blob: b6b8c1f233dd8caa62caebf5b44c92a8480a9b37 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * SL811HS register declarations and HCD data structures
3 *
4 * Copyright (C) 2004 Psion Teklogix
5 * Copyright (C) 2004 David Brownell
6 * Copyright (C) 2001 Cypress Semiconductor Inc.
7 */
8
9/*
10 * SL811HS has transfer registers, and control registers. In host/master
11 * mode one set of registers is used; in peripheral/slave mode, another.
12 * - SL11H only has some "A" transfer registers from 0x00-0x04
13 * - SL811HS also has "B" registers from 0x08-0x0c
14 * - SL811S (or HS in slave mode) has four A+B sets, at 00, 10, 20, 30
15 */
16
17#define SL811_EP_A(base) ((base) + 0)
18#define SL811_EP_B(base) ((base) + 8)
19
20#define SL811_HOST_BUF 0x00
21#define SL811_PERIPH_EP0 0x00
22#define SL811_PERIPH_EP1 0x10
23#define SL811_PERIPH_EP2 0x20
24#define SL811_PERIPH_EP3 0x30
25
26
27/* TRANSFER REGISTERS: host and peripheral sides are similar
28 * except for the control models (master vs slave).
29 */
30#define SL11H_HOSTCTLREG 0
31# define SL11H_HCTLMASK_ARM 0x01
32# define SL11H_HCTLMASK_ENABLE 0x02
33# define SL11H_HCTLMASK_IN 0x00
34# define SL11H_HCTLMASK_OUT 0x04
35# define SL11H_HCTLMASK_ISOCH 0x10
36# define SL11H_HCTLMASK_AFTERSOF 0x20
37# define SL11H_HCTLMASK_TOGGLE 0x40
38# define SL11H_HCTLMASK_PREAMBLE 0x80
39#define SL11H_BUFADDRREG 1
40#define SL11H_BUFLNTHREG 2
41#define SL11H_PKTSTATREG 3 /* read */
42# define SL11H_STATMASK_ACK 0x01
43# define SL11H_STATMASK_ERROR 0x02
44# define SL11H_STATMASK_TMOUT 0x04
45# define SL11H_STATMASK_SEQ 0x08
46# define SL11H_STATMASK_SETUP 0x10
47# define SL11H_STATMASK_OVF 0x20
48# define SL11H_STATMASK_NAK 0x40
49# define SL11H_STATMASK_STALL 0x80
50#define SL11H_PIDEPREG 3 /* write */
51# define SL_SETUP 0xd0
52# define SL_IN 0x90
53# define SL_OUT 0x10
54# define SL_SOF 0x50
55# define SL_PREAMBLE 0xc0
56# define SL_NAK 0xa0
57# define SL_STALL 0xe0
58# define SL_DATA0 0x30
59# define SL_DATA1 0xb0
60#define SL11H_XFERCNTREG 4 /* read */
61#define SL11H_DEVADDRREG 4 /* write */
62
63
64/* CONTROL REGISTERS: host and peripheral are very different.
65 */
66#define SL11H_CTLREG1 5
67# define SL11H_CTL1MASK_SOF_ENA 0x01
68# define SL11H_CTL1MASK_FORCE 0x18
69# define SL11H_CTL1MASK_NORMAL 0x00
70# define SL11H_CTL1MASK_SE0 0x08 /* reset */
71# define SL11H_CTL1MASK_J 0x10
72# define SL11H_CTL1MASK_K 0x18 /* resume */
73# define SL11H_CTL1MASK_LSPD 0x20
74# define SL11H_CTL1MASK_SUSPEND 0x40
75#define SL11H_IRQ_ENABLE 6
76# define SL11H_INTMASK_DONE_A 0x01
77# define SL11H_INTMASK_DONE_B 0x02
78# define SL11H_INTMASK_SOFINTR 0x10
79# define SL11H_INTMASK_INSRMV 0x20 /* to/from SE0 */
80# define SL11H_INTMASK_RD 0x40
81# define SL11H_INTMASK_DP 0x80 /* only in INTSTATREG */
82#define SL11S_ADDRESS 7
83
84/* 0x08-0x0c are for the B buffer (not in SL11) */
85
86#define SL11H_IRQ_STATUS 0x0D /* write to ack */
87#define SL11H_HWREVREG 0x0E /* read */
88# define SL11H_HWRMASK_HWREV 0xF0
89#define SL11H_SOFLOWREG 0x0E /* write */
90#define SL11H_SOFTMRREG 0x0F /* read */
91
92/* a write to this register enables SL811HS features.
93 * HOST flag presumably overrides the chip input signal?
94 */
95#define SL811HS_CTLREG2 0x0F
96# define SL811HS_CTL2MASK_SOF_MASK 0x3F
97# define SL811HS_CTL2MASK_DSWAP 0x40
98# define SL811HS_CTL2MASK_HOST 0x80
99
100#define SL811HS_CTL2_INIT (SL811HS_CTL2MASK_HOST | 0x2e)
101
102
103/* DATA BUFFERS: registers from 0x10..0xff are for data buffers;
104 * that's 240 bytes, which we'll split evenly between A and B sides.
105 * Only ISO can use more than 64 bytes per packet.
106 * (The SL11S has 0x40..0xff for buffers.)
107 */
108#define H_MAXPACKET 120 /* bytes in A or B fifos */
109
110#define SL11H_DATA_START 0x10
111#define SL811HS_PACKET_BUF(is_a) ((is_a) \
112 ? SL11H_DATA_START \
113 : (SL11H_DATA_START + H_MAXPACKET))
114
115/*-------------------------------------------------------------------------*/
116
117#define LOG2_PERIODIC_SIZE 5 /* arbitrary; this matches OHCI */
118#define PERIODIC_SIZE (1 << LOG2_PERIODIC_SIZE)
119
120struct sl811 {
121 spinlock_t lock;
122 void __iomem *addr_reg;
123 void __iomem *data_reg;
124 struct sl811_platform_data *board;
125 struct proc_dir_entry *pde;
126
127 unsigned long stat_insrmv;
128 unsigned long stat_wake;
129 unsigned long stat_sof;
130 unsigned long stat_a;
131 unsigned long stat_b;
132 unsigned long stat_lost;
133 unsigned long stat_overrun;
134
135 /* sw model */
136 struct timer_list timer;
137 struct sl811h_ep *next_periodic;
138 struct sl811h_ep *next_async;
139
140 struct sl811h_ep *active_a;
141 unsigned long jiffies_a;
142 struct sl811h_ep *active_b;
143 unsigned long jiffies_b;
144
145 u32 port1;
146 u8 ctrl1, ctrl2, irq_enable;
147 u16 frame;
148
149 /* async schedule: control, bulk */
150 struct list_head async;
151
152 /* periodic schedule: interrupt, iso */
153 u16 load[PERIODIC_SIZE];
154 struct sl811h_ep *periodic[PERIODIC_SIZE];
155 unsigned periodic_count;
156};
157
158static inline struct sl811 *hcd_to_sl811(struct usb_hcd *hcd)
159{
160 return (struct sl811 *) (hcd->hcd_priv);
161}
162
163static inline struct usb_hcd *sl811_to_hcd(struct sl811 *sl811)
164{
165 return container_of((void *) sl811, struct usb_hcd, hcd_priv);
166}
167
168struct sl811h_ep {
169 struct usb_host_endpoint *hep;
170 struct usb_device *udev;
171
172 u8 defctrl;
173 u8 maxpacket;
174 u8 epnum;
175 u8 nextpid;
176
177 u16 error_count;
178 u16 nak_count;
179 u16 length; /* of current packet */
180
181 /* periodic schedule */
182 u16 period;
183 u16 branch;
184 u16 load;
185 struct sl811h_ep *next;
186
187 /* async schedule */
188 struct list_head schedule;
189};
190
191/*-------------------------------------------------------------------------*/
192
193/* These register utilities should work for the SL811S register API too
194 * NOTE: caller must hold sl811->lock.
195 */
196
197static inline u8 sl811_read(struct sl811 *sl811, int reg)
198{
199 writeb(reg, sl811->addr_reg);
200 return readb(sl811->data_reg);
201}
202
203static inline void sl811_write(struct sl811 *sl811, int reg, u8 val)
204{
205 writeb(reg, sl811->addr_reg);
206 writeb(val, sl811->data_reg);
207}
208
209static inline void
210sl811_write_buf(struct sl811 *sl811, int addr, const void *buf, size_t count)
211{
212 const u8 *data;
213 void __iomem *data_reg;
214
215 if (!count)
216 return;
217 writeb(addr, sl811->addr_reg);
218
219 data = buf;
220 data_reg = sl811->data_reg;
221 do {
222 writeb(*data++, data_reg);
223 } while (--count);
224}
225
226static inline void
227sl811_read_buf(struct sl811 *sl811, int addr, void *buf, size_t count)
228{
229 u8 *data;
230 void __iomem *data_reg;
231
232 if (!count)
233 return;
234 writeb(addr, sl811->addr_reg);
235
236 data = buf;
237 data_reg = sl811->data_reg;
238 do {
239 *data++ = readb(data_reg);
240 } while (--count);
241}
242
243/*-------------------------------------------------------------------------*/
244
245#ifdef DEBUG
246#define DBG(stuff...) printk(KERN_DEBUG "sl811: " stuff)
247#else
248#define DBG(stuff...) do{}while(0)
249#endif
250
251#ifdef VERBOSE
252# define VDBG DBG
253#else
254# define VDBG(stuff...) do{}while(0)
255#endif
256
257#ifdef PACKET_TRACE
258# define PACKET VDBG
259#else
260# define PACKET(stuff...) do{}while(0)
261#endif
262
263#define ERR(stuff...) printk(KERN_ERR "sl811: " stuff)
Arjan van de Venb6c63932008-07-25 01:45:52 -0700264#define WARNING(stuff...) printk(KERN_WARNING "sl811: " stuff)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700265#define INFO(stuff...) printk(KERN_INFO "sl811: " stuff)
266