blob: a9a4edfa23c8cb90ced9495e02d5268acf2b5931 [file] [log] [blame]
Chaithrika U Sdbb7a952008-12-09 22:21:25 -08001/*
2 * drivers/net/phy/et1011c.c
3 *
4 * Driver for LSI ET1011C PHYs
5 *
6 * Author: Chaithrika U S
7 *
8 * Copyright (c) 2008 Texas Instruments
9 *
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
14 *
15 */
16#include <linux/kernel.h>
17#include <linux/string.h>
18#include <linux/errno.h>
19#include <linux/unistd.h>
Chaithrika U Sdbb7a952008-12-09 22:21:25 -080020#include <linux/interrupt.h>
21#include <linux/init.h>
22#include <linux/delay.h>
23#include <linux/netdevice.h>
24#include <linux/etherdevice.h>
25#include <linux/skbuff.h>
26#include <linux/spinlock.h>
27#include <linux/mm.h>
28#include <linux/module.h>
29#include <linux/mii.h>
30#include <linux/ethtool.h>
31#include <linux/phy.h>
32#include <linux/io.h>
33#include <linux/uaccess.h>
34#include <asm/irq.h>
35
36#define ET1011C_STATUS_REG (0x1A)
37#define ET1011C_CONFIG_REG (0x16)
38#define ET1011C_SPEED_MASK (0x0300)
39#define ET1011C_GIGABIT_SPEED (0x0200)
40#define ET1011C_TX_FIFO_MASK (0x3000)
41#define ET1011C_TX_FIFO_DEPTH_8 (0x0000)
42#define ET1011C_TX_FIFO_DEPTH_16 (0x1000)
43#define ET1011C_INTERFACE_MASK (0x0007)
44#define ET1011C_GMII_INTERFACE (0x0002)
45#define ET1011C_SYS_CLK_EN (0x01 << 4)
46
47
48MODULE_DESCRIPTION("LSI ET1011C PHY driver");
49MODULE_AUTHOR("Chaithrika U S");
50MODULE_LICENSE("GPL");
51
52static int et1011c_config_aneg(struct phy_device *phydev)
53{
54 int ctl = 0;
55 ctl = phy_read(phydev, MII_BMCR);
56 if (ctl < 0)
57 return ctl;
58 ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 |
59 BMCR_ANENABLE);
60 /* First clear the PHY */
61 phy_write(phydev, MII_BMCR, ctl | BMCR_RESET);
62
63 return genphy_config_aneg(phydev);
64}
65
66static int et1011c_read_status(struct phy_device *phydev)
67{
68 int ret;
69 u32 val;
70 static int speed;
71 ret = genphy_read_status(phydev);
72
73 if (speed != phydev->speed) {
74 speed = phydev->speed;
75 val = phy_read(phydev, ET1011C_STATUS_REG);
76 if ((val & ET1011C_SPEED_MASK) ==
77 ET1011C_GIGABIT_SPEED) {
78 val = phy_read(phydev, ET1011C_CONFIG_REG);
79 val &= ~ET1011C_TX_FIFO_MASK;
80 phy_write(phydev, ET1011C_CONFIG_REG, val\
81 | ET1011C_GMII_INTERFACE\
82 | ET1011C_SYS_CLK_EN\
83 | ET1011C_TX_FIFO_DEPTH_16);
84
85 }
86 }
87 return ret;
88}
89
Johan Hovold116dffa2014-11-11 19:45:58 +010090static struct phy_driver et1011c_driver[] = { {
Chaithrika U Sdbb7a952008-12-09 22:21:25 -080091 .phy_id = 0x0282f014,
92 .name = "ET1011C",
93 .phy_id_mask = 0xfffffff0,
94 .features = (PHY_BASIC_FEATURES | SUPPORTED_1000baseT_Full),
95 .flags = PHY_POLL,
96 .config_aneg = et1011c_config_aneg,
97 .read_status = et1011c_read_status,
Johan Hovold116dffa2014-11-11 19:45:58 +010098} };
Chaithrika U Sdbb7a952008-12-09 22:21:25 -080099
Johan Hovold116dffa2014-11-11 19:45:58 +0100100module_phy_driver(et1011c_driver);
David Woodhouse4e4f10f2010-04-02 01:05:56 +0000101
Uwe Kleine-Königcf93c942010-10-03 23:43:32 +0000102static struct mdio_device_id __maybe_unused et1011c_tbl[] = {
David Woodhouse4e4f10f2010-04-02 01:05:56 +0000103 { 0x0282f014, 0xfffffff0 },
104 { }
105};
106
107MODULE_DEVICE_TABLE(mdio, et1011c_tbl);