blob: 1dae7f8f3c6b47c7f4861ff824fff0a4d4dcf8f3 [file] [log] [blame]
Eric Miaodd89ccb2008-09-01 06:50:23 +08001/*
2 * tdo24m - SPI-based drivers for Toppoly TDO24M series LCD panels
3 *
4 * Copyright (C) 2008 Marvell International Ltd.
5 * Eric Miao <eric.miao@marvell.com>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * publishhed by the Free Software Foundation.
10 */
11
12#include <linux/module.h>
13#include <linux/kernel.h>
14#include <linux/init.h>
15#include <linux/device.h>
16#include <linux/spi/spi.h>
Mike Rapoportf4f6bda2008-12-03 08:48:52 +000017#include <linux/spi/tdo24m.h>
Eric Miaodd89ccb2008-09-01 06:50:23 +080018#include <linux/fb.h>
19#include <linux/lcd.h>
20
21#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
22
23#define TDO24M_SPI_BUFF_SIZE (4)
24#define MODE_QVGA 0
25#define MODE_VGA 1
26
27struct tdo24m {
28 struct spi_device *spi_dev;
29 struct lcd_device *lcd_dev;
30
31 struct spi_message msg;
32 struct spi_transfer xfer;
33 uint8_t *buf;
34
Mike Rapoportf4f6bda2008-12-03 08:48:52 +000035 int (*adj_mode)(struct tdo24m *lcd, int mode);
36 int color_invert;
37
Eric Miaodd89ccb2008-09-01 06:50:23 +080038 int power;
39 int mode;
40};
41
42/* use bit 30, 31 as the indicator of command parameter number */
43#define CMD0(x) ((0 << 30) | (x))
44#define CMD1(x, x1) ((1 << 30) | ((x) << 9) | 0x100 | (x1))
45#define CMD2(x, x1, x2) ((2 << 30) | ((x) << 18) | 0x20000 |\
46 ((x1) << 9) | 0x100 | (x2))
47#define CMD_NULL (-1)
48
49static uint32_t lcd_panel_reset[] = {
50 CMD0(0x1), /* reset */
51 CMD0(0x0), /* nop */
52 CMD0(0x0), /* nop */
53 CMD0(0x0), /* nop */
54 CMD_NULL,
55};
56
57static uint32_t lcd_panel_on[] = {
58 CMD0(0x29), /* Display ON */
59 CMD2(0xB8, 0xFF, 0xF9), /* Output Control */
60 CMD0(0x11), /* Sleep out */
61 CMD1(0xB0, 0x16), /* Wake */
62 CMD_NULL,
63};
64
65static uint32_t lcd_panel_off[] = {
66 CMD0(0x28), /* Display OFF */
67 CMD2(0xB8, 0x80, 0x02), /* Output Control */
68 CMD0(0x10), /* Sleep in */
69 CMD1(0xB0, 0x00), /* Deep stand by in */
70 CMD_NULL,
71};
72
Mike Rapoportf4f6bda2008-12-03 08:48:52 +000073static uint32_t lcd_vga_pass_through_tdo24m[] = {
Eric Miaodd89ccb2008-09-01 06:50:23 +080074 CMD1(0xB0, 0x16),
75 CMD1(0xBC, 0x80),
76 CMD1(0xE1, 0x00),
77 CMD1(0x36, 0x50),
78 CMD1(0x3B, 0x00),
79 CMD_NULL,
80};
81
Mike Rapoportf4f6bda2008-12-03 08:48:52 +000082static uint32_t lcd_qvga_pass_through_tdo24m[] = {
Eric Miaodd89ccb2008-09-01 06:50:23 +080083 CMD1(0xB0, 0x16),
84 CMD1(0xBC, 0x81),
85 CMD1(0xE1, 0x00),
86 CMD1(0x36, 0x50),
87 CMD1(0x3B, 0x22),
88 CMD_NULL,
89};
90
Mike Rapoportf4f6bda2008-12-03 08:48:52 +000091static uint32_t lcd_vga_transfer_tdo24m[] = {
Eric Miaodd89ccb2008-09-01 06:50:23 +080092 CMD1(0xcf, 0x02), /* Blanking period control (1) */
93 CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */
94 CMD1(0xd1, 0x01), /* CKV timing control on/off */
95 CMD2(0xd2, 0x14, 0x00), /* CKV 1,2 timing control */
96 CMD2(0xd3, 0x1a, 0x0f), /* OEV timing control */
97 CMD2(0xd4, 0x1f, 0xaf), /* ASW timing control (1) */
98 CMD1(0xd5, 0x14), /* ASW timing control (2) */
99 CMD0(0x21), /* Invert for normally black display */
100 CMD0(0x29), /* Display on */
101 CMD_NULL,
102};
103
104static uint32_t lcd_qvga_transfer[] = {
105 CMD1(0xd6, 0x02), /* Blanking period control (1) */
106 CMD2(0xd7, 0x08, 0x04), /* Blanking period control (2) */
107 CMD1(0xd8, 0x01), /* CKV timing control on/off */
108 CMD2(0xd9, 0x00, 0x08), /* CKV 1,2 timing control */
109 CMD2(0xde, 0x05, 0x0a), /* OEV timing control */
110 CMD2(0xdf, 0x0a, 0x19), /* ASW timing control (1) */
111 CMD1(0xe0, 0x0a), /* ASW timing control (2) */
112 CMD0(0x21), /* Invert for normally black display */
113 CMD0(0x29), /* Display on */
114 CMD_NULL,
115};
116
Mike Rapoportf4f6bda2008-12-03 08:48:52 +0000117static uint32_t lcd_vga_pass_through_tdo35s[] = {
118 CMD1(0xB0, 0x16),
119 CMD1(0xBC, 0x80),
120 CMD1(0xE1, 0x00),
121 CMD1(0x3B, 0x00),
122 CMD_NULL,
123};
124
125static uint32_t lcd_qvga_pass_through_tdo35s[] = {
126 CMD1(0xB0, 0x16),
127 CMD1(0xBC, 0x81),
128 CMD1(0xE1, 0x00),
129 CMD1(0x3B, 0x22),
130 CMD_NULL,
131};
132
133static uint32_t lcd_vga_transfer_tdo35s[] = {
134 CMD1(0xcf, 0x02), /* Blanking period control (1) */
135 CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */
136 CMD1(0xd1, 0x01), /* CKV timing control on/off */
137 CMD2(0xd2, 0x00, 0x1e), /* CKV 1,2 timing control */
138 CMD2(0xd3, 0x14, 0x28), /* OEV timing control */
139 CMD2(0xd4, 0x28, 0x64), /* ASW timing control (1) */
140 CMD1(0xd5, 0x28), /* ASW timing control (2) */
141 CMD0(0x21), /* Invert for normally black display */
142 CMD0(0x29), /* Display on */
143 CMD_NULL,
144};
145
Eric Miaodd89ccb2008-09-01 06:50:23 +0800146static uint32_t lcd_panel_config[] = {
147 CMD2(0xb8, 0xff, 0xf9), /* Output control */
148 CMD0(0x11), /* sleep out */
149 CMD1(0xba, 0x01), /* Display mode (1) */
150 CMD1(0xbb, 0x00), /* Display mode (2) */
151 CMD1(0x3a, 0x60), /* Display mode 18-bit RGB */
152 CMD1(0xbf, 0x10), /* Drive system change control */
153 CMD1(0xb1, 0x56), /* Booster operation setup */
154 CMD1(0xb2, 0x33), /* Booster mode setup */
155 CMD1(0xb3, 0x11), /* Booster frequency setup */
156 CMD1(0xb4, 0x02), /* Op amp/system clock */
157 CMD1(0xb5, 0x35), /* VCS voltage */
158 CMD1(0xb6, 0x40), /* VCOM voltage */
159 CMD1(0xb7, 0x03), /* External display signal */
160 CMD1(0xbd, 0x00), /* ASW slew rate */
161 CMD1(0xbe, 0x00), /* Dummy data for QuadData operation */
162 CMD1(0xc0, 0x11), /* Sleep out FR count (A) */
163 CMD1(0xc1, 0x11), /* Sleep out FR count (B) */
164 CMD1(0xc2, 0x11), /* Sleep out FR count (C) */
165 CMD2(0xc3, 0x20, 0x40), /* Sleep out FR count (D) */
166 CMD2(0xc4, 0x60, 0xc0), /* Sleep out FR count (E) */
167 CMD2(0xc5, 0x10, 0x20), /* Sleep out FR count (F) */
168 CMD1(0xc6, 0xc0), /* Sleep out FR count (G) */
169 CMD2(0xc7, 0x33, 0x43), /* Gamma 1 fine tuning (1) */
170 CMD1(0xc8, 0x44), /* Gamma 1 fine tuning (2) */
171 CMD1(0xc9, 0x33), /* Gamma 1 inclination adjustment */
172 CMD1(0xca, 0x00), /* Gamma 1 blue offset adjustment */
173 CMD2(0xec, 0x01, 0xf0), /* Horizontal clock cycles */
174 CMD_NULL,
175};
176
177static int tdo24m_writes(struct tdo24m *lcd, uint32_t *array)
178{
179 struct spi_transfer *x = &lcd->xfer;
180 uint32_t data, *p = array;
181 int nparams, err = 0;
182
183 for (; *p != CMD_NULL; p++) {
Mike Rapoportf4f6bda2008-12-03 08:48:52 +0000184 if (!lcd->color_invert && *p == CMD0(0x21))
185 continue;
Eric Miaodd89ccb2008-09-01 06:50:23 +0800186
187 nparams = (*p >> 30) & 0x3;
188
189 data = *p << (7 - nparams);
190 switch (nparams) {
191 case 0:
192 lcd->buf[0] = (data >> 8) & 0xff;
193 lcd->buf[1] = data & 0xff;
194 break;
195 case 1:
196 lcd->buf[0] = (data >> 16) & 0xff;
197 lcd->buf[1] = (data >> 8) & 0xff;
198 lcd->buf[2] = data & 0xff;
199 break;
200 case 2:
201 lcd->buf[0] = (data >> 24) & 0xff;
202 lcd->buf[1] = (data >> 16) & 0xff;
203 lcd->buf[2] = (data >> 8) & 0xff;
204 lcd->buf[3] = data & 0xff;
205 break;
206 default:
207 continue;
208 }
209 x->len = nparams + 2;
210 err = spi_sync(lcd->spi_dev, &lcd->msg);
211 if (err)
212 break;
213 }
214
215 return err;
216}
217
218static int tdo24m_adj_mode(struct tdo24m *lcd, int mode)
219{
220 switch (mode) {
221 case MODE_VGA:
Mike Rapoportf4f6bda2008-12-03 08:48:52 +0000222 tdo24m_writes(lcd, lcd_vga_pass_through_tdo24m);
Eric Miaodd89ccb2008-09-01 06:50:23 +0800223 tdo24m_writes(lcd, lcd_panel_config);
Mike Rapoportf4f6bda2008-12-03 08:48:52 +0000224 tdo24m_writes(lcd, lcd_vga_transfer_tdo24m);
Eric Miaodd89ccb2008-09-01 06:50:23 +0800225 break;
226 case MODE_QVGA:
Mike Rapoportf4f6bda2008-12-03 08:48:52 +0000227 tdo24m_writes(lcd, lcd_qvga_pass_through_tdo24m);
228 tdo24m_writes(lcd, lcd_panel_config);
229 tdo24m_writes(lcd, lcd_qvga_transfer);
230 break;
231 default:
232 return -EINVAL;
233 }
234
235 lcd->mode = mode;
236 return 0;
237}
238
239static int tdo35s_adj_mode(struct tdo24m *lcd, int mode)
240{
241 switch (mode) {
242 case MODE_VGA:
243 tdo24m_writes(lcd, lcd_vga_pass_through_tdo35s);
244 tdo24m_writes(lcd, lcd_panel_config);
245 tdo24m_writes(lcd, lcd_vga_transfer_tdo35s);
246 break;
247 case MODE_QVGA:
248 tdo24m_writes(lcd, lcd_qvga_pass_through_tdo35s);
Eric Miaodd89ccb2008-09-01 06:50:23 +0800249 tdo24m_writes(lcd, lcd_panel_config);
250 tdo24m_writes(lcd, lcd_qvga_transfer);
251 break;
252 default:
253 return -EINVAL;
254 }
255
256 lcd->mode = mode;
257 return 0;
258}
259
260static int tdo24m_power_on(struct tdo24m *lcd)
261{
262 int err;
263
264 err = tdo24m_writes(lcd, lcd_panel_on);
265 if (err)
266 goto out;
267
268 err = tdo24m_writes(lcd, lcd_panel_reset);
269 if (err)
270 goto out;
271
Mike Rapoportf4f6bda2008-12-03 08:48:52 +0000272 err = lcd->adj_mode(lcd, lcd->mode);
Eric Miaodd89ccb2008-09-01 06:50:23 +0800273out:
274 return err;
275}
276
277static int tdo24m_power_off(struct tdo24m *lcd)
278{
279 return tdo24m_writes(lcd, lcd_panel_off);
280}
281
282static int tdo24m_power(struct tdo24m *lcd, int power)
283{
284 int ret = 0;
285
286 if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
287 ret = tdo24m_power_on(lcd);
288 else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
289 ret = tdo24m_power_off(lcd);
290
291 if (!ret)
292 lcd->power = power;
293
294 return ret;
295}
296
297
298static int tdo24m_set_power(struct lcd_device *ld, int power)
299{
300 struct tdo24m *lcd = lcd_get_data(ld);
301 return tdo24m_power(lcd, power);
302}
303
304static int tdo24m_get_power(struct lcd_device *ld)
305{
306 struct tdo24m *lcd = lcd_get_data(ld);
307 return lcd->power;
308}
309
310static int tdo24m_set_mode(struct lcd_device *ld, struct fb_videomode *m)
311{
312 struct tdo24m *lcd = lcd_get_data(ld);
313 int mode = MODE_QVGA;
314
315 if (m->xres == 640 || m->xres == 480)
316 mode = MODE_VGA;
317
318 if (lcd->mode == mode)
319 return 0;
320
Mike Rapoportf4f6bda2008-12-03 08:48:52 +0000321 return lcd->adj_mode(lcd, mode);
Eric Miaodd89ccb2008-09-01 06:50:23 +0800322}
323
324static struct lcd_ops tdo24m_ops = {
325 .get_power = tdo24m_get_power,
326 .set_power = tdo24m_set_power,
327 .set_mode = tdo24m_set_mode,
328};
329
330static int __devinit tdo24m_probe(struct spi_device *spi)
331{
332 struct tdo24m *lcd;
333 struct spi_message *m;
334 struct spi_transfer *x;
Mike Rapoportf4f6bda2008-12-03 08:48:52 +0000335 struct tdo24m_platform_data *pdata;
336 enum tdo24m_model model;
Eric Miaodd89ccb2008-09-01 06:50:23 +0800337 int err;
338
Mike Rapoportf4f6bda2008-12-03 08:48:52 +0000339 pdata = spi->dev.platform_data;
340 if (pdata)
341 model = pdata->model;
342 else
343 model = TDO24M;
344
Eric Miaodd89ccb2008-09-01 06:50:23 +0800345 spi->bits_per_word = 8;
346 spi->mode = SPI_MODE_3;
347 err = spi_setup(spi);
348 if (err)
349 return err;
350
351 lcd = kzalloc(sizeof(struct tdo24m), GFP_KERNEL);
352 if (!lcd)
353 return -ENOMEM;
354
355 lcd->spi_dev = spi;
356 lcd->power = FB_BLANK_POWERDOWN;
357 lcd->mode = MODE_VGA; /* default to VGA */
358
359 lcd->buf = kmalloc(TDO24M_SPI_BUFF_SIZE, sizeof(GFP_KERNEL));
360 if (lcd->buf == NULL) {
361 kfree(lcd);
362 return -ENOMEM;
363 }
364
365 m = &lcd->msg;
366 x = &lcd->xfer;
367
368 spi_message_init(m);
369
370 x->tx_buf = &lcd->buf[0];
371 spi_message_add_tail(x, m);
372
Mike Rapoportf4f6bda2008-12-03 08:48:52 +0000373 switch (model) {
374 case TDO24M:
375 lcd->color_invert = 1;
376 lcd->adj_mode = tdo24m_adj_mode;
377 break;
378 case TDO35S:
379 lcd->adj_mode = tdo35s_adj_mode;
380 lcd->color_invert = 0;
381 break;
382 default:
383 dev_err(&spi->dev, "Unsupported model");
384 goto out_free;
385 }
386
Eric Miaodd89ccb2008-09-01 06:50:23 +0800387 lcd->lcd_dev = lcd_device_register("tdo24m", &spi->dev,
388 lcd, &tdo24m_ops);
389 if (IS_ERR(lcd->lcd_dev)) {
390 err = PTR_ERR(lcd->lcd_dev);
391 goto out_free;
392 }
393
394 dev_set_drvdata(&spi->dev, lcd);
395 err = tdo24m_power(lcd, FB_BLANK_UNBLANK);
396 if (err)
397 goto out_unregister;
398
399 return 0;
400
401out_unregister:
402 lcd_device_unregister(lcd->lcd_dev);
403out_free:
404 kfree(lcd->buf);
405 kfree(lcd);
406 return err;
407}
408
409static int __devexit tdo24m_remove(struct spi_device *spi)
410{
411 struct tdo24m *lcd = dev_get_drvdata(&spi->dev);
412
413 tdo24m_power(lcd, FB_BLANK_POWERDOWN);
414 lcd_device_unregister(lcd->lcd_dev);
415 kfree(lcd->buf);
416 kfree(lcd);
417
418 return 0;
419}
420
421#ifdef CONFIG_PM
422static int tdo24m_suspend(struct spi_device *spi, pm_message_t state)
423{
424 struct tdo24m *lcd = dev_get_drvdata(&spi->dev);
425
426 return tdo24m_power(lcd, FB_BLANK_POWERDOWN);
427}
428
429static int tdo24m_resume(struct spi_device *spi)
430{
431 struct tdo24m *lcd = dev_get_drvdata(&spi->dev);
432
433 return tdo24m_power(lcd, FB_BLANK_UNBLANK);
434}
435#else
436#define tdo24m_suspend NULL
437#define tdo24m_resume NULL
438#endif
439
440/* Power down all displays on reboot, poweroff or halt */
441static void tdo24m_shutdown(struct spi_device *spi)
442{
443 struct tdo24m *lcd = dev_get_drvdata(&spi->dev);
444
445 tdo24m_power(lcd, FB_BLANK_POWERDOWN);
446}
447
448static struct spi_driver tdo24m_driver = {
449 .driver = {
450 .name = "tdo24m",
451 .owner = THIS_MODULE,
452 },
453 .probe = tdo24m_probe,
454 .remove = __devexit_p(tdo24m_remove),
455 .shutdown = tdo24m_shutdown,
456 .suspend = tdo24m_suspend,
457 .resume = tdo24m_resume,
458};
459
460static int __init tdo24m_init(void)
461{
462 return spi_register_driver(&tdo24m_driver);
463}
464module_init(tdo24m_init);
465
466static void __exit tdo24m_exit(void)
467{
468 spi_unregister_driver(&tdo24m_driver);
469}
470module_exit(tdo24m_exit);
471
472MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
473MODULE_DESCRIPTION("Driver for Toppoly TDO24M LCD Panel");
474MODULE_LICENSE("GPL");