blob: cbb5a471eb9d05c39b15ea1ab6c87fa1e4ee7464 [file] [log] [blame]
Abhilash Kesavan155bf482010-07-13 13:23:05 +09001/*
2 * Copyright (c) 2010 Samsung Electronics Co., Ltd.
3 * http://www.samsung.com
4 *
5 * PATA driver for Samsung SoCs.
6 * Supports CF Interface in True IDE mode. Currently only PIO mode has been
7 * implemented; UDMA support has to be added.
8 *
9 * Based on:
10 * PATA driver for AT91SAM9260 Static Memory Controller
11 * PATA driver for Toshiba SCC controller
12 *
13 * This program is free software; you can redistribute it and/or modify it
14 * under the terms of the GNU General Public License version 2
15 * as published by the Free Software Foundation.
16*/
17
18#include <linux/kernel.h>
19#include <linux/module.h>
20#include <linux/init.h>
21#include <linux/clk.h>
22#include <linux/libata.h>
23#include <linux/platform_device.h>
24#include <linux/slab.h>
25
Arnd Bergmann436d42c2012-08-24 15:22:12 +020026#include <linux/platform_data/ata-samsung_cf.h>
Abhilash Kesavan155bf482010-07-13 13:23:05 +090027
28#define DRV_NAME "pata_samsung_cf"
29#define DRV_VERSION "0.1"
30
Sachin Kamat15e53182014-01-02 08:39:31 +053031#define S3C_CFATA_REG(x) (x)
32#define S3C_CFATA_MUX S3C_CFATA_REG(0x0)
33#define S3C_ATA_CTRL S3C_CFATA_REG(0x0)
Sachin Kamat15e53182014-01-02 08:39:31 +053034#define S3C_ATA_CMD S3C_CFATA_REG(0x8)
Sachin Kamat15e53182014-01-02 08:39:31 +053035#define S3C_ATA_IRQ S3C_CFATA_REG(0x10)
36#define S3C_ATA_IRQ_MSK S3C_CFATA_REG(0x14)
37#define S3C_ATA_CFG S3C_CFATA_REG(0x18)
38
Sachin Kamat15e53182014-01-02 08:39:31 +053039#define S3C_ATA_PIO_TIME S3C_CFATA_REG(0x2c)
Sachin Kamat15e53182014-01-02 08:39:31 +053040#define S3C_ATA_PIO_DTR S3C_CFATA_REG(0x54)
41#define S3C_ATA_PIO_FED S3C_CFATA_REG(0x58)
42#define S3C_ATA_PIO_SCR S3C_CFATA_REG(0x5c)
43#define S3C_ATA_PIO_LLR S3C_CFATA_REG(0x60)
44#define S3C_ATA_PIO_LMR S3C_CFATA_REG(0x64)
45#define S3C_ATA_PIO_LHR S3C_CFATA_REG(0x68)
46#define S3C_ATA_PIO_DVR S3C_CFATA_REG(0x6c)
47#define S3C_ATA_PIO_CSD S3C_CFATA_REG(0x70)
48#define S3C_ATA_PIO_DAD S3C_CFATA_REG(0x74)
Sachin Kamat15e53182014-01-02 08:39:31 +053049#define S3C_ATA_PIO_RDATA S3C_CFATA_REG(0x7c)
50
51#define S3C_CFATA_MUX_TRUEIDE 0x01
52#define S3C_ATA_CFG_SWAP 0x40
53#define S3C_ATA_CFG_IORDYEN 0x02
54
Abhilash Kesavan155bf482010-07-13 13:23:05 +090055enum s3c_cpu_type {
56 TYPE_S3C64XX,
Abhilash Kesavan155bf482010-07-13 13:23:05 +090057 TYPE_S5PV210,
58};
59
60/*
61 * struct s3c_ide_info - S3C PATA instance.
62 * @clk: The clock resource for this controller.
63 * @ide_addr: The area mapped for the hardware registers.
64 * @sfr_addr: The area mapped for the special function registers.
65 * @irq: The IRQ number we are using.
66 * @cpu_type: The exact type of this controller.
67 * @fifo_status_reg: The ATA_FIFO_STATUS register offset.
68 */
69struct s3c_ide_info {
70 struct clk *clk;
71 void __iomem *ide_addr;
72 void __iomem *sfr_addr;
73 unsigned int irq;
74 enum s3c_cpu_type cpu_type;
75 unsigned int fifo_status_reg;
76};
77
78static void pata_s3c_set_endian(void __iomem *s3c_ide_regbase, u8 mode)
79{
80 u32 reg = readl(s3c_ide_regbase + S3C_ATA_CFG);
81 reg = mode ? (reg & ~S3C_ATA_CFG_SWAP) : (reg | S3C_ATA_CFG_SWAP);
82 writel(reg, s3c_ide_regbase + S3C_ATA_CFG);
83}
84
85static void pata_s3c_cfg_mode(void __iomem *s3c_ide_sfrbase)
86{
87 /* Select true-ide as the internal operating mode */
88 writel(readl(s3c_ide_sfrbase + S3C_CFATA_MUX) | S3C_CFATA_MUX_TRUEIDE,
89 s3c_ide_sfrbase + S3C_CFATA_MUX);
90}
91
92static unsigned long
93pata_s3c_setup_timing(struct s3c_ide_info *info, const struct ata_timing *ata)
94{
95 int t1 = ata->setup;
96 int t2 = ata->act8b;
97 int t2i = ata->rec8b;
98 ulong piotime;
99
100 piotime = ((t2i & 0xff) << 12) | ((t2 & 0xff) << 4) | (t1 & 0xf);
101
102 return piotime;
103}
104
105static void pata_s3c_set_piomode(struct ata_port *ap, struct ata_device *adev)
106{
107 struct s3c_ide_info *info = ap->host->private_data;
108 struct ata_timing timing;
109 int cycle_time;
110 ulong ata_cfg = readl(info->ide_addr + S3C_ATA_CFG);
111 ulong piotime;
112
113 /* Enables IORDY if mode requires it */
114 if (ata_pio_need_iordy(adev))
115 ata_cfg |= S3C_ATA_CFG_IORDYEN;
116 else
117 ata_cfg &= ~S3C_ATA_CFG_IORDYEN;
118
119 cycle_time = (int)(1000000000UL / clk_get_rate(info->clk));
120
121 ata_timing_compute(adev, adev->pio_mode, &timing,
122 cycle_time * 1000, 0);
123
124 piotime = pata_s3c_setup_timing(info, &timing);
125
126 writel(ata_cfg, info->ide_addr + S3C_ATA_CFG);
127 writel(piotime, info->ide_addr + S3C_ATA_PIO_TIME);
128}
129
130/*
131 * Waits until the IDE controller is able to perform next read/write
132 * operation to the disk. Needed for 64XX series boards only.
133 */
134static int wait_for_host_ready(struct s3c_ide_info *info)
135{
136 ulong timeout;
137 void __iomem *fifo_reg = info->ide_addr + info->fifo_status_reg;
138
139 /* wait for maximum of 20 msec */
140 timeout = jiffies + msecs_to_jiffies(20);
141 while (time_before(jiffies, timeout)) {
142 if ((readl(fifo_reg) >> 28) == 0)
143 return 0;
144 }
145 return -EBUSY;
146}
147
148/*
149 * Writes to one of the task file registers.
150 */
151static void ata_outb(struct ata_host *host, u8 addr, void __iomem *reg)
152{
153 struct s3c_ide_info *info = host->private_data;
154
155 wait_for_host_ready(info);
156 writeb(addr, reg);
157}
158
159/*
160 * Reads from one of the task file registers.
161 */
162static u8 ata_inb(struct ata_host *host, void __iomem *reg)
163{
164 struct s3c_ide_info *info = host->private_data;
165 u8 temp;
166
167 wait_for_host_ready(info);
168 (void) readb(reg);
169 wait_for_host_ready(info);
170 temp = readb(info->ide_addr + S3C_ATA_PIO_RDATA);
171 return temp;
172}
173
174/*
175 * pata_s3c_tf_load - send taskfile registers to host controller
176 */
177static void pata_s3c_tf_load(struct ata_port *ap,
178 const struct ata_taskfile *tf)
179{
180 struct ata_ioports *ioaddr = &ap->ioaddr;
181 unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
182
183 if (tf->ctl != ap->last_ctl) {
184 ata_outb(ap->host, tf->ctl, ioaddr->ctl_addr);
185 ap->last_ctl = tf->ctl;
186 ata_wait_idle(ap);
187 }
188
189 if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
190 ata_outb(ap->host, tf->hob_feature, ioaddr->feature_addr);
191 ata_outb(ap->host, tf->hob_nsect, ioaddr->nsect_addr);
192 ata_outb(ap->host, tf->hob_lbal, ioaddr->lbal_addr);
193 ata_outb(ap->host, tf->hob_lbam, ioaddr->lbam_addr);
194 ata_outb(ap->host, tf->hob_lbah, ioaddr->lbah_addr);
195 }
196
197 if (is_addr) {
198 ata_outb(ap->host, tf->feature, ioaddr->feature_addr);
199 ata_outb(ap->host, tf->nsect, ioaddr->nsect_addr);
200 ata_outb(ap->host, tf->lbal, ioaddr->lbal_addr);
201 ata_outb(ap->host, tf->lbam, ioaddr->lbam_addr);
202 ata_outb(ap->host, tf->lbah, ioaddr->lbah_addr);
203 }
204
205 if (tf->flags & ATA_TFLAG_DEVICE)
206 ata_outb(ap->host, tf->device, ioaddr->device_addr);
207
208 ata_wait_idle(ap);
209}
210
211/*
212 * pata_s3c_tf_read - input device's ATA taskfile shadow registers
213 */
214static void pata_s3c_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
215{
216 struct ata_ioports *ioaddr = &ap->ioaddr;
217
218 tf->feature = ata_inb(ap->host, ioaddr->error_addr);
219 tf->nsect = ata_inb(ap->host, ioaddr->nsect_addr);
220 tf->lbal = ata_inb(ap->host, ioaddr->lbal_addr);
221 tf->lbam = ata_inb(ap->host, ioaddr->lbam_addr);
222 tf->lbah = ata_inb(ap->host, ioaddr->lbah_addr);
223 tf->device = ata_inb(ap->host, ioaddr->device_addr);
224
225 if (tf->flags & ATA_TFLAG_LBA48) {
226 ata_outb(ap->host, tf->ctl | ATA_HOB, ioaddr->ctl_addr);
227 tf->hob_feature = ata_inb(ap->host, ioaddr->error_addr);
228 tf->hob_nsect = ata_inb(ap->host, ioaddr->nsect_addr);
229 tf->hob_lbal = ata_inb(ap->host, ioaddr->lbal_addr);
230 tf->hob_lbam = ata_inb(ap->host, ioaddr->lbam_addr);
231 tf->hob_lbah = ata_inb(ap->host, ioaddr->lbah_addr);
232 ata_outb(ap->host, tf->ctl, ioaddr->ctl_addr);
233 ap->last_ctl = tf->ctl;
234 }
235}
236
237/*
238 * pata_s3c_exec_command - issue ATA command to host controller
239 */
240static void pata_s3c_exec_command(struct ata_port *ap,
241 const struct ata_taskfile *tf)
242{
243 ata_outb(ap->host, tf->command, ap->ioaddr.command_addr);
244 ata_sff_pause(ap);
245}
246
247/*
248 * pata_s3c_check_status - Read device status register
249 */
250static u8 pata_s3c_check_status(struct ata_port *ap)
251{
252 return ata_inb(ap->host, ap->ioaddr.status_addr);
253}
254
255/*
256 * pata_s3c_check_altstatus - Read alternate device status register
257 */
258static u8 pata_s3c_check_altstatus(struct ata_port *ap)
259{
260 return ata_inb(ap->host, ap->ioaddr.altstatus_addr);
261}
262
263/*
264 * pata_s3c_data_xfer - Transfer data by PIO
265 */
Jingoo Han3d70a362013-08-09 14:24:35 +0900266static unsigned int pata_s3c_data_xfer(struct ata_device *dev,
267 unsigned char *buf, unsigned int buflen, int rw)
Abhilash Kesavan155bf482010-07-13 13:23:05 +0900268{
269 struct ata_port *ap = dev->link->ap;
270 struct s3c_ide_info *info = ap->host->private_data;
271 void __iomem *data_addr = ap->ioaddr.data_addr;
272 unsigned int words = buflen >> 1, i;
273 u16 *data_ptr = (u16 *)buf;
274
275 /* Requires wait same as in ata_inb/ata_outb */
276 if (rw == READ)
277 for (i = 0; i < words; i++, data_ptr++) {
278 wait_for_host_ready(info);
279 (void) readw(data_addr);
280 wait_for_host_ready(info);
281 *data_ptr = readw(info->ide_addr
282 + S3C_ATA_PIO_RDATA);
283 }
284 else
285 for (i = 0; i < words; i++, data_ptr++) {
286 wait_for_host_ready(info);
287 writew(*data_ptr, data_addr);
288 }
289
290 if (buflen & 0x01)
291 dev_err(ap->dev, "unexpected trailing data\n");
292
293 return words << 1;
294}
295
296/*
297 * pata_s3c_dev_select - Select device on ATA bus
298 */
299static void pata_s3c_dev_select(struct ata_port *ap, unsigned int device)
300{
301 u8 tmp = ATA_DEVICE_OBS;
302
303 if (device != 0)
304 tmp |= ATA_DEV1;
305
306 ata_outb(ap->host, tmp, ap->ioaddr.device_addr);
307 ata_sff_pause(ap);
308}
309
310/*
311 * pata_s3c_devchk - PATA device presence detection
312 */
313static unsigned int pata_s3c_devchk(struct ata_port *ap,
314 unsigned int device)
315{
316 struct ata_ioports *ioaddr = &ap->ioaddr;
317 u8 nsect, lbal;
318
319 pata_s3c_dev_select(ap, device);
320
321 ata_outb(ap->host, 0x55, ioaddr->nsect_addr);
322 ata_outb(ap->host, 0xaa, ioaddr->lbal_addr);
323
324 ata_outb(ap->host, 0xaa, ioaddr->nsect_addr);
325 ata_outb(ap->host, 0x55, ioaddr->lbal_addr);
326
327 ata_outb(ap->host, 0x55, ioaddr->nsect_addr);
328 ata_outb(ap->host, 0xaa, ioaddr->lbal_addr);
329
330 nsect = ata_inb(ap->host, ioaddr->nsect_addr);
331 lbal = ata_inb(ap->host, ioaddr->lbal_addr);
332
333 if ((nsect == 0x55) && (lbal == 0xaa))
334 return 1; /* we found a device */
335
336 return 0; /* nothing found */
337}
338
339/*
340 * pata_s3c_wait_after_reset - wait for devices to become ready after reset
341 */
342static int pata_s3c_wait_after_reset(struct ata_link *link,
343 unsigned long deadline)
344{
345 int rc;
346
Tejun Heo97750ce2010-09-06 17:56:29 +0200347 ata_msleep(link->ap, ATA_WAIT_AFTER_RESET);
Abhilash Kesavan155bf482010-07-13 13:23:05 +0900348
349 /* always check readiness of the master device */
350 rc = ata_sff_wait_ready(link, deadline);
351 /* -ENODEV means the odd clown forgot the D7 pulldown resistor
352 * and TF status is 0xff, bail out on it too.
353 */
354 if (rc)
355 return rc;
356
357 return 0;
358}
359
360/*
361 * pata_s3c_bus_softreset - PATA device software reset
362 */
Arjun Sreedharanb741e8d2014-08-16 18:38:34 +0530363static int pata_s3c_bus_softreset(struct ata_port *ap,
Abhilash Kesavan155bf482010-07-13 13:23:05 +0900364 unsigned long deadline)
365{
366 struct ata_ioports *ioaddr = &ap->ioaddr;
367
368 /* software reset. causes dev0 to be selected */
369 ata_outb(ap->host, ap->ctl, ioaddr->ctl_addr);
370 udelay(20);
371 ata_outb(ap->host, ap->ctl | ATA_SRST, ioaddr->ctl_addr);
372 udelay(20);
373 ata_outb(ap->host, ap->ctl, ioaddr->ctl_addr);
374 ap->last_ctl = ap->ctl;
375
376 return pata_s3c_wait_after_reset(&ap->link, deadline);
377}
378
379/*
380 * pata_s3c_softreset - reset host port via ATA SRST
381 */
382static int pata_s3c_softreset(struct ata_link *link, unsigned int *classes,
383 unsigned long deadline)
384{
385 struct ata_port *ap = link->ap;
386 unsigned int devmask = 0;
387 int rc;
388 u8 err;
389
390 /* determine if device 0 is present */
391 if (pata_s3c_devchk(ap, 0))
392 devmask |= (1 << 0);
393
394 /* select device 0 again */
395 pata_s3c_dev_select(ap, 0);
396
397 /* issue bus reset */
398 rc = pata_s3c_bus_softreset(ap, deadline);
399 /* if link is occupied, -ENODEV too is an error */
400 if (rc && rc != -ENODEV) {
Joe Perchesa9a79df2011-04-15 15:51:59 -0700401 ata_link_err(link, "SRST failed (errno=%d)\n", rc);
Abhilash Kesavan155bf482010-07-13 13:23:05 +0900402 return rc;
403 }
404
405 /* determine by signature whether we have ATA or ATAPI devices */
406 classes[0] = ata_sff_dev_classify(&ap->link.device[0],
407 devmask & (1 << 0), &err);
408
409 return 0;
410}
411
412/*
413 * pata_s3c_set_devctl - Write device control register
414 */
415static void pata_s3c_set_devctl(struct ata_port *ap, u8 ctl)
416{
417 ata_outb(ap->host, ctl, ap->ioaddr.ctl_addr);
418}
419
420static struct scsi_host_template pata_s3c_sht = {
421 ATA_PIO_SHT(DRV_NAME),
422};
423
424static struct ata_port_operations pata_s3c_port_ops = {
425 .inherits = &ata_sff_port_ops,
426 .sff_check_status = pata_s3c_check_status,
427 .sff_check_altstatus = pata_s3c_check_altstatus,
428 .sff_tf_load = pata_s3c_tf_load,
429 .sff_tf_read = pata_s3c_tf_read,
430 .sff_data_xfer = pata_s3c_data_xfer,
431 .sff_exec_command = pata_s3c_exec_command,
432 .sff_dev_select = pata_s3c_dev_select,
433 .sff_set_devctl = pata_s3c_set_devctl,
434 .softreset = pata_s3c_softreset,
435 .set_piomode = pata_s3c_set_piomode,
436};
437
438static struct ata_port_operations pata_s5p_port_ops = {
439 .inherits = &ata_sff_port_ops,
440 .set_piomode = pata_s3c_set_piomode,
441};
442
Jingoo Han3d70a362013-08-09 14:24:35 +0900443static void pata_s3c_enable(void __iomem *s3c_ide_regbase, bool state)
Abhilash Kesavan155bf482010-07-13 13:23:05 +0900444{
445 u32 temp = readl(s3c_ide_regbase + S3C_ATA_CTRL);
446 temp = state ? (temp | 1) : (temp & ~1);
447 writel(temp, s3c_ide_regbase + S3C_ATA_CTRL);
448}
449
450static irqreturn_t pata_s3c_irq(int irq, void *dev_instance)
451{
452 struct ata_host *host = dev_instance;
453 struct s3c_ide_info *info = host->private_data;
454 u32 reg;
455
456 reg = readl(info->ide_addr + S3C_ATA_IRQ);
457 writel(reg, info->ide_addr + S3C_ATA_IRQ);
458
459 return ata_sff_interrupt(irq, dev_instance);
460}
461
462static void pata_s3c_hwinit(struct s3c_ide_info *info,
463 struct s3c_ide_platdata *pdata)
464{
465 switch (info->cpu_type) {
466 case TYPE_S3C64XX:
467 /* Configure as big endian */
468 pata_s3c_cfg_mode(info->sfr_addr);
469 pata_s3c_set_endian(info->ide_addr, 1);
470 pata_s3c_enable(info->ide_addr, true);
471 msleep(100);
472
473 /* Remove IRQ Status */
474 writel(0x1f, info->ide_addr + S3C_ATA_IRQ);
475 writel(0x1b, info->ide_addr + S3C_ATA_IRQ_MSK);
476 break;
477
Abhilash Kesavan155bf482010-07-13 13:23:05 +0900478 case TYPE_S5PV210:
479 /* Configure as little endian */
480 pata_s3c_set_endian(info->ide_addr, 0);
481 pata_s3c_enable(info->ide_addr, true);
482 msleep(100);
483
484 /* Remove IRQ Status */
485 writel(0x3f, info->ide_addr + S3C_ATA_IRQ);
486 writel(0x3f, info->ide_addr + S3C_ATA_IRQ_MSK);
487 break;
488
489 default:
490 BUG();
491 }
492}
493
494static int __init pata_s3c_probe(struct platform_device *pdev)
495{
Jingoo Han61b8c342013-07-30 17:16:05 +0900496 struct s3c_ide_platdata *pdata = dev_get_platdata(&pdev->dev);
Abhilash Kesavan155bf482010-07-13 13:23:05 +0900497 struct device *dev = &pdev->dev;
498 struct s3c_ide_info *info;
499 struct resource *res;
500 struct ata_port *ap;
501 struct ata_host *host;
502 enum s3c_cpu_type cpu_type;
503 int ret;
504
505 cpu_type = platform_get_device_id(pdev)->driver_data;
506
507 info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
508 if (!info) {
509 dev_err(dev, "failed to allocate memory for device data\n");
510 return -ENOMEM;
511 }
512
513 info->irq = platform_get_irq(pdev, 0);
514
515 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
Abhilash Kesavan155bf482010-07-13 13:23:05 +0900516
Jingoo Han3e692a92014-01-02 17:24:03 +0900517 info->ide_addr = devm_ioremap_resource(dev, res);
518 if (IS_ERR(info->ide_addr))
519 return PTR_ERR(info->ide_addr);
Abhilash Kesavan155bf482010-07-13 13:23:05 +0900520
Jingoo Han25effc32013-01-10 11:05:06 +0900521 info->clk = devm_clk_get(&pdev->dev, "cfcon");
Abhilash Kesavan155bf482010-07-13 13:23:05 +0900522 if (IS_ERR(info->clk)) {
523 dev_err(dev, "failed to get access to cf controller clock\n");
524 ret = PTR_ERR(info->clk);
525 info->clk = NULL;
526 return ret;
527 }
528
529 clk_enable(info->clk);
530
531 /* init ata host */
532 host = ata_host_alloc(dev, 1);
533 if (!host) {
534 dev_err(dev, "failed to allocate ide host\n");
535 ret = -ENOMEM;
536 goto stop_clk;
537 }
538
539 ap = host->ports[0];
Abhilash Kesavan155bf482010-07-13 13:23:05 +0900540 ap->pio_mask = ATA_PIO4;
541
542 if (cpu_type == TYPE_S3C64XX) {
543 ap->ops = &pata_s3c_port_ops;
544 info->sfr_addr = info->ide_addr + 0x1800;
545 info->ide_addr += 0x1900;
546 info->fifo_status_reg = 0x94;
Abhilash Kesavan155bf482010-07-13 13:23:05 +0900547 } else {
548 ap->ops = &pata_s5p_port_ops;
549 info->fifo_status_reg = 0x84;
550 }
551
552 info->cpu_type = cpu_type;
553
554 if (info->irq <= 0) {
555 ap->flags |= ATA_FLAG_PIO_POLLING;
556 info->irq = 0;
557 ata_port_desc(ap, "no IRQ, using PIO polling\n");
558 }
559
560 ap->ioaddr.cmd_addr = info->ide_addr + S3C_ATA_CMD;
561 ap->ioaddr.data_addr = info->ide_addr + S3C_ATA_PIO_DTR;
562 ap->ioaddr.error_addr = info->ide_addr + S3C_ATA_PIO_FED;
563 ap->ioaddr.feature_addr = info->ide_addr + S3C_ATA_PIO_FED;
564 ap->ioaddr.nsect_addr = info->ide_addr + S3C_ATA_PIO_SCR;
565 ap->ioaddr.lbal_addr = info->ide_addr + S3C_ATA_PIO_LLR;
566 ap->ioaddr.lbam_addr = info->ide_addr + S3C_ATA_PIO_LMR;
567 ap->ioaddr.lbah_addr = info->ide_addr + S3C_ATA_PIO_LHR;
568 ap->ioaddr.device_addr = info->ide_addr + S3C_ATA_PIO_DVR;
569 ap->ioaddr.status_addr = info->ide_addr + S3C_ATA_PIO_CSD;
570 ap->ioaddr.command_addr = info->ide_addr + S3C_ATA_PIO_CSD;
571 ap->ioaddr.altstatus_addr = info->ide_addr + S3C_ATA_PIO_DAD;
572 ap->ioaddr.ctl_addr = info->ide_addr + S3C_ATA_PIO_DAD;
573
574 ata_port_desc(ap, "mmio cmd 0x%llx ",
575 (unsigned long long)res->start);
576
577 host->private_data = info;
578
579 if (pdata && pdata->setup_gpio)
580 pdata->setup_gpio();
581
582 /* Set endianness and enable the interface */
583 pata_s3c_hwinit(info, pdata);
584
585 platform_set_drvdata(pdev, host);
586
Bartlomiej Zolnierkiewicz3608aef2014-03-31 19:52:44 +0200587 ret = ata_host_activate(host, info->irq,
588 info->irq ? pata_s3c_irq : NULL,
589 0, &pata_s3c_sht);
590 if (ret)
591 goto stop_clk;
592
593 return 0;
Abhilash Kesavan155bf482010-07-13 13:23:05 +0900594
595stop_clk:
596 clk_disable(info->clk);
Abhilash Kesavan155bf482010-07-13 13:23:05 +0900597 return ret;
598}
599
600static int __exit pata_s3c_remove(struct platform_device *pdev)
601{
602 struct ata_host *host = platform_get_drvdata(pdev);
603 struct s3c_ide_info *info = host->private_data;
604
605 ata_host_detach(host);
606
607 clk_disable(info->clk);
Abhilash Kesavan155bf482010-07-13 13:23:05 +0900608
609 return 0;
610}
611
Bartlomiej Zolnierkiewicz58eb8cd2014-05-07 17:17:44 +0200612#ifdef CONFIG_PM_SLEEP
Abhilash Kesavan155bf482010-07-13 13:23:05 +0900613static int pata_s3c_suspend(struct device *dev)
614{
615 struct platform_device *pdev = to_platform_device(dev);
616 struct ata_host *host = platform_get_drvdata(pdev);
617
618 return ata_host_suspend(host, PMSG_SUSPEND);
619}
620
621static int pata_s3c_resume(struct device *dev)
622{
623 struct platform_device *pdev = to_platform_device(dev);
624 struct ata_host *host = platform_get_drvdata(pdev);
Jingoo Han61b8c342013-07-30 17:16:05 +0900625 struct s3c_ide_platdata *pdata = dev_get_platdata(&pdev->dev);
Abhilash Kesavan155bf482010-07-13 13:23:05 +0900626 struct s3c_ide_info *info = host->private_data;
627
628 pata_s3c_hwinit(info, pdata);
629 ata_host_resume(host);
630
631 return 0;
632}
633
634static const struct dev_pm_ops pata_s3c_pm_ops = {
635 .suspend = pata_s3c_suspend,
636 .resume = pata_s3c_resume,
637};
638#endif
639
640/* driver device registration */
Krzysztof Kozlowski3b6eefc2015-05-02 00:59:16 +0900641static const struct platform_device_id pata_s3c_driver_ids[] = {
Abhilash Kesavan155bf482010-07-13 13:23:05 +0900642 {
643 .name = "s3c64xx-pata",
644 .driver_data = TYPE_S3C64XX,
645 }, {
Abhilash Kesavan155bf482010-07-13 13:23:05 +0900646 .name = "s5pv210-pata",
647 .driver_data = TYPE_S5PV210,
648 },
649 { }
650};
651
652MODULE_DEVICE_TABLE(platform, pata_s3c_driver_ids);
653
654static struct platform_driver pata_s3c_driver = {
655 .remove = __exit_p(pata_s3c_remove),
656 .id_table = pata_s3c_driver_ids,
657 .driver = {
658 .name = DRV_NAME,
Bartlomiej Zolnierkiewicz58eb8cd2014-05-07 17:17:44 +0200659#ifdef CONFIG_PM_SLEEP
Abhilash Kesavan155bf482010-07-13 13:23:05 +0900660 .pm = &pata_s3c_pm_ops,
661#endif
662 },
663};
664
Jingoo Hanb186aff2013-03-04 17:34:42 +0900665module_platform_driver_probe(pata_s3c_driver, pata_s3c_probe);
Abhilash Kesavan155bf482010-07-13 13:23:05 +0900666
667MODULE_AUTHOR("Abhilash Kesavan, <a.kesavan@samsung.com>");
668MODULE_DESCRIPTION("low-level driver for Samsung PATA controller");
669MODULE_LICENSE("GPL");
670MODULE_VERSION(DRV_VERSION);