blob: 3eda2dd577137f2a8d86b0d21599beb8fb5cf48d [file] [log] [blame]
James Ban1028a372014-07-14 13:48:45 +09001/*
James Ban005547e2014-08-08 14:27:04 +09002 * da9211-regulator.c - Regulator device driver for DA9211/DA9213
James Ban1028a372014-07-14 13:48:45 +09003 * Copyright (C) 2014 Dialog Semiconductor Ltd.
4 *
5 * This library is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU Library General Public
7 * License as published by the Free Software Foundation; either
8 * version 2 of the License, or (at your option) any later version.
9 *
10 * This library is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13 * Library General Public License for more details.
14 */
15
16#include <linux/err.h>
17#include <linux/gpio.h>
18#include <linux/i2c.h>
19#include <linux/module.h>
20#include <linux/init.h>
21#include <linux/slab.h>
22#include <linux/regulator/driver.h>
23#include <linux/regulator/machine.h>
24#include <linux/regmap.h>
25#include <linux/irq.h>
26#include <linux/interrupt.h>
James Ban8c7dd8b2015-01-28 09:28:08 +090027#include <linux/of_gpio.h>
James Banbf3baca2014-08-27 11:47:07 +090028#include <linux/regulator/of_regulator.h>
James Ban1028a372014-07-14 13:48:45 +090029#include <linux/regulator/da9211.h>
30#include "da9211-regulator.h"
31
James Ban005547e2014-08-08 14:27:04 +090032/* DEVICE IDs */
33#define DA9211_DEVICE_ID 0x22
34#define DA9213_DEVICE_ID 0x23
35
James Ban1028a372014-07-14 13:48:45 +090036#define DA9211_BUCK_MODE_SLEEP 1
37#define DA9211_BUCK_MODE_SYNC 2
38#define DA9211_BUCK_MODE_AUTO 3
39
40/* DA9211 REGULATOR IDs */
41#define DA9211_ID_BUCKA 0
42#define DA9211_ID_BUCKB 1
43
44struct da9211 {
45 struct device *dev;
46 struct regmap *regmap;
47 struct da9211_pdata *pdata;
48 struct regulator_dev *rdev[DA9211_MAX_REGULATORS];
49 int num_regulator;
50 int chip_irq;
James Ban005547e2014-08-08 14:27:04 +090051 int chip_id;
James Ban1028a372014-07-14 13:48:45 +090052};
53
54static const struct regmap_range_cfg da9211_regmap_range[] = {
55 {
56 .selector_reg = DA9211_REG_PAGE_CON,
57 .selector_mask = DA9211_REG_PAGE_MASK,
58 .selector_shift = DA9211_REG_PAGE_SHIFT,
59 .window_start = 0,
60 .window_len = 256,
61 .range_min = 0,
James Ban005547e2014-08-08 14:27:04 +090062 .range_max = 5*128,
James Ban1028a372014-07-14 13:48:45 +090063 },
64};
65
66static const struct regmap_config da9211_regmap_config = {
67 .reg_bits = 8,
68 .val_bits = 8,
James Ban005547e2014-08-08 14:27:04 +090069 .max_register = 5 * 128,
James Ban1028a372014-07-14 13:48:45 +090070 .ranges = da9211_regmap_range,
71 .num_ranges = ARRAY_SIZE(da9211_regmap_range),
72};
73
74/* Default limits measured in millivolts and milliamps */
75#define DA9211_MIN_MV 300
76#define DA9211_MAX_MV 1570
77#define DA9211_STEP_MV 10
78
James Ban005547e2014-08-08 14:27:04 +090079/* Current limits for DA9211 buck (uA) indices
80 * corresponds with register values
81 */
James Ban1028a372014-07-14 13:48:45 +090082static const int da9211_current_limits[] = {
83 2000000, 2200000, 2400000, 2600000, 2800000, 3000000, 3200000, 3400000,
84 3600000, 3800000, 4000000, 4200000, 4400000, 4600000, 4800000, 5000000
85};
James Ban005547e2014-08-08 14:27:04 +090086/* Current limits for DA9213 buck (uA) indices
87 * corresponds with register values
88 */
89static const int da9213_current_limits[] = {
90 3000000, 3200000, 3400000, 3600000, 3800000, 4000000, 4200000, 4400000,
91 4600000, 4800000, 5000000, 5200000, 5400000, 5600000, 5800000, 6000000
92};
James Ban1028a372014-07-14 13:48:45 +090093
94static unsigned int da9211_buck_get_mode(struct regulator_dev *rdev)
95{
96 int id = rdev_get_id(rdev);
97 struct da9211 *chip = rdev_get_drvdata(rdev);
98 unsigned int data;
99 int ret, mode = 0;
100
101 ret = regmap_read(chip->regmap, DA9211_REG_BUCKA_CONF+id, &data);
102 if (ret < 0)
103 return ret;
104
105 switch (data & 0x03) {
106 case DA9211_BUCK_MODE_SYNC:
107 mode = REGULATOR_MODE_FAST;
108 break;
109 case DA9211_BUCK_MODE_AUTO:
110 mode = REGULATOR_MODE_NORMAL;
111 break;
112 case DA9211_BUCK_MODE_SLEEP:
113 mode = REGULATOR_MODE_STANDBY;
114 break;
115 }
116
117 return mode;
118}
119
120static int da9211_buck_set_mode(struct regulator_dev *rdev,
121 unsigned int mode)
122{
123 int id = rdev_get_id(rdev);
124 struct da9211 *chip = rdev_get_drvdata(rdev);
125 int val = 0;
126
127 switch (mode) {
128 case REGULATOR_MODE_FAST:
129 val = DA9211_BUCK_MODE_SYNC;
130 break;
131 case REGULATOR_MODE_NORMAL:
132 val = DA9211_BUCK_MODE_AUTO;
133 break;
134 case REGULATOR_MODE_STANDBY:
135 val = DA9211_BUCK_MODE_SLEEP;
136 break;
137 }
138
139 return regmap_update_bits(chip->regmap, DA9211_REG_BUCKA_CONF+id,
140 0x03, val);
141}
142
143static int da9211_set_current_limit(struct regulator_dev *rdev, int min,
144 int max)
145{
146 int id = rdev_get_id(rdev);
147 struct da9211 *chip = rdev_get_drvdata(rdev);
James Ban005547e2014-08-08 14:27:04 +0900148 int i, max_size;
149 const int *current_limits;
150
151 switch (chip->chip_id) {
152 case DA9211:
153 current_limits = da9211_current_limits;
154 max_size = ARRAY_SIZE(da9211_current_limits)-1;
155 break;
156 case DA9213:
157 current_limits = da9213_current_limits;
158 max_size = ARRAY_SIZE(da9213_current_limits)-1;
159 break;
160 default:
161 return -EINVAL;
162 }
James Ban1028a372014-07-14 13:48:45 +0900163
164 /* search for closest to maximum */
James Ban005547e2014-08-08 14:27:04 +0900165 for (i = max_size; i >= 0; i--) {
166 if (min <= current_limits[i] &&
167 max >= current_limits[i]) {
James Ban1028a372014-07-14 13:48:45 +0900168 return regmap_update_bits(chip->regmap,
169 DA9211_REG_BUCK_ILIM,
170 (0x0F << id*4), (i << id*4));
171 }
172 }
173
174 return -EINVAL;
175}
176
177static int da9211_get_current_limit(struct regulator_dev *rdev)
178{
179 int id = rdev_get_id(rdev);
180 struct da9211 *chip = rdev_get_drvdata(rdev);
181 unsigned int data;
182 int ret;
James Ban005547e2014-08-08 14:27:04 +0900183 const int *current_limits;
184
185 switch (chip->chip_id) {
186 case DA9211:
187 current_limits = da9211_current_limits;
188 break;
189 case DA9213:
190 current_limits = da9213_current_limits;
191 break;
192 default:
193 return -EINVAL;
194 }
James Ban1028a372014-07-14 13:48:45 +0900195
196 ret = regmap_read(chip->regmap, DA9211_REG_BUCK_ILIM, &data);
197 if (ret < 0)
198 return ret;
199
James Ban005547e2014-08-08 14:27:04 +0900200 /* select one of 16 values: 0000 (2000mA or 3000mA)
201 * to 1111 (5000mA or 6000mA).
202 */
James Ban1028a372014-07-14 13:48:45 +0900203 data = (data >> id*4) & 0x0F;
James Ban005547e2014-08-08 14:27:04 +0900204 return current_limits[data];
James Ban1028a372014-07-14 13:48:45 +0900205}
206
207static struct regulator_ops da9211_buck_ops = {
208 .get_mode = da9211_buck_get_mode,
209 .set_mode = da9211_buck_set_mode,
210 .enable = regulator_enable_regmap,
211 .disable = regulator_disable_regmap,
212 .is_enabled = regulator_is_enabled_regmap,
213 .set_voltage_sel = regulator_set_voltage_sel_regmap,
214 .get_voltage_sel = regulator_get_voltage_sel_regmap,
215 .list_voltage = regulator_list_voltage_linear,
216 .set_current_limit = da9211_set_current_limit,
217 .get_current_limit = da9211_get_current_limit,
218};
219
220#define DA9211_BUCK(_id) \
221{\
222 .name = #_id,\
223 .ops = &da9211_buck_ops,\
224 .type = REGULATOR_VOLTAGE,\
225 .id = DA9211_ID_##_id,\
226 .n_voltages = (DA9211_MAX_MV - DA9211_MIN_MV) / DA9211_STEP_MV + 1,\
227 .min_uV = (DA9211_MIN_MV * 1000),\
228 .uV_step = (DA9211_STEP_MV * 1000),\
229 .enable_reg = DA9211_REG_BUCKA_CONT + DA9211_ID_##_id,\
230 .enable_mask = DA9211_BUCKA_EN,\
231 .vsel_reg = DA9211_REG_VBUCKA_A + DA9211_ID_##_id * 2,\
232 .vsel_mask = DA9211_VBUCK_MASK,\
233 .owner = THIS_MODULE,\
234}
235
236static struct regulator_desc da9211_regulators[] = {
237 DA9211_BUCK(BUCKA),
238 DA9211_BUCK(BUCKB),
239};
240
James Banbf3baca2014-08-27 11:47:07 +0900241#ifdef CONFIG_OF
242static struct of_regulator_match da9211_matches[] = {
243 [DA9211_ID_BUCKA] = { .name = "BUCKA" },
244 [DA9211_ID_BUCKB] = { .name = "BUCKB" },
245 };
246
247static struct da9211_pdata *da9211_parse_regulators_dt(
248 struct device *dev)
249{
250 struct da9211_pdata *pdata;
251 struct device_node *node;
252 int i, num, n;
253
254 node = of_get_child_by_name(dev->of_node, "regulators");
255 if (!node) {
256 dev_err(dev, "regulators node not found\n");
257 return ERR_PTR(-ENODEV);
258 }
259
260 num = of_regulator_match(dev, node, da9211_matches,
261 ARRAY_SIZE(da9211_matches));
262 of_node_put(node);
263 if (num < 0) {
264 dev_err(dev, "Failed to match regulators\n");
265 return ERR_PTR(-EINVAL);
266 }
267
268 pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
269 if (!pdata)
270 return ERR_PTR(-ENOMEM);
271
272 pdata->num_buck = num;
273
274 n = 0;
275 for (i = 0; i < ARRAY_SIZE(da9211_matches); i++) {
276 if (!da9211_matches[i].init_data)
277 continue;
278
279 pdata->init_data[n] = da9211_matches[i].init_data;
James Ban076c3b82015-01-16 12:13:27 +0900280 pdata->reg_node[n] = da9211_matches[i].of_node;
James Ban8c7dd8b2015-01-28 09:28:08 +0900281 pdata->gpio_ren[n] =
282 of_get_named_gpio(da9211_matches[i].of_node,
283 "enable-gpios", 0);
James Banbf3baca2014-08-27 11:47:07 +0900284 n++;
Fengguang Wuc2a946e2014-08-29 12:41:59 +0100285 }
James Banbf3baca2014-08-27 11:47:07 +0900286
287 return pdata;
288}
289#else
290static struct da9211_pdata *da9211_parse_regulators_dt(
291 struct device *dev)
292{
293 return ERR_PTR(-ENODEV);
294}
295#endif
296
James Ban1028a372014-07-14 13:48:45 +0900297static irqreturn_t da9211_irq_handler(int irq, void *data)
298{
299 struct da9211 *chip = data;
300 int reg_val, err, ret = IRQ_NONE;
301
302 err = regmap_read(chip->regmap, DA9211_REG_EVENT_B, &reg_val);
303 if (err < 0)
304 goto error_i2c;
305
306 if (reg_val & DA9211_E_OV_CURR_A) {
307 regulator_notifier_call_chain(chip->rdev[0],
308 REGULATOR_EVENT_OVER_CURRENT,
309 rdev_get_drvdata(chip->rdev[0]));
310
311 err = regmap_write(chip->regmap, DA9211_REG_EVENT_B,
312 DA9211_E_OV_CURR_A);
313 if (err < 0)
314 goto error_i2c;
315
316 ret = IRQ_HANDLED;
317 }
318
319 if (reg_val & DA9211_E_OV_CURR_B) {
320 regulator_notifier_call_chain(chip->rdev[1],
321 REGULATOR_EVENT_OVER_CURRENT,
322 rdev_get_drvdata(chip->rdev[1]));
323
324 err = regmap_write(chip->regmap, DA9211_REG_EVENT_B,
325 DA9211_E_OV_CURR_B);
326 if (err < 0)
327 goto error_i2c;
328
329 ret = IRQ_HANDLED;
330 }
331
332 return ret;
333
334error_i2c:
335 dev_err(chip->dev, "I2C error : %d\n", err);
336 return IRQ_NONE;
337}
338
339static int da9211_regulator_init(struct da9211 *chip)
340{
341 struct regulator_config config = { };
342 int i, ret;
343 unsigned int data;
344
345 ret = regmap_read(chip->regmap, DA9211_REG_CONFIG_E, &data);
346 if (ret < 0) {
Geert Uytterhoeven767e8aa2015-02-23 17:11:07 +0100347 dev_err(chip->dev, "Failed to read CONFIG_E reg: %d\n", ret);
Axel Lin516c1512014-07-20 19:19:35 +0800348 return ret;
James Ban1028a372014-07-14 13:48:45 +0900349 }
350
351 data &= DA9211_SLAVE_SEL;
352 /* If configuration for 1/2 bucks is different between platform data
353 * and the register, driver should exit.
354 */
355 if ((chip->pdata->num_buck == 2 && data == 0x40)
356 || (chip->pdata->num_buck == 1 && data == 0x00)) {
357 if (data == 0)
358 chip->num_regulator = 1;
359 else
360 chip->num_regulator = 2;
361 } else {
James Ban1028a372014-07-14 13:48:45 +0900362 dev_err(chip->dev, "Configuration is mismatched\n");
Axel Lin516c1512014-07-20 19:19:35 +0800363 return -EINVAL;
James Ban1028a372014-07-14 13:48:45 +0900364 }
365
366 for (i = 0; i < chip->num_regulator; i++) {
James Banbf3baca2014-08-27 11:47:07 +0900367 config.init_data = chip->pdata->init_data[i];
James Ban1028a372014-07-14 13:48:45 +0900368 config.dev = chip->dev;
369 config.driver_data = chip;
370 config.regmap = chip->regmap;
James Ban076c3b82015-01-16 12:13:27 +0900371 config.of_node = chip->pdata->reg_node[i];
James Ban1028a372014-07-14 13:48:45 +0900372
James Ban8c7dd8b2015-01-28 09:28:08 +0900373 if (gpio_is_valid(chip->pdata->gpio_ren[i])) {
374 config.ena_gpio = chip->pdata->gpio_ren[i];
375 config.ena_gpio_initialized = true;
376 } else {
377 config.ena_gpio = -EINVAL;
378 config.ena_gpio_initialized = false;
379 }
380
James Ban1028a372014-07-14 13:48:45 +0900381 chip->rdev[i] = devm_regulator_register(chip->dev,
382 &da9211_regulators[i], &config);
383 if (IS_ERR(chip->rdev[i])) {
384 dev_err(chip->dev,
385 "Failed to register DA9211 regulator\n");
Axel Lin516c1512014-07-20 19:19:35 +0800386 return PTR_ERR(chip->rdev[i]);
James Ban1028a372014-07-14 13:48:45 +0900387 }
388
389 if (chip->chip_irq != 0) {
390 ret = regmap_update_bits(chip->regmap,
James Ban4e7089f2014-09-29 16:59:20 +0900391 DA9211_REG_MASK_B, DA9211_M_OV_CURR_A << i, 0);
James Ban1028a372014-07-14 13:48:45 +0900392 if (ret < 0) {
393 dev_err(chip->dev,
394 "Failed to update mask reg: %d\n", ret);
Axel Lin516c1512014-07-20 19:19:35 +0800395 return ret;
James Ban1028a372014-07-14 13:48:45 +0900396 }
397 }
398 }
399
400 return 0;
James Ban1028a372014-07-14 13:48:45 +0900401}
James Banbf3baca2014-08-27 11:47:07 +0900402
James Ban1028a372014-07-14 13:48:45 +0900403/*
404 * I2C driver interface functions
405 */
406static int da9211_i2c_probe(struct i2c_client *i2c,
407 const struct i2c_device_id *id)
408{
409 struct da9211 *chip;
410 int error, ret;
James Ban005547e2014-08-08 14:27:04 +0900411 unsigned int data;
James Ban1028a372014-07-14 13:48:45 +0900412
413 chip = devm_kzalloc(&i2c->dev, sizeof(struct da9211), GFP_KERNEL);
Axel Lin1d3e6a62014-08-17 18:34:48 +0800414 if (!chip)
415 return -ENOMEM;
James Ban1028a372014-07-14 13:48:45 +0900416
417 chip->dev = &i2c->dev;
418 chip->regmap = devm_regmap_init_i2c(i2c, &da9211_regmap_config);
419 if (IS_ERR(chip->regmap)) {
420 error = PTR_ERR(chip->regmap);
James Ban005547e2014-08-08 14:27:04 +0900421 dev_err(chip->dev, "Failed to allocate register map: %d\n",
James Ban1028a372014-07-14 13:48:45 +0900422 error);
423 return error;
424 }
425
426 i2c_set_clientdata(i2c, chip);
427
428 chip->pdata = i2c->dev.platform_data;
James Ban005547e2014-08-08 14:27:04 +0900429
430 ret = regmap_read(chip->regmap, DA9211_REG_DEVICE_ID, &data);
431 if (ret < 0) {
432 dev_err(chip->dev, "Failed to read DEVICE_ID reg: %d\n", ret);
433 return ret;
434 }
435
436 switch (data) {
437 case DA9211_DEVICE_ID:
438 chip->chip_id = DA9211;
439 break;
440 case DA9213_DEVICE_ID:
441 chip->chip_id = DA9213;
442 break;
443 default:
444 dev_err(chip->dev, "Unsupported device id = 0x%x.\n", data);
James Ban1028a372014-07-14 13:48:45 +0900445 return -ENODEV;
446 }
447
James Banbf3baca2014-08-27 11:47:07 +0900448 if (!chip->pdata)
449 chip->pdata = da9211_parse_regulators_dt(chip->dev);
450
451 if (IS_ERR(chip->pdata)) {
452 dev_err(chip->dev, "No regulators defined for the platform\n");
453 return PTR_ERR(chip->pdata);
454 }
455
James Ban1028a372014-07-14 13:48:45 +0900456 chip->chip_irq = i2c->irq;
457
458 if (chip->chip_irq != 0) {
459 ret = devm_request_threaded_irq(chip->dev, chip->chip_irq, NULL,
460 da9211_irq_handler,
461 IRQF_TRIGGER_LOW|IRQF_ONESHOT,
462 "da9211", chip);
463 if (ret != 0) {
464 dev_err(chip->dev, "Failed to request IRQ: %d\n",
465 chip->chip_irq);
466 return ret;
467 }
468 } else {
469 dev_warn(chip->dev, "No IRQ configured\n");
470 }
471
472 ret = da9211_regulator_init(chip);
473
474 if (ret < 0)
James Ban005547e2014-08-08 14:27:04 +0900475 dev_err(chip->dev, "Failed to initialize regulator: %d\n", ret);
James Ban1028a372014-07-14 13:48:45 +0900476
477 return ret;
478}
479
James Ban1028a372014-07-14 13:48:45 +0900480static const struct i2c_device_id da9211_i2c_id[] = {
Axel Lin6a52f562014-09-05 09:12:55 +0800481 {"da9211", DA9211},
482 {"da9213", DA9213},
James Ban1028a372014-07-14 13:48:45 +0900483 {},
484};
James Ban1028a372014-07-14 13:48:45 +0900485MODULE_DEVICE_TABLE(i2c, da9211_i2c_id);
486
Axel Lin6a52f562014-09-05 09:12:55 +0800487#ifdef CONFIG_OF
488static const struct of_device_id da9211_dt_ids[] = {
489 { .compatible = "dlg,da9211", .data = &da9211_i2c_id[0] },
490 { .compatible = "dlg,da9213", .data = &da9211_i2c_id[1] },
491 {},
492};
493MODULE_DEVICE_TABLE(of, da9211_dt_ids);
494#endif
495
James Ban1028a372014-07-14 13:48:45 +0900496static struct i2c_driver da9211_regulator_driver = {
497 .driver = {
498 .name = "da9211",
499 .owner = THIS_MODULE,
Axel Lin6a52f562014-09-05 09:12:55 +0800500 .of_match_table = of_match_ptr(da9211_dt_ids),
James Ban1028a372014-07-14 13:48:45 +0900501 },
502 .probe = da9211_i2c_probe,
James Ban1028a372014-07-14 13:48:45 +0900503 .id_table = da9211_i2c_id,
504};
505
506module_i2c_driver(da9211_regulator_driver);
507
508MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>");
James Ban005547e2014-08-08 14:27:04 +0900509MODULE_DESCRIPTION("Regulator device driver for Dialog DA9211/DA9213");
James Ban1028a372014-07-14 13:48:45 +0900510MODULE_LICENSE("GPL v2");