blob: 7e9967af36ecd36a74dff0bc012bc2a2bed8fb72 [file] [log] [blame]
Daniel Jeongdc76df52014-03-03 06:52:10 -03001/*
2 * drivers/media/i2c/lm3646.c
3 * General device driver for TI lm3646, Dual FLASH LED Driver
4 *
5 * Copyright (C) 2014 Texas Instruments
6 *
7 * Contact: Daniel Jeong <gshark.jeong@gmail.com>
8 * Ldd-Mlp <ldd-mlp@list.ti.com>
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * version 2 as published by the Free Software Foundation.
13 */
14
15#include <linux/delay.h>
16#include <linux/i2c.h>
17#include <linux/module.h>
18#include <linux/slab.h>
19#include <linux/regmap.h>
20#include <linux/videodev2.h>
Mauro Carvalho Chehabb5dcee22015-11-10 12:01:44 -020021#include <media/i2c/lm3646.h>
Daniel Jeongdc76df52014-03-03 06:52:10 -030022#include <media/v4l2-ctrls.h>
23#include <media/v4l2-device.h>
24
25/* registers definitions */
26#define REG_ENABLE 0x01
27#define REG_TORCH_BR 0x05
28#define REG_FLASH_BR 0x05
29#define REG_FLASH_TOUT 0x04
30#define REG_FLAG 0x08
31#define REG_STROBE_SRC 0x06
32#define REG_LED1_FLASH_BR 0x06
33#define REG_LED1_TORCH_BR 0x07
34
35#define MASK_ENABLE 0x03
36#define MASK_TORCH_BR 0x70
37#define MASK_FLASH_BR 0x0F
38#define MASK_FLASH_TOUT 0x07
39#define MASK_FLAG 0xFF
40#define MASK_STROBE_SRC 0x80
41
42/* Fault Mask */
43#define FAULT_TIMEOUT (1<<0)
44#define FAULT_SHORT_CIRCUIT (1<<1)
45#define FAULT_UVLO (1<<2)
46#define FAULT_IVFM (1<<3)
47#define FAULT_OCP (1<<4)
48#define FAULT_OVERTEMP (1<<5)
49#define FAULT_NTC_TRIP (1<<6)
50#define FAULT_OVP (1<<7)
51
52enum led_mode {
53 MODE_SHDN = 0x0,
54 MODE_TORCH = 0x2,
55 MODE_FLASH = 0x3,
56};
57
58/*
59 * struct lm3646_flash
60 *
61 * @pdata: platform data
62 * @regmap: reg. map for i2c
63 * @lock: muxtex for serial access.
64 * @led_mode: V4L2 LED mode
65 * @ctrls_led: V4L2 contols
66 * @subdev_led: V4L2 subdev
67 * @mode_reg : mode register value
68 */
69struct lm3646_flash {
70 struct device *dev;
71 struct lm3646_platform_data *pdata;
72 struct regmap *regmap;
73
74 struct v4l2_ctrl_handler ctrls_led;
75 struct v4l2_subdev subdev_led;
76
77 u8 mode_reg;
78};
79
80#define to_lm3646_flash(_ctrl) \
81 container_of(_ctrl->handler, struct lm3646_flash, ctrls_led)
82
83/* enable mode control */
84static int lm3646_mode_ctrl(struct lm3646_flash *flash,
85 enum v4l2_flash_led_mode led_mode)
86{
87 switch (led_mode) {
88 case V4L2_FLASH_LED_MODE_NONE:
89 return regmap_write(flash->regmap,
90 REG_ENABLE, flash->mode_reg | MODE_SHDN);
91 case V4L2_FLASH_LED_MODE_TORCH:
92 return regmap_write(flash->regmap,
93 REG_ENABLE, flash->mode_reg | MODE_TORCH);
94 case V4L2_FLASH_LED_MODE_FLASH:
95 return regmap_write(flash->regmap,
96 REG_ENABLE, flash->mode_reg | MODE_FLASH);
97 }
98 return -EINVAL;
99}
100
101/* V4L2 controls */
102static int lm3646_get_ctrl(struct v4l2_ctrl *ctrl)
103{
104 struct lm3646_flash *flash = to_lm3646_flash(ctrl);
105 unsigned int reg_val;
106 int rval;
107
108 if (ctrl->id != V4L2_CID_FLASH_FAULT)
109 return -EINVAL;
110
111 rval = regmap_read(flash->regmap, REG_FLAG, &reg_val);
112 if (rval < 0)
113 return rval;
114
115 ctrl->val = 0;
116 if (reg_val & FAULT_TIMEOUT)
117 ctrl->val |= V4L2_FLASH_FAULT_TIMEOUT;
118 if (reg_val & FAULT_SHORT_CIRCUIT)
119 ctrl->val |= V4L2_FLASH_FAULT_SHORT_CIRCUIT;
120 if (reg_val & FAULT_UVLO)
121 ctrl->val |= V4L2_FLASH_FAULT_UNDER_VOLTAGE;
122 if (reg_val & FAULT_IVFM)
123 ctrl->val |= V4L2_FLASH_FAULT_INPUT_VOLTAGE;
124 if (reg_val & FAULT_OCP)
125 ctrl->val |= V4L2_FLASH_FAULT_OVER_CURRENT;
126 if (reg_val & FAULT_OVERTEMP)
127 ctrl->val |= V4L2_FLASH_FAULT_OVER_TEMPERATURE;
128 if (reg_val & FAULT_NTC_TRIP)
129 ctrl->val |= V4L2_FLASH_FAULT_LED_OVER_TEMPERATURE;
130 if (reg_val & FAULT_OVP)
131 ctrl->val |= V4L2_FLASH_FAULT_OVER_VOLTAGE;
132
133 return 0;
134}
135
136static int lm3646_set_ctrl(struct v4l2_ctrl *ctrl)
137{
138 struct lm3646_flash *flash = to_lm3646_flash(ctrl);
139 unsigned int reg_val;
140 int rval = -EINVAL;
141
142 switch (ctrl->id) {
143 case V4L2_CID_FLASH_LED_MODE:
144
145 if (ctrl->val != V4L2_FLASH_LED_MODE_FLASH)
146 return lm3646_mode_ctrl(flash, ctrl->val);
147 /* switch to SHDN mode before flash strobe on */
148 return lm3646_mode_ctrl(flash, V4L2_FLASH_LED_MODE_NONE);
149
150 case V4L2_CID_FLASH_STROBE_SOURCE:
151 return regmap_update_bits(flash->regmap,
152 REG_STROBE_SRC, MASK_STROBE_SRC,
153 (ctrl->val) << 7);
154
155 case V4L2_CID_FLASH_STROBE:
156
157 /* read and check current mode of chip to start flash */
158 rval = regmap_read(flash->regmap, REG_ENABLE, &reg_val);
159 if (rval < 0 || ((reg_val & MASK_ENABLE) != MODE_SHDN))
160 return rval;
161 /* flash on */
162 return lm3646_mode_ctrl(flash, V4L2_FLASH_LED_MODE_FLASH);
163
164 case V4L2_CID_FLASH_STROBE_STOP:
165
166 /*
167 * flash mode will be turned automatically
168 * from FLASH mode to SHDN mode after flash duration timeout
169 * read and check current mode of chip to stop flash
170 */
171 rval = regmap_read(flash->regmap, REG_ENABLE, &reg_val);
172 if (rval < 0)
173 return rval;
174 if ((reg_val & MASK_ENABLE) == MODE_FLASH)
175 return lm3646_mode_ctrl(flash,
176 V4L2_FLASH_LED_MODE_NONE);
177 return rval;
178
179 case V4L2_CID_FLASH_TIMEOUT:
180 return regmap_update_bits(flash->regmap,
181 REG_FLASH_TOUT, MASK_FLASH_TOUT,
182 LM3646_FLASH_TOUT_ms_TO_REG
183 (ctrl->val));
184
185 case V4L2_CID_FLASH_INTENSITY:
186 return regmap_update_bits(flash->regmap,
187 REG_FLASH_BR, MASK_FLASH_BR,
188 LM3646_TOTAL_FLASH_BRT_uA_TO_REG
189 (ctrl->val));
190
191 case V4L2_CID_FLASH_TORCH_INTENSITY:
192 return regmap_update_bits(flash->regmap,
193 REG_TORCH_BR, MASK_TORCH_BR,
194 LM3646_TOTAL_TORCH_BRT_uA_TO_REG
195 (ctrl->val) << 4);
196 }
197
198 return -EINVAL;
199}
200
201static const struct v4l2_ctrl_ops lm3646_led_ctrl_ops = {
202 .g_volatile_ctrl = lm3646_get_ctrl,
203 .s_ctrl = lm3646_set_ctrl,
204};
205
206static int lm3646_init_controls(struct lm3646_flash *flash)
207{
208 struct v4l2_ctrl *fault;
209 struct v4l2_ctrl_handler *hdl = &flash->ctrls_led;
210 const struct v4l2_ctrl_ops *ops = &lm3646_led_ctrl_ops;
211
212 v4l2_ctrl_handler_init(hdl, 8);
213 /* flash mode */
214 v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_FLASH_LED_MODE,
215 V4L2_FLASH_LED_MODE_TORCH, ~0x7,
216 V4L2_FLASH_LED_MODE_NONE);
217
218 /* flash source */
219 v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_FLASH_STROBE_SOURCE,
220 0x1, ~0x3, V4L2_FLASH_STROBE_SOURCE_SOFTWARE);
221
222 /* flash strobe */
223 v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_STROBE, 0, 0, 0, 0);
224 /* flash strobe stop */
225 v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0);
226
227 /* flash strobe timeout */
228 v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_TIMEOUT,
229 LM3646_FLASH_TOUT_MIN,
230 LM3646_FLASH_TOUT_MAX,
231 LM3646_FLASH_TOUT_STEP, flash->pdata->flash_timeout);
232
233 /* max flash current */
234 v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_INTENSITY,
235 LM3646_TOTAL_FLASH_BRT_MIN,
236 LM3646_TOTAL_FLASH_BRT_MAX,
237 LM3646_TOTAL_FLASH_BRT_STEP,
238 LM3646_TOTAL_FLASH_BRT_MAX);
239
240 /* max torch current */
241 v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_TORCH_INTENSITY,
242 LM3646_TOTAL_TORCH_BRT_MIN,
243 LM3646_TOTAL_TORCH_BRT_MAX,
244 LM3646_TOTAL_TORCH_BRT_STEP,
245 LM3646_TOTAL_TORCH_BRT_MAX);
246
247 /* fault */
248 fault = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_FAULT, 0,
249 V4L2_FLASH_FAULT_OVER_VOLTAGE
250 | V4L2_FLASH_FAULT_OVER_TEMPERATURE
251 | V4L2_FLASH_FAULT_SHORT_CIRCUIT
252 | V4L2_FLASH_FAULT_TIMEOUT, 0, 0);
253 if (fault != NULL)
254 fault->flags |= V4L2_CTRL_FLAG_VOLATILE;
255
256 if (hdl->error)
257 return hdl->error;
258
259 flash->subdev_led.ctrl_handler = hdl;
260 return 0;
261}
262
263/* initialize device */
264static const struct v4l2_subdev_ops lm3646_ops = {
265 .core = NULL,
266};
267
268static const struct regmap_config lm3646_regmap = {
269 .reg_bits = 8,
270 .val_bits = 8,
271 .max_register = 0xFF,
272};
273
274static int lm3646_subdev_init(struct lm3646_flash *flash)
275{
276 struct i2c_client *client = to_i2c_client(flash->dev);
277 int rval;
278
279 v4l2_i2c_subdev_init(&flash->subdev_led, client, &lm3646_ops);
280 flash->subdev_led.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
281 strcpy(flash->subdev_led.name, LM3646_NAME);
282 rval = lm3646_init_controls(flash);
283 if (rval)
284 goto err_out;
Mauro Carvalho Chehabab22e772015-12-11 07:44:40 -0200285 rval = media_entity_pads_init(&flash->subdev_led.entity, 0, NULL);
Daniel Jeongdc76df52014-03-03 06:52:10 -0300286 if (rval < 0)
287 goto err_out;
Mauro Carvalho Chehab4ca72ef2015-12-10 17:25:41 -0200288 flash->subdev_led.entity.function = MEDIA_ENT_F_FLASH;
Daniel Jeongdc76df52014-03-03 06:52:10 -0300289 return rval;
290
291err_out:
292 v4l2_ctrl_handler_free(&flash->ctrls_led);
293 return rval;
294}
295
296static int lm3646_init_device(struct lm3646_flash *flash)
297{
298 unsigned int reg_val;
299 int rval;
300
301 /* read the value of mode register to reduce redundant i2c accesses */
302 rval = regmap_read(flash->regmap, REG_ENABLE, &reg_val);
303 if (rval < 0)
304 return rval;
305 flash->mode_reg = reg_val & 0xfc;
306
307 /* output disable */
308 rval = lm3646_mode_ctrl(flash, V4L2_FLASH_LED_MODE_NONE);
309 if (rval < 0)
310 return rval;
311
312 /*
313 * LED1 flash current setting
314 * LED2 flash current = Total(Max) flash current - LED1 flash current
315 */
316 rval = regmap_update_bits(flash->regmap,
317 REG_LED1_FLASH_BR, 0x7F,
318 LM3646_LED1_FLASH_BRT_uA_TO_REG
319 (flash->pdata->led1_flash_brt));
320
321 if (rval < 0)
322 return rval;
323
324 /*
325 * LED1 torch current setting
326 * LED2 torch current = Total(Max) torch current - LED1 torch current
327 */
328 rval = regmap_update_bits(flash->regmap,
329 REG_LED1_TORCH_BR, 0x7F,
330 LM3646_LED1_TORCH_BRT_uA_TO_REG
331 (flash->pdata->led1_torch_brt));
332 if (rval < 0)
333 return rval;
334
335 /* Reset flag register */
336 return regmap_read(flash->regmap, REG_FLAG, &reg_val);
337}
338
339static int lm3646_probe(struct i2c_client *client,
340 const struct i2c_device_id *devid)
341{
342 struct lm3646_flash *flash;
343 struct lm3646_platform_data *pdata = dev_get_platdata(&client->dev);
344 int rval;
345
346 flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL);
347 if (flash == NULL)
348 return -ENOMEM;
349
350 flash->regmap = devm_regmap_init_i2c(client, &lm3646_regmap);
351 if (IS_ERR(flash->regmap))
352 return PTR_ERR(flash->regmap);
353
354 /* check device tree if there is no platform data */
355 if (pdata == NULL) {
356 pdata = devm_kzalloc(&client->dev,
357 sizeof(struct lm3646_platform_data),
358 GFP_KERNEL);
359 if (pdata == NULL)
360 return -ENOMEM;
361 /* use default data in case of no platform data */
362 pdata->flash_timeout = LM3646_FLASH_TOUT_MAX;
363 pdata->led1_torch_brt = LM3646_LED1_TORCH_BRT_MAX;
364 pdata->led1_flash_brt = LM3646_LED1_FLASH_BRT_MAX;
365 }
366 flash->pdata = pdata;
367 flash->dev = &client->dev;
368
369 rval = lm3646_subdev_init(flash);
370 if (rval < 0)
371 return rval;
372
373 rval = lm3646_init_device(flash);
374 if (rval < 0)
375 return rval;
376
377 i2c_set_clientdata(client, flash);
378
379 return 0;
380}
381
382static int lm3646_remove(struct i2c_client *client)
383{
384 struct lm3646_flash *flash = i2c_get_clientdata(client);
385
386 v4l2_device_unregister_subdev(&flash->subdev_led);
387 v4l2_ctrl_handler_free(&flash->ctrls_led);
388 media_entity_cleanup(&flash->subdev_led.entity);
389
390 return 0;
391}
392
393static const struct i2c_device_id lm3646_id_table[] = {
394 {LM3646_NAME, 0},
395 {}
396};
397
398MODULE_DEVICE_TABLE(i2c, lm3646_id_table);
399
400static struct i2c_driver lm3646_i2c_driver = {
401 .driver = {
402 .name = LM3646_NAME,
403 },
404 .probe = lm3646_probe,
405 .remove = lm3646_remove,
406 .id_table = lm3646_id_table,
407};
408
409module_i2c_driver(lm3646_i2c_driver);
410
411MODULE_AUTHOR("Daniel Jeong <gshark.jeong@gmail.com>");
412MODULE_AUTHOR("Ldd Mlp <ldd-mlp@list.ti.com>");
413MODULE_DESCRIPTION("Texas Instruments LM3646 Dual Flash LED driver");
414MODULE_LICENSE("GPL");