blob: e681681ab7a2c91e88efc933eb66c8b0e807fd02 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * ultrastor.c Copyright (C) 1992 David B. Gentzel
3 * Low-level SCSI driver for UltraStor 14F, 24F, and 34F
4 * by David B. Gentzel, Whitfield Software Services, Carnegie, PA
5 * (gentzel@nova.enet.dec.com)
6 * scatter/gather added by Scott Taylor (n217cg@tamuts.tamu.edu)
7 * 24F and multiple command support by John F. Carr (jfc@athena.mit.edu)
8 * John's work modified by Caleb Epstein (cae@jpmorgan.com) and
9 * Eric Youngdale (ericy@cais.com).
10 * Thanks to UltraStor for providing the necessary documentation
11 *
12 * This is an old driver, for the 14F and 34F you should be using the
13 * u14-34f driver instead.
14 */
15
16/*
17 * TODO:
18 * 1. Find out why scatter/gather is limited to 16 requests per command.
19 * This is fixed, at least on the 24F, as of version 1.12 - CAE.
20 * 2. Look at command linking (mscp.command_link and
21 * mscp.command_link_id). (Does not work with many disks,
22 * and no performance increase. ERY).
23 * 3. Allow multiple adapters.
24 */
25
26/*
27 * NOTES:
28 * The UltraStor 14F, 24F, and 34F are a family of intelligent, high
29 * performance SCSI-2 host adapters. They all support command queueing
30 * and scatter/gather I/O. Some of them can also emulate the standard
31 * WD1003 interface for use with OS's which don't support SCSI. Here
32 * is the scoop on the various models:
33 * 14F - ISA first-party DMA HA with floppy support and WD1003 emulation.
34 * 14N - ISA HA with floppy support. I think that this is a non-DMA
35 * HA. Nothing further known.
36 * 24F - EISA Bus Master HA with floppy support and WD1003 emulation.
37 * 34F - VL-Bus Bus Master HA with floppy support (no WD1003 emulation).
38 *
39 * The 14F, 24F, and 34F are supported by this driver.
40 *
41 * Places flagged with a triple question-mark are things which are either
42 * unfinished, questionable, or wrong.
43 */
44
45/* Changes from version 1.11 alpha to 1.12
46 *
47 * Increased the size of the scatter-gather list to 33 entries for
48 * the 24F adapter (it was 16). I don't have the specs for the 14F
49 * or the 34F, so they may support larger s-g lists as well.
50 *
51 * Caleb Epstein <cae@jpmorgan.com>
52 */
53
54/* Changes from version 1.9 to 1.11
55 *
56 * Patches to bring this driver up to speed with the default kernel
57 * driver which supports only the 14F and 34F adapters. This version
58 * should compile cleanly into 0.99.13, 0.99.12 and probably 0.99.11.
59 *
60 * Fixes from Eric Youngdale to fix a few possible race conditions and
61 * several problems with bit testing operations (insufficient
62 * parentheses).
63 *
64 * Removed the ultrastor_abort() and ultrastor_reset() functions
65 * (enclosed them in #if 0 / #endif). These functions, at least on
66 * the 24F, cause the SCSI bus to do odd things and generally lead to
67 * kernel panics and machine hangs. This is like the Adaptec code.
68 *
69 * Use check/snarf_region for 14f, 34f to avoid I/O space address conflicts.
70 */
71
72/* Changes from version 1.8 to version 1.9
73 *
74 * 0.99.11 patches (cae@jpmorgan.com) */
75
76/* Changes from version 1.7 to version 1.8
77 *
78 * Better error reporting.
79 */
80
81/* Changes from version 1.6 to version 1.7
82 *
83 * Removed CSIR command code.
84 *
85 * Better race condition avoidance (xchgb function added).
86 *
87 * Set ICM and OGM status to zero at probe (24F)
88 *
89 * reset sends soft reset to UltraStor adapter
90 *
91 * reset adapter if adapter interrupts with an invalid MSCP address
92 *
93 * handle aborted command interrupt (24F)
94 *
95 */
96
97/* Changes from version 1.5 to version 1.6:
98 *
99 * Read MSCP address from ICM _before_ clearing the interrupt flag.
100 * This fixes a race condition.
101 */
102
103/* Changes from version 1.4 to version 1.5:
104 *
105 * Abort now calls done when multiple commands are enabled.
106 *
107 * Clear busy when aborted command finishes, not when abort is called.
108 *
109 * More debugging messages for aborts.
110 */
111
112/* Changes from version 1.3 to version 1.4:
113 *
114 * Enable automatic request of sense data on error (requires newer version
115 * of scsi.c to be useful).
116 *
117 * Fix PORT_OVERRIDE for 14F.
118 *
119 * Fix abort and reset to work properly (config.aborted wasn't cleared
120 * after it was tested, so after a command abort no further commands would
121 * work).
122 *
123 * Boot time test to enable SCSI bus reset (defaults to not allowing reset).
124 *
125 * Fix test for OGM busy -- the busy bit is in different places on the 24F.
126 *
127 * Release ICM slot by clearing first byte on 24F.
128 */
129
130#include <linux/module.h>
131#include <linux/blkdev.h>
132#include <linux/interrupt.h>
133#include <linux/stddef.h>
134#include <linux/string.h>
135#include <linux/kernel.h>
136#include <linux/ioport.h>
137#include <linux/proc_fs.h>
138#include <linux/spinlock.h>
139#include <linux/stat.h>
140#include <linux/bitops.h>
141
142#include <asm/io.h>
143#include <asm/system.h>
144#include <asm/dma.h>
145
146#define ULTRASTOR_PRIVATE /* Get the private stuff from ultrastor.h */
147#include "scsi.h"
148#include <scsi/scsi_host.h>
149#include "ultrastor.h"
150
151#define FALSE 0
152#define TRUE 1
153
154#ifndef ULTRASTOR_DEBUG
155#define ULTRASTOR_DEBUG (UD_ABORT|UD_CSIR|UD_RESET)
156#endif
157
158#define VERSION "1.12"
159
160#define PACKED __attribute__((packed))
161#define ALIGNED(x) __attribute__((aligned(x)))
162
163
164/* The 14F uses an array of 4-byte ints for its scatter/gather list.
165 The data can be unaligned, but need not be. It's easier to give
166 the list normal alignment since it doesn't need to fit into a
167 packed structure. */
168
169typedef struct {
170 u32 address;
171 u32 num_bytes;
172} ultrastor_sg_list;
173
174
175/* MailBox SCSI Command Packet. Basic command structure for communicating
176 with controller. */
177struct mscp {
178 unsigned char opcode: 3; /* type of command */
179 unsigned char xdir: 2; /* data transfer direction */
180 unsigned char dcn: 1; /* disable disconnect */
181 unsigned char ca: 1; /* use cache (if available) */
182 unsigned char sg: 1; /* scatter/gather operation */
183 unsigned char target_id: 3; /* target SCSI id */
184 unsigned char ch_no: 2; /* SCSI channel (always 0 for 14f) */
185 unsigned char lun: 3; /* logical unit number */
186 unsigned int transfer_data PACKED; /* transfer data pointer */
187 unsigned int transfer_data_length PACKED; /* length in bytes */
188 unsigned int command_link PACKED; /* for linking command chains */
189 unsigned char scsi_command_link_id; /* identifies command in chain */
190 unsigned char number_of_sg_list; /* (if sg is set) 8 bytes per list */
191 unsigned char length_of_sense_byte;
192 unsigned char length_of_scsi_cdbs; /* 6, 10, or 12 */
193 unsigned char scsi_cdbs[12]; /* SCSI commands */
194 unsigned char adapter_status; /* non-zero indicates HA error */
195 unsigned char target_status; /* non-zero indicates target error */
196 u32 sense_data PACKED;
197 /* The following fields are for software only. They are included in
198 the MSCP structure because they are associated with SCSI requests. */
199 void (*done)(Scsi_Cmnd *);
200 Scsi_Cmnd *SCint;
201 ultrastor_sg_list sglist[ULTRASTOR_24F_MAX_SG]; /* use larger size for 24F */
202};
203
204
205/* Port addresses (relative to the base address) */
206#define U14F_PRODUCT_ID(port) ((port) + 0x4)
207#define CONFIG(port) ((port) + 0x6)
208
209/* Port addresses relative to the doorbell base address. */
210#define LCL_DOORBELL_MASK(port) ((port) + 0x0)
211#define LCL_DOORBELL_INTR(port) ((port) + 0x1)
212#define SYS_DOORBELL_MASK(port) ((port) + 0x2)
213#define SYS_DOORBELL_INTR(port) ((port) + 0x3)
214
215
216/* Used to store configuration info read from config i/o registers. Most of
217 this is not used yet, but might as well save it.
218
219 This structure also holds port addresses that are not at the same offset
220 on the 14F and 24F.
221
222 This structure holds all data that must be duplicated to support multiple
223 adapters. */
224
225static struct ultrastor_config
226{
227 unsigned short port_address; /* base address of card */
228 unsigned short doorbell_address; /* base address of doorbell CSRs */
229 unsigned short ogm_address; /* base address of OGM */
230 unsigned short icm_address; /* base address of ICM */
231 const void *bios_segment;
232 unsigned char interrupt: 4;
233 unsigned char dma_channel: 3;
234 unsigned char bios_drive_number: 1;
235 unsigned char heads;
236 unsigned char sectors;
237 unsigned char ha_scsi_id: 3;
238 unsigned char subversion: 4;
239 unsigned char revision;
240 /* The slot number is used to distinguish the 24F (slot != 0) from
241 the 14F and 34F (slot == 0). */
242 unsigned char slot;
243
244#ifdef PRINT_U24F_VERSION
245 volatile int csir_done;
246#endif
247
248 /* A pool of MSCP structures for this adapter, and a bitmask of
249 busy structures. (If ULTRASTOR_14F_MAX_CMDS == 1, a 1 byte
250 busy flag is used instead.) */
251
252#if ULTRASTOR_MAX_CMDS == 1
253 unsigned char mscp_busy;
254#else
255 unsigned long mscp_free;
256#endif
257 volatile unsigned char aborted[ULTRASTOR_MAX_CMDS];
258 struct mscp mscp[ULTRASTOR_MAX_CMDS];
259} config = {0};
260
261/* Set this to 1 to reset the SCSI bus on error. */
262static int ultrastor_bus_reset;
263
264
265/* Allowed BIOS base addresses (NULL indicates reserved) */
266static const void *const bios_segment_table[8] = {
267 NULL, (void *)0xC4000, (void *)0xC8000, (void *)0xCC000,
268 (void *)0xD0000, (void *)0xD4000, (void *)0xD8000, (void *)0xDC000,
269};
270
271/* Allowed IRQs for 14f */
272static const unsigned char interrupt_table_14f[4] = { 15, 14, 11, 10 };
273
274/* Allowed DMA channels for 14f (0 indicates reserved) */
275static const unsigned char dma_channel_table_14f[4] = { 5, 6, 7, 0 };
276
277/* Head/sector mappings allowed by 14f */
278static const struct {
279 unsigned char heads;
280 unsigned char sectors;
281} mapping_table[4] = { { 16, 63 }, { 64, 32 }, { 64, 63 }, { 64, 32 } };
282
283#ifndef PORT_OVERRIDE
284/* ??? A probe of address 0x310 screws up NE2000 cards */
285static const unsigned short ultrastor_ports_14f[] = {
286 0x330, 0x340, /*0x310,*/ 0x230, 0x240, 0x210, 0x130, 0x140,
287};
288#endif
289
290static void ultrastor_interrupt(int, void *, struct pt_regs *);
291static irqreturn_t do_ultrastor_interrupt(int, void *, struct pt_regs *);
292static inline void build_sg_list(struct mscp *, Scsi_Cmnd *SCpnt);
293
294
295/* Always called with host lock held */
296
297static inline int find_and_clear_bit_16(unsigned long *field)
298{
299 int rv;
300
301 if (*field == 0) panic("No free mscp");
302 asm("xorl %0,%0\n0:\tbsfw %1,%w0\n\tbtr %0,%1\n\tjnc 0b"
303 : "=&r" (rv), "=m" (*field) : "1" (*field));
304 return rv;
305}
306
307/* This has been re-implemented with the help of Richard Earnshaw,
308 <rwe@pegasus.esprit.ec.org> and works with gcc-2.5.8 and gcc-2.6.0.
309 The instability noted by jfc below appears to be a bug in
310 gcc-2.5.x when compiling w/o optimization. --Caleb
311
312 This asm is fragile: it doesn't work without the casts and it may
313 not work without optimization. Maybe I should add a swap builtin
314 to gcc. --jfc */
315static inline unsigned char xchgb(unsigned char reg,
316 volatile unsigned char *mem)
317{
318 __asm__ ("xchgb %0,%1" : "=q" (reg), "=m" (*mem) : "0" (reg));
319 return reg;
320}
321
322#if ULTRASTOR_DEBUG & (UD_COMMAND | UD_ABORT)
323
324/* Always called with the host lock held */
325static void log_ultrastor_abort(struct ultrastor_config *config,
326 int command)
327{
328 static char fmt[80] = "abort %d (%x); MSCP free pool: %x;";
329 int i;
330
331 for (i = 0; i < ULTRASTOR_MAX_CMDS; i++)
332 {
333 fmt[20 + i*2] = ' ';
334 if (! (config->mscp_free & (1 << i)))
335 fmt[21 + i*2] = '0' + config->mscp[i].target_id;
336 else
337 fmt[21 + i*2] = '-';
338 }
339 fmt[20 + ULTRASTOR_MAX_CMDS * 2] = '\n';
340 fmt[21 + ULTRASTOR_MAX_CMDS * 2] = 0;
341 printk(fmt, command, &config->mscp[command], config->mscp_free);
342
343}
344#endif
345
Christoph Hellwigd0be4a7d2005-10-31 18:31:40 +0100346static int ultrastor_14f_detect(struct scsi_host_template * tpnt)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700347{
348 size_t i;
349 unsigned char in_byte, version_byte = 0;
350 struct config_1 {
351 unsigned char bios_segment: 3;
352 unsigned char removable_disks_as_fixed: 1;
353 unsigned char interrupt: 2;
354 unsigned char dma_channel: 2;
355 } config_1;
356 struct config_2 {
357 unsigned char ha_scsi_id: 3;
358 unsigned char mapping_mode: 2;
359 unsigned char bios_drive_number: 1;
360 unsigned char tfr_port: 2;
361 } config_2;
362
363#if (ULTRASTOR_DEBUG & UD_DETECT)
364 printk("US14F: detect: called\n");
365#endif
366
367 /* If a 24F has already been configured, don't look for a 14F. */
368 if (config.bios_segment)
369 return FALSE;
370
371#ifdef PORT_OVERRIDE
372 if(!request_region(PORT_OVERRIDE, 0xc, "ultrastor")) {
373 printk("Ultrastor I/O space already in use\n");
374 return FALSE;
375 };
376 config.port_address = PORT_OVERRIDE;
377#else
378 for (i = 0; i < ARRAY_SIZE(ultrastor_ports_14f); i++) {
379 if(!request_region(ultrastor_ports_14f[i], 0x0c, "ultrastor")) continue;
380 config.port_address = ultrastor_ports_14f[i];
381#endif
382
383#if (ULTRASTOR_DEBUG & UD_DETECT)
384 printk("US14F: detect: testing port address %03X\n", config.port_address);
385#endif
386
387 in_byte = inb(U14F_PRODUCT_ID(config.port_address));
388 if (in_byte != US14F_PRODUCT_ID_0) {
389#if (ULTRASTOR_DEBUG & UD_DETECT)
390# ifdef PORT_OVERRIDE
391 printk("US14F: detect: wrong product ID 0 - %02X\n", in_byte);
392# else
393 printk("US14F: detect: no adapter at port %03X\n", config.port_address);
394# endif
395#endif
396#ifdef PORT_OVERRIDE
397 goto out_release_port;
398#else
399 release_region(config.port_address, 0x0c);
400 continue;
401#endif
402 }
403 in_byte = inb(U14F_PRODUCT_ID(config.port_address) + 1);
404 /* Only upper nibble is significant for Product ID 1 */
405 if ((in_byte & 0xF0) != US14F_PRODUCT_ID_1) {
406#if (ULTRASTOR_DEBUG & UD_DETECT)
407# ifdef PORT_OVERRIDE
408 printk("US14F: detect: wrong product ID 1 - %02X\n", in_byte);
409# else
410 printk("US14F: detect: no adapter at port %03X\n", config.port_address);
411# endif
412#endif
413#ifdef PORT_OVERRIDE
414 goto out_release_port;
415#else
416 release_region(config.port_address, 0x0c);
417 continue;
418#endif
419 }
420 version_byte = in_byte;
421#ifndef PORT_OVERRIDE
422 break;
423 }
424 if (i == ARRAY_SIZE(ultrastor_ports_14f)) {
425# if (ULTRASTOR_DEBUG & UD_DETECT)
426 printk("US14F: detect: no port address found!\n");
427# endif
428 /* all ports probed already released - we can just go straight out */
429 return FALSE;
430 }
431#endif
432
433#if (ULTRASTOR_DEBUG & UD_DETECT)
434 printk("US14F: detect: adapter found at port address %03X\n",
435 config.port_address);
436#endif
437
438 /* Set local doorbell mask to disallow bus reset unless
439 ultrastor_bus_reset is true. */
440 outb(ultrastor_bus_reset ? 0xc2 : 0x82, LCL_DOORBELL_MASK(config.port_address));
441
442 /* All above tests passed, must be the right thing. Get some useful
443 info. */
444
445 /* Register the I/O space that we use */
446
447 *(char *)&config_1 = inb(CONFIG(config.port_address + 0));
448 *(char *)&config_2 = inb(CONFIG(config.port_address + 1));
449 config.bios_segment = bios_segment_table[config_1.bios_segment];
450 config.doorbell_address = config.port_address;
451 config.ogm_address = config.port_address + 0x8;
452 config.icm_address = config.port_address + 0xC;
453 config.interrupt = interrupt_table_14f[config_1.interrupt];
454 config.ha_scsi_id = config_2.ha_scsi_id;
455 config.heads = mapping_table[config_2.mapping_mode].heads;
456 config.sectors = mapping_table[config_2.mapping_mode].sectors;
457 config.bios_drive_number = config_2.bios_drive_number;
458 config.subversion = (version_byte & 0x0F);
459 if (config.subversion == U34F)
460 config.dma_channel = 0;
461 else
462 config.dma_channel = dma_channel_table_14f[config_1.dma_channel];
463
464 if (!config.bios_segment) {
465#if (ULTRASTOR_DEBUG & UD_DETECT)
466 printk("US14F: detect: not detected.\n");
467#endif
468 goto out_release_port;
469 }
470
471 /* Final consistency check, verify previous info. */
472 if (config.subversion != U34F)
473 if (!config.dma_channel || !(config_2.tfr_port & 0x2)) {
474#if (ULTRASTOR_DEBUG & UD_DETECT)
475 printk("US14F: detect: consistency check failed\n");
476#endif
477 goto out_release_port;
478 }
479
480 /* If we were TRULY paranoid, we could issue a host adapter inquiry
481 command here and verify the data returned. But frankly, I'm
482 exhausted! */
483
484 /* Finally! Now I'm satisfied... */
485#if (ULTRASTOR_DEBUG & UD_DETECT)
486 printk("US14F: detect: detect succeeded\n"
487 " Port address: %03X\n"
488 " BIOS segment: %05X\n"
489 " Interrupt: %u\n"
490 " DMA channel: %u\n"
491 " H/A SCSI ID: %u\n"
492 " Subversion: %u\n",
493 config.port_address, config.bios_segment, config.interrupt,
494 config.dma_channel, config.ha_scsi_id, config.subversion);
495#endif
496 tpnt->this_id = config.ha_scsi_id;
497 tpnt->unchecked_isa_dma = (config.subversion != U34F);
498
499#if ULTRASTOR_MAX_CMDS > 1
500 config.mscp_free = ~0;
501#endif
502
503 /*
504 * Brrr, &config.mscp[0].SCint->host) it is something magical....
505 * XXX and FIXME
506 */
507 if (request_irq(config.interrupt, do_ultrastor_interrupt, 0, "Ultrastor", &config.mscp[0].SCint->device->host)) {
508 printk("Unable to allocate IRQ%u for UltraStor controller.\n",
509 config.interrupt);
510 goto out_release_port;
511 }
512 if (config.dma_channel && request_dma(config.dma_channel,"Ultrastor")) {
513 printk("Unable to allocate DMA channel %u for UltraStor controller.\n",
514 config.dma_channel);
515 free_irq(config.interrupt, NULL);
516 goto out_release_port;
517 }
518 tpnt->sg_tablesize = ULTRASTOR_14F_MAX_SG;
519 printk("UltraStor driver version" VERSION ". Using %d SG lists.\n",
520 ULTRASTOR_14F_MAX_SG);
521
522 return TRUE;
523out_release_port:
524 release_region(config.port_address, 0x0c);
525 return FALSE;
526}
527
Christoph Hellwigd0be4a7d2005-10-31 18:31:40 +0100528static int ultrastor_24f_detect(struct scsi_host_template * tpnt)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700529{
530 int i;
531 struct Scsi_Host * shpnt = NULL;
532
533#if (ULTRASTOR_DEBUG & UD_DETECT)
534 printk("US24F: detect");
535#endif
536
537 /* probe each EISA slot at slot address C80 */
538 for (i = 1; i < 15; i++)
539 {
540 unsigned char config_1, config_2;
541 unsigned short addr = (i << 12) | ULTRASTOR_24F_PORT;
542
543 if (inb(addr) != US24F_PRODUCT_ID_0 &&
544 inb(addr+1) != US24F_PRODUCT_ID_1 &&
545 inb(addr+2) != US24F_PRODUCT_ID_2)
546 continue;
547
548 config.revision = inb(addr+3);
549 config.slot = i;
550 if (! (inb(addr+4) & 1))
551 {
552#if (ULTRASTOR_DEBUG & UD_DETECT)
553 printk("U24F: found disabled card in slot %u\n", i);
554#endif
555 continue;
556 }
557#if (ULTRASTOR_DEBUG & UD_DETECT)
558 printk("U24F: found card in slot %u\n", i);
559#endif
560 config_1 = inb(addr + 5);
561 config.bios_segment = bios_segment_table[config_1 & 7];
562 switch(config_1 >> 4)
563 {
564 case 1:
565 config.interrupt = 15;
566 break;
567 case 2:
568 config.interrupt = 14;
569 break;
570 case 4:
571 config.interrupt = 11;
572 break;
573 case 8:
574 config.interrupt = 10;
575 break;
576 default:
577 printk("U24F: invalid IRQ\n");
578 return FALSE;
579 }
580
581 /* BIOS addr set */
582 /* base port set */
583 config.port_address = addr;
584 config.doorbell_address = addr + 12;
585 config.ogm_address = addr + 0x17;
586 config.icm_address = addr + 0x1C;
587 config_2 = inb(addr + 7);
588 config.ha_scsi_id = config_2 & 7;
589 config.heads = mapping_table[(config_2 >> 3) & 3].heads;
590 config.sectors = mapping_table[(config_2 >> 3) & 3].sectors;
591#if (ULTRASTOR_DEBUG & UD_DETECT)
592 printk("US24F: detect: detect succeeded\n"
593 " Port address: %03X\n"
594 " BIOS segment: %05X\n"
595 " Interrupt: %u\n"
596 " H/A SCSI ID: %u\n",
597 config.port_address, config.bios_segment,
598 config.interrupt, config.ha_scsi_id);
599#endif
600 tpnt->this_id = config.ha_scsi_id;
601 tpnt->unchecked_isa_dma = 0;
602 tpnt->sg_tablesize = ULTRASTOR_24F_MAX_SG;
603
604 shpnt = scsi_register(tpnt, 0);
605 if (!shpnt) {
606 printk(KERN_WARNING "(ultrastor:) Could not register scsi device. Aborting registration.\n");
607 free_irq(config.interrupt, do_ultrastor_interrupt);
608 return FALSE;
609 }
610
611 if (request_irq(config.interrupt, do_ultrastor_interrupt, 0, "Ultrastor", shpnt))
612 {
613 printk("Unable to allocate IRQ%u for UltraStor controller.\n",
614 config.interrupt);
615 return FALSE;
616 }
617
618 shpnt->irq = config.interrupt;
619 shpnt->dma_channel = config.dma_channel;
620 shpnt->io_port = config.port_address;
621
622#if ULTRASTOR_MAX_CMDS > 1
623 config.mscp_free = ~0;
624#endif
625 /* Mark ICM and OGM free */
626 outb(0, addr + 0x16);
627 outb(0, addr + 0x1B);
628
629 /* Set local doorbell mask to disallow bus reset unless
630 ultrastor_bus_reset is true. */
631 outb(ultrastor_bus_reset ? 0xc2 : 0x82, LCL_DOORBELL_MASK(addr+12));
632 outb(0x02, SYS_DOORBELL_MASK(addr+12));
633 printk("UltraStor driver version " VERSION ". Using %d SG lists.\n",
634 tpnt->sg_tablesize);
635 return TRUE;
636 }
637 return FALSE;
638}
639
Christoph Hellwigd0be4a7d2005-10-31 18:31:40 +0100640static int ultrastor_detect(struct scsi_host_template * tpnt)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700641{
642 tpnt->proc_name = "ultrastor";
643 return ultrastor_14f_detect(tpnt) || ultrastor_24f_detect(tpnt);
644}
645
646static int ultrastor_release(struct Scsi_Host *shost)
647{
648 if (shost->irq)
649 free_irq(shost->irq, NULL);
650 if (shost->dma_channel != 0xff)
651 free_dma(shost->dma_channel);
652 if (shost->io_port && shost->n_io_port)
653 release_region(shost->io_port, shost->n_io_port);
654 scsi_unregister(shost);
655 return 0;
656}
657
658static const char *ultrastor_info(struct Scsi_Host * shpnt)
659{
660 static char buf[64];
661
662 if (config.slot)
663 sprintf(buf, "UltraStor 24F SCSI @ Slot %u IRQ%u",
664 config.slot, config.interrupt);
665 else if (config.subversion)
666 sprintf(buf, "UltraStor 34F SCSI @ Port %03X BIOS %05X IRQ%u",
667 config.port_address, (int)config.bios_segment,
668 config.interrupt);
669 else
670 sprintf(buf, "UltraStor 14F SCSI @ Port %03X BIOS %05X IRQ%u DMA%u",
671 config.port_address, (int)config.bios_segment,
672 config.interrupt, config.dma_channel);
673 return buf;
674}
675
676static inline void build_sg_list(struct mscp *mscp, Scsi_Cmnd *SCpnt)
677{
678 struct scatterlist *sl;
679 long transfer_length = 0;
680 int i, max;
681
682 sl = (struct scatterlist *) SCpnt->request_buffer;
683 max = SCpnt->use_sg;
684 for (i = 0; i < max; i++) {
685 mscp->sglist[i].address = isa_page_to_bus(sl[i].page) + sl[i].offset;
686 mscp->sglist[i].num_bytes = sl[i].length;
687 transfer_length += sl[i].length;
688 }
689 mscp->number_of_sg_list = max;
690 mscp->transfer_data = isa_virt_to_bus(mscp->sglist);
691 /* ??? May not be necessary. Docs are unclear as to whether transfer
692 length field is ignored or whether it should be set to the total
693 number of bytes of the transfer. */
694 mscp->transfer_data_length = transfer_length;
695}
696
697static int ultrastor_queuecommand(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
698{
699 struct mscp *my_mscp;
700#if ULTRASTOR_MAX_CMDS > 1
701 int mscp_index;
702#endif
703 unsigned int status;
704
705 /* Next test is for debugging; "can't happen" */
706 if ((config.mscp_free & ((1U << ULTRASTOR_MAX_CMDS) - 1)) == 0)
707 panic("ultrastor_queuecommand: no free MSCP\n");
708 mscp_index = find_and_clear_bit_16(&config.mscp_free);
709
710 /* Has the command been aborted? */
711 if (xchgb(0xff, &config.aborted[mscp_index]) != 0)
712 {
713 status = DID_ABORT << 16;
714 goto aborted;
715 }
716
717 my_mscp = &config.mscp[mscp_index];
718
719 *(unsigned char *)my_mscp = OP_SCSI | (DTD_SCSI << 3);
720
721 /* Tape drives don't work properly if the cache is used. The SCSI
722 READ command for a tape doesn't have a block offset, and the adapter
723 incorrectly assumes that all reads from the tape read the same
724 blocks. Results will depend on read buffer size and other disk
725 activity.
726
727 ??? Which other device types should never use the cache? */
728 my_mscp->ca = SCpnt->device->type != TYPE_TAPE;
729 my_mscp->target_id = SCpnt->device->id;
730 my_mscp->ch_no = 0;
731 my_mscp->lun = SCpnt->device->lun;
732 if (SCpnt->use_sg) {
733 /* Set scatter/gather flag in SCSI command packet */
734 my_mscp->sg = TRUE;
735 build_sg_list(my_mscp, SCpnt);
736 } else {
737 /* Unset scatter/gather flag in SCSI command packet */
738 my_mscp->sg = FALSE;
739 my_mscp->transfer_data = isa_virt_to_bus(SCpnt->request_buffer);
740 my_mscp->transfer_data_length = SCpnt->request_bufflen;
741 }
742 my_mscp->command_link = 0; /*???*/
743 my_mscp->scsi_command_link_id = 0; /*???*/
744 my_mscp->length_of_sense_byte = sizeof SCpnt->sense_buffer;
745 my_mscp->length_of_scsi_cdbs = SCpnt->cmd_len;
746 memcpy(my_mscp->scsi_cdbs, SCpnt->cmnd, my_mscp->length_of_scsi_cdbs);
747 my_mscp->adapter_status = 0;
748 my_mscp->target_status = 0;
749 my_mscp->sense_data = isa_virt_to_bus(&SCpnt->sense_buffer);
750 my_mscp->done = done;
751 my_mscp->SCint = SCpnt;
752 SCpnt->host_scribble = (unsigned char *)my_mscp;
753
754 /* Find free OGM slot. On 24F, look for OGM status byte == 0.
755 On 14F and 34F, wait for local interrupt pending flag to clear.
756
757 FIXME: now we are using new_eh we should punt here and let the
758 midlayer sort it out */
759
760retry:
761 if (config.slot)
762 while (inb(config.ogm_address - 1) != 0 && config.aborted[mscp_index] == 0xff)
763 barrier();
764
765 /* else??? */
766
767 while ((inb(LCL_DOORBELL_INTR(config.doorbell_address)) & (config.slot ? 2 : 1)) && config.aborted[mscp_index] == 0xff)
768 barrier();
769
770 /* To avoid race conditions, keep the code to write to the adapter
771 atomic. This simplifies the abort code. Right now the
772 scsi mid layer has the host_lock already held
773 */
774
775 if (inb(LCL_DOORBELL_INTR(config.doorbell_address)) & (config.slot ? 2 : 1))
776 goto retry;
777
778 status = xchgb(0, &config.aborted[mscp_index]);
779 if (status != 0xff) {
780
781#if ULTRASTOR_DEBUG & (UD_COMMAND | UD_ABORT)
782 printk("USx4F: queuecommand: aborted\n");
783#if ULTRASTOR_MAX_CMDS > 1
784 log_ultrastor_abort(&config, mscp_index);
785#endif
786#endif
787 status <<= 16;
788
789 aborted:
790 set_bit(mscp_index, &config.mscp_free);
791 /* If the driver queues commands, call the done proc here. Otherwise
792 return an error. */
793#if ULTRASTOR_MAX_CMDS > 1
794 SCpnt->result = status;
795 done(SCpnt);
796 return 0;
797#else
798 return status;
799#endif
800 }
801
802 /* Store pointer in OGM address bytes */
803 outl(isa_virt_to_bus(my_mscp), config.ogm_address);
804
805 /* Issue OGM interrupt */
806 if (config.slot) {
807 /* Write OGM command register on 24F */
808 outb(1, config.ogm_address - 1);
809 outb(0x2, LCL_DOORBELL_INTR(config.doorbell_address));
810 } else {
811 outb(0x1, LCL_DOORBELL_INTR(config.doorbell_address));
812 }
813
814#if (ULTRASTOR_DEBUG & UD_COMMAND)
815 printk("USx4F: queuecommand: returning\n");
816#endif
817
818 return 0;
819}
820
821/* This code must deal with 2 cases:
822
823 1. The command has not been written to the OGM. In this case, set
824 the abort flag and return.
825
826 2. The command has been written to the OGM and is stuck somewhere in
827 the adapter.
828
829 2a. On a 24F, ask the adapter to abort the command. It will interrupt
830 when it does.
831
832 2b. Call the command's done procedure.
833
834 */
835
836static int ultrastor_abort(Scsi_Cmnd *SCpnt)
837{
838#if ULTRASTOR_DEBUG & UD_ABORT
839 char out[108];
840 unsigned char icm_status = 0, ogm_status = 0;
841 unsigned int icm_addr = 0, ogm_addr = 0;
842#endif
843 unsigned int mscp_index;
844 unsigned char old_aborted;
845 unsigned long flags;
846 void (*done)(Scsi_Cmnd *);
847 struct Scsi_Host *host = SCpnt->device->host;
848
849 if(config.slot)
850 return FAILED; /* Do not attempt an abort for the 24f */
851
852 /* Simple consistency checking */
853 if(!SCpnt->host_scribble)
854 return FAILED;
855
856 mscp_index = ((struct mscp *)SCpnt->host_scribble) - config.mscp;
857 if (mscp_index >= ULTRASTOR_MAX_CMDS)
858 panic("Ux4F aborting invalid MSCP");
859
860#if ULTRASTOR_DEBUG & UD_ABORT
861 if (config.slot)
862 {
863 int port0 = (config.slot << 12) | 0xc80;
864 int i;
865 unsigned long flags;
866
867 spin_lock_irqsave(host->host_lock, flags);
868 strcpy(out, "OGM %d:%x ICM %d:%x ports: ");
869 for (i = 0; i < 16; i++)
870 {
871 unsigned char p = inb(port0 + i);
872 out[28 + i * 3] = "0123456789abcdef"[p >> 4];
873 out[29 + i * 3] = "0123456789abcdef"[p & 15];
874 out[30 + i * 3] = ' ';
875 }
876 out[28 + i * 3] = '\n';
877 out[29 + i * 3] = 0;
878 ogm_status = inb(port0 + 22);
879 ogm_addr = (unsigned int)isa_bus_to_virt(inl(port0 + 23));
880 icm_status = inb(port0 + 27);
881 icm_addr = (unsigned int)isa_bus_to_virt(inl(port0 + 28));
Jeff Garzik 8fa728a2005-05-28 07:54:40 -0400882 spin_unlock_irqrestore(host->host_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700883 }
884
885 /* First check to see if an interrupt is pending. I suspect the SiS
886 chipset loses interrupts. (I also suspect is mangles data, but
887 one bug at a time... */
888 if (config.slot ? inb(config.icm_address - 1) == 2 :
889 (inb(SYS_DOORBELL_INTR(config.doorbell_address)) & 1))
890 {
891 printk("Ux4F: abort while completed command pending\n");
892
893 spin_lock_irqsave(host->host_lock, flags);
894 /* FIXME: Ewww... need to think about passing host around properly */
895 ultrastor_interrupt(0, NULL, NULL);
896 spin_unlock_irqrestore(host->host_lock, flags);
897 return SUCCESS;
898 }
899#endif
900
901 old_aborted = xchgb(DID_ABORT, &config.aborted[mscp_index]);
902
903 /* aborted == 0xff is the signal that queuecommand has not yet sent
904 the command. It will notice the new abort flag and fail. */
905 if (old_aborted == 0xff)
906 return SUCCESS;
907
908 /* On 24F, send an abort MSCP request. The adapter will interrupt
909 and the interrupt handler will call done. */
910 if (config.slot && inb(config.ogm_address - 1) == 0)
911 {
912 unsigned long flags;
913
914 spin_lock_irqsave(host->host_lock, flags);
915 outl(isa_virt_to_bus(&config.mscp[mscp_index]), config.ogm_address);
916 udelay(8);
917 outb(0x80, config.ogm_address - 1);
918 outb(0x2, LCL_DOORBELL_INTR(config.doorbell_address));
919#if ULTRASTOR_DEBUG & UD_ABORT
920 log_ultrastor_abort(&config, mscp_index);
921 printk(out, ogm_status, ogm_addr, icm_status, icm_addr);
922#endif
923 spin_unlock_irqrestore(host->host_lock, flags);
924 /* FIXME: add a wait for the abort to complete */
925 return SUCCESS;
926 }
927
928#if ULTRASTOR_DEBUG & UD_ABORT
929 log_ultrastor_abort(&config, mscp_index);
930#endif
931
932 /* Can't request a graceful abort. Either this is not a 24F or
933 the OGM is busy. Don't free the command -- the adapter might
934 still be using it. Setting SCint = 0 causes the interrupt
935 handler to ignore the command. */
936
937 /* FIXME - devices that implement soft resets will still be running
938 the command after a bus reset. We would probably rather leave
939 the command in the queue. The upper level code will automatically
940 leave the command in the active state instead of requeueing it. ERY */
941
942#if ULTRASTOR_DEBUG & UD_ABORT
943 if (config.mscp[mscp_index].SCint != SCpnt)
944 printk("abort: command mismatch, %p != %p\n",
945 config.mscp[mscp_index].SCint, SCpnt);
946#endif
947 if (config.mscp[mscp_index].SCint == 0)
akpm@osdl.org69aa3f72005-05-01 08:58:35 -0700948 return FAILED;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700949
950 if (config.mscp[mscp_index].SCint != SCpnt) panic("Bad abort");
951 config.mscp[mscp_index].SCint = NULL;
952 done = config.mscp[mscp_index].done;
953 config.mscp[mscp_index].done = NULL;
954 SCpnt->result = DID_ABORT << 16;
955
956 /* Take the host lock to guard against scsi layer re-entry */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700957 done(SCpnt);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700958
959 /* Need to set a timeout here in case command never completes. */
960 return SUCCESS;
961}
962
963static int ultrastor_host_reset(Scsi_Cmnd * SCpnt)
964{
965 unsigned long flags;
966 int i;
967 struct Scsi_Host *host = SCpnt->device->host;
968
969#if (ULTRASTOR_DEBUG & UD_RESET)
970 printk("US14F: reset: called\n");
971#endif
972
973 if(config.slot)
974 return FAILED;
975
976 spin_lock_irqsave(host->host_lock, flags);
977 /* Reset the adapter and SCSI bus. The SCSI bus reset can be
978 inhibited by clearing ultrastor_bus_reset before probe. */
979 outb(0xc0, LCL_DOORBELL_INTR(config.doorbell_address));
980 if (config.slot)
981 {
982 outb(0, config.ogm_address - 1);
983 outb(0, config.icm_address - 1);
984 }
985
986#if ULTRASTOR_MAX_CMDS == 1
987 if (config.mscp_busy && config.mscp->done && config.mscp->SCint)
988 {
989 config.mscp->SCint->result = DID_RESET << 16;
990 config.mscp->done(config.mscp->SCint);
991 }
992 config.mscp->SCint = 0;
993#else
994 for (i = 0; i < ULTRASTOR_MAX_CMDS; i++)
995 {
996 if (! (config.mscp_free & (1 << i)) &&
997 config.mscp[i].done && config.mscp[i].SCint)
998 {
999 config.mscp[i].SCint->result = DID_RESET << 16;
1000 config.mscp[i].done(config.mscp[i].SCint);
1001 config.mscp[i].done = NULL;
1002 }
1003 config.mscp[i].SCint = NULL;
1004 }
1005#endif
1006
1007 /* FIXME - if the device implements soft resets, then the command
1008 will still be running. ERY
1009
1010 Even bigger deal with new_eh!
1011 */
1012
1013 memset((unsigned char *)config.aborted, 0, sizeof config.aborted);
1014#if ULTRASTOR_MAX_CMDS == 1
1015 config.mscp_busy = 0;
1016#else
1017 config.mscp_free = ~0;
1018#endif
1019
1020 spin_unlock_irqrestore(host->host_lock, flags);
2bc474c2005-04-10 22:19:25 -05001021 return SUCCESS;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001022
1023}
1024
1025int ultrastor_biosparam(struct scsi_device *sdev, struct block_device *bdev,
1026 sector_t capacity, int * dkinfo)
1027{
1028 int size = capacity;
1029 unsigned int s = config.heads * config.sectors;
1030
1031 dkinfo[0] = config.heads;
1032 dkinfo[1] = config.sectors;
1033 dkinfo[2] = size / s; /* Ignore partial cylinders */
1034#if 0
1035 if (dkinfo[2] > 1024)
1036 dkinfo[2] = 1024;
1037#endif
1038 return 0;
1039}
1040
1041static void ultrastor_interrupt(int irq, void *dev_id, struct pt_regs *regs)
1042{
1043 unsigned int status;
1044#if ULTRASTOR_MAX_CMDS > 1
1045 unsigned int mscp_index;
1046#endif
1047 struct mscp *mscp;
1048 void (*done)(Scsi_Cmnd *);
1049 Scsi_Cmnd *SCtmp;
1050
1051#if ULTRASTOR_MAX_CMDS == 1
1052 mscp = &config.mscp[0];
1053#else
1054 mscp = (struct mscp *)isa_bus_to_virt(inl(config.icm_address));
1055 mscp_index = mscp - config.mscp;
1056 if (mscp_index >= ULTRASTOR_MAX_CMDS) {
1057 printk("Ux4F interrupt: bad MSCP address %x\n", (unsigned int) mscp);
1058 /* A command has been lost. Reset and report an error
1059 for all commands. */
1060 ultrastor_host_reset(dev_id);
1061 return;
1062 }
1063#endif
1064
1065 /* Clean ICM slot (set ICMINT bit to 0) */
1066 if (config.slot) {
1067 unsigned char icm_status = inb(config.icm_address - 1);
1068#if ULTRASTOR_DEBUG & (UD_INTERRUPT|UD_ERROR|UD_ABORT)
1069 if (icm_status != 1 && icm_status != 2)
1070 printk("US24F: ICM status %x for MSCP %d (%x)\n", icm_status,
1071 mscp_index, (unsigned int) mscp);
1072#endif
1073 /* The manual says clear interrupt then write 0 to ICM status.
1074 This seems backwards, but I'll do it anyway. --jfc */
1075 outb(2, SYS_DOORBELL_INTR(config.doorbell_address));
1076 outb(0, config.icm_address - 1);
1077 if (icm_status == 4) {
1078 printk("UltraStor abort command failed\n");
1079 return;
1080 }
1081 if (icm_status == 3) {
1082 void (*done)(Scsi_Cmnd *) = mscp->done;
1083 if (done) {
1084 mscp->done = NULL;
1085 mscp->SCint->result = DID_ABORT << 16;
1086 done(mscp->SCint);
1087 }
1088 return;
1089 }
1090 } else {
1091 outb(1, SYS_DOORBELL_INTR(config.doorbell_address));
1092 }
1093
1094 SCtmp = mscp->SCint;
1095 mscp->SCint = NULL;
1096
1097 if (SCtmp == 0)
1098 {
1099#if ULTRASTOR_DEBUG & (UD_ABORT|UD_INTERRUPT)
1100 printk("MSCP %d (%x): no command\n", mscp_index, (unsigned int) mscp);
1101#endif
1102#if ULTRASTOR_MAX_CMDS == 1
1103 config.mscp_busy = FALSE;
1104#else
1105 set_bit(mscp_index, &config.mscp_free);
1106#endif
1107 config.aborted[mscp_index] = 0;
1108 return;
1109 }
1110
1111 /* Save done locally and zero before calling. This is needed as
1112 once we call done, we may get another command queued before this
1113 interrupt service routine can return. */
1114 done = mscp->done;
1115 mscp->done = NULL;
1116
1117 /* Let the higher levels know that we're done */
1118 switch (mscp->adapter_status)
1119 {
1120 case 0:
1121 status = DID_OK << 16;
1122 break;
1123 case 0x01: /* invalid command */
1124 case 0x02: /* invalid parameters */
1125 case 0x03: /* invalid data list */
1126 default:
1127 status = DID_ERROR << 16;
1128 break;
1129 case 0x84: /* SCSI bus abort */
1130 status = DID_ABORT << 16;
1131 break;
1132 case 0x91:
1133 status = DID_TIME_OUT << 16;
1134 break;
1135 }
1136
1137 SCtmp->result = status | mscp->target_status;
1138
1139 SCtmp->host_scribble = NULL;
1140
1141 /* Free up mscp block for next command */
1142#if ULTRASTOR_MAX_CMDS == 1
1143 config.mscp_busy = FALSE;
1144#else
1145 set_bit(mscp_index, &config.mscp_free);
1146#endif
1147
1148#if ULTRASTOR_DEBUG & (UD_ABORT|UD_INTERRUPT)
1149 if (config.aborted[mscp_index])
1150 printk("Ux4 interrupt: MSCP %d (%x) aborted = %d\n",
1151 mscp_index, (unsigned int) mscp, config.aborted[mscp_index]);
1152#endif
1153 config.aborted[mscp_index] = 0;
1154
1155 if (done)
1156 done(SCtmp);
1157 else
1158 printk("US14F: interrupt: unexpected interrupt\n");
1159
1160 if (config.slot ? inb(config.icm_address - 1) :
1161 (inb(SYS_DOORBELL_INTR(config.doorbell_address)) & 1))
1162#if (ULTRASTOR_DEBUG & UD_MULTI_CMD)
1163 printk("Ux4F: multiple commands completed\n");
1164#else
1165 ;
1166#endif
1167
1168#if (ULTRASTOR_DEBUG & UD_INTERRUPT)
1169 printk("USx4F: interrupt: returning\n");
1170#endif
1171}
1172
1173static irqreturn_t do_ultrastor_interrupt(int irq, void *dev_id,
1174 struct pt_regs *regs)
1175{
1176 unsigned long flags;
1177 struct Scsi_Host *dev = dev_id;
1178
1179 spin_lock_irqsave(dev->host_lock, flags);
1180 ultrastor_interrupt(irq, dev_id, regs);
1181 spin_unlock_irqrestore(dev->host_lock, flags);
1182 return IRQ_HANDLED;
1183}
1184
1185MODULE_LICENSE("GPL");
1186
Christoph Hellwigd0be4a7d2005-10-31 18:31:40 +01001187static struct scsi_host_template driver_template = {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001188 .name = "UltraStor 14F/24F/34F",
1189 .detect = ultrastor_detect,
1190 .release = ultrastor_release,
1191 .info = ultrastor_info,
1192 .queuecommand = ultrastor_queuecommand,
1193 .eh_abort_handler = ultrastor_abort,
1194 .eh_host_reset_handler = ultrastor_host_reset,
1195 .bios_param = ultrastor_biosparam,
1196 .can_queue = ULTRASTOR_MAX_CMDS,
1197 .sg_tablesize = ULTRASTOR_14F_MAX_SG,
1198 .cmd_per_lun = ULTRASTOR_MAX_CMDS_PER_LUN,
1199 .unchecked_isa_dma = 1,
1200 .use_clustering = ENABLE_CLUSTERING,
1201};
1202#include "scsi_module.c"