blob: d40e0c5281985ef2b5af4209d4f44e8186edc211 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * Initio A100 device driver for Linux.
3 *
4 * Copyright (c) 1994-1998 Initio Corporation
5 * All rights reserved.
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2, or (at your option)
10 * any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; see the file COPYING. If not, write to
19 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
20 *
Linus Torvalds1da177e2005-04-16 15:20:36 -070021 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
25 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31 * SUCH DAMAGE.
Alan Cox4023c4742007-06-15 14:45:30 +010032 *
Linus Torvalds1da177e2005-04-16 15:20:36 -070033 * Revision History:
34 * 06/18/98 HL, Initial production Version 1.02
35 * 12/19/98 bv, Use spinlocks for 2.1.95 and up
36 * 06/25/02 Doug Ledford <dledford@redhat.com>
37 * - This and the i60uscsi.h file are almost identical,
38 * merged them into a single header used by both .c files.
Alan Cox4023c4742007-06-15 14:45:30 +010039 * 14/06/07 Alan Cox <alan@redhat.com>
40 * - Grand cleanup and Linuxisation
Linus Torvalds1da177e2005-04-16 15:20:36 -070041 */
42
43#define inia100_REVID "Initio INI-A100U2W SCSI device driver; Revision: 1.02d"
44
Linus Torvalds1da177e2005-04-16 15:20:36 -070045#if 1
46#define ORC_MAXQUEUE 245
47#define ORC_MAXTAGS 64
48#else
49#define ORC_MAXQUEUE 25
50#define ORC_MAXTAGS 8
51#endif
52
53#define TOTAL_SG_ENTRY 32
54#define MAX_TARGETS 16
55#define IMAX_CDB 15
56#define SENSE_SIZE 14
57
58/************************************************************************/
59/* Scatter-Gather Element Structure */
60/************************************************************************/
Alan Cox4023c4742007-06-15 14:45:30 +010061struct orc_sgent {
62 u32 base; /* Data Pointer */
63 u32 length; /* Data Length */
64};
Linus Torvalds1da177e2005-04-16 15:20:36 -070065
66/* SCSI related definition */
67#define DISC_NOT_ALLOW 0x80 /* Disconnect is not allowed */
68#define DISC_ALLOW 0xC0 /* Disconnect is allowed */
69
70
71#define ORC_OFFSET_SCB 16
72#define ORC_MAX_SCBS 250
73#define MAX_CHANNELS 2
74#define MAX_ESCB_ELE 64
75#define TCF_DRV_255_63 0x0400
76
77/********************************************************/
78/* Orchid Host Command Set */
79/********************************************************/
80#define ORC_CMD_NOP 0x00 /* Host command - NOP */
81#define ORC_CMD_VERSION 0x01 /* Host command - Get F/W version */
82#define ORC_CMD_ECHO 0x02 /* Host command - ECHO */
83#define ORC_CMD_SET_NVM 0x03 /* Host command - Set NVRAM */
84#define ORC_CMD_GET_NVM 0x04 /* Host command - Get NVRAM */
85#define ORC_CMD_GET_BUS_STATUS 0x05 /* Host command - Get SCSI bus status */
86#define ORC_CMD_ABORT_SCB 0x06 /* Host command - Abort SCB */
87#define ORC_CMD_ISSUE_SCB 0x07 /* Host command - Issue SCB */
88
89/********************************************************/
90/* Orchid Register Set */
91/********************************************************/
92#define ORC_GINTS 0xA0 /* Global Interrupt Status */
93#define QINT 0x04 /* Reply Queue Interrupt */
94#define ORC_GIMSK 0xA1 /* Global Interrupt MASK */
95#define MQINT 0x04 /* Mask Reply Queue Interrupt */
96#define ORC_GCFG 0xA2 /* Global Configure */
97#define EEPRG 0x01 /* Enable EEPROM programming */
98#define ORC_GSTAT 0xA3 /* Global status */
99#define WIDEBUS 0x10 /* Wide SCSI Devices connected */
100#define ORC_HDATA 0xA4 /* Host Data */
101#define ORC_HCTRL 0xA5 /* Host Control */
102#define SCSIRST 0x80 /* SCSI bus reset */
103#define HDO 0x40 /* Host data out */
104#define HOSTSTOP 0x02 /* Host stop RISC engine */
105#define DEVRST 0x01 /* Device reset */
106#define ORC_HSTUS 0xA6 /* Host Status */
107#define HDI 0x02 /* Host data in */
108#define RREADY 0x01 /* RISC engine is ready to receive */
109#define ORC_NVRAM 0xA7 /* Nvram port address */
110#define SE2CS 0x008
111#define SE2CLK 0x004
112#define SE2DO 0x002
113#define SE2DI 0x001
114#define ORC_PQUEUE 0xA8 /* Posting queue FIFO */
115#define ORC_PQCNT 0xA9 /* Posting queue FIFO Cnt */
116#define ORC_RQUEUE 0xAA /* Reply queue FIFO */
117#define ORC_RQUEUECNT 0xAB /* Reply queue FIFO Cnt */
118#define ORC_FWBASEADR 0xAC /* Firmware base address */
119
120#define ORC_EBIOSADR0 0xB0 /* External Bios address */
121#define ORC_EBIOSADR1 0xB1 /* External Bios address */
122#define ORC_EBIOSADR2 0xB2 /* External Bios address */
123#define ORC_EBIOSDATA 0xB3 /* External Bios address */
124
125#define ORC_SCBSIZE 0xB7 /* SCB size register */
126#define ORC_SCBBASE0 0xB8 /* SCB base address 0 */
127#define ORC_SCBBASE1 0xBC /* SCB base address 1 */
128
129#define ORC_RISCCTL 0xE0 /* RISC Control */
130#define PRGMRST 0x002
131#define DOWNLOAD 0x001
132#define ORC_PRGMCTR0 0xE2 /* RISC program counter */
133#define ORC_PRGMCTR1 0xE3 /* RISC program counter */
134#define ORC_RISCRAM 0xEC /* RISC RAM data port 4 bytes */
135
Alan Cox4023c4742007-06-15 14:45:30 +0100136struct orc_extended_scb { /* Extended SCB */
137 struct orc_sgent sglist[TOTAL_SG_ENTRY]; /*0 Start of SG list */
138 struct scsi_cmnd *srb; /*50 SRB Pointer */
139};
Linus Torvalds1da177e2005-04-16 15:20:36 -0700140
141/***********************************************************************
142 SCSI Control Block
Linus Torvalds1da177e2005-04-16 15:20:36 -0700143
Alan Cox4023c4742007-06-15 14:45:30 +0100144 0x40 bytes long, the last 8 are user bytes
145************************************************************************/
146struct orc_scb { /* Scsi_Ctrl_Blk */
147 u8 opcode; /*00 SCB command code&residual */
148 u8 flags; /*01 SCB Flags */
149 u8 target; /*02 Target Id */
150 u8 lun; /*03 Lun */
151 u32 reserved0; /*04 Reserved for ORCHID must 0 */
152 u32 xferlen; /*08 Data Transfer Length */
153 u32 reserved1; /*0C Reserved for ORCHID must 0 */
154 u32 sg_len; /*10 SG list # * 8 */
155 u32 sg_addr; /*14 SG List Buf physical Addr */
156 u32 sg_addrhigh; /*18 SG Buffer high physical Addr */
157 u8 hastat; /*1C Host Status */
158 u8 tastat; /*1D Target Status */
159 u8 status; /*1E SCB status */
160 u8 link; /*1F Link pointer, default 0xFF */
161 u8 sense_len; /*20 Sense Allocation Length */
162 u8 cdb_len; /*21 CDB Length */
163 u8 ident; /*22 Identify */
164 u8 tag_msg; /*23 Tag Message */
165 u8 cdb[IMAX_CDB]; /*24 SCSI CDBs */
166 u8 scbidx; /*3C Index for this ORCSCB */
167 u32 sense_addr; /*34 Sense Buffer physical Addr */
168
169 struct orc_extended_scb *escb; /*38 Extended SCB Pointer */
170 /* 64bit pointer or 32bit pointer + reserved ? */
171#ifndef CONFIG_64BIT
172 u8 reserved2[4]; /*3E Reserved for Driver use */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700173#endif
Alan Cox4023c4742007-06-15 14:45:30 +0100174};
Linus Torvalds1da177e2005-04-16 15:20:36 -0700175
176/* Opcodes of ORCSCB_Opcode */
177#define ORC_EXECSCSI 0x00 /* SCSI initiator command with residual */
178#define ORC_BUSDEVRST 0x01 /* SCSI Bus Device Reset */
179
180/* Status of ORCSCB_Status */
181#define ORCSCB_COMPLETE 0x00 /* SCB request completed */
182#define ORCSCB_POST 0x01 /* SCB is posted by the HOST */
183
184/* Bit Definition for ORCSCB_Flags */
185#define SCF_DISINT 0x01 /* Disable HOST interrupt */
186#define SCF_DIR 0x18 /* Direction bits */
187#define SCF_NO_DCHK 0x00 /* Direction determined by SCSI */
188#define SCF_DIN 0x08 /* From Target to Initiator */
189#define SCF_DOUT 0x10 /* From Initiator to Target */
190#define SCF_NO_XF 0x18 /* No data transfer */
191#define SCF_POLL 0x40
192
193/* Error Codes for ORCSCB_HaStat */
194#define HOST_SEL_TOUT 0x11
195#define HOST_DO_DU 0x12
196#define HOST_BUS_FREE 0x13
197#define HOST_BAD_PHAS 0x14
198#define HOST_INV_CMD 0x16
199#define HOST_SCSI_RST 0x1B
200#define HOST_DEV_RST 0x1C
201
202
203/* Error Codes for ORCSCB_TaStat */
204#define TARGET_CHK_COND 0x02
205#define TARGET_BUSY 0x08
206#define TARGET_TAG_FULL 0x28
207
208
209/***********************************************************************
210 Target Device Control Structure
211**********************************************************************/
212
Alan Cox4023c4742007-06-15 14:45:30 +0100213struct orc_target {
214 u8 TCS_DrvDASD; /* 6 */
215 u8 TCS_DrvSCSI; /* 7 */
216 u8 TCS_DrvHead; /* 8 */
217 u16 TCS_DrvFlags; /* 4 */
218 u8 TCS_DrvSector; /* 7 */
219};
Linus Torvalds1da177e2005-04-16 15:20:36 -0700220
221/* Bit Definition for TCF_DrvFlags */
222#define TCS_DF_NODASD_SUPT 0x20 /* Suppress OS/2 DASD Mgr support */
223#define TCS_DF_NOSCSI_SUPT 0x40 /* Suppress OS/2 SCSI Mgr support */
224
225
226/***********************************************************************
227 Host Adapter Control Structure
228************************************************************************/
Alan Cox4023c4742007-06-15 14:45:30 +0100229struct orc_host {
230 unsigned long base; /* Base address */
231 u8 index; /* Index (Channel)*/
232 u8 scsi_id; /* H/A SCSI ID */
233 u8 BIOScfg; /*BIOS configuration */
234 u8 flags;
235 u8 max_targets; /* SCSI0MAXTags */
236 struct orc_scb *scb_virt; /* Virtual Pointer to SCB array */
237 dma_addr_t scb_phys; /* Scb Physical address */
238 struct orc_extended_scb *escb_virt; /* Virtual pointer to ESCB Scatter list */
239 dma_addr_t escb_phys; /* scatter list Physical address */
240 u8 target_flag[16]; /* target configuration, TCF_EN_TAG */
241 u8 max_tags[16]; /* ORC_MAX_SCBS */
242 u32 allocation_map[MAX_CHANNELS][8]; /* Max STB is 256, So 256/32 */
243 spinlock_t allocation_lock;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700244 struct pci_dev *pdev;
Alan Cox4023c4742007-06-15 14:45:30 +0100245};
Linus Torvalds1da177e2005-04-16 15:20:36 -0700246
247/* Bit Definition for HCS_Flags */
248
249#define HCF_SCSI_RESET 0x01 /* SCSI BUS RESET */
250#define HCF_PARITY 0x02 /* parity card */
251#define HCF_LVDS 0x10 /* parity card */
252
253/* Bit Definition for TargetFlag */
254
255#define TCF_EN_255 0x08
256#define TCF_EN_TAG 0x10
257#define TCF_BUSY 0x20
258#define TCF_DISCONNECT 0x40
259#define TCF_SPIN_UP 0x80
260
261/* Bit Definition for HCS_AFlags */
262#define HCS_AF_IGNORE 0x01 /* Adapter ignore */
263#define HCS_AF_DISABLE_RESET 0x10 /* Adapter disable reset */
264#define HCS_AF_DISABLE_ADPT 0x80 /* Adapter disable */
265
Alan Cox4023c4742007-06-15 14:45:30 +0100266struct orc_nvram {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700267/*----------header ---------------*/
Alan Cox4023c4742007-06-15 14:45:30 +0100268 u8 SubVendorID0; /* 00 - Sub Vendor ID */
269 u8 SubVendorID1; /* 00 - Sub Vendor ID */
270 u8 SubSysID0; /* 02 - Sub System ID */
271 u8 SubSysID1; /* 02 - Sub System ID */
272 u8 SubClass; /* 04 - Sub Class */
273 u8 VendorID0; /* 05 - Vendor ID */
274 u8 VendorID1; /* 05 - Vendor ID */
275 u8 DeviceID0; /* 07 - Device ID */
276 u8 DeviceID1; /* 07 - Device ID */
277 u8 Reserved0[2]; /* 09 - Reserved */
278 u8 revision; /* 0B - revision of data structure */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700279 /* ----Host Adapter Structure ---- */
Alan Cox4023c4742007-06-15 14:45:30 +0100280 u8 NumOfCh; /* 0C - Number of SCSI channel */
281 u8 BIOSConfig1; /* 0D - BIOS configuration 1 */
282 u8 BIOSConfig2; /* 0E - BIOS boot channel&target ID */
283 u8 BIOSConfig3; /* 0F - BIOS configuration 3 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700284 /* ----SCSI channel Structure ---- */
285 /* from "CTRL-I SCSI Host Adapter SetUp menu " */
Alan Cox4023c4742007-06-15 14:45:30 +0100286 u8 scsi_id; /* 10 - Channel 0 SCSI ID */
287 u8 SCSI0Config; /* 11 - Channel 0 SCSI configuration */
288 u8 SCSI0MaxTags; /* 12 - Channel 0 Maximum tags */
289 u8 SCSI0ResetTime; /* 13 - Channel 0 Reset recovering time */
290 u8 ReservedforChannel0[2]; /* 14 - Reserved */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700291
292 /* ----SCSI target Structure ---- */
293 /* from "CTRL-I SCSI device SetUp menu " */
Alan Cox4023c4742007-06-15 14:45:30 +0100294 u8 Target00Config; /* 16 - Channel 0 Target 0 config */
295 u8 Target01Config; /* 17 - Channel 0 Target 1 config */
296 u8 Target02Config; /* 18 - Channel 0 Target 2 config */
297 u8 Target03Config; /* 19 - Channel 0 Target 3 config */
298 u8 Target04Config; /* 1A - Channel 0 Target 4 config */
299 u8 Target05Config; /* 1B - Channel 0 Target 5 config */
300 u8 Target06Config; /* 1C - Channel 0 Target 6 config */
301 u8 Target07Config; /* 1D - Channel 0 Target 7 config */
302 u8 Target08Config; /* 1E - Channel 0 Target 8 config */
303 u8 Target09Config; /* 1F - Channel 0 Target 9 config */
304 u8 Target0AConfig; /* 20 - Channel 0 Target A config */
305 u8 Target0BConfig; /* 21 - Channel 0 Target B config */
306 u8 Target0CConfig; /* 22 - Channel 0 Target C config */
307 u8 Target0DConfig; /* 23 - Channel 0 Target D config */
308 u8 Target0EConfig; /* 24 - Channel 0 Target E config */
309 u8 Target0FConfig; /* 25 - Channel 0 Target F config */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700310
Alan Cox4023c4742007-06-15 14:45:30 +0100311 u8 SCSI1Id; /* 26 - Channel 1 SCSI ID */
312 u8 SCSI1Config; /* 27 - Channel 1 SCSI configuration */
313 u8 SCSI1MaxTags; /* 28 - Channel 1 Maximum tags */
314 u8 SCSI1ResetTime; /* 29 - Channel 1 Reset recovering time */
315 u8 ReservedforChannel1[2]; /* 2A - Reserved */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700316
317 /* ----SCSI target Structure ---- */
318 /* from "CTRL-I SCSI device SetUp menu " */
Alan Cox4023c4742007-06-15 14:45:30 +0100319 u8 Target10Config; /* 2C - Channel 1 Target 0 config */
320 u8 Target11Config; /* 2D - Channel 1 Target 1 config */
321 u8 Target12Config; /* 2E - Channel 1 Target 2 config */
322 u8 Target13Config; /* 2F - Channel 1 Target 3 config */
323 u8 Target14Config; /* 30 - Channel 1 Target 4 config */
324 u8 Target15Config; /* 31 - Channel 1 Target 5 config */
325 u8 Target16Config; /* 32 - Channel 1 Target 6 config */
326 u8 Target17Config; /* 33 - Channel 1 Target 7 config */
327 u8 Target18Config; /* 34 - Channel 1 Target 8 config */
328 u8 Target19Config; /* 35 - Channel 1 Target 9 config */
329 u8 Target1AConfig; /* 36 - Channel 1 Target A config */
330 u8 Target1BConfig; /* 37 - Channel 1 Target B config */
331 u8 Target1CConfig; /* 38 - Channel 1 Target C config */
332 u8 Target1DConfig; /* 39 - Channel 1 Target D config */
333 u8 Target1EConfig; /* 3A - Channel 1 Target E config */
334 u8 Target1FConfig; /* 3B - Channel 1 Target F config */
335 u8 reserved[3]; /* 3C - Reserved */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700336 /* ---------- CheckSum ---------- */
Alan Cox4023c4742007-06-15 14:45:30 +0100337 u8 CheckSum; /* 3F - Checksum of NVRam */
338};
Linus Torvalds1da177e2005-04-16 15:20:36 -0700339
340/* Bios Configuration for nvram->BIOSConfig1 */
341#define NBC_BIOSENABLE 0x01 /* BIOS enable */
342#define NBC_CDROM 0x02 /* Support bootable CDROM */
343#define NBC_REMOVABLE 0x04 /* Support removable drive */
344
345/* Bios Configuration for nvram->BIOSConfig2 */
346#define NBB_TARGET_MASK 0x0F /* Boot SCSI target ID number */
347#define NBB_CHANL_MASK 0xF0 /* Boot SCSI channel number */
348
349/* Bit definition for nvram->SCSIConfig */
350#define NCC_BUSRESET 0x01 /* Reset SCSI bus at power up */
351#define NCC_PARITYCHK 0x02 /* SCSI parity enable */
352#define NCC_LVDS 0x10 /* Enable LVDS */
353#define NCC_ACTTERM1 0x20 /* Enable active terminator 1 */
354#define NCC_ACTTERM2 0x40 /* Enable active terminator 2 */
355#define NCC_AUTOTERM 0x80 /* Enable auto termination */
356
357/* Bit definition for nvram->TargetxConfig */
358#define NTC_PERIOD 0x07 /* Maximum Sync. Speed */
359#define NTC_1GIGA 0x08 /* 255 head / 63 sectors (64/32) */
360#define NTC_NO_SYNC 0x10 /* NO SYNC. NEGO */
361#define NTC_NO_WIDESYNC 0x20 /* NO WIDE SYNC. NEGO */
362#define NTC_DISC_ENABLE 0x40 /* Enable SCSI disconnect */
363#define NTC_SPINUP 0x80 /* Start disk drive */
364
365/* Default NVRam values */
366#define NBC_DEFAULT (NBC_ENABLE)
367#define NCC_DEFAULT (NCC_BUSRESET | NCC_AUTOTERM | NCC_PARITYCHK)
368#define NCC_MAX_TAGS 0x20 /* Maximum tags per target */
369#define NCC_RESET_TIME 0x0A /* SCSI RESET recovering time */
370#define NTC_DEFAULT (NTC_1GIGA | NTC_NO_WIDESYNC | NTC_DISC_ENABLE)
371