Blame - drivers/regulator/Kconfig - kernel/msm-4.9

blob: 67d47b59a66d878c9188afaaa62b92f255d657bb [file] [log] [blame]

Takashi Iwai	bbda14d	2008-10-30 15:57:05 +0100	[diff] [blame]	1	menuconfig REGULATOR
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	2	bool "Voltage and Current Regulator Support"
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	3	help
				4	Generic Voltage and Current Regulator support.
				5
				6	This framework is designed to provide a generic interface to voltage
				7	and current regulators within the Linux kernel. It's intended to
				8	provide voltage and current control to client or consumer drivers and
				9	also provide status information to user space applications through a
				10	sysfs interface.
				11
				12	The intention is to allow systems to dynamically control regulator
				13	output in order to save power and prolong battery life. This applies
				14	to both voltage regulators (where voltage output is controllable) and
				15	current sinks (where current output is controllable).
				16
				17	This framework safely compiles out if not selected so that client
				18	drivers can still be used in systems with no software controllable
				19	regulators.
				20
				21	If unsure, say no.
				22
Mark Brown	809d310	2012-06-20 11:08:43 +0100	[diff] [blame]	23
Takashi Iwai	bbda14d	2008-10-30 15:57:05 +0100	[diff] [blame]	24	if REGULATOR
				25
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	26	config REGULATOR_DEBUG
				27	bool "Regulator debug support"
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	28	help
				29	Say yes here to enable debugging support.
				30
Mark Brown	34abbd6	2010-02-12 10:18:08 +0000	[diff] [blame]	31	config REGULATOR_DUMMY
				32	bool "Provide a dummy regulator if regulator lookups fail"
				33	help
				34	If this option is enabled then when a regulator lookup fails
				35	and the board has not specified that it has provided full
Mark Brown	4f842f6	2012-07-26 15:50:49 +0100	[diff] [blame]	36	constraints the regulator core will provide an always
				37	enabled dummy regulator, allowing consumer drivers to continue.
Mark Brown	34abbd6	2010-02-12 10:18:08 +0000	[diff] [blame]	38
				39	A warning will be generated when this substitution is done.
				40
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	41	config REGULATOR_FIXED_VOLTAGE
Mark Brown	a9cb63b	2009-01-19 13:37:05 +0000	[diff] [blame]	42	tristate "Fixed voltage regulator support"
Mark Brown	a9cb63b	2009-01-19 13:37:05 +0000	[diff] [blame]	43	help
				44	This driver provides support for fixed voltage regulators,
				45	useful for systems which use a combination of software
				46	managed regulators and simple non-configurable regulators.
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	47
				48	config REGULATOR_VIRTUAL_CONSUMER
				49	tristate "Virtual regulator consumer support"
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	50	help
				51	This driver provides a virtual consumer for the voltage and
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	52	current regulator API which provides sysfs controls for
				53	configuring the supplies requested. This is mainly useful
				54	for test purposes.
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	55
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	56	If unsure, say no.
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	57
Mike Rapoport	1d98ccc	2009-04-26 16:49:39 +0300	[diff] [blame]	58	config REGULATOR_USERSPACE_CONSUMER
				59	tristate "Userspace regulator consumer support"
Mike Rapoport	1d98ccc	2009-04-26 16:49:39 +0300	[diff] [blame]	60	help
				61	There are some classes of devices that are controlled entirely
Michael Prokop	6f2653e	2009-09-05 02:59:14 +0200	[diff] [blame]	62	from user space. Userspace consumer driver provides ability to
Mike Rapoport	1d98ccc	2009-04-26 16:49:39 +0300	[diff] [blame]	63	control power supplies for such devices.
				64
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	65	If unsure, say no.
Mike Rapoport	1d98ccc	2009-04-26 16:49:39 +0300	[diff] [blame]	66
Heiko Stübner	3f0292a	2011-10-05 12:27:05 +0200	[diff] [blame]	67	config REGULATOR_GPIO
				68	tristate "GPIO regulator support"
Heiko Stübner	d162b3c	2011-10-11 23:11:01 +0200	[diff] [blame]	69	depends on GENERIC_GPIO
Heiko Stübner	3f0292a	2011-10-05 12:27:05 +0200	[diff] [blame]	70	help
				71	This driver provides support for regulators that can be
				72	controlled via gpios.
				73	It is capable of supporting current and voltage regulators
				74	and the platform has to provide a mapping of GPIO-states
				75	to target volts/amps.
				76
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	77	config REGULATOR_AD5398
				78	tristate "Analog Devices AD5398/AD5821 regulators"
				79	depends on I2C
Philipp Zabel	0eb5d5a	2008-07-11 17:28:06 +0200	[diff] [blame]	80	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	81	This driver supports AD5398 and AD5821 current regulator chips.
				82	If building into module, its name is ad5398.ko.
				83
				84	config REGULATOR_AAT2870
				85	tristate "AnalogicTech AAT2870 Regulators"
				86	depends on MFD_AAT2870_CORE
				87	help
				88	If you have a AnalogicTech AAT2870 say Y to enable the
				89	regulator driver.
				90
Mark Brown	b667a45	2012-06-14 18:14:00 +0100	[diff] [blame]	91	config REGULATOR_ARIZONA
				92	tristate "Wolfson Arizona class devices"
				93	depends on MFD_ARIZONA
				94	help
				95	Support for the regulators found on Wolfson Arizona class
				96	devices.
				97
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	98	config REGULATOR_DA903X
				99	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
				100	depends on PMIC_DA903X
				101	help
				102	Say y here to support the BUCKs and LDOs regulators found on
				103	Dialog Semiconductor DA9030/DA9034 PMIC.
				104
				105	config REGULATOR_DA9052
				106	tristate "Dialog Semiconductor DA9052/DA9053 regulators"
				107	depends on PMIC_DA9052
				108	help
				109	This driver supports the voltage regulators of DA9052-BC and
				110	DA9053-AA/Bx PMIC.
				111
Yunfan Zhang	49d8c59	2012-09-08 03:52:18 -0700	[diff] [blame]	112	config REGULATOR_FAN53555
				113	tristate "Fairchild FAN53555 Regulator"
				114	depends on I2C
				115	select REGMAP_I2C
				116	help
				117	This driver supports Fairchild FAN53555 Digitally Programmable
				118	TinyBuck Regulator. The FAN53555 is a step-down switching voltage
				119	regulator that delivers a digitally programmable output from an
				120	input voltage supply of 2.5V to 5.5V. The output voltage is
				121	programmed through an I2C interface.
				122
Ying-Chun Liu (PaulLiu)	e3e5aff	2012-03-14 10:29:12 +0800	[diff] [blame]	123	config REGULATOR_ANATOP
				124	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
Dong Aisheng	baa6415	2012-09-05 10:57:15 +0800	[diff] [blame]	125	depends on MFD_SYSCON
Ying-Chun Liu (PaulLiu)	e3e5aff	2012-03-14 10:29:12 +0800	[diff] [blame]	126	help
				127	Say y here to support Freescale i.MX on-chip ANATOP LDOs
				128	regulators. It is recommended that this option be
				129	enabled on i.MX6 platform.
				130
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	131	config REGULATOR_MC13XXX_CORE
				132	tristate
				133
				134	config REGULATOR_MC13783
				135	tristate "Freescale MC13783 regulator driver"
				136	depends on MFD_MC13783
				137	select REGULATOR_MC13XXX_CORE
				138	help
				139	Say y here to support the regulators found on the Freescale MC13783
				140	PMIC.
				141
				142	config REGULATOR_MC13892
				143	tristate "Freescale MC13892 regulator driver"
				144	depends on MFD_MC13XXX
				145	select REGULATOR_MC13XXX_CORE
				146	help
				147	Say y here to support the regulators found on the Freescale MC13892
				148	PMIC.
				149
				150	config REGULATOR_ISL6271A
				151	tristate "Intersil ISL6271A Power regulator"
				152	depends on I2C
				153	help
				154	This driver supports ISL6271A voltage regulator chip.
				155
				156	config REGULATOR_88PM8607
				157	bool "Marvell 88PM8607 Power regulators"
				158	depends on MFD_88PM860X=y
				159	help
				160	This driver supports 88PM8607 voltage regulator chips.
Philipp Zabel	0eb5d5a	2008-07-11 17:28:06 +0200	[diff] [blame]	161
Robert Jarzmik	55f4fa4	2009-04-23 20:10:43 +0200	[diff] [blame]	162	config REGULATOR_MAX1586
				163	tristate "Maxim 1586/1587 voltage regulator"
				164	depends on I2C
Robert Jarzmik	55f4fa4	2009-04-23 20:10:43 +0200	[diff] [blame]	165	help
				166	This driver controls a Maxim 1586 or 1587 voltage output
				167	regulator via I2C bus. The provided regulator is suitable
				168	for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
				169
Haojian Zhuang	a71b797	2010-01-25 10:24:09 -0500	[diff] [blame]	170	config REGULATOR_MAX8649
				171	tristate "Maxim 8649 voltage regulator"
				172	depends on I2C
Jonghwan Choi	c5b68d47	2011-10-24 22:26:26 +0900	[diff] [blame]	173	select REGMAP_I2C
Haojian Zhuang	a71b797	2010-01-25 10:24:09 -0500	[diff] [blame]	174	help
				175	This driver controls a Maxim 8649 voltage output regulator via
				176	I2C bus.
				177
Wolfram Sang	27f37e4	2009-09-25 09:39:26 +0200	[diff] [blame]	178	config REGULATOR_MAX8660
				179	tristate "Maxim 8660/8661 voltage regulator"
				180	depends on I2C
				181	help
				182	This driver controls a Maxim 8660/8661 voltage output
				183	regulator via I2C bus.
				184
Gyungoh Yoo	ffee190	2012-08-09 14:24:34 -0600	[diff] [blame]	185	config REGULATOR_MAX8907
				186	tristate "Maxim 8907 voltage regulator"
				187	depends on MFD_MAX8907
				188	help
				189	This driver controls a Maxim 8907 voltage output regulator
				190	via I2C bus. The provided regulator is suitable for Tegra
				191	chip to control Step-Down DC-DC and LDOs.
				192
Haojian Zhuang	08ff6f2	2010-01-11 13:10:08 +0100	[diff] [blame]	193	config REGULATOR_MAX8925
				194	tristate "Maxim MAX8925 Power Management IC"
				195	depends on MFD_MAX8925
				196	help
				197	Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
				198
MyungJoo Ham	202f4f5	2010-08-20 14:43:56 +0900	[diff] [blame]	199	config REGULATOR_MAX8952
				200	tristate "Maxim MAX8952 Power Management IC"
				201	depends on I2C
				202	help
				203	This driver controls a Maxim 8952 voltage output regulator
				204	via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
				205	modes ranging from 0.77V to 1.40V by 0.01V steps.
				206
MyungJoo Ham	bd6ca2c	2011-03-11 11:34:44 +0900	[diff] [blame]	207	config REGULATOR_MAX8997
				208	tristate "Maxim 8997/8966 regulator"
				209	depends on MFD_MAX8997
				210	help
				211	This driver controls a Maxim 8997/8966 regulator
				212	via I2C bus. The provided regulator is suitable for S5PC110,
				213	S5PV210, and Exynos-4 chips to control VCC_CORE and
				214	VCC_USIM voltages.
				215
Kyungmin Park	156f252	2010-06-16 09:04:16 +0200	[diff] [blame]	216	config REGULATOR_MAX8998
				217	tristate "Maxim 8998 voltage regulator"
Marek Szyprowski	69f7100	2010-06-21 10:04:23 +0200	[diff] [blame]	218	depends on MFD_MAX8998
Kyungmin Park	156f252	2010-06-16 09:04:16 +0200	[diff] [blame]	219	help
				220	This driver controls a Maxim 8998 voltage output regulator
				221	via I2C bus. The provided regulator is suitable for S3C6410
				222	and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
				223
Jonghwa Lee	133d401	2012-06-01 13:17:14 +0900	[diff] [blame]	224	config REGULATOR_MAX77686
				225	tristate "Maxim 77686 regulator"
				226	depends on MFD_MAX77686
				227	help
				228	This driver controls a Maxim 77686 regulator
				229	via I2C bus. The provided regulator is suitable for
				230	Exynos-4 chips to control VARM and VINT voltages.
				231
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	232	config REGULATOR_PCAP
				233	tristate "Motorola PCAP2 regulator driver"
				234	depends on EZX_PCAP
Sangbeom Kim	62aa492	2012-01-13 10:13:13 +0900	[diff] [blame]	235	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	236	This driver provides support for the voltage regulators of the
				237	PCAP2 PMIC.
Balaji Rao	5ec271e	2009-01-09 01:51:01 +0100	[diff] [blame]	238
Marek Szyprowski	0cbdf7b	2009-05-19 07:33:55 +0200	[diff] [blame]	239	config REGULATOR_LP3971
				240	tristate "National Semiconductors LP3971 PMIC regulator driver"
				241	depends on I2C
				242	help
				243	Say Y here to support the voltage regulators and convertors
				244	on National Semiconductors LP3971 PMIC
				245
Axel Lin	5976f09	2010-09-16 16:48:49 +0800	[diff] [blame]	246	config REGULATOR_LP3972
				247	tristate "National Semiconductors LP3972 PMIC regulator driver"
				248	depends on I2C
				249	help
				250	Say Y here to support the voltage regulators and convertors
				251	on National Semiconductors LP3972 PMIC
				252
Kim, Milo	af8b5fc	2012-06-19 07:08:22 +0000	[diff] [blame]	253	config REGULATOR_LP872X
Mark Brown	809d310	2012-06-20 11:08:43 +0100	[diff] [blame]	254	bool "TI/National Semiconductor LP8720/LP8725 voltage regulators"
Mark Brown	dc2060c	2012-06-21 10:35:58 +0100	[diff] [blame]	255	depends on I2C=y
Kim, Milo	af8b5fc	2012-06-19 07:08:22 +0000	[diff] [blame]	256	select REGMAP_I2C
				257	help
				258	This driver supports LP8720/LP8725 PMIC
				259
Kim, Milo	ade7515	2012-07-18 14:32:57 +0000	[diff] [blame]	260	config REGULATOR_LP8788
				261	bool "TI LP8788 Power Regulators"
				262	depends on MFD_LP8788
				263	help
				264	This driver supports LP8788 voltage regulator chip.
				265
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	266	config REGULATOR_PCF50633
				267	tristate "NXP PCF50633 regulator driver"
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	268	depends on MFD_PCF50633
Daniel Ribeiro	39b1772	2009-06-27 00:18:02 -0300	[diff] [blame]	269	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	270	Say Y here to support the voltage regulators and convertors
				271	on PCF50633
Daniel Ribeiro	39b1772	2009-06-27 00:18:02 -0300	[diff] [blame]	272
Laxman Dewangan	6ffc327	2012-04-04 12:44:00 +0530	[diff] [blame]	273	config REGULATOR_RC5T583
				274	tristate "RICOH RC5T583 Power regulators"
				275	depends on MFD_RC5T583
				276	help
				277	Select this option to enable the power regulator of RICOH
				278	PMIC RC5T583.
				279	This driver supports the control of different power rails of device
				280	through regulator interface. The device supports multiple DCDC/LDO
				281	outputs which can be controlled by i2c communication.
				282
Sangbeom Kim	cb74685	2012-07-11 21:08:17 +0900	[diff] [blame]	283	config REGULATOR_S2MPS11
				284	tristate "Samsung S2MPS11 voltage regulator"
				285	depends on MFD_SEC_CORE
				286	help
				287	This driver supports a Samsung S2MPS11 voltage output regulator
				288	via I2C bus. S2MPS11 is comprised of high efficient Buck converters
				289	including Dual-Phase Buck converter, Buck-Boost converter, various LDOs.
				290
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	291	config REGULATOR_S5M8767
				292	tristate "Samsung S5M8767A voltage regulator"
Sangbeom Kim	66c9fbb	2012-07-11 21:06:40 +0900	[diff] [blame]	293	depends on MFD_SEC_CORE
Sascha Hauer	295c08b	2009-08-19 01:43:50 +0200	[diff] [blame]	294	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	295	This driver supports a Samsung S5M8767A voltage output regulator
				296	via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
				297	supports DVS mode with 8bits of output voltage control.
Yong Shen	5e428d5	2010-12-14 14:00:55 +0800	[diff] [blame]	298
Linus Walleij	d619bc1	2009-09-09 11:31:00 +0200	[diff] [blame]	299	config REGULATOR_AB3100
				300	tristate "ST-Ericsson AB3100 Regulator functions"
				301	depends on AB3100_CORE
				302	default y if AB3100_CORE
				303	help
				304	These regulators correspond to functionality in the
				305	AB3100 analog baseband dealing with power regulators
				306	for the system.
				307
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	308	config REGULATOR_AB8500
				309	bool "ST-Ericsson AB8500 Power Regulators"
				310	depends on AB8500_CORE
				311	help
				312	This driver supports the regulators found on the ST-Ericsson mixed
				313	signal AB8500 PMIC
				314
				315	config REGULATOR_DBX500_PRCMU
				316	bool
				317
				318	config REGULATOR_DB8500_PRCMU
				319	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
				320	depends on MFD_DB8500_PRCMU
				321	select REGULATOR_DBX500_PRCMU
				322	help
				323	This driver supports the voltage domain regulators controlled by the
				324	DB8500 PRCMU
				325
Graeme Gregory	4c5dabc	2012-05-15 15:48:59 +0900	[diff] [blame]	326	config REGULATOR_PALMAS
				327	tristate "TI Palmas PMIC Regulators"
				328	depends on MFD_PALMAS
				329	help
				330	If you wish to control the regulators on the Palmas series of
				331	chips say Y here. This will enable support for all the software
				332	controllable SMPS/LDO regulators.
				333
				334	The regulators available on Palmas series chips vary depending
				335	on the muxing. This is handled automatically in the driver by
				336	reading the mux info from OTP.
				337
Linus Walleij	2edd3b6	2011-03-09 12:02:55 +0000	[diff] [blame]	338	config REGULATOR_TPS6105X
				339	tristate "TI TPS6105X Power regulators"
				340	depends on TPS6105X
				341	default y if TPS6105X
				342	help
				343	This driver supports TPS61050/TPS61052 voltage regulator chips.
				344	It is a single boost converter primarily for white LEDs and
				345	audio amplifiers.
				346
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	347	config REGULATOR_TPS62360
Axel Lin	d1cf4f6	2012-04-02 18:19:28 +0800	[diff] [blame]	348	tristate "TI TPS6236x Power Regulator"
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	349	depends on I2C
				350	select REGMAP_I2C
				351	help
Axel Lin	d1cf4f6	2012-04-02 18:19:28 +0800	[diff] [blame]	352	This driver supports TPS6236x voltage regulator chip. This
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	353	regulator is meant for processor core supply. This chip is
				354	high-frequency synchronous step down dc-dc converter optimized
				355	for battery-powered portable applications.
				356
Anuj Aggarwal	2de7985	2009-08-21 00:39:44 +0530	[diff] [blame]	357	config REGULATOR_TPS65023
				358	tristate "TI TPS65023 Power regulators"
				359	depends on I2C
Mark Brown	9092335	2011-06-18 01:18:51 +0100	[diff] [blame]	360	select REGMAP_I2C
Anuj Aggarwal	2de7985	2009-08-21 00:39:44 +0530	[diff] [blame]	361	help
				362	This driver supports TPS65023 voltage regulator chips. TPS65023 provides
				363	three step-down converters and two general-purpose LDO voltage regulators.
				364	It supports TI's software based Class-2 SmartReflex implementation.
				365
				366	config REGULATOR_TPS6507X
				367	tristate "TI TPS6507X Power regulators"
				368	depends on I2C
				369	help
				370	This driver supports TPS6507X voltage regulator chips. TPS6507X provides
				371	three step-down converters and two general-purpose LDO voltage regulators.
				372	It supports TI's software based Class-2 SmartReflex implementation.
				373
Venu Byravarasu	452534e	2012-03-22 18:34:09 +0530	[diff] [blame]	374	config REGULATOR_TPS65090
				375	tristate "TI TPS65090 Power regulator"
				376	depends on MFD_TPS65090
				377	help
				378	This driver provides support for the voltage regulators on the
				379	TI TPS65090 PMIC.
				380
AnilKumar Ch	a493077	2012-01-11 16:11:49 +0530	[diff] [blame]	381	config REGULATOR_TPS65217
				382	tristate "TI TPS65217 Power regulators"
				383	depends on MFD_TPS65217
				384	help
				385	This driver supports TPS65217 voltage regulator chips. TPS65217
				386	provides three step-down converters and four general-purpose LDO
				387	voltage regulators. It supports software based voltage control
				388	for different voltage domains
				389
Cyril Chemparathy	1394fd2	2010-12-07 12:04:11 -0500	[diff] [blame]	390	config REGULATOR_TPS6524X
				391	tristate "TI TPS6524X Power regulators"
				392	depends on SPI
				393	help
				394	This driver supports TPS6524X voltage regulator chips. TPS6524X
				395	provides three step-down converters and two general-purpose LDO
				396	voltage regulators. This device is interfaced using a customized
				397	serial interface currently supported on the sequencer serial
				398	port controller.
				399
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	400	config REGULATOR_TPS6586X
				401	tristate "TI TPS6586X Power regulators"
				402	depends on MFD_TPS6586X
				403	help
				404	This driver supports TPS6586X voltage regulator chips.
				405
Graeme Gregory	518fb72	2011-05-02 16:20:08 -0500	[diff] [blame]	406	config REGULATOR_TPS65910
Axel Lin	ae0e654	2012-02-21 10:14:55 +0800	[diff] [blame]	407	tristate "TI TPS65910/TPS65911 Power Regulators"
Graeme Gregory	518fb72	2011-05-02 16:20:08 -0500	[diff] [blame]	408	depends on MFD_TPS65910
				409	help
Axel Lin	ae0e654	2012-02-21 10:14:55 +0800	[diff] [blame]	410	This driver supports TPS65910/TPS65911 voltage regulator chips.
Graeme Gregory	518fb72	2011-05-02 16:20:08 -0500	[diff] [blame]	411
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	412	config REGULATOR_TPS65912
				413	tristate "TI TPS65912 Power regulator"
				414	depends on (MFD_TPS65912_I2C \|\| MFD_TPS65912_SPI)
Laxman Dewangan	6219929	2012-01-09 20:27:41 +0530	[diff] [blame]	415	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	416	This driver supports TPS65912 voltage regulator chip.
Laxman Dewangan	6219929	2012-01-09 20:27:41 +0530	[diff] [blame]	417
Mark Brown	da09155	2008-10-10 15:58:15 +0100	[diff] [blame]	418	config REGULATOR_TWL4030
				419	bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
				420	depends on TWL4030_CORE
Mark Brown	da09155	2008-10-10 15:58:15 +0100	[diff] [blame]	421	help
				422	This driver supports the voltage regulators provided by
				423	this family of companion chips.
				424
Mark Brown	42fad57	2008-09-11 11:12:01 +0100	[diff] [blame]	425	config REGULATOR_WM831X
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	426	tristate "Wolfson Microelectronics WM831x PMIC regulators"
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	427	depends on MFD_WM831X
				428	help
				429	Support the voltage and current regulators of the WM831x series
				430	of PMIC devices.
				431
Mark Brown	42fad57	2008-09-11 11:12:01 +0100	[diff] [blame]	432	config REGULATOR_WM8350
				433	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
				434	depends on MFD_WM8350
Mark Brown	42fad57	2008-09-11 11:12:01 +0100	[diff] [blame]	435	help
				436	This driver provides support for the voltage and current regulators
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	437	of the WM8350 AudioPlus PMIC.
Mark Brown	42fad57	2008-09-11 11:12:01 +0100	[diff] [blame]	438
				439	config REGULATOR_WM8400
				440	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
				441	depends on MFD_WM8400
				442	help
				443	This driver provides support for the voltage regulators of the
				444	WM8400 AudioPlus PMIC.
Mark Brown	da09155	2008-10-10 15:58:15 +0100	[diff] [blame]	445
Eric Miao	129eef9	2008-08-27 04:16:08 +0800	[diff] [blame]	446	config REGULATOR_WM8994
				447	tristate "Wolfson Microelectronics WM8994 CODEC"
				448	depends on MFD_WM8994
Eric Miao	129eef9	2008-08-27 04:16:08 +0800	[diff] [blame]	449	help
				450	This driver provides support for the voltage regulators on the
				451	WM8994 CODEC.
				452
Takashi Iwai	bbda14d	2008-10-30 15:57:05 +0100	[diff] [blame]	453	endif
Sascha Hauer	295c08b	2009-08-19 01:43:50 +0200	[diff] [blame]	454