blob: 5d4f42afb4b5511923211469662d0b4a6819efdd [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# USB Host Controller Drivers
3#
4comment "USB Host Controller Drivers"
5 depends on USB
6
Peter Korsgaarde9b29ff2008-04-27 08:59:45 +02007config USB_C67X00_HCD
8 tristate "Cypress C67x00 HCD support"
9 depends on USB
10 help
11 The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
12 host/peripheral/OTG USB controllers.
13
14 Enable this option to support this chip in host controller mode.
15 If unsure, say N.
16
17 To compile this driver as a module, choose M here: the
18 module will be called c67x00.
19
Sarah Sharpeb6bab12009-04-29 19:07:13 -070020config USB_XHCI_HCD
Greg Kroah-Hartmaneb83be92012-09-14 21:15:50 -070021 tristate "xHCI HCD (USB 3.0) support"
22 depends on USB && USB_ARCH_HAS_XHCI
Sarah Sharpeb6bab12009-04-29 19:07:13 -070023 ---help---
24 The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
25 "SuperSpeed" host controller hardware.
26
27 To compile this driver as a module, choose M here: the
28 module will be called xhci-hcd.
29
Sebastian Andrzej Siewior3429e912012-03-13 16:57:41 +020030config USB_XHCI_PLATFORM
31 tristate
32 depends on USB_XHCI_HCD
33
Sarah Sharpeb6bab12009-04-29 19:07:13 -070034config USB_XHCI_HCD_DEBUGGING
35 bool "Debugging for the xHCI host controller"
36 depends on USB_XHCI_HCD
37 ---help---
38 Say 'Y' to turn on debugging for the xHCI host controller driver.
39 This will spew debugging output, even in interrupt context.
40 This should only be used for debugging xHCI driver bugs.
41
42 If unsure, say N.
43
Linus Torvalds1da177e2005-04-16 15:20:36 -070044config USB_EHCI_HCD
45 tristate "EHCI HCD (USB 2.0) support"
Jordan Crouse76fa9a22006-01-20 14:06:09 -080046 depends on USB && USB_ARCH_HAS_EHCI
Linus Torvalds1da177e2005-04-16 15:20:36 -070047 ---help---
48 The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
49 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
50 If your USB host controller supports USB 2.0, you will likely want to
Thierry Vignaudb967c882009-02-11 13:31:05 -080051 configure this Host Controller Driver.
Linus Torvalds1da177e2005-04-16 15:20:36 -070052
53 EHCI controllers are packaged with "companion" host controllers (OHCI
54 or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
Jesper Juhlb3c29d82006-01-10 00:35:22 +010055 will connect to EHCI if the device is high speed, otherwise they
Linus Torvalds1da177e2005-04-16 15:20:36 -070056 connect to a companion controller. If you configure EHCI, you should
57 probably configure the OHCI (for NEC and some other vendors) USB Host
58 Controller Driver or UHCI (for Via motherboards) Host Controller
59 Driver too.
60
61 You may want to read <file:Documentation/usb/ehci.txt>.
62
63 To compile this driver as a module, choose M here: the
64 module will be called ehci-hcd.
65
Linus Torvalds1da177e2005-04-16 15:20:36 -070066config USB_EHCI_ROOT_HUB_TT
Robert P. J. Day9ec249a2008-03-08 03:27:44 -050067 bool "Root Hub Transaction Translators"
Marek Vasutb12909b2012-05-15 06:10:20 +020068 depends on USB_EHCI_HCD || USB_CHIPIDEA_HOST
Linus Torvalds1da177e2005-04-16 15:20:36 -070069 ---help---
70 Some EHCI chips have vendor-specific extensions to integrate
71 transaction translators, so that no OHCI or UHCI companion
72 controller is needed. It's safe to say "y" even if your
73 controller doesn't support this feature.
74
Dan Streetmanba47f662006-05-24 09:39:16 -070075 This supports the EHCI implementation that's originally
76 from ARC, and has since changed hands a few times.
77
78config USB_EHCI_TT_NEWSCHED
Alan Stern37cd6812010-05-21 17:08:21 -040079 bool "Improved Transaction Translator scheduling"
Marek Vasutb12909b2012-05-15 06:10:20 +020080 depends on USB_EHCI_HCD || USB_CHIPIDEA_HOST
Alan Stern37cd6812010-05-21 17:08:21 -040081 default y
Dan Streetmanba47f662006-05-24 09:39:16 -070082 ---help---
83 This changes the periodic scheduling code to fill more of the low
84 and full speed bandwidth available from the Transaction Translator
85 (TT) in USB 2.0 hubs. Without this, only one transfer will be
86 issued in each microframe, significantly reducing the number of
87 periodic low/fullspeed transfers possible.
88
89 If you have multiple periodic low/fullspeed devices connected to a
90 highspeed USB hub which is connected to a highspeed USB Host
91 Controller, and some of those devices will not work correctly
Alan Stern37cd6812010-05-21 17:08:21 -040092 (possibly due to "ENOSPC" or "-28" errors), say Y. Conversely, if
93 you have only one such device and it doesn't work, you could try
94 saying N.
Dan Streetmanba47f662006-05-24 09:39:16 -070095
Alan Stern37cd6812010-05-21 17:08:21 -040096 If unsure, say Y.
Linus Torvalds1da177e2005-04-16 15:20:36 -070097
Alan Sternadfa79d2012-11-01 11:13:04 -040098config USB_EHCI_PCI
99 tristate
100 depends on USB_EHCI_HCD && PCI
101 default y
102
Anoop22ced6872011-02-24 19:26:28 +0530103config USB_EHCI_HCD_PMC_MSP
104 tristate "EHCI support for on-chip PMC MSP71xx USB controller"
105 depends on USB_EHCI_HCD && MSP_HAS_USB
106 default n
107 select USB_EHCI_BIG_ENDIAN_DESC
108 select USB_EHCI_BIG_ENDIAN_MMIO
109 ---help---
110 Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's.
111 If unsure, say N.
112
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100113config USB_EHCI_BIG_ENDIAN_MMIO
114 bool
David Daney1643acc2010-10-08 14:47:52 -0700115 depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || \
116 ARCH_IXP4XX || XPS_USB_HCD_XILINX || \
Anoop22ced6872011-02-24 19:26:28 +0530117 PPC_MPC512x || CPU_CAVIUM_OCTEON || \
Steven J. Hillc2566672012-04-19 12:57:31 -0500118 PMC_MSP || SPARC_LEON || MIPS_SEAD3)
Stefan Roese4d68c0b2007-05-04 11:39:37 -0700119 default y
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100120
Stefan Roese6dbd6822007-05-01 09:29:37 -0700121config USB_EHCI_BIG_ENDIAN_DESC
122 bool
Anatolij Gustschin230f7ed2010-09-28 20:55:21 +0200123 depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || XPS_USB_HCD_XILINX || \
Steven J. Hillc2566672012-04-19 12:57:31 -0500124 PPC_MPC512x || PMC_MSP || SPARC_LEON || \
125 MIPS_SEAD3)
Stefan Roese4d68c0b2007-05-04 11:39:37 -0700126 default y
Stefan Roese6dbd6822007-05-01 09:29:37 -0700127
Julie Zhu08d3c182009-09-21 16:08:19 -0600128config XPS_USB_HCD_XILINX
129 bool "Use Xilinx usb host EHCI controller core"
130 depends on USB_EHCI_HCD && (PPC32 || MICROBLAZE)
131 select USB_EHCI_BIG_ENDIAN_DESC
132 select USB_EHCI_BIG_ENDIAN_MMIO
133 ---help---
134 Xilinx xps USB host controller core is EHCI compilant and has
135 transaction translator built-in. It can be configured to either
136 support both high speed and full speed devices, or high speed
137 devices only.
138
Anatolij Gustschin126512e2010-09-28 20:55:20 +0200139config USB_FSL_MPH_DR_OF
140 tristate
141
Li Yangba029782007-05-11 17:09:55 +0800142config USB_EHCI_FSL
Fabio Estevamc0ca9bc2012-02-02 14:23:34 -0200143 bool "Support for Freescale PPC on-chip EHCI USB controller"
Anton Vorontsovb5937a42008-02-21 23:30:58 +0300144 depends on USB_EHCI_HCD && FSL_SOC
Li Yangba029782007-05-11 17:09:55 +0800145 select USB_EHCI_ROOT_HUB_TT
Marc Kleine-Budde018b97d2010-10-29 11:04:49 +0200146 select USB_FSL_MPH_DR_OF if OF
Li Yangba029782007-05-11 17:09:55 +0800147 ---help---
148 Variation of ARC USB block used in some Freescale chips.
149
Daniel Mack7e8d5cd2009-10-28 01:14:59 +0100150config USB_EHCI_MXC
Alan Sterndba63b22013-01-23 13:26:15 -0500151 tristate "Support for Freescale i.MX on-chip EHCI USB controller"
Daniel Mack7e8d5cd2009-10-28 01:14:59 +0100152 depends on USB_EHCI_HCD && ARCH_MXC
153 select USB_EHCI_ROOT_HUB_TT
154 ---help---
155 Variation of ARC USB block used in some Freescale chips.
156
Keshava Munegowda7f124f42010-11-21 23:23:41 +0530157config USB_EHCI_HCD_OMAP
Alan Stern54a419662013-03-12 12:44:39 +0200158 tristate "EHCI support for OMAP3 and later chips"
Keshava Munegowda7f124f42010-11-21 23:23:41 +0530159 depends on USB_EHCI_HCD && ARCH_OMAP
Roger Quadrosdfdf9ad2013-03-12 12:44:44 +0200160 select NOP_USB_XCEIV
Keshava Munegowda7f124f42010-11-21 23:23:41 +0530161 default y
Paul Bolled132d7f2012-05-07 11:14:59 +0200162 ---help---
Keshava Munegowda7f124f42010-11-21 23:23:41 +0530163 Enables support for the on-chip EHCI controller on
164 OMAP3 and later chips.
165
Manjunath Goudara76dd462013-04-02 18:23:59 +0200166config USB_EHCI_HCD_ORION
167 tristate "Support for Marvell EBU on-chip EHCI USB controller"
168 depends on USB_EHCI_HCD && PLAT_ORION
169 default y
170 ---help---
171 Enables support for the on-chip EHCI controller on Marvell's
172 embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP,
173 Armada 370. This is different from the EHCI implementation
174 on Marvell's mobile PXA and MMP SoC, see "EHCI support for
175 Marvell PXA/MMP USB controller" for those.
176
Manjunath Goudar7675d6b2013-04-02 18:24:00 +0200177config USB_EHCI_HCD_SPEAR
178 tristate "Support for ST SPEAr on-chip EHCI USB controller"
179 depends on USB_EHCI_HCD && PLAT_SPEAR
180 default y
181 ---help---
182 Enables support for the on-chip EHCI controller on
183 ST SPEAr chips.
184
Pavankumar Kondetib0848ae2010-12-07 17:53:56 +0530185config USB_EHCI_MSM
Greg Kroah-Hartmane9a92b22013-02-20 10:25:05 -0800186 bool "Support for MSM on-chip EHCI USB controller"
Pavankumar Kondetib0848ae2010-12-07 17:53:56 +0530187 depends on USB_EHCI_HCD && ARCH_MSM
188 select USB_EHCI_ROOT_HUB_TT
Pavankumar Kondetidfb21302011-03-04 22:45:02 +0530189 select USB_MSM_OTG
Pavankumar Kondetib0848ae2010-12-07 17:53:56 +0530190 ---help---
191 Enables support for the USB Host controller present on the
192 Qualcomm chipsets. Root Hub has inbuilt TT.
193 This driver depends on OTG driver for PHY initialization,
Pavankumar Kondeti8bb6a162010-12-07 17:53:57 +0530194 clock management, powering up VBUS, and power management.
Pavankumar Kondeti8cf28f12011-02-04 10:08:18 +0530195 This driver is not supported on boards like trout which
196 has an external PHY.
Pavankumar Kondetib0848ae2010-12-07 17:53:56 +0530197
Benoit Goby79ad3b52011-03-09 16:28:56 -0800198config USB_EHCI_TEGRA
199 boolean "NVIDIA Tegra HCD support"
200 depends on USB_EHCI_HCD && ARCH_TEGRA
201 select USB_EHCI_ROOT_HUB_TT
Felipe Balbi75f32ec2013-03-20 14:18:28 +0200202 select USB_PHY
Benoit Goby79ad3b52011-03-09 16:28:56 -0800203 help
204 This driver enables support for the internal USB Host Controllers
205 found in NVIDIA Tegra SoCs. The controllers are EHCI compliant.
206
Valentine Barshakda0e8fb2007-12-30 15:28:50 -0800207config USB_EHCI_HCD_PPC_OF
208 bool "EHCI support for PPC USB controller on OF platform bus"
209 depends on USB_EHCI_HCD && PPC_OF
210 default y
211 ---help---
212 Enables support for the USB controller present on the PowerPC
213 OpenFirmware platform bus.
214
Yoshihiro Shimoda60b0bf02011-03-01 16:58:37 +0900215config USB_EHCI_SH
216 bool "EHCI support for SuperH USB controller"
217 depends on USB_EHCI_HCD && SUPERH
218 ---help---
219 Enables support for the on-chip EHCI controller on the SuperH.
220 If you use the PCI EHCI controller, this option is not necessary.
221
Joonyoung Shim1bcc5aa2011-04-08 14:08:50 +0900222config USB_EHCI_S5P
Manjunath Goudar7edb3da2013-04-02 18:24:01 +0200223 tristate "EHCI support for Samsung S5P/EXYNOS SoC Series"
Greg Kroah-Hartmane9a92b22013-02-20 10:25:05 -0800224 depends on USB_EHCI_HCD && PLAT_S5P
225 help
Manjunath Goudar7edb3da2013-04-02 18:24:01 +0200226 Enable support for the Samsung S5Pxxxx and Exynos3/4/5 SOC's
227 on-chip EHCI controller.
Joonyoung Shim1bcc5aa2011-04-08 14:08:50 +0900228
Neil Zhang3a082ec2011-12-20 13:20:23 +0800229config USB_EHCI_MV
Manjunath Goudara76dd462013-04-02 18:23:59 +0200230 bool "EHCI support for Marvell PXA/MMP USB controller"
Neil Zhanga219b662012-02-23 11:41:54 +0800231 depends on USB_EHCI_HCD && (ARCH_PXA || ARCH_MMP)
Neil Zhang3a082ec2011-12-20 13:20:23 +0800232 select USB_EHCI_ROOT_HUB_TT
233 ---help---
234 Enables support for Marvell (including PXA and MMP series) on-chip
235 USB SPH and OTG controller. SPH is a single port host, and it can
236 only be EHCI host. OTG is controller that can switch to host mode.
Manjunath Goudara76dd462013-04-02 18:23:59 +0200237 Note that this driver will not work on Marvell's other EHCI
238 controller used by the EBU-type SoCs including Orion, Kirkwood,
239 Dova, Armada 370 and Armada XP. See "Support for Marvell EBU
240 on-chip EHCI USB controller" for those.
Neil Zhang3a082ec2011-12-20 13:20:23 +0800241
Wan ZongShun586dfc82009-06-13 09:14:28 +0800242config USB_W90X900_EHCI
243 bool "W90X900(W90P910) EHCI support"
244 depends on USB_EHCI_HCD && ARCH_W90X900
245 ---help---
246 Enables support for the W90X900 USB controller
247
Mac Lin760efe62010-11-25 23:58:00 +0800248config USB_CNS3XXX_EHCI
Florian Fainellif3a958d2012-10-08 15:11:25 +0200249 bool "Cavium CNS3XXX EHCI Module (DEPRECATED)"
Mac Lin760efe62010-11-25 23:58:00 +0800250 depends on USB_EHCI_HCD && ARCH_CNS3XXX
Florian Fainellif3a958d2012-10-08 15:11:25 +0200251 select USB_EHCI_HCD_PLATFORM
Mac Lin760efe62010-11-25 23:58:00 +0800252 ---help---
Florian Fainellif3a958d2012-10-08 15:11:25 +0200253 This option is deprecated now and the driver was removed, use
254 USB_EHCI_HCD_PLATFORM instead.
255
Mac Lin760efe62010-11-25 23:58:00 +0800256 Enable support for the CNS3XXX SOC's on-chip EHCI controller.
257 It is needed for high-speed (480Mbit/sec) USB 2.0 device
258 support.
259
Gabor Juhos502fa842011-04-13 10:54:22 +0200260config USB_EHCI_ATH79
Hauke Mehrtens5d98cd42012-03-13 01:04:53 +0100261 bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)"
Gabor Juhos9d6b2042011-06-20 21:26:09 +0200262 depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X)
Gabor Juhos502fa842011-04-13 10:54:22 +0200263 select USB_EHCI_ROOT_HUB_TT
Hauke Mehrtens5d98cd42012-03-13 01:04:53 +0100264 select USB_EHCI_HCD_PLATFORM
Gabor Juhos502fa842011-04-13 10:54:22 +0200265 default y
266 ---help---
Hauke Mehrtens5d98cd42012-03-13 01:04:53 +0100267 This option is deprecated now and the driver was removed, use
268 USB_EHCI_HCD_PLATFORM instead.
269
Gabor Juhos502fa842011-04-13 10:54:22 +0200270 Enables support for the built-in EHCI controller present
271 on the Atheros AR7XXX/AR9XXX SoCs.
272
Rodolfo Giomettib92a78e2008-10-23 10:08:07 +0200273config USB_OXU210HP_HCD
274 tristate "OXU210HP HCD support"
Heiko Carstens5273afe2013-02-06 17:24:01 +0100275 depends on USB && GENERIC_HARDIRQS
Rodolfo Giomettib92a78e2008-10-23 10:08:07 +0200276 ---help---
277 The OXU210HP is an USB host/OTG/device controller. Enable this
278 option if your board has this chip. If unsure, say N.
279
280 This driver does not support isochronous transfers and doesn't
281 implement OTG nor USB device controllers.
282
283 To compile this driver as a module, choose M here: the
284 module will be called oxu210hp-hcd.
285
Olav Kongas4808a1c2005-04-09 22:57:39 +0300286config USB_ISP116X_HCD
287 tristate "ISP116X HCD support"
288 depends on USB
Olav Kongas4808a1c2005-04-09 22:57:39 +0300289 ---help---
290 The ISP1160 and ISP1161 chips are USB host controllers. Enable this
291 option if your board has this chip. If unsure, say N.
292
293 This driver does not support isochronous transfers.
294
295 To compile this driver as a module, choose M here: the
296 module will be called isp116x-hcd.
297
Sebastian Siewiordb11e472008-04-24 00:37:04 +0200298config USB_ISP1760_HCD
299 tristate "ISP 1760 HCD support"
Greg Kroah-Hartmaneb83be92012-09-14 21:15:50 -0700300 depends on USB
Sebastian Siewiordb11e472008-04-24 00:37:04 +0200301 ---help---
302 The ISP1760 chip is a USB 2.0 host controller.
303
304 This driver does not support isochronous transfers or OTG.
Sebastian Andrzej Siewiorff30bf12008-11-02 15:25:42 +0100305 This USB controller is usually attached to a non-DMA-Master
306 capable bus. NXP's eval kit brings this chip on PCI card
307 where the chip itself is behind a PLB to simulate such
308 a bus.
Sebastian Siewiordb11e472008-04-24 00:37:04 +0200309
310 To compile this driver as a module, choose M here: the
Sebastian Andrzej Siewiorff30bf12008-11-02 15:25:42 +0100311 module will be called isp1760.
Sebastian Siewiordb11e472008-04-24 00:37:04 +0200312
Lothar Wassmanna9d43092009-07-16 20:51:21 -0400313config USB_ISP1362_HCD
314 tristate "ISP1362 HCD support"
315 depends on USB
316 default N
317 ---help---
318 Supports the Philips ISP1362 chip as a host controller
319
320 This driver does not support isochronous transfers.
321
322 To compile this driver as a module, choose M here: the
323 module will be called isp1362-hcd.
324
Linus Torvalds1da177e2005-04-16 15:20:36 -0700325config USB_OHCI_HCD
326 tristate "OHCI HCD support"
327 depends on USB && USB_ARCH_HAS_OHCI
328 select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
Linus Torvalds61464c82012-10-01 18:19:05 -0700329 depends on USB_ISP1301 || !ARCH_LPC32XX
Linus Torvalds1da177e2005-04-16 15:20:36 -0700330 ---help---
331 The Open Host Controller Interface (OHCI) is a standard for accessing
332 USB 1.1 host controller hardware. It does more in hardware than Intel's
333 UHCI specification. If your USB host controller follows the OHCI spec,
334 say Y. On most non-x86 systems, and on x86 hardware that's not using a
335 USB controller from Intel or VIA, this is appropriate. If your host
336 controller doesn't use PCI, this is probably appropriate. For a PCI
337 based system where you're not sure, the "lspci -v" entry will list the
338 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
339
340 To compile this driver as a module, choose M here: the
341 module will be called ohci-hcd.
342
Anand Gadiyar968b4482010-05-10 21:56:12 +0530343config USB_OHCI_HCD_OMAP1
344 bool "OHCI support for OMAP1/2 chips"
Tony Lindgrenb924b202012-06-04 00:56:15 -0700345 depends on USB_OHCI_HCD && ARCH_OMAP1
Anand Gadiyar968b4482010-05-10 21:56:12 +0530346 default y
347 ---help---
348 Enables support for the OHCI controller on OMAP1/2 chips.
349
350config USB_OHCI_HCD_OMAP3
351 bool "OHCI support for OMAP3 and later chips"
352 depends on USB_OHCI_HCD && (ARCH_OMAP3 || ARCH_OMAP4)
353 default y
354 ---help---
355 Enables support for the on-chip OHCI controller on
356 OMAP3 and later chips.
357
Gabor Juhos90e6ca52011-04-13 10:54:24 +0200358config USB_OHCI_ATH79
Hauke Mehrtens5d98cd42012-03-13 01:04:53 +0100359 bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)"
Gabor Juhos90e6ca52011-04-13 10:54:24 +0200360 depends on USB_OHCI_HCD && (SOC_AR71XX || SOC_AR724X)
Hauke Mehrtens5d98cd42012-03-13 01:04:53 +0100361 select USB_OHCI_HCD_PLATFORM
Gabor Juhos90e6ca52011-04-13 10:54:24 +0200362 default y
363 help
Hauke Mehrtens5d98cd42012-03-13 01:04:53 +0100364 This option is deprecated now and the driver was removed, use
365 USB_OHCI_HCD_PLATFORM instead.
366
Gabor Juhos90e6ca52011-04-13 10:54:24 +0200367 Enables support for the built-in OHCI controller present on the
368 Atheros AR71XX/AR7240 SoCs.
369
Sylvain Munaut495a6782006-12-13 21:09:55 +0100370config USB_OHCI_HCD_PPC_OF_BE
Arnd Bergmann45e83882009-06-19 05:35:34 -0700371 bool "OHCI support for OF platform bus (big endian)"
372 depends on USB_OHCI_HCD && PPC_OF
Sylvain Munaut495a6782006-12-13 21:09:55 +0100373 select USB_OHCI_BIG_ENDIAN_DESC
374 select USB_OHCI_BIG_ENDIAN_MMIO
Arnd Bergmann45e83882009-06-19 05:35:34 -0700375 ---help---
376 Enables support for big-endian USB controllers present on the
377 OpenFirmware platform bus.
Sylvain Munaut495a6782006-12-13 21:09:55 +0100378
379config USB_OHCI_HCD_PPC_OF_LE
Arnd Bergmann45e83882009-06-19 05:35:34 -0700380 bool "OHCI support for OF platform bus (little endian)"
381 depends on USB_OHCI_HCD && PPC_OF
Sylvain Munaut495a6782006-12-13 21:09:55 +0100382 select USB_OHCI_LITTLE_ENDIAN
Arnd Bergmann45e83882009-06-19 05:35:34 -0700383 ---help---
384 Enables support for little-endian USB controllers present on the
385 OpenFirmware platform bus.
386
387config USB_OHCI_HCD_PPC_OF
388 bool
389 depends on USB_OHCI_HCD && PPC_OF
390 default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
Sylvain Munaut495a6782006-12-13 21:09:55 +0100391
Linus Torvalds1da177e2005-04-16 15:20:36 -0700392config USB_OHCI_HCD_PCI
393 bool "OHCI support for PCI-bus USB controllers"
Sylvain Munaut495a6782006-12-13 21:09:55 +0100394 depends on USB_OHCI_HCD && PCI && (STB03xxx || PPC_MPC52xx || USB_OHCI_HCD_PPC_OF)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700395 default y
396 select USB_OHCI_LITTLE_ENDIAN
397 ---help---
398 Enables support for PCI-bus plug-in USB controller cards.
399 If unsure, say Y.
400
Michael Bueschc604e852007-10-09 23:47:17 -0700401config USB_OHCI_HCD_SSB
Hauke Mehrtens259b83a2012-03-15 23:49:59 +0100402 bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)"
Greg Kroah-Hartmaneb83be92012-09-14 21:15:50 -0700403 depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD)
Hauke Mehrtens259b83a2012-03-15 23:49:59 +0100404 select USB_HCD_SSB
405 select USB_OHCI_HCD_PLATFORM
Michael Bueschc604e852007-10-09 23:47:17 -0700406 default n
407 ---help---
Hauke Mehrtens259b83a2012-03-15 23:49:59 +0100408 This option is deprecated now and the driver was removed, use
409 USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead.
410
Michael Bueschc604e852007-10-09 23:47:17 -0700411 Support for the Sonics Silicon Backplane (SSB) attached
412 Broadcom USB OHCI core.
413
414 This device is present in some embedded devices with
415 Broadcom based SSB bus.
416
417 If unsure, say N.
418
Yoshihiro Shimoda60b0bf02011-03-01 16:58:37 +0900419config USB_OHCI_SH
Florian Fainelli231a72e2012-10-08 15:11:37 +0200420 bool "OHCI support for SuperH USB controller (DEPRECATED)"
Yoshihiro Shimoda60b0bf02011-03-01 16:58:37 +0900421 depends on USB_OHCI_HCD && SUPERH
Florian Fainelli231a72e2012-10-08 15:11:37 +0200422 select USB_OHCI_HCD_PLATFORM
Yoshihiro Shimoda60b0bf02011-03-01 16:58:37 +0900423 ---help---
Florian Fainelli231a72e2012-10-08 15:11:37 +0200424 This option is deprecated now and the driver was removed, use
425 USB_OHCI_HCD_PLATFORM instead.
426
Yoshihiro Shimoda60b0bf02011-03-01 16:58:37 +0900427 Enables support for the on-chip OHCI controller on the SuperH.
428 If you use the PCI OHCI controller, this option is not necessary.
429
Jingoo Han62194242011-12-23 11:20:54 +0900430config USB_OHCI_EXYNOS
431 boolean "OHCI support for Samsung EXYNOS SoC Series"
432 depends on USB_OHCI_HCD && ARCH_EXYNOS
433 help
434 Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
435
Mac Lin760efe62010-11-25 23:58:00 +0800436config USB_CNS3XXX_OHCI
Florian Fainellic23920b02012-10-08 15:11:33 +0200437 bool "Cavium CNS3XXX OHCI Module (DEPRECATED)"
Mac Lin760efe62010-11-25 23:58:00 +0800438 depends on USB_OHCI_HCD && ARCH_CNS3XXX
Florian Fainellic23920b02012-10-08 15:11:33 +0200439 select USB_OHCI_HCD_PLATFORM
Mac Lin760efe62010-11-25 23:58:00 +0800440 ---help---
Florian Fainellic23920b02012-10-08 15:11:33 +0200441 This option is deprecated now and the driver was removed, use
442 USB_OHCI_HCD_PLATFORM instead.
443
Mac Lin760efe62010-11-25 23:58:00 +0800444 Enable support for the CNS3XXX SOC's on-chip OHCI controller.
445 It is needed for low-speed USB 1.0 device support.
446
Hauke Mehrtensfa3364b2012-03-13 01:04:47 +0100447config USB_OHCI_HCD_PLATFORM
448 bool "Generic OHCI driver for a platform device"
Greg Kroah-Hartmaneb83be92012-09-14 21:15:50 -0700449 depends on USB_OHCI_HCD
Hauke Mehrtensfa3364b2012-03-13 01:04:47 +0100450 default n
451 ---help---
452 Adds an OHCI host driver for a generic platform device, which
Peter Meerwald898d8282012-08-18 15:53:12 +0200453 provides a memory space and an irq.
Hauke Mehrtensfa3364b2012-03-13 01:04:47 +0100454
455 If unsure, say N.
456
Hauke Mehrtens7a7a4a592012-03-13 01:04:48 +0100457config USB_EHCI_HCD_PLATFORM
Alan Stern99f91932012-11-01 11:13:08 -0400458 tristate "Generic EHCI driver for a platform device"
Greg Kroah-Hartmaneb83be92012-09-14 21:15:50 -0700459 depends on USB_EHCI_HCD
Hauke Mehrtens7a7a4a592012-03-13 01:04:48 +0100460 default n
461 ---help---
462 Adds an EHCI host driver for a generic platform device, which
Peter Meerwald898d8282012-08-18 15:53:12 +0200463 provides a memory space and an irq.
Hauke Mehrtens7a7a4a592012-03-13 01:04:48 +0100464
465 If unsure, say N.
466
Benjamin Herrenschmidt11d1a4a2006-12-15 06:54:03 +1100467config USB_OHCI_BIG_ENDIAN_DESC
468 bool
469 depends on USB_OHCI_HCD
470 default n
471
472config USB_OHCI_BIG_ENDIAN_MMIO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700473 bool
474 depends on USB_OHCI_HCD
475 default n
476
477config USB_OHCI_LITTLE_ENDIAN
478 bool
479 depends on USB_OHCI_HCD
480 default n if STB03xxx || PPC_MPC52xx
481 default y
482
483config USB_UHCI_HCD
484 tristate "UHCI HCD (most Intel and VIA) support"
Tony Prisk100d4592012-07-21 22:58:53 +1200485 depends on USB && (PCI || SPARC_LEON || ARCH_VT8500)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700486 ---help---
487 The Universal Host Controller Interface is a standard by Intel for
488 accessing the USB hardware in the PC (which is also called the USB
489 host controller). If your USB host controller conforms to this
490 standard, you may want to say Y, but see below. All recent boards
491 with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
492 i810, i820) conform to this standard. Also all VIA PCI chipsets
493 (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
Jan Andersson3db77392011-05-06 12:00:18 +0200494 133) and LEON/GRLIB SoCs with the GRUSBHC controller.
495 If unsure, say Y.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700496
497 To compile this driver as a module, choose M here: the
498 module will be called uhci-hcd.
499
Jan Anderssond3219d12011-05-06 12:00:17 +0200500config USB_UHCI_SUPPORT_NON_PCI_HC
501 bool
502 depends on USB_UHCI_HCD
Tony Prisk100d4592012-07-21 22:58:53 +1200503 default y if (SPARC_LEON || ARCH_VT8500)
504
505config USB_UHCI_PLATFORM
506 bool "Generic UHCI Platform Driver support"
507 depends on USB_UHCI_SUPPORT_NON_PCI_HC
508 default y if ARCH_VT8500
509 ---help---
510 Enable support for generic UHCI platform devices that require no
511 additional configuration.
Jan Anderssond3219d12011-05-06 12:00:17 +0200512
Jan Andersson8452c672011-05-18 10:44:49 +0200513config USB_UHCI_BIG_ENDIAN_MMIO
514 bool
Jan Anderssonfda928a2011-05-18 10:44:53 +0200515 depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON
516 default y
Jan Andersson8452c672011-05-18 10:44:49 +0200517
Jan Andersson51e2f622011-05-18 10:44:51 +0200518config USB_UHCI_BIG_ENDIAN_DESC
519 bool
Jan Anderssonfda928a2011-05-18 10:44:53 +0200520 depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON
521 default y
Jan Andersson51e2f622011-05-18 10:44:51 +0200522
Anton Vorontsov236dd4d2009-01-10 05:03:21 +0300523config USB_FHCI_HCD
524 tristate "Freescale QE USB Host Controller support"
525 depends on USB && OF_GPIO && QE_GPIO && QUICC_ENGINE
526 select FSL_GTM
527 select QE_USB
528 help
529 This driver enables support for Freescale QE USB Host Controller
530 (as found on MPC8360 and MPC8323 processors), the driver supports
531 Full and Low Speed USB.
532
533config FHCI_DEBUG
534 bool "Freescale QE USB Host Controller debug support"
535 depends on USB_FHCI_HCD && DEBUG_FS
536 help
537 Say "y" to see some FHCI debug information and statistics
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300538 through debugfs.
Anton Vorontsov236dd4d2009-01-10 05:03:21 +0300539
Tony Olechd774efe2006-09-13 11:27:35 +0100540config USB_U132_HCD
541 tristate "Elan U132 Adapter Host Controller"
542 depends on USB && USB_FTDI_ELAN
543 default M
544 help
545 The U132 adapter is a USB to CardBus adapter specifically designed
546 for PC cards that contain an OHCI host controller. Typical PC cards
547 are the Orange Mobile 3G Option GlobeTrotter Fusion card. The U132
548 adapter will *NOT* work with PC cards that do not contain an OHCI
549 controller.
550
Matt LaPlante3cb2fcc2006-11-30 05:22:59 +0100551 For those PC cards that contain multiple OHCI controllers only the
Tony Olechd774efe2006-09-13 11:27:35 +0100552 first one is used.
553
554 The driver consists of two modules, the "ftdi-elan" module is a
555 USB client driver that interfaces to the FTDI chip within ELAN's
556 USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
557 controller driver that talks to the OHCI controller within the
558 CardBus cards that are inserted in the U132 adapter.
559
560 This driver has been tested with a CardBus OHCI USB adapter, and
561 worked with a USB PEN Drive inserted into the first USB port of
562 the PCCARD. A rather pointless thing to do, but useful for testing.
563
564 It is safe to say M here.
565
566 See also <http://www.elandigitalsystems.com/support/ufaq/u132linux.php>
567
Linus Torvalds1da177e2005-04-16 15:20:36 -0700568config USB_SL811_HCD
569 tristate "SL811HS HCD support"
570 depends on USB
Linus Torvalds1da177e2005-04-16 15:20:36 -0700571 help
572 The SL811HS is a single-port USB controller that supports either
573 host side or peripheral side roles. Enable this option if your
574 board has this chip, and you want to use it as a host controller.
575 If unsure, say N.
576
577 To compile this driver as a module, choose M here: the
578 module will be called sl811-hcd.
579
Mike Frysingerad7c56f2011-03-22 15:35:39 -0400580config USB_SL811_HCD_ISO
581 bool "partial ISO support"
582 depends on USB_SL811_HCD
583 help
584 The driver doesn't support iso_frame_desc (yet), but for some simple
585 devices that just queue one ISO frame per URB, then ISO transfers
586 "should" work using the normal urb status fields.
587
588 If unsure, say N.
589
David Brownellc6de2b62005-05-26 05:55:55 -0700590config USB_SL811_CS
591 tristate "CF/PCMCIA support for SL811HS HCD"
592 depends on USB_SL811_HCD && PCMCIA
David Brownellc6de2b62005-05-26 05:55:55 -0700593 help
594 Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC
595 REX-CFU1U CF card (often used with PDAs). If unsure, say N.
596
597 To compile this driver as a module, choose M here: the
598 module will be called "sl811_cs".
599
Yoshihiro Shimoda5d304352007-05-10 13:18:19 +0900600config USB_R8A66597_HCD
M4rkusXXLfa0de2b2007-08-10 14:53:32 -0700601 tristate "R8A66597 HCD support"
Yoshihiro Shimoda5d304352007-05-10 13:18:19 +0900602 depends on USB
603 help
604 The R8A66597 is a USB 2.0 host and peripheral controller.
605
606 Enable this option if your board has this chip, and you want
607 to use it as a host controller. If unsure, say N.
608
609 To compile this driver as a module, choose M here: the
610 module will be called r8a66597-hcd.
611
Kuninori Morimoto034d7c12011-10-10 22:07:40 -0700612config USB_RENESAS_USBHS_HCD
613 tristate "Renesas USBHS HCD support"
614 depends on USB
615 depends on USB_RENESAS_USBHS
616 help
617 The Renesas USBHS is a USB 2.0 host and peripheral controller.
618
619 Enable this option if your board has this chip, and you want
620 to use it as a host controller. If unsure, say N.
621
622 To compile this driver as a module, choose M here: the
623 module will be called renesas-usbhs.
624
David Vrabel7e6133a2008-09-17 16:34:28 +0100625config USB_WHCI_HCD
Greg Kroah-Hartmaneb83be92012-09-14 21:15:50 -0700626 tristate "Wireless USB Host Controller Interface (WHCI) driver"
Randy Dunlap36f8ecb2012-01-27 15:47:03 -0800627 depends on PCI && USB && UWB
David Vrabel7e6133a2008-09-17 16:34:28 +0100628 select USB_WUSB
629 select UWB_WHCI
630 help
631 A driver for PCI-based Wireless USB Host Controllers that are
632 compliant with the WHCI specification.
633
634 To compile this driver a module, choose M here: the module
635 will be called "whci-hcd".
Inaky Perez-Gonzalezd09318b2008-09-17 16:34:30 +0100636
637config USB_HWA_HCD
Greg Kroah-Hartmaneb83be92012-09-14 21:15:50 -0700638 tristate "Host Wire Adapter (HWA) driver"
Randy Dunlap36f8ecb2012-01-27 15:47:03 -0800639 depends on USB && UWB
Inaky Perez-Gonzalezd09318b2008-09-17 16:34:30 +0100640 select USB_WUSB
641 select UWB_HWA
642 help
643 This driver enables you to connect Wireless USB devices to
644 your system using a Host Wire Adaptor USB dongle. This is an
645 UWB Radio Controller and WUSB Host Controller connected to
646 your machine via USB (specified in WUSB1.0).
647
648 To compile this driver a module, choose M here: the module
649 will be called "hwa-hc".
Martin Fuzzey23d3e7a2009-11-21 12:14:48 +0100650
651config USB_IMX21_HCD
Sascha Hauer5de9ec42011-08-24 08:41:10 +0200652 tristate "i.MX21 HCD support"
653 depends on USB && ARM && ARCH_MXC
Martin Fuzzey23d3e7a2009-11-21 12:14:48 +0100654 help
655 This driver enables support for the on-chip USB host in the
Sascha Hauer5de9ec42011-08-24 08:41:10 +0200656 i.MX21 processor.
Martin Fuzzey23d3e7a2009-11-21 12:14:48 +0100657
658 To compile this driver as a module, choose M here: the
659 module will be called "imx21-hcd".
660
David Daney1643acc2010-10-08 14:47:52 -0700661config USB_OCTEON_EHCI
662 bool "Octeon on-chip EHCI support"
663 depends on USB && USB_EHCI_HCD && CPU_CAVIUM_OCTEON
664 default n
665 select USB_EHCI_BIG_ENDIAN_MMIO
666 help
667 Enable support for the Octeon II SOC's on-chip EHCI
668 controller. It is needed for high-speed (480Mbit/sec)
669 USB 2.0 device support. All CN6XXX based chips with USB are
670 supported.
671
672config USB_OCTEON_OHCI
673 bool "Octeon on-chip OHCI support"
674 depends on USB && USB_OHCI_HCD && CPU_CAVIUM_OCTEON
675 default USB_OCTEON_EHCI
676 select USB_OHCI_BIG_ENDIAN_MMIO
677 select USB_OHCI_LITTLE_ENDIAN
678 help
679 Enable support for the Octeon II SOC's on-chip OHCI
680 controller. It is needed for low-speed USB 1.0 device
681 support. All CN6XXX based chips with USB are supported.
682
683config USB_OCTEON2_COMMON
684 bool
685 default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI
Hauke Mehrtens62e11d12012-03-15 23:49:57 +0100686
687config USB_HCD_BCMA
688 tristate "BCMA usb host driver"
Greg Kroah-Hartmaneb83be92012-09-14 21:15:50 -0700689 depends on BCMA
Hauke Mehrtens62e11d12012-03-15 23:49:57 +0100690 select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
691 select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
692 help
Jesper Dangaard Brouer71c421d2012-06-15 12:01:33 +0200693 Enable support for the EHCI and OCHI host controller on an bcma bus.
Hauke Mehrtens62e11d12012-03-15 23:49:57 +0100694 It converts the bcma driver into two platform device drivers
695 for ehci and ohci.
696
697 If unsure, say N.
Hauke Mehrtens7043c2c2012-03-15 23:49:58 +0100698
699config USB_HCD_SSB
700 tristate "SSB usb host driver"
Greg Kroah-Hartmaneb83be92012-09-14 21:15:50 -0700701 depends on SSB
Hauke Mehrtens7043c2c2012-03-15 23:49:58 +0100702 select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
703 select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
704 help
Jesper Dangaard Brouer71c421d2012-06-15 12:01:33 +0200705 Enable support for the EHCI and OCHI host controller on an bcma bus.
Hauke Mehrtens7043c2c2012-03-15 23:49:58 +0100706 It converts the bcma driver into two platform device drivers
707 for ehci and ohci.
708
709 If unsure, say N.