blob: abbe206474f58ce2ff1de53e274d6df7158b92f4 [file] [log] [blame]
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +11001/*
2 * Windfarm PowerMac thermal control. iMac G5
3 *
4 * (c) Copyright 2005 Benjamin Herrenschmidt, IBM Corp.
5 * <benh@kernel.crashing.org>
6 *
7 * Released under the term of the GNU GPL v2.
8 *
9 * The algorithm used is the PID control algorithm, used the same
10 * way the published Darwin code does, using the same values that
11 * are present in the Darwin 8.2 snapshot property lists (note however
12 * that none of the code has been re-used, it's a complete re-implementation
13 *
14 * The various control loops found in Darwin config file are:
15 *
16 * PowerMac8,1 and PowerMac8,2
17 * ===========================
18 *
19 * System Fans control loop. Different based on models. In addition to the
20 * usual PID algorithm, the control loop gets 2 additional pairs of linear
21 * scaling factors (scale/offsets) expressed as 4.12 fixed point values
22 * signed offset, unsigned scale)
23 *
24 * The targets are modified such as:
25 * - the linked control (second control) gets the target value as-is
26 * (typically the drive fan)
27 * - the main control (first control) gets the target value scaled with
28 * the first pair of factors, and is then modified as below
Adrian Bunk943ffb52006-01-10 00:10:13 +010029 * - the value of the target of the CPU Fan control loop is retrieved,
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +110030 * scaled with the second pair of factors, and the max of that and
31 * the scaled target is applied to the main control.
32 *
33 * # model_id: 2
34 * controls : system-fan, drive-bay-fan
35 * sensors : hd-temp
36 * PID params : G_d = 0x15400000
37 * G_p = 0x00200000
38 * G_r = 0x000002fd
39 * History = 2 entries
40 * Input target = 0x3a0000
41 * Interval = 5s
42 * linear-factors : offset = 0xff38 scale = 0x0ccd
43 * offset = 0x0208 scale = 0x07ae
44 *
45 * # model_id: 3
46 * controls : system-fan, drive-bay-fan
47 * sensors : hd-temp
48 * PID params : G_d = 0x08e00000
49 * G_p = 0x00566666
50 * G_r = 0x0000072b
51 * History = 2 entries
52 * Input target = 0x350000
53 * Interval = 5s
54 * linear-factors : offset = 0xff38 scale = 0x0ccd
55 * offset = 0x0000 scale = 0x0000
56 *
57 * # model_id: 5
58 * controls : system-fan
59 * sensors : hd-temp
60 * PID params : G_d = 0x15400000
61 * G_p = 0x00233333
62 * G_r = 0x000002fd
63 * History = 2 entries
64 * Input target = 0x3a0000
65 * Interval = 5s
66 * linear-factors : offset = 0x0000 scale = 0x1000
67 * offset = 0x0091 scale = 0x0bae
68 *
69 * CPU Fan control loop. The loop is identical for all models. it
70 * has an additional pair of scaling factor. This is used to scale the
71 * systems fan control loop target result (the one before it gets scaled
72 * by the System Fans control loop itself). Then, the max value of the
73 * calculated target value and system fan value is sent to the fans
74 *
75 * controls : cpu-fan
76 * sensors : cpu-temp cpu-power
77 * PID params : From SMU sdb partition
78 * linear-factors : offset = 0xfb50 scale = 0x1000
79 *
80 * CPU Slew control loop. Not implemented. The cpufreq driver in linux is
81 * completely separate for now, though we could find a way to link it, either
82 * as a client reacting to overtemp notifications, or directling monitoring
83 * the CPU temperature
84 *
85 * WARNING ! The CPU control loop requires the CPU tmax for the current
86 * operating point. However, we currently are completely separated from
87 * the cpufreq driver and thus do not know what the current operating
88 * point is. Fortunately, we also do not have any hardware supporting anything
89 * but operating point 0 at the moment, thus we just peek that value directly
90 * from the SDB partition. If we ever end up with actually slewing the system
91 * clock and thus changing operating points, we'll have to find a way to
92 * communicate with the CPU freq driver;
93 *
94 */
95
96#include <linux/types.h>
97#include <linux/errno.h>
98#include <linux/kernel.h>
99#include <linux/delay.h>
100#include <linux/slab.h>
101#include <linux/init.h>
102#include <linux/spinlock.h>
103#include <linux/wait.h>
104#include <linux/kmod.h>
105#include <linux/device.h>
106#include <linux/platform_device.h>
107#include <asm/prom.h>
108#include <asm/machdep.h>
109#include <asm/io.h>
110#include <asm/system.h>
111#include <asm/sections.h>
112#include <asm/smu.h>
113
114#include "windfarm.h"
115#include "windfarm_pid.h"
116
117#define VERSION "0.4"
118
119#undef DEBUG
120
121#ifdef DEBUG
122#define DBG(args...) printk(args)
123#else
124#define DBG(args...) do { } while(0)
125#endif
126
127/* define this to force CPU overtemp to 74 degree, useful for testing
128 * the overtemp code
129 */
130#undef HACKED_OVERTEMP
131
132static int wf_smu_mach_model; /* machine model id */
133
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100134/* Controls & sensors */
135static struct wf_sensor *sensor_cpu_power;
136static struct wf_sensor *sensor_cpu_temp;
137static struct wf_sensor *sensor_hd_temp;
138static struct wf_control *fan_cpu_main;
139static struct wf_control *fan_hd;
140static struct wf_control *fan_system;
141static struct wf_control *cpufreq_clamp;
142
143/* Set to kick the control loop into life */
144static int wf_smu_all_controls_ok, wf_smu_all_sensors_ok, wf_smu_started;
145
146/* Failure handling.. could be nicer */
147#define FAILURE_FAN 0x01
148#define FAILURE_SENSOR 0x02
149#define FAILURE_OVERTEMP 0x04
150
151static unsigned int wf_smu_failure_state;
152static int wf_smu_readjust, wf_smu_skipping;
153
154/*
155 * ****** System Fans Control Loop ******
156 *
157 */
158
159/* Parameters for the System Fans control loop. Parameters
160 * not in this table such as interval, history size, ...
161 * are common to all versions and thus hard coded for now.
162 */
163struct wf_smu_sys_fans_param {
164 int model_id;
165 s32 itarget;
166 s32 gd, gp, gr;
167
168 s16 offset0;
169 u16 scale0;
170 s16 offset1;
171 u16 scale1;
172};
173
174#define WF_SMU_SYS_FANS_INTERVAL 5
175#define WF_SMU_SYS_FANS_HISTORY_SIZE 2
176
177/* State data used by the system fans control loop
178 */
179struct wf_smu_sys_fans_state {
180 int ticks;
181 s32 sys_setpoint;
182 s32 hd_setpoint;
183 s16 offset0;
184 u16 scale0;
185 s16 offset1;
186 u16 scale1;
187 struct wf_pid_state pid;
188};
189
190/*
191 * Configs for SMU Sytem Fan control loop
192 */
193static struct wf_smu_sys_fans_param wf_smu_sys_all_params[] = {
194 /* Model ID 2 */
195 {
196 .model_id = 2,
197 .itarget = 0x3a0000,
198 .gd = 0x15400000,
199 .gp = 0x00200000,
200 .gr = 0x000002fd,
201 .offset0 = 0xff38,
202 .scale0 = 0x0ccd,
203 .offset1 = 0x0208,
204 .scale1 = 0x07ae,
205 },
206 /* Model ID 3 */
207 {
Michal Ostrowski326743e2005-12-08 16:56:17 +1100208 .model_id = 3,
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100209 .itarget = 0x350000,
210 .gd = 0x08e00000,
211 .gp = 0x00566666,
212 .gr = 0x0000072b,
213 .offset0 = 0xff38,
214 .scale0 = 0x0ccd,
215 .offset1 = 0x0000,
216 .scale1 = 0x0000,
217 },
218 /* Model ID 5 */
219 {
Michal Ostrowski326743e2005-12-08 16:56:17 +1100220 .model_id = 5,
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100221 .itarget = 0x3a0000,
222 .gd = 0x15400000,
223 .gp = 0x00233333,
224 .gr = 0x000002fd,
225 .offset0 = 0x0000,
226 .scale0 = 0x1000,
227 .offset1 = 0x0091,
228 .scale1 = 0x0bae,
229 },
230};
231#define WF_SMU_SYS_FANS_NUM_CONFIGS ARRAY_SIZE(wf_smu_sys_all_params)
232
233static struct wf_smu_sys_fans_state *wf_smu_sys_fans;
234
235/*
236 * ****** CPU Fans Control Loop ******
237 *
238 */
239
240
241#define WF_SMU_CPU_FANS_INTERVAL 1
242#define WF_SMU_CPU_FANS_MAX_HISTORY 16
243#define WF_SMU_CPU_FANS_SIBLING_SCALE 0x00001000
244#define WF_SMU_CPU_FANS_SIBLING_OFFSET 0xfffffb50
245
246/* State data used by the cpu fans control loop
247 */
248struct wf_smu_cpu_fans_state {
249 int ticks;
250 s32 cpu_setpoint;
251 s32 scale;
252 s32 offset;
253 struct wf_cpu_pid_state pid;
254};
255
256static struct wf_smu_cpu_fans_state *wf_smu_cpu_fans;
257
258
259
260/*
261 * ***** Implementation *****
262 *
263 */
264
265static void wf_smu_create_sys_fans(void)
266{
267 struct wf_smu_sys_fans_param *param = NULL;
268 struct wf_pid_param pid_param;
269 int i;
270
271 /* First, locate the params for this model */
272 for (i = 0; i < WF_SMU_SYS_FANS_NUM_CONFIGS; i++)
273 if (wf_smu_sys_all_params[i].model_id == wf_smu_mach_model) {
274 param = &wf_smu_sys_all_params[i];
275 break;
276 }
277
278 /* No params found, put fans to max */
279 if (param == NULL) {
280 printk(KERN_WARNING "windfarm: System fan config not found "
281 "for this machine model, max fan speed\n");
282 goto fail;
283 }
284
285 /* Alloc & initialize state */
286 wf_smu_sys_fans = kmalloc(sizeof(struct wf_smu_sys_fans_state),
287 GFP_KERNEL);
288 if (wf_smu_sys_fans == NULL) {
289 printk(KERN_WARNING "windfarm: Memory allocation error"
290 " max fan speed\n");
291 goto fail;
292 }
293 wf_smu_sys_fans->ticks = 1;
294 wf_smu_sys_fans->scale0 = param->scale0;
295 wf_smu_sys_fans->offset0 = param->offset0;
296 wf_smu_sys_fans->scale1 = param->scale1;
297 wf_smu_sys_fans->offset1 = param->offset1;
298
299 /* Fill PID params */
300 pid_param.gd = param->gd;
301 pid_param.gp = param->gp;
302 pid_param.gr = param->gr;
303 pid_param.interval = WF_SMU_SYS_FANS_INTERVAL;
304 pid_param.history_len = WF_SMU_SYS_FANS_HISTORY_SIZE;
305 pid_param.itarget = param->itarget;
306 pid_param.min = fan_system->ops->get_min(fan_system);
307 pid_param.max = fan_system->ops->get_max(fan_system);
308 if (fan_hd) {
309 pid_param.min =
310 max(pid_param.min,fan_hd->ops->get_min(fan_hd));
311 pid_param.max =
312 min(pid_param.max,fan_hd->ops->get_max(fan_hd));
313 }
314 wf_pid_init(&wf_smu_sys_fans->pid, &pid_param);
315
316 DBG("wf: System Fan control initialized.\n");
317 DBG(" itarged=%d.%03d, min=%d RPM, max=%d RPM\n",
318 FIX32TOPRINT(pid_param.itarget), pid_param.min, pid_param.max);
319 return;
320
321 fail:
322
323 if (fan_system)
324 wf_control_set_max(fan_system);
325 if (fan_hd)
326 wf_control_set_max(fan_hd);
327}
328
329static void wf_smu_sys_fans_tick(struct wf_smu_sys_fans_state *st)
330{
331 s32 new_setpoint, temp, scaled, cputarget;
332 int rc;
333
334 if (--st->ticks != 0) {
335 if (wf_smu_readjust)
336 goto readjust;
337 return;
338 }
339 st->ticks = WF_SMU_SYS_FANS_INTERVAL;
340
341 rc = sensor_hd_temp->ops->get_value(sensor_hd_temp, &temp);
342 if (rc) {
343 printk(KERN_WARNING "windfarm: HD temp sensor error %d\n",
344 rc);
345 wf_smu_failure_state |= FAILURE_SENSOR;
346 return;
347 }
348
349 DBG("wf_smu: System Fans tick ! HD temp: %d.%03d\n",
350 FIX32TOPRINT(temp));
351
352 if (temp > (st->pid.param.itarget + 0x50000))
353 wf_smu_failure_state |= FAILURE_OVERTEMP;
354
355 new_setpoint = wf_pid_run(&st->pid, temp);
356
357 DBG("wf_smu: new_setpoint: %d RPM\n", (int)new_setpoint);
358
359 scaled = ((((s64)new_setpoint) * (s64)st->scale0) >> 12) + st->offset0;
360
361 DBG("wf_smu: scaled setpoint: %d RPM\n", (int)scaled);
362
363 cputarget = wf_smu_cpu_fans ? wf_smu_cpu_fans->pid.target : 0;
364 cputarget = ((((s64)cputarget) * (s64)st->scale1) >> 12) + st->offset1;
365 scaled = max(scaled, cputarget);
366 scaled = max(scaled, st->pid.param.min);
367 scaled = min(scaled, st->pid.param.max);
368
369 DBG("wf_smu: adjusted setpoint: %d RPM\n", (int)scaled);
370
371 if (st->sys_setpoint == scaled && new_setpoint == st->hd_setpoint)
372 return;
373 st->sys_setpoint = scaled;
374 st->hd_setpoint = new_setpoint;
375 readjust:
376 if (fan_system && wf_smu_failure_state == 0) {
377 rc = fan_system->ops->set_value(fan_system, st->sys_setpoint);
378 if (rc) {
379 printk(KERN_WARNING "windfarm: Sys fan error %d\n",
380 rc);
381 wf_smu_failure_state |= FAILURE_FAN;
382 }
383 }
384 if (fan_hd && wf_smu_failure_state == 0) {
385 rc = fan_hd->ops->set_value(fan_hd, st->hd_setpoint);
386 if (rc) {
387 printk(KERN_WARNING "windfarm: HD fan error %d\n",
388 rc);
389 wf_smu_failure_state |= FAILURE_FAN;
390 }
391 }
392}
393
394static void wf_smu_create_cpu_fans(void)
395{
396 struct wf_cpu_pid_param pid_param;
Jeremy Kerr018a3d12006-07-12 15:40:29 +1000397 const struct smu_sdbp_header *hdr;
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100398 struct smu_sdbp_cpupiddata *piddata;
399 struct smu_sdbp_fvt *fvt;
400 s32 tmax, tdelta, maxpow, powadj;
401
402 /* First, locate the PID params in SMU SBD */
403 hdr = smu_get_sdb_partition(SMU_SDB_CPUPIDDATA_ID, NULL);
404 if (hdr == 0) {
405 printk(KERN_WARNING "windfarm: CPU PID fan config not found "
406 "max fan speed\n");
407 goto fail;
408 }
409 piddata = (struct smu_sdbp_cpupiddata *)&hdr[1];
410
411 /* Get the FVT params for operating point 0 (the only supported one
412 * for now) in order to get tmax
413 */
414 hdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL);
415 if (hdr) {
416 fvt = (struct smu_sdbp_fvt *)&hdr[1];
417 tmax = ((s32)fvt->maxtemp) << 16;
418 } else
419 tmax = 0x5e0000; /* 94 degree default */
420
421 /* Alloc & initialize state */
422 wf_smu_cpu_fans = kmalloc(sizeof(struct wf_smu_cpu_fans_state),
423 GFP_KERNEL);
424 if (wf_smu_cpu_fans == NULL)
425 goto fail;
426 wf_smu_cpu_fans->ticks = 1;
427
428 wf_smu_cpu_fans->scale = WF_SMU_CPU_FANS_SIBLING_SCALE;
429 wf_smu_cpu_fans->offset = WF_SMU_CPU_FANS_SIBLING_OFFSET;
430
431 /* Fill PID params */
432 pid_param.interval = WF_SMU_CPU_FANS_INTERVAL;
433 pid_param.history_len = piddata->history_len;
434 if (pid_param.history_len > WF_CPU_PID_MAX_HISTORY) {
435 printk(KERN_WARNING "windfarm: History size overflow on "
436 "CPU control loop (%d)\n", piddata->history_len);
437 pid_param.history_len = WF_CPU_PID_MAX_HISTORY;
438 }
439 pid_param.gd = piddata->gd;
440 pid_param.gp = piddata->gp;
441 pid_param.gr = piddata->gr / pid_param.history_len;
442
443 tdelta = ((s32)piddata->target_temp_delta) << 16;
444 maxpow = ((s32)piddata->max_power) << 16;
445 powadj = ((s32)piddata->power_adj) << 16;
446
447 pid_param.tmax = tmax;
448 pid_param.ttarget = tmax - tdelta;
449 pid_param.pmaxadj = maxpow - powadj;
450
451 pid_param.min = fan_cpu_main->ops->get_min(fan_cpu_main);
452 pid_param.max = fan_cpu_main->ops->get_max(fan_cpu_main);
453
454 wf_cpu_pid_init(&wf_smu_cpu_fans->pid, &pid_param);
455
456 DBG("wf: CPU Fan control initialized.\n");
457 DBG(" ttarged=%d.%03d, tmax=%d.%03d, min=%d RPM, max=%d RPM\n",
458 FIX32TOPRINT(pid_param.ttarget), FIX32TOPRINT(pid_param.tmax),
459 pid_param.min, pid_param.max);
460
461 return;
462
463 fail:
464 printk(KERN_WARNING "windfarm: CPU fan config not found\n"
465 "for this machine model, max fan speed\n");
466
467 if (cpufreq_clamp)
468 wf_control_set_max(cpufreq_clamp);
469 if (fan_cpu_main)
470 wf_control_set_max(fan_cpu_main);
471}
472
473static void wf_smu_cpu_fans_tick(struct wf_smu_cpu_fans_state *st)
474{
475 s32 new_setpoint, temp, power, systarget;
476 int rc;
477
478 if (--st->ticks != 0) {
479 if (wf_smu_readjust)
480 goto readjust;
481 return;
482 }
483 st->ticks = WF_SMU_CPU_FANS_INTERVAL;
484
485 rc = sensor_cpu_temp->ops->get_value(sensor_cpu_temp, &temp);
486 if (rc) {
487 printk(KERN_WARNING "windfarm: CPU temp sensor error %d\n",
488 rc);
489 wf_smu_failure_state |= FAILURE_SENSOR;
490 return;
491 }
492
493 rc = sensor_cpu_power->ops->get_value(sensor_cpu_power, &power);
494 if (rc) {
495 printk(KERN_WARNING "windfarm: CPU power sensor error %d\n",
496 rc);
497 wf_smu_failure_state |= FAILURE_SENSOR;
498 return;
499 }
500
501 DBG("wf_smu: CPU Fans tick ! CPU temp: %d.%03d, power: %d.%03d\n",
502 FIX32TOPRINT(temp), FIX32TOPRINT(power));
503
504#ifdef HACKED_OVERTEMP
505 if (temp > 0x4a0000)
506 wf_smu_failure_state |= FAILURE_OVERTEMP;
507#else
508 if (temp > st->pid.param.tmax)
509 wf_smu_failure_state |= FAILURE_OVERTEMP;
510#endif
511 new_setpoint = wf_cpu_pid_run(&st->pid, power, temp);
512
513 DBG("wf_smu: new_setpoint: %d RPM\n", (int)new_setpoint);
514
515 systarget = wf_smu_sys_fans ? wf_smu_sys_fans->pid.target : 0;
516 systarget = ((((s64)systarget) * (s64)st->scale) >> 12)
517 + st->offset;
518 new_setpoint = max(new_setpoint, systarget);
519 new_setpoint = max(new_setpoint, st->pid.param.min);
520 new_setpoint = min(new_setpoint, st->pid.param.max);
521
522 DBG("wf_smu: adjusted setpoint: %d RPM\n", (int)new_setpoint);
523
524 if (st->cpu_setpoint == new_setpoint)
525 return;
526 st->cpu_setpoint = new_setpoint;
527 readjust:
528 if (fan_cpu_main && wf_smu_failure_state == 0) {
529 rc = fan_cpu_main->ops->set_value(fan_cpu_main,
530 st->cpu_setpoint);
531 if (rc) {
532 printk(KERN_WARNING "windfarm: CPU main fan"
533 " error %d\n", rc);
534 wf_smu_failure_state |= FAILURE_FAN;
535 }
536 }
537}
538
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100539/*
540 * ****** Setup / Init / Misc ... ******
541 *
542 */
543
544static void wf_smu_tick(void)
545{
546 unsigned int last_failure = wf_smu_failure_state;
547 unsigned int new_failure;
548
549 if (!wf_smu_started) {
550 DBG("wf: creating control loops !\n");
551 wf_smu_create_sys_fans();
552 wf_smu_create_cpu_fans();
553 wf_smu_started = 1;
554 }
555
556 /* Skipping ticks */
557 if (wf_smu_skipping && --wf_smu_skipping)
558 return;
559
560 wf_smu_failure_state = 0;
561 if (wf_smu_sys_fans)
562 wf_smu_sys_fans_tick(wf_smu_sys_fans);
563 if (wf_smu_cpu_fans)
564 wf_smu_cpu_fans_tick(wf_smu_cpu_fans);
565
566 wf_smu_readjust = 0;
567 new_failure = wf_smu_failure_state & ~last_failure;
568
569 /* If entering failure mode, clamp cpufreq and ramp all
570 * fans to full speed.
571 */
572 if (wf_smu_failure_state && !last_failure) {
573 if (cpufreq_clamp)
574 wf_control_set_max(cpufreq_clamp);
575 if (fan_system)
576 wf_control_set_max(fan_system);
577 if (fan_cpu_main)
578 wf_control_set_max(fan_cpu_main);
579 if (fan_hd)
580 wf_control_set_max(fan_hd);
581 }
582
583 /* If leaving failure mode, unclamp cpufreq and readjust
584 * all fans on next iteration
585 */
586 if (!wf_smu_failure_state && last_failure) {
587 if (cpufreq_clamp)
588 wf_control_set_min(cpufreq_clamp);
589 wf_smu_readjust = 1;
590 }
591
592 /* Overtemp condition detected, notify and start skipping a couple
593 * ticks to let the temperature go down
594 */
595 if (new_failure & FAILURE_OVERTEMP) {
596 wf_set_overtemp();
597 wf_smu_skipping = 2;
598 }
599
600 /* We only clear the overtemp condition if overtemp is cleared
601 * _and_ no other failure is present. Since a sensor error will
602 * clear the overtemp condition (can't measure temperature) at
603 * the control loop levels, but we don't want to keep it clear
604 * here in this case
605 */
606 if (new_failure == 0 && last_failure & FAILURE_OVERTEMP)
607 wf_clear_overtemp();
608}
609
610static void wf_smu_new_control(struct wf_control *ct)
611{
612 if (wf_smu_all_controls_ok)
613 return;
614
615 if (fan_cpu_main == NULL && !strcmp(ct->name, "cpu-fan")) {
Benjamin Herrenschmidtac171c42006-02-08 16:42:51 +1100616 if (wf_get_control(ct) == 0)
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100617 fan_cpu_main = ct;
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100618 }
619
620 if (fan_system == NULL && !strcmp(ct->name, "system-fan")) {
Benjamin Herrenschmidtac171c42006-02-08 16:42:51 +1100621 if (wf_get_control(ct) == 0)
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100622 fan_system = ct;
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100623 }
624
625 if (cpufreq_clamp == NULL && !strcmp(ct->name, "cpufreq-clamp")) {
626 if (wf_get_control(ct) == 0)
627 cpufreq_clamp = ct;
628 }
629
630 /* Darwin property list says the HD fan is only for model ID
631 * 0, 1, 2 and 3
632 */
633
634 if (wf_smu_mach_model > 3) {
635 if (fan_system && fan_cpu_main && cpufreq_clamp)
636 wf_smu_all_controls_ok = 1;
637 return;
638 }
639
640 if (fan_hd == NULL && !strcmp(ct->name, "drive-bay-fan")) {
Benjamin Herrenschmidtac171c42006-02-08 16:42:51 +1100641 if (wf_get_control(ct) == 0)
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100642 fan_hd = ct;
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100643 }
644
645 if (fan_system && fan_hd && fan_cpu_main && cpufreq_clamp)
646 wf_smu_all_controls_ok = 1;
647}
648
649static void wf_smu_new_sensor(struct wf_sensor *sr)
650{
651 if (wf_smu_all_sensors_ok)
652 return;
653
654 if (sensor_cpu_power == NULL && !strcmp(sr->name, "cpu-power")) {
Benjamin Herrenschmidtac171c42006-02-08 16:42:51 +1100655 if (wf_get_sensor(sr) == 0)
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100656 sensor_cpu_power = sr;
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100657 }
658
659 if (sensor_cpu_temp == NULL && !strcmp(sr->name, "cpu-temp")) {
Benjamin Herrenschmidtac171c42006-02-08 16:42:51 +1100660 if (wf_get_sensor(sr) == 0)
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100661 sensor_cpu_temp = sr;
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100662 }
663
664 if (sensor_hd_temp == NULL && !strcmp(sr->name, "hd-temp")) {
Benjamin Herrenschmidtac171c42006-02-08 16:42:51 +1100665 if (wf_get_sensor(sr) == 0)
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100666 sensor_hd_temp = sr;
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100667 }
668
669 if (sensor_cpu_power && sensor_cpu_temp && sensor_hd_temp)
670 wf_smu_all_sensors_ok = 1;
671}
672
673
674static int wf_smu_notify(struct notifier_block *self,
675 unsigned long event, void *data)
676{
677 switch(event) {
678 case WF_EVENT_NEW_CONTROL:
679 DBG("wf: new control %s detected\n",
680 ((struct wf_control *)data)->name);
681 wf_smu_new_control(data);
682 wf_smu_readjust = 1;
683 break;
684 case WF_EVENT_NEW_SENSOR:
685 DBG("wf: new sensor %s detected\n",
686 ((struct wf_sensor *)data)->name);
687 wf_smu_new_sensor(data);
688 break;
689 case WF_EVENT_TICK:
690 if (wf_smu_all_controls_ok && wf_smu_all_sensors_ok)
691 wf_smu_tick();
692 }
693
694 return 0;
695}
696
697static struct notifier_block wf_smu_events = {
698 .notifier_call = wf_smu_notify,
699};
700
701static int wf_init_pm(void)
702{
Jeremy Kerr018a3d12006-07-12 15:40:29 +1000703 const struct smu_sdbp_header *hdr;
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100704
705 hdr = smu_get_sdb_partition(SMU_SDB_SENSORTREE_ID, NULL);
706 if (hdr != 0) {
707 struct smu_sdbp_sensortree *st =
708 (struct smu_sdbp_sensortree *)&hdr[1];
709 wf_smu_mach_model = st->model_id;
710 }
711
712 printk(KERN_INFO "windfarm: Initializing for iMacG5 model ID %d\n",
713 wf_smu_mach_model);
714
715 return 0;
716}
717
Benjamin Herrenschmidt10270612006-10-10 11:47:31 +1000718static int wf_smu_probe(struct platform_device *ddev)
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100719{
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100720 wf_register_client(&wf_smu_events);
721
722 return 0;
723}
724
Benjamin Herrenschmidt10270612006-10-10 11:47:31 +1000725static int __devexit wf_smu_remove(struct platform_device *ddev)
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100726{
727 wf_unregister_client(&wf_smu_events);
728
729 /* XXX We don't have yet a guarantee that our callback isn't
730 * in progress when returning from wf_unregister_client, so
731 * we add an arbitrary delay. I'll have to fix that in the core
732 */
733 msleep(1000);
734
735 /* Release all sensors */
736 /* One more crappy race: I don't think we have any guarantee here
737 * that the attribute callback won't race with the sensor beeing
738 * disposed of, and I'm not 100% certain what best way to deal
739 * with that except by adding locks all over... I'll do that
740 * eventually but heh, who ever rmmod this module anyway ?
741 */
Benjamin Herrenschmidtac171c42006-02-08 16:42:51 +1100742 if (sensor_cpu_power)
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100743 wf_put_sensor(sensor_cpu_power);
Benjamin Herrenschmidtac171c42006-02-08 16:42:51 +1100744 if (sensor_cpu_temp)
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100745 wf_put_sensor(sensor_cpu_temp);
Benjamin Herrenschmidtac171c42006-02-08 16:42:51 +1100746 if (sensor_hd_temp)
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100747 wf_put_sensor(sensor_hd_temp);
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100748
749 /* Release all controls */
Benjamin Herrenschmidtac171c42006-02-08 16:42:51 +1100750 if (fan_cpu_main)
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100751 wf_put_control(fan_cpu_main);
Benjamin Herrenschmidtac171c42006-02-08 16:42:51 +1100752 if (fan_hd)
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100753 wf_put_control(fan_hd);
Benjamin Herrenschmidtac171c42006-02-08 16:42:51 +1100754 if (fan_system)
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100755 wf_put_control(fan_system);
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100756 if (cpufreq_clamp)
757 wf_put_control(cpufreq_clamp);
758
759 /* Destroy control loops state structures */
760 if (wf_smu_sys_fans)
761 kfree(wf_smu_sys_fans);
762 if (wf_smu_cpu_fans)
763 kfree(wf_smu_cpu_fans);
764
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100765 return 0;
766}
767
Benjamin Herrenschmidt10270612006-10-10 11:47:31 +1000768static struct platform_driver wf_smu_driver = {
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100769 .probe = wf_smu_probe,
Benjamin Herrenschmidt10270612006-10-10 11:47:31 +1000770 .remove = __devexit_p(wf_smu_remove),
771 .driver = {
772 .name = "windfarm",
Kay Sievers23386fe2008-04-18 13:33:53 -0700773 .owner = THIS_MODULE,
Benjamin Herrenschmidt10270612006-10-10 11:47:31 +1000774 },
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100775};
776
777
778static int __init wf_smu_init(void)
779{
780 int rc = -ENODEV;
781
782 if (machine_is_compatible("PowerMac8,1") ||
783 machine_is_compatible("PowerMac8,2"))
784 rc = wf_init_pm();
785
786 if (rc == 0) {
787#ifdef MODULE
788 request_module("windfarm_smu_controls");
789 request_module("windfarm_smu_sensors");
790 request_module("windfarm_lm75_sensor");
Benjamin Herrenschmidtd31e8172006-11-16 14:00:57 +1100791 request_module("windfarm_cpufreq_clamp");
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100792
793#endif /* MODULE */
Benjamin Herrenschmidt10270612006-10-10 11:47:31 +1000794 platform_driver_register(&wf_smu_driver);
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100795 }
796
797 return rc;
798}
799
800static void __exit wf_smu_exit(void)
801{
802
Benjamin Herrenschmidt10270612006-10-10 11:47:31 +1000803 platform_driver_unregister(&wf_smu_driver);
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100804}
805
806
807module_init(wf_smu_init);
808module_exit(wf_smu_exit);
809
810MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
811MODULE_DESCRIPTION("Thermal control logic for iMac G5");
812MODULE_LICENSE("GPL");
Kay Sievers23386fe2008-04-18 13:33:53 -0700813MODULE_ALIAS("platform:windfarm");