Naidu Tellapati | 277bb6a | 2015-01-09 14:54:47 -0300 | [diff] [blame] | 1 | /* |
| 2 | * Imagination Technologies Pulse Width Modulator driver |
| 3 | * |
| 4 | * Copyright (c) 2014-2015, Imagination Technologies |
| 5 | * |
| 6 | * Based on drivers/pwm/pwm-tegra.c, Copyright (c) 2010, NVIDIA Corporation |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify |
| 9 | * it under the terms of the GNU General Public License as published by |
| 10 | * the Free Software Foundation; either version 2 of the License. |
| 11 | */ |
| 12 | |
| 13 | #include <linux/clk.h> |
| 14 | #include <linux/err.h> |
| 15 | #include <linux/io.h> |
| 16 | #include <linux/mfd/syscon.h> |
| 17 | #include <linux/module.h> |
| 18 | #include <linux/of.h> |
Naidu Tellapati | 1e70897 | 2015-05-08 18:47:31 -0300 | [diff] [blame] | 19 | #include <linux/of_device.h> |
Naidu Tellapati | 277bb6a | 2015-01-09 14:54:47 -0300 | [diff] [blame] | 20 | #include <linux/platform_device.h> |
| 21 | #include <linux/pwm.h> |
| 22 | #include <linux/regmap.h> |
| 23 | #include <linux/slab.h> |
| 24 | |
| 25 | /* PWM registers */ |
| 26 | #define PWM_CTRL_CFG 0x0000 |
| 27 | #define PWM_CTRL_CFG_NO_SUB_DIV 0 |
| 28 | #define PWM_CTRL_CFG_SUB_DIV0 1 |
| 29 | #define PWM_CTRL_CFG_SUB_DIV1 2 |
| 30 | #define PWM_CTRL_CFG_SUB_DIV0_DIV1 3 |
| 31 | #define PWM_CTRL_CFG_DIV_SHIFT(ch) ((ch) * 2 + 4) |
| 32 | #define PWM_CTRL_CFG_DIV_MASK 0x3 |
| 33 | |
| 34 | #define PWM_CH_CFG(ch) (0x4 + (ch) * 4) |
| 35 | #define PWM_CH_CFG_TMBASE_SHIFT 0 |
| 36 | #define PWM_CH_CFG_DUTY_SHIFT 16 |
| 37 | |
| 38 | #define PERIP_PWM_PDM_CONTROL 0x0140 |
| 39 | #define PERIP_PWM_PDM_CONTROL_CH_MASK 0x1 |
| 40 | #define PERIP_PWM_PDM_CONTROL_CH_SHIFT(ch) ((ch) * 4) |
| 41 | |
Naidu Tellapati | 1e70897 | 2015-05-08 18:47:31 -0300 | [diff] [blame] | 42 | /* |
| 43 | * PWM period is specified with a timebase register, |
| 44 | * in number of step periods. The PWM duty cycle is also |
| 45 | * specified in step periods, in the [0, $timebase] range. |
| 46 | * In other words, the timebase imposes the duty cycle |
| 47 | * resolution. Therefore, let's constraint the timebase to |
| 48 | * a minimum value to allow a sane range of duty cycle values. |
| 49 | * Imposing a minimum timebase, will impose a maximum PWM frequency. |
| 50 | * |
| 51 | * The value chosen is completely arbitrary. |
| 52 | */ |
| 53 | #define MIN_TMBASE_STEPS 16 |
| 54 | |
| 55 | struct img_pwm_soc_data { |
| 56 | u32 max_timebase; |
| 57 | }; |
Naidu Tellapati | 277bb6a | 2015-01-09 14:54:47 -0300 | [diff] [blame] | 58 | |
| 59 | struct img_pwm_chip { |
| 60 | struct device *dev; |
| 61 | struct pwm_chip chip; |
| 62 | struct clk *pwm_clk; |
| 63 | struct clk *sys_clk; |
| 64 | void __iomem *base; |
| 65 | struct regmap *periph_regs; |
Naidu Tellapati | 1e70897 | 2015-05-08 18:47:31 -0300 | [diff] [blame] | 66 | int max_period_ns; |
| 67 | int min_period_ns; |
| 68 | const struct img_pwm_soc_data *data; |
Naidu Tellapati | 277bb6a | 2015-01-09 14:54:47 -0300 | [diff] [blame] | 69 | }; |
| 70 | |
| 71 | static inline struct img_pwm_chip *to_img_pwm_chip(struct pwm_chip *chip) |
| 72 | { |
| 73 | return container_of(chip, struct img_pwm_chip, chip); |
| 74 | } |
| 75 | |
| 76 | static inline void img_pwm_writel(struct img_pwm_chip *chip, |
| 77 | u32 reg, u32 val) |
| 78 | { |
| 79 | writel(val, chip->base + reg); |
| 80 | } |
| 81 | |
| 82 | static inline u32 img_pwm_readl(struct img_pwm_chip *chip, |
| 83 | u32 reg) |
| 84 | { |
| 85 | return readl(chip->base + reg); |
| 86 | } |
| 87 | |
| 88 | static int img_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, |
| 89 | int duty_ns, int period_ns) |
| 90 | { |
| 91 | u32 val, div, duty, timebase; |
| 92 | unsigned long mul, output_clk_hz, input_clk_hz; |
| 93 | struct img_pwm_chip *pwm_chip = to_img_pwm_chip(chip); |
Naidu Tellapati | 1e70897 | 2015-05-08 18:47:31 -0300 | [diff] [blame] | 94 | unsigned int max_timebase = pwm_chip->data->max_timebase; |
| 95 | |
| 96 | if (period_ns < pwm_chip->min_period_ns || |
| 97 | period_ns > pwm_chip->max_period_ns) { |
| 98 | dev_err(chip->dev, "configured period not in range\n"); |
| 99 | return -ERANGE; |
| 100 | } |
Naidu Tellapati | 277bb6a | 2015-01-09 14:54:47 -0300 | [diff] [blame] | 101 | |
| 102 | input_clk_hz = clk_get_rate(pwm_chip->pwm_clk); |
| 103 | output_clk_hz = DIV_ROUND_UP(NSEC_PER_SEC, period_ns); |
| 104 | |
| 105 | mul = DIV_ROUND_UP(input_clk_hz, output_clk_hz); |
Naidu Tellapati | 1e70897 | 2015-05-08 18:47:31 -0300 | [diff] [blame] | 106 | if (mul <= max_timebase) { |
Naidu Tellapati | 277bb6a | 2015-01-09 14:54:47 -0300 | [diff] [blame] | 107 | div = PWM_CTRL_CFG_NO_SUB_DIV; |
| 108 | timebase = DIV_ROUND_UP(mul, 1); |
Naidu Tellapati | 1e70897 | 2015-05-08 18:47:31 -0300 | [diff] [blame] | 109 | } else if (mul <= max_timebase * 8) { |
Naidu Tellapati | 277bb6a | 2015-01-09 14:54:47 -0300 | [diff] [blame] | 110 | div = PWM_CTRL_CFG_SUB_DIV0; |
| 111 | timebase = DIV_ROUND_UP(mul, 8); |
Naidu Tellapati | 1e70897 | 2015-05-08 18:47:31 -0300 | [diff] [blame] | 112 | } else if (mul <= max_timebase * 64) { |
Naidu Tellapati | 277bb6a | 2015-01-09 14:54:47 -0300 | [diff] [blame] | 113 | div = PWM_CTRL_CFG_SUB_DIV1; |
| 114 | timebase = DIV_ROUND_UP(mul, 64); |
Naidu Tellapati | 1e70897 | 2015-05-08 18:47:31 -0300 | [diff] [blame] | 115 | } else if (mul <= max_timebase * 512) { |
Naidu Tellapati | 277bb6a | 2015-01-09 14:54:47 -0300 | [diff] [blame] | 116 | div = PWM_CTRL_CFG_SUB_DIV0_DIV1; |
| 117 | timebase = DIV_ROUND_UP(mul, 512); |
Naidu Tellapati | 1e70897 | 2015-05-08 18:47:31 -0300 | [diff] [blame] | 118 | } else if (mul > max_timebase * 512) { |
Naidu Tellapati | 277bb6a | 2015-01-09 14:54:47 -0300 | [diff] [blame] | 119 | dev_err(chip->dev, |
| 120 | "failed to configure timebase steps/divider value\n"); |
| 121 | return -EINVAL; |
| 122 | } |
| 123 | |
| 124 | duty = DIV_ROUND_UP(timebase * duty_ns, period_ns); |
| 125 | |
| 126 | val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG); |
| 127 | val &= ~(PWM_CTRL_CFG_DIV_MASK << PWM_CTRL_CFG_DIV_SHIFT(pwm->hwpwm)); |
| 128 | val |= (div & PWM_CTRL_CFG_DIV_MASK) << |
| 129 | PWM_CTRL_CFG_DIV_SHIFT(pwm->hwpwm); |
| 130 | img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val); |
| 131 | |
| 132 | val = (duty << PWM_CH_CFG_DUTY_SHIFT) | |
| 133 | (timebase << PWM_CH_CFG_TMBASE_SHIFT); |
| 134 | img_pwm_writel(pwm_chip, PWM_CH_CFG(pwm->hwpwm), val); |
| 135 | |
| 136 | return 0; |
| 137 | } |
| 138 | |
| 139 | static int img_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) |
| 140 | { |
| 141 | u32 val; |
| 142 | struct img_pwm_chip *pwm_chip = to_img_pwm_chip(chip); |
| 143 | |
| 144 | val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG); |
| 145 | val |= BIT(pwm->hwpwm); |
| 146 | img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val); |
| 147 | |
| 148 | regmap_update_bits(pwm_chip->periph_regs, PERIP_PWM_PDM_CONTROL, |
| 149 | PERIP_PWM_PDM_CONTROL_CH_MASK << |
| 150 | PERIP_PWM_PDM_CONTROL_CH_SHIFT(pwm->hwpwm), 0); |
| 151 | |
| 152 | return 0; |
| 153 | } |
| 154 | |
| 155 | static void img_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) |
| 156 | { |
| 157 | u32 val; |
| 158 | struct img_pwm_chip *pwm_chip = to_img_pwm_chip(chip); |
| 159 | |
| 160 | val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG); |
| 161 | val &= ~BIT(pwm->hwpwm); |
| 162 | img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val); |
| 163 | } |
| 164 | |
| 165 | static const struct pwm_ops img_pwm_ops = { |
| 166 | .config = img_pwm_config, |
| 167 | .enable = img_pwm_enable, |
| 168 | .disable = img_pwm_disable, |
| 169 | .owner = THIS_MODULE, |
| 170 | }; |
| 171 | |
Naidu Tellapati | 1e70897 | 2015-05-08 18:47:31 -0300 | [diff] [blame] | 172 | static const struct img_pwm_soc_data pistachio_pwm = { |
| 173 | .max_timebase = 255, |
| 174 | }; |
| 175 | |
| 176 | static const struct of_device_id img_pwm_of_match[] = { |
| 177 | { |
| 178 | .compatible = "img,pistachio-pwm", |
| 179 | .data = &pistachio_pwm, |
| 180 | }, |
| 181 | { } |
| 182 | }; |
| 183 | MODULE_DEVICE_TABLE(of, img_pwm_of_match); |
| 184 | |
Naidu Tellapati | 277bb6a | 2015-01-09 14:54:47 -0300 | [diff] [blame] | 185 | static int img_pwm_probe(struct platform_device *pdev) |
| 186 | { |
| 187 | int ret; |
Naidu Tellapati | 1e70897 | 2015-05-08 18:47:31 -0300 | [diff] [blame] | 188 | u64 val; |
| 189 | unsigned long clk_rate; |
Naidu Tellapati | 277bb6a | 2015-01-09 14:54:47 -0300 | [diff] [blame] | 190 | struct resource *res; |
| 191 | struct img_pwm_chip *pwm; |
Naidu Tellapati | 1e70897 | 2015-05-08 18:47:31 -0300 | [diff] [blame] | 192 | const struct of_device_id *of_dev_id; |
Naidu Tellapati | 277bb6a | 2015-01-09 14:54:47 -0300 | [diff] [blame] | 193 | |
| 194 | pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL); |
| 195 | if (!pwm) |
| 196 | return -ENOMEM; |
| 197 | |
| 198 | pwm->dev = &pdev->dev; |
| 199 | |
| 200 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 201 | pwm->base = devm_ioremap_resource(&pdev->dev, res); |
| 202 | if (IS_ERR(pwm->base)) |
| 203 | return PTR_ERR(pwm->base); |
| 204 | |
Naidu Tellapati | 1e70897 | 2015-05-08 18:47:31 -0300 | [diff] [blame] | 205 | of_dev_id = of_match_device(img_pwm_of_match, &pdev->dev); |
| 206 | if (!of_dev_id) |
| 207 | return -ENODEV; |
| 208 | pwm->data = of_dev_id->data; |
| 209 | |
Naidu Tellapati | 277bb6a | 2015-01-09 14:54:47 -0300 | [diff] [blame] | 210 | pwm->periph_regs = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, |
| 211 | "img,cr-periph"); |
| 212 | if (IS_ERR(pwm->periph_regs)) |
| 213 | return PTR_ERR(pwm->periph_regs); |
| 214 | |
| 215 | pwm->sys_clk = devm_clk_get(&pdev->dev, "sys"); |
| 216 | if (IS_ERR(pwm->sys_clk)) { |
| 217 | dev_err(&pdev->dev, "failed to get system clock\n"); |
| 218 | return PTR_ERR(pwm->sys_clk); |
| 219 | } |
| 220 | |
| 221 | pwm->pwm_clk = devm_clk_get(&pdev->dev, "pwm"); |
| 222 | if (IS_ERR(pwm->pwm_clk)) { |
| 223 | dev_err(&pdev->dev, "failed to get pwm clock\n"); |
| 224 | return PTR_ERR(pwm->pwm_clk); |
| 225 | } |
| 226 | |
| 227 | ret = clk_prepare_enable(pwm->sys_clk); |
| 228 | if (ret < 0) { |
| 229 | dev_err(&pdev->dev, "could not prepare or enable sys clock\n"); |
| 230 | return ret; |
| 231 | } |
| 232 | |
| 233 | ret = clk_prepare_enable(pwm->pwm_clk); |
| 234 | if (ret < 0) { |
| 235 | dev_err(&pdev->dev, "could not prepare or enable pwm clock\n"); |
| 236 | goto disable_sysclk; |
| 237 | } |
| 238 | |
Naidu Tellapati | 1e70897 | 2015-05-08 18:47:31 -0300 | [diff] [blame] | 239 | clk_rate = clk_get_rate(pwm->pwm_clk); |
Wolfram Sang | bea307c | 2016-03-02 23:33:34 +0100 | [diff] [blame] | 240 | if (!clk_rate) { |
| 241 | dev_err(&pdev->dev, "pwm clock has no frequency\n"); |
| 242 | ret = -EINVAL; |
| 243 | goto disable_pwmclk; |
| 244 | } |
Naidu Tellapati | 1e70897 | 2015-05-08 18:47:31 -0300 | [diff] [blame] | 245 | |
| 246 | /* The maximum input clock divider is 512 */ |
| 247 | val = (u64)NSEC_PER_SEC * 512 * pwm->data->max_timebase; |
| 248 | do_div(val, clk_rate); |
| 249 | pwm->max_period_ns = val; |
| 250 | |
| 251 | val = (u64)NSEC_PER_SEC * MIN_TMBASE_STEPS; |
| 252 | do_div(val, clk_rate); |
| 253 | pwm->min_period_ns = val; |
| 254 | |
Naidu Tellapati | 277bb6a | 2015-01-09 14:54:47 -0300 | [diff] [blame] | 255 | pwm->chip.dev = &pdev->dev; |
| 256 | pwm->chip.ops = &img_pwm_ops; |
| 257 | pwm->chip.base = -1; |
| 258 | pwm->chip.npwm = 4; |
| 259 | |
| 260 | ret = pwmchip_add(&pwm->chip); |
| 261 | if (ret < 0) { |
| 262 | dev_err(&pdev->dev, "pwmchip_add failed: %d\n", ret); |
| 263 | goto disable_pwmclk; |
| 264 | } |
| 265 | |
| 266 | platform_set_drvdata(pdev, pwm); |
| 267 | return 0; |
| 268 | |
| 269 | disable_pwmclk: |
| 270 | clk_disable_unprepare(pwm->pwm_clk); |
| 271 | disable_sysclk: |
| 272 | clk_disable_unprepare(pwm->sys_clk); |
| 273 | return ret; |
| 274 | } |
| 275 | |
| 276 | static int img_pwm_remove(struct platform_device *pdev) |
| 277 | { |
| 278 | struct img_pwm_chip *pwm_chip = platform_get_drvdata(pdev); |
| 279 | u32 val; |
| 280 | unsigned int i; |
| 281 | |
| 282 | for (i = 0; i < pwm_chip->chip.npwm; i++) { |
| 283 | val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG); |
| 284 | val &= ~BIT(i); |
| 285 | img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val); |
| 286 | } |
| 287 | |
| 288 | clk_disable_unprepare(pwm_chip->pwm_clk); |
| 289 | clk_disable_unprepare(pwm_chip->sys_clk); |
| 290 | |
| 291 | return pwmchip_remove(&pwm_chip->chip); |
| 292 | } |
| 293 | |
Naidu Tellapati | 277bb6a | 2015-01-09 14:54:47 -0300 | [diff] [blame] | 294 | static struct platform_driver img_pwm_driver = { |
| 295 | .driver = { |
| 296 | .name = "img-pwm", |
| 297 | .of_match_table = img_pwm_of_match, |
| 298 | }, |
| 299 | .probe = img_pwm_probe, |
| 300 | .remove = img_pwm_remove, |
| 301 | }; |
| 302 | module_platform_driver(img_pwm_driver); |
| 303 | |
| 304 | MODULE_AUTHOR("Sai Masarapu <Sai.Masarapu@imgtec.com>"); |
| 305 | MODULE_DESCRIPTION("Imagination Technologies PWM DAC driver"); |
| 306 | MODULE_LICENSE("GPL v2"); |