogic_ParseKeyword(&OptionsString, "TaggedQueuing:") || BusLogic_ParseKeyword(&OptionsString, "TQ:")) {
3434 if (BusLogic_ParseKeyword(&OptionsString, "Default")) {
3435 DriverOptions->TaggedQueuingPermitted = 0x0000;
3436 DriverOptions->TaggedQueuingPermittedMask = 0x0000;
3437 } else if (BusLogic_ParseKeyword(&OptionsString, "Enable")) {
3438 DriverOptions->TaggedQueuingPermitted = 0xFFFF;
3439 DriverOptions->TaggedQueuingPermittedMask = 0xFFFF;
3440 } else if (BusLogic_ParseKeyword(&OptionsString, "Disable")) {
3441 DriverOptions->TaggedQueuingPermitted = 0x0000;
3442 DriverOptions->TaggedQueuingPermittedMask = 0xFFFF;
3443 } else {
3444 unsigned short TargetBit;
3445 for (TargetID = 0, TargetBit = 1; TargetID < BusLogic_MaxTargetDevices; TargetID++, TargetBit <<= 1)
3446 switch (*OptionsString++) {
3447 case 'Y':
3448 DriverOptions->TaggedQueuingPermitted |= TargetBit;
3449 DriverOptions->TaggedQueuingPermittedMask |= TargetBit;
3450 break;
3451 case 'N':
3452 DriverOptions->TaggedQueuingPermitted &= ~TargetBit;
3453 DriverOptions->TaggedQueuingPermittedMask |= TargetBit;
3454 break;
3455 case 'X':
3456 break;
3457 default:
3458 OptionsString--;
3459 TargetID = BusLogic_MaxTargetDevices;
3460 break;
3461 }
3462 }
3463 }
3464 /* Miscellaneous Options. */
3465 else if (BusLogic_ParseKeyword(&OptionsString, "BusSettleTime:") || BusLogic_ParseKeyword(&OptionsString, "BST:")) {
3466 unsigned short BusSettleTime = simple_strtoul(OptionsString, &OptionsString, 0);
3467 if (BusSettleTime > 5 * 60) {
3468 BusLogic_Error("BusLogic: Invalid Driver Options " "(invalid Bus Settle Time %d)\n", NULL, BusSettleTime);
3469 return 0;
3470 }
3471 DriverOptions->BusSettleTime = BusSettleTime;
3472 } else if (BusLogic_ParseKeyword(&OptionsString, "InhibitTargetInquiry"))
3473 DriverOptions->LocalOptions.InhibitTargetInquiry = true;
3474 /* Debugging Options. */
3475 else if (BusLogic_ParseKeyword(&OptionsString, "TraceProbe"))
3476 BusLogic_GlobalOptions.TraceProbe = true;
3477 else if (BusLogic_ParseKeyword(&OptionsString, "TraceHardwareReset"))
3478 BusLogic_GlobalOptions.TraceHardwareReset = true;
3479 else if (BusLogic_ParseKeyword(&OptionsString, "TraceConfiguration"))
3480 BusLogic_GlobalOptions.TraceConfiguration = true;
3481 else if (BusLogic_ParseKeyword(&OptionsString, "TraceErrors"))
3482 BusLogic_GlobalOptions.TraceErrors = true;
3483 else if (BusLogic_ParseKeyword(&OptionsString, "Debug")) {
3484 BusLogic_GlobalOptions.TraceProbe = true;
3485 BusLogic_GlobalOptions.TraceHardwareReset = true;
3486 BusLogic_GlobalOptions.TraceConfiguration = true;
3487 BusLogic_GlobalOptions.TraceErrors = true;
3488 }
3489 if (*OptionsString == ',')
3490 OptionsString++;
3491 else if (*OptionsString != ';' && *OptionsString != '\0') {
3492 BusLogic_Error("BusLogic: Unexpected Driver Option '%s' " "ignored\n", NULL, OptionsString);
3493 *OptionsString = '\0';
3494 }
3495 }
3496 if (!(BusLogic_DriverOptionsCount == 0 || BusLogic_ProbeInfoCount == 0 || BusLogic_DriverOptionsCount == BusLogic_ProbeInfoCount)) {
3497 BusLogic_Error("BusLogic: Invalid Driver Options " "(all or no I/O Addresses must be specified)\n", NULL);
3498 return 0;
3499 }
3500 /*
3501 Tagged Queuing is disabled when the Queue Depth is 1 since queuing
3502 multiple commands is not possible.
3503 */
3504 for (TargetID = 0; TargetID < BusLogic_MaxTargetDevices; TargetID++)
3505 if (DriverOptions->QueueDepth[TargetID] == 1) {
3506 unsigned short TargetBit = 1 << TargetID;
3507 DriverOptions->TaggedQueuingPermitted &= ~TargetBit;
3508 DriverOptions->TaggedQueuingPermittedMask |= TargetBit;
3509 }
3510 if (*OptionsString == ';')
3511 OptionsString++;
3512 if (*OptionsString == '\0')
3513 return 0;
3514 }
3515 return 1;
3516}
3517
3518/*
3519 Get it all started
3520*/
3521
3522static struct scsi_host_template Bus_Logic_template = {
3523 .module = THIS_MODULE,
3524 .proc_name = "BusLogic",
3525 .proc_info = BusLogic_ProcDirectoryInfo,
3526 .name = "BusLogic",
3527 .info = BusLogic_DriverInfo,
3528 .queuecommand = BusLogic_QueueCommand,
3529 .slave_configure = BusLogic_SlaveConfigure,
3530 .bios_param = BusLogic_BIOSDiskParameters,
3531 .eh_host_reset_handler = BusLogic_host_reset,
3532#if 0
3533 .eh_abort_handler = BusLogic_AbortCommand,
3534#endif
3535 .unchecked_isa_dma = 1,
3536 .max_sectors = 128,
3537 .use_clustering = ENABLE_CLUSTERING,
3538};
3539
3540/*
3541 BusLogic_Setup handles processing of Kernel Command Line Arguments.
3542*/
3543
3544static int __init BusLogic_Setup(char *str)
3545{
3546 int ints[3];
3547
3548 (void) get_options(str, ARRAY_SIZE(ints), ints);
3549
3550 if (ints[0] != 0) {
3551 BusLogic_Error("BusLogic: Obsolete Command Line Entry " "Format Ignored\n", NULL);
3552 return 0;
3553 }
3554 if (str == NULL || *str == '\0')
3555 return 0;
3556 return BusLogic_ParseDriverOptions(str);
3557}
3558
3559/*
3560 * Exit function. Deletes all hosts associated with this driver.
3561 */
3562
3563static void __exit BusLogic_exit(void)
3564{
3565 struct BusLogic_HostAdapter *ha, *next;
3566
3567 list_for_each_entry_safe(ha, next, &BusLogic_host_list, host_list)
3568 BusLogic_ReleaseHostAdapter(ha);
3569}
3570
3571__setup("BusLogic=", BusLogic_Setup);
3572
3573module_init(BusLogic_init);
3574module_exit(BusLogic_exit);