blob: 2e0796a0003f470a56508180be7c75a7a505983f [file] [log] [blame]
Mika Westerbergcd7bed02013-01-22 12:26:28 +02001/*
2 * PXA2xx SPI private DMA support.
3 *
4 * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
Mika Westerbergcd7bed02013-01-22 12:26:28 +020015 */
16
Mika Westerbergcd7bed02013-01-22 12:26:28 +020017#include <linux/delay.h>
18#include <linux/device.h>
19#include <linux/dma-mapping.h>
20#include <linux/pxa2xx_ssp.h>
21#include <linux/spi/spi.h>
22#include <linux/spi/pxa2xx_spi.h>
23
Rob Herring9064bf32015-02-03 17:03:35 -060024#include <mach/dma.h>
Mika Westerbergcd7bed02013-01-22 12:26:28 +020025#include "spi-pxa2xx.h"
26
27#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
28#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
29
30bool pxa2xx_spi_dma_is_possible(size_t len)
31{
32 /* Try to map dma buffer and do a dma transfer if successful, but
33 * only if the length is non-zero and less than MAX_DMA_LEN.
34 *
35 * Zero-length non-descriptor DMA is illegal on PXA2xx; force use
36 * of PIO instead. Care is needed above because the transfer may
37 * have have been passed with buffers that are already dma mapped.
38 * A zero-length transfer in PIO mode will not try to write/read
39 * to/from the buffers
40 *
41 * REVISIT large transfers are exactly where we most want to be
42 * using DMA. If this happens much, split those transfers into
43 * multiple DMA segments rather than forcing PIO.
44 */
45 return len > 0 && len <= MAX_DMA_LEN;
46}
47
48int pxa2xx_spi_map_dma_buffers(struct driver_data *drv_data)
49{
50 struct spi_message *msg = drv_data->cur_msg;
51 struct device *dev = &msg->spi->dev;
52
53 if (!drv_data->cur_chip->enable_dma)
54 return 0;
55
56 if (msg->is_dma_mapped)
57 return drv_data->rx_dma && drv_data->tx_dma;
58
59 if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx))
60 return 0;
61
62 /* Modify setup if rx buffer is null */
63 if (drv_data->rx == NULL) {
64 *drv_data->null_dma_buf = 0;
65 drv_data->rx = drv_data->null_dma_buf;
66 drv_data->rx_map_len = 4;
67 } else
68 drv_data->rx_map_len = drv_data->len;
69
70
71 /* Modify setup if tx buffer is null */
72 if (drv_data->tx == NULL) {
73 *drv_data->null_dma_buf = 0;
74 drv_data->tx = drv_data->null_dma_buf;
75 drv_data->tx_map_len = 4;
76 } else
77 drv_data->tx_map_len = drv_data->len;
78
79 /* Stream map the tx buffer. Always do DMA_TO_DEVICE first
80 * so we flush the cache *before* invalidating it, in case
81 * the tx and rx buffers overlap.
82 */
83 drv_data->tx_dma = dma_map_single(dev, drv_data->tx,
84 drv_data->tx_map_len, DMA_TO_DEVICE);
85 if (dma_mapping_error(dev, drv_data->tx_dma))
86 return 0;
87
88 /* Stream map the rx buffer */
89 drv_data->rx_dma = dma_map_single(dev, drv_data->rx,
90 drv_data->rx_map_len, DMA_FROM_DEVICE);
91 if (dma_mapping_error(dev, drv_data->rx_dma)) {
92 dma_unmap_single(dev, drv_data->tx_dma,
93 drv_data->tx_map_len, DMA_TO_DEVICE);
94 return 0;
95 }
96
97 return 1;
98}
99
100static void pxa2xx_spi_unmap_dma_buffers(struct driver_data *drv_data)
101{
102 struct device *dev;
103
104 if (!drv_data->dma_mapped)
105 return;
106
107 if (!drv_data->cur_msg->is_dma_mapped) {
108 dev = &drv_data->cur_msg->spi->dev;
109 dma_unmap_single(dev, drv_data->rx_dma,
110 drv_data->rx_map_len, DMA_FROM_DEVICE);
111 dma_unmap_single(dev, drv_data->tx_dma,
112 drv_data->tx_map_len, DMA_TO_DEVICE);
113 }
114
115 drv_data->dma_mapped = 0;
116}
117
Jarkko Nikula8e8dd9f2014-12-18 15:04:22 +0200118static int wait_ssp_rx_stall(struct driver_data *drv_data)
Mika Westerbergcd7bed02013-01-22 12:26:28 +0200119{
120 unsigned long limit = loops_per_jiffy << 1;
121
Jarkko Nikulac039dd22014-12-18 15:04:23 +0200122 while ((pxa2xx_spi_read(drv_data, SSSR) & SSSR_BSY) && --limit)
Mika Westerbergcd7bed02013-01-22 12:26:28 +0200123 cpu_relax();
124
125 return limit;
126}
127
128static int wait_dma_channel_stop(int channel)
129{
130 unsigned long limit = loops_per_jiffy << 1;
131
132 while (!(DCSR(channel) & DCSR_STOPSTATE) && --limit)
133 cpu_relax();
134
135 return limit;
136}
137
138static void pxa2xx_spi_dma_error_stop(struct driver_data *drv_data,
139 const char *msg)
140{
Mika Westerbergcd7bed02013-01-22 12:26:28 +0200141 /* Stop and reset */
142 DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
143 DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
144 write_SSSR_CS(drv_data, drv_data->clear_sr);
Jarkko Nikulac039dd22014-12-18 15:04:23 +0200145 pxa2xx_spi_write(drv_data, SSCR1,
146 pxa2xx_spi_read(drv_data, SSCR1)
147 & ~drv_data->dma_cr1);
Mika Westerbergcd7bed02013-01-22 12:26:28 +0200148 if (!pxa25x_ssp_comp(drv_data))
Jarkko Nikulac039dd22014-12-18 15:04:23 +0200149 pxa2xx_spi_write(drv_data, SSTO, 0);
Mika Westerbergcd7bed02013-01-22 12:26:28 +0200150 pxa2xx_spi_flush(drv_data);
Jarkko Nikulac039dd22014-12-18 15:04:23 +0200151 pxa2xx_spi_write(drv_data, SSCR0,
152 pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
Mika Westerbergcd7bed02013-01-22 12:26:28 +0200153
154 pxa2xx_spi_unmap_dma_buffers(drv_data);
155
156 dev_err(&drv_data->pdev->dev, "%s\n", msg);
157
158 drv_data->cur_msg->state = ERROR_STATE;
159 tasklet_schedule(&drv_data->pump_transfers);
160}
161
162static void pxa2xx_spi_dma_transfer_complete(struct driver_data *drv_data)
163{
Mika Westerbergcd7bed02013-01-22 12:26:28 +0200164 struct spi_message *msg = drv_data->cur_msg;
165
166 /* Clear and disable interrupts on SSP and DMA channels*/
Jarkko Nikulac039dd22014-12-18 15:04:23 +0200167 pxa2xx_spi_write(drv_data, SSCR1,
168 pxa2xx_spi_read(drv_data, SSCR1)
169 & ~drv_data->dma_cr1);
Mika Westerbergcd7bed02013-01-22 12:26:28 +0200170 write_SSSR_CS(drv_data, drv_data->clear_sr);
171 DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
172 DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
173
174 if (wait_dma_channel_stop(drv_data->rx_channel) == 0)
175 dev_err(&drv_data->pdev->dev,
176 "dma_handler: dma rx channel stop failed\n");
177
178 if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
179 dev_err(&drv_data->pdev->dev,
180 "dma_transfer: ssp rx stall failed\n");
181
182 pxa2xx_spi_unmap_dma_buffers(drv_data);
183
184 /* update the buffer pointer for the amount completed in dma */
185 drv_data->rx += drv_data->len -
186 (DCMD(drv_data->rx_channel) & DCMD_LENGTH);
187
188 /* read trailing data from fifo, it does not matter how many
189 * bytes are in the fifo just read until buffer is full
190 * or fifo is empty, which ever occurs first */
191 drv_data->read(drv_data);
192
193 /* return count of what was actually read */
194 msg->actual_length += drv_data->len -
195 (drv_data->rx_end - drv_data->rx);
196
197 /* Transfer delays and chip select release are
198 * handled in pump_transfers or giveback
199 */
200
201 /* Move to next transfer */
202 msg->state = pxa2xx_spi_next_transfer(drv_data);
203
204 /* Schedule transfer tasklet */
205 tasklet_schedule(&drv_data->pump_transfers);
206}
207
208void pxa2xx_spi_dma_handler(int channel, void *data)
209{
210 struct driver_data *drv_data = data;
211 u32 irq_status = DCSR(channel) & DMA_INT_MASK;
212
213 if (irq_status & DCSR_BUSERR) {
214
215 if (channel == drv_data->tx_channel)
216 pxa2xx_spi_dma_error_stop(drv_data,
217 "dma_handler: bad bus address on tx channel");
218 else
219 pxa2xx_spi_dma_error_stop(drv_data,
220 "dma_handler: bad bus address on rx channel");
221 return;
222 }
223
224 /* PXA255x_SSP has no timeout interrupt, wait for tailing bytes */
225 if ((channel == drv_data->tx_channel)
226 && (irq_status & DCSR_ENDINTR)
227 && (drv_data->ssp_type == PXA25x_SSP)) {
228
229 /* Wait for rx to stall */
Jarkko Nikula8e8dd9f2014-12-18 15:04:22 +0200230 if (wait_ssp_rx_stall(drv_data) == 0)
Mika Westerbergcd7bed02013-01-22 12:26:28 +0200231 dev_err(&drv_data->pdev->dev,
232 "dma_handler: ssp rx stall failed\n");
233
234 /* finish this transfer, start the next */
235 pxa2xx_spi_dma_transfer_complete(drv_data);
236 }
237}
238
239irqreturn_t pxa2xx_spi_dma_transfer(struct driver_data *drv_data)
240{
241 u32 irq_status;
Mika Westerbergcd7bed02013-01-22 12:26:28 +0200242
Jarkko Nikulac039dd22014-12-18 15:04:23 +0200243 irq_status = pxa2xx_spi_read(drv_data, SSSR) & drv_data->mask_sr;
Mika Westerbergcd7bed02013-01-22 12:26:28 +0200244 if (irq_status & SSSR_ROR) {
245 pxa2xx_spi_dma_error_stop(drv_data,
246 "dma_transfer: fifo overrun");
247 return IRQ_HANDLED;
248 }
249
250 /* Check for false positive timeout */
251 if ((irq_status & SSSR_TINT)
252 && (DCSR(drv_data->tx_channel) & DCSR_RUN)) {
Jarkko Nikulac039dd22014-12-18 15:04:23 +0200253 pxa2xx_spi_write(drv_data, SSSR, SSSR_TINT);
Mika Westerbergcd7bed02013-01-22 12:26:28 +0200254 return IRQ_HANDLED;
255 }
256
257 if (irq_status & SSSR_TINT || drv_data->rx == drv_data->rx_end) {
258
259 /* Clear and disable timeout interrupt, do the rest in
260 * dma_transfer_complete */
261 if (!pxa25x_ssp_comp(drv_data))
Jarkko Nikulac039dd22014-12-18 15:04:23 +0200262 pxa2xx_spi_write(drv_data, SSTO, 0);
Mika Westerbergcd7bed02013-01-22 12:26:28 +0200263
264 /* finish this transfer, start the next */
265 pxa2xx_spi_dma_transfer_complete(drv_data);
266
267 return IRQ_HANDLED;
268 }
269
270 /* Opps problem detected */
271 return IRQ_NONE;
272}
273
274int pxa2xx_spi_dma_prepare(struct driver_data *drv_data, u32 dma_burst)
275{
276 u32 dma_width;
277
278 switch (drv_data->n_bytes) {
279 case 1:
280 dma_width = DCMD_WIDTH1;
281 break;
282 case 2:
283 dma_width = DCMD_WIDTH2;
284 break;
285 default:
286 dma_width = DCMD_WIDTH4;
287 break;
288 }
289
290 /* Setup rx DMA Channel */
291 DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
292 DSADR(drv_data->rx_channel) = drv_data->ssdr_physical;
293 DTADR(drv_data->rx_channel) = drv_data->rx_dma;
294 if (drv_data->rx == drv_data->null_dma_buf)
295 /* No target address increment */
296 DCMD(drv_data->rx_channel) = DCMD_FLOWSRC
297 | dma_width
298 | dma_burst
299 | drv_data->len;
300 else
301 DCMD(drv_data->rx_channel) = DCMD_INCTRGADDR
302 | DCMD_FLOWSRC
303 | dma_width
304 | dma_burst
305 | drv_data->len;
306
307 /* Setup tx DMA Channel */
308 DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
309 DSADR(drv_data->tx_channel) = drv_data->tx_dma;
310 DTADR(drv_data->tx_channel) = drv_data->ssdr_physical;
311 if (drv_data->tx == drv_data->null_dma_buf)
312 /* No source address increment */
313 DCMD(drv_data->tx_channel) = DCMD_FLOWTRG
314 | dma_width
315 | dma_burst
316 | drv_data->len;
317 else
318 DCMD(drv_data->tx_channel) = DCMD_INCSRCADDR
319 | DCMD_FLOWTRG
320 | dma_width
321 | dma_burst
322 | drv_data->len;
323
324 /* Enable dma end irqs on SSP to detect end of transfer */
325 if (drv_data->ssp_type == PXA25x_SSP)
326 DCMD(drv_data->tx_channel) |= DCMD_ENDIRQEN;
327
328 return 0;
329}
330
331void pxa2xx_spi_dma_start(struct driver_data *drv_data)
332{
333 DCSR(drv_data->rx_channel) |= DCSR_RUN;
334 DCSR(drv_data->tx_channel) |= DCSR_RUN;
335}
336
337int pxa2xx_spi_dma_setup(struct driver_data *drv_data)
338{
339 struct device *dev = &drv_data->pdev->dev;
340 struct ssp_device *ssp = drv_data->ssp;
341
342 /* Get two DMA channels (rx and tx) */
343 drv_data->rx_channel = pxa_request_dma("pxa2xx_spi_ssp_rx",
344 DMA_PRIO_HIGH,
345 pxa2xx_spi_dma_handler,
346 drv_data);
347 if (drv_data->rx_channel < 0) {
348 dev_err(dev, "problem (%d) requesting rx channel\n",
349 drv_data->rx_channel);
350 return -ENODEV;
351 }
352 drv_data->tx_channel = pxa_request_dma("pxa2xx_spi_ssp_tx",
353 DMA_PRIO_MEDIUM,
354 pxa2xx_spi_dma_handler,
355 drv_data);
356 if (drv_data->tx_channel < 0) {
357 dev_err(dev, "problem (%d) requesting tx channel\n",
358 drv_data->tx_channel);
359 pxa_free_dma(drv_data->rx_channel);
360 return -ENODEV;
361 }
362
363 DRCMR(ssp->drcmr_rx) = DRCMR_MAPVLD | drv_data->rx_channel;
364 DRCMR(ssp->drcmr_tx) = DRCMR_MAPVLD | drv_data->tx_channel;
365
366 return 0;
367}
368
369void pxa2xx_spi_dma_release(struct driver_data *drv_data)
370{
371 struct ssp_device *ssp = drv_data->ssp;
372
373 DRCMR(ssp->drcmr_rx) = 0;
374 DRCMR(ssp->drcmr_tx) = 0;
375
376 if (drv_data->tx_channel != 0)
377 pxa_free_dma(drv_data->tx_channel);
378 if (drv_data->rx_channel != 0)
379 pxa_free_dma(drv_data->rx_channel);
380}
381
382void pxa2xx_spi_dma_resume(struct driver_data *drv_data)
383{
384 if (drv_data->rx_channel != -1)
385 DRCMR(drv_data->ssp->drcmr_rx) =
386 DRCMR_MAPVLD | drv_data->rx_channel;
387 if (drv_data->tx_channel != -1)
388 DRCMR(drv_data->ssp->drcmr_tx) =
389 DRCMR_MAPVLD | drv_data->tx_channel;
390}
391
392int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip,
393 struct spi_device *spi,
394 u8 bits_per_word, u32 *burst_code,
395 u32 *threshold)
396{
397 struct pxa2xx_spi_chip *chip_info =
398 (struct pxa2xx_spi_chip *)spi->controller_data;
399 int bytes_per_word;
400 int burst_bytes;
401 int thresh_words;
402 int req_burst_size;
403 int retval = 0;
404
405 /* Set the threshold (in registers) to equal the same amount of data
406 * as represented by burst size (in bytes). The computation below
407 * is (burst_size rounded up to nearest 8 byte, word or long word)
408 * divided by (bytes/register); the tx threshold is the inverse of
409 * the rx, so that there will always be enough data in the rx fifo
410 * to satisfy a burst, and there will always be enough space in the
411 * tx fifo to accept a burst (a tx burst will overwrite the fifo if
412 * there is not enough space), there must always remain enough empty
413 * space in the rx fifo for any data loaded to the tx fifo.
414 * Whenever burst_size (in bytes) equals bits/word, the fifo threshold
415 * will be 8, or half the fifo;
416 * The threshold can only be set to 2, 4 or 8, but not 16, because
417 * to burst 16 to the tx fifo, the fifo would have to be empty;
418 * however, the minimum fifo trigger level is 1, and the tx will
419 * request service when the fifo is at this level, with only 15 spaces.
420 */
421
422 /* find bytes/word */
423 if (bits_per_word <= 8)
424 bytes_per_word = 1;
425 else if (bits_per_word <= 16)
426 bytes_per_word = 2;
427 else
428 bytes_per_word = 4;
429
430 /* use struct pxa2xx_spi_chip->dma_burst_size if available */
431 if (chip_info)
432 req_burst_size = chip_info->dma_burst_size;
433 else {
434 switch (chip->dma_burst_size) {
435 default:
436 /* if the default burst size is not set,
437 * do it now */
438 chip->dma_burst_size = DCMD_BURST8;
439 case DCMD_BURST8:
440 req_burst_size = 8;
441 break;
442 case DCMD_BURST16:
443 req_burst_size = 16;
444 break;
445 case DCMD_BURST32:
446 req_burst_size = 32;
447 break;
448 }
449 }
450 if (req_burst_size <= 8) {
451 *burst_code = DCMD_BURST8;
452 burst_bytes = 8;
453 } else if (req_burst_size <= 16) {
454 if (bytes_per_word == 1) {
455 /* don't burst more than 1/2 the fifo */
456 *burst_code = DCMD_BURST8;
457 burst_bytes = 8;
458 retval = 1;
459 } else {
460 *burst_code = DCMD_BURST16;
461 burst_bytes = 16;
462 }
463 } else {
464 if (bytes_per_word == 1) {
465 /* don't burst more than 1/2 the fifo */
466 *burst_code = DCMD_BURST8;
467 burst_bytes = 8;
468 retval = 1;
469 } else if (bytes_per_word == 2) {
470 /* don't burst more than 1/2 the fifo */
471 *burst_code = DCMD_BURST16;
472 burst_bytes = 16;
473 retval = 1;
474 } else {
475 *burst_code = DCMD_BURST32;
476 burst_bytes = 32;
477 }
478 }
479
480 thresh_words = burst_bytes / bytes_per_word;
481
482 /* thresh_words will be between 2 and 8 */
483 *threshold = (SSCR1_RxTresh(thresh_words) & SSCR1_RFT)
484 | (SSCR1_TxTresh(16-thresh_words) & SSCR1_TFT);
485
486 return retval;
487}