Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / 829bc78aa7628e81a9de717316b85cbee3c5eb86 / . / arch / sh / boards / mach-microdev / fdc37c93xapm.c
blob: 458a7cf5fb46472a31756907812b0090b7773c87 [file] [log] [blame]
Paul Mundt0ef0e6c2008-12-17 13:14:22 +0900[diff] [blame]1/*
2 *
3 * Setup for the SMSC FDC37C93xAPM
4 *
5 * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
6 * Copyright (C) 2003, 2004 SuperH, Inc.
7 * Copyright (C) 2004, 2005 Paul Mundt
8 *
9 * SuperH SH4-202 MicroDev board support.
10 *
11 * May be copied or modified under the terms of the GNU General Public
12 * License. See linux/COPYING for more information.
13 */
14#include <linux/init.h>
15#include <linux/ioport.h>
16#include <linux/io.h>
17#include <linux/err.h>
18#include <mach/microdev.h>
19
20#define SMSC_CONFIG_PORT_ADDR (0x3F0)
21#define SMSC_INDEX_PORT_ADDR SMSC_CONFIG_PORT_ADDR
22#define SMSC_DATA_PORT_ADDR (SMSC_INDEX_PORT_ADDR + 1)
23
24#define SMSC_ENTER_CONFIG_KEY 0x55
25#define SMSC_EXIT_CONFIG_KEY 0xaa
26
27#define SMCS_LOGICAL_DEV_INDEX 0x07 /* Logical Device Number */
28#define SMSC_DEVICE_ID_INDEX 0x20 /* Device ID */
29#define SMSC_DEVICE_REV_INDEX 0x21 /* Device Revision */
30#define SMSC_ACTIVATE_INDEX 0x30 /* Activate */
31#define SMSC_PRIMARY_BASE_INDEX 0x60 /* Primary Base Address */
32#define SMSC_SECONDARY_BASE_INDEX 0x62 /* Secondary Base Address */
33#define SMSC_PRIMARY_INT_INDEX 0x70 /* Primary Interrupt Select */
34#define SMSC_SECONDARY_INT_INDEX 0x72 /* Secondary Interrupt Select */
35#define SMSC_HDCS0_INDEX 0xf0 /* HDCS0 Address Decoder */
36#define SMSC_HDCS1_INDEX 0xf1 /* HDCS1 Address Decoder */
37
38#define SMSC_IDE1_DEVICE 1 /* IDE #1 logical device */
39#define SMSC_IDE2_DEVICE 2 /* IDE #2 logical device */
40#define SMSC_PARALLEL_DEVICE 3 /* Parallel Port logical device */
41#define SMSC_SERIAL1_DEVICE 4 /* Serial #1 logical device */
42#define SMSC_SERIAL2_DEVICE 5 /* Serial #2 logical device */
43#define SMSC_KEYBOARD_DEVICE 7 /* Keyboard logical device */
44#define SMSC_CONFIG_REGISTERS 8 /* Configuration Registers (Aux I/O) */
45
46#define SMSC_READ_INDEXED(index) ({ \
47 outb((index), SMSC_INDEX_PORT_ADDR); \
48 inb(SMSC_DATA_PORT_ADDR); })
49#define SMSC_WRITE_INDEXED(val, index) ({ \
50 outb((index), SMSC_INDEX_PORT_ADDR); \
51 outb((val), SMSC_DATA_PORT_ADDR); })
52
53#define IDE1_PRIMARY_BASE 0x01f0 /* Task File Registe base for IDE #1 */
54#define IDE1_SECONDARY_BASE 0x03f6 /* Miscellaneous AT registers for IDE #1 */
55#define IDE2_PRIMARY_BASE 0x0170 /* Task File Registe base for IDE #2 */
56#define IDE2_SECONDARY_BASE 0x0376 /* Miscellaneous AT registers for IDE #2 */
57
58#define SERIAL1_PRIMARY_BASE 0x03f8
59#define SERIAL2_PRIMARY_BASE 0x02f8
60
61#define MSB(x) ( (x) >> 8 )
62#define LSB(x) ( (x) & 0xff )
63
64 /* General-Purpose base address on CPU-board FPGA */
65#define MICRODEV_FPGA_GP_BASE 0xa6100000ul
66
67static int __init smsc_superio_setup(void)
68{
69
70 unsigned char devid, devrev;
71
72 /* Initially the chip is in run state */
73 /* Put it into configuration state */
74 outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
75
76 /* Read device ID info */
77 devid = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
78 devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
79
80 if ((devid == 0x30) && (devrev == 0x01))
81 printk("SMSC FDC37C93xAPM SuperIO device detected\n");
82 else
83 return -ENODEV;
84
85 /* Select the keyboard device */
86 SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
87 /* enable it */
88 SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
89 /* enable the interrupts */
90 SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_KEYBOARD, SMSC_PRIMARY_INT_INDEX);
91 SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_MOUSE, SMSC_SECONDARY_INT_INDEX);
92
93 /* Select the Serial #1 device */
94 SMSC_WRITE_INDEXED(SMSC_SERIAL1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
95 /* enable it */
96 SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
97 /* program with port addresses */
98 SMSC_WRITE_INDEXED(MSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
99 SMSC_WRITE_INDEXED(LSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
100 SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
101 /* enable the interrupts */
102 SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL1, SMSC_PRIMARY_INT_INDEX);
103
104 /* Select the Serial #2 device */
105 SMSC_WRITE_INDEXED(SMSC_SERIAL2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
106 /* enable it */
107 SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
108 /* program with port addresses */
109 SMSC_WRITE_INDEXED(MSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
110 SMSC_WRITE_INDEXED(LSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
111 SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
112 /* enable the interrupts */
113 SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL2, SMSC_PRIMARY_INT_INDEX);
114
115 /* Select the IDE#1 device */
116 SMSC_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
117 /* enable it */
118 SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
119 /* program with port addresses */
120 SMSC_WRITE_INDEXED(MSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
121 SMSC_WRITE_INDEXED(LSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
122 SMSC_WRITE_INDEXED(MSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
123 SMSC_WRITE_INDEXED(LSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
124 SMSC_WRITE_INDEXED(0x0c, SMSC_HDCS0_INDEX);
125 SMSC_WRITE_INDEXED(0x00, SMSC_HDCS1_INDEX);
126 /* select the interrupt */
127 SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE1, SMSC_PRIMARY_INT_INDEX);
128
129 /* Select the IDE#2 device */
130 SMSC_WRITE_INDEXED(SMSC_IDE2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
131 /* enable it */
132 SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
133 /* program with port addresses */
134 SMSC_WRITE_INDEXED(MSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
135 SMSC_WRITE_INDEXED(LSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
136 SMSC_WRITE_INDEXED(MSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
137 SMSC_WRITE_INDEXED(LSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
138 /* select the interrupt */
139 SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE2, SMSC_PRIMARY_INT_INDEX);
140
141 /* Select the configuration registers */
142 SMSC_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, SMCS_LOGICAL_DEV_INDEX);
143 /* enable the appropriate GPIO pins for IDE functionality:
144 * bit[0] In/Out 1==input; 0==output
145 * bit[1] Polarity 1==invert; 0==no invert
146 * bit[2] Int Enb #1 1==Enable Combined IRQ #1; 0==disable
147 * bit[3:4] Function Select 00==original; 01==Alternate Function #1
148 */
149 SMSC_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
150 SMSC_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
151 SMSC_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
152 SMSC_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
153 SMSC_WRITE_INDEXED(0x08, 0xe8); /* GP20 = nIDE2_OE */
154
155 /* Exit the configuration state */
156 outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
157
158 return 0;
159}
160device_initcall(smsc_superio_setup);