blob: a3fa7f4f1fb4d8ca142e2a22d4081c8494c37cab [file] [log] [blame]
David Brownella30d46c2008-10-20 23:46:28 +02001/*
2 * twl4030-irq.c - TWL4030/TPS659x0 irq support
3 *
4 * Copyright (C) 2005-2006 Texas Instruments, Inc.
5 *
6 * Modifications to defer interrupt handling to a kernel thread:
7 * Copyright (C) 2006 MontaVista Software, Inc.
8 *
9 * Based on tlv320aic23.c:
10 * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
11 *
12 * Code cleanup and modifications to IRQ handler.
13 * by syed khasim <x0khasim@ti.com>
14 *
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or
18 * (at your option) any later version.
19 *
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
24 *
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, write to the Free Software
27 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
28 */
29
Benoit Cousson78518ff2012-02-29 19:40:31 +010030#include <linux/export.h>
David Brownella30d46c2008-10-20 23:46:28 +020031#include <linux/interrupt.h>
32#include <linux/irq.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090033#include <linux/slab.h>
Benoit Cousson78518ff2012-02-29 19:40:31 +010034#include <linux/of.h>
35#include <linux/irqdomain.h>
Santosh Shilimkarb07682b2009-12-13 20:05:51 +010036#include <linux/i2c/twl.h>
David Brownella30d46c2008-10-20 23:46:28 +020037
G, Manjunath Kondaiahb0b4a7c2010-10-19 11:02:48 +020038#include "twl-core.h"
David Brownella30d46c2008-10-20 23:46:28 +020039
40/*
41 * TWL4030 IRQ handling has two stages in hardware, and thus in software.
42 * The Primary Interrupt Handler (PIH) stage exposes status bits saying
43 * which Secondary Interrupt Handler (SIH) stage is raising an interrupt.
44 * SIH modules are more traditional IRQ components, which support per-IRQ
45 * enable/disable and trigger controls; they do most of the work.
46 *
47 * These chips are designed to support IRQ handling from two different
48 * I2C masters. Each has a dedicated IRQ line, and dedicated IRQ status
49 * and mask registers in the PIH and SIH modules.
50 *
51 * We set up IRQs starting at a platform-specified base, always starting
52 * with PIH and the SIH for PWR_INT and then usually adding GPIO:
53 * base + 0 .. base + 7 PIH
54 * base + 8 .. base + 15 SIH for PWR_INT
55 * base + 16 .. base + 33 SIH for GPIO
56 */
Benoit Cousson78518ff2012-02-29 19:40:31 +010057#define TWL4030_CORE_NR_IRQS 8
58#define TWL4030_PWR_NR_IRQS 8
David Brownella30d46c2008-10-20 23:46:28 +020059
60/* PIH register offsets */
61#define REG_PIH_ISR_P1 0x01
62#define REG_PIH_ISR_P2 0x02
63#define REG_PIH_SIR 0x03 /* for testing */
64
David Brownella30d46c2008-10-20 23:46:28 +020065/* Linux could (eventually) use either IRQ line */
66static int irq_line;
67
68struct sih {
69 char name[8];
70 u8 module; /* module id */
71 u8 control_offset; /* for SIH_CTRL */
72 bool set_cor;
73
74 u8 bits; /* valid in isr/imr */
75 u8 bytes_ixr; /* bytelen of ISR/IMR/SIR */
76
77 u8 edr_offset;
78 u8 bytes_edr; /* bytelen of EDR */
79
Ilkka Koskinen1920a612009-11-10 17:26:15 +020080 u8 irq_lines; /* number of supported irq lines */
81
David Brownella30d46c2008-10-20 23:46:28 +020082 /* SIR ignored -- set interrupt, for testing only */
Thomas Gleixner35a27e82010-10-01 16:35:59 +020083 struct sih_irq_data {
David Brownella30d46c2008-10-20 23:46:28 +020084 u8 isr_offset;
85 u8 imr_offset;
86 } mask[2];
87 /* + 2 bytes padding */
88};
89
Ilkka Koskinen1920a612009-11-10 17:26:15 +020090static const struct sih *sih_modules;
91static int nr_sih_modules;
92
David Brownella30d46c2008-10-20 23:46:28 +020093#define SIH_INITIALIZER(modname, nbits) \
94 .module = TWL4030_MODULE_ ## modname, \
95 .control_offset = TWL4030_ ## modname ## _SIH_CTRL, \
96 .bits = nbits, \
97 .bytes_ixr = DIV_ROUND_UP(nbits, 8), \
98 .edr_offset = TWL4030_ ## modname ## _EDR, \
99 .bytes_edr = DIV_ROUND_UP((2*(nbits)), 8), \
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200100 .irq_lines = 2, \
David Brownella30d46c2008-10-20 23:46:28 +0200101 .mask = { { \
102 .isr_offset = TWL4030_ ## modname ## _ISR1, \
103 .imr_offset = TWL4030_ ## modname ## _IMR1, \
104 }, \
105 { \
106 .isr_offset = TWL4030_ ## modname ## _ISR2, \
107 .imr_offset = TWL4030_ ## modname ## _IMR2, \
108 }, },
109
110/* register naming policies are inconsistent ... */
111#define TWL4030_INT_PWR_EDR TWL4030_INT_PWR_EDR1
112#define TWL4030_MODULE_KEYPAD_KEYP TWL4030_MODULE_KEYPAD
113#define TWL4030_MODULE_INT_PWR TWL4030_MODULE_INT
114
115
Felipe Contrerascbcde052012-02-01 03:02:48 +0200116/*
117 * Order in this table matches order in PIH_ISR. That is,
David Brownella30d46c2008-10-20 23:46:28 +0200118 * BIT(n) in PIH_ISR is sih_modules[n].
119 */
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200120/* sih_modules_twl4030 is used both in twl4030 and twl5030 */
121static const struct sih sih_modules_twl4030[6] = {
David Brownella30d46c2008-10-20 23:46:28 +0200122 [0] = {
123 .name = "gpio",
124 .module = TWL4030_MODULE_GPIO,
125 .control_offset = REG_GPIO_SIH_CTRL,
126 .set_cor = true,
127 .bits = TWL4030_GPIO_MAX,
128 .bytes_ixr = 3,
129 /* Note: *all* of these IRQs default to no-trigger */
130 .edr_offset = REG_GPIO_EDR1,
131 .bytes_edr = 5,
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200132 .irq_lines = 2,
David Brownella30d46c2008-10-20 23:46:28 +0200133 .mask = { {
134 .isr_offset = REG_GPIO_ISR1A,
135 .imr_offset = REG_GPIO_IMR1A,
136 }, {
137 .isr_offset = REG_GPIO_ISR1B,
138 .imr_offset = REG_GPIO_IMR1B,
139 }, },
140 },
141 [1] = {
142 .name = "keypad",
143 .set_cor = true,
144 SIH_INITIALIZER(KEYPAD_KEYP, 4)
145 },
146 [2] = {
147 .name = "bci",
148 .module = TWL4030_MODULE_INTERRUPTS,
149 .control_offset = TWL4030_INTERRUPTS_BCISIHCTRL,
Grazvydas Ignotas8e52e272010-09-28 16:22:19 +0300150 .set_cor = true,
David Brownella30d46c2008-10-20 23:46:28 +0200151 .bits = 12,
152 .bytes_ixr = 2,
153 .edr_offset = TWL4030_INTERRUPTS_BCIEDR1,
154 /* Note: most of these IRQs default to no-trigger */
155 .bytes_edr = 3,
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200156 .irq_lines = 2,
David Brownella30d46c2008-10-20 23:46:28 +0200157 .mask = { {
158 .isr_offset = TWL4030_INTERRUPTS_BCIISR1A,
159 .imr_offset = TWL4030_INTERRUPTS_BCIIMR1A,
160 }, {
161 .isr_offset = TWL4030_INTERRUPTS_BCIISR1B,
162 .imr_offset = TWL4030_INTERRUPTS_BCIIMR1B,
163 }, },
164 },
165 [3] = {
166 .name = "madc",
167 SIH_INITIALIZER(MADC, 4)
168 },
169 [4] = {
170 /* USB doesn't use the same SIH organization */
171 .name = "usb",
172 },
173 [5] = {
174 .name = "power",
175 .set_cor = true,
176 SIH_INITIALIZER(INT_PWR, 8)
177 },
178 /* there are no SIH modules #6 or #7 ... */
179};
180
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200181static const struct sih sih_modules_twl5031[8] = {
182 [0] = {
183 .name = "gpio",
184 .module = TWL4030_MODULE_GPIO,
185 .control_offset = REG_GPIO_SIH_CTRL,
186 .set_cor = true,
187 .bits = TWL4030_GPIO_MAX,
188 .bytes_ixr = 3,
189 /* Note: *all* of these IRQs default to no-trigger */
190 .edr_offset = REG_GPIO_EDR1,
191 .bytes_edr = 5,
192 .irq_lines = 2,
193 .mask = { {
194 .isr_offset = REG_GPIO_ISR1A,
195 .imr_offset = REG_GPIO_IMR1A,
196 }, {
197 .isr_offset = REG_GPIO_ISR1B,
198 .imr_offset = REG_GPIO_IMR1B,
199 }, },
200 },
201 [1] = {
202 .name = "keypad",
203 .set_cor = true,
204 SIH_INITIALIZER(KEYPAD_KEYP, 4)
205 },
206 [2] = {
207 .name = "bci",
208 .module = TWL5031_MODULE_INTERRUPTS,
209 .control_offset = TWL5031_INTERRUPTS_BCISIHCTRL,
210 .bits = 7,
211 .bytes_ixr = 1,
212 .edr_offset = TWL5031_INTERRUPTS_BCIEDR1,
213 /* Note: most of these IRQs default to no-trigger */
214 .bytes_edr = 2,
215 .irq_lines = 2,
216 .mask = { {
217 .isr_offset = TWL5031_INTERRUPTS_BCIISR1,
218 .imr_offset = TWL5031_INTERRUPTS_BCIIMR1,
219 }, {
220 .isr_offset = TWL5031_INTERRUPTS_BCIISR2,
221 .imr_offset = TWL5031_INTERRUPTS_BCIIMR2,
222 }, },
223 },
224 [3] = {
225 .name = "madc",
226 SIH_INITIALIZER(MADC, 4)
227 },
228 [4] = {
229 /* USB doesn't use the same SIH organization */
230 .name = "usb",
231 },
232 [5] = {
233 .name = "power",
234 .set_cor = true,
235 SIH_INITIALIZER(INT_PWR, 8)
236 },
237 [6] = {
238 /*
Ilkka Koskinen191211f2010-05-20 13:04:20 +0300239 * ECI/DBI doesn't use the same SIH organization.
240 * For example, it supports only one interrupt output line.
241 * That is, the interrupts are seen on both INT1 and INT2 lines.
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200242 */
Ilkka Koskinen191211f2010-05-20 13:04:20 +0300243 .name = "eci_dbi",
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200244 .module = TWL5031_MODULE_ACCESSORY,
245 .bits = 9,
246 .bytes_ixr = 2,
247 .irq_lines = 1,
248 .mask = { {
249 .isr_offset = TWL5031_ACIIDR_LSB,
250 .imr_offset = TWL5031_ACIIMR_LSB,
251 }, },
252
253 },
254 [7] = {
Ilkka Koskinen191211f2010-05-20 13:04:20 +0300255 /* Audio accessory */
256 .name = "audio",
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200257 .module = TWL5031_MODULE_ACCESSORY,
258 .control_offset = TWL5031_ACCSIHCTRL,
259 .bits = 2,
260 .bytes_ixr = 1,
261 .edr_offset = TWL5031_ACCEDR1,
262 /* Note: most of these IRQs default to no-trigger */
263 .bytes_edr = 1,
264 .irq_lines = 2,
265 .mask = { {
266 .isr_offset = TWL5031_ACCISR1,
267 .imr_offset = TWL5031_ACCIMR1,
268 }, {
269 .isr_offset = TWL5031_ACCISR2,
270 .imr_offset = TWL5031_ACCIMR2,
271 }, },
272 },
273};
274
David Brownella30d46c2008-10-20 23:46:28 +0200275#undef TWL4030_MODULE_KEYPAD_KEYP
276#undef TWL4030_MODULE_INT_PWR
277#undef TWL4030_INT_PWR_EDR
278
279/*----------------------------------------------------------------------*/
280
281static unsigned twl4030_irq_base;
282
David Brownella30d46c2008-10-20 23:46:28 +0200283/*
284 * handle_twl4030_pih() is the desc->handle method for the twl4030 interrupt.
285 * This is a chained interrupt, so there is no desc->action method for it.
286 * Now we need to query the interrupt controller in the twl4030 to determine
287 * which module is generating the interrupt request. However, we can't do i2c
288 * transactions in interrupt context, so we must defer that work to a kernel
289 * thread. All we do here is acknowledge and mask the interrupt and wakeup
290 * the kernel thread.
291 */
Russell King1cef8e42009-07-27 11:30:48 +0530292static irqreturn_t handle_twl4030_pih(int irq, void *devid)
David Brownella30d46c2008-10-20 23:46:28 +0200293{
Felipe Balbi7750c9b2011-06-30 12:51:06 +0300294 irqreturn_t ret;
295 u8 pih_isr;
296
Peter Ujfalusi6fbc6422012-11-13 09:28:53 +0100297 ret = twl_i2c_read_u8(TWL_MODULE_PIH, &pih_isr,
298 REG_PIH_ISR_P1);
Felipe Balbi7750c9b2011-06-30 12:51:06 +0300299 if (ret) {
Lee Jones04aa4432014-07-21 14:05:24 +0100300 pr_warn("twl4030: I2C error %d reading PIH ISR\n", ret);
Felipe Balbi7750c9b2011-06-30 12:51:06 +0300301 return IRQ_NONE;
302 }
303
Felipe Balbi5a903092012-02-22 14:53:59 +0200304 while (pih_isr) {
305 unsigned long pending = __ffs(pih_isr);
306 unsigned int irq;
307
308 pih_isr &= ~BIT(pending);
309 irq = pending + twl4030_irq_base;
310 handle_nested_irq(irq);
Felipe Balbi7750c9b2011-06-30 12:51:06 +0300311 }
312
Russell King1cef8e42009-07-27 11:30:48 +0530313 return IRQ_HANDLED;
David Brownella30d46c2008-10-20 23:46:28 +0200314}
Felipe Contrerascbcde052012-02-01 03:02:48 +0200315
David Brownella30d46c2008-10-20 23:46:28 +0200316/*----------------------------------------------------------------------*/
317
318/*
319 * twl4030_init_sih_modules() ... start from a known state where no
320 * IRQs will be coming in, and where we can quickly enable them then
321 * handle them as they arrive. Mask all IRQs: maybe init SIH_CTRL.
322 *
323 * NOTE: we don't touch EDR registers here; they stay with hardware
324 * defaults or whatever the last value was. Note that when both EDR
325 * bits for an IRQ are clear, that's as if its IMR bit is set...
326 */
327static int twl4030_init_sih_modules(unsigned line)
328{
329 const struct sih *sih;
330 u8 buf[4];
331 int i;
332 int status;
333
334 /* line 0 == int1_n signal; line 1 == int2_n signal */
335 if (line > 1)
336 return -EINVAL;
337
338 irq_line = line;
339
340 /* disable all interrupts on our line */
Lee Jones04aa4432014-07-21 14:05:24 +0100341 memset(buf, 0xff, sizeof(buf));
David Brownella30d46c2008-10-20 23:46:28 +0200342 sih = sih_modules;
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200343 for (i = 0; i < nr_sih_modules; i++, sih++) {
David Brownella30d46c2008-10-20 23:46:28 +0200344 /* skip USB -- it's funky */
345 if (!sih->bytes_ixr)
346 continue;
347
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200348 /* Not all the SIH modules support multiple interrupt lines */
349 if (sih->irq_lines <= line)
350 continue;
351
Balaji T Kfc7b92f2009-12-13 21:23:33 +0100352 status = twl_i2c_write(sih->module, buf,
David Brownella30d46c2008-10-20 23:46:28 +0200353 sih->mask[line].imr_offset, sih->bytes_ixr);
354 if (status < 0)
355 pr_err("twl4030: err %d initializing %s %s\n",
356 status, sih->name, "IMR");
357
Felipe Contrerascbcde052012-02-01 03:02:48 +0200358 /*
359 * Maybe disable "exclusive" mode; buffer second pending irq;
David Brownella30d46c2008-10-20 23:46:28 +0200360 * set Clear-On-Read (COR) bit.
361 *
362 * NOTE that sometimes COR polarity is documented as being
Grazvydas Ignotas8e52e272010-09-28 16:22:19 +0300363 * inverted: for MADC, COR=1 means "clear on write".
David Brownella30d46c2008-10-20 23:46:28 +0200364 * And for PWR_INT it's not documented...
365 */
366 if (sih->set_cor) {
Balaji T Kfc7b92f2009-12-13 21:23:33 +0100367 status = twl_i2c_write_u8(sih->module,
David Brownella30d46c2008-10-20 23:46:28 +0200368 TWL4030_SIH_CTRL_COR_MASK,
369 sih->control_offset);
370 if (status < 0)
371 pr_err("twl4030: err %d initializing %s %s\n",
372 status, sih->name, "SIH_CTRL");
373 }
374 }
375
376 sih = sih_modules;
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200377 for (i = 0; i < nr_sih_modules; i++, sih++) {
David Brownella30d46c2008-10-20 23:46:28 +0200378 u8 rxbuf[4];
379 int j;
380
381 /* skip USB */
382 if (!sih->bytes_ixr)
383 continue;
384
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200385 /* Not all the SIH modules support multiple interrupt lines */
386 if (sih->irq_lines <= line)
387 continue;
388
Felipe Contrerascbcde052012-02-01 03:02:48 +0200389 /*
390 * Clear pending interrupt status. Either the read was
David Brownella30d46c2008-10-20 23:46:28 +0200391 * enough, or we need to write those bits. Repeat, in
392 * case an IRQ is pending (PENDDIS=0) ... that's not
393 * uncommon with PWR_INT.PWRON.
394 */
395 for (j = 0; j < 2; j++) {
Balaji T Kfc7b92f2009-12-13 21:23:33 +0100396 status = twl_i2c_read(sih->module, rxbuf,
David Brownella30d46c2008-10-20 23:46:28 +0200397 sih->mask[line].isr_offset, sih->bytes_ixr);
398 if (status < 0)
Lee Jones8a012ff2014-08-18 16:03:14 +0100399 pr_warn("twl4030: err %d initializing %s %s\n",
David Brownella30d46c2008-10-20 23:46:28 +0200400 status, sih->name, "ISR");
401
Lee Jones8a012ff2014-08-18 16:03:14 +0100402 if (!sih->set_cor) {
Balaji T Kfc7b92f2009-12-13 21:23:33 +0100403 status = twl_i2c_write(sih->module, buf,
David Brownella30d46c2008-10-20 23:46:28 +0200404 sih->mask[line].isr_offset,
405 sih->bytes_ixr);
Lee Jones8a012ff2014-08-18 16:03:14 +0100406 if (status < 0)
407 pr_warn("twl4030: write failed: %d\n",
408 status);
409 }
Felipe Contrerascbcde052012-02-01 03:02:48 +0200410 /*
411 * else COR=1 means read sufficed.
David Brownella30d46c2008-10-20 23:46:28 +0200412 * (for most SIH modules...)
413 */
414 }
415 }
416
417 return 0;
418}
419
420static inline void activate_irq(int irq)
421{
422#ifdef CONFIG_ARM
Felipe Contrerascbcde052012-02-01 03:02:48 +0200423 /*
424 * ARM requires an extra step to clear IRQ_NOREQUEST, which it
David Brownella30d46c2008-10-20 23:46:28 +0200425 * sets on behalf of every irq_chip. Also sets IRQ_NOPROBE.
426 */
427 set_irq_flags(irq, IRQF_VALID);
428#else
429 /* same effect on other architectures */
Thomas Gleixnerd5bb1222011-03-25 11:12:32 +0000430 irq_set_noprobe(irq);
David Brownella30d46c2008-10-20 23:46:28 +0200431#endif
432}
433
434/*----------------------------------------------------------------------*/
435
David Brownella30d46c2008-10-20 23:46:28 +0200436struct sih_agent {
437 int irq_base;
438 const struct sih *sih;
439
440 u32 imr;
441 bool imr_change_pending;
David Brownella30d46c2008-10-20 23:46:28 +0200442
443 u32 edge_change;
Felipe Balbi91e35692011-06-30 12:51:05 +0300444
445 struct mutex irq_lock;
NeilBrownc1e61bc2011-11-27 07:17:41 +1100446 char *irq_name;
David Brownella30d46c2008-10-20 23:46:28 +0200447};
448
David Brownella30d46c2008-10-20 23:46:28 +0200449/*----------------------------------------------------------------------*/
450
451/*
452 * All irq_chip methods get issued from code holding irq_desc[irq].lock,
453 * which can't perform the underlying I2C operations (because they sleep).
454 * So we must hand them off to a thread (workqueue) and cope with asynch
455 * completion, potentially including some re-ordering, of these requests.
456 */
457
Mark Brown845aeab2010-12-12 12:51:39 +0000458static void twl4030_sih_mask(struct irq_data *data)
David Brownella30d46c2008-10-20 23:46:28 +0200459{
Felipe Balbi84868422011-06-30 12:51:07 +0300460 struct sih_agent *agent = irq_data_get_irq_chip_data(data);
David Brownella30d46c2008-10-20 23:46:28 +0200461
Felipe Balbi84868422011-06-30 12:51:07 +0300462 agent->imr |= BIT(data->irq - agent->irq_base);
463 agent->imr_change_pending = true;
David Brownella30d46c2008-10-20 23:46:28 +0200464}
465
Mark Brown845aeab2010-12-12 12:51:39 +0000466static void twl4030_sih_unmask(struct irq_data *data)
David Brownella30d46c2008-10-20 23:46:28 +0200467{
Felipe Balbi84868422011-06-30 12:51:07 +0300468 struct sih_agent *agent = irq_data_get_irq_chip_data(data);
David Brownella30d46c2008-10-20 23:46:28 +0200469
Felipe Balbi84868422011-06-30 12:51:07 +0300470 agent->imr &= ~BIT(data->irq - agent->irq_base);
471 agent->imr_change_pending = true;
David Brownella30d46c2008-10-20 23:46:28 +0200472}
473
Mark Brown845aeab2010-12-12 12:51:39 +0000474static int twl4030_sih_set_type(struct irq_data *data, unsigned trigger)
David Brownella30d46c2008-10-20 23:46:28 +0200475{
Felipe Balbi84868422011-06-30 12:51:07 +0300476 struct sih_agent *agent = irq_data_get_irq_chip_data(data);
David Brownella30d46c2008-10-20 23:46:28 +0200477
David Brownella30d46c2008-10-20 23:46:28 +0200478 if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
479 return -EINVAL;
480
Felipe Balbi2f2a7d52011-06-30 12:51:08 +0300481 if (irqd_get_trigger_type(data) != trigger)
Felipe Balbi84868422011-06-30 12:51:07 +0300482 agent->edge_change |= BIT(data->irq - agent->irq_base);
Felipe Balbi91e35692011-06-30 12:51:05 +0300483
David Brownella30d46c2008-10-20 23:46:28 +0200484 return 0;
485}
486
Felipe Balbi91e35692011-06-30 12:51:05 +0300487static void twl4030_sih_bus_lock(struct irq_data *data)
488{
Felipe Balbi84868422011-06-30 12:51:07 +0300489 struct sih_agent *agent = irq_data_get_irq_chip_data(data);
Felipe Balbi91e35692011-06-30 12:51:05 +0300490
Felipe Balbi84868422011-06-30 12:51:07 +0300491 mutex_lock(&agent->irq_lock);
Felipe Balbi91e35692011-06-30 12:51:05 +0300492}
493
494static void twl4030_sih_bus_sync_unlock(struct irq_data *data)
495{
Felipe Balbi84868422011-06-30 12:51:07 +0300496 struct sih_agent *agent = irq_data_get_irq_chip_data(data);
497 const struct sih *sih = agent->sih;
498 int status;
Felipe Balbi91e35692011-06-30 12:51:05 +0300499
Felipe Balbi84868422011-06-30 12:51:07 +0300500 if (agent->imr_change_pending) {
501 union {
502 u32 word;
503 u8 bytes[4];
504 } imr;
505
NeilBrownc9531222011-11-27 07:17:41 +1100506 /* byte[0] gets overwritten as we write ... */
Peter Ujfalusi14591d82012-11-13 09:28:45 +0100507 imr.word = cpu_to_le32(agent->imr);
Felipe Balbi84868422011-06-30 12:51:07 +0300508 agent->imr_change_pending = false;
509
510 /* write the whole mask ... simpler than subsetting it */
511 status = twl_i2c_write(sih->module, imr.bytes,
512 sih->mask[irq_line].imr_offset,
513 sih->bytes_ixr);
514 if (status)
515 pr_err("twl4030: %s, %s --> %d\n", __func__,
516 "write", status);
517 }
518
Felipe Balbi2f2a7d52011-06-30 12:51:08 +0300519 if (agent->edge_change) {
520 u32 edge_change;
521 u8 bytes[6];
522
523 edge_change = agent->edge_change;
524 agent->edge_change = 0;
525
526 /*
527 * Read, reserving first byte for write scratch. Yes, this
528 * could be cached for some speedup ... but be careful about
529 * any processor on the other IRQ line, EDR registers are
530 * shared.
531 */
Peter Ujfalusi14591d82012-11-13 09:28:45 +0100532 status = twl_i2c_read(sih->module, bytes,
Felipe Balbi2f2a7d52011-06-30 12:51:08 +0300533 sih->edr_offset, sih->bytes_edr);
534 if (status) {
535 pr_err("twl4030: %s, %s --> %d\n", __func__,
536 "read", status);
537 return;
538 }
539
540 /* Modify only the bits we know must change */
541 while (edge_change) {
542 int i = fls(edge_change) - 1;
Peter Ujfalusi14591d82012-11-13 09:28:45 +0100543 int byte = i >> 2;
Felipe Balbi2f2a7d52011-06-30 12:51:08 +0300544 int off = (i & 0x3) * 2;
545 unsigned int type;
546
Felipe Balbi2f2a7d52011-06-30 12:51:08 +0300547 bytes[byte] &= ~(0x03 << off);
548
Javier Martinez Canillas5dbf79d2013-06-14 18:40:45 +0200549 type = irq_get_trigger_type(i + agent->irq_base);
Felipe Balbi2f2a7d52011-06-30 12:51:08 +0300550 if (type & IRQ_TYPE_EDGE_RISING)
551 bytes[byte] |= BIT(off + 1);
552 if (type & IRQ_TYPE_EDGE_FALLING)
553 bytes[byte] |= BIT(off + 0);
554
555 edge_change &= ~BIT(i);
556 }
557
558 /* Write */
559 status = twl_i2c_write(sih->module, bytes,
560 sih->edr_offset, sih->bytes_edr);
561 if (status)
562 pr_err("twl4030: %s, %s --> %d\n", __func__,
563 "write", status);
564 }
565
Felipe Balbi84868422011-06-30 12:51:07 +0300566 mutex_unlock(&agent->irq_lock);
Felipe Balbi91e35692011-06-30 12:51:05 +0300567}
568
David Brownella30d46c2008-10-20 23:46:28 +0200569static struct irq_chip twl4030_sih_irq_chip = {
570 .name = "twl4030",
Felipe Balbi8cd6af22011-06-30 12:51:04 +0300571 .irq_mask = twl4030_sih_mask,
Mark Brown845aeab2010-12-12 12:51:39 +0000572 .irq_unmask = twl4030_sih_unmask,
573 .irq_set_type = twl4030_sih_set_type,
Felipe Balbi91e35692011-06-30 12:51:05 +0300574 .irq_bus_lock = twl4030_sih_bus_lock,
575 .irq_bus_sync_unlock = twl4030_sih_bus_sync_unlock,
Kevin Hilman55098ff2013-05-31 14:44:54 -0700576 .flags = IRQCHIP_SKIP_SET_WAKE,
David Brownella30d46c2008-10-20 23:46:28 +0200577};
578
579/*----------------------------------------------------------------------*/
580
581static inline int sih_read_isr(const struct sih *sih)
582{
583 int status;
584 union {
585 u8 bytes[4];
586 u32 word;
587 } isr;
588
589 /* FIXME need retry-on-error ... */
590
591 isr.word = 0;
Balaji T Kfc7b92f2009-12-13 21:23:33 +0100592 status = twl_i2c_read(sih->module, isr.bytes,
David Brownella30d46c2008-10-20 23:46:28 +0200593 sih->mask[irq_line].isr_offset, sih->bytes_ixr);
594
595 return (status < 0) ? status : le32_to_cpu(isr.word);
596}
597
598/*
599 * Generic handler for SIH interrupts ... we "know" this is called
600 * in task context, with IRQs enabled.
601 */
NeilBrownc1e61bc2011-11-27 07:17:41 +1100602static irqreturn_t handle_twl4030_sih(int irq, void *data)
David Brownella30d46c2008-10-20 23:46:28 +0200603{
Thomas Gleixnerd5bb1222011-03-25 11:12:32 +0000604 struct sih_agent *agent = irq_get_handler_data(irq);
David Brownella30d46c2008-10-20 23:46:28 +0200605 const struct sih *sih = agent->sih;
606 int isr;
607
608 /* reading ISR acks the IRQs, using clear-on-read mode */
David Brownella30d46c2008-10-20 23:46:28 +0200609 isr = sih_read_isr(sih);
David Brownella30d46c2008-10-20 23:46:28 +0200610
611 if (isr < 0) {
612 pr_err("twl4030: %s SIH, read ISR error %d\n",
613 sih->name, isr);
614 /* REVISIT: recover; eventually mask it all, etc */
NeilBrownc1e61bc2011-11-27 07:17:41 +1100615 return IRQ_HANDLED;
David Brownella30d46c2008-10-20 23:46:28 +0200616 }
617
618 while (isr) {
619 irq = fls(isr);
620 irq--;
621 isr &= ~BIT(irq);
622
623 if (irq < sih->bits)
Felipe Balbi925e8532011-06-30 12:51:09 +0300624 handle_nested_irq(agent->irq_base + irq);
David Brownella30d46c2008-10-20 23:46:28 +0200625 else
626 pr_err("twl4030: %s SIH, invalid ISR bit %d\n",
627 sih->name, irq);
628 }
NeilBrownc1e61bc2011-11-27 07:17:41 +1100629 return IRQ_HANDLED;
David Brownella30d46c2008-10-20 23:46:28 +0200630}
631
Felipe Contrerascbcde052012-02-01 03:02:48 +0200632/* returns the first IRQ used by this SIH bank, or negative errno */
Benoit Coussonf01b1f92012-02-29 22:38:06 +0100633int twl4030_sih_setup(struct device *dev, int module, int irq_base)
David Brownella30d46c2008-10-20 23:46:28 +0200634{
635 int sih_mod;
636 const struct sih *sih = NULL;
637 struct sih_agent *agent;
638 int i, irq;
639 int status = -EINVAL;
David Brownella30d46c2008-10-20 23:46:28 +0200640
641 /* only support modules with standard clear-on-read for now */
Benoit Coussonec1a07b2012-03-02 11:11:26 +0100642 for (sih_mod = 0, sih = sih_modules; sih_mod < nr_sih_modules;
David Brownella30d46c2008-10-20 23:46:28 +0200643 sih_mod++, sih++) {
644 if (sih->module == module && sih->set_cor) {
Benoit Coussonf01b1f92012-02-29 22:38:06 +0100645 status = 0;
David Brownella30d46c2008-10-20 23:46:28 +0200646 break;
647 }
648 }
Benoit Coussonec1a07b2012-03-02 11:11:26 +0100649
David Brownella30d46c2008-10-20 23:46:28 +0200650 if (status < 0)
651 return status;
652
Lee Jones04aa4432014-07-21 14:05:24 +0100653 agent = kzalloc(sizeof(*agent), GFP_KERNEL);
David Brownella30d46c2008-10-20 23:46:28 +0200654 if (!agent)
655 return -ENOMEM;
656
David Brownella30d46c2008-10-20 23:46:28 +0200657 agent->irq_base = irq_base;
658 agent->sih = sih;
659 agent->imr = ~0;
Felipe Balbi91e35692011-06-30 12:51:05 +0300660 mutex_init(&agent->irq_lock);
David Brownella30d46c2008-10-20 23:46:28 +0200661
662 for (i = 0; i < sih->bits; i++) {
663 irq = irq_base + i;
664
Felipe Balbi91e35692011-06-30 12:51:05 +0300665 irq_set_chip_data(irq, agent);
Thomas Gleixnerd5bb1222011-03-25 11:12:32 +0000666 irq_set_chip_and_handler(irq, &twl4030_sih_irq_chip,
667 handle_edge_irq);
NeilBrownb18d1f02011-11-27 07:17:41 +1100668 irq_set_nested_thread(irq, 1);
David Brownella30d46c2008-10-20 23:46:28 +0200669 activate_irq(irq);
670 }
671
David Brownella30d46c2008-10-20 23:46:28 +0200672 /* replace generic PIH handler (handle_simple_irq) */
673 irq = sih_mod + twl4030_irq_base;
Thomas Gleixnerd5bb1222011-03-25 11:12:32 +0000674 irq_set_handler_data(irq, agent);
NeilBrownc1e61bc2011-11-27 07:17:41 +1100675 agent->irq_name = kasprintf(GFP_KERNEL, "twl4030_%s", sih->name);
Kalle Jokiniemi8b416692012-10-16 17:59:35 +0300676 status = request_threaded_irq(irq, NULL, handle_twl4030_sih,
Fabio Estevam7d5b1ed2015-05-16 15:42:10 -0300677 IRQF_EARLY_RESUME | IRQF_ONESHOT,
NeilBrownc1e61bc2011-11-27 07:17:41 +1100678 agent->irq_name ?: sih->name, NULL);
David Brownella30d46c2008-10-20 23:46:28 +0200679
Benoit Coussonec1a07b2012-03-02 11:11:26 +0100680 dev_info(dev, "%s (irq %d) chaining IRQs %d..%d\n", sih->name,
Benoit Coussonf01b1f92012-02-29 22:38:06 +0100681 irq, irq_base, irq_base + i - 1);
David Brownella30d46c2008-10-20 23:46:28 +0200682
NeilBrownc1e61bc2011-11-27 07:17:41 +1100683 return status < 0 ? status : irq_base;
David Brownella30d46c2008-10-20 23:46:28 +0200684}
685
686/* FIXME need a call to reverse twl4030_sih_setup() ... */
687
David Brownella30d46c2008-10-20 23:46:28 +0200688/*----------------------------------------------------------------------*/
689
690/* FIXME pass in which interrupt line we'll use ... */
691#define twl_irq_line 0
692
Benoit Cousson78518ff2012-02-29 19:40:31 +0100693int twl4030_init_irq(struct device *dev, int irq_num)
David Brownella30d46c2008-10-20 23:46:28 +0200694{
695 static struct irq_chip twl4030_irq_chip;
Benoit Coussonec1a07b2012-03-02 11:11:26 +0100696 int status, i;
Benoit Cousson78518ff2012-02-29 19:40:31 +0100697 int irq_base, irq_end, nr_irqs;
698 struct device_node *node = dev->of_node;
David Brownella30d46c2008-10-20 23:46:28 +0200699
David Brownella30d46c2008-10-20 23:46:28 +0200700 /*
Benoit Cousson78518ff2012-02-29 19:40:31 +0100701 * TWL core and pwr interrupts must be contiguous because
702 * the hwirqs numbers are defined contiguously from 1 to 15.
703 * Create only one domain for both.
704 */
705 nr_irqs = TWL4030_PWR_NR_IRQS + TWL4030_CORE_NR_IRQS;
706
707 irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0);
708 if (IS_ERR_VALUE(irq_base)) {
709 dev_err(dev, "Fail to allocate IRQ descs\n");
710 return irq_base;
711 }
712
713 irq_domain_add_legacy(node, nr_irqs, irq_base, 0,
714 &irq_domain_simple_ops, NULL);
715
716 irq_end = irq_base + TWL4030_CORE_NR_IRQS;
717
718 /*
David Brownella30d46c2008-10-20 23:46:28 +0200719 * Mask and clear all TWL4030 interrupts since initially we do
720 * not have any TWL4030 module interrupt handlers present
721 */
722 status = twl4030_init_sih_modules(twl_irq_line);
723 if (status < 0)
724 return status;
725
David Brownella30d46c2008-10-20 23:46:28 +0200726 twl4030_irq_base = irq_base;
727
Felipe Contrerascbcde052012-02-01 03:02:48 +0200728 /*
Benoit Coussonec1a07b2012-03-02 11:11:26 +0100729 * Install an irq handler for each of the SIH modules;
David Brownella30d46c2008-10-20 23:46:28 +0200730 * clone dummy irq_chip since PIH can't *do* anything
731 */
732 twl4030_irq_chip = dummy_irq_chip;
733 twl4030_irq_chip.name = "twl4030";
734
Thomas Gleixnerfe212212010-10-08 15:33:01 +0200735 twl4030_sih_irq_chip.irq_ack = dummy_irq_chip.irq_ack;
David Brownella30d46c2008-10-20 23:46:28 +0200736
737 for (i = irq_base; i < irq_end; i++) {
Thomas Gleixnerd5bb1222011-03-25 11:12:32 +0000738 irq_set_chip_and_handler(i, &twl4030_irq_chip,
739 handle_simple_irq);
Felipe Balbi925e8532011-06-30 12:51:09 +0300740 irq_set_nested_thread(i, 1);
David Brownella30d46c2008-10-20 23:46:28 +0200741 activate_irq(i);
742 }
Benoit Coussonf01b1f92012-02-29 22:38:06 +0100743
Benoit Coussonec1a07b2012-03-02 11:11:26 +0100744 dev_info(dev, "%s (irq %d) chaining IRQs %d..%d\n", "PIH",
Benoit Coussonf01b1f92012-02-29 22:38:06 +0100745 irq_num, irq_base, irq_end);
David Brownella30d46c2008-10-20 23:46:28 +0200746
747 /* ... and the PWR_INT module ... */
Benoit Coussonf01b1f92012-02-29 22:38:06 +0100748 status = twl4030_sih_setup(dev, TWL4030_MODULE_INT, irq_end);
David Brownella30d46c2008-10-20 23:46:28 +0200749 if (status < 0) {
Benoit Coussonec1a07b2012-03-02 11:11:26 +0100750 dev_err(dev, "sih_setup PWR INT --> %d\n", status);
David Brownella30d46c2008-10-20 23:46:28 +0200751 goto fail;
752 }
753
754 /* install an irq handler to demultiplex the TWL4030 interrupt */
NeilBrown286f8f32011-11-27 07:17:41 +1100755 status = request_threaded_irq(irq_num, NULL, handle_twl4030_pih,
756 IRQF_ONESHOT,
757 "TWL4030-PIH", NULL);
Russell King1cef8e42009-07-27 11:30:48 +0530758 if (status < 0) {
Benoit Coussonec1a07b2012-03-02 11:11:26 +0100759 dev_err(dev, "could not claim irq%d: %d\n", irq_num, status);
Russell King1cef8e42009-07-27 11:30:48 +0530760 goto fail_rqirq;
David Brownella30d46c2008-10-20 23:46:28 +0200761 }
NeilBrown5a2f1b52012-04-25 13:05:24 +1000762 enable_irq_wake(irq_num);
David Brownella30d46c2008-10-20 23:46:28 +0200763
Benoit Cousson78518ff2012-02-29 19:40:31 +0100764 return irq_base;
Russell King1cef8e42009-07-27 11:30:48 +0530765fail_rqirq:
766 /* clean up twl4030_sih_setup */
David Brownella30d46c2008-10-20 23:46:28 +0200767fail:
Felipe Balbi925e8532011-06-30 12:51:09 +0300768 for (i = irq_base; i < irq_end; i++) {
769 irq_set_nested_thread(i, 0);
Thomas Gleixnerd5bb1222011-03-25 11:12:32 +0000770 irq_set_chip_and_handler(i, NULL, NULL);
Felipe Balbi925e8532011-06-30 12:51:09 +0300771 }
Felipe Balbi2f2a7d52011-06-30 12:51:08 +0300772
David Brownella30d46c2008-10-20 23:46:28 +0200773 return status;
774}
775
Balaji T Ke8deb282009-12-14 00:25:31 +0100776int twl4030_exit_irq(void)
David Brownella30d46c2008-10-20 23:46:28 +0200777{
778 /* FIXME undo twl_init_irq() */
779 if (twl4030_irq_base) {
780 pr_err("twl4030: can't yet clean up IRQs?\n");
781 return -ENOSYS;
782 }
783 return 0;
784}
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200785
Balaji T Ke8deb282009-12-14 00:25:31 +0100786int twl4030_init_chip_irq(const char *chip)
Ilkka Koskinen1920a612009-11-10 17:26:15 +0200787{
788 if (!strcmp(chip, "twl5031")) {
789 sih_modules = sih_modules_twl5031;
790 nr_sih_modules = ARRAY_SIZE(sih_modules_twl5031);
791 } else {
792 sih_modules = sih_modules_twl4030;
793 nr_sih_modules = ARRAY_SIZE(sih_modules_twl4030);
794 }
795
796 return 0;
797}