blob: 0b541cdf9b8e69f238c2f7fcd5eadebe644ec3e3 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Input misc drivers configuration
3#
4menuconfig INPUT_MISC
5 bool "Miscellaneous devices"
6 help
7 Say Y here, and a list of miscellaneous input drivers will be displayed.
8 Everything that didn't fit into the other categories is here. This option
9 doesn't affect the kernel.
10
11 If unsure, say Y.
12
13if INPUT_MISC
14
Haojian Zhuang69854032010-02-03 15:40:59 -050015config INPUT_88PM860X_ONKEY
16 tristate "88PM860x ONKEY support"
17 depends on MFD_88PM860X
18 help
19 Support the ONKEY of Marvell 88PM860x PMICs as an input device
20 reporting power button status.
21
22 To compile this driver as a module, choose M here: the module
23 will be called 88pm860x_onkey.
24
Qiao Zhou96c905f2012-07-17 15:17:39 +080025config INPUT_88PM80X_ONKEY
26 tristate "88PM80x ONKEY support"
27 depends on MFD_88PM800
28 help
29 Support the ONKEY of Marvell 88PM80x PMICs as an input device
30 reporting power button status.
31
32 To compile this driver as a module, choose M here: the module
33 will be called 88pm80x_onkey.
34
Sundar R Iyer77686512010-09-05 12:18:47 -070035config INPUT_AB8500_PONKEY
36 tristate "AB8500 Pon (PowerOn) Key"
37 depends on AB8500_CORE
38 help
39 Say Y here to use the PowerOn Key for ST-Ericsson's AB8500
40 Mix-Sig PMIC.
41
42 To compile this driver as a module, choose M here: the module
43 will be called ab8500-ponkey.
44
Bryan Wu31a62962010-03-21 23:23:24 -070045config INPUT_AD714X
46 tristate "Analog Devices AD714x Capacitance Touch Sensor"
47 help
Barry Song6c04d7b2010-03-21 23:23:29 -070048 Say Y here if you want to support an AD7142/3/7/8/7A touch sensor.
Bryan Wu31a62962010-03-21 23:23:24 -070049
50 You should select a bus connection too.
51
52 To compile this driver as a module, choose M here: the
53 module will be called ad714x.
54
55config INPUT_AD714X_I2C
56 tristate "support I2C bus connection"
57 depends on INPUT_AD714X && I2C
58 default y
59 help
60 Say Y here if you have AD7142/AD7147 hooked to an I2C bus.
61
62 To compile this driver as a module, choose M here: the
63 module will be called ad714x-i2c.
64
65config INPUT_AD714X_SPI
66 tristate "support SPI bus connection"
67 depends on INPUT_AD714X && SPI
68 default y
69 help
70 Say Y here if you have AD7142/AD7147 hooked to a SPI bus.
71
72 To compile this driver as a module, choose M here: the
73 module will be called ad714x-spi.
74
Mark Brown9dd555e2012-11-26 21:17:21 +000075config INPUT_ARIZONA_HAPTICS
76 tristate "Arizona haptics support"
77 depends on MFD_ARIZONA && SND_SOC
78 select INPUT_FF_MEMLESS
79 help
80 Say Y to enable support for the haptics module in Arizona CODECs.
81
82 To compile this driver as a module, choose M here: the
83 module will be called arizona-haptics.
84
Eric Anderssonc17ca3f2011-08-09 00:06:37 -070085config INPUT_BMA150
86 tristate "BMA150/SMB380 acceleration sensor support"
87 depends on I2C
88 select INPUT_POLLDEV
89 help
90 Say Y here if you have Bosch Sensortec's BMA150 or SMB380
91 acceleration sensor hooked to an I2C bus.
92
93 To compile this driver as a module, choose M here: the
94 module will be called bma150.
95
Linus Torvalds1da177e2005-04-16 15:20:36 -070096config INPUT_PCSPKR
97 tristate "PC Speaker support"
Stas Sergeeve5e1d3c2008-05-07 12:39:56 +020098 depends on PCSPKR_PLATFORM
Linus Torvalds1da177e2005-04-16 15:20:36 -070099 help
100 Say Y here if you want the standard PC Speaker to be used for
101 bells and whistles.
102
103 If unsure, say Y.
104
105 To compile this driver as a module, choose M here: the
106 module will be called pcspkr.
107
Amy Maloche11205bb2011-08-01 23:41:44 -0700108config INPUT_PM8XXX_VIBRATOR
109 tristate "Qualcomm PM8XXX vibrator support"
110 depends on MFD_PM8XXX
111 select INPUT_FF_MEMLESS
112 help
113 This option enables device driver support for the vibrator
114 on Qualcomm PM8xxx chip. This driver supports ff-memless interface
115 from input framework.
116
117 To compile this driver as module, choose M here: the
118 module will be called pm8xxx-vibrator.
119
120config INPUT_PMIC8XXX_PWRKEY
121 tristate "PMIC8XXX power key support"
122 depends on MFD_PM8XXX
123 help
124 Say Y here if you want support for the PMIC8XXX power key.
125
126 If unsure, say N.
127
128 To compile this driver as a module, choose M here: the
129 module will be called pmic8xxx-pwrkey.
130
Linus Torvalds1da177e2005-04-16 15:20:36 -0700131config INPUT_SPARCSPKR
132 tristate "SPARC Speaker support"
David S. Millera2bd4fd2006-06-23 01:44:10 -0700133 depends on PCI && SPARC64
Linus Torvalds1da177e2005-04-16 15:20:36 -0700134 help
135 Say Y here if you want the standard Speaker on Sparc PCI systems
136 to be used for bells and whistles.
137
138 If unsure, say Y.
139
140 To compile this driver as a module, choose M here: the
141 module will be called sparcspkr.
142
143config INPUT_M68K_BEEP
144 tristate "M68k Beeper support"
145 depends on M68K
146
Haojian Zhuang37345742010-05-22 00:57:26 -0700147config INPUT_MAX8925_ONKEY
148 tristate "MAX8925 ONKEY support"
149 depends on MFD_MAX8925
150 help
151 Support the ONKEY of MAX8925 PMICs as an input device
152 reporting power button status.
153
154 To compile this driver as a module, choose M here: the module
155 will be called max8925_onkey.
156
Donggeun Kim104594b02012-03-16 12:28:22 -0700157config INPUT_MAX8997_HAPTIC
158 tristate "MAXIM MAX8997 haptic controller support"
159 depends on HAVE_PWM && MFD_MAX8997
160 select INPUT_FF_MEMLESS
161 help
162 This option enables device driver support for the haptic controller
163 on MAXIM MAX8997 chip. This driver supports ff-memless interface
164 from input framework.
165
166 To compile this driver as module, choose M here: the
167 module will be called max8997-haptic.
168
Philippe Rétornaz30fc7ac2011-09-18 18:10:53 +0200169config INPUT_MC13783_PWRBUTTON
170 tristate "MC13783 ON buttons"
171 depends on MFD_MC13783
172 help
173 Support the ON buttons of MC13783 PMIC as an input device
174 reporting power button status.
175
176 To compile this driver as a module, choose M here: the module
177 will be called mc13783-pwrbutton.
178
Eric Miao3ead8b52011-06-22 01:02:50 -0700179config INPUT_MMA8450
180 tristate "MMA8450 - Freescale's 3-Axis, 8/12-bit Digital Accelerometer"
181 depends on I2C
182 select INPUT_POLLDEV
183 help
184 Say Y here if you want to support Freescale's MMA8450 Accelerometer
185 through I2C interface.
186
187 To compile this driver as a module, choose M here: the
188 module will be called mma8450.
189
Joseph Lai631b16e2011-06-27 13:26:53 -0700190config INPUT_MPU3050
191 tristate "MPU3050 Triaxial gyroscope sensor"
192 depends on I2C
193 help
194 Say Y here if you want to support InvenSense MPU3050
195 connected via an I2C bus.
196
197 To compile this driver as a module, choose M here: the
198 module will be called mpu3050.
199
Stephen Hemminger52fe0cd2007-12-14 11:08:37 -0500200config INPUT_APANEL
201 tristate "Fujitsu Lifebook Application Panel buttons"
Randy Dunlap19131302008-03-04 14:29:43 -0800202 depends on X86 && I2C && LEDS_CLASS
Stephen Hemminger52fe0cd2007-12-14 11:08:37 -0500203 select INPUT_POLLDEV
204 select CHECK_SIGNATURE
205 help
206 Say Y here for support of the Application Panel buttons, used on
207 Fujitsu Lifebook. These are attached to the mainboard through
Randy Dunlap19131302008-03-04 14:29:43 -0800208 an SMBus interface managed by the I2C Intel ICH (i801) driver,
209 which you should also build for this kernel.
Stephen Hemminger52fe0cd2007-12-14 11:08:37 -0500210
211 To compile this driver as a module, choose M here: the module will
212 be called apanel.
213
Courtney Cavinff803ed2011-12-11 23:38:27 -0800214config INPUT_GP2A
215 tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver"
216 depends on I2C
Alexandre Courbot76ec9d12013-03-28 04:34:56 -0700217 depends on GPIOLIB
Courtney Cavinff803ed2011-12-11 23:38:27 -0800218 help
219 Say Y here if you have a Sharp GP2AP002A00F proximity/als combo-chip
220 hooked to an I2C bus.
221
222 To compile this driver as a module, choose M here: the
223 module will be called gp2ap002a00f.
224
Heiko Stübner3bfd5c52011-11-29 11:04:09 -0800225config INPUT_GPIO_TILT_POLLED
226 tristate "Polled GPIO tilt switch"
Alexandre Courbot76ec9d12013-03-28 04:34:56 -0700227 depends on GPIOLIB
Heiko Stübner3bfd5c52011-11-29 11:04:09 -0800228 select INPUT_POLLDEV
229 help
230 This driver implements support for tilt switches connected
231 to GPIO pins that are not capable of generating interrupts.
232
233 The list of gpios to use and the mapping of their states
234 to specific angles is done via platform data.
235
236 To compile this driver as a module, choose M here: the
237 module will be called gpio_tilt_polled.
238
Dmitry Torokhovba0acb52007-05-07 17:31:32 -0400239config INPUT_IXP4XX_BEEPER
240 tristate "IXP4XX Beeper support"
241 depends on ARCH_IXP4XX
242 help
243 If you say yes here, you can connect a beeper to the
244 ixp4xx gpio pins. This is used by the LinkSys NSLU2.
245
246 If unsure, say Y.
247
248 To compile this driver as a module, choose M here: the
249 module will be called ixp4xx-beeper.
250
Yoichi Yuasabebb8a22007-02-18 01:50:18 -0500251config INPUT_COBALT_BTNS
252 tristate "Cobalt button interface"
253 depends on MIPS_COBALT
Dmitry Torokhov3d29cdf2007-04-29 23:43:06 -0400254 select INPUT_POLLDEV
Yoichi Yuasabebb8a22007-02-18 01:50:18 -0500255 help
256 Say Y here if you want to support MIPS Cobalt button interface.
257
258 To compile this driver as a module, choose M here: the
259 module will be called cobalt_btns.
260
Dmitry Torokhov5fc146802005-11-20 00:50:06 -0500261config INPUT_WISTRON_BTNS
262 tristate "x86 Wistron laptop button interface"
Andrew Mortone9fb0282005-11-20 00:50:21 -0500263 depends on X86 && !X86_64
Dmitry Torokhovc2554c92007-05-22 23:48:39 -0400264 select INPUT_POLLDEV
Dmitry Torokhove97af4c2009-12-04 10:22:24 -0800265 select INPUT_SPARSEKMAP
Eric Piel389679d2007-05-21 00:46:31 -0400266 select NEW_LEDS
267 select LEDS_CLASS
Geert Uytterhoeven928923c2007-08-22 14:01:36 -0700268 select CHECK_SIGNATURE
Dmitry Torokhov5fc146802005-11-20 00:50:06 -0500269 help
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200270 Say Y here for support of Wistron laptop button interfaces, used on
Eric Piel389679d2007-05-21 00:46:31 -0400271 laptops of various brands, including Acer and Fujitsu-Siemens. If
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200272 available, mail and wifi LEDs will be controllable via /sys/class/leds.
Dmitry Torokhov5fc146802005-11-20 00:50:06 -0500273
274 To compile this driver as a module, choose M here: the module will
275 be called wistron_btns.
276
Jaya Kumar31ea7ff2007-02-10 01:29:00 -0500277config INPUT_ATLAS_BTNS
278 tristate "x86 Atlas button interface"
279 depends on X86 && ACPI
280 help
281 Say Y here for support of Atlas wallmount touchscreen buttons.
282 The events will show up as scancodes F1 through F9 via evdev.
283
284 To compile this driver as a module, choose M here: the module will
285 be called atlas_btns.
286
Dmitry Torokhovba0acb52007-05-07 17:31:32 -0400287config INPUT_ATI_REMOTE2
288 tristate "ATI / Philips USB RF remote control"
Al Viro7a86ede2007-05-15 20:36:20 +0100289 depends on USB_ARCH_HAS_HCD
Dmitry Torokhovba0acb52007-05-07 17:31:32 -0400290 select USB
291 help
292 Say Y here if you want to use an ATI or Philips USB RF remote control.
293 These are RF remotes with USB receivers.
294 ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards
295 and is also available as a separate product.
296 This driver provides mouse pointer, left and right mouse buttons,
297 and maps all the other remote buttons to keypress events.
298
299 To compile this driver as a module, choose M here: the module will be
300 called ati_remote2.
301
302config INPUT_KEYSPAN_REMOTE
Kees Cooke52278a2012-10-24 23:53:02 -0700303 tristate "Keyspan DMR USB remote control"
Al Viro7a86ede2007-05-15 20:36:20 +0100304 depends on USB_ARCH_HAS_HCD
Dmitry Torokhovba0acb52007-05-07 17:31:32 -0400305 select USB
306 help
307 Say Y here if you want to use a Keyspan DMR USB remote control.
308 Currently only the UIA-11 type of receiver has been tested. The tag
309 on the receiver that connects to the USB port should have a P/N that
310 will tell you what type of DMR you have. The UIA-10 type is not
311 supported at this time. This driver maps all buttons to keypress
312 events.
313
314 To compile this driver as a module, choose M here: the module will
315 be called keyspan_remote.
316
Chris Hudsone8e70d82011-07-06 18:36:51 -0700317config INPUT_KXTJ9
318 tristate "Kionix KXTJ9 tri-axis digital accelerometer"
319 depends on I2C
320 help
321 Say Y here to enable support for the Kionix KXTJ9 digital tri-axis
322 accelerometer.
323
324 To compile this driver as a module, choose M here: the module will
325 be called kxtj9.
326
327config INPUT_KXTJ9_POLLED_MODE
328 bool "Enable polling mode support"
329 depends on INPUT_KXTJ9
330 select INPUT_POLLDEV
331 help
332 Say Y here if you need accelerometer to work in polling mode.
333
Dmitry Torokhovba0acb52007-05-07 17:31:32 -0400334config INPUT_POWERMATE
335 tristate "Griffin PowerMate and Contour Jog support"
Al Viro7a86ede2007-05-15 20:36:20 +0100336 depends on USB_ARCH_HAS_HCD
Dmitry Torokhovba0acb52007-05-07 17:31:32 -0400337 select USB
338 help
339 Say Y here if you want to use Griffin PowerMate or Contour Jog devices.
340 These are aluminum dials which can measure clockwise and anticlockwise
341 rotation. The dial also acts as a pushbutton. The base contains an LED
342 which can be instructed to pulse or to switch to a particular intensity.
343
344 You can download userspace tools from
345 <http://sowerbutts.com/powermate/>.
Alessandro Zummo01387952006-01-29 21:50:40 -0500346
347 To compile this driver as a module, choose M here: the
Dmitry Torokhovba0acb52007-05-07 17:31:32 -0400348 module will be called powermate.
349
350config INPUT_YEALINK
351 tristate "Yealink usb-p1k voip phone"
Al Viro7a86ede2007-05-15 20:36:20 +0100352 depends on USB_ARCH_HAS_HCD
Dmitry Torokhovba0acb52007-05-07 17:31:32 -0400353 select USB
354 help
355 Say Y here if you want to enable keyboard and LCD functions of the
356 Yealink usb-p1k usb phones. The audio part is enabled by the generic
357 usb sound driver, so you might want to enable that as well.
358
359 For information about how to use these additional functions, see
360 <file:Documentation/input/yealink.txt>.
361
362 To compile this driver as a module, choose M here: the module will be
363 called yealink.
Alessandro Zummo01387952006-01-29 21:50:40 -0500364
Alfred E. Heggestadc04148f2008-08-08 11:49:08 -0400365config INPUT_CM109
366 tristate "C-Media CM109 USB I/O Controller"
Alfred E. Heggestadc04148f2008-08-08 11:49:08 -0400367 depends on USB_ARCH_HAS_HCD
368 select USB
369 help
370 Say Y here if you want to enable keyboard and buzzer functions of the
371 C-Media CM109 usb phones. The audio part is enabled by the generic
372 usb sound driver, so you might want to enable that as well.
373
374 To compile this driver as a module, choose M here: the module will be
375 called cm109.
376
Aaro Koskinen544a46c2012-11-10 00:50:25 -0800377config INPUT_RETU_PWRBUTTON
378 tristate "Retu Power button Driver"
379 depends on MFD_RETU
380 help
381 Say Y here if you want to enable power key reporting via the
382 Retu chips found in Nokia Internet Tablets (770, N800, N810).
383
384 To compile this driver as a module, choose M here. The module will
385 be called retu-pwrbutton.
386
Felipe Balbi68d8bf02009-04-19 23:07:50 -0700387config INPUT_TWL4030_PWRBUTTON
388 tristate "TWL4030 Power button Driver"
389 depends on TWL4030_CORE
390 help
391 Say Y here if you want to enable power key reporting via the
392 TWL4030 family of chips.
393
394 To compile this driver as a module, choose M here. The module will
395 be called twl4030_pwrbutton.
396
Jari Vanhala3dd1b392010-03-09 00:29:46 -0800397config INPUT_TWL4030_VIBRA
398 tristate "Support for TWL4030 Vibrator"
399 depends on TWL4030_CORE
Peter Ujfalusi57fe7252011-05-31 12:02:49 +0300400 select MFD_TWL4030_AUDIO
Jari Vanhala3dd1b392010-03-09 00:29:46 -0800401 select INPUT_FF_MEMLESS
402 help
403 This option enables support for TWL4030 Vibrator Driver.
404
405 To compile this driver as a module, choose M here. The module will
406 be called twl4030_vibra.
407
Misael Lopez Cruzcc697d382011-05-01 03:51:24 -0500408config INPUT_TWL6040_VIBRA
409 tristate "Support for TWL6040 Vibrator"
Peter Ujfalusi8eaeb932012-04-03 11:56:51 +0300410 depends on TWL6040_CORE
Misael Lopez Cruzcc697d382011-05-01 03:51:24 -0500411 select INPUT_FF_MEMLESS
412 help
413 This option enables support for TWL6040 Vibrator Driver.
414
415 To compile this driver as a module, choose M here. The module will
416 be called twl6040_vibra.
417
Linus Torvalds1da177e2005-04-16 15:20:36 -0700418config INPUT_UINPUT
419 tristate "User level driver support"
420 help
421 Say Y here if you want to support user level drivers for input
422 subsystem accessible under char device 10:223 - /dev/input/uinput.
423
424 To compile this driver as a module, choose M here: the
425 module will be called uinput.
426
Thomas Bogendoerfer48ad88b2008-07-19 00:14:26 -0400427config INPUT_SGI_BTNS
428 tristate "SGI Indy/O2 volume button interface"
429 depends on SGI_IP22 || SGI_IP32
Thomas Bogendoerfer3bee2a02008-07-07 09:07:31 -0400430 select INPUT_POLLDEV
431 help
Thomas Bogendoerfer48ad88b2008-07-19 00:14:26 -0400432 Say Y here if you want to support SGI Indy/O2 volume button interface.
Thomas Bogendoerfer3bee2a02008-07-07 09:07:31 -0400433
434 To compile this driver as a module, choose M here: the
Thomas Bogendoerfer48ad88b2008-07-19 00:14:26 -0400435 module will be called sgi_btns.
Thomas Bogendoerfer3bee2a02008-07-07 09:07:31 -0400436
Linus Torvalds1da177e2005-04-16 15:20:36 -0700437config HP_SDC_RTC
Yoichi Yuasabebb8a22007-02-18 01:50:18 -0500438 tristate "HP SDC Real Time Clock"
Alexander Beregalovd061ebd2009-04-11 16:55:41 -0700439 depends on (GSC || HP300) && SERIO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700440 select HP_SDC
441 help
442 Say Y here if you want to support the built-in real time clock
443 of the HP SDC controller.
444
Balaji Rao1851b062009-01-09 01:50:58 +0100445config INPUT_PCF50633_PMU
446 tristate "PCF50633 PMU events"
447 depends on MFD_PCF50633
448 help
449 Say Y to include support for delivering PMU events via input
450 layer on NXP PCF50633.
451
Bryan Wub91c4be2010-03-19 22:18:15 -0700452config INPUT_PCF8574
453 tristate "PCF8574 Keypad input device"
Kees Cooke52278a2012-10-24 23:53:02 -0700454 depends on I2C
Bryan Wub91c4be2010-03-19 22:18:15 -0700455 help
Masanari Iida393f9ff2012-01-31 00:07:33 -0800456 Say Y here if you want to support a keypad connected via I2C
Bryan Wub91c4be2010-03-19 22:18:15 -0700457 with a PCF8574.
458
459 To compile this driver as a module, choose M here: the
460 module will be called pcf8574_keypad.
461
Lars-Peter Clausene22739d2010-07-14 00:25:21 -0700462config INPUT_PWM_BEEPER
463 tristate "PWM beeper support"
Sascha Hauerd56a2892012-11-03 12:05:52 -0700464 depends on HAVE_PWM || PWM
Lars-Peter Clausene22739d2010-07-14 00:25:21 -0700465 help
466 Say Y here to get support for PWM based beeper devices.
467
468 If unsure, say N.
469
470 To compile this driver as a module, choose M here: the module will be
471 called pwm-beeper.
472
Daniel Mack73969ff2009-03-04 23:27:14 -0800473config INPUT_GPIO_ROTARY_ENCODER
474 tristate "Rotary encoders connected to GPIO pins"
Alexandre Courbot76ec9d12013-03-28 04:34:56 -0700475 depends on GPIOLIB
Daniel Mack73969ff2009-03-04 23:27:14 -0800476 help
477 Say Y here to add support for rotary encoders connected to GPIO lines.
Alessio Igor Bogani492d0f92009-05-21 19:54:33 +0200478 Check file:Documentation/input/rotary-encoder.txt for more
Daniel Mack73969ff2009-03-04 23:27:14 -0800479 information.
480
481 To compile this driver as a module, choose M here: the
482 module will be called rotary_encoder.
483
Phil Sutterd9bdffd2009-03-04 23:27:15 -0800484config INPUT_RB532_BUTTON
485 tristate "Mikrotik Routerboard 532 button interface"
486 depends on MIKROTIK_RB532
Alexandre Courbot76ec9d12013-03-28 04:34:56 -0700487 depends on GPIOLIB
Phil Sutterd9bdffd2009-03-04 23:27:15 -0800488 select INPUT_POLLDEV
489 help
490 Say Y here if you want support for the S1 button built into
491 Mikrotik's Routerboard 532.
492
493 To compile this driver as a module, choose M here: the
494 module will be called rb532_button.
495
Ashish Jangamf0c5f652012-03-04 08:40:58 -0800496config INPUT_DA9052_ONKEY
497 tristate "Dialog DA9052/DA9053 Onkey"
498 depends on PMIC_DA9052
499 help
500 Support the ONKEY of Dialog DA9052 PMICs as an input device
501 reporting power button status.
502
503 To compile this driver as a module, choose M here: the
504 module will be called da9052_onkey.
505
Ashish Jangam8ed27572012-10-30 00:27:25 -0700506config INPUT_DA9055_ONKEY
507 tristate "Dialog Semiconductor DA9055 ONKEY"
508 depends on MFD_DA9055
509 help
510 Support the ONKEY of DA9055 PMICs as an input device
511 reporting power button status.
512
513 To compile this driver as a module, choose M here: the module
514 will be called da9055_onkey.
515
David Brownelleb990b52009-04-23 19:25:29 -0700516config INPUT_DM355EVM
517 tristate "TI DaVinci DM355 EVM Keypad and IR Remote"
518 depends on MFD_DM355EVM_MSP
Dmitry Torokhov66040722009-12-04 10:22:25 -0800519 select INPUT_SPARSEKMAP
David Brownelleb990b52009-04-23 19:25:29 -0700520 help
521 Supports the pushbuttons and IR remote used with
522 the DM355 EVM board.
523
524 To compile this driver as a module, choose M here: the
525 module will be called dm355evm_keys.
Michael Hennerich48329582009-07-22 21:51:34 -0700526
527config INPUT_BFIN_ROTARY
528 tristate "Blackfin Rotary support"
529 depends on BF54x || BF52x
530 help
531 Say Y here if you want to use the Blackfin Rotary.
532
533 To compile this driver as a module, choose M here: the
534 module will be called bfin-rotary.
535
Mark Brown0c73b992009-09-15 12:07:12 +0200536config INPUT_WM831X_ON
537 tristate "WM831X ON pin"
538 depends on MFD_WM831X
539 help
540 Support the ON pin of WM831X PMICs as an input device
541 reporting power button status.
542
543 To compile this driver as a module, choose M here: the module
544 will be called wm831x_on.
545
Daniel Ribeirod0a82132009-08-10 20:27:48 +0200546config INPUT_PCAP
547 tristate "Motorola EZX PCAP misc input events"
548 depends on EZX_PCAP
549 help
550 Say Y here if you want to use Power key and Headphone button
551 on Motorola EZX phones.
552
553 To compile this driver as a module, choose M here: the
554 module will be called pcap_keys.
555
Michael Henneriche27c7292010-06-25 08:44:10 -0700556config INPUT_ADXL34X
557 tristate "Analog Devices ADXL34x Three-Axis Digital Accelerometer"
558 default n
559 help
560 Say Y here if you have a Accelerometer interface using the
561 ADXL345/6 controller, and your board-specific initialization
562 code includes that in its table of devices.
563
564 This driver can use either I2C or SPI communication to the
565 ADXL345/6 controller. Select the appropriate method for
566 your system.
567
568 If unsure, say N (but it's safe to say "Y").
569
570 To compile this driver as a module, choose M here: the
571 module will be called adxl34x.
572
573config INPUT_ADXL34X_I2C
574 tristate "support I2C bus connection"
575 depends on INPUT_ADXL34X && I2C
576 default y
577 help
578 Say Y here if you have ADXL345/6 hooked to an I2C bus.
579
580 To compile this driver as a module, choose M here: the
581 module will be called adxl34x-i2c.
582
583config INPUT_ADXL34X_SPI
584 tristate "support SPI bus connection"
585 depends on INPUT_ADXL34X && SPI
586 default y
587 help
588 Say Y here if you have ADXL345/6 hooked to a SPI bus.
589
590 To compile this driver as a module, choose M here: the
591 module will be called adxl34x-spi.
592
Dmitry Torokhov628329d2013-02-02 11:26:13 -0800593config INPUT_IMS_PCU
594 tristate "IMS Passenger Control Unit driver"
595 depends on USB
596 depends on LEDS_CLASS
597 help
598 Say Y here if you have system with IMS Rave Passenger Control Unit.
599
600 To compile this driver as a module, choose M here: the module will be
601 called ims_pcu.
602
Hemanth Vb029ffa2010-11-30 23:03:54 -0800603config INPUT_CMA3000
604 tristate "VTI CMA3000 Tri-axis accelerometer"
605 help
606 Say Y here if you want to use VTI CMA3000_D0x Accelerometer
607 driver
608
609 This driver currently only supports I2C interface to the
610 controller. Also select the I2C method.
611
612 If unsure, say N
613
614 To compile this driver as a module, choose M here: the
615 module will be called cma3000_d0x.
616
617config INPUT_CMA3000_I2C
618 tristate "Support I2C bus connection"
619 depends on INPUT_CMA3000 && I2C
620 help
621 Say Y here if you want to use VTI CMA3000_D0x Accelerometer
622 through I2C interface.
623
624 To compile this driver as a module, choose M here: the
625 module will be called cma3000_d0x_i2c.
626
Dmitry Torokhov49851ca2011-03-16 22:56:03 -0700627config INPUT_XEN_KBDDEV_FRONTEND
628 tristate "Xen virtual keyboard and mouse support"
Andrew Jones4bc25af2012-01-06 10:43:09 +0100629 depends on XEN
Dmitry Torokhov49851ca2011-03-16 22:56:03 -0700630 default y
631 select XEN_XENBUS_FRONTEND
632 help
633 This driver implements the front-end of the Xen virtual
634 keyboard and mouse device driver. It communicates with a back-end
635 in another domain.
636
637 To compile this driver as a module, choose M here: the
638 module will be called xen-kbdfront.
639
Binghua Duan9b5f9532013-06-02 23:38:46 -0700640config INPUT_SIRFSOC_ONKEY
641 bool "CSR SiRFSoC power on/off/suspend key support"
642 depends on ARCH_SIRF && OF
643 default y
644 help
645 Say Y here if you want to support for the SiRFSoC power on/off/suspend key
646 in Linux, after you press the onkey, system will suspend.
647
648 If unsure, say N.
649
Linus Torvalds1da177e2005-04-16 15:20:36 -0700650endif