blob: 11f143f4adf6d379682833679bb9ffa7cb99346c [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001
2#
3# Network device configuration
4#
5
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07006menuconfig NETDEVICES
Paolo 'Blaisorblade' Giarrussoce2d2ae2006-01-18 17:42:59 -08007 default y if UML
Jan Engelhardte0009822007-07-21 19:11:35 -07008 depends on NET
Linus Torvalds1da177e2005-04-16 15:20:36 -07009 bool "Network device support"
10 ---help---
11 You can say N here if you don't intend to connect your Linux box to
12 any other computer at all.
13
14 You'll have to say Y if your computer contains a network card that
15 you want to use under Linux. If you are going to run SLIP or PPP over
16 telephone line or null modem cable you need say Y here. Connecting
17 two machines with parallel ports using PLIP needs this, as well as
18 AX.25/KISS for sending Internet traffic over amateur radio links.
19
20 See also "The Linux Network Administrator's Guide" by Olaf Kirch and
21 Terry Dawson. Available at <http://www.tldp.org/guides.html>.
22
23 If unsure, say Y.
24
Randy Dunlap1618cb02006-09-25 23:11:21 -070025# All the following symbols are dependent on NETDEVICES - do not repeat
26# that for each of the symbols.
27if NETDEVICES
Randy Dunlapcbcd2a42005-07-27 13:04:35 -070028
Jamal Hadi Salim253af422006-01-08 22:34:25 -080029config IFB
30 tristate "Intermediate Functional Block support"
31 depends on NET_CLS_ACT
32 ---help---
Matt LaPlante3cb2fcc2006-11-30 05:22:59 +010033 This is an intermediate driver that allows sharing of
Jamal Hadi Salim253af422006-01-08 22:34:25 -080034 resources.
35 To compile this driver as a module, choose M here: the module
36 will be called ifb. If you want to use more than one ifb
37 device at a time, you need to compile this driver as a module.
38 Instead of 'ifb', the devices will then be called 'ifb0',
39 'ifb1' etc.
40 Look at the iproute2 documentation directory for usage etc
41
Linus Torvalds1da177e2005-04-16 15:20:36 -070042config DUMMY
43 tristate "Dummy net driver support"
Linus Torvalds1da177e2005-04-16 15:20:36 -070044 ---help---
45 This is essentially a bit-bucket device (i.e. traffic you send to
46 this device is consigned into oblivion) with a configurable IP
47 address. It is most commonly used in order to make your currently
48 inactive SLIP address seem like a real address for local programs.
49 If you use SLIP or PPP, you might want to say Y here. Since this
50 thing often comes in handy, the default is Y. It won't enlarge your
51 kernel either. What a deal. Read about it in the Network
52 Administrator's Guide, available from
53 <http://www.tldp.org/docs.html#guide>.
54
55 To compile this driver as a module, choose M here: the module
56 will be called dummy. If you want to use more than one dummy
57 device at a time, you need to compile this driver as a module.
58 Instead of 'dummy', the devices will then be called 'dummy0',
59 'dummy1' etc.
60
61config BONDING
62 tristate "Bonding driver support"
Linus Torvalds1da177e2005-04-16 15:20:36 -070063 depends on INET
64 ---help---
65 Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
66 Channels together. This is called 'Etherchannel' by Cisco,
67 'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
68
69 The driver supports multiple bonding modes to allow for both high
Jon Mason47c51432006-02-12 11:53:04 -060070 performance and high availability operation.
Linus Torvalds1da177e2005-04-16 15:20:36 -070071
72 Refer to <file:Documentation/networking/bonding.txt> for more
73 information.
74
75 To compile this driver as a module, choose M here: the module
76 will be called bonding.
77
Patrick McHardyb863ceb2007-07-14 18:55:06 -070078config MACVLAN
79 tristate "MAC-VLAN support (EXPERIMENTAL)"
80 depends on EXPERIMENTAL
81 ---help---
82 This allows one to create virtual interfaces that map packets to
83 or from specific MAC addresses to a particular interface.
84
Patrick McHardy3dbf8d52008-02-26 17:52:05 -080085 Macvlan devices can be added using the "ip" command from the
86 iproute2 package starting with the iproute2-2.6.23 release:
87
88 "ip link add link <real dev> [ address MAC ] [ NAME ] type macvlan"
89
Patrick McHardyb863ceb2007-07-14 18:55:06 -070090 To compile this driver as a module, choose M here: the module
91 will be called macvlan.
92
Linus Torvalds1da177e2005-04-16 15:20:36 -070093config EQUALIZER
94 tristate "EQL (serial line load balancing) support"
Linus Torvalds1da177e2005-04-16 15:20:36 -070095 ---help---
96 If you have two serial connections to some other computer (this
97 usually requires two modems and two telephone lines) and you use
98 SLIP (the protocol for sending Internet traffic over telephone
99 lines) or PPP (a better SLIP) on them, you can make them behave like
100 one double speed connection using this driver. Naturally, this has
101 to be supported at the other end as well, either with a similar EQL
102 Linux driver or with a Livingston Portmaster 2e.
103
104 Say Y if you want this and read
105 <file:Documentation/networking/eql.txt>. You may also want to read
106 section 6.2 of the NET-3-HOWTO, available from
107 <http://www.tldp.org/docs.html#howto>.
108
109 To compile this driver as a module, choose M here: the module
110 will be called eql. If unsure, say N.
111
112config TUN
113 tristate "Universal TUN/TAP device driver support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700114 select CRC32
115 ---help---
116 TUN/TAP provides packet reception and transmission for user space
117 programs. It can be viewed as a simple Point-to-Point or Ethernet
118 device, which instead of receiving packets from a physical media,
119 receives them from user space program and instead of sending packets
120 via physical media writes them to the user space program.
121
122 When a program opens /dev/net/tun, driver creates and registers
123 corresponding net device tunX or tapX. After a program closed above
124 devices, driver will automatically delete tunXX or tapXX device and
125 all routes corresponding to it.
126
127 Please read <file:Documentation/networking/tuntap.txt> for more
128 information.
129
130 To compile this driver as a module, choose M here: the module
131 will be called tun.
132
133 If you don't know what to use this for, you don't need it.
134
Pavel Emelyanove314dbd2007-09-25 16:14:46 -0700135config VETH
Rusty Russell6a9a0252007-11-06 20:35:55 -0800136 tristate "Virtual ethernet pair device"
Pavel Emelyanove314dbd2007-09-25 16:14:46 -0700137 ---help---
Rusty Russell6a9a0252007-11-06 20:35:55 -0800138 This device is a local ethernet tunnel. Devices are created in pairs.
139 When one end receives the packet it appears on its pair and vice
140 versa.
Pavel Emelyanove314dbd2007-09-25 16:14:46 -0700141
Linus Torvalds1da177e2005-04-16 15:20:36 -0700142config NET_SB1000
143 tristate "General Instruments Surfboard 1000"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -0700144 depends on PNP
Linus Torvalds1da177e2005-04-16 15:20:36 -0700145 ---help---
146 This is a driver for the General Instrument (also known as
147 NextLevel) SURFboard 1000 internal
148 cable modem. This is an ISA card which is used by a number of cable
149 TV companies to provide cable modem access. It's a one-way
150 downstream-only cable modem, meaning that your upstream net link is
151 provided by your regular phone modem.
152
153 At present this driver only compiles as a module, so say M here if
154 you have this card. The module will be called sb1000. Then read
155 <file:Documentation/networking/README.sb1000> for information on how
156 to use this module, as it needs special ppp scripts for establishing
157 a connection. Further documentation and the necessary scripts can be
158 found at:
159
160 <http://www.jacksonville.net/~fventuri/>
161 <http://home.adelphia.net/~siglercm/sb1000.html>
162 <http://linuxpower.cx/~cable/>
163
164 If you don't have this card, of course say N.
165
Adrian Bunkf65fd8f2006-01-05 22:45:41 -0800166source "drivers/net/arcnet/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700167
Andy Fleming00db8182005-07-30 19:31:23 -0400168source "drivers/net/phy/Kconfig"
169
Linus Torvalds1da177e2005-04-16 15:20:36 -0700170#
171# Ethernet
172#
173
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700174menuconfig NET_ETHERNET
Linus Torvalds1da177e2005-04-16 15:20:36 -0700175 bool "Ethernet (10 or 100Mbit)"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700176 depends on !UML
Linus Torvalds1da177e2005-04-16 15:20:36 -0700177 ---help---
178 Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
179 type of Local Area Network (LAN) in universities and companies.
180
181 Common varieties of Ethernet are: 10BASE-2 or Thinnet (10 Mbps over
182 coaxial cable, linking computers in a chain), 10BASE-T or twisted
183 pair (10 Mbps over twisted pair cable, linking computers to central
184 hubs), 10BASE-F (10 Mbps over optical fiber links, using hubs),
185 100BASE-TX (100 Mbps over two twisted pair cables, using hubs),
186 100BASE-T4 (100 Mbps over 4 standard voice-grade twisted pair
187 cables, using hubs), 100BASE-FX (100 Mbps over optical fiber links)
188 [the 100BASE varieties are also known as Fast Ethernet], and Gigabit
189 Ethernet (1 Gbps over optical fiber or short copper links).
190
191 If your Linux machine will be connected to an Ethernet and you have
192 an Ethernet network interface card (NIC) installed in your computer,
193 say Y here and read the Ethernet-HOWTO, available from
194 <http://www.tldp.org/docs.html#howto>. You will then also have
195 to say Y to the driver for your particular NIC.
196
197 Note that the answer to this question won't directly affect the
198 kernel: saying N will just cause the configurator to skip all
199 the questions about Ethernet network cards. If unsure, say N.
200
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700201if NET_ETHERNET
202
Linus Torvalds1da177e2005-04-16 15:20:36 -0700203config MII
204 tristate "Generic Media Independent Interface device support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700205 help
206 Most ethernet controllers have MII transceiver either as an external
207 or internal device. It is safe to say Y or M here even if your
208 ethernet card lack MII.
209
Haavard Skinnemoen89e57852006-11-09 14:51:17 +0100210config MACB
211 tristate "Atmel MACB support"
sedji gaouaou61352662008-07-10 10:15:35 +0100212 depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9G20 || ARCH_AT91CAP9
frederic RODO6c36a702007-07-12 19:07:24 +0200213 select PHYLIB
Haavard Skinnemoen89e57852006-11-09 14:51:17 +0100214 help
215 The Atmel MACB ethernet interface is found on many AT32 and AT91
216 parts. Say Y to include support for the MACB chip.
217
218 To compile this driver as a module, choose M here: the module
219 will be called macb.
220
Linus Torvalds1da177e2005-04-16 15:20:36 -0700221source "drivers/net/arm/Kconfig"
222
Ben Dooks825a2ff2007-07-03 16:53:09 +0100223config AX88796
224 tristate "ASIX AX88796 NE2000 clone support"
Magnus Damm86879912007-11-08 16:31:05 +0900225 depends on ARM || MIPS || SUPERH
Ben Dooks825a2ff2007-07-03 16:53:09 +0100226 select CRC32
227 select MII
228 help
229 AX88796 driver, using platform bus to provide
230 chip detection and resources
231
Magnus Damm89e536a2007-09-28 22:42:16 -0700232config AX88796_93CX6
233 bool "ASIX AX88796 external 93CX6 eeprom support"
234 depends on AX88796
235 select EEPROM_93CX6
236 help
237 Select this if your platform comes with an external 93CX6 eeprom.
238
Linus Torvalds1da177e2005-04-16 15:20:36 -0700239config MACE
240 tristate "MACE (Power Mac ethernet) support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700241 depends on PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700242 select CRC32
243 help
244 Power Macintoshes and clones with Ethernet built-in on the
245 motherboard will usually use a MACE (Medium Access Control for
246 Ethernet) interface. Say Y to include support for the MACE chip.
247
248 To compile this driver as a module, choose M here: the module
249 will be called mace.
250
251config MACE_AAUI_PORT
252 bool "Use AAUI port instead of TP by default"
253 depends on MACE
254 help
255 Some Apple machines (notably the Apple Network Server) which use the
256 MACE ethernet chip have an Apple AUI port (small 15-pin connector),
257 instead of an 8-pin RJ45 connector for twisted-pair ethernet. Say
258 Y here if you have such a machine. If unsure, say N.
259 The driver will default to AAUI on ANS anyway, and if you use it as
260 a module, you can provide the port_aaui=0|1 to force the driver.
261
262config BMAC
263 tristate "BMAC (G3 ethernet) support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700264 depends on PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700265 select CRC32
266 help
267 Say Y for support of BMAC Ethernet interfaces. These are used on G3
268 computers.
269
270 To compile this driver as a module, choose M here: the module
271 will be called bmac.
272
Linus Torvalds1da177e2005-04-16 15:20:36 -0700273config ARIADNE
274 tristate "Ariadne support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700275 depends on ZORRO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700276 help
277 If you have a Village Tronic Ariadne Ethernet adapter, say Y.
278 Otherwise, say N.
279
280 To compile this driver as a module, choose M here: the module
281 will be called ariadne.
282
283config A2065
284 tristate "A2065 support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700285 depends on ZORRO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700286 select CRC32
287 help
288 If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
289 say N.
290
291 To compile this driver as a module, choose M here: the module
292 will be called a2065.
293
294config HYDRA
295 tristate "Hydra support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700296 depends on ZORRO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700297 select CRC32
298 help
299 If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
300
301 To compile this driver as a module, choose M here: the module
302 will be called hydra.
303
304config ZORRO8390
305 tristate "Zorro NS8390-based Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700306 depends on ZORRO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700307 select CRC32
308 help
309 This driver is for Zorro Ethernet cards using an NS8390-compatible
310 chipset, like the Village Tronic Ariadne II and the Individual
311 Computers X-Surf Ethernet cards. If you have such a card, say Y.
312 Otherwise, say N.
313
314 To compile this driver as a module, choose M here: the module
315 will be called zorro8390.
316
317config APNE
318 tristate "PCMCIA NE2000 support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700319 depends on AMIGA_PCMCIA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700320 select CRC32
321 help
322 If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
323 say N.
324
325 To compile this driver as a module, choose M here: the module
326 will be called apne.
327
Linus Torvalds1da177e2005-04-16 15:20:36 -0700328config MAC8390
329 bool "Macintosh NS 8390 based ethernet cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700330 depends on MAC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700331 select CRC32
332 help
333 If you want to include a driver to support Nubus or LC-PDS
334 Ethernet cards using an NS8390 chipset or its equivalent, say Y
335 and read the Ethernet-HOWTO, available from
336 <http://www.tldp.org/docs.html#howto>.
337
338config MAC89x0
339 tristate "Macintosh CS89x0 based ethernet cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700340 depends on MAC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700341 ---help---
342 Support for CS89x0 chipset based Ethernet cards. If you have a
343 Nubus or LC-PDS network (Ethernet) card of this type, say Y and
344 read the Ethernet-HOWTO, available from
345 <http://www.tldp.org/docs.html#howto>.
346
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800347 To compile this driver as a module, choose M here. This module will
Linus Torvalds1da177e2005-04-16 15:20:36 -0700348 be called mac89x0.
349
350config MACSONIC
351 tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700352 depends on MAC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700353 ---help---
354 Support for NatSemi SONIC based Ethernet devices. This includes
355 the onboard Ethernet in many Quadras as well as some LC-PDS,
356 a few Nubus and all known Comm Slot Ethernet cards. If you have
357 one of these say Y and read the Ethernet-HOWTO, available from
358 <http://www.tldp.org/docs.html#howto>.
359
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800360 To compile this driver as a module, choose M here. This module will
Linus Torvalds1da177e2005-04-16 15:20:36 -0700361 be called macsonic.
362
363config MACMACE
Finn Thain8b6aaab2007-05-01 22:33:01 +0200364 bool "Macintosh (AV) onboard MACE ethernet"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700365 depends on MAC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700366 select CRC32
367 help
368 Support for the onboard AMD 79C940 MACE Ethernet controller used in
369 the 660AV and 840AV Macintosh. If you have one of these Macintoshes
370 say Y and read the Ethernet-HOWTO, available from
371 <http://www.tldp.org/docs.html#howto>.
372
373config MVME147_NET
374 tristate "MVME147 (Lance) Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700375 depends on MVME147
Linus Torvalds1da177e2005-04-16 15:20:36 -0700376 select CRC32
377 help
378 Support for the on-board Ethernet interface on the Motorola MVME147
379 single-board computer. Say Y here to include the
380 driver for this chip in your kernel.
381 To compile this driver as a module, choose M here.
382
383config MVME16x_NET
384 tristate "MVME16x Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700385 depends on MVME16x
Linus Torvalds1da177e2005-04-16 15:20:36 -0700386 help
387 This is the driver for the Ethernet interface on the Motorola
388 MVME162, 166, 167, 172 and 177 boards. Say Y here to include the
389 driver for this chip in your kernel.
390 To compile this driver as a module, choose M here.
391
392config BVME6000_NET
393 tristate "BVME6000 Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700394 depends on BVME6000
Linus Torvalds1da177e2005-04-16 15:20:36 -0700395 help
396 This is the driver for the Ethernet interface on BVME4000 and
397 BVME6000 VME boards. Say Y here to include the driver for this chip
398 in your kernel.
399 To compile this driver as a module, choose M here.
400
401config ATARILANCE
402 tristate "Atari Lance support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700403 depends on ATARI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700404 help
405 Say Y to include support for several Atari Ethernet adapters based
406 on the AMD Lance chipset: RieblCard (with or without battery), or
407 PAMCard VME (also the version by Rhotron, with different addresses).
408
Linus Torvalds1da177e2005-04-16 15:20:36 -0700409config SUN3LANCE
410 tristate "Sun3/Sun3x on-board LANCE support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700411 depends on SUN3 || SUN3X
Linus Torvalds1da177e2005-04-16 15:20:36 -0700412 help
413 Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
414 featured an AMD Lance 10Mbit Ethernet controller on board; say Y
415 here to compile in the Linux driver for this and enable Ethernet.
416 General Linux information on the Sun 3 and 3x series (now
417 discontinued) is at
418 <http://www.angelfire.com/ca2/tech68k/sun3.html>.
419
420 If you're not building a kernel for a Sun 3, say N.
421
422config SUN3_82586
Al Viro9a482202005-08-25 06:24:56 +0100423 bool "Sun3 on-board Intel 82586 support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700424 depends on SUN3
Linus Torvalds1da177e2005-04-16 15:20:36 -0700425 help
426 This driver enables support for the on-board Intel 82586 based
427 Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note
428 that this driver does not support 82586-based adapters on additional
429 VME boards.
430
431config HPLANCE
432 bool "HP on-board LANCE support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700433 depends on DIO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700434 select CRC32
435 help
436 If you want to use the builtin "LANCE" Ethernet controller on an
437 HP300 machine, say Y here.
438
439config LASI_82596
440 tristate "Lasi ethernet"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700441 depends on GSC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700442 help
Matthew Wilcox6de187e2006-11-18 10:05:16 -0700443 Say Y here to support the builtin Intel 82596 ethernet controller
444 found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700445
Thomas Bogendoerferf2ec8032007-06-28 00:49:06 +0200446config SNI_82596
447 tristate "SNI RM ethernet"
448 depends on NET_ETHERNET && SNI_RM
449 help
450 Say Y here to support the on-board Intel 82596 ethernet controller
451 built into SNI RM machines.
452
Florian Fainellief112912008-03-19 17:14:51 +0100453config KORINA
454 tristate "Korina (IDT RC32434) Ethernet support"
Ralf Baechlef57b2062008-04-28 12:48:40 +0100455 depends on NET_ETHERNET && MIKROTIK_RB532
Florian Fainellief112912008-03-19 17:14:51 +0100456 help
457 If you have a Mikrotik RouterBoard 500 or IDT RC32434
458 based system say Y. Otherwise say N.
459
Linus Torvalds1da177e2005-04-16 15:20:36 -0700460config MIPS_JAZZ_SONIC
461 tristate "MIPS JAZZ onboard SONIC Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700462 depends on MACH_JAZZ
Linus Torvalds1da177e2005-04-16 15:20:36 -0700463 help
464 This is the driver for the onboard card of MIPS Magnum 4000,
465 Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
466
Chris Zankel74f2a5f02008-05-05 23:36:35 -0700467config XTENSA_XT2000_SONIC
468 tristate "Xtensa XT2000 onboard SONIC Ethernet support"
469 depends on XTENSA_PLATFORM_XT2000
470 help
471 This is the driver for the onboard card of the Xtensa XT2000 board.
472
Linus Torvalds1da177e2005-04-16 15:20:36 -0700473config MIPS_AU1X00_ENET
474 bool "MIPS AU1000 Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700475 depends on SOC_AU1X00
Herbert Valerio Riedel0638dec2006-06-01 09:41:04 +0200476 select PHYLIB
Linus Torvalds1da177e2005-04-16 15:20:36 -0700477 select CRC32
478 help
479 If you have an Alchemy Semi AU1X00 based system
480 say Y. Otherwise, say N.
481
Linus Torvalds1da177e2005-04-16 15:20:36 -0700482config SGI_IOC3_ETH
483 bool "SGI IOC3 Ethernet"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700484 depends on PCI && SGI_IP27
Linus Torvalds1da177e2005-04-16 15:20:36 -0700485 select CRC32
486 select MII
487 help
488 If you have a network (Ethernet) card of this type, say Y and read
489 the Ethernet-HOWTO, available from
490 <http://www.tldp.org/docs.html#howto>.
491
Ralf Baechledcbf8472005-10-10 14:51:27 +0100492config MIPS_SIM_NET
Ralf Baechle1e2b9802007-03-18 23:21:22 +0000493 tristate "MIPS simulator Network device"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700494 depends on MIPS_SIM
Ralf Baechledcbf8472005-10-10 14:51:27 +0100495 help
496 The MIPSNET device is a simple Ethernet network device which is
497 emulated by the MIPS Simulator.
498 If you are not using a MIPSsim or are unsure, say N.
499
Linus Torvalds1da177e2005-04-16 15:20:36 -0700500config SGI_O2MACE_ETH
501 tristate "SGI O2 MACE Fast Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700502 depends on SGI_IP32=y
Linus Torvalds1da177e2005-04-16 15:20:36 -0700503
504config STNIC
505 tristate "National DP83902AV support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700506 depends on SUPERH
Linus Torvalds1da177e2005-04-16 15:20:36 -0700507 select CRC32
508 help
509 Support for cards based on the National Semiconductor DP83902AV
510 ST-NIC Serial Network Interface Controller for Twisted Pair. This
511 is a 10Mbit/sec Ethernet controller. Product overview and specs at
512 <http://www.national.com/pf/DP/DP83902A.html>.
513
514 If unsure, say N.
515
Nobuhiro Iwamatsu86a74ff2008-06-09 16:33:56 -0700516config SH_ETH
517 tristate "Renesas SuperH Ethernet support"
518 depends on SUPERH && \
Yoshinori Sato71557a32008-08-06 19:49:00 -0400519 (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7763 || \
520 CPU_SUBTYPE_SH7619)
Nobuhiro Iwamatsu86a74ff2008-06-09 16:33:56 -0700521 select CRC32
522 select MII
523 select MDIO_BITBANG
524 select PHYLIB
525 help
526 Renesas SuperH Ethernet device driver.
Yoshinori Sato71557a32008-08-06 19:49:00 -0400527 This driver support SH7710, SH7712, SH7763 and SH7619.
Nobuhiro Iwamatsu86a74ff2008-06-09 16:33:56 -0700528
Linus Torvalds1da177e2005-04-16 15:20:36 -0700529config SUNLANCE
530 tristate "Sun LANCE support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700531 depends on SBUS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700532 select CRC32
533 help
534 This driver supports the "le" interface present on all 32-bit Sparc
535 systems, on some older Ultra systems and as an Sbus option. These
536 cards are based on the AMD Lance chipset, which is better known
537 via the NE2100 cards.
538
539 To compile this driver as a module, choose M here: the module
540 will be called sunlance.
541
542config HAPPYMEAL
543 tristate "Sun Happy Meal 10/100baseT support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700544 depends on SBUS || PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700545 select CRC32
546 help
547 This driver supports the "hme" interface present on most Ultra
548 systems and as an option on older Sbus systems. This driver supports
549 both PCI and Sbus devices. This driver also supports the "qfe" quad
550 100baseT device available in both PCI and Sbus configurations.
551
552 To compile this driver as a module, choose M here: the module
553 will be called sunhme.
554
555config SUNBMAC
556 tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700557 depends on SBUS && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -0700558 select CRC32
559 help
560 This driver supports the "be" interface available as an Sbus option.
561 This is Sun's older 100baseT Ethernet device.
562
563 To compile this driver as a module, choose M here: the module
564 will be called sunbmac.
565
566config SUNQE
567 tristate "Sun QuadEthernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700568 depends on SBUS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700569 select CRC32
570 help
571 This driver supports the "qe" 10baseT Ethernet device, available as
572 an Sbus option. Note that this is not the same as Quad FastEthernet
573 "qfe" which is supported by the Happy Meal driver instead.
574
575 To compile this driver as a module, choose M here: the module
576 will be called sunqe.
577
578config SUNGEM
579 tristate "Sun GEM support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700580 depends on PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700581 select CRC32
582 help
583 Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0. See also
584 <http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>.
585
David S. Miller1f26dac2005-09-27 15:24:13 -0700586config CASSINI
587 tristate "Sun Cassini support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700588 depends on PCI
David S. Miller1f26dac2005-09-27 15:24:13 -0700589 select CRC32
590 help
591 Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also
592 <http://www.sun.com/products-n-solutions/hardware/docs/pdf/817-4341-10.pdf>
593
David S. Miller4c521e42007-07-09 22:23:51 -0700594config SUNVNET
595 tristate "Sun Virtual Network support"
596 depends on SUN_LDOMS
597 help
598 Support for virtual network devices under Sun Logical Domains.
599
Linus Torvalds1da177e2005-04-16 15:20:36 -0700600config NET_VENDOR_3COM
601 bool "3COM cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700602 depends on ISA || EISA || MCA || PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700603 help
604 If you have a network (Ethernet) card belonging to this class, say Y
605 and read the Ethernet-HOWTO, available from
606 <http://www.tldp.org/docs.html#howto>.
607
608 Note that the answer to this question doesn't directly affect the
609 kernel: saying N will just cause the configurator to skip all
610 the questions about 3COM cards. If you say Y, you will be asked for
611 your specific card in the following questions.
612
613config EL1
614 tristate "3c501 \"EtherLink\" support"
615 depends on NET_VENDOR_3COM && ISA
616 ---help---
617 If you have a network (Ethernet) card of this type, say Y and read
618 the Ethernet-HOWTO, available from
619 <http://www.tldp.org/docs.html#howto>. Also, consider buying a
620 new card, since the 3c501 is slow, broken, and obsolete: you will
621 have problems. Some people suggest to ping ("man ping") a nearby
622 machine every minute ("man cron") when using this card.
623
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800624 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700625 will be called 3c501.
626
627config EL2
628 tristate "3c503 \"EtherLink II\" support"
629 depends on NET_VENDOR_3COM && ISA
630 select CRC32
631 help
632 If you have a network (Ethernet) card of this type, say Y and read
633 the Ethernet-HOWTO, available from
634 <http://www.tldp.org/docs.html#howto>.
635
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800636 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700637 will be called 3c503.
638
639config ELPLUS
640 tristate "3c505 \"EtherLink Plus\" support"
Al Viroa5532602005-05-04 05:39:42 +0100641 depends on NET_VENDOR_3COM && ISA && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700642 ---help---
643 Information about this network (Ethernet) card can be found in
644 <file:Documentation/networking/3c505.txt>. If you have a card of
645 this type, say Y and read the Ethernet-HOWTO, available from
646 <http://www.tldp.org/docs.html#howto>.
647
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800648 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700649 will be called 3c505.
650
651config EL16
652 tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)"
653 depends on NET_VENDOR_3COM && ISA && EXPERIMENTAL
654 help
655 If you have a network (Ethernet) card of this type, say Y and read
656 the Ethernet-HOWTO, available from
657 <http://www.tldp.org/docs.html#howto>.
658
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800659 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700660 will be called 3c507.
661
662config EL3
663 tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support"
664 depends on NET_VENDOR_3COM && (ISA || EISA || MCA)
665 ---help---
666 If you have a network (Ethernet) card belonging to the 3Com
667 EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
668 from <http://www.tldp.org/docs.html#howto>.
669
670 If your card is not working you may need to use the DOS
671 setup disk to disable Plug & Play mode, and to select the default
672 media type.
673
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800674 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700675 will be called 3c509.
676
677config 3C515
678 tristate "3c515 ISA \"Fast EtherLink\""
Al Viroa5532602005-05-04 05:39:42 +0100679 depends on NET_VENDOR_3COM && (ISA || EISA) && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700680 help
681 If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
682 network card, say Y and read the Ethernet-HOWTO, available from
683 <http://www.tldp.org/docs.html#howto>.
684
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800685 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700686 will be called 3c515.
687
688config ELMC
689 tristate "3c523 \"EtherLink/MC\" support"
690 depends on NET_VENDOR_3COM && MCA_LEGACY
691 help
692 If you have a network (Ethernet) card of this type, say Y and read
693 the Ethernet-HOWTO, available from
694 <http://www.tldp.org/docs.html#howto>.
695
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800696 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700697 will be called 3c523.
698
699config ELMC_II
700 tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
701 depends on NET_VENDOR_3COM && MCA && MCA_LEGACY
702 help
703 If you have a network (Ethernet) card of this type, say Y and read
704 the Ethernet-HOWTO, available from
705 <http://www.tldp.org/docs.html#howto>.
706
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800707 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700708 will be called 3c527.
709
710config VORTEX
711 tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
712 depends on NET_VENDOR_3COM && (PCI || EISA)
713 select MII
714 ---help---
Jon Mason47c51432006-02-12 11:53:04 -0600715 This option enables driver support for a large number of 10Mbps and
716 10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700717
718 "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
719 "Boomerang" (EtherLink XL 3c900 or 3c905) PCI
720 "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus
721 "Tornado" (3c905) PCI
722 "Hurricane" (3c555/3cSOHO) PCI
723
724 If you have such a card, say Y and read the Ethernet-HOWTO,
725 available from <http://www.tldp.org/docs.html#howto>. More
726 specific information is in
727 <file:Documentation/networking/vortex.txt> and in the comments at
728 the beginning of <file:drivers/net/3c59x.c>.
729
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800730 To compile this support as a module, choose M here.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700731
732config TYPHOON
733 tristate "3cr990 series \"Typhoon\" support"
734 depends on NET_VENDOR_3COM && PCI
735 select CRC32
736 ---help---
737 This option enables driver support for the 3cr990 series of cards:
738
739 3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
740 3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
741 3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
742
743 If you have a network (Ethernet) card of this type, say Y and read
744 the Ethernet-HOWTO, available from
745 <http://www.tldp.org/docs.html#howto>.
746
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800747 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700748 will be called typhoon.
749
750config LANCE
751 tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700752 depends on ISA && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700753 help
754 If you have a network (Ethernet) card of this type, say Y and read
755 the Ethernet-HOWTO, available from
756 <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
757 of this type.
758
759 To compile this driver as a module, choose M here: the module
760 will be called lance. This is recommended.
761
762config NET_VENDOR_SMC
763 bool "Western Digital/SMC cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700764 depends on ISA || MCA || EISA || MAC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700765 help
766 If you have a network (Ethernet) card belonging to this class, say Y
767 and read the Ethernet-HOWTO, available from
768 <http://www.tldp.org/docs.html#howto>.
769
770 Note that the answer to this question doesn't directly affect the
771 kernel: saying N will just cause the configurator to skip all
772 the questions about Western Digital cards. If you say Y, you will be
773 asked for your specific card in the following questions.
774
775config WD80x3
776 tristate "WD80*3 support"
777 depends on NET_VENDOR_SMC && ISA
778 select CRC32
779 help
780 If you have a network (Ethernet) card of this type, say Y and read
781 the Ethernet-HOWTO, available from
782 <http://www.tldp.org/docs.html#howto>.
783
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800784 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700785 will be called wd.
786
787config ULTRAMCA
788 tristate "SMC Ultra MCA support"
789 depends on NET_VENDOR_SMC && MCA
790 select CRC32
791 help
792 If you have a network (Ethernet) card of this type and are running
793 an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
794 available from <http://www.tldp.org/docs.html#howto>.
795
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800796 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700797 will be called smc-mca.
798
799config ULTRA
800 tristate "SMC Ultra support"
801 depends on NET_VENDOR_SMC && ISA
802 select CRC32
803 ---help---
804 If you have a network (Ethernet) card of this type, say Y and read
805 the Ethernet-HOWTO, available from
806 <http://www.tldp.org/docs.html#howto>.
807
808 Important: There have been many reports that, with some motherboards
809 mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
810 such as some BusLogic models) causes corruption problems with many
811 operating systems. The Linux smc-ultra driver has a work-around for
812 this but keep it in mind if you have such a SCSI card and have
813 problems.
814
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800815 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700816 will be called smc-ultra.
817
818config ULTRA32
819 tristate "SMC Ultra32 EISA support"
820 depends on NET_VENDOR_SMC && EISA
821 select CRC32
822 help
823 If you have a network (Ethernet) card of this type, say Y and read
824 the Ethernet-HOWTO, available from
825 <http://www.tldp.org/docs.html#howto>.
826
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800827 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700828 will be called smc-ultra32.
829
Bryan Wue190d6b2007-07-17 14:43:44 +0800830config BFIN_MAC
Mike Frysinger736783b2008-08-27 11:47:57 +0800831 tristate "Blackfin on-chip MAC support"
832 depends on NET_ETHERNET && (BF526 || BF527 || BF536 || BF537)
Bryan Wue190d6b2007-07-17 14:43:44 +0800833 select CRC32
Bryan Wueeb70af2007-09-19 23:37:41 +0800834 select MII
835 select PHYLIB
Bryan Wue190d6b2007-07-17 14:43:44 +0800836 select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
837 help
Mike Frysinger736783b2008-08-27 11:47:57 +0800838 This is the driver for Blackfin on-chip mac device. Say Y if you want it
Bryan Wue190d6b2007-07-17 14:43:44 +0800839 compiled into the kernel. This driver is also available as a module
840 ( = code which can be inserted in and removed from the running kernel
841 whenever you want). The module will be called bfin_mac.
842
843config BFIN_MAC_USE_L1
844 bool "Use L1 memory for rx/tx packets"
Michael Hennerich6893ff12008-01-30 16:52:25 +0800845 depends on BFIN_MAC && (BF527 || BF537)
Bryan Wue190d6b2007-07-17 14:43:44 +0800846 default y
847 help
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200848 To get maximum network performance, you should use L1 memory as rx/tx buffers.
Bryan Wue190d6b2007-07-17 14:43:44 +0800849 Say N here if you want to reserve L1 memory for other uses.
850
851config BFIN_TX_DESC_NUM
852 int "Number of transmit buffer packets"
853 depends on BFIN_MAC
854 range 6 10 if BFIN_MAC_USE_L1
855 range 10 100
856 default "10"
857 help
858 Set the number of buffer packets used in driver.
859
860config BFIN_RX_DESC_NUM
861 int "Number of receive buffer packets"
862 depends on BFIN_MAC
863 range 20 100 if BFIN_MAC_USE_L1
864 range 20 800
865 default "20"
866 help
867 Set the number of buffer packets used in driver.
868
869config BFIN_MAC_RMII
870 bool "RMII PHY Interface (EXPERIMENTAL)"
871 depends on BFIN_MAC && EXPERIMENTAL
Michael Hennerich6893ff12008-01-30 16:52:25 +0800872 default y if BFIN527_EZKIT
873 default n if BFIN537_STAMP
Bryan Wue190d6b2007-07-17 14:43:44 +0800874 help
875 Use Reduced PHY MII Interface
876
Linus Torvalds1da177e2005-04-16 15:20:36 -0700877config SMC9194
878 tristate "SMC 9194 support"
879 depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
880 select CRC32
881 ---help---
882 This is support for the SMC9xxx based Ethernet cards. Choose this
883 option if you have a DELL laptop with the docking station, or
884 another SMC9192/9194 based chipset. Say Y if you want it compiled
885 into the kernel, and read the file
886 <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
887 available from <http://www.tldp.org/docs.html#howto>.
888
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800889 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700890 will be called smc9194.
891
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700892config SMC91X
893 tristate "SMC 91C9x/91C1xxx support"
894 select CRC32
895 select MII
David Howellsb920de12008-02-08 04:19:31 -0800896 depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \
Atsushi Nemotocde0d912008-10-21 00:00:29 +0900897 MIPS || BLACKFIN || MN10300
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700898 help
899 This is a driver for SMC's 91x series of Ethernet chipsets,
900 including the SMC91C94 and the SMC91C111. Say Y if you want it
901 compiled into the kernel, and read the file
902 <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
903 available from <http://www.linuxdoc.org/docs.html#howto>.
904
905 This driver is also available as a module ( = code which can be
906 inserted in and removed from the running kernel whenever you want).
907 The module will be called smc91x. If you want to compile it as a
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800908 module, say M here and read <file:Documentation/kbuild/modules.txt>.
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700909
Sascha Hauer92aa6742006-06-22 07:11:13 +0200910config NET_NETX
911 tristate "NetX Ethernet support"
912 select MII
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700913 depends on ARCH_NETX
Sascha Hauer92aa6742006-06-22 07:11:13 +0200914 help
915 This is support for the Hilscher netX builtin Ethernet ports
916
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800917 To compile this driver as a module, choose M here. The module
Sascha Hauer92aa6742006-06-22 07:11:13 +0200918 will be called netx-eth.
919
Sascha Hauera1365272005-05-05 15:14:15 -0700920config DM9000
921 tristate "DM9000 support"
Alex Landauf40d24d2007-07-12 12:11:48 +0800922 depends on ARM || BLACKFIN || MIPS
Sascha Hauera1365272005-05-05 15:14:15 -0700923 select CRC32
924 select MII
925 ---help---
926 Support for DM9000 chipset.
927
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800928 To compile this driver as a module, choose M here. The module
929 will be called dm9000.
Sascha Hauera1365272005-05-05 15:14:15 -0700930
Ben Dooks485ca222008-06-24 22:16:06 +0100931config DM9000_DEBUGLEVEL
932 int "DM9000 maximum debug level"
933 depends on DM9000
934 default 4
935 help
936 The maximum level of debugging code compiled into the DM9000
937 driver.
938
Ben Dooksf8dd0ec2008-06-24 22:16:04 +0100939config DM9000_FORCE_SIMPLE_PHY_POLL
940 bool "Force simple NSR based PHY polling"
941 depends on DM9000
942 ---help---
943 This configuration forces the DM9000 to use the NSR's LinkStatus
944 bit to determine if the link is up or down instead of the more
945 costly MII PHY reads. Note, this will not work if the chip is
946 operating with an external PHY.
947
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +0100948config ENC28J60
949 tristate "ENC28J60 support"
950 depends on EXPERIMENTAL && SPI && NET_ETHERNET
951 select CRC32
952 ---help---
953 Support for the Microchip EN28J60 ethernet chip.
954
Johann Felix Soden2bfc79d2008-02-05 03:13:58 -0800955 To compile this driver as a module, choose M here. The module will be
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +0100956 called enc28j60.
957
958config ENC28J60_WRITEVERIFY
959 bool "Enable write verify"
960 depends on ENC28J60
961 ---help---
962 Enable the verify after the buffer write useful for debugging purpose.
963 If unsure, say N.
964
Dustin McIntire0a0c72c2006-04-19 20:24:51 -0700965config SMC911X
966 tristate "SMSC LAN911[5678] support"
967 select CRC32
968 select MII
Catalin Marinasbd2c4972008-10-20 18:15:17 +0100969 depends on ARM || SUPERH
Dustin McIntire0a0c72c2006-04-19 20:24:51 -0700970 help
971 This is a driver for SMSC's LAN911x series of Ethernet chipsets
972 including the new LAN9115, LAN9116, LAN9117, and LAN9118.
973 Say Y if you want it compiled into the kernel,
974 and read the Ethernet-HOWTO, available from
975 <http://www.linuxdoc.org/docs.html#howto>.
976
977 This driver is also available as a module. The module will be
978 called smc911x. If you want to compile it as a module, say M
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +0500979 here and read <file:Documentation/kbuild/modules.txt>
Dustin McIntire0a0c72c2006-04-19 20:24:51 -0700980
Linus Torvalds1da177e2005-04-16 15:20:36 -0700981config NET_VENDOR_RACAL
982 bool "Racal-Interlan (Micom) NI cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700983 depends on ISA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700984 help
985 If you have a network (Ethernet) card belonging to this class, such
986 as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
987 available from <http://www.tldp.org/docs.html#howto>.
988
989 Note that the answer to this question doesn't directly affect the
990 kernel: saying N will just cause the configurator to skip all
991 the questions about NI cards. If you say Y, you will be asked for
992 your specific card in the following questions.
993
994config NI5010
995 tristate "NI5010 support (EXPERIMENTAL)"
996 depends on NET_VENDOR_RACAL && ISA && EXPERIMENTAL && BROKEN_ON_SMP
997 ---help---
998 If you have a network (Ethernet) card of this type, say Y and read
999 the Ethernet-HOWTO, available from
1000 <http://www.tldp.org/docs.html#howto>. Note that this is still
1001 experimental code.
1002
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001003 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001004 will be called ni5010.
1005
1006config NI52
1007 tristate "NI5210 support"
1008 depends on NET_VENDOR_RACAL && ISA
1009 help
1010 If you have a network (Ethernet) card of this type, say Y and read
1011 the Ethernet-HOWTO, available from
1012 <http://www.tldp.org/docs.html#howto>.
1013
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001014 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001015 will be called ni52.
1016
1017config NI65
1018 tristate "NI6510 support"
Al Viroa5532602005-05-04 05:39:42 +01001019 depends on NET_VENDOR_RACAL && ISA && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -07001020 help
1021 If you have a network (Ethernet) card of this type, say Y and read
1022 the Ethernet-HOWTO, available from
1023 <http://www.tldp.org/docs.html#howto>.
1024
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001025 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001026 will be called ni65.
1027
1028source "drivers/net/tulip/Kconfig"
1029
1030config AT1700
1031 tristate "AT1700/1720 support (EXPERIMENTAL)"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001032 depends on (ISA || MCA_LEGACY) && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001033 select CRC32
1034 ---help---
1035 If you have a network (Ethernet) card of this type, say Y and read
1036 the Ethernet-HOWTO, available from
1037 <http://www.tldp.org/docs.html#howto>.
1038
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001039 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001040 will be called at1700.
1041
1042config DEPCA
1043 tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001044 depends on ISA || EISA || MCA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001045 select CRC32
1046 ---help---
1047 If you have a network (Ethernet) card of this type, say Y and read
1048 the Ethernet-HOWTO, available from
1049 <http://www.tldp.org/docs.html#howto> as well as
1050 <file:drivers/net/depca.c>.
1051
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001052 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001053 will be called depca.
1054
1055config HP100
1056 tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001057 depends on ISA || EISA || PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001058 help
1059 If you have a network (Ethernet) card of this type, say Y and read
1060 the Ethernet-HOWTO, available from
1061 <http://www.tldp.org/docs.html#howto>.
1062
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001063 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001064 will be called hp100.
1065
1066config NET_ISA
1067 bool "Other ISA cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001068 depends on ISA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001069 ---help---
1070 If your network (Ethernet) card hasn't been mentioned yet and its
1071 bus system (that's the way the cards talks to the other components
1072 of your computer) is ISA (as opposed to EISA, VLB or PCI), say Y.
1073 Make sure you know the name of your card. Read the Ethernet-HOWTO,
1074 available from <http://www.tldp.org/docs.html#howto>.
1075
1076 If unsure, say Y.
1077
1078 Note that the answer to this question doesn't directly affect the
1079 kernel: saying N will just cause the configurator to skip all
1080 the remaining ISA network card questions. If you say Y, you will be
1081 asked for your specific card in the following questions.
1082
1083config E2100
1084 tristate "Cabletron E21xx support"
1085 depends on NET_ISA
1086 select CRC32
1087 help
1088 If you have a network (Ethernet) card of this type, say Y and read
1089 the Ethernet-HOWTO, available from
1090 <http://www.tldp.org/docs.html#howto>.
1091
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001092 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001093 will be called e2100.
1094
1095config EWRK3
1096 tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
1097 depends on NET_ISA
1098 select CRC32
1099 ---help---
1100 This driver supports the DE203, DE204 and DE205 network (Ethernet)
1101 cards. If this is for you, say Y and read
1102 <file:Documentation/networking/ewrk3.txt> in the kernel source as
1103 well as the Ethernet-HOWTO, available from
1104 <http://www.tldp.org/docs.html#howto>.
1105
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001106 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001107 will be called ewrk3.
1108
1109config EEXPRESS
1110 tristate "EtherExpress 16 support"
1111 depends on NET_ISA
1112 ---help---
1113 If you have an EtherExpress16 network (Ethernet) card, say Y and
1114 read the Ethernet-HOWTO, available from
1115 <http://www.tldp.org/docs.html#howto>. Note that the Intel
1116 EtherExpress16 card used to be regarded as a very poor choice
1117 because the driver was very unreliable. We now have a new driver
1118 that should do better.
1119
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001120 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001121 will be called eexpress.
1122
1123config EEXPRESS_PRO
1124 tristate "EtherExpressPro support/EtherExpress 10 (i82595) support"
1125 depends on NET_ISA
1126 ---help---
1127 If you have a network (Ethernet) card of this type, say Y. This
Jon Mason47c51432006-02-12 11:53:04 -06001128 driver supports Intel i82595{FX,TX} based boards. Note however
Linus Torvalds1da177e2005-04-16 15:20:36 -07001129 that the EtherExpress PRO/100 Ethernet card has its own separate
1130 driver. Please read the Ethernet-HOWTO, available from
1131 <http://www.tldp.org/docs.html#howto>.
1132
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001133 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001134 will be called eepro.
1135
Linus Torvalds1da177e2005-04-16 15:20:36 -07001136config HPLAN_PLUS
1137 tristate "HP PCLAN+ (27247B and 27252A) support"
1138 depends on NET_ISA
1139 select CRC32
1140 help
1141 If you have a network (Ethernet) card of this type, say Y and read
1142 the Ethernet-HOWTO, available from
1143 <http://www.tldp.org/docs.html#howto>.
1144
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001145 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001146 will be called hp-plus.
1147
1148config HPLAN
1149 tristate "HP PCLAN (27245 and other 27xxx series) support"
1150 depends on NET_ISA
1151 select CRC32
1152 help
1153 If you have a network (Ethernet) card of this type, say Y and read
1154 the Ethernet-HOWTO, available from
1155 <http://www.tldp.org/docs.html#howto>.
1156
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001157 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001158 will be called hp.
1159
1160config LP486E
1161 tristate "LP486E on board Ethernet"
1162 depends on NET_ISA
1163 help
1164 Say Y here to support the 82596-based on-board Ethernet controller
1165 for the Panther motherboard, which is one of the two shipped in the
1166 Intel Professional Workstation.
1167
1168config ETH16I
1169 tristate "ICL EtherTeam 16i/32 support"
1170 depends on NET_ISA
1171 help
1172 If you have a network (Ethernet) card of this type, say Y and read
1173 the Ethernet-HOWTO, available from
1174 <http://www.tldp.org/docs.html#howto>.
1175
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001176 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001177 will be called eth16i.
1178
1179config NE2000
1180 tristate "NE2000/NE1000 support"
Atsushi Nemotoc7e65c12008-08-08 00:55:17 +09001181 depends on NET_ISA || (Q40 && m) || M32R || MACH_TX49XX
Linus Torvalds1da177e2005-04-16 15:20:36 -07001182 select CRC32
1183 ---help---
1184 If you have a network (Ethernet) card of this type, say Y and read
1185 the Ethernet-HOWTO, available from
1186 <http://www.tldp.org/docs.html#howto>. Many Ethernet cards
1187 without a specific driver are compatible with NE2000.
1188
1189 If you have a PCI NE2000 card however, say N here and Y to "PCI
Jesper Juhl28beaf62006-03-08 00:06:31 -08001190 NE2000 and clone support" under "EISA, VLB, PCI and on board
1191 controllers" below. If you have a NE2000 card and are running on
Linus Torvalds1da177e2005-04-16 15:20:36 -07001192 an MCA system (a bus system used on some IBM PS/2 computers and
1193 laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
1194 below.
1195
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001196 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001197 will be called ne.
1198
1199config ZNET
1200 tristate "Zenith Z-Note support (EXPERIMENTAL)"
Al Viroa5532602005-05-04 05:39:42 +01001201 depends on NET_ISA && EXPERIMENTAL && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -07001202 help
1203 The Zenith Z-Note notebook computer has a built-in network
1204 (Ethernet) card, and this is the Linux driver for it. Note that the
1205 IBM Thinkpad 300 is compatible with the Z-Note and is also supported
1206 by this driver. Read the Ethernet-HOWTO, available from
1207 <http://www.tldp.org/docs.html#howto>.
1208
1209config SEEQ8005
1210 tristate "SEEQ8005 support (EXPERIMENTAL)"
1211 depends on NET_ISA && EXPERIMENTAL
1212 help
1213 This is a driver for the SEEQ 8005 network (Ethernet) card. If this
1214 is for you, read the Ethernet-HOWTO, available from
1215 <http://www.tldp.org/docs.html#howto>.
1216
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001217 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001218 will be called seeq8005.
1219
Linus Torvalds1da177e2005-04-16 15:20:36 -07001220config NE2_MCA
1221 tristate "NE/2 (ne2000 MCA version) support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001222 depends on MCA_LEGACY
Linus Torvalds1da177e2005-04-16 15:20:36 -07001223 select CRC32
1224 help
1225 If you have a network (Ethernet) card of this type, say Y and read
1226 the Ethernet-HOWTO, available from
1227 <http://www.tldp.org/docs.html#howto>.
1228
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001229 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001230 will be called ne2.
1231
1232config IBMLANA
1233 tristate "IBM LAN Adapter/A support"
Adrian Bunke6353f32008-01-30 22:02:35 +02001234 depends on MCA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001235 ---help---
1236 This is a Micro Channel Ethernet adapter. You need to set
1237 CONFIG_MCA to use this driver. It is both available as an in-kernel
1238 driver and as a module.
1239
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001240 To compile this driver as a module, choose M here. The only
Linus Torvalds1da177e2005-04-16 15:20:36 -07001241 currently supported card is the IBM LAN Adapter/A for Ethernet. It
1242 will both support 16K and 32K memory windows, however a 32K window
1243 gives a better security against packet losses. Usage of multiple
1244 boards with this driver should be possible, but has not been tested
1245 up to now due to lack of hardware.
1246
1247config IBMVETH
1248 tristate "IBM LAN Virtual Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001249 depends on PPC_PSERIES
Linus Torvalds1da177e2005-04-16 15:20:36 -07001250 ---help---
1251 This driver supports virtual ethernet adapters on newer IBM iSeries
1252 and pSeries systems.
1253
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001254 To compile this driver as a module, choose M here. The module will
Linus Torvalds1da177e2005-04-16 15:20:36 -07001255 be called ibmveth.
1256
David Gibson1d3bb992007-08-23 13:56:01 +10001257source "drivers/net/ibm_newemac/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001258
1259config NET_PCI
1260 bool "EISA, VLB, PCI and on board controllers"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001261 depends on ISA || EISA || PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001262 help
1263 This is another class of network cards which attach directly to the
1264 bus. If you have one of those, say Y and read the Ethernet-HOWTO,
1265 available from <http://www.tldp.org/docs.html#howto>.
1266
1267 Note that the answer to this question doesn't directly affect the
1268 kernel: saying N will just cause the configurator to skip all
1269 the questions about this class of network cards. If you say Y, you
1270 will be asked for your specific card in the following questions. If
1271 you are unsure, say Y.
1272
1273config PCNET32
1274 tristate "AMD PCnet32 PCI support"
1275 depends on NET_PCI && PCI
1276 select CRC32
1277 select MII
1278 help
1279 If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
1280 answer Y here and read the Ethernet-HOWTO, available from
1281 <http://www.tldp.org/docs.html#howto>.
1282
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001283 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001284 will be called pcnet32.
1285
1286config AMD8111_ETH
1287 tristate "AMD 8111 (new PCI lance) support"
1288 depends on NET_PCI && PCI
1289 select CRC32
1290 select MII
1291 help
1292 If you have an AMD 8111-based PCI lance ethernet card,
1293 answer Y here and read the Ethernet-HOWTO, available from
1294 <http://www.tldp.org/docs.html#howto>.
1295
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001296 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001297 will be called amd8111e.
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001298
Linus Torvalds1da177e2005-04-16 15:20:36 -07001299config ADAPTEC_STARFIRE
1300 tristate "Adaptec Starfire/DuraLAN support"
1301 depends on NET_PCI && PCI
1302 select CRC32
1303 select MII
1304 help
1305 Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
1306 adapter. The DuraLAN chip is used on the 64 bit PCI boards from
1307 Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip
1308 driver.
1309
1310 To compile this driver as a module, choose M here: the module
1311 will be called starfire. This is recommended.
1312
Linus Torvalds1da177e2005-04-16 15:20:36 -07001313config AC3200
1314 tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
1315 depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL
1316 select CRC32
1317 help
1318 If you have a network (Ethernet) card of this type, say Y and read
1319 the Ethernet-HOWTO, available from
1320 <http://www.tldp.org/docs.html#howto>.
1321
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001322 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001323 will be called ac3200.
1324
1325config APRICOT
1326 tristate "Apricot Xen-II on board Ethernet"
1327 depends on NET_PCI && ISA
1328 help
1329 If you have a network (Ethernet) controller of this type, say Y and
1330 read the Ethernet-HOWTO, available from
1331 <http://www.tldp.org/docs.html#howto>.
1332
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001333 To compile this driver as a module, choose M here. The module
1334 will be called apricot.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001335
1336config B44
Michael Buesch753f4922007-09-19 14:20:30 -07001337 tristate "Broadcom 440x/47xx ethernet support"
Al Viro46cb69c2008-05-21 06:32:11 +01001338 depends on SSB_POSSIBLE && HAS_DMA
Michael Buesch753f4922007-09-19 14:20:30 -07001339 select SSB
Linus Torvalds1da177e2005-04-16 15:20:36 -07001340 select MII
1341 help
Michael Buesch753f4922007-09-19 14:20:30 -07001342 If you have a network (Ethernet) controller of this type, say Y
1343 or M and read the Ethernet-HOWTO, available from
Linus Torvalds1da177e2005-04-16 15:20:36 -07001344 <http://www.tldp.org/docs.html#howto>.
1345
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001346 To compile this driver as a module, choose M here. The module
1347 will be called b44.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001348
Michael Buesch753f4922007-09-19 14:20:30 -07001349# Auto-select SSB PCI-HOST support, if possible
1350config B44_PCI_AUTOSELECT
1351 bool
1352 depends on B44 && SSB_PCIHOST_POSSIBLE
1353 select SSB_PCIHOST
1354 default y
1355
1356# Auto-select SSB PCICORE driver, if possible
1357config B44_PCICORE_AUTOSELECT
1358 bool
1359 depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
1360 select SSB_DRIVER_PCICORE
1361 default y
1362
1363config B44_PCI
1364 bool
1365 depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
1366 default y
1367
Linus Torvalds1da177e2005-04-16 15:20:36 -07001368config FORCEDETH
Adrian Bunk82770082006-03-08 00:06:30 -08001369 tristate "nForce Ethernet support"
1370 depends on NET_PCI && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001371 help
1372 If you have a network (Ethernet) controller of this type, say Y and
1373 read the Ethernet-HOWTO, available from
1374 <http://www.tldp.org/docs.html#howto>.
1375
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001376 To compile this driver as a module, choose M here. The module
1377 will be called forcedeth.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001378
Stephen Hemmingere27cdba2006-07-31 20:37:19 -07001379config FORCEDETH_NAPI
Randy Dunlapbf45abe2007-10-18 17:16:20 -07001380 bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
Stephen Hemmingere27cdba2006-07-31 20:37:19 -07001381 depends on FORCEDETH && EXPERIMENTAL
1382 help
1383 NAPI is a new driver API designed to reduce CPU and interrupt load
1384 when the driver is receiving lots of packets from the card. It is
1385 still somewhat experimental and thus not yet enabled by default.
1386
1387 If your estimated Rx load is 10kpps or more, or if the card will be
1388 deployed on potentially unfriendly networks (e.g. in a firewall),
1389 then say Y here.
1390
Stephen Hemmingere27cdba2006-07-31 20:37:19 -07001391 If in doubt, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001392
1393config CS89x0
1394 tristate "CS89x0 support"
Gilles Chanteperdrix0ac4ed92008-09-26 15:44:43 +01001395 depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \
1396 || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001397 ---help---
1398 Support for CS89x0 chipset based Ethernet cards. If you have a
1399 network (Ethernet) card of this type, say Y and read the
1400 Ethernet-HOWTO, available from
1401 <http://www.tldp.org/docs.html#howto> as well as
1402 <file:Documentation/networking/cs89x0.txt>.
1403
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001404 To compile this driver as a module, choose M here. The module
1405 will be called cs89x0.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001406
Gilles Chanteperdrix0ac4ed92008-09-26 15:44:43 +01001407config CS89x0_NONISA_IRQ
1408 def_bool y
1409 depends on CS89x0 != n
1410 depends on MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS
1411
Linus Torvalds1da177e2005-04-16 15:20:36 -07001412config TC35815
1413 tristate "TOSHIBA TC35815 Ethernet support"
Atsushi Nemotoeea221ce2007-03-03 23:54:59 +09001414 depends on NET_PCI && PCI && MIPS
Atsushi Nemotoc6686fe2008-04-12 00:47:46 +09001415 select PHYLIB
Linus Torvalds1da177e2005-04-16 15:20:36 -07001416
Linus Torvalds1da177e2005-04-16 15:20:36 -07001417config EEPRO100
1418 tristate "EtherExpressPro/100 support (eepro100, original Becker driver)"
1419 depends on NET_PCI && PCI
1420 select MII
1421 help
1422 If you have an Intel EtherExpress PRO/100 PCI network (Ethernet)
1423 card, say Y and read the Ethernet-HOWTO, available from
1424 <http://www.tldp.org/docs.html#howto>.
1425
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001426 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001427 will be called eepro100.
1428
1429
1430config E100
1431 tristate "Intel(R) PRO/100+ support"
1432 depends on NET_PCI && PCI
1433 select MII
1434 ---help---
1435 This driver supports Intel(R) PRO/100 family of adapters.
1436 To verify that your adapter is supported, find the board ID number
1437 on the adapter. Look for a label that has a barcode and a number
1438 in the format 123456-001 (six digits hyphen three digits).
1439
1440 Use the above information and the Adapter & Driver ID Guide at:
1441
1442 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
1443
1444 to identify the adapter.
1445
1446 For the latest Intel PRO/100 network driver for Linux, see:
1447
1448 <http://appsr.intel.com/scripts-df/support_intel.asp>
1449
1450 More specific information on configuring the driver is in
1451 <file:Documentation/networking/e100.txt>.
1452
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001453 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001454 will be called e100.
1455
1456config LNE390
1457 tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
1458 depends on NET_PCI && EISA && EXPERIMENTAL
1459 select CRC32
1460 help
1461 If you have a network (Ethernet) card of this type, say Y and read
1462 the Ethernet-HOWTO, available from
1463 <http://www.tldp.org/docs.html#howto>.
1464
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001465 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001466 will be called lne390.
1467
1468config FEALNX
1469 tristate "Myson MTD-8xx PCI Ethernet support"
1470 depends on NET_PCI && PCI
1471 select CRC32
1472 select MII
1473 help
1474 Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
1475 cards. Specifications and data at
1476 <http://www.myson.com.hk/mtd/datasheet/>.
1477
1478config NATSEMI
1479 tristate "National Semiconductor DP8381x series PCI Ethernet support"
1480 depends on NET_PCI && PCI
1481 select CRC32
1482 help
1483 This driver is for the National Semiconductor DP83810 series,
1484 which is used in cards from PureData, NetGear, Linksys
1485 and others, including the 83815 chip.
1486 More specific information and updates are available from
1487 <http://www.scyld.com/network/natsemi.html>.
1488
1489config NE2K_PCI
1490 tristate "PCI NE2000 and clones support (see help)"
1491 depends on NET_PCI && PCI
1492 select CRC32
1493 ---help---
1494 This driver is for NE2000 compatible PCI cards. It will not work
1495 with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
1496 support" below). If you have a PCI NE2000 network (Ethernet) card,
1497 say Y and read the Ethernet-HOWTO, available from
1498 <http://www.tldp.org/docs.html#howto>.
1499
1500 This driver also works for the following NE2000 clone cards:
1501 RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2
1502 NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
1503 Holtek HT80232 Holtek HT80229
1504
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001505 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001506 will be called ne2k-pci.
1507
1508config NE3210
1509 tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
1510 depends on NET_PCI && EISA && EXPERIMENTAL
1511 select CRC32
1512 ---help---
1513 If you have a network (Ethernet) card of this type, say Y and read
1514 the Ethernet-HOWTO, available from
1515 <http://www.tldp.org/docs.html#howto>. Note that this driver
1516 will NOT WORK for NE3200 cards as they are completely different.
1517
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001518 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001519 will be called ne3210.
1520
1521config ES3210
1522 tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
1523 depends on NET_PCI && EISA && EXPERIMENTAL
1524 select CRC32
1525 help
1526 If you have a network (Ethernet) card of this type, say Y and read
1527 the Ethernet-HOWTO, available from
1528 <http://www.tldp.org/docs.html#howto>.
1529
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001530 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001531 will be called es3210.
1532
1533config 8139CP
1534 tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
1535 depends on NET_PCI && PCI && EXPERIMENTAL
1536 select CRC32
1537 select MII
1538 help
1539 This is a driver for the Fast Ethernet PCI network cards based on
1540 the RTL8139C+ chips. If you have one of those, say Y and read
1541 the Ethernet-HOWTO, available from
1542 <http://www.tldp.org/docs.html#howto>.
1543
1544 To compile this driver as a module, choose M here: the module
1545 will be called 8139cp. This is recommended.
1546
1547config 8139TOO
Adrian Bunkf04e3f02005-05-16 21:13:03 +02001548 tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001549 depends on NET_PCI && PCI
1550 select CRC32
1551 select MII
1552 ---help---
1553 This is a driver for the Fast Ethernet PCI network cards based on
Adrian Bunkf04e3f02005-05-16 21:13:03 +02001554 the RTL 8129/8130/8139 chips. If you have one of those, say Y and
1555 read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001556
1557 To compile this driver as a module, choose M here: the module
1558 will be called 8139too. This is recommended.
1559
1560config 8139TOO_PIO
1561 bool "Use PIO instead of MMIO"
1562 default y
1563 depends on 8139TOO
1564 help
1565 This instructs the driver to use programmed I/O ports (PIO) instead
1566 of PCI shared memory (MMIO). This can possibly solve some problems
1567 in case your mainboard has memory consistency issues. If unsure,
1568 say N.
1569
1570config 8139TOO_TUNE_TWISTER
1571 bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
1572 depends on 8139TOO
1573 help
1574 This implements a function which might come in handy in case you
1575 are using low quality on long cabling. It is required for RealTek
1576 RTL-8139 revision K boards, and totally unused otherwise. It tries
1577 to match the transceiver to the cable characteristics. This is
1578 experimental since hardly documented by the manufacturer.
1579 If unsure, say Y.
1580
1581config 8139TOO_8129
1582 bool "Support for older RTL-8129/8130 boards"
1583 depends on 8139TOO
1584 help
1585 This enables support for the older and uncommon RTL-8129 and
1586 RTL-8130 chips, which support MII via an external transceiver,
1587 instead of an internal one. Disabling this option will save some
1588 memory by making the code size smaller. If unsure, say Y.
1589
1590config 8139_OLD_RX_RESET
1591 bool "Use older RX-reset method"
1592 depends on 8139TOO
1593 help
1594 The 8139too driver was recently updated to contain a more rapid
1595 reset sequence, in the face of severe receive errors. This "new"
1596 RX-reset method should be adequate for all boards. But if you
1597 experience problems, you can enable this option to restore the
1598 old RX-reset behavior. If unsure, say N.
1599
Sten Wang7a47dd72007-11-12 21:31:11 -08001600config R6040
1601 tristate "RDC R6040 Fast Ethernet Adapter support (EXPERIMENTAL)"
1602 depends on NET_PCI && PCI
1603 select CRC32
1604 select MII
1605 help
1606 This is a driver for the R6040 Fast Ethernet MACs found in the
1607 the RDC R-321x System-on-chips.
1608
1609 To compile this driver as a module, choose M here: the module
1610 will be called r6040. This is recommended.
1611
Linus Torvalds1da177e2005-04-16 15:20:36 -07001612config SIS900
1613 tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
1614 depends on NET_PCI && PCI
1615 select CRC32
Adrian Bunk6da0f682005-04-30 13:52:49 +02001616 select MII
Linus Torvalds1da177e2005-04-16 15:20:36 -07001617 ---help---
1618 This is a driver for the Fast Ethernet PCI network cards based on
1619 the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
Adrian Bunkc3cf5602006-03-04 17:07:57 +01001620 SiS 630 and SiS 540 chipsets.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001621
1622 This driver also supports AMD 79C901 HomePNA so that you can use
1623 your phone line as a network cable.
1624
1625 To compile this driver as a module, choose M here: the module
1626 will be called sis900. This is recommended.
1627
1628config EPIC100
1629 tristate "SMC EtherPower II"
1630 depends on NET_PCI && PCI
1631 select CRC32
1632 select MII
1633 help
1634 This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
1635 which is based on the SMC83c17x (EPIC/100).
1636 More specific information and updates are available from
1637 <http://www.scyld.com/network/epic100.html>.
1638
1639config SUNDANCE
1640 tristate "Sundance Alta support"
1641 depends on NET_PCI && PCI
1642 select CRC32
1643 select MII
1644 help
1645 This driver is for the Sundance "Alta" chip.
1646 More specific information and updates are available from
1647 <http://www.scyld.com/network/sundance.html>.
1648
1649config SUNDANCE_MMIO
1650 bool "Use MMIO instead of PIO"
1651 depends on SUNDANCE
1652 help
1653 Enable memory-mapped I/O for interaction with Sundance NIC registers.
1654 Do NOT enable this by default, PIO (enabled when MMIO is disabled)
1655 is known to solve bugs on certain chips.
1656
1657 If unsure, say N.
1658
1659config TLAN
1660 tristate "TI ThunderLAN support"
Stephen Hemminger93e16842008-05-30 09:49:55 -07001661 depends on NET_PCI && (PCI || EISA)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001662 ---help---
1663 If you have a PCI Ethernet network card based on the ThunderLAN chip
1664 which is supported by this driver, say Y and read the
1665 Ethernet-HOWTO, available from
1666 <http://www.tldp.org/docs.html#howto>.
1667
1668 Devices currently supported by this driver are Compaq Netelligent,
1669 Compaq NetFlex and Olicom cards. Please read the file
1670 <file:Documentation/networking/tlan.txt> for more details.
1671
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001672 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001673 will be called tlan.
1674
1675 Please email feedback to <torben.mathiasen@compaq.com>.
1676
1677config VIA_RHINE
1678 tristate "VIA Rhine support"
1679 depends on NET_PCI && PCI
1680 select CRC32
1681 select MII
1682 help
1683 If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
1684 Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type
1685 Ethernet functions can also be found integrated on South Bridges
1686 (e.g. VT8235).
1687
1688 To compile this driver as a module, choose M here. The module
1689 will be called via-rhine.
1690
1691config VIA_RHINE_MMIO
1692 bool "Use MMIO instead of PIO"
1693 depends on VIA_RHINE
1694 help
1695 This instructs the driver to use PCI shared memory (MMIO) instead of
1696 programmed I/O ports (PIO). Enabling this gives an improvement in
1697 processing time in parts of the driver.
1698
1699 If unsure, say Y.
1700
Cesar Eduardo Barrosbf345702006-12-19 13:08:47 -08001701config SC92031
1702 tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
1703 depends on NET_PCI && PCI && EXPERIMENTAL
1704 select CRC32
1705 ---help---
1706 This is a driver for the Fast Ethernet PCI network cards based on
1707 the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
1708 have one of these, say Y here.
1709
1710 To compile this driver as a module, choose M here: the module
1711 will be called sc92031. This is recommended.
1712
Matteo Croced95b39c2007-10-14 18:10:13 +02001713config CPMAC
1714 tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
Anton Vorontsov8353ec72008-01-21 23:49:53 +03001715 depends on NET_ETHERNET && EXPERIMENTAL && AR7 && BROKEN
Matteo Croced95b39c2007-10-14 18:10:13 +02001716 select PHYLIB
Matteo Croced95b39c2007-10-14 18:10:13 +02001717 help
1718 TI AR7 CPMAC Ethernet support
1719
Linus Torvalds1da177e2005-04-16 15:20:36 -07001720config NET_POCKET
1721 bool "Pocket and portable adapters"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001722 depends on PARPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001723 ---help---
1724 Cute little network (Ethernet) devices which attach to the parallel
1725 port ("pocket adapters"), commonly used with laptops. If you have
1726 one of those, say Y and read the Ethernet-HOWTO, available from
1727 <http://www.tldp.org/docs.html#howto>.
1728
1729 If you want to plug a network (or some other) card into the PCMCIA
1730 (or PC-card) slot of your laptop instead (PCMCIA is the standard for
1731 credit card size extension cards used by all modern laptops), you
1732 need the pcmcia-cs package (location contained in the file
1733 <file:Documentation/Changes>) and you can say N here.
1734
1735 Laptop users should read the Linux Laptop home page at
1736 <http://www.linux-on-laptops.com/> or
1737 Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>.
1738
1739 Note that the answer to this question doesn't directly affect the
1740 kernel: saying N will just cause the configurator to skip all
1741 the questions about this class of network devices. If you say Y, you
1742 will be asked for your specific device in the following questions.
1743
1744config ATP
1745 tristate "AT-LAN-TEC/RealTek pocket adapter support"
Grant Coady32fa2bf2005-09-10 00:14:05 +10001746 depends on NET_POCKET && PARPORT && X86
Linus Torvalds1da177e2005-04-16 15:20:36 -07001747 select CRC32
1748 ---help---
1749 This is a network (Ethernet) device which attaches to your parallel
1750 port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
1751 available from <http://www.tldp.org/docs.html#howto>, if you
1752 want to use this. If you intend to use this driver, you should have
1753 said N to the "Parallel printer support", because the two drivers
1754 don't like each other.
1755
1756 To compile this driver as a module, choose M here: the module
1757 will be called atp.
1758
1759config DE600
1760 tristate "D-Link DE600 pocket adapter support"
Grant Coady32fa2bf2005-09-10 00:14:05 +10001761 depends on NET_POCKET && PARPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001762 ---help---
1763 This is a network (Ethernet) device which attaches to your parallel
1764 port. Read <file:Documentation/networking/DLINK.txt> as well as the
1765 Ethernet-HOWTO, available from
1766 <http://www.tldp.org/docs.html#howto>, if you want to use
1767 this. It is possible to have several devices share a single parallel
1768 port and it is safe to compile the corresponding drivers into the
1769 kernel.
1770
1771 To compile this driver as a module, choose M here: the module
1772 will be called de600.
1773
1774config DE620
1775 tristate "D-Link DE620 pocket adapter support"
Grant Coady32fa2bf2005-09-10 00:14:05 +10001776 depends on NET_POCKET && PARPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001777 ---help---
1778 This is a network (Ethernet) device which attaches to your parallel
1779 port. Read <file:Documentation/networking/DLINK.txt> as well as the
1780 Ethernet-HOWTO, available from
1781 <http://www.tldp.org/docs.html#howto>, if you want to use
1782 this. It is possible to have several devices share a single parallel
1783 port and it is safe to compile the corresponding drivers into the
1784 kernel.
1785
1786 To compile this driver as a module, choose M here: the module
1787 will be called de620.
1788
1789config SGISEEQ
1790 tristate "SGI Seeq ethernet controller support"
Thomas Bogendoerfer49b11bc2007-12-19 13:42:36 +01001791 depends on SGI_HAS_SEEQ
Linus Torvalds1da177e2005-04-16 15:20:36 -07001792 help
1793 Say Y here if you have an Seeq based Ethernet network card. This is
1794 used in many Silicon Graphics machines.
1795
1796config DECLANCE
1797 tristate "DEC LANCE ethernet controller support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001798 depends on MACH_DECSTATION
Linus Torvalds1da177e2005-04-16 15:20:36 -07001799 select CRC32
1800 help
1801 This driver is for the series of Ethernet controllers produced by
1802 DEC (now Compaq) based on the AMD Lance chipset, including the
1803 DEPCA series. (This chipset is better known via the NE2100 cards.)
1804
1805config 68360_ENET
1806 bool "Motorola 68360 ethernet controller"
1807 depends on M68360
1808 help
1809 Say Y here if you want to use the built-in ethernet controller of
1810 the Motorola 68360 processor.
1811
1812config FEC
Greg Ungerer2af69212005-09-12 11:18:10 +10001813 bool "FEC ethernet controller (of ColdFire CPUs)"
Greg Ungerer892b6252006-01-10 16:58:16 +10001814 depends on M523x || M527x || M5272 || M528x || M520x
Linus Torvalds1da177e2005-04-16 15:20:36 -07001815 help
1816 Say Y here if you want to use the built-in 10/100 Fast ethernet
Greg Ungerer2af69212005-09-12 11:18:10 +10001817 controller on some Motorola ColdFire processors.
1818
1819config FEC2
1820 bool "Second FEC ethernet controller (on some ColdFire CPUs)"
1821 depends on FEC
1822 help
1823 Say Y here if you want to use the second built-in 10/100 Fast
1824 ethernet controller on some Motorola ColdFire processors.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001825
Domen Puncer5d031e92007-10-26 18:07:49 +02001826config FEC_MPC52xx
1827 tristate "MPC52xx FEC driver"
Kumar Gala83dad4c2008-09-22 14:52:19 -07001828 depends on PPC_MPC52xx && PPC_BESTCOMM_FEC
Domen Puncer5d031e92007-10-26 18:07:49 +02001829 select CRC32
1830 select PHYLIB
1831 ---help---
1832 This option enables support for the MPC5200's on-chip
1833 Fast Ethernet Controller
1834 If compiled as module, it will be called 'fec_mpc52xx.ko'.
1835
1836config FEC_MPC52xx_MDIO
1837 bool "MPC52xx FEC MDIO bus driver"
1838 depends on FEC_MPC52xx
1839 default y
1840 ---help---
1841 The MPC5200's FEC can connect to the Ethernet either with
1842 an external MII PHY chip or 10 Mbps 7-wire interface
1843 (Motorola? industry standard).
1844 If your board uses an external PHY connected to FEC, enable this.
1845 If not sure, enable.
1846 If compiled as module, it will be called 'fec_mpc52xx_phy.ko'.
1847
Linus Torvalds1da177e2005-04-16 15:20:36 -07001848config NE_H8300
1849 tristate "NE2000 compatible support for H8/300"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001850 depends on H8300
Linus Torvalds1da177e2005-04-16 15:20:36 -07001851 help
1852 Say Y here if you want to use the NE2000 compatible
1853 controller on the Renesas H8/300 processor.
1854
Chris Snook452c1ce2008-09-14 19:56:10 -05001855config ATL2
1856 tristate "Atheros L2 Fast Ethernet support"
1857 depends on PCI
1858 select CRC32
1859 select MII
1860 help
1861 This driver supports the Atheros L2 fast ethernet adapter.
1862
1863 To compile this driver as a module, choose M here. The module
1864 will be called atl2.
1865
Pantelis Antoniou48257c42005-10-28 16:25:58 -04001866source "drivers/net/fs_enet/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001867
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001868endif # NET_ETHERNET
Linus Torvalds1da177e2005-04-16 15:20:36 -07001869
1870#
1871# Gigabit Ethernet
1872#
1873
Jan Engelhardtf30486d2007-05-10 22:52:56 -07001874menuconfig NETDEV_1000
1875 bool "Ethernet (1000 Mbit)"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07001876 depends on !UML
Jan Engelhardtf30486d2007-05-10 22:52:56 -07001877 default y
Jan Engelhardt06bfb7e2007-08-18 12:56:21 +02001878 ---help---
1879 Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
1880 type of Local Area Network (LAN) in universities and companies.
1881
1882 Say Y here to get to see options for Gigabit Ethernet drivers.
1883 This option alone does not add any kernel code.
1884 Note that drivers supporting both 100 and 1000 MBit may be listed
1885 under "Ethernet (10 or 100MBit)" instead.
1886
1887 If you say N, all options in this submenu will be skipped and disabled.
Jan Engelhardtf30486d2007-05-10 22:52:56 -07001888
1889if NETDEV_1000
Linus Torvalds1da177e2005-04-16 15:20:36 -07001890
1891config ACENIC
1892 tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
1893 depends on PCI
1894 ---help---
1895 Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
1896 GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
1897 adapter. The driver allows for using the Jumbo Frame option (9000
1898 bytes/frame) however it requires that your switches can handle this
1899 as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
1900 line.
1901
1902 To compile this driver as a module, choose M here: the
1903 module will be called acenic.
1904
1905config ACENIC_OMIT_TIGON_I
1906 bool "Omit support for old Tigon I based AceNICs"
1907 depends on ACENIC
1908 help
1909 Say Y here if you only have Tigon II based AceNICs and want to leave
1910 out support for the older Tigon I based cards which are no longer
1911 being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
1912 version)). This will reduce the size of the driver object by
1913 app. 100KB. If you are not sure whether your card is a Tigon I or a
1914 Tigon II, say N here.
1915
1916 The safe and default value for this is N.
1917
1918config DL2K
Komurodf950822007-08-13 09:45:41 +09001919 tristate "DL2000/TC902x-based Gigabit Ethernet support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001920 depends on PCI
1921 select CRC32
1922 help
Komurodf950822007-08-13 09:45:41 +09001923 This driver supports DL2000/TC902x-based Gigabit ethernet cards,
1924 which includes
Linus Torvalds1da177e2005-04-16 15:20:36 -07001925 D-Link DGE-550T Gigabit Ethernet Adapter.
1926 D-Link DL2000-based Gigabit Ethernet Adapter.
Komurodf950822007-08-13 09:45:41 +09001927 Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001928
1929 To compile this driver as a module, choose M here: the
1930 module will be called dl2k.
1931
1932config E1000
1933 tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
1934 depends on PCI
1935 ---help---
1936 This driver supports Intel(R) PRO/1000 gigabit ethernet family of
1937 adapters. For more information on how to identify your adapter, go
1938 to the Adapter & Driver ID Guide at:
1939
1940 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
1941
1942 For general information and support, go to the Intel support
1943 website at:
1944
1945 <http://support.intel.com>
1946
1947 More specific information on configuring the driver is in
1948 <file:Documentation/networking/e1000.txt>.
1949
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001950 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001951 will be called e1000.
1952
Auke Kokbc7f75f2007-09-17 12:30:59 -07001953config E1000E
1954 tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
Al Viro7ac86bf2008-04-27 06:15:42 +01001955 depends on PCI && (!SPARC32 || BROKEN)
Auke Kokbc7f75f2007-09-17 12:30:59 -07001956 ---help---
1957 This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
1958 ethernet family of adapters. For PCI or PCI-X e1000 adapters,
1959 use the regular e1000 driver For more information on how to
1960 identify your adapter, go to the Adapter & Driver ID Guide at:
1961
1962 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
1963
1964 For general information and support, go to the Intel support
1965 website at:
1966
1967 <http://support.intel.com>
1968
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001969 To compile this driver as a module, choose M here. The module
Auke Kokbc7f75f2007-09-17 12:30:59 -07001970 will be called e1000e.
1971
Stephen Hemmingerab7a9832008-01-01 09:27:58 -08001972config IP1000
1973 tristate "IP1000 Gigabit Ethernet support"
1974 depends on PCI && EXPERIMENTAL
1975 select MII
1976 ---help---
1977 This driver supports IP1000 gigabit Ethernet cards.
1978
1979 To compile this driver as a module, choose M here: the module
1980 will be called ipg. This is recommended.
1981
Auke Kok9d5c8242008-01-24 02:22:38 -08001982config IGB
1983 tristate "Intel(R) 82575 PCI-Express Gigabit Ethernet support"
1984 depends on PCI
1985 ---help---
1986 This driver supports Intel(R) 82575 gigabit ethernet family of
1987 adapters. For more information on how to identify your adapter, go
1988 to the Adapter & Driver ID Guide at:
1989
1990 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
1991
1992 For general information and support, go to the Intel support
1993 website at:
1994
1995 <http://support.intel.com>
1996
1997 More specific information on configuring the driver is in
1998 <file:Documentation/networking/e1000.txt>.
1999
Johann Felix Soden2bfc79d2008-02-05 03:13:58 -08002000 To compile this driver as a module, choose M here. The module
Auke Kok9d5c8242008-01-24 02:22:38 -08002001 will be called igb.
2002
Alexander Duyckd3352522008-07-08 15:12:13 -07002003config IGB_LRO
2004 bool "Use software LRO"
2005 depends on IGB && INET
2006 select INET_LRO
2007 ---help---
2008 Say Y here if you want to use large receive offload.
2009
2010 If in doubt, say N.
2011
Jeff Kirsher421e02f2008-10-17 11:08:31 -07002012config IGB_DCA
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002013 bool "Direct Cache Access (DCA) Support"
Jeff Kirsher421e02f2008-10-17 11:08:31 -07002014 default y
2015 depends on IGB && DCA && !(IGB=y && DCA=m)
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002016 ---help---
2017 Say Y here if you want to use Direct Cache Access (DCA) in the
2018 driver. DCA is a method for warming the CPU cache before data
2019 is used, with the intent of lessening the impact of cache misses.
Jeff Kirsher421e02f2008-10-17 11:08:31 -07002020
Lennert Buytenhek15d014d2005-11-11 18:23:13 +01002021source "drivers/net/ixp2000/Kconfig"
2022
Linus Torvalds1da177e2005-04-16 15:20:36 -07002023config MYRI_SBUS
2024 tristate "MyriCOM Gigabit Ethernet support"
2025 depends on SBUS
2026 help
2027 This driver supports MyriCOM Sbus gigabit Ethernet cards.
2028
2029 To compile this driver as a module, choose M here: the module
2030 will be called myri_sbus. This is recommended.
2031
2032config NS83820
Jon Mason47c51432006-02-12 11:53:04 -06002033 tristate "National Semiconductor DP83820 support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07002034 depends on PCI
2035 help
2036 This is a driver for the National Semiconductor DP83820 series
2037 of gigabit ethernet MACs. Cards using this chipset include
2038 the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
2039 SOHO-GA2000T, SOHO-GA2500T. The driver supports the use of
2040 zero copy.
2041
2042config HAMACHI
2043 tristate "Packet Engines Hamachi GNIC-II support"
2044 depends on PCI
2045 select MII
2046 help
2047 If you have a Gigabit Ethernet card of this type, say Y and read
2048 the Ethernet-HOWTO, available from
2049 <http://www.tldp.org/docs.html#howto>.
2050
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002051 To compile this driver as a module, choose M here. The module will be
Linus Torvalds1da177e2005-04-16 15:20:36 -07002052 called hamachi.
2053
2054config YELLOWFIN
2055 tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
2056 depends on PCI && EXPERIMENTAL
2057 select CRC32
2058 ---help---
2059 Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
2060 adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
2061 used by the Beowulf Linux cluster project. See
2062 <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
2063 information about this driver in particular and Beowulf in general.
2064
2065 To compile this driver as a module, choose M here: the module
2066 will be called yellowfin. This is recommended.
2067
2068config R8169
2069 tristate "Realtek 8169 gigabit ethernet support"
2070 depends on PCI
2071 select CRC32
Francois Romieub7372492008-09-13 15:04:38 +02002072 select MII
Linus Torvalds1da177e2005-04-16 15:20:36 -07002073 ---help---
2074 Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
2075
2076 To compile this driver as a module, choose M here: the module
2077 will be called r8169. This is recommended.
2078
Linus Torvalds1da177e2005-04-16 15:20:36 -07002079config R8169_VLAN
2080 bool "VLAN support"
2081 depends on R8169 && VLAN_8021Q
2082 ---help---
2083 Say Y here for the r8169 driver to support the functions required
2084 by the kernel 802.1Q code.
Francois Romieu865c6522008-05-11 14:51:00 +02002085
Linus Torvalds1da177e2005-04-16 15:20:36 -07002086 If in doubt, say Y.
2087
Maciej W. Rozycki1a9e8542007-09-14 12:05:00 +01002088config SB1250_MAC
Maciej W. Rozycki25a72df2007-09-14 11:57:33 +01002089 tristate "SB1250 Gigabit Ethernet support"
2090 depends on SIBYTE_SB1xxx_SOC
Maciej W. Rozyckif5279ff2007-09-21 12:52:10 +01002091 select PHYLIB
Maciej W. Rozycki25a72df2007-09-14 11:57:33 +01002092 ---help---
2093 This driver supports Gigabit Ethernet interfaces based on the
2094 Broadcom SiByte family of System-On-a-Chip parts. They include
2095 the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
2096 and BCM1480 chips.
2097
2098 To compile this driver as a module, choose M here: the module
2099 will be called sb1250-mac.
2100
Francois Romieu890e8d02005-07-30 13:08:43 +02002101config SIS190
Francois Romieue7976372005-09-03 00:57:51 +02002102 tristate "SiS190/SiS191 gigabit ethernet support"
Adrian Bunke9985d52005-08-09 02:41:00 +02002103 depends on PCI
2104 select CRC32
2105 select MII
2106 ---help---
Francois Romieue7976372005-09-03 00:57:51 +02002107 Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
2108 a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
2109 appear in lan on motherboard designs which are based on SiS 965
2110 and SiS 966 south bridge.
Francois Romieu890e8d02005-07-30 13:08:43 +02002111
Adrian Bunke9985d52005-08-09 02:41:00 +02002112 To compile this driver as a module, choose M here: the module
2113 will be called sis190. This is recommended.
Francois Romieu890e8d02005-07-30 13:08:43 +02002114
Stephen Hemmingerbaef58b2005-05-12 20:14:36 -04002115config SKGE
Stephen Hemminger7a160c72006-02-13 15:48:08 -08002116 tristate "New SysKonnect GigaEthernet support"
2117 depends on PCI
Stephen Hemmingerbaef58b2005-05-12 20:14:36 -04002118 select CRC32
2119 ---help---
2120 This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
2121 and related Gigabit Ethernet adapters. It is a new smaller driver
Stephen Hemminger46a60f22005-09-09 12:54:56 -07002122 with better performance and more complete ethtool support.
Stephen Hemmingerbaef58b2005-05-12 20:14:36 -04002123
2124 It does not support the link failover and network management
Stephen Hemminger5ad887f2007-09-15 19:35:14 -04002125 features that "portable" vendor supplied sk98lin driver does.
Stephen Hemmingercd28ab62005-08-16 16:36:49 -07002126
Daniel Drakec6f0d752006-01-21 19:35:34 +00002127 This driver supports adapters based on the original Yukon chipset:
2128 Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
2129 Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
2130
2131 It does not support the newer Yukon2 chipset: a separate driver,
2132 sky2, is provided for Yukon2-based adapters.
2133
2134 To compile this driver as a module, choose M here: the module
2135 will be called skge. This is recommended.
Stephen Hemmingercd28ab62005-08-16 16:36:49 -07002136
Stephen Hemminger678aa1f2007-10-16 12:15:54 -07002137config SKGE_DEBUG
2138 bool "Debugging interface"
2139 depends on SKGE && DEBUG_FS
2140 help
2141 This option adds the ability to dump driver state for debugging.
2142 The file debugfs/skge/ethX displays the state of the internal
2143 transmit and receive rings.
2144
2145 If unsure, say N.
2146
Stephen Hemmingercd28ab62005-08-16 16:36:49 -07002147config SKY2
Stephen Hemminger8a3e3bf2007-07-09 15:33:38 -07002148 tristate "SysKonnect Yukon2 support"
Stephen Hemmingerf479b322006-10-27 10:22:10 -07002149 depends on PCI
Stephen Hemmingercd28ab62005-08-16 16:36:49 -07002150 select CRC32
2151 ---help---
Matt LaPlantecab00892006-10-03 22:36:44 +02002152 This driver supports Gigabit Ethernet adapters based on the
Daniel Drakec6f0d752006-01-21 19:35:34 +00002153 Marvell Yukon 2 chipset:
2154 Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
2155 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
2156
Stephen Hemmingerf479b322006-10-27 10:22:10 -07002157 There is companion driver for the older Marvell Yukon and
2158 Genesis based adapters: skge.
Stephen Hemmingercd28ab62005-08-16 16:36:49 -07002159
2160 To compile this driver as a module, choose M here: the module
2161 will be called sky2. This is recommended.
2162
Stephen Hemminger3cf26752007-07-09 15:33:35 -07002163config SKY2_DEBUG
2164 bool "Debugging interface"
2165 depends on SKY2 && DEBUG_FS
2166 help
2167 This option adds the ability to dump driver state for debugging.
2168 The file debugfs/sky2/ethX displays the state of the internal
2169 transmit and receive rings.
Daniel Drakec6f0d752006-01-21 19:35:34 +00002170
Stephen Hemminger3cf26752007-07-09 15:33:35 -07002171 If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002172
2173config VIA_VELOCITY
2174 tristate "VIA Velocity support"
Yoichi Yuasa73815532007-05-24 16:12:27 +09002175 depends on PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07002176 select CRC32
2177 select CRC_CCITT
2178 select MII
2179 help
2180 If you have a VIA "Velocity" based network card say Y here.
2181
2182 To compile this driver as a module, choose M here. The module
2183 will be called via-velocity.
2184
2185config TIGON3
2186 tristate "Broadcom Tigon3 support"
2187 depends on PCI
Matt Carlson158d7ab2008-05-29 01:37:54 -07002188 select PHYLIB
Linus Torvalds1da177e2005-04-16 15:20:36 -07002189 help
2190 This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
2191
2192 To compile this driver as a module, choose M here: the module
2193 will be called tg3. This is recommended.
2194
Michael Chanb6016b72005-05-26 13:03:09 -07002195config BNX2
2196 tristate "Broadcom NetXtremeII support"
2197 depends on PCI
Michael Chanfba9fe92006-06-12 22:21:25 -07002198 select CRC32
2199 select ZLIB_INFLATE
Michael Chanb6016b72005-05-26 13:03:09 -07002200 help
2201 This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
2202
2203 To compile this driver as a module, choose M here: the module
2204 will be called bnx2. This is recommended.
2205
Jens Osterkampaaec0fa2005-09-05 15:19:29 -07002206config SPIDER_NET
2207 tristate "Spider Gigabit Ethernet driver"
Kou Ishizaki3342cf0e2007-02-20 16:36:14 -06002208 depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
Christoph Hellwig9b158792006-03-15 11:30:44 +01002209 select FW_LOADER
Jens Osterkampaaec0fa2005-09-05 15:19:29 -07002210 help
2211 This driver supports the Gigabit Ethernet chips present on the
2212 Cell Processor-Based Blades from IBM.
2213
Zang Roy-r619115e123b82006-11-08 19:49:13 -08002214config TSI108_ETH
2215 tristate "Tundra TSI108 gigabit Ethernet support"
2216 depends on TSI108_BRIDGE
2217 help
2218 This driver supports Tundra TSI108 gigabit Ethernet ports.
2219 To compile this driver as a module, choose M here: the module
2220 will be called tsi108_eth.
2221
Masakazu Mokuno02c18892007-07-05 20:11:16 +09002222config GELIC_NET
2223 tristate "PS3 Gigabit Ethernet driver"
2224 depends on PPC_PS3
Geoff Levand1d32e212008-04-10 07:01:53 +10002225 select PS3_SYS_MANAGER
Masakazu Mokuno02c18892007-07-05 20:11:16 +09002226 help
2227 This driver supports the network device on the PS3 game
2228 console. This driver has built-in support for Ethernet.
2229
2230 To compile this driver as a module, choose M here: the
2231 module will be called ps3_gelic.
2232
Masakazu Mokuno09dde542008-02-07 19:58:57 +09002233config GELIC_WIRELESS
John W. Linville97ed8392008-03-06 13:08:09 -05002234 bool "PS3 Wireless support"
2235 depends on GELIC_NET
2236 select WIRELESS_EXT
2237 help
2238 This option adds the support for the wireless feature of PS3.
2239 If you have the wireless-less model of PS3 or have no plan to
2240 use wireless feature, disabling this option saves memory. As
2241 the driver automatically distinguishes the models, you can
2242 safely enable this option even if you have a wireless-less model.
Masakazu Mokuno09dde542008-02-07 19:58:57 +09002243
Masakazu Mokunof409e342008-05-30 16:52:55 +09002244config GELIC_WIRELESS_OLD_PSK_INTERFACE
2245 bool "PS3 Wireless private PSK interface (OBSOLETE)"
2246 depends on GELIC_WIRELESS
2247 help
2248 This option retains the obsolete private interface to pass
2249 the PSK from user space programs to the driver. The PSK
2250 stands for 'Pre Shared Key' and is used for WPA[2]-PSK
2251 (WPA-Personal) environment.
2252 If WPA[2]-PSK is used and you need to use old programs that
2253 support only this old interface, say Y. Otherwise N.
2254
2255 If unsure, say N.
2256
Linus Torvalds1da177e2005-04-16 15:20:36 -07002257config GIANFAR
2258 tristate "Gianfar Ethernet"
Kumar Gala3a831562008-01-28 10:24:30 -06002259 depends on FSL_SOC
Andy Flemingbb40dcb2005-09-23 22:54:21 -04002260 select PHYLIB
Dave Jiangbf41a7c2007-04-12 10:57:06 -07002261 select CRC32
Linus Torvalds1da177e2005-04-16 15:20:36 -07002262 help
Jon Loeligeref82a3062006-06-17 17:52:55 -05002263 This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
2264 and MPC86xx family of chips, and the FEC on the 8540.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002265
Li Yangce973b12006-08-14 23:00:11 -07002266config UCC_GETH
Timur Tabi7d776cb2007-03-12 15:40:27 -05002267 tristate "Freescale QE Gigabit Ethernet"
2268 depends on QUICC_ENGINE
Jan Altenberg296baae2007-06-01 00:46:29 -07002269 select PHYLIB
Li Yangce973b12006-08-14 23:00:11 -07002270 help
Timur Tabi7d776cb2007-03-12 15:40:27 -05002271 This driver supports the Gigabit Ethernet mode of the QUICC Engine,
2272 which is available on some Freescale SOCs.
Li Yangce973b12006-08-14 23:00:11 -07002273
Li Yangce973b12006-08-14 23:00:11 -07002274config UGETH_MAGIC_PACKET
2275 bool "Magic Packet detection support"
2276 depends on UCC_GETH
2277
2278config UGETH_FILTERING
2279 bool "Mac address filtering support"
2280 depends on UCC_GETH
2281
Michael Reissd5b90492007-04-13 01:26:19 -05002282config UGETH_TX_ON_DEMAND
2283 bool "Transmit on Demand support"
Li Yangce973b12006-08-14 23:00:11 -07002284 depends on UCC_GETH
2285
Linus Torvalds1da177e2005-04-16 15:20:36 -07002286config MV643XX_ETH
Lennert Buytenhek9c1bbdf2007-10-19 04:11:03 +02002287 tristate "Marvell Discovery (643XX) and Orion ethernet support"
Lennert Buytenhek83aac8a2008-03-27 14:51:40 -04002288 depends on MV64360 || MV64X60 || (PPC_MULTIPLATFORM && PPC32) || PLAT_ORION
Lennert Buytenheked944932008-08-26 13:34:19 +02002289 select PHYLIB
Linus Torvalds1da177e2005-04-16 15:20:36 -07002290 help
Lennert Buytenhek9c1bbdf2007-10-19 04:11:03 +02002291 This driver supports the gigabit ethernet MACs in the
2292 Marvell Discovery PPC/MIPS chipset family (MV643XX) and
2293 in the Marvell Orion ARM SoC family.
2294
2295 Some boards that use the Discovery chipset are the Momenco
2296 Ocelot C and Jaguar ATX and Pegasos II.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002297
Ron Mercer5a4faa872006-07-25 00:40:21 -07002298config QLA3XXX
2299 tristate "QLogic QLA3XXX Network Driver Support"
2300 depends on PCI
2301 help
2302 This driver supports QLogic ISP3XXX gigabit Ethernet cards.
2303
2304 To compile this driver as a module, choose M here: the module
2305 will be called qla3xxx.
2306
Jay Cliburnf3cc28c2007-02-08 10:42:37 -05002307config ATL1
Jay Cliburna6d1f362008-09-27 04:17:22 +00002308 tristate "Atheros/Attansic L1 Gigabit Ethernet support"
2309 depends on PCI
Jay Cliburnf3cc28c2007-02-08 10:42:37 -05002310 select CRC32
2311 select MII
2312 help
Jay Cliburna6d1f362008-09-27 04:17:22 +00002313 This driver supports the Atheros/Attansic L1 gigabit ethernet
2314 adapter.
Jay Cliburnf3cc28c2007-02-08 10:42:37 -05002315
2316 To compile this driver as a module, choose M here. The module
2317 will be called atl1.
2318
Jie Yanga6a53252008-07-18 11:37:13 +08002319config ATL1E
2320 tristate "Atheros L1E Gigabit Ethernet support (EXPERIMENTAL)"
2321 depends on PCI && EXPERIMENTAL
2322 select CRC32
2323 select MII
2324 help
2325 This driver supports the Atheros L1E gigabit ethernet adapter.
2326
2327 To compile this driver as a module, choose M here. The module
2328 will be called atl1e.
2329
Guo-Fu Tseng95252232008-09-16 01:00:11 +08002330config JME
2331 tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
2332 depends on PCI
2333 select CRC32
2334 select MII
2335 ---help---
2336 This driver supports the PCI-Express gigabit ethernet adapters
2337 based on JMicron JMC250 chipset.
2338
2339 To compile this driver as a module, choose M here. The module
2340 will be called jme.
2341
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002342endif # NETDEV_1000
Linus Torvalds1da177e2005-04-16 15:20:36 -07002343
2344#
2345# 10 Gigabit Ethernet
2346#
2347
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002348menuconfig NETDEV_10000
2349 bool "Ethernet (10000 Mbit)"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07002350 depends on !UML
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002351 default y
Jan Engelhardt06bfb7e2007-08-18 12:56:21 +02002352 ---help---
2353 Say Y here to get to see options for 10 Gigabit Ethernet drivers.
2354 This option alone does not add any kernel code.
2355
2356 If you say N, all options in this submenu will be skipped and disabled.
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002357
2358if NETDEV_10000
Linus Torvalds1da177e2005-04-16 15:20:36 -07002359
Christoph Lameter8199d3a2005-03-30 13:34:31 -08002360config CHELSIO_T1
2361 tristate "Chelsio 10Gb Ethernet support"
2362 depends on PCI
Stephen Hemminger57834ca2006-12-01 16:36:19 -08002363 select CRC32
Christoph Lameter8199d3a2005-03-30 13:34:31 -08002364 help
Stephen Hemmingerf1d3d382006-12-01 16:36:16 -08002365 This driver supports Chelsio gigabit and 10-gigabit
2366 Ethernet cards. More information about adapter features and
2367 performance tuning is in <file:Documentation/networking/cxgb.txt>.
Christoph Lameter8199d3a2005-03-30 13:34:31 -08002368
2369 For general information about Chelsio and our products, visit
2370 our website at <http://www.chelsio.com>.
2371
2372 For customer support, please visit our customer support page at
2373 <http://www.chelsio.com/support.htm>.
2374
2375 Please send feedback to <linux-bugs@chelsio.com>.
2376
2377 To compile this driver as a module, choose M here: the module
2378 will be called cxgb.
2379
Stephen Hemminger352c4172006-12-01 16:36:17 -08002380config CHELSIO_T1_1G
2381 bool "Chelsio gigabit Ethernet support"
2382 depends on CHELSIO_T1
2383 help
2384 Enables support for Chelsio's gigabit Ethernet PCI cards. If you
2385 are using only 10G cards say 'N' here.
2386
Divy Le Ray4d22de32007-01-18 22:04:14 -05002387config CHELSIO_T3
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002388 tristate "Chelsio Communications T3 10Gb Ethernet support"
Randy Dunlap9e833be2008-05-30 10:29:19 -07002389 depends on PCI && INET
Divy Le Ray2e283962007-03-18 13:10:06 -07002390 select FW_LOADER
Divy Le Rayb47385b2008-05-21 18:56:26 -07002391 select INET_LRO
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002392 help
2393 This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
2394 adapters.
Divy Le Ray4d22de32007-01-18 22:04:14 -05002395
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002396 For general information about Chelsio and our products, visit
2397 our website at <http://www.chelsio.com>.
Divy Le Ray4d22de32007-01-18 22:04:14 -05002398
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002399 For customer support, please visit our customer support page at
2400 <http://www.chelsio.com/support.htm>.
Divy Le Ray4d22de32007-01-18 22:04:14 -05002401
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002402 Please send feedback to <linux-bugs@chelsio.com>.
Divy Le Ray4d22de32007-01-18 22:04:14 -05002403
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002404 To compile this driver as a module, choose M here: the module
2405 will be called cxgb3.
Divy Le Ray4d22de32007-01-18 22:04:14 -05002406
Jan-Bernd Themann7a291082006-09-13 17:44:31 +02002407config EHEA
2408 tristate "eHEA Ethernet support"
Nathan Lynch60d50192008-06-04 08:31:28 +10002409 depends on IBMEBUS && INET && SPARSEMEM
Jan-Bernd Themannd4dc4ec2007-09-25 16:16:34 -07002410 select INET_LRO
Jan-Bernd Themann7a291082006-09-13 17:44:31 +02002411 ---help---
2412 This driver supports the IBM pSeries eHEA ethernet adapter.
2413
2414 To compile the driver as a module, choose M here. The module
2415 will be called ehea.
2416
Scott Feldman01f2e4e2008-09-15 09:17:11 -07002417config ENIC
Roland Dreiereb8a4cb2008-10-13 18:53:05 -07002418 tristate "Cisco 10G Ethernet NIC support"
Scott Feldman01f2e4e2008-09-15 09:17:11 -07002419 depends on PCI && INET
2420 select INET_LRO
2421 help
2422 This enables the support for the Cisco 10G Ethernet card.
2423
Auke Kok9a799d72007-09-15 14:07:45 -07002424config IXGBE
2425 tristate "Intel(R) 10GbE PCI Express adapters support"
Mallikarjuna R Chilakala177db6f2008-06-18 15:32:19 -07002426 depends on PCI && INET
2427 select INET_LRO
Auke Kok9a799d72007-09-15 14:07:45 -07002428 ---help---
2429 This driver supports Intel(R) 10GbE PCI Express family of
2430 adapters. For more information on how to identify your adapter, go
2431 to the Adapter & Driver ID Guide at:
2432
2433 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
2434
2435 For general information and support, go to the Intel support
2436 website at:
2437
2438 <http://support.intel.com>
2439
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002440 To compile this driver as a module, choose M here. The module
Auke Kok9a799d72007-09-15 14:07:45 -07002441 will be called ixgbe.
2442
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002443config IXGBE_DCA
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002444 bool "Direct Cache Access (DCA) Support"
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002445 default y
2446 depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002447 ---help---
2448 Say Y here if you want to use Direct Cache Access (DCA) in the
2449 driver. DCA is a method for warming the CPU cache before data
2450 is used, with the intent of lessening the impact of cache misses.
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002451
Linus Torvalds1da177e2005-04-16 15:20:36 -07002452config IXGB
2453 tristate "Intel(R) PRO/10GbE support"
2454 depends on PCI
2455 ---help---
Auke Kok9a799d72007-09-15 14:07:45 -07002456 This driver supports Intel(R) PRO/10GbE family of adapters for
2457 PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
2458 instead. For more information on how to identify your adapter, go
Linus Torvalds1da177e2005-04-16 15:20:36 -07002459 to the Adapter & Driver ID Guide at:
2460
2461 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
2462
2463 For general information and support, go to the Intel support
2464 website at:
2465
2466 <http://support.intel.com>
2467
2468 More specific information on configuring the driver is in
2469 <file:Documentation/networking/ixgb.txt>.
2470
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002471 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07002472 will be called ixgb.
2473
Linus Torvalds1da177e2005-04-16 15:20:36 -07002474config S2IO
2475 tristate "S2IO 10Gbe XFrame NIC"
2476 depends on PCI
2477 ---help---
2478 This driver supports the 10Gbe XFrame NIC of S2IO.
Akinobu Mita9eb343a2005-10-21 19:06:42 +09002479 More specific information on configuring the driver is in
2480 <file:Documentation/networking/s2io.txt>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002481
Brice Goglin0da34b62006-05-23 06:10:15 -04002482config MYRI10GE
2483 tristate "Myricom Myri-10G Ethernet support"
Randy Dunlape0d5dab2007-10-18 21:53:50 -07002484 depends on PCI && INET
Brice Goglin0da34b62006-05-23 06:10:15 -04002485 select FW_LOADER
2486 select CRC32
Andrew Gallatin1e6e9342007-09-17 11:37:42 -07002487 select INET_LRO
Brice Goglin0da34b62006-05-23 06:10:15 -04002488 ---help---
2489 This driver supports Myricom Myri-10G Dual Protocol interface in
2490 Ethernet mode. If the eeprom on your board is not recent enough,
2491 you will need a newer firmware image.
2492 You may get this image or more information, at:
2493
Brice Goglind2794902006-09-05 21:58:50 -04002494 <http://www.myri.com/scs/download-Myri10GE.html>
Brice Goglin0da34b62006-05-23 06:10:15 -04002495
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002496 To compile this driver as a module, choose M here. The module
Brice Goglin0da34b62006-05-23 06:10:15 -04002497 will be called myri10ge.
2498
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002499config MYRI10GE_DCA
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002500 bool "Direct Cache Access (DCA) Support"
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002501 default y
2502 depends on MYRI10GE && DCA && !(MYRI10GE=y && DCA=m)
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002503 ---help---
2504 Say Y here if you want to use Direct Cache Access (DCA) in the
2505 driver. DCA is a method for warming the CPU cache before data
2506 is used, with the intent of lessening the impact of cache misses.
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002507
Amit S. Kale3d396eb2006-10-21 15:33:03 -04002508config NETXEN_NIC
2509 tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
Randy Dunlap5ac36612006-11-16 21:39:11 -08002510 depends on PCI
Amit S. Kale3d396eb2006-10-21 15:33:03 -04002511 help
2512 This enables the support for NetXen's Gigabit Ethernet card.
2513
David S. Millera3138df2007-10-09 01:54:01 -07002514config NIU
2515 tristate "Sun Neptune 10Gbit Ethernet support"
2516 depends on PCI
2517 help
2518 This enables support for cards based upon Sun's
2519 Neptune chipset.
2520
Olof Johanssonf5cd7872007-01-31 21:43:54 -06002521config PASEMI_MAC
2522 tristate "PA Semi 1/10Gbit MAC"
Michael Ellerman5beaf7d2008-03-28 12:17:33 +11002523 depends on PPC_PASEMI && PCI
Olof Johanssonbb6e9592007-05-08 00:47:54 -05002524 select PHYLIB
Olof Johansson28ae79f2007-11-28 20:57:27 -06002525 select INET_LRO
Olof Johanssonf5cd7872007-01-31 21:43:54 -06002526 help
2527 This driver supports the on-chip 1/10Gbit Ethernet controller on
2528 PA Semi's PWRficient line of chips.
2529
Yevgeny Petrilinc27a02c2008-10-22 15:47:49 -07002530config MLX4_EN
2531 tristate "Mellanox Technologies 10Gbit Ethernet support"
2532 depends on PCI && INET
2533 select MLX4_CORE
2534 select INET_LRO
2535 help
2536 This driver supports Mellanox Technologies ConnectX Ethernet
2537 devices.
2538
Roland Dreier225c7b12007-05-08 18:00:38 -07002539config MLX4_CORE
2540 tristate
2541 depends on PCI
2542 default n
2543
2544config MLX4_DEBUG
2545 bool "Verbose debugging output" if (MLX4_CORE && EMBEDDED)
Paul Mundtf550d942007-05-10 12:50:28 +09002546 depends on MLX4_CORE
Roland Dreier225c7b12007-05-08 18:00:38 -07002547 default y
2548 ---help---
2549 This option causes debugging code to be compiled into the
2550 mlx4_core driver. The output can be turned on via the
2551 debug_level module parameter (which can also be set after
2552 the driver is loaded through sysfs).
2553
Andy Gospodarek1a348cc2007-09-17 18:50:36 -07002554config TEHUTI
2555 tristate "Tehuti Networks 10G Ethernet"
2556 depends on PCI
2557 help
2558 Tehuti Networks 10G Ethernet NIC
2559
Eliezer Tamira2fbb9e2007-11-15 20:09:02 +02002560config BNX2X
2561 tristate "Broadcom NetXtremeII 10Gb support"
2562 depends on PCI
Lee Schermerhorn07b270e2007-12-13 16:02:59 -08002563 select ZLIB_INFLATE
Eilon Greenstein34f80b02008-06-23 20:33:01 -07002564 select LIBCRC32C
Eliezer Tamira2fbb9e2007-11-15 20:09:02 +02002565 help
2566 This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
2567 To compile this driver as a module, choose M here: the module
2568 will be called bnx2x. This is recommended.
2569
Ron Mercerc4e84bd2008-09-18 11:56:28 -04002570config QLGE
2571 tristate "QLogic QLGE 10Gb Ethernet Driver Support"
2572 depends on PCI
2573 help
2574 This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
2575
2576 To compile this driver as a module, choose M here: the module
2577 will be called qlge.
2578
Ben Hutchings8ceee662008-04-27 12:55:59 +01002579source "drivers/net/sfc/Kconfig"
Eliezer Tamira2fbb9e2007-11-15 20:09:02 +02002580
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002581endif # NETDEV_10000
Linus Torvalds1da177e2005-04-16 15:20:36 -07002582
Linus Torvalds1da177e2005-04-16 15:20:36 -07002583source "drivers/net/tokenring/Kconfig"
2584
2585source "drivers/net/wireless/Kconfig"
2586
Jeff Garzik5b2fc492007-05-09 21:31:55 -04002587source "drivers/net/usb/Kconfig"
2588
Linus Torvalds1da177e2005-04-16 15:20:36 -07002589source "drivers/net/pcmcia/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -07002590
2591source "drivers/net/wan/Kconfig"
2592
2593source "drivers/atm/Kconfig"
2594
2595source "drivers/s390/net/Kconfig"
2596
Jeremy Fitzhardinge0d160212007-07-17 18:37:06 -07002597config XEN_NETDEV_FRONTEND
2598 tristate "Xen network device frontend driver"
2599 depends on XEN
2600 default y
2601 help
2602 The network device frontend driver allows the kernel to
2603 access network devices exported exported by a virtual
2604 machine containing a physical network device driver. The
2605 frontend driver is intended for unprivileged guest domains;
2606 if you are compiling a kernel for a Xen guest, you almost
2607 certainly want to enable this.
2608
Linus Torvalds1da177e2005-04-16 15:20:36 -07002609config ISERIES_VETH
2610 tristate "iSeries Virtual Ethernet driver support"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07002611 depends on PPC_ISERIES
Linus Torvalds1da177e2005-04-16 15:20:36 -07002612
Matt Porterf89efd52005-09-09 12:10:10 -07002613config RIONET
2614 tristate "RapidIO Ethernet over messaging driver support"
Randy Dunlapa81c52a2006-11-01 21:18:58 -08002615 depends on RAPIDIO
Matt Porterf89efd52005-09-09 12:10:10 -07002616
2617config RIONET_TX_SIZE
2618 int "Number of outbound queue entries"
2619 depends on RIONET
2620 default "128"
2621
2622config RIONET_RX_SIZE
2623 int "Number of inbound queue entries"
2624 depends on RIONET
2625 default "128"
2626
Linus Torvalds1da177e2005-04-16 15:20:36 -07002627config FDDI
2628 bool "FDDI driver support"
Maciej W. Rozyckie89a2cf2007-02-05 16:28:27 -08002629 depends on (PCI || EISA || TC)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002630 help
2631 Fiber Distributed Data Interface is a high speed local area network
2632 design; essentially a replacement for high speed Ethernet. FDDI can
2633 run over copper or fiber. If you are connected to such a network and
2634 want a driver for the FDDI card in your computer, say Y here (and
2635 then also Y to the driver for your FDDI card, below). Most people
2636 will say N.
2637
2638config DEFXX
Maciej W. Rozyckie89a2cf2007-02-05 16:28:27 -08002639 tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
2640 depends on FDDI && (PCI || EISA || TC)
2641 ---help---
2642 This is support for the DIGITAL series of TURBOchannel (DEFTA),
2643 EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
2644 to a local FDDI network.
2645
2646 To compile this driver as a module, choose M here: the module
2647 will be called defxx. If unsure, say N.
2648
2649config DEFXX_MMIO
2650 bool
2651 prompt "Use MMIO instead of PIO" if PCI || EISA
2652 depends on DEFXX
2653 default n if PCI || EISA
2654 default y
2655 ---help---
2656 This instructs the driver to use EISA or PCI memory-mapped I/O
2657 (MMIO) as appropriate instead of programmed I/O ports (PIO).
2658 Enabling this gives an improvement in processing time in parts
2659 of the driver, but it may cause problems with EISA (DEFEA)
2660 adapters. TURBOchannel does not have the concept of I/O ports,
2661 so MMIO is always used for these (DEFTA) adapters.
2662
2663 If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002664
2665config SKFP
2666 tristate "SysKonnect FDDI PCI support"
2667 depends on FDDI && PCI
Akinobu Mitabc63eb92006-12-19 13:09:08 -08002668 select BITREVERSE
Linus Torvalds1da177e2005-04-16 15:20:36 -07002669 ---help---
2670 Say Y here if you have a SysKonnect FDDI PCI adapter.
2671 The following adapters are supported by this driver:
2672 - SK-5521 (SK-NET FDDI-UP)
2673 - SK-5522 (SK-NET FDDI-UP DAS)
2674 - SK-5541 (SK-NET FDDI-FP)
2675 - SK-5543 (SK-NET FDDI-LP)
2676 - SK-5544 (SK-NET FDDI-LP DAS)
2677 - SK-5821 (SK-NET FDDI-UP64)
2678 - SK-5822 (SK-NET FDDI-UP64 DAS)
2679 - SK-5841 (SK-NET FDDI-FP64)
2680 - SK-5843 (SK-NET FDDI-LP64)
2681 - SK-5844 (SK-NET FDDI-LP64 DAS)
2682 - Netelligent 100 FDDI DAS Fibre SC
2683 - Netelligent 100 FDDI SAS Fibre SC
2684 - Netelligent 100 FDDI DAS UTP
2685 - Netelligent 100 FDDI SAS UTP
2686 - Netelligent 100 FDDI SAS Fibre MIC
2687
2688 Read <file:Documentation/networking/skfp.txt> for information about
2689 the driver.
2690
2691 Questions concerning this driver can be addressed to:
2692 <linux@syskonnect.de>
2693
2694 To compile this driver as a module, choose M here: the module
2695 will be called skfp. This is recommended.
2696
2697config HIPPI
2698 bool "HIPPI driver support (EXPERIMENTAL)"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07002699 depends on EXPERIMENTAL && INET && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07002700 help
2701 HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
2702 1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
2703 can run over copper (25m) or fiber (300m on multi-mode or 10km on
2704 single-mode). HIPPI networks are commonly used for clusters and to
2705 connect to super computers. If you are connected to a HIPPI network
2706 and have a HIPPI network card in your computer that you want to use
2707 under Linux, say Y here (you must also remember to enable the driver
2708 for your HIPPI card below). Most people will say N here.
2709
2710config ROADRUNNER
2711 tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)"
2712 depends on HIPPI && PCI
2713 help
2714 Say Y here if this is your PCI HIPPI network card.
2715
2716 To compile this driver as a module, choose M here: the module
2717 will be called rrunner. If unsure, say N.
2718
2719config ROADRUNNER_LARGE_RINGS
2720 bool "Use large TX/RX rings (EXPERIMENTAL)"
2721 depends on ROADRUNNER
2722 help
2723 If you say Y here, the RoadRunner driver will preallocate up to 2 MB
2724 of additional memory to allow for fastest operation, both for
2725 transmitting and receiving. This memory cannot be used by any other
2726 kernel code or by user space programs. Say Y here only if you have
2727 the memory.
2728
2729config PLIP
2730 tristate "PLIP (parallel port) support"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07002731 depends on PARPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -07002732 ---help---
2733 PLIP (Parallel Line Internet Protocol) is used to create a
2734 reasonably fast mini network consisting of two (or, rarely, more)
2735 local machines. A PLIP link from a Linux box is a popular means to
2736 install a Linux distribution on a machine which doesn't have a
2737 CD-ROM drive (a minimal system has to be transferred with floppies
2738 first). The kernels on both machines need to have this PLIP option
2739 enabled for this to work.
2740
2741 The PLIP driver has two modes, mode 0 and mode 1. The parallel
2742 ports (the connectors at the computers with 25 holes) are connected
2743 with "null printer" or "Turbo Laplink" cables which can transmit 4
2744 bits at a time (mode 0) or with special PLIP cables, to be used on
2745 bidirectional parallel ports only, which can transmit 8 bits at a
2746 time (mode 1); you can find the wiring of these cables in
2747 <file:Documentation/networking/PLIP.txt>. The cables can be up to
2748 15m long. Mode 0 works also if one of the machines runs DOS/Windows
2749 and has some PLIP software installed, e.g. the Crynwr PLIP packet
2750 driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
2751 and winsock or NCSA's telnet.
2752
2753 If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
2754 as the NET-3-HOWTO, both available from
2755 <http://www.tldp.org/docs.html#howto>. Note that the PLIP
2756 protocol has been changed and this PLIP driver won't work together
2757 with the PLIP support in Linux versions 1.0.x. This option enlarges
2758 your kernel by about 8 KB.
2759
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002760 To compile this driver as a module, choose M here. The module
2761 will be called plip. If unsure, say Y or M, in case you buy
2762 a laptop later.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002763
2764config PPP
2765 tristate "PPP (point-to-point protocol) support"
Ralf Baechleb6e37e52006-07-14 12:15:40 +01002766 select SLHC
Linus Torvalds1da177e2005-04-16 15:20:36 -07002767 ---help---
2768 PPP (Point to Point Protocol) is a newer and better SLIP. It serves
2769 the same purpose: sending Internet traffic over telephone (and other
2770 serial) lines. Ask your access provider if they support it, because
2771 otherwise you can't use it; most Internet access providers these
2772 days support PPP rather than SLIP.
2773
2774 To use PPP, you need an additional program called pppd as described
2775 in the PPP-HOWTO, available at
2776 <http://www.tldp.org/docs.html#howto>. Make sure that you have
2777 the version of pppd recommended in <file:Documentation/Changes>.
2778 The PPP option enlarges your kernel by about 16 KB.
2779
2780 There are actually two versions of PPP: the traditional PPP for
2781 asynchronous lines, such as regular analog phone lines, and
2782 synchronous PPP which can be used over digital ISDN lines for
2783 example. If you want to use PPP over phone lines or other
2784 asynchronous serial lines, you need to say Y (or M) here and also to
2785 the next option, "PPP support for async serial ports". For PPP over
2786 synchronous lines, you should say Y (or M) here and to "Support
2787 synchronous PPP", below.
2788
2789 If you said Y to "Version information on all symbols" above, then
2790 you cannot compile the PPP driver into the kernel; you can then only
2791 compile it as a module. To compile this driver as a module, choose M
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002792 here. The module will be called ppp_generic.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002793
2794config PPP_MULTILINK
2795 bool "PPP multilink support (EXPERIMENTAL)"
2796 depends on PPP && EXPERIMENTAL
2797 help
2798 PPP multilink is a protocol (defined in RFC 1990) which allows you
2799 to combine several (logical or physical) lines into one logical PPP
2800 connection, so that you can utilize your full bandwidth.
2801
2802 This has to be supported at the other end as well and you need a
2803 version of the pppd daemon which understands the multilink protocol.
2804
2805 If unsure, say N.
2806
2807config PPP_FILTER
2808 bool "PPP filtering"
2809 depends on PPP
2810 help
2811 Say Y here if you want to be able to filter the packets passing over
2812 PPP interfaces. This allows you to control which packets count as
2813 activity (i.e. which packets will reset the idle timer or bring up
Jon Mason47c51432006-02-12 11:53:04 -06002814 a demand-dialed link) and which packets are to be dropped entirely.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002815 You need to say Y here if you wish to use the pass-filter and
2816 active-filter options to pppd.
2817
2818 If unsure, say N.
2819
2820config PPP_ASYNC
2821 tristate "PPP support for async serial ports"
2822 depends on PPP
2823 select CRC_CCITT
2824 ---help---
2825 Say Y (or M) here if you want to be able to use PPP over standard
2826 asynchronous serial ports, such as COM1 or COM2 on a PC. If you use
2827 a modem (not a synchronous or ISDN modem) to contact your ISP, you
2828 need this option.
2829
2830 To compile this driver as a module, choose M here.
2831
2832 If unsure, say Y.
2833
2834config PPP_SYNC_TTY
2835 tristate "PPP support for sync tty ports"
2836 depends on PPP
2837 help
2838 Say Y (or M) here if you want to be able to use PPP over synchronous
2839 (HDLC) tty devices, such as the SyncLink adapter. These devices
2840 are often used for high-speed leased lines like T1/E1.
2841
2842 To compile this driver as a module, choose M here.
2843
2844config PPP_DEFLATE
2845 tristate "PPP Deflate compression"
2846 depends on PPP
2847 select ZLIB_INFLATE
2848 select ZLIB_DEFLATE
2849 ---help---
2850 Support for the Deflate compression method for PPP, which uses the
2851 Deflate algorithm (the same algorithm that gzip uses) to compress
2852 each PPP packet before it is sent over the wire. The machine at the
2853 other end of the PPP link (usually your ISP) has to support the
2854 Deflate compression method as well for this to be useful. Even if
2855 they don't support it, it is safe to say Y here.
2856
2857 To compile this driver as a module, choose M here.
2858
2859config PPP_BSDCOMP
2860 tristate "PPP BSD-Compress compression"
2861 depends on PPP
2862 ---help---
2863 Support for the BSD-Compress compression method for PPP, which uses
2864 the LZW compression method to compress each PPP packet before it is
2865 sent over the wire. The machine at the other end of the PPP link
2866 (usually your ISP) has to support the BSD-Compress compression
2867 method as well for this to be useful. Even if they don't support it,
2868 it is safe to say Y here.
2869
2870 The PPP Deflate compression method ("PPP Deflate compression",
2871 above) is preferable to BSD-Compress, because it compresses better
2872 and is patent-free.
2873
2874 Note that the BSD compression code will always be compiled as a
2875 module; it is called bsd_comp and will show up in the directory
2876 modules once you have said "make modules". If unsure, say N.
2877
Matt Domschb3f9b922005-11-08 09:40:47 -08002878config PPP_MPPE
2879 tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)"
2880 depends on PPP && EXPERIMENTAL
2881 select CRYPTO
2882 select CRYPTO_SHA1
2883 select CRYPTO_ARC4
Patrick McHardybcbaecb2006-10-25 16:49:36 +10002884 select CRYPTO_ECB
Matt Domschb3f9b922005-11-08 09:40:47 -08002885 ---help---
2886 Support for the MPPE Encryption protocol, as employed by the
2887 Microsoft Point-to-Point Tunneling Protocol.
2888
2889 See http://pptpclient.sourceforge.net/ for information on
2890 configuring PPTP clients and servers to utilize this method.
2891
Linus Torvalds1da177e2005-04-16 15:20:36 -07002892config PPPOE
2893 tristate "PPP over Ethernet (EXPERIMENTAL)"
2894 depends on EXPERIMENTAL && PPP
2895 help
2896 Support for PPP over Ethernet.
2897
2898 This driver requires the latest version of pppd from the CVS
2899 repository at cvs.samba.org. Alternatively, see the
2900 RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>)
2901 which contains instruction on how to use this driver (under
2902 the heading "Kernel mode PPPoE").
2903
2904config PPPOATM
2905 tristate "PPP over ATM"
2906 depends on ATM && PPP
2907 help
2908 Support PPP (Point to Point Protocol) encapsulated in ATM frames.
2909 This implementation does not yet comply with section 8 of RFC2364,
2910 which can lead to bad results if the ATM peer loses state and
2911 changes its encapsulation unilaterally.
2912
James Chapman3557baa2007-06-27 15:49:24 -07002913config PPPOL2TP
2914 tristate "PPP over L2TP (EXPERIMENTAL)"
James Chapman143cf352007-07-30 18:51:48 -07002915 depends on EXPERIMENTAL && PPP && INET
James Chapman3557baa2007-06-27 15:49:24 -07002916 help
2917 Support for PPP-over-L2TP socket family. L2TP is a protocol
2918 used by ISPs and enterprises to tunnel PPP traffic over UDP
2919 tunnels. L2TP is replacing PPTP for VPN uses.
2920
2921 This kernel component handles only L2TP data packets: a
2922 userland daemon handles L2TP the control protocol (tunnel
2923 and session setup). One such daemon is OpenL2TP
2924 (http://openl2tp.sourceforge.net/).
2925
Linus Torvalds1da177e2005-04-16 15:20:36 -07002926config SLIP
2927 tristate "SLIP (serial line) support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07002928 ---help---
2929 Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
2930 connect to your Internet service provider or to connect to some
2931 other local Unix box or if you want to configure your Linux box as a
2932 Slip/CSlip server for other people to dial in. SLIP (Serial Line
2933 Internet Protocol) is a protocol used to send Internet traffic over
2934 serial connections such as telephone lines or null modem cables;
2935 nowadays, the protocol PPP is more commonly used for this same
2936 purpose.
2937
2938 Normally, your access provider has to support SLIP in order for you
2939 to be able to use it, but there is now a SLIP emulator called SLiRP
2940 around (available from
2941 <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
2942 allows you to use SLIP over a regular dial up shell connection. If
2943 you plan to use SLiRP, make sure to say Y to CSLIP, below. The
2944 NET-3-HOWTO, available from
2945 <http://www.tldp.org/docs.html#howto>, explains how to
2946 configure SLIP. Note that you don't need this option if you just
2947 want to run term (term is a program which gives you almost full
2948 Internet connectivity if you have a regular dial up shell account on
2949 some Internet connected Unix computer. Read
2950 <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
2951 support will enlarge your kernel by about 4 KB. If unsure, say N.
2952
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002953 To compile this driver as a module, choose M here. The module
2954 will be called slip.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002955
2956config SLIP_COMPRESSED
2957 bool "CSLIP compressed headers"
2958 depends on SLIP
Ralf Baechleb6e37e52006-07-14 12:15:40 +01002959 select SLHC
Linus Torvalds1da177e2005-04-16 15:20:36 -07002960 ---help---
2961 This protocol is faster than SLIP because it uses compression on the
2962 TCP/IP headers (not on the data itself), but it has to be supported
2963 on both ends. Ask your access provider if you are not sure and
2964 answer Y, just in case. You will still be able to use plain SLIP. If
2965 you plan to use SLiRP, the SLIP emulator (available from
2966 <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
2967 allows you to use SLIP over a regular dial up shell connection, you
2968 definitely want to say Y here. The NET-3-HOWTO, available from
2969 <http://www.tldp.org/docs.html#howto>, explains how to configure
2970 CSLIP. This won't enlarge your kernel.
2971
Ralf Baechleb6e37e52006-07-14 12:15:40 +01002972config SLHC
2973 tristate
2974 help
2975 This option enables Van Jacobsen serial line header compression
2976 routines.
2977
Linus Torvalds1da177e2005-04-16 15:20:36 -07002978config SLIP_SMART
2979 bool "Keepalive and linefill"
2980 depends on SLIP
2981 help
2982 Adds additional capabilities to the SLIP driver to support the
2983 RELCOM line fill and keepalive monitoring. Ideal on poor quality
2984 analogue lines.
2985
2986config SLIP_MODE_SLIP6
2987 bool "Six bit SLIP encapsulation"
2988 depends on SLIP
2989 help
2990 Just occasionally you may need to run IP over hostile serial
2991 networks that don't pass all control characters or are only seven
2992 bit. Saying Y here adds an extra mode you can use with SLIP:
2993 "slip6". In this mode, SLIP will only send normal ASCII symbols over
2994 the serial device. Naturally, this has to be supported at the other
2995 end of the link as well. It's good enough, for example, to run IP
2996 over the async ports of a Camtec JNT Pad. If unsure, say N.
2997
2998config NET_FC
2999 bool "Fibre Channel driver support"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07003000 depends on SCSI && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07003001 help
3002 Fibre Channel is a high speed serial protocol mainly used to connect
3003 large storage devices to the computer; it is compatible with and
3004 intended to replace SCSI.
3005
3006 If you intend to use Fibre Channel, you need to have a Fibre channel
3007 adaptor card in your computer; say Y here and to the driver for your
3008 adaptor below. You also should have said Y to "SCSI support" and
3009 "SCSI generic support".
3010
Linus Torvalds1da177e2005-04-16 15:20:36 -07003011config NETCONSOLE
3012 tristate "Network console logging support (EXPERIMENTAL)"
Matt Mackall5e43db72005-07-27 15:24:42 -07003013 depends on EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07003014 ---help---
3015 If you want to log kernel messages over the network, enable this.
3016 See <file:Documentation/networking/netconsole.txt> for details.
3017
Satyam Sharma0bcc1812007-08-10 15:35:05 -07003018config NETCONSOLE_DYNAMIC
3019 bool "Dynamic reconfiguration of logging targets (EXPERIMENTAL)"
3020 depends on NETCONSOLE && SYSFS && EXPERIMENTAL
3021 select CONFIGFS_FS
3022 help
3023 This option enables the ability to dynamically reconfigure target
3024 parameters (interface, IP addresses, port numbers, MAC addresses)
3025 at runtime through a userspace interface exported using configfs.
3026 See <file:Documentation/networking/netconsole.txt> for details.
3027
Randy Dunlap54208992005-07-18 13:45:12 -07003028config NETPOLL
3029 def_bool NETCONSOLE
3030
Randy Dunlap54208992005-07-18 13:45:12 -07003031config NETPOLL_TRAP
3032 bool "Netpoll traffic trapping"
3033 default n
3034 depends on NETPOLL
3035
3036config NET_POLL_CONTROLLER
3037 def_bool NETPOLL
3038
Rusty Russell296f96f2007-10-22 11:03:37 +10003039config VIRTIO_NET
3040 tristate "Virtio network driver (EXPERIMENTAL)"
3041 depends on EXPERIMENTAL && VIRTIO
3042 ---help---
Anthony Liguori0ad07ec2007-11-07 20:46:31 -06003043 This is the virtual network driver for virtio. It can be used with
3044 lguest or QEMU based VMMs (like KVM or Xen). Say Y or M.
Rusty Russell296f96f2007-10-22 11:03:37 +10003045
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07003046endif # NETDEVICES