blob: faee11383cb70d7833737ffd7c368ceacbcb50ae [file] [log] [blame]
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001/*
2 * Driver for Samsung S5K6AAFX SXGA 1/6" 1.3M CMOS Image Sensor
3 * with embedded SoC ISP.
4 *
5 * Copyright (C) 2011, Samsung Electronics Co., Ltd.
6 * Sylwester Nawrocki <s.nawrocki@samsung.com>
7 *
8 * Based on a driver authored by Dongsoo Nathaniel Kim.
9 * Copyright (C) 2009, Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
15 */
16
17#include <linux/clk.h>
18#include <linux/delay.h>
19#include <linux/gpio.h>
20#include <linux/i2c.h>
21#include <linux/media.h>
Paul Gortmaker6aec1872011-11-08 14:56:50 -050022#include <linux/module.h>
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -030023#include <linux/regulator/consumer.h>
24#include <linux/slab.h>
25
26#include <media/media-entity.h>
27#include <media/v4l2-ctrls.h>
28#include <media/v4l2-device.h>
29#include <media/v4l2-subdev.h>
30#include <media/v4l2-mediabus.h>
Mauro Carvalho Chehabb5dcee22015-11-10 12:01:44 -020031#include <media/i2c/s5k6aa.h>
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -030032
33static int debug;
34module_param(debug, int, 0644);
35
36#define DRIVER_NAME "S5K6AA"
37
38/* The token to indicate array termination */
39#define S5K6AA_TERM 0xffff
40#define S5K6AA_OUT_WIDTH_DEF 640
41#define S5K6AA_OUT_HEIGHT_DEF 480
42#define S5K6AA_WIN_WIDTH_MAX 1280
43#define S5K6AA_WIN_HEIGHT_MAX 1024
44#define S5K6AA_WIN_WIDTH_MIN 8
45#define S5K6AA_WIN_HEIGHT_MIN 8
46
47/*
48 * H/W register Interface (0xD0000000 - 0xD0000FFF)
49 */
50#define AHB_MSB_ADDR_PTR 0xfcfc
51#define GEN_REG_OFFSH 0xd000
52#define REG_CMDWR_ADDRH 0x0028
53#define REG_CMDWR_ADDRL 0x002a
54#define REG_CMDRD_ADDRH 0x002c
55#define REG_CMDRD_ADDRL 0x002e
56#define REG_CMDBUF0_ADDR 0x0f12
57#define REG_CMDBUF1_ADDR 0x0f10
58
59/*
60 * Host S/W Register interface (0x70000000 - 0x70002000)
61 * The value of the two most significant address bytes is 0x7000,
62 * (HOST_SWIF_OFFS_H). The register addresses below specify 2 LSBs.
63 */
64#define HOST_SWIF_OFFSH 0x7000
65
66/* Initialization parameters */
67/* Master clock frequency in KHz */
68#define REG_I_INCLK_FREQ_L 0x01b8
69#define REG_I_INCLK_FREQ_H 0x01ba
70#define MIN_MCLK_FREQ_KHZ 6000U
71#define MAX_MCLK_FREQ_KHZ 27000U
72#define REG_I_USE_NPVI_CLOCKS 0x01c6
73#define REG_I_USE_NMIPI_CLOCKS 0x01c8
74
75/* Clock configurations, n = 0..2. REG_I_* frequency unit is 4 kHz. */
76#define REG_I_OPCLK_4KHZ(n) ((n) * 6 + 0x01cc)
77#define REG_I_MIN_OUTRATE_4KHZ(n) ((n) * 6 + 0x01ce)
78#define REG_I_MAX_OUTRATE_4KHZ(n) ((n) * 6 + 0x01d0)
79#define SYS_PLL_OUT_FREQ (48000000 / 4000)
80#define PCLK_FREQ_MIN (24000000 / 4000)
81#define PCLK_FREQ_MAX (48000000 / 4000)
82#define REG_I_INIT_PARAMS_UPDATED 0x01e0
83#define REG_I_ERROR_INFO 0x01e2
84
85/* General purpose parameters */
86#define REG_USER_BRIGHTNESS 0x01e4
87#define REG_USER_CONTRAST 0x01e6
88#define REG_USER_SATURATION 0x01e8
89#define REG_USER_SHARPBLUR 0x01ea
90
91#define REG_G_SPEC_EFFECTS 0x01ee
92#define REG_G_ENABLE_PREV 0x01f0
93#define REG_G_ENABLE_PREV_CHG 0x01f2
94#define REG_G_NEW_CFG_SYNC 0x01f8
95#define REG_G_PREVZOOM_IN_WIDTH 0x020a
96#define REG_G_PREVZOOM_IN_HEIGHT 0x020c
97#define REG_G_PREVZOOM_IN_XOFFS 0x020e
98#define REG_G_PREVZOOM_IN_YOFFS 0x0210
99#define REG_G_INPUTS_CHANGE_REQ 0x021a
100#define REG_G_ACTIVE_PREV_CFG 0x021c
101#define REG_G_PREV_CFG_CHG 0x021e
102#define REG_G_PREV_OPEN_AFTER_CH 0x0220
103#define REG_G_PREV_CFG_ERROR 0x0222
104
105/* Preview control section. n = 0...4. */
106#define PREG(n, x) ((n) * 0x26 + x)
107#define REG_P_OUT_WIDTH(n) PREG(n, 0x0242)
108#define REG_P_OUT_HEIGHT(n) PREG(n, 0x0244)
109#define REG_P_FMT(n) PREG(n, 0x0246)
110#define REG_P_MAX_OUT_RATE(n) PREG(n, 0x0248)
111#define REG_P_MIN_OUT_RATE(n) PREG(n, 0x024a)
112#define REG_P_PVI_MASK(n) PREG(n, 0x024c)
113#define REG_P_CLK_INDEX(n) PREG(n, 0x024e)
114#define REG_P_FR_RATE_TYPE(n) PREG(n, 0x0250)
115#define FR_RATE_DYNAMIC 0
116#define FR_RATE_FIXED 1
117#define FR_RATE_FIXED_ACCURATE 2
118#define REG_P_FR_RATE_Q_TYPE(n) PREG(n, 0x0252)
119#define FR_RATE_Q_BEST_FRRATE 1 /* Binning enabled */
120#define FR_RATE_Q_BEST_QUALITY 2 /* Binning disabled */
121/* Frame period in 0.1 ms units */
122#define REG_P_MAX_FR_TIME(n) PREG(n, 0x0254)
123#define REG_P_MIN_FR_TIME(n) PREG(n, 0x0256)
124/* Conversion to REG_P_[MAX/MIN]_FR_TIME value; __t: time in us */
125#define US_TO_FR_TIME(__t) ((__t) / 100)
126#define S5K6AA_MIN_FR_TIME 33300 /* us */
127#define S5K6AA_MAX_FR_TIME 650000 /* us */
128#define S5K6AA_MAX_HIGHRES_FR_TIME 666 /* x100 us */
129/* The below 5 registers are for "device correction" values */
130#define REG_P_COLORTEMP(n) PREG(n, 0x025e)
131#define REG_P_PREV_MIRROR(n) PREG(n, 0x0262)
132
133/* Extended image property controls */
134/* Exposure time in 10 us units */
135#define REG_SF_USR_EXPOSURE_L 0x03c6
136#define REG_SF_USR_EXPOSURE_H 0x03c8
137#define REG_SF_USR_EXPOSURE_CHG 0x03ca
138#define REG_SF_USR_TOT_GAIN 0x03cc
139#define REG_SF_USR_TOT_GAIN_CHG 0x03ce
140#define REG_SF_RGAIN 0x03d0
141#define REG_SF_RGAIN_CHG 0x03d2
142#define REG_SF_GGAIN 0x03d4
143#define REG_SF_GGAIN_CHG 0x03d6
144#define REG_SF_BGAIN 0x03d8
145#define REG_SF_BGAIN_CHG 0x03da
146#define REG_SF_FLICKER_QUANT 0x03dc
147#define REG_SF_FLICKER_QUANT_CHG 0x03de
148
149/* Output interface (parallel/MIPI) setup */
150#define REG_OIF_EN_MIPI_LANES 0x03fa
151#define REG_OIF_EN_PACKETS 0x03fc
152#define REG_OIF_CFG_CHG 0x03fe
153
154/* Auto-algorithms enable mask */
155#define REG_DBG_AUTOALG_EN 0x0400
156#define AALG_ALL_EN_MASK (1 << 0)
157#define AALG_AE_EN_MASK (1 << 1)
158#define AALG_DIVLEI_EN_MASK (1 << 2)
159#define AALG_WB_EN_MASK (1 << 3)
160#define AALG_FLICKER_EN_MASK (1 << 5)
161#define AALG_FIT_EN_MASK (1 << 6)
162#define AALG_WRHW_EN_MASK (1 << 7)
163
164/* Firmware revision information */
165#define REG_FW_APIVER 0x012e
166#define S5K6AAFX_FW_APIVER 0x0001
167#define REG_FW_REVISION 0x0130
168
169/* For now we use only one user configuration register set */
170#define S5K6AA_MAX_PRESETS 1
171
172static const char * const s5k6aa_supply_names[] = {
173 "vdd_core", /* Digital core supply 1.5V (1.4V to 1.6V) */
174 "vdda", /* Analog power supply 2.8V (2.6V to 3.0V) */
175 "vdd_reg", /* Regulator input power 1.8V (1.7V to 1.9V)
176 or 2.8V (2.6V to 3.0) */
177 "vddio", /* I/O supply 1.8V (1.65V to 1.95V)
178 or 2.8V (2.5V to 3.1V) */
179};
180#define S5K6AA_NUM_SUPPLIES ARRAY_SIZE(s5k6aa_supply_names)
181
182enum s5k6aa_gpio_id {
183 STBY,
184 RST,
185 GPIO_NUM,
186};
187
188struct s5k6aa_regval {
189 u16 addr;
190 u16 val;
191};
192
193struct s5k6aa_pixfmt {
Boris BREZILLONf5fe58f2014-11-10 14:28:29 -0300194 u32 code;
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -0300195 u32 colorspace;
196 /* REG_P_FMT(x) register value */
197 u16 reg_p_fmt;
198};
199
200struct s5k6aa_preset {
201 /* output pixel format and resolution */
202 struct v4l2_mbus_framefmt mbus_fmt;
203 u8 clk_id;
204 u8 index;
205};
206
207struct s5k6aa_ctrls {
208 struct v4l2_ctrl_handler handler;
209 /* Auto / manual white balance cluster */
210 struct v4l2_ctrl *awb;
211 struct v4l2_ctrl *gain_red;
212 struct v4l2_ctrl *gain_blue;
213 struct v4l2_ctrl *gain_green;
214 /* Mirror cluster */
215 struct v4l2_ctrl *hflip;
216 struct v4l2_ctrl *vflip;
217 /* Auto exposure / manual exposure and gain cluster */
218 struct v4l2_ctrl *auto_exp;
219 struct v4l2_ctrl *exposure;
220 struct v4l2_ctrl *gain;
221};
222
223struct s5k6aa_interval {
224 u16 reg_fr_time;
225 struct v4l2_fract interval;
226 /* Maximum rectangle for the interval */
227 struct v4l2_frmsize_discrete size;
228};
229
230struct s5k6aa {
231 struct v4l2_subdev sd;
232 struct media_pad pad;
233
234 enum v4l2_mbus_type bus_type;
235 u8 mipi_lanes;
236
237 int (*s_power)(int enable);
238 struct regulator_bulk_data supplies[S5K6AA_NUM_SUPPLIES];
239 struct s5k6aa_gpio gpio[GPIO_NUM];
240
241 /* external master clock frequency */
242 unsigned long mclk_frequency;
243 /* ISP internal master clock frequency */
244 u16 clk_fop;
245 /* output pixel clock frequency range */
246 u16 pclk_fmin;
247 u16 pclk_fmax;
248
249 unsigned int inv_hflip:1;
250 unsigned int inv_vflip:1;
251
252 /* protects the struct members below */
253 struct mutex lock;
254
255 /* sensor matrix scan window */
256 struct v4l2_rect ccd_rect;
257
258 struct s5k6aa_ctrls ctrls;
259 struct s5k6aa_preset presets[S5K6AA_MAX_PRESETS];
260 struct s5k6aa_preset *preset;
261 const struct s5k6aa_interval *fiv;
262
263 unsigned int streaming:1;
264 unsigned int apply_cfg:1;
265 unsigned int apply_crop:1;
266 unsigned int power;
267};
268
269static struct s5k6aa_regval s5k6aa_analog_config[] = {
270 /* Analog settings */
271 { 0x112a, 0x0000 }, { 0x1132, 0x0000 },
272 { 0x113e, 0x0000 }, { 0x115c, 0x0000 },
273 { 0x1164, 0x0000 }, { 0x1174, 0x0000 },
274 { 0x1178, 0x0000 }, { 0x077a, 0x0000 },
275 { 0x077c, 0x0000 }, { 0x077e, 0x0000 },
276 { 0x0780, 0x0000 }, { 0x0782, 0x0000 },
277 { 0x0784, 0x0000 }, { 0x0786, 0x0000 },
278 { 0x0788, 0x0000 }, { 0x07a2, 0x0000 },
279 { 0x07a4, 0x0000 }, { 0x07a6, 0x0000 },
280 { 0x07a8, 0x0000 }, { 0x07b6, 0x0000 },
281 { 0x07b8, 0x0002 }, { 0x07ba, 0x0004 },
282 { 0x07bc, 0x0004 }, { 0x07be, 0x0005 },
283 { 0x07c0, 0x0005 }, { S5K6AA_TERM, 0 },
284};
285
286/* TODO: Add RGB888 and Bayer format */
287static const struct s5k6aa_pixfmt s5k6aa_formats[] = {
Boris BREZILLONf5fe58f2014-11-10 14:28:29 -0300288 { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG, 5 },
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -0300289 /* range 16-240 */
Boris BREZILLONf5fe58f2014-11-10 14:28:29 -0300290 { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_REC709, 6 },
291 { MEDIA_BUS_FMT_RGB565_2X8_BE, V4L2_COLORSPACE_JPEG, 0 },
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -0300292};
293
294static const struct s5k6aa_interval s5k6aa_intervals[] = {
295 { 1000, {10000, 1000000}, {1280, 1024} }, /* 10 fps */
296 { 666, {15000, 1000000}, {1280, 1024} }, /* 15 fps */
297 { 500, {20000, 1000000}, {1280, 720} }, /* 20 fps */
298 { 400, {25000, 1000000}, {640, 480} }, /* 25 fps */
299 { 333, {33300, 1000000}, {640, 480} }, /* 30 fps */
300};
301
302#define S5K6AA_INTERVAL_DEF_INDEX 1 /* 15 fps */
303
304static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl)
305{
306 return &container_of(ctrl->handler, struct s5k6aa, ctrls.handler)->sd;
307}
308
309static inline struct s5k6aa *to_s5k6aa(struct v4l2_subdev *sd)
310{
311 return container_of(sd, struct s5k6aa, sd);
312}
313
314/* Set initial values for all preview presets */
315static void s5k6aa_presets_data_init(struct s5k6aa *s5k6aa)
316{
317 struct s5k6aa_preset *preset = &s5k6aa->presets[0];
318 int i;
319
320 for (i = 0; i < S5K6AA_MAX_PRESETS; i++) {
321 preset->mbus_fmt.width = S5K6AA_OUT_WIDTH_DEF;
322 preset->mbus_fmt.height = S5K6AA_OUT_HEIGHT_DEF;
323 preset->mbus_fmt.code = s5k6aa_formats[0].code;
324 preset->index = i;
325 preset->clk_id = 0;
326 preset++;
327 }
328
329 s5k6aa->fiv = &s5k6aa_intervals[S5K6AA_INTERVAL_DEF_INDEX];
330 s5k6aa->preset = &s5k6aa->presets[0];
331}
332
333static int s5k6aa_i2c_read(struct i2c_client *client, u16 addr, u16 *val)
334{
335 u8 wbuf[2] = {addr >> 8, addr & 0xFF};
336 struct i2c_msg msg[2];
337 u8 rbuf[2];
338 int ret;
339
340 msg[0].addr = client->addr;
341 msg[0].flags = 0;
342 msg[0].len = 2;
343 msg[0].buf = wbuf;
344
345 msg[1].addr = client->addr;
346 msg[1].flags = I2C_M_RD;
347 msg[1].len = 2;
348 msg[1].buf = rbuf;
349
350 ret = i2c_transfer(client->adapter, msg, 2);
Hans Verkuil7c7586b2014-12-13 08:52:59 -0300351 *val = be16_to_cpu(*((__be16 *)rbuf));
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -0300352
353 v4l2_dbg(3, debug, client, "i2c_read: 0x%04X : 0x%04x\n", addr, *val);
354
355 return ret == 2 ? 0 : ret;
356}
357
358static int s5k6aa_i2c_write(struct i2c_client *client, u16 addr, u16 val)
359{
360 u8 buf[4] = {addr >> 8, addr & 0xFF, val >> 8, val & 0xFF};
361
362 int ret = i2c_master_send(client, buf, 4);
363 v4l2_dbg(3, debug, client, "i2c_write: 0x%04X : 0x%04x\n", addr, val);
364
365 return ret == 4 ? 0 : ret;
366}
367
368/* The command register write, assumes Command_Wr_addH = 0x7000. */
369static int s5k6aa_write(struct i2c_client *c, u16 addr, u16 val)
370{
371 int ret = s5k6aa_i2c_write(c, REG_CMDWR_ADDRL, addr);
372 if (ret)
373 return ret;
374 return s5k6aa_i2c_write(c, REG_CMDBUF0_ADDR, val);
375}
376
377/* The command register read, assumes Command_Rd_addH = 0x7000. */
378static int s5k6aa_read(struct i2c_client *client, u16 addr, u16 *val)
379{
380 int ret = s5k6aa_i2c_write(client, REG_CMDRD_ADDRL, addr);
381 if (ret)
382 return ret;
383 return s5k6aa_i2c_read(client, REG_CMDBUF0_ADDR, val);
384}
385
386static int s5k6aa_write_array(struct v4l2_subdev *sd,
387 const struct s5k6aa_regval *msg)
388{
389 struct i2c_client *client = v4l2_get_subdevdata(sd);
390 u16 addr_incr = 0;
391 int ret = 0;
392
393 while (msg->addr != S5K6AA_TERM) {
394 if (addr_incr != 2)
395 ret = s5k6aa_i2c_write(client, REG_CMDWR_ADDRL,
396 msg->addr);
397 if (ret)
398 break;
399 ret = s5k6aa_i2c_write(client, REG_CMDBUF0_ADDR, msg->val);
400 if (ret)
401 break;
402 /* Assume that msg->addr is always less than 0xfffc */
403 addr_incr = (msg + 1)->addr - msg->addr;
404 msg++;
405 }
406
407 return ret;
408}
409
410/* Configure the AHB high address bytes for GTG registers access */
411static int s5k6aa_set_ahb_address(struct i2c_client *client)
412{
413 int ret = s5k6aa_i2c_write(client, AHB_MSB_ADDR_PTR, GEN_REG_OFFSH);
414 if (ret)
415 return ret;
416 ret = s5k6aa_i2c_write(client, REG_CMDRD_ADDRH, HOST_SWIF_OFFSH);
417 if (ret)
418 return ret;
419 return s5k6aa_i2c_write(client, REG_CMDWR_ADDRH, HOST_SWIF_OFFSH);
420}
421
422/**
423 * s5k6aa_configure_pixel_clock - apply ISP main clock/PLL configuration
424 *
425 * Configure the internal ISP PLL for the required output frequency.
426 * Locking: called with s5k6aa.lock mutex held.
427 */
428static int s5k6aa_configure_pixel_clocks(struct s5k6aa *s5k6aa)
429{
430 struct i2c_client *c = v4l2_get_subdevdata(&s5k6aa->sd);
431 unsigned long fmclk = s5k6aa->mclk_frequency / 1000;
432 u16 status;
433 int ret;
434
435 if (WARN(fmclk < MIN_MCLK_FREQ_KHZ || fmclk > MAX_MCLK_FREQ_KHZ,
436 "Invalid clock frequency: %ld\n", fmclk))
437 return -EINVAL;
438
439 s5k6aa->pclk_fmin = PCLK_FREQ_MIN;
440 s5k6aa->pclk_fmax = PCLK_FREQ_MAX;
441 s5k6aa->clk_fop = SYS_PLL_OUT_FREQ;
442
443 /* External input clock frequency in kHz */
444 ret = s5k6aa_write(c, REG_I_INCLK_FREQ_H, fmclk >> 16);
445 if (!ret)
446 ret = s5k6aa_write(c, REG_I_INCLK_FREQ_L, fmclk & 0xFFFF);
447 if (!ret)
448 ret = s5k6aa_write(c, REG_I_USE_NPVI_CLOCKS, 1);
449 /* Internal PLL frequency */
450 if (!ret)
451 ret = s5k6aa_write(c, REG_I_OPCLK_4KHZ(0), s5k6aa->clk_fop);
452 if (!ret)
453 ret = s5k6aa_write(c, REG_I_MIN_OUTRATE_4KHZ(0),
454 s5k6aa->pclk_fmin);
455 if (!ret)
456 ret = s5k6aa_write(c, REG_I_MAX_OUTRATE_4KHZ(0),
457 s5k6aa->pclk_fmax);
458 if (!ret)
459 ret = s5k6aa_write(c, REG_I_INIT_PARAMS_UPDATED, 1);
460 if (!ret)
461 ret = s5k6aa_read(c, REG_I_ERROR_INFO, &status);
462
463 return ret ? ret : (status ? -EINVAL : 0);
464}
465
466/* Set horizontal and vertical image flipping */
467static int s5k6aa_set_mirror(struct s5k6aa *s5k6aa, int horiz_flip)
468{
469 struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
470 int index = s5k6aa->preset->index;
471
472 unsigned int vflip = s5k6aa->ctrls.vflip->val ^ s5k6aa->inv_vflip;
473 unsigned int flip = (horiz_flip ^ s5k6aa->inv_hflip) | (vflip << 1);
474
475 return s5k6aa_write(client, REG_P_PREV_MIRROR(index), flip);
476}
477
478/* Configure auto/manual white balance and R/G/B gains */
479static int s5k6aa_set_awb(struct s5k6aa *s5k6aa, int awb)
480{
481 struct i2c_client *c = v4l2_get_subdevdata(&s5k6aa->sd);
482 struct s5k6aa_ctrls *ctrls = &s5k6aa->ctrls;
483 u16 reg;
484
485 int ret = s5k6aa_read(c, REG_DBG_AUTOALG_EN, &reg);
486
487 if (!ret && !awb) {
488 ret = s5k6aa_write(c, REG_SF_RGAIN, ctrls->gain_red->val);
489 if (!ret)
490 ret = s5k6aa_write(c, REG_SF_RGAIN_CHG, 1);
491 if (ret)
492 return ret;
493
494 ret = s5k6aa_write(c, REG_SF_GGAIN, ctrls->gain_green->val);
495 if (!ret)
496 ret = s5k6aa_write(c, REG_SF_GGAIN_CHG, 1);
497 if (ret)
498 return ret;
499
500 ret = s5k6aa_write(c, REG_SF_BGAIN, ctrls->gain_blue->val);
501 if (!ret)
502 ret = s5k6aa_write(c, REG_SF_BGAIN_CHG, 1);
503 }
504 if (!ret) {
505 reg = awb ? reg | AALG_WB_EN_MASK : reg & ~AALG_WB_EN_MASK;
506 ret = s5k6aa_write(c, REG_DBG_AUTOALG_EN, reg);
507 }
508
509 return ret;
510}
511
512/* Program FW with exposure time, 'exposure' in us units */
513static int s5k6aa_set_user_exposure(struct i2c_client *client, int exposure)
514{
515 unsigned int time = exposure / 10;
516
517 int ret = s5k6aa_write(client, REG_SF_USR_EXPOSURE_L, time & 0xffff);
518 if (!ret)
519 ret = s5k6aa_write(client, REG_SF_USR_EXPOSURE_H, time >> 16);
520 if (ret)
521 return ret;
522 return s5k6aa_write(client, REG_SF_USR_EXPOSURE_CHG, 1);
523}
524
525static int s5k6aa_set_user_gain(struct i2c_client *client, int gain)
526{
527 int ret = s5k6aa_write(client, REG_SF_USR_TOT_GAIN, gain);
528 if (ret)
529 return ret;
530 return s5k6aa_write(client, REG_SF_USR_TOT_GAIN_CHG, 1);
531}
532
533/* Set auto/manual exposure and total gain */
534static int s5k6aa_set_auto_exposure(struct s5k6aa *s5k6aa, int value)
535{
536 struct i2c_client *c = v4l2_get_subdevdata(&s5k6aa->sd);
537 unsigned int exp_time = s5k6aa->ctrls.exposure->val;
538 u16 auto_alg;
539
540 int ret = s5k6aa_read(c, REG_DBG_AUTOALG_EN, &auto_alg);
541 if (ret)
542 return ret;
543
544 v4l2_dbg(1, debug, c, "man_exp: %d, auto_exp: %d, a_alg: 0x%x\n",
545 exp_time, value, auto_alg);
546
547 if (value == V4L2_EXPOSURE_AUTO) {
548 auto_alg |= AALG_AE_EN_MASK | AALG_DIVLEI_EN_MASK;
549 } else {
550 ret = s5k6aa_set_user_exposure(c, exp_time);
551 if (ret)
552 return ret;
553 ret = s5k6aa_set_user_gain(c, s5k6aa->ctrls.gain->val);
554 if (ret)
555 return ret;
556 auto_alg &= ~(AALG_AE_EN_MASK | AALG_DIVLEI_EN_MASK);
557 }
558
559 return s5k6aa_write(c, REG_DBG_AUTOALG_EN, auto_alg);
560}
561
562static int s5k6aa_set_anti_flicker(struct s5k6aa *s5k6aa, int value)
563{
564 struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
565 u16 auto_alg;
566 int ret;
567
568 ret = s5k6aa_read(client, REG_DBG_AUTOALG_EN, &auto_alg);
569 if (ret)
570 return ret;
571
572 if (value == V4L2_CID_POWER_LINE_FREQUENCY_AUTO) {
573 auto_alg |= AALG_FLICKER_EN_MASK;
574 } else {
575 auto_alg &= ~AALG_FLICKER_EN_MASK;
576 /* The V4L2_CID_LINE_FREQUENCY control values match
577 * the register values */
578 ret = s5k6aa_write(client, REG_SF_FLICKER_QUANT, value);
579 if (ret)
580 return ret;
581 ret = s5k6aa_write(client, REG_SF_FLICKER_QUANT_CHG, 1);
582 if (ret)
583 return ret;
584 }
585
586 return s5k6aa_write(client, REG_DBG_AUTOALG_EN, auto_alg);
587}
588
589static int s5k6aa_set_colorfx(struct s5k6aa *s5k6aa, int val)
590{
591 struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
592 static const struct v4l2_control colorfx[] = {
593 { V4L2_COLORFX_NONE, 0 },
594 { V4L2_COLORFX_BW, 1 },
595 { V4L2_COLORFX_NEGATIVE, 2 },
596 { V4L2_COLORFX_SEPIA, 3 },
597 { V4L2_COLORFX_SKY_BLUE, 4 },
598 { V4L2_COLORFX_SKETCH, 5 },
599 };
600 int i;
601
602 for (i = 0; i < ARRAY_SIZE(colorfx); i++) {
603 if (colorfx[i].id == val)
604 return s5k6aa_write(client, REG_G_SPEC_EFFECTS,
605 colorfx[i].value);
606 }
607 return -EINVAL;
608}
609
610static int s5k6aa_preview_config_status(struct i2c_client *client)
611{
612 u16 error = 0;
613 int ret = s5k6aa_read(client, REG_G_PREV_CFG_ERROR, &error);
614
615 v4l2_dbg(1, debug, client, "error: 0x%x (%d)\n", error, ret);
616 return ret ? ret : (error ? -EINVAL : 0);
617}
618
619static int s5k6aa_get_pixfmt_index(struct s5k6aa *s5k6aa,
620 struct v4l2_mbus_framefmt *mf)
621{
622 unsigned int i;
623
624 for (i = 0; i < ARRAY_SIZE(s5k6aa_formats); i++)
625 if (mf->colorspace == s5k6aa_formats[i].colorspace &&
626 mf->code == s5k6aa_formats[i].code)
627 return i;
628 return 0;
629}
630
631static int s5k6aa_set_output_framefmt(struct s5k6aa *s5k6aa,
632 struct s5k6aa_preset *preset)
633{
634 struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
635 int fmt_index = s5k6aa_get_pixfmt_index(s5k6aa, &preset->mbus_fmt);
636 int ret;
637
638 ret = s5k6aa_write(client, REG_P_OUT_WIDTH(preset->index),
639 preset->mbus_fmt.width);
640 if (!ret)
641 ret = s5k6aa_write(client, REG_P_OUT_HEIGHT(preset->index),
642 preset->mbus_fmt.height);
643 if (!ret)
644 ret = s5k6aa_write(client, REG_P_FMT(preset->index),
645 s5k6aa_formats[fmt_index].reg_p_fmt);
646 return ret;
647}
648
649static int s5k6aa_set_input_params(struct s5k6aa *s5k6aa)
650{
651 struct i2c_client *c = v4l2_get_subdevdata(&s5k6aa->sd);
652 struct v4l2_rect *r = &s5k6aa->ccd_rect;
653 int ret;
654
655 ret = s5k6aa_write(c, REG_G_PREVZOOM_IN_WIDTH, r->width);
656 if (!ret)
657 ret = s5k6aa_write(c, REG_G_PREVZOOM_IN_HEIGHT, r->height);
658 if (!ret)
659 ret = s5k6aa_write(c, REG_G_PREVZOOM_IN_XOFFS, r->left);
660 if (!ret)
661 ret = s5k6aa_write(c, REG_G_PREVZOOM_IN_YOFFS, r->top);
662 if (!ret)
663 ret = s5k6aa_write(c, REG_G_INPUTS_CHANGE_REQ, 1);
664 if (!ret)
665 s5k6aa->apply_crop = 0;
666
667 return ret;
668}
669
670/**
671 * s5k6aa_configure_video_bus - configure the video output interface
672 * @bus_type: video bus type: parallel or MIPI-CSI
673 * @nlanes: number of MIPI lanes to be used (MIPI-CSI only)
674 *
675 * Note: Only parallel bus operation has been tested.
676 */
677static int s5k6aa_configure_video_bus(struct s5k6aa *s5k6aa,
678 enum v4l2_mbus_type bus_type, int nlanes)
679{
680 struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
681 u16 cfg = 0;
682 int ret;
683
684 /*
685 * TODO: The sensor is supposed to support BT.601 and BT.656
686 * but there is nothing indicating how to switch between both
687 * in the datasheet. For now default BT.601 interface is assumed.
688 */
689 if (bus_type == V4L2_MBUS_CSI2)
690 cfg = nlanes;
691 else if (bus_type != V4L2_MBUS_PARALLEL)
692 return -EINVAL;
693
694 ret = s5k6aa_write(client, REG_OIF_EN_MIPI_LANES, cfg);
695 if (ret)
696 return ret;
697 return s5k6aa_write(client, REG_OIF_CFG_CHG, 1);
698}
699
700/* This function should be called when switching to new user configuration set*/
701static int s5k6aa_new_config_sync(struct i2c_client *client, int timeout,
702 int cid)
703{
704 unsigned long end = jiffies + msecs_to_jiffies(timeout);
705 u16 reg = 1;
706 int ret;
707
708 ret = s5k6aa_write(client, REG_G_ACTIVE_PREV_CFG, cid);
709 if (!ret)
710 ret = s5k6aa_write(client, REG_G_PREV_CFG_CHG, 1);
711 if (!ret)
712 ret = s5k6aa_write(client, REG_G_NEW_CFG_SYNC, 1);
713 if (timeout == 0)
714 return ret;
715
716 while (ret >= 0 && time_is_after_jiffies(end)) {
717 ret = s5k6aa_read(client, REG_G_NEW_CFG_SYNC, &reg);
718 if (!reg)
719 return 0;
720 usleep_range(1000, 5000);
721 }
722 return ret ? ret : -ETIMEDOUT;
723}
724
725/**
726 * s5k6aa_set_prev_config - write user preview register set
727 *
728 * Configure output resolution and color fromat, pixel clock
729 * frequency range, device frame rate type and frame period range.
730 */
731static int s5k6aa_set_prev_config(struct s5k6aa *s5k6aa,
732 struct s5k6aa_preset *preset)
733{
734 struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
735 int idx = preset->index;
736 u16 frame_rate_q;
737 int ret;
738
739 if (s5k6aa->fiv->reg_fr_time >= S5K6AA_MAX_HIGHRES_FR_TIME)
740 frame_rate_q = FR_RATE_Q_BEST_FRRATE;
741 else
742 frame_rate_q = FR_RATE_Q_BEST_QUALITY;
743
744 ret = s5k6aa_set_output_framefmt(s5k6aa, preset);
745 if (!ret)
746 ret = s5k6aa_write(client, REG_P_MAX_OUT_RATE(idx),
747 s5k6aa->pclk_fmax);
748 if (!ret)
749 ret = s5k6aa_write(client, REG_P_MIN_OUT_RATE(idx),
750 s5k6aa->pclk_fmin);
751 if (!ret)
752 ret = s5k6aa_write(client, REG_P_CLK_INDEX(idx),
753 preset->clk_id);
754 if (!ret)
755 ret = s5k6aa_write(client, REG_P_FR_RATE_TYPE(idx),
756 FR_RATE_DYNAMIC);
757 if (!ret)
758 ret = s5k6aa_write(client, REG_P_FR_RATE_Q_TYPE(idx),
759 frame_rate_q);
760 if (!ret)
761 ret = s5k6aa_write(client, REG_P_MAX_FR_TIME(idx),
762 s5k6aa->fiv->reg_fr_time + 33);
763 if (!ret)
764 ret = s5k6aa_write(client, REG_P_MIN_FR_TIME(idx),
765 s5k6aa->fiv->reg_fr_time - 33);
766 if (!ret)
767 ret = s5k6aa_new_config_sync(client, 250, idx);
768 if (!ret)
769 ret = s5k6aa_preview_config_status(client);
770 if (!ret)
771 s5k6aa->apply_cfg = 0;
772
773 v4l2_dbg(1, debug, client, "Frame interval: %d +/- 3.3ms. (%d)\n",
774 s5k6aa->fiv->reg_fr_time, ret);
775 return ret;
776}
777
778/**
779 * s5k6aa_initialize_isp - basic ISP MCU initialization
780 *
781 * Configure AHB addresses for registers read/write; configure PLLs for
782 * required output pixel clock. The ISP power supply needs to be already
783 * enabled, with an optional H/W reset.
784 * Locking: called with s5k6aa.lock mutex held.
785 */
786static int s5k6aa_initialize_isp(struct v4l2_subdev *sd)
787{
788 struct i2c_client *client = v4l2_get_subdevdata(sd);
789 struct s5k6aa *s5k6aa = to_s5k6aa(sd);
790 int ret;
791
792 s5k6aa->apply_crop = 1;
793 s5k6aa->apply_cfg = 1;
794 msleep(100);
795
796 ret = s5k6aa_set_ahb_address(client);
797 if (ret)
798 return ret;
799 ret = s5k6aa_configure_video_bus(s5k6aa, s5k6aa->bus_type,
800 s5k6aa->mipi_lanes);
801 if (ret)
802 return ret;
803 ret = s5k6aa_write_array(sd, s5k6aa_analog_config);
804 if (ret)
805 return ret;
806 msleep(20);
807
808 return s5k6aa_configure_pixel_clocks(s5k6aa);
809}
810
811static int s5k6aa_gpio_set_value(struct s5k6aa *priv, int id, u32 val)
812{
813 if (!gpio_is_valid(priv->gpio[id].gpio))
814 return 0;
815 gpio_set_value(priv->gpio[id].gpio, !!val);
816 return 1;
817}
818
819static int s5k6aa_gpio_assert(struct s5k6aa *priv, int id)
820{
821 return s5k6aa_gpio_set_value(priv, id, priv->gpio[id].level);
822}
823
824static int s5k6aa_gpio_deassert(struct s5k6aa *priv, int id)
825{
826 return s5k6aa_gpio_set_value(priv, id, !priv->gpio[id].level);
827}
828
829static int __s5k6aa_power_on(struct s5k6aa *s5k6aa)
830{
831 int ret;
832
833 ret = regulator_bulk_enable(S5K6AA_NUM_SUPPLIES, s5k6aa->supplies);
834 if (ret)
835 return ret;
836 if (s5k6aa_gpio_deassert(s5k6aa, STBY))
837 usleep_range(150, 200);
838
839 if (s5k6aa->s_power)
840 ret = s5k6aa->s_power(1);
841 usleep_range(4000, 4000);
842
843 if (s5k6aa_gpio_deassert(s5k6aa, RST))
844 msleep(20);
845
846 return ret;
847}
848
849static int __s5k6aa_power_off(struct s5k6aa *s5k6aa)
850{
851 int ret;
852
853 if (s5k6aa_gpio_assert(s5k6aa, RST))
854 usleep_range(100, 150);
855
856 if (s5k6aa->s_power) {
857 ret = s5k6aa->s_power(0);
858 if (ret)
859 return ret;
860 }
861 if (s5k6aa_gpio_assert(s5k6aa, STBY))
862 usleep_range(50, 100);
863 s5k6aa->streaming = 0;
864
865 return regulator_bulk_disable(S5K6AA_NUM_SUPPLIES, s5k6aa->supplies);
866}
867
868/*
869 * V4L2 subdev core and video operations
870 */
871static int s5k6aa_set_power(struct v4l2_subdev *sd, int on)
872{
873 struct s5k6aa *s5k6aa = to_s5k6aa(sd);
874 int ret = 0;
875
876 mutex_lock(&s5k6aa->lock);
877
Hans Verkuil874c65f2015-04-27 04:29:51 -0300878 if (s5k6aa->power == !on) {
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -0300879 if (on) {
880 ret = __s5k6aa_power_on(s5k6aa);
881 if (!ret)
882 ret = s5k6aa_initialize_isp(sd);
883 } else {
884 ret = __s5k6aa_power_off(s5k6aa);
885 }
886
887 if (!ret)
888 s5k6aa->power += on ? 1 : -1;
889 }
890
891 mutex_unlock(&s5k6aa->lock);
892
893 if (!on || ret || s5k6aa->power != 1)
894 return ret;
895
896 return v4l2_ctrl_handler_setup(sd->ctrl_handler);
897}
898
899static int __s5k6aa_stream(struct s5k6aa *s5k6aa, int enable)
900{
901 struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
902 int ret = 0;
903
904 ret = s5k6aa_write(client, REG_G_ENABLE_PREV, enable);
905 if (!ret)
906 ret = s5k6aa_write(client, REG_G_ENABLE_PREV_CHG, 1);
907 if (!ret)
908 s5k6aa->streaming = enable;
909
910 return ret;
911}
912
913static int s5k6aa_s_stream(struct v4l2_subdev *sd, int on)
914{
915 struct s5k6aa *s5k6aa = to_s5k6aa(sd);
916 int ret = 0;
917
918 mutex_lock(&s5k6aa->lock);
919
920 if (s5k6aa->streaming == !on) {
921 if (!ret && s5k6aa->apply_cfg)
922 ret = s5k6aa_set_prev_config(s5k6aa, s5k6aa->preset);
923 if (s5k6aa->apply_crop)
924 ret = s5k6aa_set_input_params(s5k6aa);
925 if (!ret)
926 ret = __s5k6aa_stream(s5k6aa, !!on);
927 }
928 mutex_unlock(&s5k6aa->lock);
929
930 return ret;
931}
932
933static int s5k6aa_g_frame_interval(struct v4l2_subdev *sd,
934 struct v4l2_subdev_frame_interval *fi)
935{
936 struct s5k6aa *s5k6aa = to_s5k6aa(sd);
937
938 mutex_lock(&s5k6aa->lock);
939 fi->interval = s5k6aa->fiv->interval;
940 mutex_unlock(&s5k6aa->lock);
941
942 return 0;
943}
944
945static int __s5k6aa_set_frame_interval(struct s5k6aa *s5k6aa,
946 struct v4l2_subdev_frame_interval *fi)
947{
948 struct v4l2_mbus_framefmt *mbus_fmt = &s5k6aa->preset->mbus_fmt;
949 const struct s5k6aa_interval *fiv = &s5k6aa_intervals[0];
950 unsigned int err, min_err = UINT_MAX;
951 unsigned int i, fr_time;
952
953 if (fi->interval.denominator == 0)
954 return -EINVAL;
955
956 fr_time = fi->interval.numerator * 10000 / fi->interval.denominator;
957
958 for (i = 0; i < ARRAY_SIZE(s5k6aa_intervals); i++) {
959 const struct s5k6aa_interval *iv = &s5k6aa_intervals[i];
960
961 if (mbus_fmt->width > iv->size.width ||
962 mbus_fmt->height > iv->size.height)
963 continue;
964
965 err = abs(iv->reg_fr_time - fr_time);
966 if (err < min_err) {
967 fiv = iv;
968 min_err = err;
969 }
970 }
971 s5k6aa->fiv = fiv;
972
973 v4l2_dbg(1, debug, &s5k6aa->sd, "Changed frame interval to %d us\n",
974 fiv->reg_fr_time * 100);
975 return 0;
976}
977
978static int s5k6aa_s_frame_interval(struct v4l2_subdev *sd,
979 struct v4l2_subdev_frame_interval *fi)
980{
981 struct s5k6aa *s5k6aa = to_s5k6aa(sd);
982 int ret;
983
984 v4l2_dbg(1, debug, sd, "Setting %d/%d frame interval\n",
985 fi->interval.numerator, fi->interval.denominator);
986
987 mutex_lock(&s5k6aa->lock);
988 ret = __s5k6aa_set_frame_interval(s5k6aa, fi);
989 s5k6aa->apply_cfg = 1;
990
991 mutex_unlock(&s5k6aa->lock);
992 return ret;
993}
994
995/*
996 * V4L2 subdev pad level and video operations
997 */
998static int s5k6aa_enum_frame_interval(struct v4l2_subdev *sd,
Hans Verkuilf7234132015-03-04 01:47:54 -0800999 struct v4l2_subdev_pad_config *cfg,
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001000 struct v4l2_subdev_frame_interval_enum *fie)
1001{
1002 struct s5k6aa *s5k6aa = to_s5k6aa(sd);
1003 const struct s5k6aa_interval *fi;
1004 int ret = 0;
1005
Dan Carpenter174e60a2013-08-23 05:33:06 -03001006 if (fie->index >= ARRAY_SIZE(s5k6aa_intervals))
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001007 return -EINVAL;
1008
1009 v4l_bound_align_image(&fie->width, S5K6AA_WIN_WIDTH_MIN,
1010 S5K6AA_WIN_WIDTH_MAX, 1,
1011 &fie->height, S5K6AA_WIN_HEIGHT_MIN,
1012 S5K6AA_WIN_HEIGHT_MAX, 1, 0);
1013
1014 mutex_lock(&s5k6aa->lock);
1015 fi = &s5k6aa_intervals[fie->index];
1016 if (fie->width > fi->size.width || fie->height > fi->size.height)
1017 ret = -EINVAL;
1018 else
1019 fie->interval = fi->interval;
1020 mutex_unlock(&s5k6aa->lock);
1021
1022 return ret;
1023}
1024
1025static int s5k6aa_enum_mbus_code(struct v4l2_subdev *sd,
Hans Verkuilf7234132015-03-04 01:47:54 -08001026 struct v4l2_subdev_pad_config *cfg,
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001027 struct v4l2_subdev_mbus_code_enum *code)
1028{
1029 if (code->index >= ARRAY_SIZE(s5k6aa_formats))
1030 return -EINVAL;
1031
1032 code->code = s5k6aa_formats[code->index].code;
1033 return 0;
1034}
1035
1036static int s5k6aa_enum_frame_size(struct v4l2_subdev *sd,
Hans Verkuilf7234132015-03-04 01:47:54 -08001037 struct v4l2_subdev_pad_config *cfg,
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001038 struct v4l2_subdev_frame_size_enum *fse)
1039{
1040 int i = ARRAY_SIZE(s5k6aa_formats);
1041
1042 if (fse->index > 0)
1043 return -EINVAL;
1044
1045 while (--i)
1046 if (fse->code == s5k6aa_formats[i].code)
1047 break;
1048
1049 fse->code = s5k6aa_formats[i].code;
1050 fse->min_width = S5K6AA_WIN_WIDTH_MIN;
1051 fse->max_width = S5K6AA_WIN_WIDTH_MAX;
1052 fse->max_height = S5K6AA_WIN_HEIGHT_MIN;
1053 fse->min_height = S5K6AA_WIN_HEIGHT_MAX;
1054
1055 return 0;
1056}
1057
1058static struct v4l2_rect *
Hans Verkuilf7234132015-03-04 01:47:54 -08001059__s5k6aa_get_crop_rect(struct s5k6aa *s5k6aa, struct v4l2_subdev_pad_config *cfg,
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001060 enum v4l2_subdev_format_whence which)
1061{
1062 if (which == V4L2_SUBDEV_FORMAT_ACTIVE)
1063 return &s5k6aa->ccd_rect;
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001064
Sylwester Nawrocki94c15b52012-09-26 05:45:21 -03001065 WARN_ON(which != V4L2_SUBDEV_FORMAT_TRY);
Hans Verkuilf7234132015-03-04 01:47:54 -08001066 return v4l2_subdev_get_try_crop(&s5k6aa->sd, cfg, 0);
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001067}
1068
1069static void s5k6aa_try_format(struct s5k6aa *s5k6aa,
1070 struct v4l2_mbus_framefmt *mf)
1071{
1072 unsigned int index;
1073
1074 v4l_bound_align_image(&mf->width, S5K6AA_WIN_WIDTH_MIN,
1075 S5K6AA_WIN_WIDTH_MAX, 1,
1076 &mf->height, S5K6AA_WIN_HEIGHT_MIN,
1077 S5K6AA_WIN_HEIGHT_MAX, 1, 0);
1078
1079 if (mf->colorspace != V4L2_COLORSPACE_JPEG &&
1080 mf->colorspace != V4L2_COLORSPACE_REC709)
1081 mf->colorspace = V4L2_COLORSPACE_JPEG;
1082
1083 index = s5k6aa_get_pixfmt_index(s5k6aa, mf);
1084
1085 mf->colorspace = s5k6aa_formats[index].colorspace;
1086 mf->code = s5k6aa_formats[index].code;
1087 mf->field = V4L2_FIELD_NONE;
1088}
1089
Hans Verkuilf7234132015-03-04 01:47:54 -08001090static int s5k6aa_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001091 struct v4l2_subdev_format *fmt)
1092{
1093 struct s5k6aa *s5k6aa = to_s5k6aa(sd);
1094 struct v4l2_mbus_framefmt *mf;
1095
1096 memset(fmt->reserved, 0, sizeof(fmt->reserved));
1097
1098 if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
Hans Verkuilf7234132015-03-04 01:47:54 -08001099 mf = v4l2_subdev_get_try_format(sd, cfg, 0);
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001100 fmt->format = *mf;
1101 return 0;
1102 }
1103
1104 mutex_lock(&s5k6aa->lock);
1105 fmt->format = s5k6aa->preset->mbus_fmt;
1106 mutex_unlock(&s5k6aa->lock);
1107
1108 return 0;
1109}
1110
Hans Verkuilf7234132015-03-04 01:47:54 -08001111static int s5k6aa_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001112 struct v4l2_subdev_format *fmt)
1113{
1114 struct s5k6aa *s5k6aa = to_s5k6aa(sd);
1115 struct s5k6aa_preset *preset = s5k6aa->preset;
1116 struct v4l2_mbus_framefmt *mf;
1117 struct v4l2_rect *crop;
1118 int ret = 0;
1119
1120 mutex_lock(&s5k6aa->lock);
1121 s5k6aa_try_format(s5k6aa, &fmt->format);
1122
1123 if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
Hans Verkuilf7234132015-03-04 01:47:54 -08001124 mf = v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
1125 crop = v4l2_subdev_get_try_crop(sd, cfg, 0);
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001126 } else {
1127 if (s5k6aa->streaming) {
1128 ret = -EBUSY;
1129 } else {
1130 mf = &preset->mbus_fmt;
1131 crop = &s5k6aa->ccd_rect;
1132 s5k6aa->apply_cfg = 1;
1133 }
1134 }
1135
1136 if (ret == 0) {
1137 struct v4l2_subdev_frame_interval fiv = {
1138 .interval = {0, 1}
1139 };
1140
1141 *mf = fmt->format;
1142 /*
1143 * Make sure the crop window is valid, i.e. its size is
1144 * greater than the output window, as the ISP supports
1145 * only down-scaling.
1146 */
1147 crop->width = clamp_t(unsigned int, crop->width, mf->width,
1148 S5K6AA_WIN_WIDTH_MAX);
1149 crop->height = clamp_t(unsigned int, crop->height, mf->height,
1150 S5K6AA_WIN_HEIGHT_MAX);
1151 crop->left = clamp_t(unsigned int, crop->left, 0,
1152 S5K6AA_WIN_WIDTH_MAX - crop->width);
1153 crop->top = clamp_t(unsigned int, crop->top, 0,
1154 S5K6AA_WIN_HEIGHT_MAX - crop->height);
1155
1156 /* Reset to minimum possible frame interval */
1157 ret = __s5k6aa_set_frame_interval(s5k6aa, &fiv);
1158 }
1159 mutex_unlock(&s5k6aa->lock);
1160
1161 return ret;
1162}
1163
Hans Verkuil1a023fe2014-12-04 06:54:52 -03001164static int s5k6aa_get_selection(struct v4l2_subdev *sd,
Hans Verkuilf7234132015-03-04 01:47:54 -08001165 struct v4l2_subdev_pad_config *cfg,
Hans Verkuil1a023fe2014-12-04 06:54:52 -03001166 struct v4l2_subdev_selection *sel)
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001167{
1168 struct s5k6aa *s5k6aa = to_s5k6aa(sd);
1169 struct v4l2_rect *rect;
1170
Hans Verkuil1a023fe2014-12-04 06:54:52 -03001171 if (sel->target != V4L2_SEL_TGT_CROP)
1172 return -EINVAL;
1173
1174 memset(sel->reserved, 0, sizeof(sel->reserved));
Sylwester Nawrocki94c15b52012-09-26 05:45:21 -03001175
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001176 mutex_lock(&s5k6aa->lock);
Hans Verkuilf7234132015-03-04 01:47:54 -08001177 rect = __s5k6aa_get_crop_rect(s5k6aa, cfg, sel->which);
Hans Verkuil1a023fe2014-12-04 06:54:52 -03001178 sel->r = *rect;
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001179 mutex_unlock(&s5k6aa->lock);
1180
1181 v4l2_dbg(1, debug, sd, "Current crop rectangle: (%d,%d)/%dx%d\n",
1182 rect->left, rect->top, rect->width, rect->height);
1183
1184 return 0;
1185}
1186
Hans Verkuil1a023fe2014-12-04 06:54:52 -03001187static int s5k6aa_set_selection(struct v4l2_subdev *sd,
Hans Verkuilf7234132015-03-04 01:47:54 -08001188 struct v4l2_subdev_pad_config *cfg,
Hans Verkuil1a023fe2014-12-04 06:54:52 -03001189 struct v4l2_subdev_selection *sel)
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001190{
1191 struct s5k6aa *s5k6aa = to_s5k6aa(sd);
1192 struct v4l2_mbus_framefmt *mf;
1193 unsigned int max_x, max_y;
1194 struct v4l2_rect *crop_r;
1195
Hans Verkuil1a023fe2014-12-04 06:54:52 -03001196 if (sel->target != V4L2_SEL_TGT_CROP)
1197 return -EINVAL;
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001198
Hans Verkuil1a023fe2014-12-04 06:54:52 -03001199 mutex_lock(&s5k6aa->lock);
Hans Verkuilf7234132015-03-04 01:47:54 -08001200 crop_r = __s5k6aa_get_crop_rect(s5k6aa, cfg, sel->which);
Hans Verkuil1a023fe2014-12-04 06:54:52 -03001201
1202 if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001203 mf = &s5k6aa->preset->mbus_fmt;
1204 s5k6aa->apply_crop = 1;
1205 } else {
Hans Verkuilf7234132015-03-04 01:47:54 -08001206 mf = v4l2_subdev_get_try_format(sd, cfg, 0);
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001207 }
Hans Verkuil1a023fe2014-12-04 06:54:52 -03001208 v4l_bound_align_image(&sel->r.width, mf->width,
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001209 S5K6AA_WIN_WIDTH_MAX, 1,
Hans Verkuil1a023fe2014-12-04 06:54:52 -03001210 &sel->r.height, mf->height,
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001211 S5K6AA_WIN_HEIGHT_MAX, 1, 0);
1212
Hans Verkuil1a023fe2014-12-04 06:54:52 -03001213 max_x = (S5K6AA_WIN_WIDTH_MAX - sel->r.width) & ~1;
1214 max_y = (S5K6AA_WIN_HEIGHT_MAX - sel->r.height) & ~1;
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001215
Hans Verkuil1a023fe2014-12-04 06:54:52 -03001216 sel->r.left = clamp_t(unsigned int, sel->r.left, 0, max_x);
1217 sel->r.top = clamp_t(unsigned int, sel->r.top, 0, max_y);
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001218
Hans Verkuil1a023fe2014-12-04 06:54:52 -03001219 *crop_r = sel->r;
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001220
1221 mutex_unlock(&s5k6aa->lock);
1222
1223 v4l2_dbg(1, debug, sd, "Set crop rectangle: (%d,%d)/%dx%d\n",
1224 crop_r->left, crop_r->top, crop_r->width, crop_r->height);
1225
1226 return 0;
1227}
1228
1229static const struct v4l2_subdev_pad_ops s5k6aa_pad_ops = {
1230 .enum_mbus_code = s5k6aa_enum_mbus_code,
1231 .enum_frame_size = s5k6aa_enum_frame_size,
1232 .enum_frame_interval = s5k6aa_enum_frame_interval,
1233 .get_fmt = s5k6aa_get_fmt,
1234 .set_fmt = s5k6aa_set_fmt,
Hans Verkuil1a023fe2014-12-04 06:54:52 -03001235 .get_selection = s5k6aa_get_selection,
1236 .set_selection = s5k6aa_set_selection,
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001237};
1238
1239static const struct v4l2_subdev_video_ops s5k6aa_video_ops = {
1240 .g_frame_interval = s5k6aa_g_frame_interval,
1241 .s_frame_interval = s5k6aa_s_frame_interval,
1242 .s_stream = s5k6aa_s_stream,
1243};
1244
1245/*
1246 * V4L2 subdev controls
1247 */
1248
1249static int s5k6aa_s_ctrl(struct v4l2_ctrl *ctrl)
1250{
1251 struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
1252 struct i2c_client *client = v4l2_get_subdevdata(sd);
1253 struct s5k6aa *s5k6aa = to_s5k6aa(sd);
1254 int idx, err = 0;
1255
1256 v4l2_dbg(1, debug, sd, "ctrl: 0x%x, value: %d\n", ctrl->id, ctrl->val);
1257
1258 mutex_lock(&s5k6aa->lock);
1259 /*
1260 * If the device is not powered up by the host driver do
1261 * not apply any controls to H/W at this time. Instead
1262 * the controls will be restored right after power-up.
1263 */
1264 if (s5k6aa->power == 0)
1265 goto unlock;
1266 idx = s5k6aa->preset->index;
1267
1268 switch (ctrl->id) {
1269 case V4L2_CID_AUTO_WHITE_BALANCE:
1270 err = s5k6aa_set_awb(s5k6aa, ctrl->val);
1271 break;
1272
1273 case V4L2_CID_BRIGHTNESS:
1274 err = s5k6aa_write(client, REG_USER_BRIGHTNESS, ctrl->val);
1275 break;
1276
1277 case V4L2_CID_COLORFX:
1278 err = s5k6aa_set_colorfx(s5k6aa, ctrl->val);
1279 break;
1280
1281 case V4L2_CID_CONTRAST:
1282 err = s5k6aa_write(client, REG_USER_CONTRAST, ctrl->val);
1283 break;
1284
1285 case V4L2_CID_EXPOSURE_AUTO:
1286 err = s5k6aa_set_auto_exposure(s5k6aa, ctrl->val);
1287 break;
1288
1289 case V4L2_CID_HFLIP:
1290 err = s5k6aa_set_mirror(s5k6aa, ctrl->val);
1291 if (err)
1292 break;
1293 err = s5k6aa_write(client, REG_G_PREV_CFG_CHG, 1);
1294 break;
1295
1296 case V4L2_CID_POWER_LINE_FREQUENCY:
1297 err = s5k6aa_set_anti_flicker(s5k6aa, ctrl->val);
1298 break;
1299
1300 case V4L2_CID_SATURATION:
1301 err = s5k6aa_write(client, REG_USER_SATURATION, ctrl->val);
1302 break;
1303
1304 case V4L2_CID_SHARPNESS:
1305 err = s5k6aa_write(client, REG_USER_SHARPBLUR, ctrl->val);
1306 break;
1307
1308 case V4L2_CID_WHITE_BALANCE_TEMPERATURE:
1309 err = s5k6aa_write(client, REG_P_COLORTEMP(idx), ctrl->val);
1310 if (err)
1311 break;
1312 err = s5k6aa_write(client, REG_G_PREV_CFG_CHG, 1);
1313 break;
1314 }
1315unlock:
1316 mutex_unlock(&s5k6aa->lock);
1317 return err;
1318}
1319
1320static const struct v4l2_ctrl_ops s5k6aa_ctrl_ops = {
1321 .s_ctrl = s5k6aa_s_ctrl,
1322};
1323
1324static int s5k6aa_log_status(struct v4l2_subdev *sd)
1325{
1326 v4l2_ctrl_handler_log_status(sd->ctrl_handler, sd->name);
1327 return 0;
1328}
1329
1330#define V4L2_CID_RED_GAIN (V4L2_CTRL_CLASS_CAMERA | 0x1001)
1331#define V4L2_CID_GREEN_GAIN (V4L2_CTRL_CLASS_CAMERA | 0x1002)
1332#define V4L2_CID_BLUE_GAIN (V4L2_CTRL_CLASS_CAMERA | 0x1003)
1333
1334static const struct v4l2_ctrl_config s5k6aa_ctrls[] = {
1335 {
1336 .ops = &s5k6aa_ctrl_ops,
1337 .id = V4L2_CID_RED_GAIN,
1338 .type = V4L2_CTRL_TYPE_INTEGER,
1339 .name = "Gain, Red",
1340 .min = 0,
1341 .max = 256,
1342 .def = 127,
1343 .step = 1,
1344 }, {
1345 .ops = &s5k6aa_ctrl_ops,
1346 .id = V4L2_CID_GREEN_GAIN,
1347 .type = V4L2_CTRL_TYPE_INTEGER,
1348 .name = "Gain, Green",
1349 .min = 0,
1350 .max = 256,
1351 .def = 127,
1352 .step = 1,
1353 }, {
1354 .ops = &s5k6aa_ctrl_ops,
1355 .id = V4L2_CID_BLUE_GAIN,
1356 .type = V4L2_CTRL_TYPE_INTEGER,
1357 .name = "Gain, Blue",
1358 .min = 0,
1359 .max = 256,
1360 .def = 127,
1361 .step = 1,
1362 },
1363};
1364
1365static int s5k6aa_initialize_ctrls(struct s5k6aa *s5k6aa)
1366{
1367 const struct v4l2_ctrl_ops *ops = &s5k6aa_ctrl_ops;
1368 struct s5k6aa_ctrls *ctrls = &s5k6aa->ctrls;
1369 struct v4l2_ctrl_handler *hdl = &ctrls->handler;
1370
1371 int ret = v4l2_ctrl_handler_init(hdl, 16);
1372 if (ret)
1373 return ret;
1374 /* Auto white balance cluster */
1375 ctrls->awb = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_AUTO_WHITE_BALANCE,
1376 0, 1, 1, 1);
1377 ctrls->gain_red = v4l2_ctrl_new_custom(hdl, &s5k6aa_ctrls[0], NULL);
1378 ctrls->gain_green = v4l2_ctrl_new_custom(hdl, &s5k6aa_ctrls[1], NULL);
1379 ctrls->gain_blue = v4l2_ctrl_new_custom(hdl, &s5k6aa_ctrls[2], NULL);
1380 v4l2_ctrl_auto_cluster(4, &ctrls->awb, 0, false);
1381
1382 ctrls->hflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HFLIP, 0, 1, 1, 0);
1383 ctrls->vflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VFLIP, 0, 1, 1, 0);
1384 v4l2_ctrl_cluster(2, &ctrls->hflip);
1385
1386 ctrls->auto_exp = v4l2_ctrl_new_std_menu(hdl, ops,
1387 V4L2_CID_EXPOSURE_AUTO,
1388 V4L2_EXPOSURE_MANUAL, 0, V4L2_EXPOSURE_AUTO);
1389 /* Exposure time: x 1 us */
1390 ctrls->exposure = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_EXPOSURE,
1391 0, 6000000U, 1, 100000U);
1392 /* Total gain: 256 <=> 1x */
1393 ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAIN,
1394 0, 256, 1, 256);
1395 v4l2_ctrl_auto_cluster(3, &ctrls->auto_exp, 0, false);
1396
1397 v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_POWER_LINE_FREQUENCY,
1398 V4L2_CID_POWER_LINE_FREQUENCY_AUTO, 0,
1399 V4L2_CID_POWER_LINE_FREQUENCY_AUTO);
1400
1401 v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_COLORFX,
1402 V4L2_COLORFX_SKY_BLUE, ~0x6f, V4L2_COLORFX_NONE);
1403
1404 v4l2_ctrl_new_std(hdl, ops, V4L2_CID_WHITE_BALANCE_TEMPERATURE,
1405 0, 256, 1, 0);
1406
1407 v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION, -127, 127, 1, 0);
1408 v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -127, 127, 1, 0);
1409 v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -127, 127, 1, 0);
1410 v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SHARPNESS, -127, 127, 1, 0);
1411
1412 if (hdl->error) {
1413 ret = hdl->error;
1414 v4l2_ctrl_handler_free(hdl);
1415 return ret;
1416 }
1417
1418 s5k6aa->sd.ctrl_handler = hdl;
1419 return 0;
1420}
1421
1422/*
1423 * V4L2 subdev internal operations
1424 */
1425static int s5k6aa_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
1426{
Hans Verkuilf7234132015-03-04 01:47:54 -08001427 struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(sd, fh->pad, 0);
1428 struct v4l2_rect *crop = v4l2_subdev_get_try_crop(sd, fh->pad, 0);
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001429
1430 format->colorspace = s5k6aa_formats[0].colorspace;
1431 format->code = s5k6aa_formats[0].code;
1432 format->width = S5K6AA_OUT_WIDTH_DEF;
1433 format->height = S5K6AA_OUT_HEIGHT_DEF;
1434 format->field = V4L2_FIELD_NONE;
1435
1436 crop->width = S5K6AA_WIN_WIDTH_MAX;
1437 crop->height = S5K6AA_WIN_HEIGHT_MAX;
1438 crop->left = 0;
1439 crop->top = 0;
1440
1441 return 0;
1442}
1443
Sachin Kamatb4235302012-07-26 02:23:33 -03001444static int s5k6aa_check_fw_revision(struct s5k6aa *s5k6aa)
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001445{
1446 struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
1447 u16 api_ver = 0, fw_rev = 0;
1448
1449 int ret = s5k6aa_set_ahb_address(client);
1450
1451 if (!ret)
1452 ret = s5k6aa_read(client, REG_FW_APIVER, &api_ver);
1453 if (!ret)
1454 ret = s5k6aa_read(client, REG_FW_REVISION, &fw_rev);
1455 if (ret) {
1456 v4l2_err(&s5k6aa->sd, "FW revision check failed!\n");
1457 return ret;
1458 }
1459
1460 v4l2_info(&s5k6aa->sd, "FW API ver.: 0x%X, FW rev.: 0x%X\n",
1461 api_ver, fw_rev);
1462
1463 return api_ver == S5K6AAFX_FW_APIVER ? 0 : -ENODEV;
1464}
1465
1466static int s5k6aa_registered(struct v4l2_subdev *sd)
1467{
1468 struct s5k6aa *s5k6aa = to_s5k6aa(sd);
1469 int ret;
1470
1471 mutex_lock(&s5k6aa->lock);
1472 ret = __s5k6aa_power_on(s5k6aa);
1473 if (!ret) {
1474 msleep(100);
1475 ret = s5k6aa_check_fw_revision(s5k6aa);
1476 __s5k6aa_power_off(s5k6aa);
1477 }
1478 mutex_unlock(&s5k6aa->lock);
1479
1480 return ret;
1481}
1482
1483static const struct v4l2_subdev_internal_ops s5k6aa_subdev_internal_ops = {
1484 .registered = s5k6aa_registered,
1485 .open = s5k6aa_open,
1486};
1487
1488static const struct v4l2_subdev_core_ops s5k6aa_core_ops = {
1489 .s_power = s5k6aa_set_power,
1490 .log_status = s5k6aa_log_status,
1491};
1492
1493static const struct v4l2_subdev_ops s5k6aa_subdev_ops = {
1494 .core = &s5k6aa_core_ops,
1495 .pad = &s5k6aa_pad_ops,
1496 .video = &s5k6aa_video_ops,
1497};
1498
1499/*
1500 * GPIO setup
1501 */
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001502
1503static int s5k6aa_configure_gpios(struct s5k6aa *s5k6aa,
1504 const struct s5k6aa_platform_data *pdata)
1505{
Laurent Pinchart31857e52013-05-02 08:29:43 -03001506 struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
1507 const struct s5k6aa_gpio *gpio;
1508 unsigned long flags;
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001509 int ret;
1510
1511 s5k6aa->gpio[STBY].gpio = -EINVAL;
1512 s5k6aa->gpio[RST].gpio = -EINVAL;
1513
Laurent Pinchart31857e52013-05-02 08:29:43 -03001514 gpio = &pdata->gpio_stby;
1515 if (gpio_is_valid(gpio->gpio)) {
1516 flags = (gpio->level ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW)
1517 | GPIOF_EXPORT;
1518 ret = devm_gpio_request_one(&client->dev, gpio->gpio, flags,
1519 "S5K6AA_STBY");
1520 if (ret < 0)
1521 return ret;
1522
1523 s5k6aa->gpio[STBY] = *gpio;
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001524 }
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001525
1526 gpio = &pdata->gpio_reset;
Laurent Pinchart31857e52013-05-02 08:29:43 -03001527 if (gpio_is_valid(gpio->gpio)) {
1528 flags = (gpio->level ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW)
1529 | GPIOF_EXPORT;
1530 ret = devm_gpio_request_one(&client->dev, gpio->gpio, flags,
1531 "S5K6AA_RST");
1532 if (ret < 0)
1533 return ret;
1534
1535 s5k6aa->gpio[RST] = *gpio;
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001536 }
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001537
1538 return 0;
1539}
1540
1541static int s5k6aa_probe(struct i2c_client *client,
1542 const struct i2c_device_id *id)
1543{
1544 const struct s5k6aa_platform_data *pdata = client->dev.platform_data;
1545 struct v4l2_subdev *sd;
1546 struct s5k6aa *s5k6aa;
1547 int i, ret;
1548
1549 if (pdata == NULL) {
1550 dev_err(&client->dev, "Platform data not specified\n");
1551 return -EINVAL;
1552 }
1553
1554 if (pdata->mclk_frequency == 0) {
1555 dev_err(&client->dev, "MCLK frequency not specified\n");
1556 return -EINVAL;
1557 }
1558
Sachin Kamatdc9c94c2012-07-26 02:23:32 -03001559 s5k6aa = devm_kzalloc(&client->dev, sizeof(*s5k6aa), GFP_KERNEL);
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001560 if (!s5k6aa)
1561 return -ENOMEM;
1562
1563 mutex_init(&s5k6aa->lock);
1564
1565 s5k6aa->mclk_frequency = pdata->mclk_frequency;
1566 s5k6aa->bus_type = pdata->bus_type;
1567 s5k6aa->mipi_lanes = pdata->nlanes;
1568 s5k6aa->s_power = pdata->set_power;
1569 s5k6aa->inv_hflip = pdata->horiz_flip;
1570 s5k6aa->inv_vflip = pdata->vert_flip;
1571
1572 sd = &s5k6aa->sd;
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001573 v4l2_i2c_subdev_init(sd, client, &s5k6aa_subdev_ops);
Sylwester Nawrocki14b702d2011-12-13 11:06:12 -03001574 strlcpy(sd->name, DRIVER_NAME, sizeof(sd->name));
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001575
1576 sd->internal_ops = &s5k6aa_subdev_internal_ops;
1577 sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
1578
1579 s5k6aa->pad.flags = MEDIA_PAD_FL_SOURCE;
Mauro Carvalho Chehab4ca72ef2015-12-10 17:25:41 -02001580 sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
Mauro Carvalho Chehabab22e772015-12-11 07:44:40 -02001581 ret = media_entity_pads_init(&sd->entity, 1, &s5k6aa->pad);
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001582 if (ret)
Sachin Kamatdc9c94c2012-07-26 02:23:32 -03001583 return ret;
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001584
1585 ret = s5k6aa_configure_gpios(s5k6aa, pdata);
1586 if (ret)
Laurent Pinchart31857e52013-05-02 08:29:43 -03001587 goto out_err;
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001588
1589 for (i = 0; i < S5K6AA_NUM_SUPPLIES; i++)
1590 s5k6aa->supplies[i].supply = s5k6aa_supply_names[i];
1591
Sachin Kamat97466d02013-01-08 02:48:24 -03001592 ret = devm_regulator_bulk_get(&client->dev, S5K6AA_NUM_SUPPLIES,
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001593 s5k6aa->supplies);
1594 if (ret) {
1595 dev_err(&client->dev, "Failed to get regulators\n");
Laurent Pinchart31857e52013-05-02 08:29:43 -03001596 goto out_err;
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001597 }
1598
1599 ret = s5k6aa_initialize_ctrls(s5k6aa);
1600 if (ret)
Laurent Pinchart31857e52013-05-02 08:29:43 -03001601 goto out_err;
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001602
1603 s5k6aa_presets_data_init(s5k6aa);
1604
1605 s5k6aa->ccd_rect.width = S5K6AA_WIN_WIDTH_MAX;
1606 s5k6aa->ccd_rect.height = S5K6AA_WIN_HEIGHT_MAX;
1607 s5k6aa->ccd_rect.left = 0;
1608 s5k6aa->ccd_rect.top = 0;
1609
1610 return 0;
1611
Laurent Pinchart31857e52013-05-02 08:29:43 -03001612out_err:
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001613 media_entity_cleanup(&s5k6aa->sd.entity);
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001614 return ret;
1615}
1616
1617static int s5k6aa_remove(struct i2c_client *client)
1618{
1619 struct v4l2_subdev *sd = i2c_get_clientdata(client);
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001620
1621 v4l2_device_unregister_subdev(sd);
1622 v4l2_ctrl_handler_free(sd->ctrl_handler);
1623 media_entity_cleanup(&sd->entity);
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001624
1625 return 0;
1626}
1627
1628static const struct i2c_device_id s5k6aa_id[] = {
1629 { DRIVER_NAME, 0 },
1630 { },
1631};
1632MODULE_DEVICE_TABLE(i2c, s5k6aa_id);
1633
1634
1635static struct i2c_driver s5k6aa_i2c_driver = {
1636 .driver = {
1637 .name = DRIVER_NAME
1638 },
1639 .probe = s5k6aa_probe,
1640 .remove = s5k6aa_remove,
1641 .id_table = s5k6aa_id,
1642};
1643
Axel Linc6e8d862012-02-12 06:56:32 -03001644module_i2c_driver(s5k6aa_i2c_driver);
Sylwester Nawrockibfa8dd32011-10-04 14:05:58 -03001645
1646MODULE_DESCRIPTION("Samsung S5K6AA(FX) SXGA camera driver");
1647MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
1648MODULE_LICENSE("GPL");