Paulius Zaleckas | 1df621a | 2009-03-26 10:06:27 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Gemini gpiochip and interrupt routines |
| 3 | * |
| 4 | * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> |
| 5 | * |
| 6 | * Based on plat-mxc/gpio.c: |
| 7 | * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> |
| 8 | * Copyright 2008 Juergen Beisert, kernel@pengutronix.de |
| 9 | * |
| 10 | * This program is free software; you can redistribute it and/or modify |
| 11 | * it under the terms of the GNU General Public License as published by |
| 12 | * the Free Software Foundation; either version 2 of the License, or |
| 13 | * (at your option) any later version. |
| 14 | */ |
| 15 | |
| 16 | #include <linux/kernel.h> |
| 17 | #include <linux/init.h> |
| 18 | #include <linux/io.h> |
| 19 | #include <linux/irq.h> |
| 20 | #include <linux/gpio.h> |
| 21 | |
| 22 | #include <mach/hardware.h> |
| 23 | #include <mach/irqs.h> |
| 24 | |
| 25 | #define GPIO_BASE(x) IO_ADDRESS(GEMINI_GPIO_BASE(x)) |
| 26 | |
| 27 | /* GPIO registers definition */ |
| 28 | #define GPIO_DATA_OUT 0x0 |
| 29 | #define GPIO_DATA_IN 0x4 |
| 30 | #define GPIO_DIR 0x8 |
| 31 | #define GPIO_DATA_SET 0x10 |
| 32 | #define GPIO_DATA_CLR 0x14 |
| 33 | #define GPIO_PULL_EN 0x18 |
| 34 | #define GPIO_PULL_TYPE 0x1C |
| 35 | #define GPIO_INT_EN 0x20 |
| 36 | #define GPIO_INT_STAT 0x24 |
| 37 | #define GPIO_INT_MASK 0x2C |
| 38 | #define GPIO_INT_CLR 0x30 |
| 39 | #define GPIO_INT_TYPE 0x34 |
| 40 | #define GPIO_INT_BOTH_EDGE 0x38 |
| 41 | #define GPIO_INT_LEVEL 0x3C |
| 42 | #define GPIO_DEBOUNCE_EN 0x40 |
| 43 | #define GPIO_DEBOUNCE_PRESCALE 0x44 |
| 44 | |
| 45 | #define GPIO_PORT_NUM 3 |
| 46 | |
| 47 | static void _set_gpio_irqenable(unsigned int base, unsigned int index, |
| 48 | int enable) |
| 49 | { |
| 50 | unsigned int reg; |
| 51 | |
| 52 | reg = __raw_readl(base + GPIO_INT_EN); |
| 53 | reg = (reg & (~(1 << index))) | (!!enable << index); |
| 54 | __raw_writel(reg, base + GPIO_INT_EN); |
| 55 | } |
| 56 | |
| 57 | static void gpio_ack_irq(unsigned int irq) |
| 58 | { |
| 59 | unsigned int gpio = irq_to_gpio(irq); |
| 60 | unsigned int base = GPIO_BASE(gpio / 32); |
| 61 | |
| 62 | __raw_writel(1 << (gpio % 32), base + GPIO_INT_CLR); |
| 63 | } |
| 64 | |
| 65 | static void gpio_mask_irq(unsigned int irq) |
| 66 | { |
| 67 | unsigned int gpio = irq_to_gpio(irq); |
| 68 | unsigned int base = GPIO_BASE(gpio / 32); |
| 69 | |
| 70 | _set_gpio_irqenable(base, gpio % 32, 0); |
| 71 | } |
| 72 | |
| 73 | static void gpio_unmask_irq(unsigned int irq) |
| 74 | { |
| 75 | unsigned int gpio = irq_to_gpio(irq); |
| 76 | unsigned int base = GPIO_BASE(gpio / 32); |
| 77 | |
| 78 | _set_gpio_irqenable(base, gpio % 32, 1); |
| 79 | } |
| 80 | |
| 81 | static int gpio_set_irq_type(unsigned int irq, unsigned int type) |
| 82 | { |
| 83 | unsigned int gpio = irq_to_gpio(irq); |
| 84 | unsigned int gpio_mask = 1 << (gpio % 32); |
| 85 | unsigned int base = GPIO_BASE(gpio / 32); |
| 86 | unsigned int reg_both, reg_level, reg_type; |
| 87 | |
| 88 | reg_type = __raw_readl(base + GPIO_INT_TYPE); |
Roel Kluin | 079e109 | 2010-02-18 21:54:11 +0200 | [diff] [blame] | 89 | reg_level = __raw_readl(base + GPIO_INT_LEVEL); |
Paulius Zaleckas | 1df621a | 2009-03-26 10:06:27 +0200 | [diff] [blame] | 90 | reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE); |
| 91 | |
| 92 | switch (type) { |
| 93 | case IRQ_TYPE_EDGE_BOTH: |
| 94 | reg_type &= ~gpio_mask; |
| 95 | reg_both |= gpio_mask; |
| 96 | break; |
| 97 | case IRQ_TYPE_EDGE_RISING: |
| 98 | reg_type &= ~gpio_mask; |
| 99 | reg_both &= ~gpio_mask; |
| 100 | reg_level &= ~gpio_mask; |
| 101 | break; |
| 102 | case IRQ_TYPE_EDGE_FALLING: |
| 103 | reg_type &= ~gpio_mask; |
| 104 | reg_both &= ~gpio_mask; |
| 105 | reg_level |= gpio_mask; |
| 106 | break; |
| 107 | case IRQ_TYPE_LEVEL_HIGH: |
| 108 | reg_type |= gpio_mask; |
| 109 | reg_level &= ~gpio_mask; |
| 110 | break; |
| 111 | case IRQ_TYPE_LEVEL_LOW: |
| 112 | reg_type |= gpio_mask; |
| 113 | reg_level |= gpio_mask; |
| 114 | break; |
| 115 | default: |
| 116 | return -EINVAL; |
| 117 | } |
| 118 | |
| 119 | __raw_writel(reg_type, base + GPIO_INT_TYPE); |
Roel Kluin | 079e109 | 2010-02-18 21:54:11 +0200 | [diff] [blame] | 120 | __raw_writel(reg_level, base + GPIO_INT_LEVEL); |
Paulius Zaleckas | 1df621a | 2009-03-26 10:06:27 +0200 | [diff] [blame] | 121 | __raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE); |
| 122 | |
| 123 | gpio_ack_irq(irq); |
| 124 | |
| 125 | return 0; |
| 126 | } |
| 127 | |
| 128 | static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) |
| 129 | { |
| 130 | unsigned int gpio_irq_no, irq_stat; |
| 131 | unsigned int port = (unsigned int)get_irq_data(irq); |
| 132 | |
| 133 | irq_stat = __raw_readl(GPIO_BASE(port) + GPIO_INT_STAT); |
| 134 | |
| 135 | gpio_irq_no = GPIO_IRQ_BASE + port * 32; |
| 136 | for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) { |
| 137 | |
| 138 | if ((irq_stat & 1) == 0) |
| 139 | continue; |
| 140 | |
| 141 | BUG_ON(!(irq_desc[gpio_irq_no].handle_irq)); |
| 142 | irq_desc[gpio_irq_no].handle_irq(gpio_irq_no, |
| 143 | &irq_desc[gpio_irq_no]); |
| 144 | } |
| 145 | } |
| 146 | |
| 147 | static struct irq_chip gpio_irq_chip = { |
| 148 | .name = "GPIO", |
| 149 | .ack = gpio_ack_irq, |
| 150 | .mask = gpio_mask_irq, |
| 151 | .unmask = gpio_unmask_irq, |
| 152 | .set_type = gpio_set_irq_type, |
| 153 | }; |
| 154 | |
| 155 | static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset, |
| 156 | int dir) |
| 157 | { |
| 158 | unsigned int base = GPIO_BASE(offset / 32); |
| 159 | unsigned int reg; |
| 160 | |
| 161 | reg = __raw_readl(base + GPIO_DIR); |
| 162 | if (dir) |
| 163 | reg |= 1 << (offset % 32); |
| 164 | else |
| 165 | reg &= ~(1 << (offset % 32)); |
| 166 | __raw_writel(reg, base + GPIO_DIR); |
| 167 | } |
| 168 | |
| 169 | static void gemini_gpio_set(struct gpio_chip *chip, unsigned offset, int value) |
| 170 | { |
| 171 | unsigned int base = GPIO_BASE(offset / 32); |
| 172 | |
| 173 | if (value) |
| 174 | __raw_writel(1 << (offset % 32), base + GPIO_DATA_SET); |
| 175 | else |
| 176 | __raw_writel(1 << (offset % 32), base + GPIO_DATA_CLR); |
| 177 | } |
| 178 | |
| 179 | static int gemini_gpio_get(struct gpio_chip *chip, unsigned offset) |
| 180 | { |
| 181 | unsigned int base = GPIO_BASE(offset / 32); |
| 182 | |
| 183 | return (__raw_readl(base + GPIO_DATA_IN) >> (offset % 32)) & 1; |
| 184 | } |
| 185 | |
| 186 | static int gemini_gpio_direction_input(struct gpio_chip *chip, unsigned offset) |
| 187 | { |
| 188 | _set_gpio_direction(chip, offset, 0); |
| 189 | return 0; |
| 190 | } |
| 191 | |
| 192 | static int gemini_gpio_direction_output(struct gpio_chip *chip, unsigned offset, |
| 193 | int value) |
| 194 | { |
| 195 | _set_gpio_direction(chip, offset, 1); |
| 196 | gemini_gpio_set(chip, offset, value); |
| 197 | return 0; |
| 198 | } |
| 199 | |
| 200 | static struct gpio_chip gemini_gpio_chip = { |
| 201 | .label = "Gemini", |
| 202 | .direction_input = gemini_gpio_direction_input, |
| 203 | .get = gemini_gpio_get, |
| 204 | .direction_output = gemini_gpio_direction_output, |
| 205 | .set = gemini_gpio_set, |
| 206 | .base = 0, |
| 207 | .ngpio = GPIO_PORT_NUM * 32, |
| 208 | }; |
| 209 | |
| 210 | void __init gemini_gpio_init(void) |
| 211 | { |
| 212 | int i, j; |
| 213 | |
| 214 | for (i = 0; i < GPIO_PORT_NUM; i++) { |
| 215 | /* disable, unmask and clear all interrupts */ |
| 216 | __raw_writel(0x0, GPIO_BASE(i) + GPIO_INT_EN); |
| 217 | __raw_writel(0x0, GPIO_BASE(i) + GPIO_INT_MASK); |
| 218 | __raw_writel(~0x0, GPIO_BASE(i) + GPIO_INT_CLR); |
| 219 | |
| 220 | for (j = GPIO_IRQ_BASE + i * 32; |
| 221 | j < GPIO_IRQ_BASE + (i + 1) * 32; j++) { |
| 222 | set_irq_chip(j, &gpio_irq_chip); |
| 223 | set_irq_handler(j, handle_edge_irq); |
| 224 | set_irq_flags(j, IRQF_VALID); |
| 225 | } |
| 226 | |
| 227 | set_irq_chained_handler(IRQ_GPIO(i), gpio_irq_handler); |
| 228 | set_irq_data(IRQ_GPIO(i), (void *)i); |
| 229 | } |
| 230 | |
| 231 | BUG_ON(gpiochip_add(&gemini_gpio_chip)); |
| 232 | } |