blob: e2068a2621c4ee12302c9d745f5c5aca988dccf7 [file] [log] [blame]
Douglas Gilbert655ee632013-07-02 00:17:34 -04001/*
Linus Torvalds1da177e2005-04-16 15:20:36 -07002 * ASCII values for a number of symbolic constants, printing functions,
3 * etc.
4 * Additions for SCSI 2 and Linux 2.2.x by D. Gilbert (990422)
5 * Additions for SCSI 3+ (SPC-3 T10/1416-D Rev 07 3 May 2002)
6 * by D. Gilbert and aeb (20020609)
Douglas Gilbert655ee632013-07-02 00:17:34 -04007 * Updated to SPC-4 T10/1713-D Rev 36g, D. Gilbert 20130701
Linus Torvalds1da177e2005-04-16 15:20:36 -07008 */
9
Linus Torvalds1da177e2005-04-16 15:20:36 -070010#include <linux/blkdev.h>
11#include <linux/module.h>
12#include <linux/kernel.h>
13
14#include <scsi/scsi.h>
Christoph Hellwigbeb40482006-06-10 18:01:03 +020015#include <scsi/scsi_cmnd.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070016#include <scsi/scsi_device.h>
17#include <scsi/scsi_host.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070018#include <scsi/scsi_eh.h>
Adrian Bunkde540a52005-08-20 21:27:27 +020019#include <scsi/scsi_dbg.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070020
21
22
23/* Commands with service actions that change the command name */
Douglas Gilbert655ee632013-07-02 00:17:34 -040024#define THIRD_PARTY_COPY_OUT 0x83
25#define THIRD_PARTY_COPY_IN 0x84
Linus Torvalds1da177e2005-04-16 15:20:36 -070026
Hannes Reinecke2478a732014-10-24 14:26:56 +020027#define VENDOR_SPECIFIC_CDB 0xc0
Linus Torvalds1da177e2005-04-16 15:20:36 -070028
Hannes Reinecke234d6772014-10-24 14:26:55 +020029struct sa_name_list {
30 int opcode;
31 const struct value_name_pair *arr;
32 int arr_sz;
33};
34
35struct value_name_pair {
36 int value;
37 const char * name;
38};
Linus Torvalds1da177e2005-04-16 15:20:36 -070039
40#ifdef CONFIG_SCSI_CONSTANTS
41static const char * cdb_byte0_names[] = {
42/* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense",
43/* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL,
Justin P. Mattock70f23fd2011-05-10 10:16:21 +020044 "Reassign Blocks",
Douglas Gilberta507c6a2006-07-02 13:48:10 -040045/* 08-0d */ "Read(6)", NULL, "Write(6)", "Seek(6)", NULL, NULL,
Douglas Gilbert655ee632013-07-02 00:17:34 -040046/* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry",
Douglas Gilberta507c6a2006-07-02 13:48:10 -040047/* 13-16 */ "Verify(6)", "Recover Buffered Data", "Mode Select(6)",
48 "Reserve(6)",
49/* 17-1a */ "Release(6)", "Copy", "Erase", "Mode Sense(6)",
Douglas Gilbert655ee632013-07-02 00:17:34 -040050/* 1b-1d */ "Start/Stop Unit", "Receive Diagnostic", "Send Diagnostic",
Linus Torvalds1da177e2005-04-16 15:20:36 -070051/* 1e-1f */ "Prevent/Allow Medium Removal", NULL,
52/* 20-22 */ NULL, NULL, NULL,
53/* 23-28 */ "Read Format Capacities", "Set Window",
Douglas Gilberta507c6a2006-07-02 13:48:10 -040054 "Read Capacity(10)", NULL, NULL, "Read(10)",
55/* 29-2d */ "Read Generation", "Write(10)", "Seek(10)", "Erase(10)",
56 "Read updated block",
57/* 2e-31 */ "Write Verify(10)", "Verify(10)", "Search High", "Search Equal",
Douglas Gilbert655ee632013-07-02 00:17:34 -040058/* 32-34 */ "Search Low", "Set Limits", "Prefetch/Read Position",
Douglas Gilberta507c6a2006-07-02 13:48:10 -040059/* 35-37 */ "Synchronize Cache(10)", "Lock/Unlock Cache(10)",
Douglas Gilbert655ee632013-07-02 00:17:34 -040060 "Read Defect Data(10)",
61/* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer",
62 "Read Buffer",
Douglas Gilberta507c6a2006-07-02 13:48:10 -040063/* 3d-3f */ "Update Block", "Read Long(10)", "Write Long(10)",
64/* 40-41 */ "Change Definition", "Write Same(10)",
Douglas Gilbertb4567ca2009-06-25 15:43:02 -040065/* 42-48 */ "Unmap/Read sub-channel", "Read TOC/PMA/ATIP",
66 "Read density support", "Play audio(10)", "Get configuration",
Douglas Gilbert655ee632013-07-02 00:17:34 -040067 "Play audio msf", "Sanitize/Play audio track/index",
Douglas Gilberta507c6a2006-07-02 13:48:10 -040068/* 49-4f */ "Play track relative(10)", "Get event status notification",
Linus Torvalds1da177e2005-04-16 15:20:36 -070069 "Pause/resume", "Log Select", "Log Sense", "Stop play/scan",
70 NULL,
71/* 50-55 */ "Xdwrite", "Xpwrite, Read disk info", "Xdread, Read track info",
Douglas Gilberta507c6a2006-07-02 13:48:10 -040072 "Reserve track", "Send OPC info", "Mode Select(10)",
73/* 56-5b */ "Reserve(10)", "Release(10)", "Repair track", "Read master cue",
74 "Mode Sense(10)", "Close track/session",
Linus Torvalds1da177e2005-04-16 15:20:36 -070075/* 5c-5f */ "Read buffer capacity", "Send cue sheet", "Persistent reserve in",
76 "Persistent reserve out",
77/* 60-67 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
78/* 68-6f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
79/* 70-77 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
Douglas Gilbertb4567ca2009-06-25 15:43:02 -040080/* 78-7f */ NULL, NULL, NULL, NULL, NULL, NULL, "Extended CDB",
81 "Variable length",
Douglas Gilbert655ee632013-07-02 00:17:34 -040082/* 80-84 */ "Xdwrite(16)", "Rebuild(16)", "Regenerate(16)",
83 "Third party copy out", "Third party copy in",
Douglas Gilberta507c6a2006-07-02 13:48:10 -040084/* 85-89 */ "ATA command pass through(16)", "Access control in",
Douglas Gilbert655ee632013-07-02 00:17:34 -040085 "Access control out", "Read(16)", "Compare and Write",
Douglas Gilbertb4567ca2009-06-25 15:43:02 -040086/* 8a-8f */ "Write(16)", "ORWrite", "Read attributes", "Write attributes",
Douglas Gilberta507c6a2006-07-02 13:48:10 -040087 "Write and verify(16)", "Verify(16)",
88/* 90-94 */ "Pre-fetch(16)", "Synchronize cache(16)",
89 "Lock/unlock cache(16)", "Write same(16)", NULL,
Linus Torvalds1da177e2005-04-16 15:20:36 -070090/* 95-99 */ NULL, NULL, NULL, NULL, NULL,
Douglas Gilbert655ee632013-07-02 00:17:34 -040091/* 9a-9f */ NULL, NULL, NULL, "Service action bidirectional",
92 "Service action in(16)", "Service action out(16)",
Douglas Gilberta507c6a2006-07-02 13:48:10 -040093/* a0-a5 */ "Report luns", "ATA command pass through(12)/Blank",
94 "Security protocol in", "Maintenance in", "Maintenance out",
95 "Move medium/play audio(12)",
Linus Torvalds1da177e2005-04-16 15:20:36 -070096/* a6-a9 */ "Exchange medium", "Move medium attached", "Read(12)",
97 "Play track relative(12)",
98/* aa-ae */ "Write(12)", NULL, "Erase(12), Get Performance",
99 "Read DVD structure", "Write and verify(12)",
100/* af-b1 */ "Verify(12)", "Search data high(12)", "Search data equal(12)",
101/* b2-b4 */ "Search data low(12)", "Set limits(12)",
102 "Read element status attached",
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400103/* b5-b6 */ "Security protocol out", "Send volume tag, set streaming",
Linus Torvalds1da177e2005-04-16 15:20:36 -0700104/* b7-b9 */ "Read defect data(12)", "Read element status", "Read CD msf",
105/* ba-bc */ "Redundancy group (in), Scan",
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400106 "Redundancy group (out), Set cd-rom speed", "Spare (in), Play cd",
107/* bd-bf */ "Spare (out), Mechanism status", "Volume set (in), Read cd",
108 "Volume set (out), Send DVD structure",
Linus Torvalds1da177e2005-04-16 15:20:36 -0700109};
110
Linus Torvalds1da177e2005-04-16 15:20:36 -0700111static const struct value_name_pair maint_in_arr[] = {
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400112 {0x5, "Report identifying information"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700113 {0xa, "Report target port groups"},
114 {0xb, "Report aliases"},
115 {0xc, "Report supported operation codes"},
116 {0xd, "Report supported task management functions"},
117 {0xe, "Report priority"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400118 {0xf, "Report timestamp"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400119 {0x10, "Management protocol in"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700120};
Tobias Klauser6391a112006-06-08 22:23:48 -0700121#define MAINT_IN_SZ ARRAY_SIZE(maint_in_arr)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700122
123static const struct value_name_pair maint_out_arr[] = {
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400124 {0x6, "Set identifying information"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700125 {0xa, "Set target port groups"},
126 {0xb, "Change aliases"},
Douglas Gilbert655ee632013-07-02 00:17:34 -0400127 {0xc, "Remove I_T nexus"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700128 {0xe, "Set priority"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400129 {0xf, "Set timestamp"},
130 {0x10, "Management protocol out"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700131};
Tobias Klauser6391a112006-06-08 22:23:48 -0700132#define MAINT_OUT_SZ ARRAY_SIZE(maint_out_arr)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700133
134static const struct value_name_pair serv_in12_arr[] = {
135 {0x1, "Read media serial number"},
136};
Tobias Klauser6391a112006-06-08 22:23:48 -0700137#define SERV_IN12_SZ ARRAY_SIZE(serv_in12_arr)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700138
139static const struct value_name_pair serv_out12_arr[] = {
140 {-1, "dummy entry"},
141};
Tobias Klauser6391a112006-06-08 22:23:48 -0700142#define SERV_OUT12_SZ ARRAY_SIZE(serv_out12_arr)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700143
Douglas Gilbert655ee632013-07-02 00:17:34 -0400144static const struct value_name_pair serv_bidi_arr[] = {
145 {-1, "dummy entry"},
146};
147#define SERV_BIDI_SZ ARRAY_SIZE(serv_bidi_arr)
148
Linus Torvalds1da177e2005-04-16 15:20:36 -0700149static const struct value_name_pair serv_in16_arr[] = {
150 {0x10, "Read capacity(16)"},
151 {0x11, "Read long(16)"},
Martin K. Petersenf57e4502009-10-15 14:43:23 -0400152 {0x12, "Get LBA status"},
Douglas Gilbert655ee632013-07-02 00:17:34 -0400153 {0x13, "Report referrals"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700154};
Tobias Klauser6391a112006-06-08 22:23:48 -0700155#define SERV_IN16_SZ ARRAY_SIZE(serv_in16_arr)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700156
157static const struct value_name_pair serv_out16_arr[] = {
158 {0x11, "Write long(16)"},
159 {0x1f, "Notify data transfer device(16)"},
160};
Tobias Klauser6391a112006-06-08 22:23:48 -0700161#define SERV_OUT16_SZ ARRAY_SIZE(serv_out16_arr)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700162
Douglas Gilbert655ee632013-07-02 00:17:34 -0400163static const struct value_name_pair pr_in_arr[] = {
164 {0x0, "Persistent reserve in, read keys"},
165 {0x1, "Persistent reserve in, read reservation"},
166 {0x2, "Persistent reserve in, report capabilities"},
167 {0x3, "Persistent reserve in, read full status"},
168};
169#define PR_IN_SZ ARRAY_SIZE(pr_in_arr)
170
171static const struct value_name_pair pr_out_arr[] = {
172 {0x0, "Persistent reserve out, register"},
173 {0x1, "Persistent reserve out, reserve"},
174 {0x2, "Persistent reserve out, release"},
175 {0x3, "Persistent reserve out, clear"},
176 {0x4, "Persistent reserve out, preempt"},
177 {0x5, "Persistent reserve out, preempt and abort"},
178 {0x6, "Persistent reserve out, register and ignore existing key"},
179 {0x7, "Persistent reserve out, register and move"},
180};
181#define PR_OUT_SZ ARRAY_SIZE(pr_out_arr)
182
183/* SPC-4 rev 34 renamed the Extended Copy opcode to Third Party Copy Out.
184 LID1 (List Identifier length: 1 byte) is the Extended Copy found in SPC-2
185 and SPC-3 */
186static const struct value_name_pair tpc_out_arr[] = {
187 {0x0, "Extended copy(LID1)"},
188 {0x1, "Extended copy(LID4)"},
189 {0x10, "Populate token"},
190 {0x11, "Write using token"},
191 {0x1c, "Copy operation abort"},
192};
193#define TPC_OUT_SZ ARRAY_SIZE(tpc_out_arr)
194
195static const struct value_name_pair tpc_in_arr[] = {
196 {0x0, "Receive copy status(LID1)"},
197 {0x1, "Receive copy data(LID1)"},
198 {0x3, "Receive copy operating parameters"},
199 {0x4, "Receive copy failure details(LID1)"},
200 {0x5, "Receive copy status(LID4)"},
201 {0x6, "Receive copy data(LID4)"},
202 {0x7, "Receive ROD token information"},
203 {0x8, "Report all ROD tokens"},
204};
205#define TPC_IN_SZ ARRAY_SIZE(tpc_in_arr)
206
207
Linus Torvalds1da177e2005-04-16 15:20:36 -0700208static const struct value_name_pair variable_length_arr[] = {
209 {0x1, "Rebuild(32)"},
210 {0x2, "Regenerate(32)"},
211 {0x3, "Xdread(32)"},
212 {0x4, "Xdwrite(32)"},
213 {0x5, "Xdwrite extended(32)"},
214 {0x6, "Xpwrite(32)"},
215 {0x7, "Xdwriteread(32)"},
216 {0x8, "Xdwrite extended(64)"},
217 {0x9, "Read(32)"},
218 {0xa, "Verify(32)"},
219 {0xb, "Write(32)"},
220 {0xc, "Write an verify(32)"},
221 {0xd, "Write same(32)"},
222 {0x8801, "Format OSD"},
223 {0x8802, "Create (osd)"},
224 {0x8803, "List (osd)"},
225 {0x8805, "Read (osd)"},
226 {0x8806, "Write (osd)"},
227 {0x8807, "Append (osd)"},
228 {0x8808, "Flush (osd)"},
229 {0x880a, "Remove (osd)"},
230 {0x880b, "Create partition (osd)"},
231 {0x880c, "Remove partition (osd)"},
232 {0x880e, "Get attributes (osd)"},
233 {0x880f, "Set attributes (osd)"},
234 {0x8812, "Create and write (osd)"},
235 {0x8815, "Create collection (osd)"},
236 {0x8816, "Remove collection (osd)"},
237 {0x8817, "List collection (osd)"},
238 {0x8818, "Set key (osd)"},
239 {0x8819, "Set master key (osd)"},
240 {0x881a, "Flush collection (osd)"},
241 {0x881b, "Flush partition (osd)"},
242 {0x881c, "Flush OSD"},
243 {0x8f7e, "Perform SCSI command (osd)"},
244 {0x8f7f, "Perform task management function (osd)"},
245};
Tobias Klauser6391a112006-06-08 22:23:48 -0700246#define VARIABLE_LENGTH_SZ ARRAY_SIZE(variable_length_arr)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700247
Hannes Reinecke6033f972014-10-24 14:26:54 +0200248static struct sa_name_list sa_names_arr[] = {
249 {VARIABLE_LENGTH_CMD, variable_length_arr, VARIABLE_LENGTH_SZ},
250 {MAINTENANCE_IN, maint_in_arr, MAINT_IN_SZ},
251 {MAINTENANCE_OUT, maint_out_arr, MAINT_OUT_SZ},
252 {PERSISTENT_RESERVE_IN, pr_in_arr, PR_IN_SZ},
253 {PERSISTENT_RESERVE_OUT, pr_out_arr, PR_OUT_SZ},
254 {SERVICE_ACTION_IN_12, serv_in12_arr, SERV_IN12_SZ},
255 {SERVICE_ACTION_OUT_12, serv_out12_arr, SERV_OUT12_SZ},
256 {SERVICE_ACTION_BIDIRECTIONAL, serv_bidi_arr, SERV_BIDI_SZ},
257 {SERVICE_ACTION_IN_16, serv_in16_arr, SERV_IN16_SZ},
258 {SERVICE_ACTION_OUT_16, serv_out16_arr, SERV_OUT16_SZ},
259 {THIRD_PARTY_COPY_IN, tpc_in_arr, TPC_IN_SZ},
260 {THIRD_PARTY_COPY_OUT, tpc_out_arr, TPC_OUT_SZ},
261 {0, NULL, 0},
262};
263
Hannes Reinecke234d6772014-10-24 14:26:55 +0200264#else /* ifndef CONFIG_SCSI_CONSTANTS */
Hannes Reinecke2478a732014-10-24 14:26:56 +0200265static const char *cdb_byte0_names[0];
Hannes Reinecke234d6772014-10-24 14:26:55 +0200266
267static struct sa_name_list sa_names_arr[] = {
268 {VARIABLE_LENGTH_CMD, NULL, 0},
269 {MAINTENANCE_IN, NULL, 0},
270 {MAINTENANCE_OUT, NULL, 0},
271 {PERSISTENT_RESERVE_IN, NULL, 0},
272 {PERSISTENT_RESERVE_OUT, NULL, 0},
273 {SERVICE_ACTION_IN_12, NULL, 0},
274 {SERVICE_ACTION_OUT_12, NULL, 0},
275 {SERVICE_ACTION_BIDIRECTIONAL, NULL, 0},
276 {SERVICE_ACTION_IN_16, NULL, 0},
277 {SERVICE_ACTION_OUT_16, NULL, 0},
278 {THIRD_PARTY_COPY_IN, NULL, 0},
279 {THIRD_PARTY_COPY_OUT, NULL, 0},
280 {0, NULL, 0},
281};
282#endif /* CONFIG_SCSI_CONSTANTS */
283
Hannes Reinecke6033f972014-10-24 14:26:54 +0200284static bool scsi_opcode_sa_name(int opcode, int service_action,
Hannes Reinecke2478a732014-10-24 14:26:56 +0200285 const char **cdb_name, const char **sa_name)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700286{
Hannes Reinecke6033f972014-10-24 14:26:54 +0200287 struct sa_name_list *sa_name_ptr;
288 const struct value_name_pair *arr = NULL;
289 int arr_sz, k;
290
Hannes Reinecke2478a732014-10-24 14:26:56 +0200291 *cdb_name = NULL;
292 if (opcode >= VENDOR_SPECIFIC_CDB)
293 return false;
294
295 if (opcode < ARRAY_SIZE(cdb_byte0_names))
296 *cdb_name = cdb_byte0_names[opcode];
297
Hannes Reinecke6033f972014-10-24 14:26:54 +0200298 for (sa_name_ptr = sa_names_arr; sa_name_ptr->arr; ++sa_name_ptr) {
299 if (sa_name_ptr->opcode == opcode) {
300 arr = sa_name_ptr->arr;
301 arr_sz = sa_name_ptr->arr_sz;
302 break;
303 }
304 }
305 if (!arr)
306 return false;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700307
308 for (k = 0; k < arr_sz; ++k, ++arr) {
309 if (service_action == arr->value)
310 break;
311 }
Hannes Reinecke6033f972014-10-24 14:26:54 +0200312 if (k < arr_sz)
313 *sa_name = arr->name;
314
315 return true;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700316}
317
Hannes Reineckea9a47bf2014-10-24 14:26:57 +0200318static void print_opcode_name(const unsigned char *cdbp, size_t cdb_len)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700319{
Hannes Reineckea9a47bf2014-10-24 14:26:57 +0200320 int sa, cdb0;
Hannes Reinecke2478a732014-10-24 14:26:56 +0200321 const char *cdb_name = NULL, *sa_name = NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700322
323 cdb0 = cdbp[0];
Hannes Reinecke6033f972014-10-24 14:26:54 +0200324 if (cdb0 == VARIABLE_LENGTH_CMD) {
Hannes Reineckea9a47bf2014-10-24 14:26:57 +0200325 if (cdb_len < 10) {
326 printk("short variable length command, len=%zu",
327 cdb_len);
Hannes Reinecke6033f972014-10-24 14:26:54 +0200328 return;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700329 }
330 sa = (cdbp[8] << 8) + cdbp[9];
Hannes Reineckea9a47bf2014-10-24 14:26:57 +0200331 } else
Hannes Reinecke6033f972014-10-24 14:26:54 +0200332 sa = cdbp[1] & 0x1f;
Martin K. Petersen8475f682010-01-20 02:17:40 -0500333
Hannes Reinecke2478a732014-10-24 14:26:56 +0200334 if (!scsi_opcode_sa_name(cdb0, sa, &cdb_name, &sa_name)) {
335 if (cdb_name)
336 printk("%s", cdb_name);
337 else if (cdb0 >= VENDOR_SPECIFIC_CDB)
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500338 printk("cdb[0]=0x%x (vendor)", cdb0);
Hannes Reinecke2478a732014-10-24 14:26:56 +0200339 else if (cdb0 >= 0x60 && cdb0 < 0x7e)
340 printk("cdb[0]=0x%x (reserved)", cdb0);
341 else
342 printk("cdb[0]=0x%x", cdb0);
Hannes Reinecke6033f972014-10-24 14:26:54 +0200343 } else {
Hannes Reinecke2478a732014-10-24 14:26:56 +0200344 if (sa_name)
345 printk("%s", sa_name);
346 else if (cdb_name)
347 printk("%s, sa=0x%x", cdb_name, sa);
Douglas Gilbert655ee632013-07-02 00:17:34 -0400348 else
349 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
350 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700351}
352
Hannes Reineckea9a47bf2014-10-24 14:26:57 +0200353void __scsi_print_command(const unsigned char *cdb, size_t cdb_len)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700354{
355 int k, len;
356
Hannes Reineckea9a47bf2014-10-24 14:26:57 +0200357 print_opcode_name(cdb, cdb_len);
Boaz Harroshdb4742d2008-04-30 11:27:26 +0300358 len = scsi_command_size(cdb);
Hannes Reineckea9a47bf2014-10-24 14:26:57 +0200359 if (cdb_len < len)
360 len = cdb_len;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700361 /* print out all bytes in cdb */
Douglas Gilbert655ee632013-07-02 00:17:34 -0400362 for (k = 0; k < len; ++k)
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500363 printk(" %02x", cdb[k]);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700364 printk("\n");
365}
366EXPORT_SYMBOL(__scsi_print_command);
367
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500368void scsi_print_command(struct scsi_cmnd *cmd)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700369{
370 int k;
371
Martin K. Petersen77c9cfc2010-01-20 02:20:43 -0500372 if (cmd->cmnd == NULL)
373 return;
374
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500375 scmd_printk(KERN_INFO, cmd, "CDB: ");
376 print_opcode_name(cmd->cmnd, cmd->cmd_len);
377
Linus Torvalds1da177e2005-04-16 15:20:36 -0700378 /* print out all bytes in cdb */
379 printk(":");
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500380 for (k = 0; k < cmd->cmd_len; ++k)
381 printk(" %02x", cmd->cmnd[k]);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700382 printk("\n");
383}
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500384EXPORT_SYMBOL(scsi_print_command);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700385
Linus Torvalds1da177e2005-04-16 15:20:36 -0700386#ifdef CONFIG_SCSI_CONSTANTS
387
388struct error_info {
389 unsigned short code12; /* 0x0302 looks better than 0x03,0x02 */
390 const char * text;
391};
392
Martin K. Petersen62d42a62007-02-28 12:37:06 -0500393/*
394 * The canonical list of T10 Additional Sense Codes is available at:
Douglas Gilbert655ee632013-07-02 00:17:34 -0400395 * http://www.t10.org/lists/asc-num.txt [most recent: 20130605]
Martin K. Petersen62d42a62007-02-28 12:37:06 -0500396 */
Douglas Gilbert655ee632013-07-02 00:17:34 -0400397
Martin K. Petersen62d42a62007-02-28 12:37:06 -0500398static const struct error_info additional[] =
Linus Torvalds1da177e2005-04-16 15:20:36 -0700399{
400 {0x0000, "No additional sense information"},
401 {0x0001, "Filemark detected"},
402 {0x0002, "End-of-partition/medium detected"},
403 {0x0003, "Setmark detected"},
404 {0x0004, "Beginning-of-partition/medium detected"},
405 {0x0005, "End-of-data detected"},
406 {0x0006, "I/O process terminated"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400407 {0x0007, "Programmable early warning detected"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700408 {0x0011, "Audio play operation in progress"},
409 {0x0012, "Audio play operation paused"},
410 {0x0013, "Audio play operation successfully completed"},
411 {0x0014, "Audio play operation stopped due to error"},
412 {0x0015, "No current audio status to return"},
413 {0x0016, "Operation in progress"},
414 {0x0017, "Cleaning requested"},
415 {0x0018, "Erase operation in progress"},
416 {0x0019, "Locate operation in progress"},
417 {0x001A, "Rewind operation in progress"},
418 {0x001B, "Set capacity operation in progress"},
419 {0x001C, "Verify operation in progress"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400420 {0x001D, "ATA pass through information available"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400421 {0x001E, "Conflicting SA creation request"},
Douglas Gilbert655ee632013-07-02 00:17:34 -0400422 {0x001F, "Logical unit transitioning to another power condition"},
423 {0x0020, "Extended copy information available"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700424
425 {0x0100, "No index/sector signal"},
426
427 {0x0200, "No seek complete"},
428
429 {0x0300, "Peripheral device write fault"},
430 {0x0301, "No write current"},
431 {0x0302, "Excessive write errors"},
432
433 {0x0400, "Logical unit not ready, cause not reportable"},
434 {0x0401, "Logical unit is in process of becoming ready"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400435 {0x0402, "Logical unit not ready, initializing command required"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700436 {0x0403, "Logical unit not ready, manual intervention required"},
437 {0x0404, "Logical unit not ready, format in progress"},
438 {0x0405, "Logical unit not ready, rebuild in progress"},
439 {0x0406, "Logical unit not ready, recalculation in progress"},
440 {0x0407, "Logical unit not ready, operation in progress"},
441 {0x0408, "Logical unit not ready, long write in progress"},
442 {0x0409, "Logical unit not ready, self-test in progress"},
443 {0x040A, "Logical unit not accessible, asymmetric access state "
444 "transition"},
445 {0x040B, "Logical unit not accessible, target port in standby state"},
446 {0x040C, "Logical unit not accessible, target port in unavailable "
447 "state"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400448 {0x040D, "Logical unit not ready, structure check required"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700449 {0x0410, "Logical unit not ready, auxiliary memory not accessible"},
450 {0x0411, "Logical unit not ready, notify (enable spinup) required"},
451 {0x0412, "Logical unit not ready, offline"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400452 {0x0413, "Logical unit not ready, SA creation in progress"},
453 {0x0414, "Logical unit not ready, space allocation in progress"},
Douglas Gilbert655ee632013-07-02 00:17:34 -0400454 {0x0415, "Logical unit not ready, robotics disabled"},
455 {0x0416, "Logical unit not ready, configuration required"},
456 {0x0417, "Logical unit not ready, calibration required"},
457 {0x0418, "Logical unit not ready, a door is open"},
458 {0x0419, "Logical unit not ready, operating in sequential mode"},
459 {0x041A, "Logical unit not ready, start stop unit command in "
460 "progress"},
461 {0x041B, "Logical unit not ready, sanitize in progress"},
462 {0x041C, "Logical unit not ready, additional power use not yet "
463 "granted"},
464 {0x041D, "Logical unit not ready, configuration in progress"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700465
466 {0x0500, "Logical unit does not respond to selection"},
467
468 {0x0600, "No reference position found"},
469
470 {0x0700, "Multiple peripheral devices selected"},
471
472 {0x0800, "Logical unit communication failure"},
473 {0x0801, "Logical unit communication time-out"},
474 {0x0802, "Logical unit communication parity error"},
475 {0x0803, "Logical unit communication CRC error (Ultra-DMA/32)"},
476 {0x0804, "Unreachable copy target"},
477
478 {0x0900, "Track following error"},
479 {0x0901, "Tracking servo failure"},
480 {0x0902, "Focus servo failure"},
481 {0x0903, "Spindle servo failure"},
482 {0x0904, "Head select fault"},
483
484 {0x0A00, "Error log overflow"},
485
486 {0x0B00, "Warning"},
487 {0x0B01, "Warning - specified temperature exceeded"},
488 {0x0B02, "Warning - enclosure degraded"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400489 {0x0B03, "Warning - background self-test failed"},
490 {0x0B04, "Warning - background pre-scan detected medium error"},
491 {0x0B05, "Warning - background medium scan detected medium error"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400492 {0x0B06, "Warning - non-volatile cache now volatile"},
493 {0x0B07, "Warning - degraded power to non-volatile cache"},
494 {0x0B08, "Warning - power loss expected"},
Douglas Gilbert655ee632013-07-02 00:17:34 -0400495 {0x0B09, "Warning - device statistics notification active"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700496
497 {0x0C00, "Write error"},
498 {0x0C01, "Write error - recovered with auto reallocation"},
499 {0x0C02, "Write error - auto reallocation failed"},
500 {0x0C03, "Write error - recommend reassignment"},
501 {0x0C04, "Compression check miscompare error"},
502 {0x0C05, "Data expansion occurred during compression"},
503 {0x0C06, "Block not compressible"},
504 {0x0C07, "Write error - recovery needed"},
505 {0x0C08, "Write error - recovery failed"},
506 {0x0C09, "Write error - loss of streaming"},
507 {0x0C0A, "Write error - padding blocks added"},
508 {0x0C0B, "Auxiliary memory write error"},
509 {0x0C0C, "Write error - unexpected unsolicited data"},
510 {0x0C0D, "Write error - not enough unsolicited data"},
Douglas Gilbert655ee632013-07-02 00:17:34 -0400511 {0x0C0E, "Multiple write errors"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400512 {0x0C0F, "Defects in error window"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700513
514 {0x0D00, "Error detected by third party temporary initiator"},
515 {0x0D01, "Third party device failure"},
516 {0x0D02, "Copy target device not reachable"},
517 {0x0D03, "Incorrect copy target device type"},
518 {0x0D04, "Copy target device data underrun"},
519 {0x0D05, "Copy target device data overrun"},
520
521 {0x0E00, "Invalid information unit"},
522 {0x0E01, "Information unit too short"},
523 {0x0E02, "Information unit too long"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400524 {0x0E03, "Invalid field in command information unit"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700525
526 {0x1000, "Id CRC or ECC error"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400527 {0x1001, "Logical block guard check failed"},
528 {0x1002, "Logical block application tag check failed"},
529 {0x1003, "Logical block reference tag check failed"},
Douglas Gilbert655ee632013-07-02 00:17:34 -0400530 {0x1004, "Logical block protection error on recover buffered data"},
531 {0x1005, "Logical block protection method error"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700532
533 {0x1100, "Unrecovered read error"},
534 {0x1101, "Read retries exhausted"},
535 {0x1102, "Error too long to correct"},
536 {0x1103, "Multiple read errors"},
537 {0x1104, "Unrecovered read error - auto reallocate failed"},
538 {0x1105, "L-EC uncorrectable error"},
539 {0x1106, "CIRC unrecovered error"},
540 {0x1107, "Data re-synchronization error"},
541 {0x1108, "Incomplete block read"},
542 {0x1109, "No gap found"},
543 {0x110A, "Miscorrected error"},
544 {0x110B, "Unrecovered read error - recommend reassignment"},
545 {0x110C, "Unrecovered read error - recommend rewrite the data"},
546 {0x110D, "De-compression CRC error"},
547 {0x110E, "Cannot decompress using declared algorithm"},
548 {0x110F, "Error reading UPC/EAN number"},
549 {0x1110, "Error reading ISRC number"},
550 {0x1111, "Read error - loss of streaming"},
551 {0x1112, "Auxiliary memory read error"},
552 {0x1113, "Read error - failed retransmission request"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400553 {0x1114, "Read error - lba marked bad by application client"},
Douglas Gilbert655ee632013-07-02 00:17:34 -0400554 {0x1115, "Write after sanitize required"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700555
556 {0x1200, "Address mark not found for id field"},
557
558 {0x1300, "Address mark not found for data field"},
559
560 {0x1400, "Recorded entity not found"},
561 {0x1401, "Record not found"},
562 {0x1402, "Filemark or setmark not found"},
563 {0x1403, "End-of-data not found"},
564 {0x1404, "Block sequence error"},
565 {0x1405, "Record not found - recommend reassignment"},
566 {0x1406, "Record not found - data auto-reallocated"},
567 {0x1407, "Locate operation failure"},
568
569 {0x1500, "Random positioning error"},
570 {0x1501, "Mechanical positioning error"},
571 {0x1502, "Positioning error detected by read of medium"},
572
573 {0x1600, "Data synchronization mark error"},
574 {0x1601, "Data sync error - data rewritten"},
575 {0x1602, "Data sync error - recommend rewrite"},
576 {0x1603, "Data sync error - data auto-reallocated"},
577 {0x1604, "Data sync error - recommend reassignment"},
578
579 {0x1700, "Recovered data with no error correction applied"},
580 {0x1701, "Recovered data with retries"},
581 {0x1702, "Recovered data with positive head offset"},
582 {0x1703, "Recovered data with negative head offset"},
583 {0x1704, "Recovered data with retries and/or circ applied"},
584 {0x1705, "Recovered data using previous sector id"},
585 {0x1706, "Recovered data without ECC - data auto-reallocated"},
586 {0x1707, "Recovered data without ECC - recommend reassignment"},
587 {0x1708, "Recovered data without ECC - recommend rewrite"},
588 {0x1709, "Recovered data without ECC - data rewritten"},
589
590 {0x1800, "Recovered data with error correction applied"},
591 {0x1801, "Recovered data with error corr. & retries applied"},
592 {0x1802, "Recovered data - data auto-reallocated"},
593 {0x1803, "Recovered data with CIRC"},
594 {0x1804, "Recovered data with L-EC"},
595 {0x1805, "Recovered data - recommend reassignment"},
596 {0x1806, "Recovered data - recommend rewrite"},
597 {0x1807, "Recovered data with ECC - data rewritten"},
598 {0x1808, "Recovered data with linking"},
599
600 {0x1900, "Defect list error"},
601 {0x1901, "Defect list not available"},
602 {0x1902, "Defect list error in primary list"},
603 {0x1903, "Defect list error in grown list"},
604
605 {0x1A00, "Parameter list length error"},
606
607 {0x1B00, "Synchronous data transfer error"},
608
609 {0x1C00, "Defect list not found"},
610 {0x1C01, "Primary defect list not found"},
611 {0x1C02, "Grown defect list not found"},
612
613 {0x1D00, "Miscompare during verify operation"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400614 {0x1D01, "Miscompare verify of unmapped LBA"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700615
616 {0x1E00, "Recovered id with ECC correction"},
617
618 {0x1F00, "Partial defect list transfer"},
619
620 {0x2000, "Invalid command operation code"},
621 {0x2001, "Access denied - initiator pending-enrolled"},
622 {0x2002, "Access denied - no access rights"},
623 {0x2003, "Access denied - invalid mgmt id key"},
624 {0x2004, "Illegal command while in write capable state"},
625 {0x2005, "Obsolete"},
626 {0x2006, "Illegal command while in explicit address mode"},
627 {0x2007, "Illegal command while in implicit address mode"},
628 {0x2008, "Access denied - enrollment conflict"},
629 {0x2009, "Access denied - invalid LU identifier"},
630 {0x200A, "Access denied - invalid proxy token"},
631 {0x200B, "Access denied - ACL LUN conflict"},
Douglas Gilbert655ee632013-07-02 00:17:34 -0400632 {0x200C, "Illegal command when not in append-only mode"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700633
634 {0x2100, "Logical block address out of range"},
635 {0x2101, "Invalid element address"},
636 {0x2102, "Invalid address for write"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400637 {0x2103, "Invalid write crossing layer jump"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700638
639 {0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"},
640
Douglas Gilbert655ee632013-07-02 00:17:34 -0400641 {0x2300, "Invalid token operation, cause not reportable"},
642 {0x2301, "Invalid token operation, unsupported token type"},
643 {0x2302, "Invalid token operation, remote token usage not supported"},
644 {0x2303, "Invalid token operation, remote rod token creation not "
645 "supported"},
646 {0x2304, "Invalid token operation, token unknown"},
647 {0x2305, "Invalid token operation, token corrupt"},
648 {0x2306, "Invalid token operation, token revoked"},
649 {0x2307, "Invalid token operation, token expired"},
650 {0x2308, "Invalid token operation, token cancelled"},
651 {0x2309, "Invalid token operation, token deleted"},
652 {0x230A, "Invalid token operation, invalid token length"},
653
Linus Torvalds1da177e2005-04-16 15:20:36 -0700654 {0x2400, "Invalid field in cdb"},
655 {0x2401, "CDB decryption error"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400656 {0x2402, "Obsolete"},
657 {0x2403, "Obsolete"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700658 {0x2404, "Security audit value frozen"},
659 {0x2405, "Security working key frozen"},
660 {0x2406, "Nonce not unique"},
661 {0x2407, "Nonce timestamp out of range"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400662 {0x2408, "Invalid XCDB"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700663
664 {0x2500, "Logical unit not supported"},
665
666 {0x2600, "Invalid field in parameter list"},
667 {0x2601, "Parameter not supported"},
668 {0x2602, "Parameter value invalid"},
669 {0x2603, "Threshold parameters not supported"},
670 {0x2604, "Invalid release of persistent reservation"},
671 {0x2605, "Data decryption error"},
672 {0x2606, "Too many target descriptors"},
673 {0x2607, "Unsupported target descriptor type code"},
674 {0x2608, "Too many segment descriptors"},
675 {0x2609, "Unsupported segment descriptor type code"},
676 {0x260A, "Unexpected inexact segment"},
677 {0x260B, "Inline data length exceeded"},
678 {0x260C, "Invalid operation for copy source or destination"},
679 {0x260D, "Copy segment granularity violation"},
680 {0x260E, "Invalid parameter while port is enabled"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400681 {0x260F, "Invalid data-out buffer integrity check value"},
682 {0x2610, "Data decryption key fail limit reached"},
683 {0x2611, "Incomplete key-associated data set"},
684 {0x2612, "Vendor specific key reference not found"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700685
686 {0x2700, "Write protected"},
687 {0x2701, "Hardware write protected"},
688 {0x2702, "Logical unit software write protected"},
689 {0x2703, "Associated write protect"},
690 {0x2704, "Persistent write protect"},
691 {0x2705, "Permanent write protect"},
692 {0x2706, "Conditional write protect"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400693 {0x2707, "Space allocation failed write protect"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700694
695 {0x2800, "Not ready to ready change, medium may have changed"},
696 {0x2801, "Import or export element accessed"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400697 {0x2802, "Format-layer may have changed"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400698 {0x2803, "Import/export element accessed, medium changed"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700699
700 {0x2900, "Power on, reset, or bus device reset occurred"},
701 {0x2901, "Power on occurred"},
702 {0x2902, "Scsi bus reset occurred"},
703 {0x2903, "Bus device reset function occurred"},
704 {0x2904, "Device internal reset"},
705 {0x2905, "Transceiver mode changed to single-ended"},
706 {0x2906, "Transceiver mode changed to lvd"},
707 {0x2907, "I_T nexus loss occurred"},
708
709 {0x2A00, "Parameters changed"},
710 {0x2A01, "Mode parameters changed"},
711 {0x2A02, "Log parameters changed"},
712 {0x2A03, "Reservations preempted"},
713 {0x2A04, "Reservations released"},
714 {0x2A05, "Registrations preempted"},
715 {0x2A06, "Asymmetric access state changed"},
716 {0x2A07, "Implicit asymmetric access state transition failed"},
717 {0x2A08, "Priority changed"},
718 {0x2A09, "Capacity data has changed"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400719 {0x2A0A, "Error history I_T nexus cleared"},
720 {0x2A0B, "Error history snapshot released"},
721 {0x2A0C, "Error recovery attributes have changed"},
722 {0x2A0D, "Data encryption capabilities changed"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400723 {0x2A10, "Timestamp changed"},
724 {0x2A11, "Data encryption parameters changed by another i_t nexus"},
725 {0x2A12, "Data encryption parameters changed by vendor specific "
726 "event"},
727 {0x2A13, "Data encryption key instance counter has changed"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400728 {0x2A14, "SA creation capabilities data has changed"},
Douglas Gilbert655ee632013-07-02 00:17:34 -0400729 {0x2A15, "Medium removal prevention preempted"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700730
731 {0x2B00, "Copy cannot execute since host cannot disconnect"},
732
733 {0x2C00, "Command sequence error"},
734 {0x2C01, "Too many windows specified"},
735 {0x2C02, "Invalid combination of windows specified"},
736 {0x2C03, "Current program area is not empty"},
737 {0x2C04, "Current program area is empty"},
738 {0x2C05, "Illegal power condition request"},
739 {0x2C06, "Persistent prevent conflict"},
740 {0x2C07, "Previous busy status"},
741 {0x2C08, "Previous task set full status"},
742 {0x2C09, "Previous reservation conflict status"},
743 {0x2C0A, "Partition or collection contains user objects"},
744 {0x2C0B, "Not reserved"},
Douglas Gilbert655ee632013-07-02 00:17:34 -0400745 {0x2C0C, "Orwrite generation does not match"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700746
747 {0x2D00, "Overwrite error on update in place"},
748
749 {0x2E00, "Insufficient time for operation"},
750
751 {0x2F00, "Commands cleared by another initiator"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400752 {0x2F01, "Commands cleared by power loss notification"},
Martin K. Petersen62d42a62007-02-28 12:37:06 -0500753 {0x2F02, "Commands cleared by device server"},
Douglas Gilbert655ee632013-07-02 00:17:34 -0400754 {0x2F03, "Some commands cleared by queuing layer event"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700755
756 {0x3000, "Incompatible medium installed"},
757 {0x3001, "Cannot read medium - unknown format"},
758 {0x3002, "Cannot read medium - incompatible format"},
759 {0x3003, "Cleaning cartridge installed"},
760 {0x3004, "Cannot write medium - unknown format"},
761 {0x3005, "Cannot write medium - incompatible format"},
762 {0x3006, "Cannot format medium - incompatible medium"},
763 {0x3007, "Cleaning failure"},
764 {0x3008, "Cannot write - application code mismatch"},
765 {0x3009, "Current session not fixated for append"},
766 {0x300A, "Cleaning request rejected"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400767 {0x300C, "WORM medium - overwrite attempted"},
768 {0x300D, "WORM medium - integrity check"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700769 {0x3010, "Medium not formatted"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400770 {0x3011, "Incompatible volume type"},
771 {0x3012, "Incompatible volume qualifier"},
Douglas Gilbert655ee632013-07-02 00:17:34 -0400772 {0x3013, "Cleaning volume expired"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700773
774 {0x3100, "Medium format corrupted"},
775 {0x3101, "Format command failed"},
776 {0x3102, "Zoned formatting failed due to spare linking"},
Douglas Gilbert655ee632013-07-02 00:17:34 -0400777 {0x3103, "Sanitize command failed"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700778
779 {0x3200, "No defect spare location available"},
780 {0x3201, "Defect list update failure"},
781
782 {0x3300, "Tape length error"},
783
784 {0x3400, "Enclosure failure"},
785
786 {0x3500, "Enclosure services failure"},
787 {0x3501, "Unsupported enclosure function"},
788 {0x3502, "Enclosure services unavailable"},
789 {0x3503, "Enclosure services transfer failure"},
790 {0x3504, "Enclosure services transfer refused"},
791 {0x3505, "Enclosure services checksum error"},
792
793 {0x3600, "Ribbon, ink, or toner failure"},
794
795 {0x3700, "Rounded parameter"},
796
797 {0x3800, "Event status notification"},
798 {0x3802, "Esn - power management class event"},
799 {0x3804, "Esn - media class event"},
800 {0x3806, "Esn - device busy class event"},
Shyam Iyerdeb1cb62011-02-26 01:59:44 -0500801 {0x3807, "Thin Provisioning soft threshold reached"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700802
803 {0x3900, "Saving parameters not supported"},
804
805 {0x3A00, "Medium not present"},
806 {0x3A01, "Medium not present - tray closed"},
807 {0x3A02, "Medium not present - tray open"},
808 {0x3A03, "Medium not present - loadable"},
809 {0x3A04, "Medium not present - medium auxiliary memory accessible"},
810
811 {0x3B00, "Sequential positioning error"},
812 {0x3B01, "Tape position error at beginning-of-medium"},
813 {0x3B02, "Tape position error at end-of-medium"},
814 {0x3B03, "Tape or electronic vertical forms unit not ready"},
815 {0x3B04, "Slew failure"},
816 {0x3B05, "Paper jam"},
817 {0x3B06, "Failed to sense top-of-form"},
818 {0x3B07, "Failed to sense bottom-of-form"},
819 {0x3B08, "Reposition error"},
820 {0x3B09, "Read past end of medium"},
821 {0x3B0A, "Read past beginning of medium"},
822 {0x3B0B, "Position past end of medium"},
823 {0x3B0C, "Position past beginning of medium"},
824 {0x3B0D, "Medium destination element full"},
825 {0x3B0E, "Medium source element empty"},
826 {0x3B0F, "End of medium reached"},
827 {0x3B11, "Medium magazine not accessible"},
828 {0x3B12, "Medium magazine removed"},
829 {0x3B13, "Medium magazine inserted"},
830 {0x3B14, "Medium magazine locked"},
831 {0x3B15, "Medium magazine unlocked"},
832 {0x3B16, "Mechanical positioning or changer error"},
833 {0x3B17, "Read past end of user object"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400834 {0x3B18, "Element disabled"},
835 {0x3B19, "Element enabled"},
836 {0x3B1A, "Data transfer device removed"},
837 {0x3B1B, "Data transfer device inserted"},
Douglas Gilbert655ee632013-07-02 00:17:34 -0400838 {0x3B1C, "Too many logical objects on partition to support "
839 "operation"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700840
841 {0x3D00, "Invalid bits in identify message"},
842
843 {0x3E00, "Logical unit has not self-configured yet"},
844 {0x3E01, "Logical unit failure"},
845 {0x3E02, "Timeout on logical unit"},
846 {0x3E03, "Logical unit failed self-test"},
847 {0x3E04, "Logical unit unable to update self-test log"},
848
849 {0x3F00, "Target operating conditions have changed"},
850 {0x3F01, "Microcode has been changed"},
851 {0x3F02, "Changed operating definition"},
852 {0x3F03, "Inquiry data has changed"},
853 {0x3F04, "Component device attached"},
854 {0x3F05, "Device identifier changed"},
855 {0x3F06, "Redundancy group created or modified"},
856 {0x3F07, "Redundancy group deleted"},
857 {0x3F08, "Spare created or modified"},
858 {0x3F09, "Spare deleted"},
859 {0x3F0A, "Volume set created or modified"},
860 {0x3F0B, "Volume set deleted"},
861 {0x3F0C, "Volume set deassigned"},
862 {0x3F0D, "Volume set reassigned"},
863 {0x3F0E, "Reported luns data has changed"},
864 {0x3F0F, "Echo buffer overwritten"},
865 {0x3F10, "Medium loadable"},
866 {0x3F11, "Medium auxiliary memory accessible"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400867 {0x3F12, "iSCSI IP address added"},
868 {0x3F13, "iSCSI IP address removed"},
869 {0x3F14, "iSCSI IP address changed"},
Douglas Gilbert655ee632013-07-02 00:17:34 -0400870 {0x3F15, "Inspect referrals sense descriptors"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700871/*
872 * {0x40NN, "Ram failure"},
873 * {0x40NN, "Diagnostic failure on component nn"},
874 * {0x41NN, "Data path failure"},
875 * {0x42NN, "Power-on or self-test failure"},
876 */
877 {0x4300, "Message error"},
878
879 {0x4400, "Internal target failure"},
Douglas Gilbert655ee632013-07-02 00:17:34 -0400880 {0x4401, "Persistent reservation information lost"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400881 {0x4471, "ATA device failed set features"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700882
883 {0x4500, "Select or reselect failure"},
884
885 {0x4600, "Unsuccessful soft reset"},
886
887 {0x4700, "Scsi parity error"},
888 {0x4701, "Data phase CRC error detected"},
889 {0x4702, "Scsi parity error detected during st data phase"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400890 {0x4703, "Information unit iuCRC error detected"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700891 {0x4704, "Asynchronous information protection error detected"},
892 {0x4705, "Protocol service CRC error"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400893 {0x4706, "Phy test function in progress"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700894 {0x477f, "Some commands cleared by iSCSI Protocol event"},
895
896 {0x4800, "Initiator detected error message received"},
897
898 {0x4900, "Invalid message error"},
899
900 {0x4A00, "Command phase error"},
901
902 {0x4B00, "Data phase error"},
903 {0x4B01, "Invalid target port transfer tag received"},
904 {0x4B02, "Too much write data"},
905 {0x4B03, "Ack/nak timeout"},
906 {0x4B04, "Nak received"},
907 {0x4B05, "Data offset error"},
908 {0x4B06, "Initiator response timeout"},
Douglas Gilbert655ee632013-07-02 00:17:34 -0400909 {0x4B07, "Connection lost"},
910 {0x4B08, "Data-in buffer overflow - data buffer size"},
911 {0x4B09, "Data-in buffer overflow - data buffer descriptor area"},
912 {0x4B0A, "Data-in buffer error"},
913 {0x4B0B, "Data-out buffer overflow - data buffer size"},
914 {0x4B0C, "Data-out buffer overflow - data buffer descriptor area"},
915 {0x4B0D, "Data-out buffer error"},
916 {0x4B0E, "PCIe fabric error"},
917 {0x4B0F, "PCIe completion timeout"},
918 {0x4B10, "PCIe completer abort"},
919 {0x4B11, "PCIe poisoned tlp received"},
920 {0x4B12, "PCIe eCRC check failed"},
921 {0x4B13, "PCIe unsupported request"},
922 {0x4B14, "PCIe acs violation"},
923 {0x4B15, "PCIe tlp prefix blocked"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700924
925 {0x4C00, "Logical unit failed self-configuration"},
926/*
927 * {0x4DNN, "Tagged overlapped commands (nn = queue tag)"},
928 */
929 {0x4E00, "Overlapped commands attempted"},
930
931 {0x5000, "Write append error"},
932 {0x5001, "Write append position error"},
933 {0x5002, "Position error related to timing"},
934
935 {0x5100, "Erase failure"},
936 {0x5101, "Erase failure - incomplete erase operation detected"},
937
938 {0x5200, "Cartridge fault"},
939
940 {0x5300, "Media load or eject failed"},
941 {0x5301, "Unload tape failure"},
942 {0x5302, "Medium removal prevented"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400943 {0x5303, "Medium removal prevented by data transfer element"},
944 {0x5304, "Medium thread or unthread failure"},
Douglas Gilbert655ee632013-07-02 00:17:34 -0400945 {0x5305, "Volume identifier invalid"},
946 {0x5306, "Volume identifier missing"},
947 {0x5307, "Duplicate volume identifier"},
948 {0x5308, "Element status unknown"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700949
950 {0x5400, "Scsi to host system interface failure"},
951
952 {0x5500, "System resource failure"},
953 {0x5501, "System buffer full"},
954 {0x5502, "Insufficient reservation resources"},
955 {0x5503, "Insufficient resources"},
956 {0x5504, "Insufficient registration resources"},
957 {0x5505, "Insufficient access control resources"},
958 {0x5506, "Auxiliary memory out of space"},
959 {0x5507, "Quota error"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400960 {0x5508, "Maximum number of supplemental decryption keys exceeded"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400961 {0x5509, "Medium auxiliary memory not accessible"},
962 {0x550A, "Data currently unavailable"},
Douglas Gilbert655ee632013-07-02 00:17:34 -0400963 {0x550B, "Insufficient power for operation"},
964 {0x550C, "Insufficient resources to create rod"},
965 {0x550D, "Insufficient resources to create rod token"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700966
967 {0x5700, "Unable to recover table-of-contents"},
968
969 {0x5800, "Generation does not exist"},
970
971 {0x5900, "Updated block read"},
972
973 {0x5A00, "Operator request or state change input"},
974 {0x5A01, "Operator medium removal request"},
975 {0x5A02, "Operator selected write protect"},
976 {0x5A03, "Operator selected write permit"},
977
978 {0x5B00, "Log exception"},
979 {0x5B01, "Threshold condition met"},
980 {0x5B02, "Log counter at maximum"},
981 {0x5B03, "Log list codes exhausted"},
982
983 {0x5C00, "Rpl status change"},
984 {0x5C01, "Spindles synchronized"},
985 {0x5C02, "Spindles not synchronized"},
986
987 {0x5D00, "Failure prediction threshold exceeded"},
988 {0x5D01, "Media failure prediction threshold exceeded"},
989 {0x5D02, "Logical unit failure prediction threshold exceeded"},
990 {0x5D03, "Spare area exhaustion prediction threshold exceeded"},
991 {0x5D10, "Hardware impending failure general hard drive failure"},
992 {0x5D11, "Hardware impending failure drive error rate too high"},
993 {0x5D12, "Hardware impending failure data error rate too high"},
994 {0x5D13, "Hardware impending failure seek error rate too high"},
995 {0x5D14, "Hardware impending failure too many block reassigns"},
996 {0x5D15, "Hardware impending failure access times too high"},
997 {0x5D16, "Hardware impending failure start unit times too high"},
998 {0x5D17, "Hardware impending failure channel parametrics"},
999 {0x5D18, "Hardware impending failure controller detected"},
1000 {0x5D19, "Hardware impending failure throughput performance"},
1001 {0x5D1A, "Hardware impending failure seek time performance"},
1002 {0x5D1B, "Hardware impending failure spin-up retry count"},
1003 {0x5D1C, "Hardware impending failure drive calibration retry count"},
1004 {0x5D20, "Controller impending failure general hard drive failure"},
1005 {0x5D21, "Controller impending failure drive error rate too high"},
1006 {0x5D22, "Controller impending failure data error rate too high"},
1007 {0x5D23, "Controller impending failure seek error rate too high"},
1008 {0x5D24, "Controller impending failure too many block reassigns"},
1009 {0x5D25, "Controller impending failure access times too high"},
1010 {0x5D26, "Controller impending failure start unit times too high"},
1011 {0x5D27, "Controller impending failure channel parametrics"},
1012 {0x5D28, "Controller impending failure controller detected"},
1013 {0x5D29, "Controller impending failure throughput performance"},
1014 {0x5D2A, "Controller impending failure seek time performance"},
1015 {0x5D2B, "Controller impending failure spin-up retry count"},
1016 {0x5D2C, "Controller impending failure drive calibration retry count"},
1017 {0x5D30, "Data channel impending failure general hard drive failure"},
1018 {0x5D31, "Data channel impending failure drive error rate too high"},
1019 {0x5D32, "Data channel impending failure data error rate too high"},
1020 {0x5D33, "Data channel impending failure seek error rate too high"},
1021 {0x5D34, "Data channel impending failure too many block reassigns"},
1022 {0x5D35, "Data channel impending failure access times too high"},
1023 {0x5D36, "Data channel impending failure start unit times too high"},
1024 {0x5D37, "Data channel impending failure channel parametrics"},
1025 {0x5D38, "Data channel impending failure controller detected"},
1026 {0x5D39, "Data channel impending failure throughput performance"},
1027 {0x5D3A, "Data channel impending failure seek time performance"},
1028 {0x5D3B, "Data channel impending failure spin-up retry count"},
1029 {0x5D3C, "Data channel impending failure drive calibration retry "
1030 "count"},
1031 {0x5D40, "Servo impending failure general hard drive failure"},
1032 {0x5D41, "Servo impending failure drive error rate too high"},
1033 {0x5D42, "Servo impending failure data error rate too high"},
1034 {0x5D43, "Servo impending failure seek error rate too high"},
1035 {0x5D44, "Servo impending failure too many block reassigns"},
1036 {0x5D45, "Servo impending failure access times too high"},
1037 {0x5D46, "Servo impending failure start unit times too high"},
1038 {0x5D47, "Servo impending failure channel parametrics"},
1039 {0x5D48, "Servo impending failure controller detected"},
1040 {0x5D49, "Servo impending failure throughput performance"},
1041 {0x5D4A, "Servo impending failure seek time performance"},
1042 {0x5D4B, "Servo impending failure spin-up retry count"},
1043 {0x5D4C, "Servo impending failure drive calibration retry count"},
1044 {0x5D50, "Spindle impending failure general hard drive failure"},
1045 {0x5D51, "Spindle impending failure drive error rate too high"},
1046 {0x5D52, "Spindle impending failure data error rate too high"},
1047 {0x5D53, "Spindle impending failure seek error rate too high"},
1048 {0x5D54, "Spindle impending failure too many block reassigns"},
1049 {0x5D55, "Spindle impending failure access times too high"},
1050 {0x5D56, "Spindle impending failure start unit times too high"},
1051 {0x5D57, "Spindle impending failure channel parametrics"},
1052 {0x5D58, "Spindle impending failure controller detected"},
1053 {0x5D59, "Spindle impending failure throughput performance"},
1054 {0x5D5A, "Spindle impending failure seek time performance"},
1055 {0x5D5B, "Spindle impending failure spin-up retry count"},
1056 {0x5D5C, "Spindle impending failure drive calibration retry count"},
1057 {0x5D60, "Firmware impending failure general hard drive failure"},
1058 {0x5D61, "Firmware impending failure drive error rate too high"},
1059 {0x5D62, "Firmware impending failure data error rate too high"},
1060 {0x5D63, "Firmware impending failure seek error rate too high"},
1061 {0x5D64, "Firmware impending failure too many block reassigns"},
1062 {0x5D65, "Firmware impending failure access times too high"},
1063 {0x5D66, "Firmware impending failure start unit times too high"},
1064 {0x5D67, "Firmware impending failure channel parametrics"},
1065 {0x5D68, "Firmware impending failure controller detected"},
1066 {0x5D69, "Firmware impending failure throughput performance"},
1067 {0x5D6A, "Firmware impending failure seek time performance"},
1068 {0x5D6B, "Firmware impending failure spin-up retry count"},
1069 {0x5D6C, "Firmware impending failure drive calibration retry count"},
1070 {0x5DFF, "Failure prediction threshold exceeded (false)"},
1071
1072 {0x5E00, "Low power condition on"},
1073 {0x5E01, "Idle condition activated by timer"},
1074 {0x5E02, "Standby condition activated by timer"},
1075 {0x5E03, "Idle condition activated by command"},
1076 {0x5E04, "Standby condition activated by command"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -04001077 {0x5E05, "Idle_b condition activated by timer"},
1078 {0x5E06, "Idle_b condition activated by command"},
1079 {0x5E07, "Idle_c condition activated by timer"},
1080 {0x5E08, "Idle_c condition activated by command"},
1081 {0x5E09, "Standby_y condition activated by timer"},
1082 {0x5E0A, "Standby_y condition activated by command"},
Linus Torvalds1da177e2005-04-16 15:20:36 -07001083 {0x5E41, "Power state change to active"},
1084 {0x5E42, "Power state change to idle"},
1085 {0x5E43, "Power state change to standby"},
1086 {0x5E45, "Power state change to sleep"},
1087 {0x5E47, "Power state change to device control"},
1088
1089 {0x6000, "Lamp failure"},
1090
1091 {0x6100, "Video acquisition error"},
1092 {0x6101, "Unable to acquire video"},
1093 {0x6102, "Out of focus"},
1094
1095 {0x6200, "Scan head positioning error"},
1096
1097 {0x6300, "End of user area encountered on this track"},
1098 {0x6301, "Packet does not fit in available space"},
1099
1100 {0x6400, "Illegal mode for this track"},
1101 {0x6401, "Invalid packet size"},
1102
1103 {0x6500, "Voltage fault"},
1104
1105 {0x6600, "Automatic document feeder cover up"},
1106 {0x6601, "Automatic document feeder lift up"},
1107 {0x6602, "Document jam in automatic document feeder"},
1108 {0x6603, "Document miss feed automatic in document feeder"},
1109
1110 {0x6700, "Configuration failure"},
1111 {0x6701, "Configuration of incapable logical units failed"},
1112 {0x6702, "Add logical unit failed"},
1113 {0x6703, "Modification of logical unit failed"},
1114 {0x6704, "Exchange of logical unit failed"},
1115 {0x6705, "Remove of logical unit failed"},
1116 {0x6706, "Attachment of logical unit failed"},
1117 {0x6707, "Creation of logical unit failed"},
1118 {0x6708, "Assign failure occurred"},
1119 {0x6709, "Multiply assigned logical unit"},
1120 {0x670A, "Set target port groups command failed"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -04001121 {0x670B, "ATA device feature not enabled"},
Linus Torvalds1da177e2005-04-16 15:20:36 -07001122
1123 {0x6800, "Logical unit not configured"},
Douglas Gilbert655ee632013-07-02 00:17:34 -04001124 {0x6801, "Subsidiary logical unit not configured"},
Linus Torvalds1da177e2005-04-16 15:20:36 -07001125
1126 {0x6900, "Data loss on logical unit"},
1127 {0x6901, "Multiple logical unit failures"},
1128 {0x6902, "Parity/data mismatch"},
1129
1130 {0x6A00, "Informational, refer to log"},
1131
1132 {0x6B00, "State change has occurred"},
1133 {0x6B01, "Redundancy level got better"},
1134 {0x6B02, "Redundancy level got worse"},
1135
1136 {0x6C00, "Rebuild failure occurred"},
1137
1138 {0x6D00, "Recalculate failure occurred"},
1139
1140 {0x6E00, "Command to logical unit failed"},
1141
1142 {0x6F00, "Copy protection key exchange failure - authentication "
1143 "failure"},
1144 {0x6F01, "Copy protection key exchange failure - key not present"},
1145 {0x6F02, "Copy protection key exchange failure - key not established"},
1146 {0x6F03, "Read of scrambled sector without authentication"},
1147 {0x6F04, "Media region code is mismatched to logical unit region"},
1148 {0x6F05, "Drive region must be permanent/region reset count error"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -04001149 {0x6F06, "Insufficient block count for binding nonce recording"},
1150 {0x6F07, "Conflict in binding nonce recording"},
Linus Torvalds1da177e2005-04-16 15:20:36 -07001151/*
1152 * {0x70NN, "Decompression exception short algorithm id of nn"},
1153 */
1154 {0x7100, "Decompression exception long algorithm id"},
1155
1156 {0x7200, "Session fixation error"},
1157 {0x7201, "Session fixation error writing lead-in"},
1158 {0x7202, "Session fixation error writing lead-out"},
1159 {0x7203, "Session fixation error - incomplete track in session"},
1160 {0x7204, "Empty or partially written reserved track"},
1161 {0x7205, "No more track reservations allowed"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -04001162 {0x7206, "RMZ extension is not allowed"},
1163 {0x7207, "No more test zone extensions are allowed"},
Linus Torvalds1da177e2005-04-16 15:20:36 -07001164
1165 {0x7300, "Cd control error"},
1166 {0x7301, "Power calibration area almost full"},
1167 {0x7302, "Power calibration area is full"},
1168 {0x7303, "Power calibration area error"},
1169 {0x7304, "Program memory area update failure"},
1170 {0x7305, "Program memory area is full"},
1171 {0x7306, "RMA/PMA is almost full"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -04001172 {0x7310, "Current power calibration area almost full"},
1173 {0x7311, "Current power calibration area is full"},
1174 {0x7317, "RDZ is full"},
1175
1176 {0x7400, "Security error"},
1177 {0x7401, "Unable to decrypt data"},
1178 {0x7402, "Unencrypted data encountered while decrypting"},
1179 {0x7403, "Incorrect data encryption key"},
1180 {0x7404, "Cryptographic integrity validation failed"},
1181 {0x7405, "Error decrypting data"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -04001182 {0x7406, "Unknown signature verification key"},
1183 {0x7407, "Encryption parameters not useable"},
1184 {0x7408, "Digital signature validation failure"},
1185 {0x7409, "Encryption mode mismatch on read"},
1186 {0x740A, "Encrypted block not raw read enabled"},
1187 {0x740B, "Incorrect Encryption parameters"},
1188 {0x740C, "Unable to decrypt parameter list"},
1189 {0x740D, "Encryption algorithm disabled"},
1190 {0x7410, "SA creation parameter value invalid"},
1191 {0x7411, "SA creation parameter value rejected"},
1192 {0x7412, "Invalid SA usage"},
1193 {0x7421, "Data Encryption configuration prevented"},
1194 {0x7430, "SA creation parameter not supported"},
1195 {0x7440, "Authentication failed"},
1196 {0x7461, "External data encryption key manager access error"},
1197 {0x7462, "External data encryption key manager error"},
1198 {0x7463, "External data encryption key not found"},
1199 {0x7464, "External data encryption request not authorized"},
1200 {0x746E, "External data encryption control timeout"},
1201 {0x746F, "External data encryption control error"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -04001202 {0x7471, "Logical unit access not authorized"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -04001203 {0x7479, "Security conflict in translated device"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -04001204
Linus Torvalds1da177e2005-04-16 15:20:36 -07001205 {0, NULL}
1206};
1207
1208struct error_info2 {
1209 unsigned char code1, code2_min, code2_max;
Hannes Reinecked811b842014-10-24 14:26:45 +02001210 const char * str;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001211 const char * fmt;
1212};
1213
Arjan van de Ven0ad78202005-11-28 16:22:25 +01001214static const struct error_info2 additional2[] =
Linus Torvalds1da177e2005-04-16 15:20:36 -07001215{
Hannes Reinecked811b842014-10-24 14:26:45 +02001216 {0x40, 0x00, 0x7f, "Ram failure", ""},
1217 {0x40, 0x80, 0xff, "Diagnostic failure on component", ""},
1218 {0x41, 0x00, 0xff, "Data path failure", ""},
1219 {0x42, 0x00, 0xff, "Power-on or self-test failure", ""},
1220 {0x4D, 0x00, 0xff, "Tagged overlapped commands", "task tag "},
1221 {0x70, 0x00, 0xff, "Decompression exception", "short algorithm id of "},
1222 {0, 0, 0, NULL, NULL}
Linus Torvalds1da177e2005-04-16 15:20:36 -07001223};
1224
1225/* description of the sense key values */
Arjan van de Ven0ad78202005-11-28 16:22:25 +01001226static const char * const snstext[] = {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001227 "No Sense", /* 0: There is no sense information */
1228 "Recovered Error", /* 1: The last command completed successfully
1229 but used error correction */
1230 "Not Ready", /* 2: The addressed target is not ready */
1231 "Medium Error", /* 3: Data error detected on the medium */
1232 "Hardware Error", /* 4: Controller or device failure */
1233 "Illegal Request", /* 5: Error in request */
1234 "Unit Attention", /* 6: Removable medium was changed, or
1235 the target has been reset, or ... */
1236 "Data Protect", /* 7: Access to the data is blocked */
1237 "Blank Check", /* 8: Reached unexpected written or unwritten
1238 region of the medium */
1239 "Vendor Specific(9)",
1240 "Copy Aborted", /* A: COPY or COMPARE was aborted */
1241 "Aborted Command", /* B: The target aborted the command */
Douglas Gilbert655ee632013-07-02 00:17:34 -04001242 "Equal", /* C: A SEARCH DATA command found data equal,
1243 reserved in SPC-4 rev 36 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001244 "Volume Overflow", /* D: Medium full with still data to be written */
1245 "Miscompare", /* E: Source data and data on the medium
1246 do not agree */
Douglas Gilbert655ee632013-07-02 00:17:34 -04001247 "Completed", /* F: command completed sense data reported,
1248 may occur for successful command */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001249};
1250#endif
1251
1252/* Get sense key string or NULL if not available */
1253const char *
1254scsi_sense_key_string(unsigned char key) {
1255#ifdef CONFIG_SCSI_CONSTANTS
1256 if (key <= 0xE)
1257 return snstext[key];
1258#endif
1259 return NULL;
1260}
1261EXPORT_SYMBOL(scsi_sense_key_string);
1262
1263/*
1264 * Get additional sense code string or NULL if not available.
1265 * This string may contain a "%x" and should be printed with ascq as arg.
1266 */
1267const char *
Hannes Reinecked811b842014-10-24 14:26:45 +02001268scsi_extd_sense_format(unsigned char asc, unsigned char ascq, const char **fmt)
1269{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001270#ifdef CONFIG_SCSI_CONSTANTS
1271 int i;
1272 unsigned short code = ((asc << 8) | ascq);
1273
Dan Carpenter249b15b2014-12-02 14:07:30 +03001274 *fmt = NULL;
Douglas Gilbertb4567ca2009-06-25 15:43:02 -04001275 for (i = 0; additional[i].text; i++)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001276 if (additional[i].code12 == code)
1277 return additional[i].text;
Douglas Gilbertb4567ca2009-06-25 15:43:02 -04001278 for (i = 0; additional2[i].fmt; i++) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001279 if (additional2[i].code1 == asc &&
Douglas Gilbertb4567ca2009-06-25 15:43:02 -04001280 ascq >= additional2[i].code2_min &&
Hannes Reinecked811b842014-10-24 14:26:45 +02001281 ascq <= additional2[i].code2_max) {
1282 *fmt = additional2[i].fmt;
1283 return additional2[i].str;
1284 }
Douglas Gilbertb4567ca2009-06-25 15:43:02 -04001285 }
Dan Carpenter249b15b2014-12-02 14:07:30 +03001286#else
1287 *fmt = NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001288#endif
1289 return NULL;
1290}
1291EXPORT_SYMBOL(scsi_extd_sense_format);
1292
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001293void
Hannes Reinecked811b842014-10-24 14:26:45 +02001294scsi_show_extd_sense(const struct scsi_device *sdev, const char *name,
1295 unsigned char asc, unsigned char ascq)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001296{
Hannes Reinecked811b842014-10-24 14:26:45 +02001297 const char *extd_sense_fmt = NULL;
1298 const char *extd_sense_str = scsi_extd_sense_format(asc, ascq,
1299 &extd_sense_fmt);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001300
Hannes Reinecked811b842014-10-24 14:26:45 +02001301 if (extd_sense_str) {
1302 if (extd_sense_fmt)
1303 sdev_prefix_printk(KERN_INFO, sdev, name,
1304 "Add. Sense: %s (%s%x)",
1305 extd_sense_str, extd_sense_fmt,
1306 ascq);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001307 else
Hannes Reinecked811b842014-10-24 14:26:45 +02001308 sdev_prefix_printk(KERN_INFO, sdev, name,
1309 "Add. Sense: %s", extd_sense_str);
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001310
Hannes Reinecked811b842014-10-24 14:26:45 +02001311 } else {
1312 sdev_prefix_printk(KERN_INFO, sdev, name,
1313 "%sASC=0x%x %sASCQ=0x%x\n",
1314 asc >= 0x80 ? "<<vendor>> " : "", asc,
1315 ascq >= 0x80 ? "<<vendor>> " : "", ascq);
1316 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001317}
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001318EXPORT_SYMBOL(scsi_show_extd_sense);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001319
James Bottomleyea73a9f2005-08-28 11:33:52 -05001320void
Hannes Reinecked811b842014-10-24 14:26:45 +02001321scsi_show_sense_hdr(const struct scsi_device *sdev, const char *name,
1322 const struct scsi_sense_hdr *sshdr)
James Bottomleyea73a9f2005-08-28 11:33:52 -05001323{
1324 const char *sense_txt;
James Bottomleyea73a9f2005-08-28 11:33:52 -05001325
1326 sense_txt = scsi_sense_key_string(sshdr->sense_key);
1327 if (sense_txt)
Hannes Reinecked811b842014-10-24 14:26:45 +02001328 sdev_prefix_printk(KERN_INFO, sdev, name,
1329 "Sense Key : %s [%s]%s\n", sense_txt,
1330 scsi_sense_is_deferred(sshdr) ?
1331 "deferred" : "current",
1332 sshdr->response_code >= 0x72 ?
1333 " [descriptor]" : "");
James Bottomleyea73a9f2005-08-28 11:33:52 -05001334 else
Hannes Reinecked811b842014-10-24 14:26:45 +02001335 sdev_prefix_printk(KERN_INFO, sdev, name,
1336 "Sense Key : 0x%x [%s]%s", sshdr->sense_key,
1337 scsi_sense_is_deferred(sshdr) ?
1338 "deferred" : "current",
1339 sshdr->response_code >= 0x72 ?
1340 " [descriptor]" : "");
James Bottomleyea73a9f2005-08-28 11:33:52 -05001341}
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001342EXPORT_SYMBOL(scsi_show_sense_hdr);
1343
1344/*
1345 * Print normalized SCSI sense header with a prefix.
1346 */
1347void
Hannes Reinecked811b842014-10-24 14:26:45 +02001348scsi_print_sense_hdr(const struct scsi_device *sdev, const char *name,
1349 const struct scsi_sense_hdr *sshdr)
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001350{
Hannes Reinecked811b842014-10-24 14:26:45 +02001351 scsi_show_sense_hdr(sdev, name, sshdr);
1352 scsi_show_extd_sense(sdev, name, sshdr->asc, sshdr->ascq);
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001353}
James Bottomleyea73a9f2005-08-28 11:33:52 -05001354EXPORT_SYMBOL(scsi_print_sense_hdr);
1355
Adrian Bunk8f8bf7e2007-08-10 14:50:43 -07001356static void
Hannes Reinecke149d18c2014-10-24 14:26:50 +02001357scsi_dump_sense_buffer(const unsigned char *sense_buffer, int sense_len)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001358{
Hannes Reinecke149d18c2014-10-24 14:26:50 +02001359 int k, num;
Douglas Gilbert655ee632013-07-02 00:17:34 -04001360
Hannes Reinecke149d18c2014-10-24 14:26:50 +02001361 num = (sense_len < 32) ? sense_len : 32;
1362 printk("Unrecognized sense data (in hex):");
1363 for (k = 0; k < num; ++k) {
1364 if (0 == (k % 16)) {
1365 printk("\n");
1366 printk(KERN_INFO " ");
Linus Torvalds1da177e2005-04-16 15:20:36 -07001367 }
Hannes Reinecke149d18c2014-10-24 14:26:50 +02001368 printk("%02x ", sense_buffer[k]);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001369 }
Hannes Reinecke149d18c2014-10-24 14:26:50 +02001370 printk("\n");
1371 return;
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001372}
1373
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001374/* Normalize and print sense buffer with name prefix */
Hannes Reinecked811b842014-10-24 14:26:45 +02001375void __scsi_print_sense(const struct scsi_device *sdev, const char *name,
1376 const unsigned char *sense_buffer, int sense_len)
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001377{
1378 struct scsi_sense_hdr sshdr;
1379
Hannes Reinecke149d18c2014-10-24 14:26:50 +02001380 if (!scsi_normalize_sense(sense_buffer, sense_len, &sshdr)) {
1381 scsi_dump_sense_buffer(sense_buffer, sense_len);
1382 return;
1383 }
Hannes Reinecked811b842014-10-24 14:26:45 +02001384 scsi_show_sense_hdr(sdev, name, &sshdr);
Hannes Reinecked811b842014-10-24 14:26:45 +02001385 scsi_show_extd_sense(sdev, name, sshdr.asc, sshdr.ascq);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001386}
1387EXPORT_SYMBOL(__scsi_print_sense);
1388
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001389/* Normalize and print sense buffer in SCSI command */
Hannes Reinecked811b842014-10-24 14:26:45 +02001390void scsi_print_sense(const struct scsi_cmnd *cmd)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001391{
Hannes Reinecked811b842014-10-24 14:26:45 +02001392 struct gendisk *disk = cmd->request->rq_disk;
1393 const char *disk_name = disk ? disk->disk_name : NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001394
Hannes Reinecked811b842014-10-24 14:26:45 +02001395 __scsi_print_sense(cmd->device, disk_name, cmd->sense_buffer,
1396 SCSI_SENSE_BUFFERSIZE);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001397}
1398EXPORT_SYMBOL(scsi_print_sense);
1399
Linus Torvalds1da177e2005-04-16 15:20:36 -07001400#ifdef CONFIG_SCSI_CONSTANTS
1401
Arjan van de Ven0ad78202005-11-28 16:22:25 +01001402static const char * const hostbyte_table[]={
Tobias Klauser6391a112006-06-08 22:23:48 -07001403"DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET",
Linus Torvalds1da177e2005-04-16 15:20:36 -07001404"DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR",
Mike Christiea4dfaa62008-08-19 18:45:25 -05001405"DID_PASSTHROUGH", "DID_SOFT_ERROR", "DID_IMM_RETRY", "DID_REQUEUE",
Moger, Babuf1ba8a42012-07-27 17:28:40 +00001406"DID_TRANSPORT_DISRUPTED", "DID_TRANSPORT_FAILFAST", "DID_TARGET_FAILURE",
1407"DID_NEXUS_FAILURE" };
Linus Torvalds1da177e2005-04-16 15:20:36 -07001408
Arjan van de Ven0ad78202005-11-28 16:22:25 +01001409static const char * const driverbyte_table[]={
Tobias Klauser6391a112006-06-08 22:23:48 -07001410"DRIVER_OK", "DRIVER_BUSY", "DRIVER_SOFT", "DRIVER_MEDIA", "DRIVER_ERROR",
Linus Torvalds1da177e2005-04-16 15:20:36 -07001411"DRIVER_INVALID", "DRIVER_TIMEOUT", "DRIVER_HARD", "DRIVER_SENSE"};
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001412
Linus Torvalds1da177e2005-04-16 15:20:36 -07001413#endif
Hannes Reinecke3cc958c2014-10-24 14:26:59 +02001414
1415const char *scsi_hostbyte_string(int result)
1416{
1417 const char *hb_string = NULL;
1418#ifdef CONFIG_SCSI_CONSTANTS
1419 int hb = host_byte(result);
1420
1421 if (hb < ARRAY_SIZE(hostbyte_table))
1422 hb_string = hostbyte_table[hb];
1423#endif
1424 return hb_string;
1425}
1426EXPORT_SYMBOL(scsi_hostbyte_string);
1427
1428const char *scsi_driverbyte_string(int result)
1429{
1430 const char *db_string = NULL;
1431#ifdef CONFIG_SCSI_CONSTANTS
1432 int db = driver_byte(result);
1433
1434 if (db < ARRAY_SIZE(driverbyte_table))
1435 db_string = driverbyte_table[db];
1436#endif
1437 return db_string;
1438}
1439EXPORT_SYMBOL(scsi_driverbyte_string);
1440
Hannes Reineckec11c0042014-10-24 14:27:01 +02001441#ifdef CONFIG_SCSI_CONSTANTS
1442#define scsi_mlreturn_name(result) { result, #result }
1443static const struct value_name_pair scsi_mlreturn_arr[] = {
1444 scsi_mlreturn_name(NEEDS_RETRY),
1445 scsi_mlreturn_name(SUCCESS),
1446 scsi_mlreturn_name(FAILED),
1447 scsi_mlreturn_name(QUEUED),
1448 scsi_mlreturn_name(SOFT_ERROR),
1449 scsi_mlreturn_name(ADD_TO_MLQUEUE),
1450 scsi_mlreturn_name(TIMEOUT_ERROR),
1451 scsi_mlreturn_name(SCSI_RETURN_NOT_HANDLED),
1452 scsi_mlreturn_name(FAST_IO_FAIL)
1453};
1454#endif
1455
1456const char *scsi_mlreturn_string(int result)
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001457{
Hannes Reineckec11c0042014-10-24 14:27:01 +02001458#ifdef CONFIG_SCSI_CONSTANTS
1459 const struct value_name_pair *arr = scsi_mlreturn_arr;
1460 int k;
1461
1462 for (k = 0; k < ARRAY_SIZE(scsi_mlreturn_arr); ++k, ++arr) {
1463 if (result == arr->value)
1464 return arr->name;
1465 }
1466#endif
1467 return NULL;
1468}
1469EXPORT_SYMBOL(scsi_mlreturn_string);
1470
1471void scsi_print_result(struct scsi_cmnd *cmd, const char *msg, int disposition)
1472{
1473 const char *mlret_string = scsi_mlreturn_string(disposition);
Hannes Reinecke3cc958c2014-10-24 14:26:59 +02001474 const char *hb_string = scsi_hostbyte_string(cmd->result);
1475 const char *db_string = scsi_driverbyte_string(cmd->result);
1476
1477 if (hb_string || db_string)
1478 scmd_printk(KERN_INFO, cmd,
Hannes Reineckec11c0042014-10-24 14:27:01 +02001479 "%s%s Result: hostbyte=%s driverbyte=%s",
1480 msg ? msg : "",
1481 mlret_string ? mlret_string : "UNKNOWN",
Hannes Reinecke3cc958c2014-10-24 14:26:59 +02001482 hb_string ? hb_string : "invalid",
1483 db_string ? db_string : "invalid");
1484 else
1485 scmd_printk(KERN_INFO, cmd,
Hannes Reineckec11c0042014-10-24 14:27:01 +02001486 "%s%s Result: hostbyte=0x%02x driverbyte=0x%02x",
1487 msg ? msg : "",
1488 mlret_string ? mlret_string : "UNKNOWN",
Hannes Reinecke3cc958c2014-10-24 14:26:59 +02001489 host_byte(cmd->result), driver_byte(cmd->result));
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001490}
1491EXPORT_SYMBOL(scsi_print_result);