blob: db58125331dad5d3788d5b3774a34f1637c893df [file] [log] [blame]
Robert Jarzmikd75379a2008-04-18 15:56:49 -07001/*
2 * linux/drivers/usb/gadget/pxa27x_udc.h
3 * Intel PXA27x on-chip full speed USB device controller
4 *
5 * Inspired by original driver by Frank Becker, David Brownell, and others.
6 * Copyright (C) 2008 Robert Jarzmik
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
21 */
22
23#ifndef __LINUX_USB_GADGET_PXA27X_H
24#define __LINUX_USB_GADGET_PXA27X_H
25
26#include <linux/types.h>
27#include <linux/spinlock.h>
28#include <linux/io.h>
Robert Jarzmik7fec3c22009-01-24 23:57:30 -080029#include <linux/usb/otg.h>
Robert Jarzmikd75379a2008-04-18 15:56:49 -070030
31/*
32 * Register definitions
33 */
34/* Offsets */
35#define UDCCR 0x0000 /* UDC Control Register */
36#define UDCICR0 0x0004 /* UDC Interrupt Control Register0 */
37#define UDCICR1 0x0008 /* UDC Interrupt Control Register1 */
38#define UDCISR0 0x000C /* UDC Interrupt Status Register 0 */
39#define UDCISR1 0x0010 /* UDC Interrupt Status Register 1 */
40#define UDCFNR 0x0014 /* UDC Frame Number Register */
41#define UDCOTGICR 0x0018 /* UDC On-The-Go interrupt control */
42#define UP2OCR 0x0020 /* USB Port 2 Output Control register */
43#define UP3OCR 0x0024 /* USB Port 3 Output Control register */
44#define UDCCSRn(x) (0x0100 + ((x)<<2)) /* UDC Control/Status register */
45#define UDCBCRn(x) (0x0200 + ((x)<<2)) /* UDC Byte Count Register */
46#define UDCDRn(x) (0x0300 + ((x)<<2)) /* UDC Data Register */
47#define UDCCRn(x) (0x0400 + ((x)<<2)) /* UDC Control Register */
48
49#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */
50#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation
51 Protocol Port Support */
52#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol
53 Support */
54#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol
55 Enable */
56#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */
57#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */
58#define UDCCR_ACN_S 11
59#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */
60#define UDCCR_AIN_S 8
61#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface
62 Setting Number */
63#define UDCCR_AAISN_S 5
64#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active
65 Configuration */
66#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration
67 Error */
68#define UDCCR_UDR (1 << 2) /* UDC Resume */
69#define UDCCR_UDA (1 << 1) /* UDC Active */
70#define UDCCR_UDE (1 << 0) /* UDC Enable */
71
72#define UDCICR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
73#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */
74#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */
75#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */
76#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */
77#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */
78#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */
79#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */
80#define UDCICR_INT_MASK (UDCICR_FIFOERR | UDCICR_PKTCOMPL)
81
82#define UDCISR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
83#define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */
84#define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */
85#define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */
86#define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */
87#define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */
88#define UDCISR_INT_MASK (UDCICR_FIFOERR | UDCICR_PKTCOMPL)
89
90#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */
91#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt
92 Rising Edge Interrupt Enable */
93#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt
94 Falling Edge Interrupt Enable */
95#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge
96 Interrupt Enable */
97#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge
98 Interrupt Enable */
99#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge
100 Interrupt Enable */
101#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge
102 Interrupt Enable */
103#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge
104 Interrupt Enable */
105#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge
106 Interrupt Enable */
107#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising
108 Edge Interrupt Enable */
109#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling
110 Edge Interrupt Enable */
111#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge
112 Interrupt Enable */
113#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge
114 Interrupt Enable */
115
116/* Host Port 2 field bits */
117#define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */
118#define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */
119 /* Transceiver enablers */
120#define UP2OCR_DPPDE (1 << 2) /* D+ Pull Down Enable */
121#define UP2OCR_DMPDE (1 << 3) /* D- Pull Down Enable */
122#define UP2OCR_DPPUE (1 << 4) /* D+ Pull Up Enable */
123#define UP2OCR_DMPUE (1 << 5) /* D- Pull Up Enable */
124#define UP2OCR_DPPUBE (1 << 6) /* D+ Pull Up Bypass Enable */
125#define UP2OCR_DMPUBE (1 << 7) /* D- Pull Up Bypass Enable */
126#define UP2OCR_EXSP (1 << 8) /* External Transceiver Speed Control */
127#define UP2OCR_EXSUS (1 << 9) /* External Transceiver Speed Enable */
128#define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */
129#define UP2OCR_HXS (1 << 16) /* Transceiver Output Select */
130#define UP2OCR_HXOE (1 << 17) /* Transceiver Output Enable */
131#define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */
132
133#define UDCCSR0_SA (1 << 7) /* Setup Active */
134#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */
135#define UDCCSR0_FST (1 << 5) /* Force Stall */
136#define UDCCSR0_SST (1 << 4) /* Sent Stall */
137#define UDCCSR0_DME (1 << 3) /* DMA Enable */
138#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */
139#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */
140#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */
141
142#define UDCCSR_DPE (1 << 9) /* Data Packet Error */
143#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */
144#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */
145#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */
146#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */
147#define UDCCSR_FST (1 << 5) /* Force STALL */
148#define UDCCSR_SST (1 << 4) /* Sent STALL */
149#define UDCCSR_DME (1 << 3) /* DMA Enable */
150#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */
151#define UDCCSR_PC (1 << 1) /* Packet Complete */
152#define UDCCSR_FS (1 << 0) /* FIFO needs service */
153
154#define UDCCONR_CN (0x03 << 25) /* Configuration Number */
155#define UDCCONR_CN_S 25
156#define UDCCONR_IN (0x07 << 22) /* Interface Number */
157#define UDCCONR_IN_S 22
158#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */
159#define UDCCONR_AISN_S 19
160#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */
161#define UDCCONR_EN_S 15
162#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */
163#define UDCCONR_ET_S 13
164#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */
165#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */
166#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */
167#define UDCCONR_ET_NU (0x00 << 13) /* Not used */
168#define UDCCONR_ED (1 << 12) /* Endpoint Direction */
169#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */
170#define UDCCONR_MPS_S 2
171#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */
172#define UDCCONR_EE (1 << 0) /* Endpoint Enable */
173
174#define UDCCR_MASK_BITS (UDCCR_OEN | UDCCR_SMAC | UDCCR_UDR | UDCCR_UDE)
175#define UDCCSR_WR_MASK (UDCCSR_DME | UDCCSR_FST)
176#define UDC_FNR_MASK (0x7ff)
177#define UDC_BCR_MASK (0x3ff)
178
179/*
180 * UDCCR = UDC Endpoint Configuration Registers
181 * UDCCSR = UDC Control/Status Register for this EP
182 * UDCBCR = UDC Byte Count Remaining (contents of OUT fifo)
183 * UDCDR = UDC Endpoint Data Register (the fifo)
184 */
185#define ofs_UDCCR(ep) (UDCCRn(ep->idx))
186#define ofs_UDCCSR(ep) (UDCCSRn(ep->idx))
187#define ofs_UDCBCR(ep) (UDCBCRn(ep->idx))
188#define ofs_UDCDR(ep) (UDCDRn(ep->idx))
189
190/* Register access macros */
191#define udc_ep_readl(ep, reg) \
192 __raw_readl((ep)->dev->regs + ofs_##reg(ep))
193#define udc_ep_writel(ep, reg, value) \
194 __raw_writel((value), ep->dev->regs + ofs_##reg(ep))
195#define udc_ep_readb(ep, reg) \
196 __raw_readb((ep)->dev->regs + ofs_##reg(ep))
197#define udc_ep_writeb(ep, reg, value) \
198 __raw_writeb((value), ep->dev->regs + ofs_##reg(ep))
199#define udc_readl(dev, reg) \
200 __raw_readl((dev)->regs + (reg))
201#define udc_writel(udc, reg, value) \
202 __raw_writel((value), (udc)->regs + (reg))
203
204#define UDCCSR_MASK (UDCCSR_FST | UDCCSR_DME)
205#define UDCCISR0_EP_MASK ~0
206#define UDCCISR1_EP_MASK 0xffff
207#define UDCCSR0_CTRL_REQ_MASK (UDCCSR0_OPC | UDCCSR0_SA | UDCCSR0_RNE)
208
209#define EPIDX(ep) (ep->idx)
210#define EPADDR(ep) (ep->addr)
211#define EPXFERTYPE(ep) (ep->type)
212#define EPNAME(ep) (ep->name)
213#define is_ep0(ep) (!ep->idx)
214#define EPXFERTYPE_is_ISO(ep) (EPXFERTYPE(ep) == USB_ENDPOINT_XFER_ISOC)
215
216/*
217 * Endpoint definitions
218 *
219 * Once enabled, pxa endpoint configuration is freezed, and cannot change
220 * unless a reset happens or the udc is disabled.
221 * Therefore, we must define all pxa potential endpoint definitions needed for
222 * all gadget and set them up before the udc is enabled.
223 *
224 * As the architecture chosen is fully static, meaning the pxa endpoint
225 * configurations are set up once and for all, we must provide a way to match
226 * one usb endpoint (usb_ep) to several pxa endpoints. The reason is that gadget
227 * layer autoconf doesn't choose the usb_ep endpoint on (config, interface, alt)
228 * criteria, while the pxa architecture requires that.
229 *
230 * The solution is to define several pxa endpoints matching one usb_ep. Ex:
231 * - "ep1-in" matches pxa endpoint EPA (which is an IN ep at addr 1, when
232 * the udc talks on (config=3, interface=0, alt=0)
233 * - "ep1-in" matches pxa endpoint EPB (which is an IN ep at addr 1, when
234 * the udc talks on (config=3, interface=0, alt=1)
235 * - "ep1-in" matches pxa endpoint EPC (which is an IN ep at addr 1, when
236 * the udc talks on (config=2, interface=0, alt=0)
237 *
238 * We'll define the pxa endpoint by its index (EPA => idx=1, EPB => idx=2, ...)
239 */
240
241/*
242 * Endpoint definition helpers
243 */
244#define USB_EP_DEF(addr, bname, dir, type, maxpkt) \
245{ .usb_ep = { .name = bname, .ops = &pxa_ep_ops, .maxpacket = maxpkt, }, \
246 .desc = { .bEndpointAddress = addr | (dir ? USB_DIR_IN : 0), \
247 .bmAttributes = type, \
248 .wMaxPacketSize = maxpkt, }, \
249 .dev = &memory \
250}
251#define USB_EP_BULK(addr, bname, dir) \
252 USB_EP_DEF(addr, bname, dir, USB_ENDPOINT_XFER_BULK, BULK_FIFO_SIZE)
253#define USB_EP_ISO(addr, bname, dir) \
254 USB_EP_DEF(addr, bname, dir, USB_ENDPOINT_XFER_ISOC, ISO_FIFO_SIZE)
255#define USB_EP_INT(addr, bname, dir) \
256 USB_EP_DEF(addr, bname, dir, USB_ENDPOINT_XFER_INT, INT_FIFO_SIZE)
257#define USB_EP_IN_BULK(n) USB_EP_BULK(n, "ep" #n "in-bulk", 1)
258#define USB_EP_OUT_BULK(n) USB_EP_BULK(n, "ep" #n "out-bulk", 0)
259#define USB_EP_IN_ISO(n) USB_EP_ISO(n, "ep" #n "in-iso", 1)
260#define USB_EP_OUT_ISO(n) USB_EP_ISO(n, "ep" #n "out-iso", 0)
261#define USB_EP_IN_INT(n) USB_EP_INT(n, "ep" #n "in-int", 1)
262#define USB_EP_CTRL USB_EP_DEF(0, "ep0", 0, 0, EP0_FIFO_SIZE)
263
264#define PXA_EP_DEF(_idx, _addr, dir, _type, maxpkt, _config, iface, altset) \
265{ \
266 .dev = &memory, \
267 .name = "ep" #_idx, \
268 .idx = _idx, .enabled = 0, \
269 .dir_in = dir, .addr = _addr, \
270 .config = _config, .interface = iface, .alternate = altset, \
271 .type = _type, .fifo_size = maxpkt, \
272}
273#define PXA_EP_BULK(_idx, addr, dir, config, iface, alt) \
274 PXA_EP_DEF(_idx, addr, dir, USB_ENDPOINT_XFER_BULK, BULK_FIFO_SIZE, \
275 config, iface, alt)
276#define PXA_EP_ISO(_idx, addr, dir, config, iface, alt) \
277 PXA_EP_DEF(_idx, addr, dir, USB_ENDPOINT_XFER_ISOC, ISO_FIFO_SIZE, \
278 config, iface, alt)
279#define PXA_EP_INT(_idx, addr, dir, config, iface, alt) \
280 PXA_EP_DEF(_idx, addr, dir, USB_ENDPOINT_XFER_INT, INT_FIFO_SIZE, \
281 config, iface, alt)
282#define PXA_EP_IN_BULK(i, adr, c, f, a) PXA_EP_BULK(i, adr, 1, c, f, a)
283#define PXA_EP_OUT_BULK(i, adr, c, f, a) PXA_EP_BULK(i, adr, 0, c, f, a)
284#define PXA_EP_IN_ISO(i, adr, c, f, a) PXA_EP_ISO(i, adr, 1, c, f, a)
285#define PXA_EP_OUT_ISO(i, adr, c, f, a) PXA_EP_ISO(i, adr, 0, c, f, a)
286#define PXA_EP_IN_INT(i, adr, c, f, a) PXA_EP_INT(i, adr, 1, c, f, a)
287#define PXA_EP_CTRL PXA_EP_DEF(0, 0, 0, 0, EP0_FIFO_SIZE, 0, 0, 0)
288
289struct pxa27x_udc;
290
291struct stats {
292 unsigned long in_ops;
293 unsigned long out_ops;
294 unsigned long in_bytes;
295 unsigned long out_bytes;
296 unsigned long irqs;
297};
298
299/**
300 * struct udc_usb_ep - container of each usb_ep structure
301 * @usb_ep: usb endpoint
302 * @desc: usb descriptor, especially type and address
303 * @dev: udc managing this endpoint
304 * @pxa_ep: matching pxa_ep (cache of find_pxa_ep() call)
305 */
306struct udc_usb_ep {
307 struct usb_ep usb_ep;
308 struct usb_endpoint_descriptor desc;
309 struct pxa_udc *dev;
310 struct pxa_ep *pxa_ep;
311};
312
313/**
314 * struct pxa_ep - pxa endpoint
315 * @dev: udc device
316 * @queue: requests queue
317 * @lock: lock to pxa_ep data (queues and stats)
318 * @enabled: true when endpoint enabled (not stopped by gadget layer)
319 * @idx: endpoint index (1 => epA, 2 => epB, ..., 24 => epX)
320 * @name: endpoint name (for trace/debug purpose)
321 * @dir_in: 1 if IN endpoint, 0 if OUT endpoint
322 * @addr: usb endpoint number
323 * @config: configuration in which this endpoint is active
324 * @interface: interface in which this endpoint is active
325 * @alternate: altsetting in which this endpoitn is active
326 * @fifo_size: max packet size in the endpoint fifo
327 * @type: endpoint type (bulk, iso, int, ...)
328 * @udccsr_value: save register of UDCCSR0 for suspend/resume
329 * @udccr_value: save register of UDCCR for suspend/resume
330 * @stats: endpoint statistics
331 *
332 * The *PROBLEM* is that pxa's endpoint configuration scheme is both misdesigned
333 * (cares about config/interface/altsetting, thus placing needless limits on
334 * device capability) and full of implementation bugs forcing it to be set up
335 * for use more or less like a pxa255.
336 *
337 * As we define the pxa_ep statically, we must guess all needed pxa_ep for all
338 * gadget which may work with this udc driver.
339 */
340struct pxa_ep {
341 struct pxa_udc *dev;
342
343 struct list_head queue;
344 spinlock_t lock; /* Protects this structure */
345 /* (queues, stats) */
346 unsigned enabled:1;
347
348 unsigned idx:5;
349 char *name;
350
351 /*
352 * Specific pxa endpoint data, needed for hardware initialization
353 */
354 unsigned dir_in:1;
355 unsigned addr:3;
356 unsigned config:2;
357 unsigned interface:3;
358 unsigned alternate:3;
359 unsigned fifo_size;
360 unsigned type;
361
362#ifdef CONFIG_PM
363 u32 udccsr_value;
364 u32 udccr_value;
365#endif
366 struct stats stats;
367};
368
369/**
370 * struct pxa27x_request - container of each usb_request structure
371 * @req: usb request
372 * @udc_usb_ep: usb endpoint the request was submitted on
373 * @in_use: sanity check if request already queued on an pxa_ep
374 * @queue: linked list of requests, linked on pxa_ep->queue
375 */
376struct pxa27x_request {
377 struct usb_request req;
378 struct udc_usb_ep *udc_usb_ep;
379 unsigned in_use:1;
380 struct list_head queue;
381};
382
383enum ep0_state {
384 WAIT_FOR_SETUP,
385 SETUP_STAGE,
386 IN_DATA_STAGE,
387 OUT_DATA_STAGE,
388 IN_STATUS_STAGE,
389 OUT_STATUS_STAGE,
390 STALL,
391 WAIT_ACK_SET_CONF_INTERF
392};
393
394static char *ep0_state_name[] = {
395 "WAIT_FOR_SETUP", "SETUP_STAGE", "IN_DATA_STAGE", "OUT_DATA_STAGE",
396 "IN_STATUS_STAGE", "OUT_STATUS_STAGE", "STALL",
397 "WAIT_ACK_SET_CONF_INTERF"
398};
399#define EP0_STNAME(udc) ep0_state_name[(udc)->ep0state]
400
401#define EP0_FIFO_SIZE 16U
402#define BULK_FIFO_SIZE 64U
403#define ISO_FIFO_SIZE 256U
404#define INT_FIFO_SIZE 16U
405
406struct udc_stats {
407 unsigned long irqs_reset;
408 unsigned long irqs_suspend;
409 unsigned long irqs_resume;
410 unsigned long irqs_reconfig;
411};
412
413#define NR_USB_ENDPOINTS (1 + 5) /* ep0 + ep1in-bulk + .. + ep3in-iso */
414#define NR_PXA_ENDPOINTS (1 + 14) /* ep0 + epA + epB + .. + epX */
415
416/**
417 * struct pxa_udc - udc structure
418 * @regs: mapped IO space
419 * @irq: udc irq
420 * @clk: udc clock
421 * @usb_gadget: udc gadget structure
422 * @driver: bound gadget (zero, g_ether, g_file_storage, ...)
423 * @dev: device
424 * @mach: machine info, used to activate specific GPIO
Robert Jarzmik7fec3c22009-01-24 23:57:30 -0800425 * @transceiver: external transceiver to handle vbus sense and D+ pullup
Robert Jarzmikd75379a2008-04-18 15:56:49 -0700426 * @ep0state: control endpoint state machine state
427 * @stats: statistics on udc usage
428 * @udc_usb_ep: array of usb endpoints offered by the gadget
429 * @pxa_ep: array of pxa available endpoints
Robert Jarzmikeb507022009-01-24 23:55:34 -0800430 * @enabled: UDC was enabled by a previous udc_enable()
431 * @pullup_on: if pullup resistor connected to D+ pin
432 * @pullup_resume: if pullup resistor should be connected to D+ pin on resume
Robert Jarzmikd75379a2008-04-18 15:56:49 -0700433 * @config: UDC active configuration
434 * @last_interface: UDC interface of the last SET_INTERFACE host request
435 * @last_alternate: UDC altsetting of the last SET_INTERFACE host request
436 * @udccsr0: save of udccsr0 in case of suspend
437 * @debugfs_root: root entry of debug filesystem
438 * @debugfs_state: debugfs entry for "udcstate"
439 * @debugfs_queues: debugfs entry for "queues"
440 * @debugfs_eps: debugfs entry for "epstate"
441 */
442struct pxa_udc {
443 void __iomem *regs;
444 int irq;
445 struct clk *clk;
446
447 struct usb_gadget gadget;
448 struct usb_gadget_driver *driver;
449 struct device *dev;
450 struct pxa2xx_udc_mach_info *mach;
Robert Jarzmik7fec3c22009-01-24 23:57:30 -0800451 struct otg_transceiver *transceiver;
Robert Jarzmikd75379a2008-04-18 15:56:49 -0700452
453 enum ep0_state ep0state;
454 struct udc_stats stats;
455
456 struct udc_usb_ep udc_usb_ep[NR_USB_ENDPOINTS];
457 struct pxa_ep pxa_ep[NR_PXA_ENDPOINTS];
458
Robert Jarzmikeb507022009-01-24 23:55:34 -0800459 unsigned enabled:1;
460 unsigned pullup_on:1;
461 unsigned pullup_resume:1;
Robert Jarzmikb799a7e2009-01-24 23:56:42 -0800462 unsigned vbus_sensed:1;
Robert Jarzmikd75379a2008-04-18 15:56:49 -0700463 unsigned config:2;
464 unsigned last_interface:3;
465 unsigned last_alternate:3;
466
467#ifdef CONFIG_PM
468 unsigned udccsr0;
469#endif
470#ifdef CONFIG_USB_GADGET_DEBUG_FS
471 struct dentry *debugfs_root;
472 struct dentry *debugfs_state;
473 struct dentry *debugfs_queues;
474 struct dentry *debugfs_eps;
475#endif
476};
477
478static inline struct pxa_udc *to_gadget_udc(struct usb_gadget *gadget)
479{
480 return container_of(gadget, struct pxa_udc, gadget);
481}
482
483/*
484 * Debugging/message support
485 */
486#define ep_dbg(ep, fmt, arg...) \
487 dev_dbg(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg)
488#define ep_vdbg(ep, fmt, arg...) \
489 dev_vdbg(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg)
490#define ep_err(ep, fmt, arg...) \
491 dev_err(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg)
492#define ep_info(ep, fmt, arg...) \
493 dev_info(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg)
494#define ep_warn(ep, fmt, arg...) \
495 dev_warn(ep->dev->dev, "%s:%s:" fmt, EPNAME(ep), __func__, ## arg)
496
Robert Jarzmikd75379a2008-04-18 15:56:49 -0700497#endif /* __LINUX_USB_GADGET_PXA27X_H */