Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 1 | /* |
| 2 | * Samsung's Exynos4412 based Trats 2 board device tree source |
| 3 | * |
| 4 | * Copyright (c) 2013 Samsung Electronics Co., Ltd. |
| 5 | * http://www.samsung.com |
| 6 | * |
| 7 | * Device tree source file for Samsung's Trats 2 board which is based on |
| 8 | * Samsung's Exynos4412 SoC. |
| 9 | * |
| 10 | * This program is free software; you can redistribute it and/or modify |
| 11 | * it under the terms of the GNU General Public License version 2 as |
| 12 | * published by the Free Software Foundation. |
| 13 | */ |
| 14 | |
| 15 | /dts-v1/; |
| 16 | #include "exynos4412.dtsi" |
Krzysztof Kozlowski | 7eec126 | 2014-09-24 01:22:49 +0900 | [diff] [blame] | 17 | #include <dt-bindings/gpio/gpio.h> |
Krzysztof Kozlowski | e861429 | 2015-02-04 07:43:44 +0900 | [diff] [blame] | 18 | #include <dt-bindings/interrupt-controller/irq.h> |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 19 | |
| 20 | / { |
| 21 | model = "Samsung Trats 2 based on Exynos4412"; |
Sachin Kamat | 8bdb31b | 2014-03-21 02:17:22 +0900 | [diff] [blame] | 22 | compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4"; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 23 | |
Jacek Anaszewski | 9f1eaef | 2013-08-06 02:49:44 +0900 | [diff] [blame] | 24 | aliases { |
Tomasz Stanislawski | 6af2ba9 | 2014-05-09 05:58:59 +0900 | [diff] [blame] | 25 | i2c9 = &i2c_ak8975; |
Beomho Seo | 85cb4e0 | 2014-05-22 07:56:53 +0900 | [diff] [blame] | 26 | i2c10 = &i2c_cm36651; |
Krzysztof Kozlowski | 7eec126 | 2014-09-24 01:22:49 +0900 | [diff] [blame] | 27 | i2c11 = &i2c_max77693; |
Krzysztof Kozlowski | e861429 | 2015-02-04 07:43:44 +0900 | [diff] [blame] | 28 | i2c12 = &i2c_max77693_fuel; |
Jacek Anaszewski | 9f1eaef | 2013-08-06 02:49:44 +0900 | [diff] [blame] | 29 | }; |
| 30 | |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 31 | memory { |
| 32 | reg = <0x40000000 0x40000000>; |
| 33 | }; |
| 34 | |
| 35 | chosen { |
| 36 | bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; |
| 37 | }; |
| 38 | |
| 39 | firmware@0204F000 { |
| 40 | compatible = "samsung,secure-firmware"; |
| 41 | reg = <0x0204F000 0x1000>; |
| 42 | }; |
| 43 | |
| 44 | fixed-rate-clocks { |
| 45 | xxti { |
| 46 | compatible = "samsung,clock-xxti", "fixed-clock"; |
| 47 | clock-frequency = <0>; |
| 48 | }; |
| 49 | |
| 50 | xusbxti { |
| 51 | compatible = "samsung,clock-xusbxti", "fixed-clock"; |
| 52 | clock-frequency = <24000000>; |
| 53 | }; |
| 54 | }; |
| 55 | |
| 56 | regulators { |
| 57 | compatible = "simple-bus"; |
| 58 | #address-cells = <1>; |
| 59 | #size-cells = <0>; |
| 60 | |
Sylwester Nawrocki | b4fec64 | 2013-08-06 02:49:44 +0900 | [diff] [blame] | 61 | cam_io_reg: voltage-regulator-1 { |
| 62 | compatible = "regulator-fixed"; |
| 63 | regulator-name = "CAM_SENSOR_A"; |
| 64 | regulator-min-microvolt = <2800000>; |
| 65 | regulator-max-microvolt = <2800000>; |
| 66 | gpio = <&gpm0 2 0>; |
| 67 | enable-active-high; |
| 68 | }; |
| 69 | |
Andrzej Hajda | 420ae84 | 2014-03-28 12:52:45 +0100 | [diff] [blame] | 70 | lcd_vdd3_reg: voltage-regulator-2 { |
| 71 | compatible = "regulator-fixed"; |
| 72 | regulator-name = "LCD_VDD_2.2V"; |
| 73 | regulator-min-microvolt = <2200000>; |
| 74 | regulator-max-microvolt = <2200000>; |
| 75 | gpio = <&gpc0 1 0>; |
| 76 | enable-active-high; |
| 77 | }; |
| 78 | |
Sylwester Nawrocki | 4cb3786 | 2014-05-09 06:01:40 +0900 | [diff] [blame] | 79 | cam_af_reg: voltage-regulator-3 { |
| 80 | compatible = "regulator-fixed"; |
| 81 | regulator-name = "CAM_AF"; |
| 82 | regulator-min-microvolt = <2800000>; |
| 83 | regulator-max-microvolt = <2800000>; |
| 84 | gpio = <&gpm0 4 0>; |
| 85 | enable-active-high; |
| 86 | }; |
| 87 | |
Beomho Seo | 85cb4e0 | 2014-05-22 07:56:53 +0900 | [diff] [blame] | 88 | ps_als_reg: voltage-regulator-5 { |
| 89 | compatible = "regulator-fixed"; |
| 90 | regulator-name = "LED_A_3.0V"; |
| 91 | regulator-min-microvolt = <3000000>; |
| 92 | regulator-max-microvolt = <3000000>; |
| 93 | gpio = <&gpj0 5 0>; |
| 94 | enable-active-high; |
| 95 | }; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 96 | }; |
| 97 | |
| 98 | gpio-keys { |
| 99 | compatible = "gpio-keys"; |
| 100 | |
| 101 | key-down { |
Beomho Seo | 172ff6c | 2014-05-22 07:57:39 +0900 | [diff] [blame] | 102 | gpios = <&gpx3 3 1>; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 103 | linux,code = <114>; |
| 104 | label = "volume down"; |
| 105 | debounce-interval = <10>; |
| 106 | }; |
| 107 | |
| 108 | key-up { |
Beomho Seo | 172ff6c | 2014-05-22 07:57:39 +0900 | [diff] [blame] | 109 | gpios = <&gpx2 2 1>; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 110 | linux,code = <115>; |
| 111 | label = "volume up"; |
| 112 | debounce-interval = <10>; |
| 113 | }; |
| 114 | |
| 115 | key-power { |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 116 | gpios = <&gpx2 7 1>; |
| 117 | linux,code = <116>; |
| 118 | label = "power"; |
| 119 | debounce-interval = <10>; |
| 120 | gpio-key,wakeup; |
| 121 | }; |
Beomho Seo | 172ff6c | 2014-05-22 07:57:39 +0900 | [diff] [blame] | 122 | |
| 123 | key-ok { |
| 124 | gpios = <&gpx0 1 1>; |
| 125 | linux,code = <139>; |
| 126 | label = "ok"; |
| 127 | debounce-inteval = <10>; |
| 128 | gpio-key,wakeup; |
| 129 | }; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 130 | }; |
| 131 | |
Chanwoo Choi | 4f42378 | 2014-03-18 06:25:59 +0900 | [diff] [blame] | 132 | adc: adc@126C0000 { |
| 133 | vdd-supply = <&ldo3_reg>; |
| 134 | status = "okay"; |
| 135 | }; |
| 136 | |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 137 | i2c@13890000 { |
| 138 | samsung,i2c-sda-delay = <100>; |
| 139 | samsung,i2c-slave-addr = <0x10>; |
| 140 | samsung,i2c-max-bus-freq = <400000>; |
| 141 | pinctrl-0 = <&i2c3_bus>; |
| 142 | pinctrl-names = "default"; |
| 143 | status = "okay"; |
| 144 | |
| 145 | mms114-touchscreen@48 { |
| 146 | compatible = "melfas,mms114"; |
| 147 | reg = <0x48>; |
| 148 | interrupt-parent = <&gpm2>; |
| 149 | interrupts = <3 2>; |
| 150 | x-size = <720>; |
| 151 | y-size = <1280>; |
| 152 | avdd-supply = <&ldo23_reg>; |
| 153 | vdd-supply = <&ldo24_reg>; |
| 154 | }; |
| 155 | }; |
| 156 | |
Sylwester Nawrocki | 4cb3786 | 2014-05-09 06:01:40 +0900 | [diff] [blame] | 157 | i2c_0: i2c@13860000 { |
| 158 | samsung,i2c-sda-delay = <100>; |
| 159 | samsung,i2c-slave-addr = <0x10>; |
| 160 | samsung,i2c-max-bus-freq = <400000>; |
| 161 | pinctrl-0 = <&i2c0_bus>; |
| 162 | pinctrl-names = "default"; |
| 163 | status = "okay"; |
| 164 | |
| 165 | s5c73m3@3c { |
| 166 | compatible = "samsung,s5c73m3"; |
| 167 | reg = <0x3c>; |
| 168 | standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */ |
| 169 | xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */ |
| 170 | vdd-int-supply = <&buck9_reg>; |
| 171 | vddio-cis-supply = <&ldo9_reg>; |
| 172 | vdda-supply = <&ldo17_reg>; |
| 173 | vddio-host-supply = <&ldo18_reg>; |
| 174 | vdd-af-supply = <&cam_af_reg>; |
| 175 | vdd-reg-supply = <&cam_io_reg>; |
| 176 | clock-frequency = <24000000>; |
| 177 | /* CAM_A_CLKOUT */ |
| 178 | clocks = <&camera 0>; |
| 179 | clock-names = "cis_extclk"; |
| 180 | port { |
| 181 | s5c73m3_ep: endpoint { |
| 182 | remote-endpoint = <&csis0_ep>; |
| 183 | data-lanes = <1 2 3 4>; |
| 184 | }; |
| 185 | }; |
| 186 | }; |
| 187 | }; |
| 188 | |
Inha Song | 440e5ae | 2015-02-04 07:51:38 +0900 | [diff] [blame] | 189 | i2c@138A0000 { |
| 190 | samsung,i2c-sda-delay = <100>; |
| 191 | samsung,i2c-slave-addr = <0x10>; |
| 192 | samsung,i2c-max-bus-freq = <100000>; |
| 193 | pinctrl-0 = <&i2c4_bus>; |
| 194 | pinctrl-names = "default"; |
| 195 | status = "okay"; |
| 196 | |
| 197 | wm1811: wm1811@1a { |
| 198 | compatible = "wlf,wm1811"; |
| 199 | reg = <0x1a>; |
| 200 | clocks = <&pmu_system_controller 0>; |
| 201 | clock-names = "MCLK1"; |
| 202 | DCVDD-supply = <&ldo3_reg>; |
| 203 | DBVDD1-supply = <&ldo3_reg>; |
| 204 | wlf,ldo1ena = <&gpj0 4 0>; |
| 205 | }; |
| 206 | }; |
| 207 | |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 208 | i2c@138D0000 { |
| 209 | samsung,i2c-sda-delay = <100>; |
| 210 | samsung,i2c-slave-addr = <0x10>; |
| 211 | samsung,i2c-max-bus-freq = <100000>; |
| 212 | pinctrl-0 = <&i2c7_bus>; |
| 213 | pinctrl-names = "default"; |
| 214 | status = "okay"; |
| 215 | |
| 216 | max77686_pmic@09 { |
| 217 | compatible = "maxim,max77686"; |
| 218 | interrupt-parent = <&gpx0>; |
| 219 | interrupts = <7 0>; |
| 220 | reg = <0x09>; |
Tomasz Figa | ada12c4 | 2013-12-12 17:07:21 +0100 | [diff] [blame] | 221 | #clock-cells = <1>; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 222 | |
| 223 | voltage-regulators { |
| 224 | ldo1_reg: ldo1 { |
| 225 | regulator-compatible = "LDO1"; |
| 226 | regulator-name = "VALIVE_1.0V_AP"; |
| 227 | regulator-min-microvolt = <1000000>; |
| 228 | regulator-max-microvolt = <1000000>; |
| 229 | regulator-always-on; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 230 | }; |
| 231 | |
| 232 | ldo2_reg: ldo2 { |
| 233 | regulator-compatible = "LDO2"; |
| 234 | regulator-name = "VM1M2_1.2V_AP"; |
| 235 | regulator-min-microvolt = <1200000>; |
| 236 | regulator-max-microvolt = <1200000>; |
| 237 | regulator-always-on; |
Krzysztof Kozlowski | 4a235f6 | 2015-02-04 07:43:49 +0900 | [diff] [blame] | 238 | regulator-state-mem { |
| 239 | regulator-on-in-suspend; |
| 240 | }; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 241 | }; |
| 242 | |
| 243 | ldo3_reg: ldo3 { |
| 244 | regulator-compatible = "LDO3"; |
| 245 | regulator-name = "VCC_1.8V_AP"; |
| 246 | regulator-min-microvolt = <1800000>; |
| 247 | regulator-max-microvolt = <1800000>; |
| 248 | regulator-always-on; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 249 | }; |
| 250 | |
| 251 | ldo4_reg: ldo4 { |
| 252 | regulator-compatible = "LDO4"; |
| 253 | regulator-name = "VCC_2.8V_AP"; |
| 254 | regulator-min-microvolt = <2800000>; |
| 255 | regulator-max-microvolt = <2800000>; |
| 256 | regulator-always-on; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 257 | }; |
| 258 | |
| 259 | ldo5_reg: ldo5 { |
| 260 | regulator-compatible = "LDO5"; |
| 261 | regulator-name = "VCC_1.8V_IO"; |
| 262 | regulator-min-microvolt = <1800000>; |
| 263 | regulator-max-microvolt = <1800000>; |
| 264 | regulator-always-on; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 265 | }; |
| 266 | |
| 267 | ldo6_reg: ldo6 { |
| 268 | regulator-compatible = "LDO6"; |
| 269 | regulator-name = "VMPLL_1.0V_AP"; |
| 270 | regulator-min-microvolt = <1000000>; |
| 271 | regulator-max-microvolt = <1000000>; |
| 272 | regulator-always-on; |
Krzysztof Kozlowski | 4a235f6 | 2015-02-04 07:43:49 +0900 | [diff] [blame] | 273 | regulator-state-mem { |
| 274 | regulator-on-in-suspend; |
| 275 | }; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 276 | }; |
| 277 | |
| 278 | ldo7_reg: ldo7 { |
| 279 | regulator-compatible = "LDO7"; |
| 280 | regulator-name = "VPLL_1.0V_AP"; |
| 281 | regulator-min-microvolt = <1000000>; |
| 282 | regulator-max-microvolt = <1000000>; |
| 283 | regulator-always-on; |
Krzysztof Kozlowski | 4a235f6 | 2015-02-04 07:43:49 +0900 | [diff] [blame] | 284 | regulator-state-mem { |
| 285 | regulator-on-in-suspend; |
| 286 | }; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 287 | }; |
| 288 | |
| 289 | ldo8_reg: ldo8 { |
| 290 | regulator-compatible = "LDO8"; |
| 291 | regulator-name = "VMIPI_1.0V"; |
| 292 | regulator-min-microvolt = <1000000>; |
| 293 | regulator-max-microvolt = <1000000>; |
Krzysztof Kozlowski | 4a235f6 | 2015-02-04 07:43:49 +0900 | [diff] [blame] | 294 | regulator-state-mem { |
| 295 | regulator-off-in-suspend; |
| 296 | }; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 297 | }; |
| 298 | |
| 299 | ldo9_reg: ldo9 { |
| 300 | regulator-compatible = "LDO9"; |
| 301 | regulator-name = "CAM_ISP_MIPI_1.2V"; |
| 302 | regulator-min-microvolt = <1200000>; |
| 303 | regulator-max-microvolt = <1200000>; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 304 | }; |
| 305 | |
| 306 | ldo10_reg: ldo10 { |
| 307 | regulator-compatible = "LDO10"; |
| 308 | regulator-name = "VMIPI_1.8V"; |
| 309 | regulator-min-microvolt = <1800000>; |
| 310 | regulator-max-microvolt = <1800000>; |
Krzysztof Kozlowski | 4a235f6 | 2015-02-04 07:43:49 +0900 | [diff] [blame] | 311 | regulator-state-mem { |
| 312 | regulator-off-in-suspend; |
| 313 | }; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 314 | }; |
| 315 | |
| 316 | ldo11_reg: ldo11 { |
| 317 | regulator-compatible = "LDO11"; |
| 318 | regulator-name = "VABB1_1.95V"; |
| 319 | regulator-min-microvolt = <1950000>; |
| 320 | regulator-max-microvolt = <1950000>; |
| 321 | regulator-always-on; |
Krzysztof Kozlowski | 4a235f6 | 2015-02-04 07:43:49 +0900 | [diff] [blame] | 322 | regulator-state-mem { |
| 323 | regulator-off-in-suspend; |
| 324 | }; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 325 | }; |
| 326 | |
| 327 | ldo12_reg: ldo12 { |
| 328 | regulator-compatible = "LDO12"; |
| 329 | regulator-name = "VUOTG_3.0V"; |
| 330 | regulator-min-microvolt = <3000000>; |
| 331 | regulator-max-microvolt = <3000000>; |
Krzysztof Kozlowski | 4a235f6 | 2015-02-04 07:43:49 +0900 | [diff] [blame] | 332 | regulator-state-mem { |
| 333 | regulator-off-in-suspend; |
| 334 | }; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 335 | }; |
| 336 | |
| 337 | ldo13_reg: ldo13 { |
| 338 | regulator-compatible = "LDO13"; |
| 339 | regulator-name = "NFC_AVDD_1.8V"; |
| 340 | regulator-min-microvolt = <1800000>; |
| 341 | regulator-max-microvolt = <1800000>; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 342 | }; |
| 343 | |
| 344 | ldo14_reg: ldo14 { |
| 345 | regulator-compatible = "LDO14"; |
| 346 | regulator-name = "VABB2_1.95V"; |
| 347 | regulator-min-microvolt = <1950000>; |
| 348 | regulator-max-microvolt = <1950000>; |
| 349 | regulator-always-on; |
Krzysztof Kozlowski | 4a235f6 | 2015-02-04 07:43:49 +0900 | [diff] [blame] | 350 | regulator-state-mem { |
| 351 | regulator-off-in-suspend; |
| 352 | }; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 353 | }; |
| 354 | |
| 355 | ldo15_reg: ldo15 { |
| 356 | regulator-compatible = "LDO15"; |
| 357 | regulator-name = "VHSIC_1.0V"; |
| 358 | regulator-min-microvolt = <1000000>; |
| 359 | regulator-max-microvolt = <1000000>; |
Krzysztof Kozlowski | 4a235f6 | 2015-02-04 07:43:49 +0900 | [diff] [blame] | 360 | regulator-state-mem { |
| 361 | regulator-on-in-suspend; |
| 362 | }; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 363 | }; |
| 364 | |
| 365 | ldo16_reg: ldo16 { |
| 366 | regulator-compatible = "LDO16"; |
| 367 | regulator-name = "VHSIC_1.8V"; |
| 368 | regulator-min-microvolt = <1800000>; |
| 369 | regulator-max-microvolt = <1800000>; |
Krzysztof Kozlowski | 4a235f6 | 2015-02-04 07:43:49 +0900 | [diff] [blame] | 370 | regulator-state-mem { |
| 371 | regulator-on-in-suspend; |
| 372 | }; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 373 | }; |
| 374 | |
| 375 | ldo17_reg: ldo17 { |
| 376 | regulator-compatible = "LDO17"; |
| 377 | regulator-name = "CAM_SENSOR_CORE_1.2V"; |
| 378 | regulator-min-microvolt = <1200000>; |
| 379 | regulator-max-microvolt = <1200000>; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 380 | }; |
| 381 | |
| 382 | ldo18_reg: ldo18 { |
| 383 | regulator-compatible = "LDO18"; |
| 384 | regulator-name = "CAM_ISP_SEN_IO_1.8V"; |
| 385 | regulator-min-microvolt = <1800000>; |
| 386 | regulator-max-microvolt = <1800000>; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 387 | }; |
| 388 | |
| 389 | ldo19_reg: ldo19 { |
| 390 | regulator-compatible = "LDO19"; |
| 391 | regulator-name = "VT_CAM_1.8V"; |
| 392 | regulator-min-microvolt = <1800000>; |
| 393 | regulator-max-microvolt = <1800000>; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 394 | }; |
| 395 | |
| 396 | ldo20_reg: ldo20 { |
| 397 | regulator-compatible = "LDO20"; |
| 398 | regulator-name = "VDDQ_PRE_1.8V"; |
| 399 | regulator-min-microvolt = <1800000>; |
| 400 | regulator-max-microvolt = <1800000>; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 401 | }; |
| 402 | |
| 403 | ldo21_reg: ldo21 { |
| 404 | regulator-compatible = "LDO21"; |
| 405 | regulator-name = "VTF_2.8V"; |
| 406 | regulator-min-microvolt = <2800000>; |
| 407 | regulator-max-microvolt = <2800000>; |
Krzysztof Kozlowski | faf9a3e | 2015-02-04 07:43:54 +0900 | [diff] [blame] | 408 | maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 409 | }; |
| 410 | |
| 411 | ldo22_reg: ldo22 { |
| 412 | regulator-compatible = "LDO22"; |
| 413 | regulator-name = "VMEM_VDD_2.8V"; |
| 414 | regulator-min-microvolt = <2800000>; |
| 415 | regulator-max-microvolt = <2800000>; |
Krzysztof Kozlowski | faf9a3e | 2015-02-04 07:43:54 +0900 | [diff] [blame] | 416 | maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 417 | }; |
| 418 | |
| 419 | ldo23_reg: ldo23 { |
| 420 | regulator-compatible = "LDO23"; |
| 421 | regulator-name = "TSP_AVDD_3.3V"; |
| 422 | regulator-min-microvolt = <3300000>; |
| 423 | regulator-max-microvolt = <3300000>; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 424 | }; |
| 425 | |
| 426 | ldo24_reg: ldo24 { |
| 427 | regulator-compatible = "LDO24"; |
| 428 | regulator-name = "TSP_VDD_1.8V"; |
| 429 | regulator-min-microvolt = <1800000>; |
| 430 | regulator-max-microvolt = <1800000>; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 431 | }; |
| 432 | |
| 433 | ldo25_reg: ldo25 { |
| 434 | regulator-compatible = "LDO25"; |
| 435 | regulator-name = "LCD_VCC_3.3V"; |
| 436 | regulator-min-microvolt = <2800000>; |
| 437 | regulator-max-microvolt = <2800000>; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 438 | }; |
| 439 | |
| 440 | ldo26_reg: ldo26 { |
| 441 | regulator-compatible = "LDO26"; |
| 442 | regulator-name = "MOTOR_VCC_3.0V"; |
| 443 | regulator-min-microvolt = <3000000>; |
| 444 | regulator-max-microvolt = <3000000>; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 445 | }; |
| 446 | |
| 447 | buck1_reg: buck1 { |
| 448 | regulator-compatible = "BUCK1"; |
| 449 | regulator-name = "vdd_mif"; |
| 450 | regulator-min-microvolt = <850000>; |
| 451 | regulator-max-microvolt = <1100000>; |
| 452 | regulator-always-on; |
| 453 | regulator-boot-on; |
Krzysztof Kozlowski | 4a235f6 | 2015-02-04 07:43:49 +0900 | [diff] [blame] | 454 | regulator-state-mem { |
| 455 | regulator-off-in-suspend; |
| 456 | }; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 457 | }; |
| 458 | |
| 459 | buck2_reg: buck2 { |
| 460 | regulator-compatible = "BUCK2"; |
| 461 | regulator-name = "vdd_arm"; |
| 462 | regulator-min-microvolt = <850000>; |
| 463 | regulator-max-microvolt = <1500000>; |
| 464 | regulator-always-on; |
| 465 | regulator-boot-on; |
Krzysztof Kozlowski | 4a235f6 | 2015-02-04 07:43:49 +0900 | [diff] [blame] | 466 | regulator-state-mem { |
| 467 | regulator-on-in-suspend; |
| 468 | }; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 469 | }; |
| 470 | |
| 471 | buck3_reg: buck3 { |
| 472 | regulator-compatible = "BUCK3"; |
| 473 | regulator-name = "vdd_int"; |
| 474 | regulator-min-microvolt = <850000>; |
| 475 | regulator-max-microvolt = <1150000>; |
| 476 | regulator-always-on; |
| 477 | regulator-boot-on; |
Krzysztof Kozlowski | 4a235f6 | 2015-02-04 07:43:49 +0900 | [diff] [blame] | 478 | regulator-state-mem { |
| 479 | regulator-off-in-suspend; |
| 480 | }; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 481 | }; |
| 482 | |
| 483 | buck4_reg: buck4 { |
| 484 | regulator-compatible = "BUCK4"; |
| 485 | regulator-name = "vdd_g3d"; |
| 486 | regulator-min-microvolt = <850000>; |
| 487 | regulator-max-microvolt = <1150000>; |
| 488 | regulator-boot-on; |
Krzysztof Kozlowski | 4a235f6 | 2015-02-04 07:43:49 +0900 | [diff] [blame] | 489 | regulator-state-mem { |
| 490 | regulator-off-in-suspend; |
| 491 | }; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 492 | }; |
| 493 | |
| 494 | buck5_reg: buck5 { |
| 495 | regulator-compatible = "BUCK5"; |
| 496 | regulator-name = "VMEM_1.2V_AP"; |
| 497 | regulator-min-microvolt = <1200000>; |
| 498 | regulator-max-microvolt = <1200000>; |
| 499 | regulator-always-on; |
| 500 | }; |
| 501 | |
| 502 | buck6_reg: buck6 { |
| 503 | regulator-compatible = "BUCK6"; |
| 504 | regulator-name = "VCC_SUB_1.35V"; |
| 505 | regulator-min-microvolt = <1350000>; |
| 506 | regulator-max-microvolt = <1350000>; |
| 507 | regulator-always-on; |
| 508 | }; |
| 509 | |
| 510 | buck7_reg: buck7 { |
| 511 | regulator-compatible = "BUCK7"; |
| 512 | regulator-name = "VCC_SUB_2.0V"; |
| 513 | regulator-min-microvolt = <2000000>; |
| 514 | regulator-max-microvolt = <2000000>; |
| 515 | regulator-always-on; |
| 516 | }; |
| 517 | |
| 518 | buck8_reg: buck8 { |
| 519 | regulator-compatible = "BUCK8"; |
| 520 | regulator-name = "VMEM_VDDF_3.0V"; |
| 521 | regulator-min-microvolt = <2850000>; |
| 522 | regulator-max-microvolt = <2850000>; |
Krzysztof Kozlowski | faf9a3e | 2015-02-04 07:43:54 +0900 | [diff] [blame] | 523 | maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 524 | }; |
| 525 | |
| 526 | buck9_reg: buck9 { |
| 527 | regulator-compatible = "BUCK9"; |
| 528 | regulator-name = "CAM_ISP_CORE_1.2V"; |
| 529 | regulator-min-microvolt = <1000000>; |
| 530 | regulator-max-microvolt = <1200000>; |
Krzysztof Kozlowski | faf9a3e | 2015-02-04 07:43:54 +0900 | [diff] [blame] | 531 | maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 532 | }; |
| 533 | }; |
| 534 | }; |
| 535 | }; |
| 536 | |
Krzysztof Kozlowski | 7eec126 | 2014-09-24 01:22:49 +0900 | [diff] [blame] | 537 | i2c_max77693: i2c-gpio-1 { |
| 538 | compatible = "i2c-gpio"; |
| 539 | gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>; |
| 540 | i2c-gpio,delay-us = <2>; |
| 541 | #address-cells = <1>; |
| 542 | #size-cells = <0>; |
| 543 | status = "okay"; |
| 544 | |
| 545 | max77693@66 { |
| 546 | compatible = "maxim,max77693"; |
| 547 | interrupt-parent = <&gpx1>; |
| 548 | interrupts = <5 2>; |
| 549 | reg = <0x66>; |
| 550 | |
| 551 | regulators { |
| 552 | esafeout1_reg: ESAFEOUT1@1 { |
| 553 | regulator-name = "ESAFEOUT1"; |
| 554 | }; |
| 555 | esafeout2_reg: ESAFEOUT2@2 { |
| 556 | regulator-name = "ESAFEOUT2"; |
| 557 | }; |
| 558 | charger_reg: CHARGER@0 { |
| 559 | regulator-name = "CHARGER"; |
| 560 | regulator-min-microamp = <60000>; |
| 561 | regulator-max-microamp = <2580000>; |
| 562 | }; |
| 563 | }; |
Jaewon Kim | d9c6808 | 2014-11-22 23:19:22 +0900 | [diff] [blame] | 564 | |
| 565 | max77693_haptic { |
| 566 | compatible = "maxim,max77693-haptic"; |
| 567 | haptic-supply = <&ldo26_reg>; |
| 568 | pwms = <&pwm 0 38022 0>; |
| 569 | }; |
Krzysztof Kozlowski | 043ef14 | 2015-02-04 07:47:39 +0900 | [diff] [blame] | 570 | |
| 571 | charger { |
| 572 | compatible = "maxim,max77693-charger"; |
| 573 | |
| 574 | maxim,constant-microvolt = <4350000>; |
| 575 | maxim,min-system-microvolt = <3600000>; |
| 576 | maxim,thermal-regulation-celsius = <100>; |
| 577 | maxim,battery-overcurrent-microamp = <3500000>; |
| 578 | maxim,charge-input-threshold-microvolt = <4300000>; |
| 579 | }; |
Krzysztof Kozlowski | 7eec126 | 2014-09-24 01:22:49 +0900 | [diff] [blame] | 580 | }; |
| 581 | }; |
| 582 | |
Krzysztof Kozlowski | e861429 | 2015-02-04 07:43:44 +0900 | [diff] [blame] | 583 | i2c_max77693_fuel: i2c-gpio-3 { |
| 584 | compatible = "i2c-gpio"; |
| 585 | gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>; |
| 586 | i2c-gpio,delay-us = <2>; |
| 587 | #address-cells = <1>; |
| 588 | #size-cells = <0>; |
| 589 | status = "okay"; |
| 590 | |
| 591 | max77693-fuel-gauge@36 { |
| 592 | compatible = "maxim,max17047"; |
| 593 | interrupt-parent = <&gpx2>; |
| 594 | interrupts = <3 IRQ_TYPE_EDGE_FALLING>; |
| 595 | reg = <0x36>; |
| 596 | }; |
| 597 | }; |
| 598 | |
Tomasz Figa | ca7c11f | 2013-12-21 07:38:19 +0900 | [diff] [blame] | 599 | mmc@12550000 { |
| 600 | num-slots = <1>; |
Tomasz Figa | ca7c11f | 2013-12-21 07:38:19 +0900 | [diff] [blame] | 601 | broken-cd; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 602 | non-removable; |
Tomasz Figa | ca7c11f | 2013-12-21 07:38:19 +0900 | [diff] [blame] | 603 | card-detect-delay = <200>; |
Krzysztof Kozlowski | faf9a3e | 2015-02-04 07:43:54 +0900 | [diff] [blame] | 604 | vmmc-supply = <&ldo22_reg>; |
Tomasz Figa | ca7c11f | 2013-12-21 07:38:19 +0900 | [diff] [blame] | 605 | clock-frequency = <400000000>; |
| 606 | samsung,dw-mshc-ciu-div = <0>; |
| 607 | samsung,dw-mshc-sdr-timing = <2 3>; |
| 608 | samsung,dw-mshc-ddr-timing = <1 2>; |
| 609 | pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; |
| 610 | pinctrl-names = "default"; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 611 | status = "okay"; |
Jaehoon Chung | aaa25a5 | 2014-08-18 11:55:32 -0500 | [diff] [blame] | 612 | bus-width = <8>; |
| 613 | cap-mmc-highspeed; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 614 | }; |
| 615 | |
Krzysztof Kozlowski | a427d15 | 2014-11-07 08:22:49 +0900 | [diff] [blame] | 616 | sdhci@12530000 { |
| 617 | bus-width = <4>; |
| 618 | cd-gpios = <&gpx3 4 0>; |
| 619 | cd-inverted; |
| 620 | pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; |
| 621 | pinctrl-names = "default"; |
| 622 | vmmc-supply = <&ldo21_reg>; |
| 623 | status = "okay"; |
| 624 | }; |
| 625 | |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 626 | serial@13800000 { |
| 627 | status = "okay"; |
| 628 | }; |
| 629 | |
| 630 | serial@13810000 { |
| 631 | status = "okay"; |
| 632 | }; |
| 633 | |
| 634 | serial@13820000 { |
| 635 | status = "okay"; |
| 636 | }; |
| 637 | |
| 638 | serial@13830000 { |
| 639 | status = "okay"; |
| 640 | }; |
Jacek Anaszewski | 9f1eaef | 2013-08-06 02:49:44 +0900 | [diff] [blame] | 641 | |
Lukasz Majewski | 432047f | 2014-11-22 22:58:09 +0900 | [diff] [blame] | 642 | tmu@100C0000 { |
| 643 | vtmu-supply = <&ldo10_reg>; |
| 644 | status = "okay"; |
| 645 | }; |
| 646 | |
Jacek Anaszewski | 9f1eaef | 2013-08-06 02:49:44 +0900 | [diff] [blame] | 647 | i2c_ak8975: i2c-gpio-0 { |
| 648 | compatible = "i2c-gpio"; |
| 649 | gpios = <&gpy2 4 0>, <&gpy2 5 0>; |
| 650 | i2c-gpio,delay-us = <2>; |
| 651 | #address-cells = <1>; |
| 652 | #size-cells = <0>; |
| 653 | status = "okay"; |
| 654 | |
| 655 | ak8975@0c { |
Beomho Seo | 30cc798 | 2014-05-20 01:12:50 +0900 | [diff] [blame] | 656 | compatible = "asahi-kasei,ak8975"; |
Jacek Anaszewski | 9f1eaef | 2013-08-06 02:49:44 +0900 | [diff] [blame] | 657 | reg = <0x0c>; |
| 658 | gpios = <&gpj0 7 0>; |
| 659 | }; |
| 660 | }; |
Sylwester Nawrocki | b4fec64 | 2013-08-06 02:49:44 +0900 | [diff] [blame] | 661 | |
Beomho Seo | 85cb4e0 | 2014-05-22 07:56:53 +0900 | [diff] [blame] | 662 | i2c_cm36651: i2c-gpio-2 { |
| 663 | compatible = "i2c-gpio"; |
| 664 | gpios = <&gpf0 0 1>, <&gpf0 1 1>; |
| 665 | i2c-gpio,delay-us = <2>; |
| 666 | #address-cells = <1>; |
| 667 | #size-cells = <0>; |
| 668 | |
| 669 | cm36651@18 { |
| 670 | compatible = "capella,cm36651"; |
| 671 | reg = <0x18>; |
| 672 | interrupt-parent = <&gpx0>; |
| 673 | interrupts = <2 2>; |
| 674 | vled-supply = <&ps_als_reg>; |
| 675 | }; |
| 676 | }; |
| 677 | |
Andrzej Hajda | 201f126 | 2013-08-06 02:49:45 +0900 | [diff] [blame] | 678 | spi_1: spi@13930000 { |
| 679 | pinctrl-names = "default"; |
| 680 | pinctrl-0 = <&spi1_bus>; |
Naveen Krishna Chatradhi | e138d43 | 2014-07-16 17:19:10 +0200 | [diff] [blame] | 681 | cs-gpios = <&gpb 5 0>; |
Andrzej Hajda | 201f126 | 2013-08-06 02:49:45 +0900 | [diff] [blame] | 682 | status = "okay"; |
| 683 | |
| 684 | s5c73m3_spi: s5c73m3 { |
| 685 | compatible = "samsung,s5c73m3"; |
| 686 | spi-max-frequency = <50000000>; |
| 687 | reg = <0>; |
| 688 | controller-data { |
Andrzej Hajda | 201f126 | 2013-08-06 02:49:45 +0900 | [diff] [blame] | 689 | samsung,spi-feedback-delay = <2>; |
| 690 | }; |
| 691 | }; |
| 692 | }; |
| 693 | |
Jaewon Kim | 249358c | 2014-11-22 23:19:18 +0900 | [diff] [blame] | 694 | pwm: pwm@139D0000 { |
| 695 | pinctrl-0 = <&pwm0_out>; |
| 696 | pinctrl-names = "default"; |
| 697 | samsung,pwm-outputs = <0>; |
| 698 | status = "okay"; |
| 699 | }; |
| 700 | |
Andrzej Hajda | 420ae84 | 2014-03-28 12:52:45 +0100 | [diff] [blame] | 701 | dsi_0: dsi@11C80000 { |
| 702 | vddcore-supply = <&ldo8_reg>; |
| 703 | vddio-supply = <&ldo10_reg>; |
| 704 | samsung,pll-clock-frequency = <24000000>; |
| 705 | status = "okay"; |
| 706 | |
| 707 | ports { |
| 708 | #address-cells = <1>; |
| 709 | #size-cells = <0>; |
| 710 | |
| 711 | port@1 { |
| 712 | reg = <1>; |
| 713 | |
| 714 | dsi_out: endpoint { |
| 715 | remote-endpoint = <&dsi_in>; |
| 716 | samsung,burst-clock-frequency = <500000000>; |
| 717 | samsung,esc-clock-frequency = <20000000>; |
| 718 | }; |
| 719 | }; |
| 720 | }; |
| 721 | |
| 722 | panel@0 { |
| 723 | compatible = "samsung,s6e8aa0"; |
| 724 | reg = <0>; |
| 725 | vdd3-supply = <&lcd_vdd3_reg>; |
| 726 | vci-supply = <&ldo25_reg>; |
| 727 | reset-gpios = <&gpy4 5 0>; |
| 728 | power-on-delay= <50>; |
| 729 | reset-delay = <100>; |
| 730 | init-delay = <100>; |
| 731 | flip-horizontal; |
| 732 | flip-vertical; |
| 733 | panel-width-mm = <58>; |
| 734 | panel-height-mm = <103>; |
| 735 | |
| 736 | display-timings { |
| 737 | timing-0 { |
| 738 | clock-frequency = <0>; |
| 739 | hactive = <720>; |
| 740 | vactive = <1280>; |
| 741 | hfront-porch = <5>; |
| 742 | hback-porch = <5>; |
| 743 | hsync-len = <5>; |
| 744 | vfront-porch = <13>; |
| 745 | vback-porch = <1>; |
| 746 | vsync-len = <2>; |
| 747 | }; |
| 748 | }; |
| 749 | |
| 750 | port { |
| 751 | dsi_in: endpoint { |
| 752 | remote-endpoint = <&dsi_out>; |
| 753 | }; |
| 754 | }; |
| 755 | }; |
| 756 | }; |
| 757 | |
Andrzej Hajda | bbab1e3f | 2014-03-28 12:52:47 +0100 | [diff] [blame] | 758 | fimd@11c00000 { |
| 759 | status = "okay"; |
| 760 | }; |
| 761 | |
Sylwester Nawrocki | 4cb3786 | 2014-05-09 06:01:40 +0900 | [diff] [blame] | 762 | camera: camera { |
| 763 | pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; |
Sylwester Nawrocki | b4fec64 | 2013-08-06 02:49:44 +0900 | [diff] [blame] | 764 | pinctrl-names = "default"; |
| 765 | status = "okay"; |
Sylwester Nawrocki | 0357a44 | 2014-11-22 23:13:03 +0900 | [diff] [blame] | 766 | assigned-clocks = <&clock CLK_MOUT_CAM0>, |
| 767 | <&clock CLK_MOUT_CAM1>; |
Sylwester Nawrocki | cfe3b89 | 2015-02-04 07:49:49 +0900 | [diff] [blame] | 768 | assigned-clock-parents = <&clock CLK_XUSBXTI>, |
| 769 | <&clock CLK_XUSBXTI>; |
Sylwester Nawrocki | b4fec64 | 2013-08-06 02:49:44 +0900 | [diff] [blame] | 770 | |
| 771 | fimc_0: fimc@11800000 { |
| 772 | status = "okay"; |
Sylwester Nawrocki | 0357a44 | 2014-11-22 23:13:03 +0900 | [diff] [blame] | 773 | assigned-clocks = <&clock CLK_MOUT_FIMC0>, |
| 774 | <&clock CLK_SCLK_FIMC0>; |
| 775 | assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; |
| 776 | assigned-clock-rates = <0>, <176000000>; |
Sylwester Nawrocki | b4fec64 | 2013-08-06 02:49:44 +0900 | [diff] [blame] | 777 | }; |
| 778 | |
| 779 | fimc_1: fimc@11810000 { |
| 780 | status = "okay"; |
Sylwester Nawrocki | 0357a44 | 2014-11-22 23:13:03 +0900 | [diff] [blame] | 781 | assigned-clocks = <&clock CLK_MOUT_FIMC1>, |
| 782 | <&clock CLK_SCLK_FIMC1>; |
| 783 | assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; |
| 784 | assigned-clock-rates = <0>, <176000000>; |
Sylwester Nawrocki | b4fec64 | 2013-08-06 02:49:44 +0900 | [diff] [blame] | 785 | }; |
| 786 | |
| 787 | fimc_2: fimc@11820000 { |
| 788 | status = "okay"; |
Sylwester Nawrocki | 0357a44 | 2014-11-22 23:13:03 +0900 | [diff] [blame] | 789 | assigned-clocks = <&clock CLK_MOUT_FIMC2>, |
| 790 | <&clock CLK_SCLK_FIMC2>; |
| 791 | assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; |
| 792 | assigned-clock-rates = <0>, <176000000>; |
Sylwester Nawrocki | b4fec64 | 2013-08-06 02:49:44 +0900 | [diff] [blame] | 793 | }; |
| 794 | |
| 795 | fimc_3: fimc@11830000 { |
| 796 | status = "okay"; |
Sylwester Nawrocki | 0357a44 | 2014-11-22 23:13:03 +0900 | [diff] [blame] | 797 | assigned-clocks = <&clock CLK_MOUT_FIMC3>, |
| 798 | <&clock CLK_SCLK_FIMC3>; |
| 799 | assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; |
| 800 | assigned-clock-rates = <0>, <176000000>; |
Sylwester Nawrocki | b4fec64 | 2013-08-06 02:49:44 +0900 | [diff] [blame] | 801 | }; |
| 802 | |
Sylwester Nawrocki | 4cb3786 | 2014-05-09 06:01:40 +0900 | [diff] [blame] | 803 | csis_0: csis@11880000 { |
| 804 | status = "okay"; |
| 805 | vddcore-supply = <&ldo8_reg>; |
| 806 | vddio-supply = <&ldo10_reg>; |
Sylwester Nawrocki | 0357a44 | 2014-11-22 23:13:03 +0900 | [diff] [blame] | 807 | assigned-clocks = <&clock CLK_MOUT_CSIS0>, |
| 808 | <&clock CLK_SCLK_CSIS0>; |
| 809 | assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; |
| 810 | assigned-clock-rates = <0>, <176000000>; |
Sylwester Nawrocki | 4cb3786 | 2014-05-09 06:01:40 +0900 | [diff] [blame] | 811 | |
| 812 | /* Camera C (3) MIPI CSI-2 (CSIS0) */ |
| 813 | port@3 { |
| 814 | reg = <3>; |
| 815 | csis0_ep: endpoint { |
| 816 | remote-endpoint = <&s5c73m3_ep>; |
| 817 | data-lanes = <1 2 3 4>; |
| 818 | samsung,csis-hs-settle = <12>; |
| 819 | }; |
| 820 | }; |
| 821 | }; |
| 822 | |
Sylwester Nawrocki | b4fec64 | 2013-08-06 02:49:44 +0900 | [diff] [blame] | 823 | csis_1: csis@11890000 { |
Sylwester Nawrocki | 0357a44 | 2014-11-22 23:13:03 +0900 | [diff] [blame] | 824 | status = "okay"; |
Sylwester Nawrocki | b4fec64 | 2013-08-06 02:49:44 +0900 | [diff] [blame] | 825 | vddcore-supply = <&ldo8_reg>; |
| 826 | vddio-supply = <&ldo10_reg>; |
Sylwester Nawrocki | 0357a44 | 2014-11-22 23:13:03 +0900 | [diff] [blame] | 827 | assigned-clocks = <&clock CLK_MOUT_CSIS1>, |
| 828 | <&clock CLK_SCLK_CSIS1>; |
| 829 | assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; |
| 830 | assigned-clock-rates = <0>, <176000000>; |
Sylwester Nawrocki | b4fec64 | 2013-08-06 02:49:44 +0900 | [diff] [blame] | 831 | |
| 832 | /* Camera D (4) MIPI CSI-2 (CSIS1) */ |
| 833 | port@4 { |
| 834 | reg = <4>; |
| 835 | csis1_ep: endpoint { |
| 836 | remote-endpoint = <&is_s5k6a3_ep>; |
| 837 | data-lanes = <1>; |
| 838 | samsung,csis-hs-settle = <18>; |
| 839 | samsung,csis-wclk; |
| 840 | }; |
| 841 | }; |
| 842 | }; |
| 843 | |
| 844 | fimc_lite_0: fimc-lite@12390000 { |
| 845 | status = "okay"; |
| 846 | }; |
| 847 | |
| 848 | fimc_lite_1: fimc-lite@123A0000 { |
| 849 | status = "okay"; |
| 850 | }; |
| 851 | |
| 852 | fimc-is@12000000 { |
| 853 | pinctrl-0 = <&fimc_is_uart>; |
| 854 | pinctrl-names = "default"; |
| 855 | status = "okay"; |
| 856 | |
| 857 | i2c1_isp: i2c-isp@12140000 { |
| 858 | pinctrl-0 = <&fimc_is_i2c1>; |
| 859 | pinctrl-names = "default"; |
| 860 | |
| 861 | s5k6a3@10 { |
| 862 | compatible = "samsung,s5k6a3"; |
| 863 | reg = <0x10>; |
| 864 | svdda-supply = <&cam_io_reg>; |
| 865 | svddio-supply = <&ldo19_reg>; |
Sylwester Nawrocki | ee5eda6 | 2014-05-09 06:00:35 +0900 | [diff] [blame] | 866 | afvdd-supply = <&ldo19_reg>; |
Sylwester Nawrocki | b4fec64 | 2013-08-06 02:49:44 +0900 | [diff] [blame] | 867 | clock-frequency = <24000000>; |
| 868 | /* CAM_B_CLKOUT */ |
Sylwester Nawrocki | ee5eda6 | 2014-05-09 06:00:35 +0900 | [diff] [blame] | 869 | clocks = <&camera 1>; |
| 870 | clock-names = "extclk"; |
Sylwester Nawrocki | b4fec64 | 2013-08-06 02:49:44 +0900 | [diff] [blame] | 871 | samsung,camclk-out = <1>; |
| 872 | gpios = <&gpm1 6 0>; |
| 873 | |
| 874 | port { |
| 875 | is_s5k6a3_ep: endpoint { |
| 876 | remote-endpoint = <&csis1_ep>; |
| 877 | data-lanes = <1>; |
| 878 | }; |
| 879 | }; |
| 880 | }; |
| 881 | }; |
| 882 | }; |
| 883 | }; |
Chanwoo Choi | 4f42378 | 2014-03-18 06:25:59 +0900 | [diff] [blame] | 884 | |
Inha Song | 440e5ae | 2015-02-04 07:51:38 +0900 | [diff] [blame] | 885 | i2s0: i2s@03830000 { |
| 886 | pinctrl-0 = <&i2s0_bus>; |
| 887 | pinctrl-names = "default"; |
| 888 | status = "okay"; |
| 889 | }; |
| 890 | |
| 891 | sound { |
| 892 | compatible = "samsung,trats2-audio"; |
| 893 | samsung,i2s-controller = <&i2s0>; |
| 894 | samsung,model = "Trats2"; |
| 895 | samsung,audio-codec = <&wm1811>; |
| 896 | samsung,audio-routing = |
| 897 | "SPK", "SPKOUTLN", |
| 898 | "SPK", "SPKOUTLP", |
| 899 | "SPK", "SPKOUTRN", |
| 900 | "SPK", "SPKOUTRP"; |
| 901 | }; |
| 902 | |
Chanho Park | 3c8977f | 2014-05-23 03:30:21 +0900 | [diff] [blame] | 903 | exynos-usbphy@125B0000 { |
| 904 | status = "okay"; |
| 905 | }; |
| 906 | |
| 907 | hsotg@12480000 { |
| 908 | vusb_d-supply = <&ldo15_reg>; |
| 909 | vusb_a-supply = <&ldo12_reg>; |
Marek Szyprowski | 32f144f | 2015-01-24 13:12:03 +0900 | [diff] [blame] | 910 | dr_mode = "peripheral"; |
Chanho Park | 3c8977f | 2014-05-23 03:30:21 +0900 | [diff] [blame] | 911 | status = "okay"; |
| 912 | }; |
| 913 | |
Chanwoo Choi | 4f42378 | 2014-03-18 06:25:59 +0900 | [diff] [blame] | 914 | thermistor-ap@0 { |
| 915 | compatible = "ntc,ncp15wb473"; |
| 916 | pullup-uv = <1800000>; /* VCC_1.8V_AP */ |
| 917 | pullup-ohm = <100000>; /* 100K */ |
| 918 | pulldown-ohm = <100000>; /* 100K */ |
| 919 | io-channels = <&adc 1>; /* AP temperature */ |
| 920 | }; |
| 921 | |
| 922 | thermistor-battery@1 { |
| 923 | compatible = "ntc,ncp15wb473"; |
| 924 | pullup-uv = <1800000>; /* VCC_1.8V_AP */ |
| 925 | pullup-ohm = <100000>; /* 100K */ |
| 926 | pulldown-ohm = <100000>; /* 100K */ |
| 927 | io-channels = <&adc 2>; /* Battery temperature */ |
| 928 | }; |
Tomasz Figa | 15dfdfa | 2013-07-24 13:41:45 +0900 | [diff] [blame] | 929 | }; |
Tomasz Figa | 09918a9 | 2014-09-24 01:20:03 +0900 | [diff] [blame] | 930 | |
Inha Song | 440e5ae | 2015-02-04 07:51:38 +0900 | [diff] [blame] | 931 | &pmu_system_controller { |
| 932 | assigned-clocks = <&pmu_system_controller 0>; |
| 933 | assigned-clock-parents = <&clock CLK_XUSBXTI>; |
| 934 | }; |
| 935 | |
Chanwoo Choi | 7808cae | 2015-02-04 08:11:52 +0900 | [diff] [blame^] | 936 | &ppmu_dmc0 { |
| 937 | status = "okay"; |
| 938 | |
| 939 | events { |
| 940 | ppmu_dmc0_3: ppmu-event3-dmc0 { |
| 941 | event-name = "ppmu-event3-dmc0"; |
| 942 | }; |
| 943 | }; |
| 944 | }; |
| 945 | |
| 946 | &ppmu_dmc1 { |
| 947 | status = "okay"; |
| 948 | |
| 949 | events { |
| 950 | ppmu_dmc1_3: ppmu-event3-dmc1 { |
| 951 | event-name = "ppmu-event3-dmc1"; |
| 952 | }; |
| 953 | }; |
| 954 | }; |
| 955 | |
| 956 | &ppmu_leftbus { |
| 957 | status = "okay"; |
| 958 | |
| 959 | events { |
| 960 | ppmu_leftbus_3: ppmu-event3-leftbus { |
| 961 | event-name = "ppmu-event3-leftbus"; |
| 962 | }; |
| 963 | }; |
| 964 | }; |
| 965 | |
| 966 | &ppmu_rightbus { |
| 967 | status = "okay"; |
| 968 | |
| 969 | events { |
| 970 | ppmu_rightbus_3: ppmu-event3-rightbus { |
| 971 | event-name = "ppmu-event3-rightbus"; |
| 972 | }; |
| 973 | }; |
| 974 | }; |
| 975 | |
Tomasz Figa | 09918a9 | 2014-09-24 01:20:03 +0900 | [diff] [blame] | 976 | &pinctrl_0 { |
| 977 | pinctrl-names = "default"; |
| 978 | pinctrl-0 = <&sleep0>; |
| 979 | |
| 980 | sleep0: sleep-states { |
| 981 | PIN_SLP(gpa0-0, INPUT, NONE); |
| 982 | PIN_SLP(gpa0-1, OUT0, NONE); |
| 983 | PIN_SLP(gpa0-2, INPUT, NONE); |
| 984 | PIN_SLP(gpa0-3, INPUT, UP); |
| 985 | PIN_SLP(gpa0-4, INPUT, NONE); |
| 986 | PIN_SLP(gpa0-5, INPUT, DOWN); |
| 987 | PIN_SLP(gpa0-6, INPUT, DOWN); |
| 988 | PIN_SLP(gpa0-7, INPUT, UP); |
| 989 | |
| 990 | PIN_SLP(gpa1-0, INPUT, DOWN); |
| 991 | PIN_SLP(gpa1-1, INPUT, DOWN); |
| 992 | PIN_SLP(gpa1-2, INPUT, DOWN); |
| 993 | PIN_SLP(gpa1-3, INPUT, DOWN); |
| 994 | PIN_SLP(gpa1-4, INPUT, DOWN); |
| 995 | PIN_SLP(gpa1-5, INPUT, DOWN); |
| 996 | |
| 997 | PIN_SLP(gpb-0, INPUT, NONE); |
| 998 | PIN_SLP(gpb-1, INPUT, NONE); |
| 999 | PIN_SLP(gpb-2, INPUT, NONE); |
| 1000 | PIN_SLP(gpb-3, INPUT, NONE); |
| 1001 | PIN_SLP(gpb-4, INPUT, DOWN); |
| 1002 | PIN_SLP(gpb-5, INPUT, UP); |
| 1003 | PIN_SLP(gpb-6, INPUT, DOWN); |
| 1004 | PIN_SLP(gpb-7, INPUT, DOWN); |
| 1005 | |
| 1006 | PIN_SLP(gpc0-0, INPUT, DOWN); |
| 1007 | PIN_SLP(gpc0-1, INPUT, DOWN); |
| 1008 | PIN_SLP(gpc0-2, INPUT, DOWN); |
| 1009 | PIN_SLP(gpc0-3, INPUT, DOWN); |
| 1010 | PIN_SLP(gpc0-4, INPUT, DOWN); |
| 1011 | |
| 1012 | PIN_SLP(gpc1-0, INPUT, NONE); |
| 1013 | PIN_SLP(gpc1-1, PREV, NONE); |
| 1014 | PIN_SLP(gpc1-2, INPUT, NONE); |
| 1015 | PIN_SLP(gpc1-3, INPUT, NONE); |
| 1016 | PIN_SLP(gpc1-4, INPUT, NONE); |
| 1017 | |
| 1018 | PIN_SLP(gpd0-0, INPUT, DOWN); |
| 1019 | PIN_SLP(gpd0-1, INPUT, DOWN); |
| 1020 | PIN_SLP(gpd0-2, INPUT, NONE); |
| 1021 | PIN_SLP(gpd0-3, INPUT, NONE); |
| 1022 | |
| 1023 | PIN_SLP(gpd1-0, INPUT, DOWN); |
| 1024 | PIN_SLP(gpd1-1, INPUT, DOWN); |
| 1025 | PIN_SLP(gpd1-2, INPUT, NONE); |
| 1026 | PIN_SLP(gpd1-3, INPUT, NONE); |
| 1027 | |
| 1028 | PIN_SLP(gpf0-0, INPUT, NONE); |
| 1029 | PIN_SLP(gpf0-1, INPUT, NONE); |
| 1030 | PIN_SLP(gpf0-2, INPUT, DOWN); |
| 1031 | PIN_SLP(gpf0-3, INPUT, DOWN); |
| 1032 | PIN_SLP(gpf0-4, INPUT, NONE); |
| 1033 | PIN_SLP(gpf0-5, INPUT, DOWN); |
| 1034 | PIN_SLP(gpf0-6, INPUT, NONE); |
| 1035 | PIN_SLP(gpf0-7, INPUT, DOWN); |
| 1036 | |
| 1037 | PIN_SLP(gpf1-0, INPUT, DOWN); |
| 1038 | PIN_SLP(gpf1-1, INPUT, DOWN); |
| 1039 | PIN_SLP(gpf1-2, INPUT, DOWN); |
| 1040 | PIN_SLP(gpf1-3, INPUT, DOWN); |
| 1041 | PIN_SLP(gpf1-4, INPUT, NONE); |
| 1042 | PIN_SLP(gpf1-5, INPUT, NONE); |
| 1043 | PIN_SLP(gpf1-6, INPUT, DOWN); |
| 1044 | PIN_SLP(gpf1-7, PREV, NONE); |
| 1045 | |
| 1046 | PIN_SLP(gpf2-0, PREV, NONE); |
| 1047 | PIN_SLP(gpf2-1, INPUT, DOWN); |
| 1048 | PIN_SLP(gpf2-2, INPUT, DOWN); |
| 1049 | PIN_SLP(gpf2-3, INPUT, DOWN); |
| 1050 | PIN_SLP(gpf2-4, INPUT, DOWN); |
| 1051 | PIN_SLP(gpf2-5, INPUT, DOWN); |
| 1052 | PIN_SLP(gpf2-6, INPUT, NONE); |
| 1053 | PIN_SLP(gpf2-7, INPUT, NONE); |
| 1054 | |
| 1055 | PIN_SLP(gpf3-0, INPUT, NONE); |
| 1056 | PIN_SLP(gpf3-1, PREV, NONE); |
| 1057 | PIN_SLP(gpf3-2, PREV, NONE); |
| 1058 | PIN_SLP(gpf3-3, PREV, NONE); |
| 1059 | PIN_SLP(gpf3-4, OUT1, NONE); |
| 1060 | PIN_SLP(gpf3-5, INPUT, DOWN); |
| 1061 | |
| 1062 | PIN_SLP(gpj0-0, PREV, NONE); |
| 1063 | PIN_SLP(gpj0-1, PREV, NONE); |
| 1064 | PIN_SLP(gpj0-2, PREV, NONE); |
| 1065 | PIN_SLP(gpj0-3, INPUT, DOWN); |
| 1066 | PIN_SLP(gpj0-4, PREV, NONE); |
| 1067 | PIN_SLP(gpj0-5, PREV, NONE); |
| 1068 | PIN_SLP(gpj0-6, INPUT, DOWN); |
| 1069 | PIN_SLP(gpj0-7, INPUT, DOWN); |
| 1070 | |
| 1071 | PIN_SLP(gpj1-0, INPUT, DOWN); |
| 1072 | PIN_SLP(gpj1-1, PREV, NONE); |
| 1073 | PIN_SLP(gpj1-2, PREV, NONE); |
| 1074 | PIN_SLP(gpj1-3, INPUT, DOWN); |
| 1075 | PIN_SLP(gpj1-4, INPUT, DOWN); |
| 1076 | }; |
| 1077 | }; |
| 1078 | |
| 1079 | &pinctrl_1 { |
| 1080 | pinctrl-names = "default"; |
| 1081 | pinctrl-0 = <&sleep1>; |
| 1082 | |
| 1083 | sleep1: sleep-states { |
| 1084 | PIN_SLP(gpk0-0, PREV, NONE); |
| 1085 | PIN_SLP(gpk0-1, PREV, NONE); |
| 1086 | PIN_SLP(gpk0-2, OUT0, NONE); |
| 1087 | PIN_SLP(gpk0-3, PREV, NONE); |
| 1088 | PIN_SLP(gpk0-4, PREV, NONE); |
| 1089 | PIN_SLP(gpk0-5, PREV, NONE); |
| 1090 | PIN_SLP(gpk0-6, PREV, NONE); |
| 1091 | |
| 1092 | PIN_SLP(gpk1-0, INPUT, DOWN); |
| 1093 | PIN_SLP(gpk1-1, INPUT, DOWN); |
| 1094 | PIN_SLP(gpk1-2, INPUT, DOWN); |
| 1095 | PIN_SLP(gpk1-3, PREV, NONE); |
| 1096 | PIN_SLP(gpk1-4, PREV, NONE); |
| 1097 | PIN_SLP(gpk1-5, PREV, NONE); |
| 1098 | PIN_SLP(gpk1-6, PREV, NONE); |
| 1099 | |
| 1100 | PIN_SLP(gpk2-0, INPUT, DOWN); |
| 1101 | PIN_SLP(gpk2-1, INPUT, DOWN); |
| 1102 | PIN_SLP(gpk2-2, INPUT, DOWN); |
| 1103 | PIN_SLP(gpk2-3, INPUT, DOWN); |
| 1104 | PIN_SLP(gpk2-4, INPUT, DOWN); |
| 1105 | PIN_SLP(gpk2-5, INPUT, DOWN); |
| 1106 | PIN_SLP(gpk2-6, INPUT, DOWN); |
| 1107 | |
| 1108 | PIN_SLP(gpk3-0, OUT0, NONE); |
| 1109 | PIN_SLP(gpk3-1, INPUT, NONE); |
| 1110 | PIN_SLP(gpk3-2, INPUT, DOWN); |
| 1111 | PIN_SLP(gpk3-3, INPUT, NONE); |
| 1112 | PIN_SLP(gpk3-4, INPUT, NONE); |
| 1113 | PIN_SLP(gpk3-5, INPUT, NONE); |
| 1114 | PIN_SLP(gpk3-6, INPUT, NONE); |
| 1115 | |
| 1116 | PIN_SLP(gpl0-0, INPUT, DOWN); |
| 1117 | PIN_SLP(gpl0-1, INPUT, DOWN); |
| 1118 | PIN_SLP(gpl0-2, INPUT, DOWN); |
| 1119 | PIN_SLP(gpl0-3, INPUT, DOWN); |
| 1120 | PIN_SLP(gpl0-4, PREV, NONE); |
| 1121 | PIN_SLP(gpl0-6, PREV, NONE); |
| 1122 | |
| 1123 | PIN_SLP(gpl1-0, INPUT, DOWN); |
| 1124 | PIN_SLP(gpl1-1, INPUT, DOWN); |
| 1125 | PIN_SLP(gpl2-0, INPUT, DOWN); |
| 1126 | PIN_SLP(gpl2-1, INPUT, DOWN); |
| 1127 | PIN_SLP(gpl2-2, INPUT, DOWN); |
| 1128 | PIN_SLP(gpl2-3, INPUT, DOWN); |
| 1129 | PIN_SLP(gpl2-4, INPUT, DOWN); |
| 1130 | PIN_SLP(gpl2-5, INPUT, DOWN); |
| 1131 | PIN_SLP(gpl2-6, PREV, NONE); |
| 1132 | PIN_SLP(gpl2-7, INPUT, DOWN); |
| 1133 | |
| 1134 | PIN_SLP(gpm0-0, INPUT, DOWN); |
| 1135 | PIN_SLP(gpm0-1, INPUT, DOWN); |
| 1136 | PIN_SLP(gpm0-2, INPUT, DOWN); |
| 1137 | PIN_SLP(gpm0-3, INPUT, DOWN); |
| 1138 | PIN_SLP(gpm0-4, INPUT, DOWN); |
| 1139 | PIN_SLP(gpm0-5, INPUT, DOWN); |
| 1140 | PIN_SLP(gpm0-6, INPUT, DOWN); |
| 1141 | PIN_SLP(gpm0-7, INPUT, DOWN); |
| 1142 | |
| 1143 | PIN_SLP(gpm1-0, INPUT, DOWN); |
| 1144 | PIN_SLP(gpm1-1, INPUT, DOWN); |
| 1145 | PIN_SLP(gpm1-2, INPUT, NONE); |
| 1146 | PIN_SLP(gpm1-3, INPUT, NONE); |
| 1147 | PIN_SLP(gpm1-4, INPUT, NONE); |
| 1148 | PIN_SLP(gpm1-5, INPUT, NONE); |
| 1149 | PIN_SLP(gpm1-6, INPUT, DOWN); |
| 1150 | |
| 1151 | PIN_SLP(gpm2-0, INPUT, NONE); |
| 1152 | PIN_SLP(gpm2-1, INPUT, NONE); |
| 1153 | PIN_SLP(gpm2-2, INPUT, DOWN); |
| 1154 | PIN_SLP(gpm2-3, INPUT, DOWN); |
| 1155 | PIN_SLP(gpm2-4, INPUT, DOWN); |
| 1156 | |
| 1157 | PIN_SLP(gpm3-0, PREV, NONE); |
| 1158 | PIN_SLP(gpm3-1, PREV, NONE); |
| 1159 | PIN_SLP(gpm3-2, PREV, NONE); |
| 1160 | PIN_SLP(gpm3-3, OUT1, NONE); |
| 1161 | PIN_SLP(gpm3-4, INPUT, DOWN); |
| 1162 | PIN_SLP(gpm3-5, INPUT, DOWN); |
| 1163 | PIN_SLP(gpm3-6, INPUT, DOWN); |
| 1164 | PIN_SLP(gpm3-7, INPUT, DOWN); |
| 1165 | |
| 1166 | PIN_SLP(gpm4-0, INPUT, DOWN); |
| 1167 | PIN_SLP(gpm4-1, INPUT, DOWN); |
| 1168 | PIN_SLP(gpm4-2, INPUT, DOWN); |
| 1169 | PIN_SLP(gpm4-3, INPUT, DOWN); |
| 1170 | PIN_SLP(gpm4-4, INPUT, DOWN); |
| 1171 | PIN_SLP(gpm4-5, INPUT, DOWN); |
| 1172 | PIN_SLP(gpm4-6, INPUT, DOWN); |
| 1173 | PIN_SLP(gpm4-7, INPUT, DOWN); |
| 1174 | |
| 1175 | PIN_SLP(gpy0-0, INPUT, DOWN); |
| 1176 | PIN_SLP(gpy0-1, INPUT, DOWN); |
| 1177 | PIN_SLP(gpy0-2, INPUT, DOWN); |
| 1178 | PIN_SLP(gpy0-3, INPUT, DOWN); |
| 1179 | PIN_SLP(gpy0-4, INPUT, DOWN); |
| 1180 | PIN_SLP(gpy0-5, INPUT, DOWN); |
| 1181 | |
| 1182 | PIN_SLP(gpy1-0, INPUT, DOWN); |
| 1183 | PIN_SLP(gpy1-1, INPUT, DOWN); |
| 1184 | PIN_SLP(gpy1-2, INPUT, DOWN); |
| 1185 | PIN_SLP(gpy1-3, INPUT, DOWN); |
| 1186 | |
| 1187 | PIN_SLP(gpy2-0, PREV, NONE); |
| 1188 | PIN_SLP(gpy2-1, INPUT, DOWN); |
| 1189 | PIN_SLP(gpy2-2, INPUT, NONE); |
| 1190 | PIN_SLP(gpy2-3, INPUT, NONE); |
| 1191 | PIN_SLP(gpy2-4, INPUT, NONE); |
| 1192 | PIN_SLP(gpy2-5, INPUT, NONE); |
| 1193 | |
| 1194 | PIN_SLP(gpy3-0, INPUT, DOWN); |
| 1195 | PIN_SLP(gpy3-1, INPUT, DOWN); |
| 1196 | PIN_SLP(gpy3-2, INPUT, DOWN); |
| 1197 | PIN_SLP(gpy3-3, INPUT, DOWN); |
| 1198 | PIN_SLP(gpy3-4, INPUT, DOWN); |
| 1199 | PIN_SLP(gpy3-5, INPUT, DOWN); |
| 1200 | PIN_SLP(gpy3-6, INPUT, DOWN); |
| 1201 | PIN_SLP(gpy3-7, INPUT, DOWN); |
| 1202 | |
| 1203 | PIN_SLP(gpy4-0, INPUT, DOWN); |
| 1204 | PIN_SLP(gpy4-1, INPUT, DOWN); |
| 1205 | PIN_SLP(gpy4-2, INPUT, DOWN); |
| 1206 | PIN_SLP(gpy4-3, INPUT, DOWN); |
| 1207 | PIN_SLP(gpy4-4, INPUT, DOWN); |
| 1208 | PIN_SLP(gpy4-5, INPUT, DOWN); |
| 1209 | PIN_SLP(gpy4-6, INPUT, DOWN); |
| 1210 | PIN_SLP(gpy4-7, INPUT, DOWN); |
| 1211 | |
| 1212 | PIN_SLP(gpy5-0, INPUT, DOWN); |
| 1213 | PIN_SLP(gpy5-1, INPUT, DOWN); |
| 1214 | PIN_SLP(gpy5-2, INPUT, DOWN); |
| 1215 | PIN_SLP(gpy5-3, INPUT, DOWN); |
| 1216 | PIN_SLP(gpy5-4, INPUT, DOWN); |
| 1217 | PIN_SLP(gpy5-5, INPUT, DOWN); |
| 1218 | PIN_SLP(gpy5-6, INPUT, DOWN); |
| 1219 | PIN_SLP(gpy5-7, INPUT, DOWN); |
| 1220 | |
| 1221 | PIN_SLP(gpy6-0, INPUT, DOWN); |
| 1222 | PIN_SLP(gpy6-1, INPUT, DOWN); |
| 1223 | PIN_SLP(gpy6-2, INPUT, DOWN); |
| 1224 | PIN_SLP(gpy6-3, INPUT, DOWN); |
| 1225 | PIN_SLP(gpy6-4, INPUT, DOWN); |
| 1226 | PIN_SLP(gpy6-5, INPUT, DOWN); |
| 1227 | PIN_SLP(gpy6-6, INPUT, DOWN); |
| 1228 | PIN_SLP(gpy6-7, INPUT, DOWN); |
| 1229 | }; |
| 1230 | }; |
| 1231 | |
| 1232 | &pinctrl_2 { |
| 1233 | pinctrl-names = "default"; |
| 1234 | pinctrl-0 = <&sleep2>; |
| 1235 | |
| 1236 | sleep2: sleep-states { |
| 1237 | PIN_SLP(gpz-0, INPUT, DOWN); |
| 1238 | PIN_SLP(gpz-1, INPUT, DOWN); |
| 1239 | PIN_SLP(gpz-2, INPUT, DOWN); |
| 1240 | PIN_SLP(gpz-3, INPUT, DOWN); |
| 1241 | PIN_SLP(gpz-4, INPUT, DOWN); |
| 1242 | PIN_SLP(gpz-5, INPUT, DOWN); |
| 1243 | PIN_SLP(gpz-6, INPUT, DOWN); |
| 1244 | }; |
| 1245 | }; |
| 1246 | |
| 1247 | &pinctrl_3 { |
| 1248 | pinctrl-names = "default"; |
| 1249 | pinctrl-0 = <&sleep3>; |
| 1250 | |
| 1251 | sleep3: sleep-states { |
| 1252 | PIN_SLP(gpv0-0, INPUT, DOWN); |
| 1253 | PIN_SLP(gpv0-1, INPUT, DOWN); |
| 1254 | PIN_SLP(gpv0-2, INPUT, DOWN); |
| 1255 | PIN_SLP(gpv0-3, INPUT, DOWN); |
| 1256 | PIN_SLP(gpv0-4, INPUT, DOWN); |
| 1257 | PIN_SLP(gpv0-5, INPUT, DOWN); |
| 1258 | PIN_SLP(gpv0-6, INPUT, DOWN); |
| 1259 | PIN_SLP(gpv0-7, INPUT, DOWN); |
| 1260 | |
| 1261 | PIN_SLP(gpv1-0, INPUT, DOWN); |
| 1262 | PIN_SLP(gpv1-1, INPUT, DOWN); |
| 1263 | PIN_SLP(gpv1-2, INPUT, DOWN); |
| 1264 | PIN_SLP(gpv1-3, INPUT, DOWN); |
| 1265 | PIN_SLP(gpv1-4, INPUT, DOWN); |
| 1266 | PIN_SLP(gpv1-5, INPUT, DOWN); |
| 1267 | PIN_SLP(gpv1-6, INPUT, DOWN); |
| 1268 | PIN_SLP(gpv1-7, INPUT, DOWN); |
| 1269 | |
| 1270 | PIN_SLP(gpv2-0, INPUT, DOWN); |
| 1271 | PIN_SLP(gpv2-1, INPUT, DOWN); |
| 1272 | PIN_SLP(gpv2-2, INPUT, DOWN); |
| 1273 | PIN_SLP(gpv2-3, INPUT, DOWN); |
| 1274 | PIN_SLP(gpv2-4, INPUT, DOWN); |
| 1275 | PIN_SLP(gpv2-5, INPUT, DOWN); |
| 1276 | PIN_SLP(gpv2-6, INPUT, DOWN); |
| 1277 | PIN_SLP(gpv2-7, INPUT, DOWN); |
| 1278 | |
| 1279 | PIN_SLP(gpv3-0, INPUT, DOWN); |
| 1280 | PIN_SLP(gpv3-1, INPUT, DOWN); |
| 1281 | PIN_SLP(gpv3-2, INPUT, DOWN); |
| 1282 | PIN_SLP(gpv3-3, INPUT, DOWN); |
| 1283 | PIN_SLP(gpv3-4, INPUT, DOWN); |
| 1284 | PIN_SLP(gpv3-5, INPUT, DOWN); |
| 1285 | PIN_SLP(gpv3-6, INPUT, DOWN); |
| 1286 | PIN_SLP(gpv3-7, INPUT, DOWN); |
| 1287 | |
| 1288 | PIN_SLP(gpv4-0, INPUT, DOWN); |
| 1289 | }; |
| 1290 | }; |