blob: da076796999ee6ee5e3ee9ae17d65856ce744629 [file] [log] [blame]
Martin Hostettler251cb882011-12-17 07:10:55 -03001/*
2 * Driver for MT9M032 CMOS Image Sensor from Micron
3 *
4 * Copyright (C) 2010-2011 Lund Engineering
5 * Contact: Gil Lund <gwlund@lundeng.com>
6 * Author: Martin Hostettler <martin@neutronstar.dyndns.org>
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * version 2 as published by the Free Software Foundation.
11 *
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
20 * 02110-1301 USA
21 */
22
23#include <linux/delay.h>
24#include <linux/i2c.h>
25#include <linux/init.h>
26#include <linux/kernel.h>
27#include <linux/math64.h>
28#include <linux/module.h>
29#include <linux/mutex.h>
30#include <linux/slab.h>
31#include <linux/v4l2-mediabus.h>
32
33#include <media/media-entity.h>
Mauro Carvalho Chehabb5dcee22015-11-10 12:01:44 -020034#include <media/i2c/mt9m032.h>
Martin Hostettler251cb882011-12-17 07:10:55 -030035#include <media/v4l2-ctrls.h>
36#include <media/v4l2-device.h>
37#include <media/v4l2-subdev.h>
38
39#include "aptina-pll.h"
40
41/*
42 * width and height include active boundary and black parts
43 *
44 * column 0- 15 active boundary
45 * column 16-1455 image
46 * column 1456-1471 active boundary
47 * column 1472-1599 black
48 *
49 * row 0- 51 black
50 * row 53- 59 active boundary
51 * row 60-1139 image
52 * row 1140-1147 active boundary
53 * row 1148-1151 black
54 */
55
56#define MT9M032_PIXEL_ARRAY_WIDTH 1600
57#define MT9M032_PIXEL_ARRAY_HEIGHT 1152
58
59#define MT9M032_CHIP_VERSION 0x00
60#define MT9M032_CHIP_VERSION_VALUE 0x1402
61#define MT9M032_ROW_START 0x01
62#define MT9M032_ROW_START_MIN 0
63#define MT9M032_ROW_START_MAX 1152
64#define MT9M032_ROW_START_DEF 60
65#define MT9M032_COLUMN_START 0x02
66#define MT9M032_COLUMN_START_MIN 0
67#define MT9M032_COLUMN_START_MAX 1600
68#define MT9M032_COLUMN_START_DEF 16
69#define MT9M032_ROW_SIZE 0x03
70#define MT9M032_ROW_SIZE_MIN 32
71#define MT9M032_ROW_SIZE_MAX 1152
72#define MT9M032_ROW_SIZE_DEF 1080
73#define MT9M032_COLUMN_SIZE 0x04
74#define MT9M032_COLUMN_SIZE_MIN 32
75#define MT9M032_COLUMN_SIZE_MAX 1600
76#define MT9M032_COLUMN_SIZE_DEF 1440
77#define MT9M032_HBLANK 0x05
78#define MT9M032_VBLANK 0x06
79#define MT9M032_VBLANK_MAX 0x7ff
80#define MT9M032_SHUTTER_WIDTH_HIGH 0x08
81#define MT9M032_SHUTTER_WIDTH_LOW 0x09
82#define MT9M032_SHUTTER_WIDTH_MIN 1
83#define MT9M032_SHUTTER_WIDTH_MAX 1048575
84#define MT9M032_SHUTTER_WIDTH_DEF 1943
85#define MT9M032_PIX_CLK_CTRL 0x0a
86#define MT9M032_PIX_CLK_CTRL_INV_PIXCLK 0x8000
87#define MT9M032_RESTART 0x0b
88#define MT9M032_RESET 0x0d
89#define MT9M032_PLL_CONFIG1 0x11
Laurent Pincharta54b80b2012-09-25 10:46:34 -030090#define MT9M032_PLL_CONFIG1_PREDIV_MASK 0x3f
Martin Hostettler251cb882011-12-17 07:10:55 -030091#define MT9M032_PLL_CONFIG1_MUL_SHIFT 8
92#define MT9M032_READ_MODE1 0x1e
Laurent Pinchart73254c32012-09-26 05:54:17 -030093#define MT9M032_READ_MODE1_OUTPUT_BAD_FRAMES (1 << 13)
94#define MT9M032_READ_MODE1_MAINTAIN_FRAME_RATE (1 << 12)
95#define MT9M032_READ_MODE1_XOR_LINE_VALID (1 << 11)
96#define MT9M032_READ_MODE1_CONT_LINE_VALID (1 << 10)
97#define MT9M032_READ_MODE1_INVERT_TRIGGER (1 << 9)
98#define MT9M032_READ_MODE1_SNAPSHOT (1 << 8)
99#define MT9M032_READ_MODE1_GLOBAL_RESET (1 << 7)
100#define MT9M032_READ_MODE1_BULB_EXPOSURE (1 << 6)
101#define MT9M032_READ_MODE1_INVERT_STROBE (1 << 5)
102#define MT9M032_READ_MODE1_STROBE_ENABLE (1 << 4)
103#define MT9M032_READ_MODE1_STROBE_START_TRIG1 (0 << 2)
104#define MT9M032_READ_MODE1_STROBE_START_EXP (1 << 2)
105#define MT9M032_READ_MODE1_STROBE_START_SHUTTER (2 << 2)
106#define MT9M032_READ_MODE1_STROBE_START_TRIG2 (3 << 2)
107#define MT9M032_READ_MODE1_STROBE_END_TRIG1 (0 << 0)
108#define MT9M032_READ_MODE1_STROBE_END_EXP (1 << 0)
109#define MT9M032_READ_MODE1_STROBE_END_SHUTTER (2 << 0)
110#define MT9M032_READ_MODE1_STROBE_END_TRIG2 (3 << 0)
Martin Hostettler251cb882011-12-17 07:10:55 -0300111#define MT9M032_READ_MODE2 0x20
112#define MT9M032_READ_MODE2_VFLIP_SHIFT 15
113#define MT9M032_READ_MODE2_HFLIP_SHIFT 14
114#define MT9M032_READ_MODE2_ROW_BLC 0x40
115#define MT9M032_GAIN_GREEN1 0x2b
116#define MT9M032_GAIN_BLUE 0x2c
117#define MT9M032_GAIN_RED 0x2d
118#define MT9M032_GAIN_GREEN2 0x2e
119
120/* write only */
121#define MT9M032_GAIN_ALL 0x35
122#define MT9M032_GAIN_DIGITAL_MASK 0x7f
123#define MT9M032_GAIN_DIGITAL_SHIFT 8
124#define MT9M032_GAIN_AMUL_SHIFT 6
125#define MT9M032_GAIN_ANALOG_MASK 0x3f
126#define MT9M032_FORMATTER1 0x9e
Laurent Pincharta54b80b2012-09-25 10:46:34 -0300127#define MT9M032_FORMATTER1_PLL_P1_6 (1 << 8)
128#define MT9M032_FORMATTER1_PARALLEL (1 << 12)
Martin Hostettler251cb882011-12-17 07:10:55 -0300129#define MT9M032_FORMATTER2 0x9f
130#define MT9M032_FORMATTER2_DOUT_EN 0x1000
131#define MT9M032_FORMATTER2_PIXCLK_EN 0x2000
132
133/*
134 * The available MT9M032 datasheet is missing documentation for register 0x10
135 * MT9P031 seems to be close enough, so use constants from that datasheet for
136 * now.
137 * But keep the name MT9P031 to remind us, that this isn't really confirmed
138 * for this sensor.
139 */
140#define MT9P031_PLL_CONTROL 0x10
141#define MT9P031_PLL_CONTROL_PWROFF 0x0050
142#define MT9P031_PLL_CONTROL_PWRON 0x0051
143#define MT9P031_PLL_CONTROL_USEPLL 0x0052
Martin Hostettler251cb882011-12-17 07:10:55 -0300144
145struct mt9m032 {
146 struct v4l2_subdev subdev;
147 struct media_pad pad;
148 struct mt9m032_platform_data *pdata;
149
150 unsigned int pix_clock;
151
152 struct v4l2_ctrl_handler ctrls;
153 struct {
154 struct v4l2_ctrl *hflip;
155 struct v4l2_ctrl *vflip;
156 };
157
158 struct mutex lock; /* Protects streaming, format, interval and crop */
159
160 bool streaming;
161
162 struct v4l2_mbus_framefmt format;
163 struct v4l2_rect crop;
164 struct v4l2_fract frame_interval;
165};
166
167#define to_mt9m032(sd) container_of(sd, struct mt9m032, subdev)
168#define to_dev(sensor) \
169 (&((struct i2c_client *)v4l2_get_subdevdata(&(sensor)->subdev))->dev)
170
171static int mt9m032_read(struct i2c_client *client, u8 reg)
172{
173 return i2c_smbus_read_word_swapped(client, reg);
174}
175
176static int mt9m032_write(struct i2c_client *client, u8 reg, const u16 data)
177{
178 return i2c_smbus_write_word_swapped(client, reg, data);
179}
180
181static u32 mt9m032_row_time(struct mt9m032 *sensor, unsigned int width)
182{
183 unsigned int effective_width;
184 u32 ns;
185
186 effective_width = width + 716; /* empirical value */
187 ns = div_u64(1000000000ULL * effective_width, sensor->pix_clock);
188 dev_dbg(to_dev(sensor), "MT9M032 line time: %u ns\n", ns);
189 return ns;
190}
191
192static int mt9m032_update_timing(struct mt9m032 *sensor,
193 struct v4l2_fract *interval)
194{
195 struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
196 struct v4l2_rect *crop = &sensor->crop;
197 unsigned int min_vblank;
198 unsigned int vblank;
199 u32 row_time;
200
201 if (!interval)
202 interval = &sensor->frame_interval;
203
204 row_time = mt9m032_row_time(sensor, crop->width);
205
206 vblank = div_u64(1000000000ULL * interval->numerator,
207 (u64)row_time * interval->denominator)
208 - crop->height;
209
210 if (vblank > MT9M032_VBLANK_MAX) {
211 /* hardware limits to 11 bit values */
212 interval->denominator = 1000;
213 interval->numerator =
214 div_u64((crop->height + MT9M032_VBLANK_MAX) *
215 (u64)row_time * interval->denominator,
216 1000000000ULL);
217 vblank = div_u64(1000000000ULL * interval->numerator,
218 (u64)row_time * interval->denominator)
219 - crop->height;
220 }
221 /* enforce minimal 1.6ms blanking time. */
222 min_vblank = 1600000 / row_time;
223 vblank = clamp_t(unsigned int, vblank, min_vblank, MT9M032_VBLANK_MAX);
224
225 return mt9m032_write(client, MT9M032_VBLANK, vblank);
226}
227
228static int mt9m032_update_geom_timing(struct mt9m032 *sensor)
229{
230 struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
231 int ret;
232
233 ret = mt9m032_write(client, MT9M032_COLUMN_SIZE,
234 sensor->crop.width - 1);
235 if (!ret)
236 ret = mt9m032_write(client, MT9M032_ROW_SIZE,
237 sensor->crop.height - 1);
238 if (!ret)
239 ret = mt9m032_write(client, MT9M032_COLUMN_START,
240 sensor->crop.left);
241 if (!ret)
242 ret = mt9m032_write(client, MT9M032_ROW_START,
243 sensor->crop.top);
244 if (!ret)
245 ret = mt9m032_update_timing(sensor, NULL);
246 return ret;
247}
248
249static int update_formatter2(struct mt9m032 *sensor, bool streaming)
250{
251 struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
252 u16 reg_val = MT9M032_FORMATTER2_DOUT_EN
253 | 0x0070; /* parts reserved! */
254 /* possibly for changing to 14-bit mode */
255
256 if (streaming)
257 reg_val |= MT9M032_FORMATTER2_PIXCLK_EN; /* pixclock enable */
258
259 return mt9m032_write(client, MT9M032_FORMATTER2, reg_val);
260}
261
262static int mt9m032_setup_pll(struct mt9m032 *sensor)
263{
264 static const struct aptina_pll_limits limits = {
265 .ext_clock_min = 8000000,
266 .ext_clock_max = 16500000,
267 .int_clock_min = 2000000,
268 .int_clock_max = 24000000,
269 .out_clock_min = 322000000,
270 .out_clock_max = 693000000,
271 .pix_clock_max = 99000000,
272 .n_min = 1,
273 .n_max = 64,
274 .m_min = 16,
275 .m_max = 255,
Laurent Pincharta54b80b2012-09-25 10:46:34 -0300276 .p1_min = 6,
277 .p1_max = 7,
Martin Hostettler251cb882011-12-17 07:10:55 -0300278 };
279
280 struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
281 struct mt9m032_platform_data *pdata = sensor->pdata;
282 struct aptina_pll pll;
Laurent Pincharta54b80b2012-09-25 10:46:34 -0300283 u16 reg_val;
Martin Hostettler251cb882011-12-17 07:10:55 -0300284 int ret;
285
286 pll.ext_clock = pdata->ext_clock;
287 pll.pix_clock = pdata->pix_clock;
288
289 ret = aptina_pll_calculate(&client->dev, &limits, &pll);
290 if (ret < 0)
291 return ret;
292
293 sensor->pix_clock = pdata->pix_clock;
294
295 ret = mt9m032_write(client, MT9M032_PLL_CONFIG1,
Laurent Pincharta54b80b2012-09-25 10:46:34 -0300296 (pll.m << MT9M032_PLL_CONFIG1_MUL_SHIFT) |
297 ((pll.n - 1) & MT9M032_PLL_CONFIG1_PREDIV_MASK));
Martin Hostettler251cb882011-12-17 07:10:55 -0300298 if (!ret)
299 ret = mt9m032_write(client, MT9P031_PLL_CONTROL,
300 MT9P031_PLL_CONTROL_PWRON |
301 MT9P031_PLL_CONTROL_USEPLL);
302 if (!ret) /* more reserved, Continuous, Master Mode */
Laurent Pinchart73254c32012-09-26 05:54:17 -0300303 ret = mt9m032_write(client, MT9M032_READ_MODE1, 0x8000 |
304 MT9M032_READ_MODE1_STROBE_START_EXP |
305 MT9M032_READ_MODE1_STROBE_END_SHUTTER);
Laurent Pincharta54b80b2012-09-25 10:46:34 -0300306 if (!ret) {
307 reg_val = (pll.p1 == 6 ? MT9M032_FORMATTER1_PLL_P1_6 : 0)
308 | MT9M032_FORMATTER1_PARALLEL | 0x001e; /* 14-bit */
309 ret = mt9m032_write(client, MT9M032_FORMATTER1, reg_val);
310 }
Martin Hostettler251cb882011-12-17 07:10:55 -0300311
312 return ret;
313}
314
315/* -----------------------------------------------------------------------------
316 * Subdev pad operations
317 */
318
319static int mt9m032_enum_mbus_code(struct v4l2_subdev *subdev,
Hans Verkuilf7234132015-03-04 01:47:54 -0800320 struct v4l2_subdev_pad_config *cfg,
Martin Hostettler251cb882011-12-17 07:10:55 -0300321 struct v4l2_subdev_mbus_code_enum *code)
322{
323 if (code->index != 0)
324 return -EINVAL;
325
Boris BREZILLONf5fe58f2014-11-10 14:28:29 -0300326 code->code = MEDIA_BUS_FMT_Y8_1X8;
Martin Hostettler251cb882011-12-17 07:10:55 -0300327 return 0;
328}
329
330static int mt9m032_enum_frame_size(struct v4l2_subdev *subdev,
Hans Verkuilf7234132015-03-04 01:47:54 -0800331 struct v4l2_subdev_pad_config *cfg,
Martin Hostettler251cb882011-12-17 07:10:55 -0300332 struct v4l2_subdev_frame_size_enum *fse)
333{
Boris BREZILLONf5fe58f2014-11-10 14:28:29 -0300334 if (fse->index != 0 || fse->code != MEDIA_BUS_FMT_Y8_1X8)
Martin Hostettler251cb882011-12-17 07:10:55 -0300335 return -EINVAL;
336
337 fse->min_width = MT9M032_COLUMN_SIZE_DEF;
338 fse->max_width = MT9M032_COLUMN_SIZE_DEF;
339 fse->min_height = MT9M032_ROW_SIZE_DEF;
340 fse->max_height = MT9M032_ROW_SIZE_DEF;
341
342 return 0;
343}
344
345/**
346 * __mt9m032_get_pad_crop() - get crop rect
347 * @sensor: pointer to the sensor struct
Hans Verkuilf7234132015-03-04 01:47:54 -0800348 * @cfg: v4l2_subdev_pad_config for getting the try crop rect from
Martin Hostettler251cb882011-12-17 07:10:55 -0300349 * @which: select try or active crop rect
350 *
351 * Returns a pointer the current active or fh relative try crop rect
352 */
353static struct v4l2_rect *
Hans Verkuilf7234132015-03-04 01:47:54 -0800354__mt9m032_get_pad_crop(struct mt9m032 *sensor, struct v4l2_subdev_pad_config *cfg,
Martin Hostettler251cb882011-12-17 07:10:55 -0300355 enum v4l2_subdev_format_whence which)
356{
357 switch (which) {
358 case V4L2_SUBDEV_FORMAT_TRY:
Hans Verkuilf7234132015-03-04 01:47:54 -0800359 return v4l2_subdev_get_try_crop(&sensor->subdev, cfg, 0);
Martin Hostettler251cb882011-12-17 07:10:55 -0300360 case V4L2_SUBDEV_FORMAT_ACTIVE:
361 return &sensor->crop;
362 default:
363 return NULL;
364 }
365}
366
367/**
368 * __mt9m032_get_pad_format() - get format
369 * @sensor: pointer to the sensor struct
Hans Verkuilf7234132015-03-04 01:47:54 -0800370 * @cfg: v4l2_subdev_pad_config for getting the try format from
Martin Hostettler251cb882011-12-17 07:10:55 -0300371 * @which: select try or active format
372 *
373 * Returns a pointer the current active or fh relative try format
374 */
375static struct v4l2_mbus_framefmt *
Hans Verkuilf7234132015-03-04 01:47:54 -0800376__mt9m032_get_pad_format(struct mt9m032 *sensor, struct v4l2_subdev_pad_config *cfg,
Martin Hostettler251cb882011-12-17 07:10:55 -0300377 enum v4l2_subdev_format_whence which)
378{
379 switch (which) {
380 case V4L2_SUBDEV_FORMAT_TRY:
Hans Verkuilf7234132015-03-04 01:47:54 -0800381 return v4l2_subdev_get_try_format(&sensor->subdev, cfg, 0);
Martin Hostettler251cb882011-12-17 07:10:55 -0300382 case V4L2_SUBDEV_FORMAT_ACTIVE:
383 return &sensor->format;
384 default:
385 return NULL;
386 }
387}
388
389static int mt9m032_get_pad_format(struct v4l2_subdev *subdev,
Hans Verkuilf7234132015-03-04 01:47:54 -0800390 struct v4l2_subdev_pad_config *cfg,
Martin Hostettler251cb882011-12-17 07:10:55 -0300391 struct v4l2_subdev_format *fmt)
392{
393 struct mt9m032 *sensor = to_mt9m032(subdev);
394
395 mutex_lock(&sensor->lock);
Hans Verkuilf7234132015-03-04 01:47:54 -0800396 fmt->format = *__mt9m032_get_pad_format(sensor, cfg, fmt->which);
Martin Hostettler251cb882011-12-17 07:10:55 -0300397 mutex_unlock(&sensor->lock);
398
399 return 0;
400}
401
402static int mt9m032_set_pad_format(struct v4l2_subdev *subdev,
Hans Verkuilf7234132015-03-04 01:47:54 -0800403 struct v4l2_subdev_pad_config *cfg,
Martin Hostettler251cb882011-12-17 07:10:55 -0300404 struct v4l2_subdev_format *fmt)
405{
406 struct mt9m032 *sensor = to_mt9m032(subdev);
407 int ret;
408
409 mutex_lock(&sensor->lock);
410
411 if (sensor->streaming && fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
412 ret = -EBUSY;
413 goto done;
414 }
415
416 /* Scaling is not supported, the format is thus fixed. */
Hans Verkuilf7234132015-03-04 01:47:54 -0800417 fmt->format = *__mt9m032_get_pad_format(sensor, cfg, fmt->which);
Guennadi Liakhovetskib1e11792012-04-08 17:31:24 -0300418 ret = 0;
Martin Hostettler251cb882011-12-17 07:10:55 -0300419
420done:
Guennadi Liakhovetskib1e11792012-04-08 17:31:24 -0300421 mutex_unlock(&sensor->lock);
Martin Hostettler251cb882011-12-17 07:10:55 -0300422 return ret;
423}
424
Hans Verkuil1a023fe2014-12-04 06:54:52 -0300425static int mt9m032_get_pad_selection(struct v4l2_subdev *subdev,
Hans Verkuilf7234132015-03-04 01:47:54 -0800426 struct v4l2_subdev_pad_config *cfg,
Hans Verkuil1a023fe2014-12-04 06:54:52 -0300427 struct v4l2_subdev_selection *sel)
Martin Hostettler251cb882011-12-17 07:10:55 -0300428{
429 struct mt9m032 *sensor = to_mt9m032(subdev);
430
Hans Verkuil1a023fe2014-12-04 06:54:52 -0300431 if (sel->target != V4L2_SEL_TGT_CROP)
432 return -EINVAL;
433
Martin Hostettler251cb882011-12-17 07:10:55 -0300434 mutex_lock(&sensor->lock);
Hans Verkuilf7234132015-03-04 01:47:54 -0800435 sel->r = *__mt9m032_get_pad_crop(sensor, cfg, sel->which);
Martin Hostettler251cb882011-12-17 07:10:55 -0300436 mutex_unlock(&sensor->lock);
437
438 return 0;
439}
440
Hans Verkuil1a023fe2014-12-04 06:54:52 -0300441static int mt9m032_set_pad_selection(struct v4l2_subdev *subdev,
Hans Verkuilf7234132015-03-04 01:47:54 -0800442 struct v4l2_subdev_pad_config *cfg,
Hans Verkuil1a023fe2014-12-04 06:54:52 -0300443 struct v4l2_subdev_selection *sel)
Martin Hostettler251cb882011-12-17 07:10:55 -0300444{
445 struct mt9m032 *sensor = to_mt9m032(subdev);
446 struct v4l2_mbus_framefmt *format;
447 struct v4l2_rect *__crop;
448 struct v4l2_rect rect;
449 int ret = 0;
450
Hans Verkuil1a023fe2014-12-04 06:54:52 -0300451 if (sel->target != V4L2_SEL_TGT_CROP)
452 return -EINVAL;
453
Martin Hostettler251cb882011-12-17 07:10:55 -0300454 mutex_lock(&sensor->lock);
455
Hans Verkuil1a023fe2014-12-04 06:54:52 -0300456 if (sensor->streaming && sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
Martin Hostettler251cb882011-12-17 07:10:55 -0300457 ret = -EBUSY;
458 goto done;
459 }
460
461 /* Clamp the crop rectangle boundaries and align them to a multiple of 2
462 * pixels to ensure a GRBG Bayer pattern.
463 */
Hans Verkuil1a023fe2014-12-04 06:54:52 -0300464 rect.left = clamp(ALIGN(sel->r.left, 2), MT9M032_COLUMN_START_MIN,
Martin Hostettler251cb882011-12-17 07:10:55 -0300465 MT9M032_COLUMN_START_MAX);
Hans Verkuil1a023fe2014-12-04 06:54:52 -0300466 rect.top = clamp(ALIGN(sel->r.top, 2), MT9M032_ROW_START_MIN,
Martin Hostettler251cb882011-12-17 07:10:55 -0300467 MT9M032_ROW_START_MAX);
Hans Verkuil1a023fe2014-12-04 06:54:52 -0300468 rect.width = clamp_t(unsigned int, ALIGN(sel->r.width, 2),
Ricardo Ribaldaf90580c2013-11-26 05:31:42 -0300469 MT9M032_COLUMN_SIZE_MIN, MT9M032_COLUMN_SIZE_MAX);
Hans Verkuil1a023fe2014-12-04 06:54:52 -0300470 rect.height = clamp_t(unsigned int, ALIGN(sel->r.height, 2),
Ricardo Ribaldaf90580c2013-11-26 05:31:42 -0300471 MT9M032_ROW_SIZE_MIN, MT9M032_ROW_SIZE_MAX);
Martin Hostettler251cb882011-12-17 07:10:55 -0300472
Ricardo Ribaldaf90580c2013-11-26 05:31:42 -0300473 rect.width = min_t(unsigned int, rect.width,
474 MT9M032_PIXEL_ARRAY_WIDTH - rect.left);
475 rect.height = min_t(unsigned int, rect.height,
476 MT9M032_PIXEL_ARRAY_HEIGHT - rect.top);
Martin Hostettler251cb882011-12-17 07:10:55 -0300477
Hans Verkuilf7234132015-03-04 01:47:54 -0800478 __crop = __mt9m032_get_pad_crop(sensor, cfg, sel->which);
Martin Hostettler251cb882011-12-17 07:10:55 -0300479
480 if (rect.width != __crop->width || rect.height != __crop->height) {
481 /* Reset the output image size if the crop rectangle size has
482 * been modified.
483 */
Hans Verkuilf7234132015-03-04 01:47:54 -0800484 format = __mt9m032_get_pad_format(sensor, cfg, sel->which);
Martin Hostettler251cb882011-12-17 07:10:55 -0300485 format->width = rect.width;
486 format->height = rect.height;
487 }
488
489 *__crop = rect;
Hans Verkuil1a023fe2014-12-04 06:54:52 -0300490 sel->r = rect;
Martin Hostettler251cb882011-12-17 07:10:55 -0300491
Hans Verkuil1a023fe2014-12-04 06:54:52 -0300492 if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE)
Martin Hostettler251cb882011-12-17 07:10:55 -0300493 ret = mt9m032_update_geom_timing(sensor);
494
495done:
496 mutex_unlock(&sensor->lock);
497 return ret;
498}
499
500static int mt9m032_get_frame_interval(struct v4l2_subdev *subdev,
501 struct v4l2_subdev_frame_interval *fi)
502{
503 struct mt9m032 *sensor = to_mt9m032(subdev);
504
505 mutex_lock(&sensor->lock);
506 memset(fi, 0, sizeof(*fi));
507 fi->interval = sensor->frame_interval;
508 mutex_unlock(&sensor->lock);
509
510 return 0;
511}
512
513static int mt9m032_set_frame_interval(struct v4l2_subdev *subdev,
514 struct v4l2_subdev_frame_interval *fi)
515{
516 struct mt9m032 *sensor = to_mt9m032(subdev);
517 int ret;
518
519 mutex_lock(&sensor->lock);
520
521 if (sensor->streaming) {
522 ret = -EBUSY;
523 goto done;
524 }
525
526 /* Avoid divisions by 0. */
527 if (fi->interval.denominator == 0)
528 fi->interval.denominator = 1;
529
530 ret = mt9m032_update_timing(sensor, &fi->interval);
531 if (!ret)
532 sensor->frame_interval = fi->interval;
533
534done:
535 mutex_unlock(&sensor->lock);
536 return ret;
537}
538
539static int mt9m032_s_stream(struct v4l2_subdev *subdev, int streaming)
540{
541 struct mt9m032 *sensor = to_mt9m032(subdev);
542 int ret;
543
544 mutex_lock(&sensor->lock);
545 ret = update_formatter2(sensor, streaming);
546 if (!ret)
547 sensor->streaming = streaming;
548 mutex_unlock(&sensor->lock);
549
550 return ret;
551}
552
553/* -----------------------------------------------------------------------------
554 * V4L2 subdev core operations
555 */
556
557#ifdef CONFIG_VIDEO_ADV_DEBUG
558static int mt9m032_g_register(struct v4l2_subdev *sd,
559 struct v4l2_dbg_register *reg)
560{
561 struct mt9m032 *sensor = to_mt9m032(sd);
562 struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
563 int val;
564
Hans Verkuile1277112013-05-29 06:59:51 -0300565 if (reg->reg > 0xff)
Martin Hostettler251cb882011-12-17 07:10:55 -0300566 return -EINVAL;
Martin Hostettler251cb882011-12-17 07:10:55 -0300567
568 val = mt9m032_read(client, reg->reg);
569 if (val < 0)
570 return -EIO;
571
572 reg->size = 2;
573 reg->val = val;
574
575 return 0;
576}
577
578static int mt9m032_s_register(struct v4l2_subdev *sd,
Hans Verkuil977ba3b2013-03-24 08:28:46 -0300579 const struct v4l2_dbg_register *reg)
Martin Hostettler251cb882011-12-17 07:10:55 -0300580{
581 struct mt9m032 *sensor = to_mt9m032(sd);
582 struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
583
Hans Verkuile1277112013-05-29 06:59:51 -0300584 if (reg->reg > 0xff)
Martin Hostettler251cb882011-12-17 07:10:55 -0300585 return -EINVAL;
586
Martin Hostettler251cb882011-12-17 07:10:55 -0300587 return mt9m032_write(client, reg->reg, reg->val);
588}
589#endif
590
591/* -----------------------------------------------------------------------------
592 * V4L2 subdev control operations
593 */
594
595static int update_read_mode2(struct mt9m032 *sensor, bool vflip, bool hflip)
596{
597 struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
598 int reg_val = (vflip << MT9M032_READ_MODE2_VFLIP_SHIFT)
599 | (hflip << MT9M032_READ_MODE2_HFLIP_SHIFT)
600 | MT9M032_READ_MODE2_ROW_BLC
601 | 0x0007;
602
603 return mt9m032_write(client, MT9M032_READ_MODE2, reg_val);
604}
605
606static int mt9m032_set_gain(struct mt9m032 *sensor, s32 val)
607{
608 struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
609 int digital_gain_val; /* in 1/8th (0..127) */
610 int analog_mul; /* 0 or 1 */
611 int analog_gain_val; /* in 1/16th. (0..63) */
612 u16 reg_val;
613
614 digital_gain_val = 51; /* from setup example */
615
616 if (val < 63) {
617 analog_mul = 0;
618 analog_gain_val = val;
619 } else {
620 analog_mul = 1;
621 analog_gain_val = val / 2;
622 }
623
624 /* a_gain = (1 + analog_mul) + (analog_gain_val + 1) / 16 */
625 /* overall_gain = a_gain * (1 + digital_gain_val / 8) */
626
627 reg_val = ((digital_gain_val & MT9M032_GAIN_DIGITAL_MASK)
628 << MT9M032_GAIN_DIGITAL_SHIFT)
629 | ((analog_mul & 1) << MT9M032_GAIN_AMUL_SHIFT)
630 | (analog_gain_val & MT9M032_GAIN_ANALOG_MASK);
631
632 return mt9m032_write(client, MT9M032_GAIN_ALL, reg_val);
633}
634
635static int mt9m032_try_ctrl(struct v4l2_ctrl *ctrl)
636{
637 if (ctrl->id == V4L2_CID_GAIN && ctrl->val >= 63) {
638 /* round because of multiplier used for values >= 63 */
639 ctrl->val &= ~1;
640 }
641
642 return 0;
643}
644
645static int mt9m032_set_ctrl(struct v4l2_ctrl *ctrl)
646{
647 struct mt9m032 *sensor =
648 container_of(ctrl->handler, struct mt9m032, ctrls);
649 struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
650 int ret;
651
652 switch (ctrl->id) {
653 case V4L2_CID_GAIN:
654 return mt9m032_set_gain(sensor, ctrl->val);
655
656 case V4L2_CID_HFLIP:
657 /* case V4L2_CID_VFLIP: -- In the same cluster */
658 return update_read_mode2(sensor, sensor->vflip->val,
659 sensor->hflip->val);
660
661 case V4L2_CID_EXPOSURE:
662 ret = mt9m032_write(client, MT9M032_SHUTTER_WIDTH_HIGH,
663 (ctrl->val >> 16) & 0xffff);
664 if (ret < 0)
665 return ret;
666
667 return mt9m032_write(client, MT9M032_SHUTTER_WIDTH_LOW,
668 ctrl->val & 0xffff);
669 }
670
671 return 0;
672}
673
Julia Lawall217bdb02015-11-13 20:05:17 -0200674static const struct v4l2_ctrl_ops mt9m032_ctrl_ops = {
Martin Hostettler251cb882011-12-17 07:10:55 -0300675 .s_ctrl = mt9m032_set_ctrl,
676 .try_ctrl = mt9m032_try_ctrl,
677};
678
679/* -------------------------------------------------------------------------- */
680
681static const struct v4l2_subdev_core_ops mt9m032_core_ops = {
682#ifdef CONFIG_VIDEO_ADV_DEBUG
683 .g_register = mt9m032_g_register,
684 .s_register = mt9m032_s_register,
685#endif
686};
687
688static const struct v4l2_subdev_video_ops mt9m032_video_ops = {
689 .s_stream = mt9m032_s_stream,
690 .g_frame_interval = mt9m032_get_frame_interval,
691 .s_frame_interval = mt9m032_set_frame_interval,
692};
693
694static const struct v4l2_subdev_pad_ops mt9m032_pad_ops = {
695 .enum_mbus_code = mt9m032_enum_mbus_code,
696 .enum_frame_size = mt9m032_enum_frame_size,
697 .get_fmt = mt9m032_get_pad_format,
698 .set_fmt = mt9m032_set_pad_format,
Hans Verkuil1a023fe2014-12-04 06:54:52 -0300699 .set_selection = mt9m032_set_pad_selection,
700 .get_selection = mt9m032_get_pad_selection,
Martin Hostettler251cb882011-12-17 07:10:55 -0300701};
702
703static const struct v4l2_subdev_ops mt9m032_ops = {
704 .core = &mt9m032_core_ops,
705 .video = &mt9m032_video_ops,
706 .pad = &mt9m032_pad_ops,
707};
708
709/* -----------------------------------------------------------------------------
710 * Driver initialization and probing
711 */
712
713static int mt9m032_probe(struct i2c_client *client,
714 const struct i2c_device_id *devid)
715{
Laurent Pinchart5472d3f2012-05-09 09:55:59 -0300716 struct mt9m032_platform_data *pdata = client->dev.platform_data;
Martin Hostettler251cb882011-12-17 07:10:55 -0300717 struct i2c_adapter *adapter = client->adapter;
718 struct mt9m032 *sensor;
719 int chip_version;
720 int ret;
721
Laurent Pinchart5472d3f2012-05-09 09:55:59 -0300722 if (pdata == NULL) {
723 dev_err(&client->dev, "No platform data\n");
724 return -EINVAL;
725 }
726
Martin Hostettler251cb882011-12-17 07:10:55 -0300727 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
728 dev_warn(&client->dev,
729 "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n");
730 return -EIO;
731 }
732
733 if (!client->dev.platform_data)
734 return -ENODEV;
735
Laurent Pinchartc02b2112013-05-02 08:29:43 -0300736 sensor = devm_kzalloc(&client->dev, sizeof(*sensor), GFP_KERNEL);
Martin Hostettler251cb882011-12-17 07:10:55 -0300737 if (sensor == NULL)
738 return -ENOMEM;
739
740 mutex_init(&sensor->lock);
741
Laurent Pinchart5472d3f2012-05-09 09:55:59 -0300742 sensor->pdata = pdata;
Martin Hostettler251cb882011-12-17 07:10:55 -0300743
744 v4l2_i2c_subdev_init(&sensor->subdev, client, &mt9m032_ops);
745 sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
746
747 chip_version = mt9m032_read(client, MT9M032_CHIP_VERSION);
748 if (chip_version != MT9M032_CHIP_VERSION_VALUE) {
749 dev_err(&client->dev, "MT9M032 not detected, wrong version "
750 "0x%04x\n", chip_version);
751 ret = -ENODEV;
752 goto error_sensor;
753 }
754
755 dev_info(&client->dev, "MT9M032 detected at address 0x%02x\n",
756 client->addr);
757
758 sensor->frame_interval.numerator = 1;
759 sensor->frame_interval.denominator = 30;
760
761 sensor->crop.left = MT9M032_COLUMN_START_DEF;
762 sensor->crop.top = MT9M032_ROW_START_DEF;
763 sensor->crop.width = MT9M032_COLUMN_SIZE_DEF;
764 sensor->crop.height = MT9M032_ROW_SIZE_DEF;
765
766 sensor->format.width = sensor->crop.width;
767 sensor->format.height = sensor->crop.height;
Boris BREZILLONf5fe58f2014-11-10 14:28:29 -0300768 sensor->format.code = MEDIA_BUS_FMT_Y8_1X8;
Martin Hostettler251cb882011-12-17 07:10:55 -0300769 sensor->format.field = V4L2_FIELD_NONE;
770 sensor->format.colorspace = V4L2_COLORSPACE_SRGB;
771
Laurent Pinchart5472d3f2012-05-09 09:55:59 -0300772 v4l2_ctrl_handler_init(&sensor->ctrls, 5);
Martin Hostettler251cb882011-12-17 07:10:55 -0300773
774 v4l2_ctrl_new_std(&sensor->ctrls, &mt9m032_ctrl_ops,
775 V4L2_CID_GAIN, 0, 127, 1, 64);
776
777 sensor->hflip = v4l2_ctrl_new_std(&sensor->ctrls,
778 &mt9m032_ctrl_ops,
779 V4L2_CID_HFLIP, 0, 1, 1, 0);
780 sensor->vflip = v4l2_ctrl_new_std(&sensor->ctrls,
781 &mt9m032_ctrl_ops,
782 V4L2_CID_VFLIP, 0, 1, 1, 0);
783
784 v4l2_ctrl_new_std(&sensor->ctrls, &mt9m032_ctrl_ops,
785 V4L2_CID_EXPOSURE, MT9M032_SHUTTER_WIDTH_MIN,
786 MT9M032_SHUTTER_WIDTH_MAX, 1,
787 MT9M032_SHUTTER_WIDTH_DEF);
Laurent Pinchart5472d3f2012-05-09 09:55:59 -0300788 v4l2_ctrl_new_std(&sensor->ctrls, &mt9m032_ctrl_ops,
789 V4L2_CID_PIXEL_RATE, pdata->pix_clock,
790 pdata->pix_clock, 1, pdata->pix_clock);
Martin Hostettler251cb882011-12-17 07:10:55 -0300791
792 if (sensor->ctrls.error) {
793 ret = sensor->ctrls.error;
794 dev_err(&client->dev, "control initialization error %d\n", ret);
795 goto error_ctrl;
796 }
797
798 v4l2_ctrl_cluster(2, &sensor->hflip);
799
800 sensor->subdev.ctrl_handler = &sensor->ctrls;
801 sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
Mauro Carvalho Chehabab22e772015-12-11 07:44:40 -0200802 ret = media_entity_pads_init(&sensor->subdev.entity, 1, &sensor->pad);
Martin Hostettler251cb882011-12-17 07:10:55 -0300803 if (ret < 0)
804 goto error_ctrl;
805
806 ret = mt9m032_write(client, MT9M032_RESET, 1); /* reset on */
807 if (ret < 0)
808 goto error_entity;
Julia Lawall612cd9e2012-08-18 17:25:56 -0300809 ret = mt9m032_write(client, MT9M032_RESET, 0); /* reset off */
Martin Hostettler251cb882011-12-17 07:10:55 -0300810 if (ret < 0)
811 goto error_entity;
812
813 ret = mt9m032_setup_pll(sensor);
814 if (ret < 0)
815 goto error_entity;
816 usleep_range(10000, 11000);
817
818 ret = v4l2_ctrl_handler_setup(&sensor->ctrls);
819 if (ret < 0)
820 goto error_entity;
821
822 /* SIZE */
823 ret = mt9m032_update_geom_timing(sensor);
824 if (ret < 0)
825 goto error_entity;
826
827 ret = mt9m032_write(client, 0x41, 0x0000); /* reserved !!! */
828 if (ret < 0)
829 goto error_entity;
830 ret = mt9m032_write(client, 0x42, 0x0003); /* reserved !!! */
831 if (ret < 0)
832 goto error_entity;
833 ret = mt9m032_write(client, 0x43, 0x0003); /* reserved !!! */
834 if (ret < 0)
835 goto error_entity;
836 ret = mt9m032_write(client, 0x7f, 0x0000); /* reserved !!! */
837 if (ret < 0)
838 goto error_entity;
839 if (sensor->pdata->invert_pixclock) {
840 ret = mt9m032_write(client, MT9M032_PIX_CLK_CTRL,
841 MT9M032_PIX_CLK_CTRL_INV_PIXCLK);
842 if (ret < 0)
843 goto error_entity;
844 }
845
846 ret = mt9m032_write(client, MT9M032_RESTART, 1); /* Restart on */
847 if (ret < 0)
848 goto error_entity;
849 msleep(100);
850 ret = mt9m032_write(client, MT9M032_RESTART, 0); /* Restart off */
851 if (ret < 0)
852 goto error_entity;
853 msleep(100);
854 ret = update_formatter2(sensor, false);
855 if (ret < 0)
856 goto error_entity;
857
858 return ret;
859
860error_entity:
861 media_entity_cleanup(&sensor->subdev.entity);
862error_ctrl:
863 v4l2_ctrl_handler_free(&sensor->ctrls);
864error_sensor:
865 mutex_destroy(&sensor->lock);
Martin Hostettler251cb882011-12-17 07:10:55 -0300866 return ret;
867}
868
869static int mt9m032_remove(struct i2c_client *client)
870{
871 struct v4l2_subdev *subdev = i2c_get_clientdata(client);
872 struct mt9m032 *sensor = to_mt9m032(subdev);
873
Guennadi Liakhovetskib22b9f32012-04-18 05:00:52 -0300874 v4l2_device_unregister_subdev(subdev);
Martin Hostettler251cb882011-12-17 07:10:55 -0300875 v4l2_ctrl_handler_free(&sensor->ctrls);
Guennadi Liakhovetskib22b9f32012-04-18 05:00:52 -0300876 media_entity_cleanup(&subdev->entity);
Martin Hostettler251cb882011-12-17 07:10:55 -0300877 mutex_destroy(&sensor->lock);
Martin Hostettler251cb882011-12-17 07:10:55 -0300878 return 0;
879}
880
881static const struct i2c_device_id mt9m032_id_table[] = {
882 { MT9M032_NAME, 0 },
883 { }
884};
885
886MODULE_DEVICE_TABLE(i2c, mt9m032_id_table);
887
888static struct i2c_driver mt9m032_i2c_driver = {
889 .driver = {
890 .name = MT9M032_NAME,
891 },
892 .probe = mt9m032_probe,
893 .remove = mt9m032_remove,
894 .id_table = mt9m032_id_table,
895};
896
897module_i2c_driver(mt9m032_i2c_driver);
898
899MODULE_AUTHOR("Martin Hostettler <martin@neutronstar.dyndns.org>");
900MODULE_DESCRIPTION("MT9M032 camera sensor driver");
901MODULE_LICENSE("GPL v2");