blob: 6e25889db9d4512cdf89403bb09b55d8405c97b4 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * Sun3 SCSI stuff by Erik Verbruggen (erik@bigmama.xtdnet.nl)
3 *
4 * Sun3 DMA routines added by Sam Creasey (sammy@sammy.net)
5 *
6 * Adapted from mac_scsinew.c:
7 */
8/*
9 * Generic Macintosh NCR5380 driver
10 *
11 * Copyright 1998, Michael Schmitz <mschmitz@lbl.gov>
12 *
13 * derived in part from:
14 */
15/*
16 * Generic Generic NCR5380 driver
17 *
18 * Copyright 1995, Russell King
19 *
20 * ALPHA RELEASE 1.
21 *
22 * For more information, please consult
23 *
24 * NCR 5380 Family
25 * SCSI Protocol Controller
26 * Databook
27 *
28 * NCR Microelectronics
29 * 1635 Aeroplaza Drive
30 * Colorado Springs, CO 80916
31 * 1+ (719) 578-3400
32 * 1+ (800) 334-5454
33 */
34
35
36/*
37 * This is from mac_scsi.h, but hey, maybe this is useful for Sun3 too! :)
38 *
39 * Options :
40 *
41 * PARITY - enable parity checking. Not supported.
42 *
43 * SCSI2 - enable support for SCSI-II tagged queueing. Untested.
44 *
45 * USLEEP - enable support for devices that don't disconnect. Untested.
46 */
47
48/*
49 * $Log: sun3_NCR5380.c,v $
50 */
51
52#define AUTOSENSE
53
54#include <linux/types.h>
55#include <linux/stddef.h>
56#include <linux/ctype.h>
57#include <linux/delay.h>
58
59#include <linux/module.h>
60#include <linux/signal.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070061#include <linux/ioport.h>
62#include <linux/init.h>
63#include <linux/blkdev.h>
64
65#include <asm/io.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070066
67#include <asm/sun3ints.h>
68#include <asm/dvma.h>
69#include <asm/idprom.h>
70#include <asm/machines.h>
71
Geert Uytterhoeven2ba51ea2011-06-13 20:39:21 +020072#define NDEBUG 0
73
74#define NDEBUG_ABORT 0x00100000
75#define NDEBUG_TAGS 0x00200000
76#define NDEBUG_MERGING 0x00400000
77
Linus Torvalds1da177e2005-04-16 15:20:36 -070078/* dma on! */
79#define REAL_DMA
80
81#include "scsi.h"
Sam Creaseyc39e7ee2006-12-09 10:37:05 +010082#include "initio.h"
Linus Torvalds1da177e2005-04-16 15:20:36 -070083#include <scsi/scsi_host.h>
84#include "sun3_scsi.h"
Linus Torvalds1da177e2005-04-16 15:20:36 -070085
86static void NCR5380_print(struct Scsi_Host *instance);
87
88/* #define OLDDMA */
89
90#define USE_WRAPPER
91/*#define RESET_BOOT */
92#define DRIVER_SETUP
93
Linus Torvalds1da177e2005-04-16 15:20:36 -070094/*
95 * BUG can be used to trigger a strange code-size related hang on 2.1 kernels
96 */
97#ifdef BUG
98#undef RESET_BOOT
99#undef DRIVER_SETUP
100#endif
101
102/* #define SUPPORT_TAGS */
103
104#define ENABLE_IRQ() enable_irq( IRQ_SUN3_SCSI );
105
106
David Howells7d12e782006-10-05 14:55:46 +0100107static irqreturn_t scsi_sun3_intr(int irq, void *dummy);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700108static inline unsigned char sun3scsi_read(int reg);
109static inline void sun3scsi_write(int reg, int value);
110
111static int setup_can_queue = -1;
112module_param(setup_can_queue, int, 0);
113static int setup_cmd_per_lun = -1;
114module_param(setup_cmd_per_lun, int, 0);
115static int setup_sg_tablesize = -1;
116module_param(setup_sg_tablesize, int, 0);
117#ifdef SUPPORT_TAGS
118static int setup_use_tagged_queuing = -1;
119module_param(setup_use_tagged_queuing, int, 0);
120#endif
121static int setup_hostid = -1;
122module_param(setup_hostid, int, 0);
123
Henne811c9362006-10-03 19:51:59 +0200124static struct scsi_cmnd *sun3_dma_setup_done = NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700125
126#define AFTER_RESET_DELAY (HZ/2)
127
128/* ms to wait after hitting dma regs */
129#define SUN3_DMA_DELAY 10
130
131/* dvma buffer to allocate -- 32k should hopefully be more than sufficient */
132#define SUN3_DVMA_BUFSIZE 0xe000
133
134/* minimum number of bytes to do dma on */
135#define SUN3_DMA_MINSIZE 128
136
137static volatile unsigned char *sun3_scsi_regp;
138static volatile struct sun3_dma_regs *dregs;
139#ifdef OLDDMA
140static unsigned char *dmabuf = NULL; /* dma memory buffer */
141#endif
142static struct sun3_udc_regs *udc_regs = NULL;
143static unsigned char *sun3_dma_orig_addr = NULL;
144static unsigned long sun3_dma_orig_count = 0;
145static int sun3_dma_active = 0;
146static unsigned long last_residual = 0;
147
148/*
149 * NCR 5380 register access functions
150 */
151
152static inline unsigned char sun3scsi_read(int reg)
153{
154 return( sun3_scsi_regp[reg] );
155}
156
157static inline void sun3scsi_write(int reg, int value)
158{
159 sun3_scsi_regp[reg] = value;
160}
161
162/* dma controller register access functions */
163
164static inline unsigned short sun3_udc_read(unsigned char reg)
165{
166 unsigned short ret;
167
168 dregs->udc_addr = UDC_CSR;
169 udelay(SUN3_DMA_DELAY);
170 ret = dregs->udc_data;
171 udelay(SUN3_DMA_DELAY);
172
173 return ret;
174}
175
176static inline void sun3_udc_write(unsigned short val, unsigned char reg)
177{
178 dregs->udc_addr = reg;
179 udelay(SUN3_DMA_DELAY);
180 dregs->udc_data = val;
181 udelay(SUN3_DMA_DELAY);
182}
183
184/*
185 * XXX: status debug
186 */
187static struct Scsi_Host *default_instance;
188
189/*
Christoph Hellwigd0be4a7d2005-10-31 18:31:40 +0100190 * Function : int sun3scsi_detect(struct scsi_host_template * tpnt)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700191 *
192 * Purpose : initializes mac NCR5380 driver based on the
193 * command line / compile time port and irq definitions.
194 *
195 * Inputs : tpnt - template for this SCSI adapter.
196 *
197 * Returns : 1 if a host adapter was found, 0 if not.
198 *
199 */
200
Geert Uytterhoevend559c492011-06-13 20:39:18 +0200201int __init sun3scsi_detect(struct scsi_host_template * tpnt)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700202{
203 unsigned long ioaddr;
204 static int called = 0;
205 struct Scsi_Host *instance;
206
207 /* check that this machine has an onboard 5380 */
208 switch(idprom->id_machtype) {
209 case SM_SUN3|SM_3_50:
210 case SM_SUN3|SM_3_60:
211 break;
212
213 default:
214 return 0;
215 }
216
217 if(called)
218 return 0;
219
220 tpnt->proc_name = "Sun3 5380 SCSI";
221
222 /* setup variables */
223 tpnt->can_queue =
224 (setup_can_queue > 0) ? setup_can_queue : CAN_QUEUE;
225 tpnt->cmd_per_lun =
226 (setup_cmd_per_lun > 0) ? setup_cmd_per_lun : CMD_PER_LUN;
227 tpnt->sg_tablesize =
228 (setup_sg_tablesize >= 0) ? setup_sg_tablesize : SG_TABLESIZE;
229
230 if (setup_hostid >= 0)
231 tpnt->this_id = setup_hostid;
232 else {
233 /* use 7 as default */
234 tpnt->this_id = 7;
235 }
236
237 ioaddr = (unsigned long)ioremap(IOBASE_SUN3_SCSI, PAGE_SIZE);
238 sun3_scsi_regp = (unsigned char *)ioaddr;
239
240 dregs = (struct sun3_dma_regs *)(((unsigned char *)ioaddr) + 8);
241
242 if((udc_regs = dvma_malloc(sizeof(struct sun3_udc_regs)))
243 == NULL) {
244 printk("SUN3 Scsi couldn't allocate DVMA memory!\n");
245 return 0;
246 }
247#ifdef OLDDMA
248 if((dmabuf = dvma_malloc_align(SUN3_DVMA_BUFSIZE, 0x10000)) == NULL) {
249 printk("SUN3 Scsi couldn't allocate DVMA memory!\n");
250 return 0;
251 }
252#endif
253#ifdef SUPPORT_TAGS
254 if (setup_use_tagged_queuing < 0)
255 setup_use_tagged_queuing = USE_TAGGED_QUEUING;
256#endif
257
258 instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata));
259 if(instance == NULL)
260 return 0;
261
262 default_instance = instance;
263
264 instance->io_port = (unsigned long) ioaddr;
265 instance->irq = IRQ_SUN3_SCSI;
266
267 NCR5380_init(instance, 0);
268
269 instance->n_io_port = 32;
270
271 ((struct NCR5380_hostdata *)instance->hostdata)->ctrl = 0;
272
273 if (request_irq(instance->irq, scsi_sun3_intr,
Jeff Garzik1e641662007-11-11 19:52:05 -0500274 0, "Sun3SCSI-5380", instance)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700275#ifndef REAL_DMA
276 printk("scsi%d: IRQ%d not free, interrupts disabled\n",
277 instance->host_no, instance->irq);
278 instance->irq = SCSI_IRQ_NONE;
279#else
280 printk("scsi%d: IRQ%d not free, bailing out\n",
281 instance->host_no, instance->irq);
282 return 0;
283#endif
284 }
285
286 printk("scsi%d: Sun3 5380 at port %lX irq", instance->host_no, instance->io_port);
287 if (instance->irq == SCSI_IRQ_NONE)
288 printk ("s disabled");
289 else
290 printk (" %d", instance->irq);
291 printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
292 instance->can_queue, instance->cmd_per_lun,
293 SUN3SCSI_PUBLIC_RELEASE);
294 printk("\nscsi%d:", instance->host_no);
295 NCR5380_print_options(instance);
296 printk("\n");
297
298 dregs->csr = 0;
299 udelay(SUN3_DMA_DELAY);
300 dregs->csr = CSR_SCSI | CSR_FIFO | CSR_INTR;
301 udelay(SUN3_DMA_DELAY);
302 dregs->fifo_count = 0;
303
304 called = 1;
305
306#ifdef RESET_BOOT
307 sun3_scsi_reset_boot(instance);
308#endif
309
310 return 1;
311}
312
313int sun3scsi_release (struct Scsi_Host *shpnt)
314{
315 if (shpnt->irq != SCSI_IRQ_NONE)
Jeff Garzik1e641662007-11-11 19:52:05 -0500316 free_irq(shpnt->irq, shpnt);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700317
318 iounmap((void *)sun3_scsi_regp);
319
Geert Uytterhoeven19b6c512011-06-13 20:39:19 +0200320 NCR5380_exit(shpnt);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700321 return 0;
322}
323
324#ifdef RESET_BOOT
325/*
326 * Our 'bus reset on boot' function
327 */
328
329static void sun3_scsi_reset_boot(struct Scsi_Host *instance)
330{
331 unsigned long end;
332
333 NCR5380_local_declare();
334 NCR5380_setup(instance);
335
336 /*
337 * Do a SCSI reset to clean up the bus during initialization. No
338 * messing with the queues, interrupts, or locks necessary here.
339 */
340
341 printk( "Sun3 SCSI: resetting the SCSI bus..." );
342
343 /* switch off SCSI IRQ - catch an interrupt without IRQ bit set else */
344// sun3_disable_irq( IRQ_SUN3_SCSI );
345
346 /* get in phase */
347 NCR5380_write( TARGET_COMMAND_REG,
348 PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) ));
349
350 /* assert RST */
351 NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST );
352
353 /* The min. reset hold time is 25us, so 40us should be enough */
354 udelay( 50 );
355
356 /* reset RST and interrupt */
357 NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE );
358 NCR5380_read( RESET_PARITY_INTERRUPT_REG );
359
360 for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); )
361 barrier();
362
363 /* switch on SCSI IRQ again */
364// sun3_enable_irq( IRQ_SUN3_SCSI );
365
366 printk( " done\n" );
367}
368#endif
369
370const char * sun3scsi_info (struct Scsi_Host *spnt) {
371 return "";
372}
373
374// safe bits for the CSR
375#define CSR_GOOD 0x060f
376
David Howells7d12e782006-10-05 14:55:46 +0100377static irqreturn_t scsi_sun3_intr(int irq, void *dummy)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700378{
379 unsigned short csr = dregs->csr;
380 int handled = 0;
381
382 if(csr & ~CSR_GOOD) {
383 if(csr & CSR_DMA_BUSERR) {
384 printk("scsi%d: bus error in dma\n", default_instance->host_no);
385 }
386
387 if(csr & CSR_DMA_CONFLICT) {
388 printk("scsi%d: dma conflict\n", default_instance->host_no);
389 }
390 handled = 1;
391 }
392
393 if(csr & (CSR_SDB_INT | CSR_DMA_INT)) {
David Howells7d12e782006-10-05 14:55:46 +0100394 NCR5380_intr(irq, dummy);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700395 handled = 1;
396 }
397
398 return IRQ_RETVAL(handled);
399}
400
401/*
402 * Debug stuff - to be called on NMI, or sysrq key. Use at your own risk;
403 * reentering NCR5380_print_status seems to have ugly side effects
404 */
405
406/* this doesn't seem to get used at all -- sam */
407#if 0
408void sun3_sun3_debug (void)
409{
410 unsigned long flags;
411 NCR5380_local_declare();
412
413 if (default_instance) {
414 local_irq_save(flags);
415 NCR5380_print_status(default_instance);
416 local_irq_restore(flags);
417 }
418}
419#endif
420
421
422/* sun3scsi_dma_setup() -- initialize the dma controller for a read/write */
423static unsigned long sun3scsi_dma_setup(void *data, unsigned long count, int write_flag)
424{
425#ifdef OLDDMA
426 if(write_flag)
427 memcpy(dmabuf, data, count);
428 else {
429 sun3_dma_orig_addr = data;
430 sun3_dma_orig_count = count;
431 }
432#else
433 void *addr;
434
435 if(sun3_dma_orig_addr != NULL)
436 dvma_unmap(sun3_dma_orig_addr);
437
438// addr = sun3_dvma_page((unsigned long)data, (unsigned long)dmabuf);
439 addr = (void *)dvma_map((unsigned long) data, count);
440
441 sun3_dma_orig_addr = addr;
442 sun3_dma_orig_count = count;
443#endif
444 dregs->fifo_count = 0;
445 sun3_udc_write(UDC_RESET, UDC_CSR);
446
447 /* reset fifo */
448 dregs->csr &= ~CSR_FIFO;
449 dregs->csr |= CSR_FIFO;
450
451 /* set direction */
452 if(write_flag)
453 dregs->csr |= CSR_SEND;
454 else
455 dregs->csr &= ~CSR_SEND;
456
457 /* byte count for fifo */
458 dregs->fifo_count = count;
459
460 sun3_udc_write(UDC_RESET, UDC_CSR);
461
462 /* reset fifo */
463 dregs->csr &= ~CSR_FIFO;
464 dregs->csr |= CSR_FIFO;
465
466 if(dregs->fifo_count != count) {
467 printk("scsi%d: fifo_mismatch %04x not %04x\n",
468 default_instance->host_no, dregs->fifo_count,
469 (unsigned int) count);
470 NCR5380_print(default_instance);
471 }
472
473 /* setup udc */
474#ifdef OLDDMA
475 udc_regs->addr_hi = ((dvma_vtob(dmabuf) & 0xff0000) >> 8);
476 udc_regs->addr_lo = (dvma_vtob(dmabuf) & 0xffff);
477#else
478 udc_regs->addr_hi = (((unsigned long)(addr) & 0xff0000) >> 8);
479 udc_regs->addr_lo = ((unsigned long)(addr) & 0xffff);
480#endif
481 udc_regs->count = count/2; /* count in words */
482 udc_regs->mode_hi = UDC_MODE_HIWORD;
483 if(write_flag) {
484 if(count & 1)
485 udc_regs->count++;
486 udc_regs->mode_lo = UDC_MODE_LSEND;
487 udc_regs->rsel = UDC_RSEL_SEND;
488 } else {
489 udc_regs->mode_lo = UDC_MODE_LRECV;
490 udc_regs->rsel = UDC_RSEL_RECV;
491 }
492
493 /* announce location of regs block */
494 sun3_udc_write(((dvma_vtob(udc_regs) & 0xff0000) >> 8),
495 UDC_CHN_HI);
496
497 sun3_udc_write((dvma_vtob(udc_regs) & 0xffff), UDC_CHN_LO);
498
499 /* set dma master on */
500 sun3_udc_write(0xd, UDC_MODE);
501
502 /* interrupt enable */
503 sun3_udc_write(UDC_INT_ENABLE, UDC_CSR);
504
505 return count;
506
507}
508
509static inline unsigned long sun3scsi_dma_count(struct Scsi_Host *instance)
510{
511 unsigned short resid;
512
513 dregs->udc_addr = 0x32;
514 udelay(SUN3_DMA_DELAY);
515 resid = dregs->udc_data;
516 udelay(SUN3_DMA_DELAY);
517 resid *= 2;
518
519 return (unsigned long) resid;
520}
521
522static inline unsigned long sun3scsi_dma_residual(struct Scsi_Host *instance)
523{
524 return last_residual;
525}
526
Henne811c9362006-10-03 19:51:59 +0200527static inline unsigned long sun3scsi_dma_xfer_len(unsigned long wanted,
528 struct scsi_cmnd *cmd,
529 int write_flag)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700530{
Christoph Hellwig33659eb2010-08-07 18:17:56 +0200531 if (cmd->request->cmd_type == REQ_TYPE_FS)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700532 return wanted;
533 else
534 return 0;
535}
536
537static inline int sun3scsi_dma_start(unsigned long count, unsigned char *data)
538{
539
540 sun3_udc_write(UDC_CHN_START, UDC_CSR);
541
542 return 0;
543}
544
545/* clean up after our dma is done */
546static int sun3scsi_dma_finish(int write_flag)
547{
548 unsigned short count;
549 unsigned short fifo;
550 int ret = 0;
551
552 sun3_dma_active = 0;
553#if 1
554 // check to empty the fifo on a read
555 if(!write_flag) {
556 int tmo = 20000; /* .2 sec */
557
558 while(1) {
559 if(dregs->csr & CSR_FIFO_EMPTY)
560 break;
561
562 if(--tmo <= 0) {
563 printk("sun3scsi: fifo failed to empty!\n");
564 return 1;
565 }
566 udelay(10);
567 }
568 }
569
570#endif
571
572 count = sun3scsi_dma_count(default_instance);
573#ifdef OLDDMA
574
575 /* if we've finished a read, copy out the data we read */
576 if(sun3_dma_orig_addr) {
577 /* check for residual bytes after dma end */
578 if(count && (NCR5380_read(BUS_AND_STATUS_REG) &
579 (BASR_PHASE_MATCH | BASR_ACK))) {
580 printk("scsi%d: sun3_scsi_finish: read overrun baby... ", default_instance->host_no);
581 printk("basr now %02x\n", NCR5380_read(BUS_AND_STATUS_REG));
582 ret = count;
583 }
584
585 /* copy in what we dma'd no matter what */
586 memcpy(sun3_dma_orig_addr, dmabuf, sun3_dma_orig_count);
587 sun3_dma_orig_addr = NULL;
588
589 }
590#else
591
592 fifo = dregs->fifo_count;
593 last_residual = fifo;
594
595 /* empty bytes from the fifo which didn't make it */
596 if((!write_flag) && (count - fifo) == 2) {
597 unsigned short data;
598 unsigned char *vaddr;
599
600 data = dregs->fifo_data;
601 vaddr = (unsigned char *)dvma_btov(sun3_dma_orig_addr);
602
603 vaddr += (sun3_dma_orig_count - fifo);
604
605 vaddr[-2] = (data & 0xff00) >> 8;
606 vaddr[-1] = (data & 0xff);
607 }
608
609 dvma_unmap(sun3_dma_orig_addr);
610 sun3_dma_orig_addr = NULL;
611#endif
612 sun3_udc_write(UDC_RESET, UDC_CSR);
613 dregs->fifo_count = 0;
614 dregs->csr &= ~CSR_SEND;
615
616 /* reset fifo */
617 dregs->csr &= ~CSR_FIFO;
618 dregs->csr |= CSR_FIFO;
619
620 sun3_dma_setup_done = NULL;
621
622 return ret;
623
624}
625
626#include "sun3_NCR5380.c"
627
Christoph Hellwigd0be4a7d2005-10-31 18:31:40 +0100628static struct scsi_host_template driver_template = {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700629 .name = SUN3_SCSI_NAME,
630 .detect = sun3scsi_detect,
631 .release = sun3scsi_release,
632 .info = sun3scsi_info,
633 .queuecommand = sun3scsi_queue_command,
634 .eh_abort_handler = sun3scsi_abort,
635 .eh_bus_reset_handler = sun3scsi_bus_reset,
636 .can_queue = CAN_QUEUE,
637 .this_id = 7,
638 .sg_tablesize = SG_TABLESIZE,
639 .cmd_per_lun = CMD_PER_LUN,
640 .use_clustering = DISABLE_CLUSTERING
641};
642
643
644#include "scsi_module.c"
645
646MODULE_LICENSE("GPL");