blob: befbc80d11fca4d82c4718a7cc47b580003db3b9 [file] [log] [blame]
Michael Hennerichdbcc4652010-11-24 09:33:58 +00001/*
2 * Analog Devices Blackfin(BF537 STAMP) + SHARP TFT LCD.
3 * http://docs.blackfin.uclinux.org/doku.php?id=hw:cards:tft-lcd
4 *
5 * Copyright 2006-2010 Analog Devices Inc.
6 * Licensed under the GPL-2.
7 */
8
9#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
10
11#include <linux/module.h>
12#include <linux/kernel.h>
13#include <linux/errno.h>
14#include <linux/string.h>
15#include <linux/mm.h>
16#include <linux/delay.h>
17#include <linux/fb.h>
18#include <linux/ioport.h>
19#include <linux/init.h>
20#include <linux/types.h>
21#include <linux/gpio.h>
22#include <linux/interrupt.h>
23#include <linux/sched.h>
24#include <linux/timer.h>
25#include <linux/device.h>
26#include <linux/backlight.h>
27#include <linux/lcd.h>
28#include <linux/i2c.h>
29#include <linux/spinlock.h>
30#include <linux/dma-mapping.h>
31#include <linux/slab.h>
32#include <linux/platform_device.h>
33
34#include <asm/blackfin.h>
35#include <asm/irq.h>
36#include <asm/dpmc.h>
37#include <asm/dma.h>
38#include <asm/portmux.h>
39
40#define NO_BL 1
41
42#define MAX_BRIGHENESS 95
43#define MIN_BRIGHENESS 5
44#define NBR_PALETTE 256
45
46static const unsigned short ppi_pins[] = {
47 P_PPI0_CLK, P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
48 P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
49 P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
50 P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15, 0
51};
52
53static unsigned char *fb_buffer; /* RGB Buffer */
54static unsigned long *dma_desc_table;
55static int t_conf_done, lq035_open_cnt;
56static DEFINE_SPINLOCK(bfin_lq035_lock);
57
58static int landscape;
59module_param(landscape, int, 0);
60MODULE_PARM_DESC(landscape,
61 "LANDSCAPE use 320x240 instead of Native 240x320 Resolution");
62
63static int bgr;
64module_param(bgr, int, 0);
65MODULE_PARM_DESC(bgr,
66 "BGR use 16-bit BGR-565 instead of RGB-565");
67
68static int nocursor = 1;
69module_param(nocursor, int, 0644);
70MODULE_PARM_DESC(nocursor, "cursor enable/disable");
71
72static unsigned long current_brightness; /* backlight */
73
74/* AD5280 vcomm */
75static unsigned char vcomm_value = 150;
76static struct i2c_client *ad5280_client;
77
78static void set_vcomm(void)
79{
80 int nr;
81
82 if (!ad5280_client)
83 return;
84
85 nr = i2c_smbus_write_byte_data(ad5280_client, 0x00, vcomm_value);
86 if (nr)
87 pr_err("i2c_smbus_write_byte_data fail: %d\n", nr);
88}
89
90static int __devinit ad5280_probe(struct i2c_client *client,
91 const struct i2c_device_id *id)
92{
93 int ret;
94 if (!i2c_check_functionality(client->adapter,
95 I2C_FUNC_SMBUS_BYTE_DATA)) {
96 dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
97 return -EIO;
98 }
99
100 ret = i2c_smbus_write_byte_data(client, 0x00, vcomm_value);
101 if (ret) {
102 dev_err(&client->dev, "write fail: %d\n", ret);
103 return ret;
104 }
105
106 ad5280_client = client;
107
108 return 0;
109}
110
111static int __devexit ad5280_remove(struct i2c_client *client)
112{
113 ad5280_client = NULL;
114 return 0;
115}
116
117static const struct i2c_device_id ad5280_id[] = {
118 {"bf537-lq035-ad5280", 0},
119 {}
120};
121
122MODULE_DEVICE_TABLE(i2c, ad5280_id);
123
124static struct i2c_driver ad5280_driver = {
125 .driver = {
126 .name = "bf537-lq035-ad5280",
127 },
128 .probe = ad5280_probe,
129 .remove = __devexit_p(ad5280_remove),
130 .id_table = ad5280_id,
131};
132
133#ifdef CONFIG_PNAV10
134#define MOD GPIO_PH13
135
136#define bfin_write_TIMER_LP_CONFIG bfin_write_TIMER0_CONFIG
137#define bfin_write_TIMER_LP_WIDTH bfin_write_TIMER0_WIDTH
138#define bfin_write_TIMER_LP_PERIOD bfin_write_TIMER0_PERIOD
139#define bfin_read_TIMER_LP_COUNTER bfin_read_TIMER0_COUNTER
140#define TIMDIS_LP TIMDIS0
141#define TIMEN_LP TIMEN0
142
143#define bfin_write_TIMER_SPS_CONFIG bfin_write_TIMER1_CONFIG
144#define bfin_write_TIMER_SPS_WIDTH bfin_write_TIMER1_WIDTH
145#define bfin_write_TIMER_SPS_PERIOD bfin_write_TIMER1_PERIOD
146#define TIMDIS_SPS TIMDIS1
147#define TIMEN_SPS TIMEN1
148
149#define bfin_write_TIMER_SP_CONFIG bfin_write_TIMER5_CONFIG
150#define bfin_write_TIMER_SP_WIDTH bfin_write_TIMER5_WIDTH
151#define bfin_write_TIMER_SP_PERIOD bfin_write_TIMER5_PERIOD
152#define TIMDIS_SP TIMDIS5
153#define TIMEN_SP TIMEN5
154
155#define bfin_write_TIMER_PS_CLS_CONFIG bfin_write_TIMER2_CONFIG
156#define bfin_write_TIMER_PS_CLS_WIDTH bfin_write_TIMER2_WIDTH
157#define bfin_write_TIMER_PS_CLS_PERIOD bfin_write_TIMER2_PERIOD
158#define TIMDIS_PS_CLS TIMDIS2
159#define TIMEN_PS_CLS TIMEN2
160
161#define bfin_write_TIMER_REV_CONFIG bfin_write_TIMER3_CONFIG
162#define bfin_write_TIMER_REV_WIDTH bfin_write_TIMER3_WIDTH
163#define bfin_write_TIMER_REV_PERIOD bfin_write_TIMER3_PERIOD
164#define TIMDIS_REV TIMDIS3
165#define TIMEN_REV TIMEN3
166#define bfin_read_TIMER_REV_COUNTER bfin_read_TIMER3_COUNTER
167
168#define FREQ_PPI_CLK (5*1024*1024) /* PPI_CLK 5MHz */
169
170#define TIMERS {P_TMR0, P_TMR1, P_TMR2, P_TMR3, P_TMR5, 0}
171
172#else
173
174#define UD GPIO_PF13 /* Up / Down */
175#define MOD GPIO_PF10
176#define LBR GPIO_PF14 /* Left Right */
177
178#define bfin_write_TIMER_LP_CONFIG bfin_write_TIMER6_CONFIG
179#define bfin_write_TIMER_LP_WIDTH bfin_write_TIMER6_WIDTH
180#define bfin_write_TIMER_LP_PERIOD bfin_write_TIMER6_PERIOD
181#define bfin_read_TIMER_LP_COUNTER bfin_read_TIMER6_COUNTER
182#define TIMDIS_LP TIMDIS6
183#define TIMEN_LP TIMEN6
184
185#define bfin_write_TIMER_SPS_CONFIG bfin_write_TIMER1_CONFIG
186#define bfin_write_TIMER_SPS_WIDTH bfin_write_TIMER1_WIDTH
187#define bfin_write_TIMER_SPS_PERIOD bfin_write_TIMER1_PERIOD
188#define TIMDIS_SPS TIMDIS1
189#define TIMEN_SPS TIMEN1
190
191#define bfin_write_TIMER_SP_CONFIG bfin_write_TIMER0_CONFIG
192#define bfin_write_TIMER_SP_WIDTH bfin_write_TIMER0_WIDTH
193#define bfin_write_TIMER_SP_PERIOD bfin_write_TIMER0_PERIOD
194#define TIMDIS_SP TIMDIS0
195#define TIMEN_SP TIMEN0
196
197#define bfin_write_TIMER_PS_CLS_CONFIG bfin_write_TIMER7_CONFIG
198#define bfin_write_TIMER_PS_CLS_WIDTH bfin_write_TIMER7_WIDTH
199#define bfin_write_TIMER_PS_CLS_PERIOD bfin_write_TIMER7_PERIOD
200#define TIMDIS_PS_CLS TIMDIS7
201#define TIMEN_PS_CLS TIMEN7
202
203#define bfin_write_TIMER_REV_CONFIG bfin_write_TIMER5_CONFIG
204#define bfin_write_TIMER_REV_WIDTH bfin_write_TIMER5_WIDTH
205#define bfin_write_TIMER_REV_PERIOD bfin_write_TIMER5_PERIOD
206#define TIMDIS_REV TIMDIS5
207#define TIMEN_REV TIMEN5
208#define bfin_read_TIMER_REV_COUNTER bfin_read_TIMER5_COUNTER
209
210#define FREQ_PPI_CLK (6*1000*1000) /* PPI_CLK 6MHz */
211#define TIMERS {P_TMR0, P_TMR1, P_TMR5, P_TMR6, P_TMR7, 0}
212
213#endif
214
215#define LCD_X_RES 240 /* Horizontal Resolution */
216#define LCD_Y_RES 320 /* Vertical Resolution */
217
218#define LCD_BBP 16 /* Bit Per Pixel */
219
220/* the LCD and the DMA start counting differently;
221 * since one starts at 0 and the other starts at 1,
222 * we have a difference of 1 between START_LINES
223 * and U_LINES.
224 */
225#define START_LINES 8 /* lines for field flyback or field blanking signal */
226#define U_LINES 9 /* number of undisplayed blanking lines */
227
228#define FRAMES_PER_SEC (60)
229
230#define DCLKS_PER_FRAME (FREQ_PPI_CLK/FRAMES_PER_SEC)
231#define DCLKS_PER_LINE (DCLKS_PER_FRAME/(LCD_Y_RES+U_LINES))
232
233#define PPI_CONFIG_VALUE (PORT_DIR|XFR_TYPE|DLEN_16|POLS)
234#define PPI_DELAY_VALUE (0)
235#define TIMER_CONFIG (PWM_OUT|PERIOD_CNT|TIN_SEL|CLK_SEL)
236
237#define ACTIVE_VIDEO_MEM_OFFSET (LCD_X_RES*START_LINES*(LCD_BBP/8))
238#define ACTIVE_VIDEO_MEM_SIZE (LCD_Y_RES*LCD_X_RES*(LCD_BBP/8))
239#define TOTAL_VIDEO_MEM_SIZE ((LCD_Y_RES+U_LINES)*LCD_X_RES*(LCD_BBP/8))
240#define TOTAL_DMA_DESC_SIZE (2 * sizeof(u32) * (LCD_Y_RES + U_LINES))
241
242static void start_timers(void) /* CHECK with HW */
243{
244 unsigned long flags;
245
246 local_irq_save(flags);
247
248 bfin_write_TIMER_ENABLE(TIMEN_REV);
249 SSYNC();
250
251 while (bfin_read_TIMER_REV_COUNTER() <= 11)
252 continue;
253 bfin_write_TIMER_ENABLE(TIMEN_LP);
254 SSYNC();
255
256 while (bfin_read_TIMER_LP_COUNTER() < 3)
257 continue;
258 bfin_write_TIMER_ENABLE(TIMEN_SP|TIMEN_SPS|TIMEN_PS_CLS);
259 SSYNC();
260 t_conf_done = 1;
261 local_irq_restore(flags);
262}
263
264static void config_timers(void)
265{
266 /* Stop timers */
267 bfin_write_TIMER_DISABLE(TIMDIS_SP|TIMDIS_SPS|TIMDIS_REV|
268 TIMDIS_LP|TIMDIS_PS_CLS);
269 SSYNC();
270
271 /* LP, timer 6 */
272 bfin_write_TIMER_LP_CONFIG(TIMER_CONFIG|PULSE_HI);
273 bfin_write_TIMER_LP_WIDTH(1);
274
275 bfin_write_TIMER_LP_PERIOD(DCLKS_PER_LINE);
276 SSYNC();
277
278 /* SPS, timer 1 */
279 bfin_write_TIMER_SPS_CONFIG(TIMER_CONFIG|PULSE_HI);
280 bfin_write_TIMER_SPS_WIDTH(DCLKS_PER_LINE*2);
281 bfin_write_TIMER_SPS_PERIOD((DCLKS_PER_LINE * (LCD_Y_RES+U_LINES)));
282 SSYNC();
283
284 /* SP, timer 0 */
285 bfin_write_TIMER_SP_CONFIG(TIMER_CONFIG|PULSE_HI);
286 bfin_write_TIMER_SP_WIDTH(1);
287 bfin_write_TIMER_SP_PERIOD(DCLKS_PER_LINE);
288 SSYNC();
289
290 /* PS & CLS, timer 7 */
291 bfin_write_TIMER_PS_CLS_CONFIG(TIMER_CONFIG);
292 bfin_write_TIMER_PS_CLS_WIDTH(LCD_X_RES + START_LINES);
293 bfin_write_TIMER_PS_CLS_PERIOD(DCLKS_PER_LINE);
294
295 SSYNC();
296
297#ifdef NO_BL
298 /* REV, timer 5 */
299 bfin_write_TIMER_REV_CONFIG(TIMER_CONFIG|PULSE_HI);
300
301 bfin_write_TIMER_REV_WIDTH(DCLKS_PER_LINE);
302 bfin_write_TIMER_REV_PERIOD(DCLKS_PER_LINE*2);
303
304 SSYNC();
305#endif
306}
307
308static void config_ppi(void)
309{
310 bfin_write_PPI_DELAY(PPI_DELAY_VALUE);
311 bfin_write_PPI_COUNT(LCD_X_RES-1);
312 /* 0x10 -> PORT_CFG -> 2 or 3 frame syncs */
313 bfin_write_PPI_CONTROL((PPI_CONFIG_VALUE|0x10) & (~POLS));
314}
315
316static int config_dma(void)
317{
318 u32 i;
319
320 if (landscape) {
321
322 for (i = 0; i < U_LINES; ++i) {
323 /* blanking lines point to first line of fb_buffer */
324 dma_desc_table[2*i] = (unsigned long)&dma_desc_table[2*i+2];
325 dma_desc_table[2*i+1] = (unsigned long)fb_buffer;
326 }
327
328 for (i = U_LINES; i < U_LINES + LCD_Y_RES; ++i) {
329 /* visible lines */
330 dma_desc_table[2*i] = (unsigned long)&dma_desc_table[2*i+2];
331 dma_desc_table[2*i+1] = (unsigned long)fb_buffer +
332 (LCD_Y_RES+U_LINES-1-i)*2;
333 }
334
335 /* last descriptor points to first */
336 dma_desc_table[2*(LCD_Y_RES+U_LINES-1)] = (unsigned long)&dma_desc_table[0];
337
338 set_dma_x_count(CH_PPI, LCD_X_RES);
339 set_dma_x_modify(CH_PPI, LCD_Y_RES * (LCD_BBP / 8));
340 set_dma_y_count(CH_PPI, 0);
341 set_dma_y_modify(CH_PPI, 0);
342 set_dma_next_desc_addr(CH_PPI, (void *)dma_desc_table[0]);
343 set_dma_config(CH_PPI, DMAFLOW_LARGE | NDSIZE_4 | WDSIZE_16);
344
345 } else {
346
347 set_dma_config(CH_PPI, set_bfin_dma_config(DIR_READ,
348 DMA_FLOW_AUTO,
349 INTR_DISABLE,
350 DIMENSION_2D,
351 DATA_SIZE_16,
352 DMA_NOSYNC_KEEP_DMA_BUF));
353 set_dma_x_count(CH_PPI, LCD_X_RES);
354 set_dma_x_modify(CH_PPI, LCD_BBP / 8);
355 set_dma_y_count(CH_PPI, LCD_Y_RES+U_LINES);
356 set_dma_y_modify(CH_PPI, LCD_BBP / 8);
357 set_dma_start_addr(CH_PPI, (unsigned long) fb_buffer);
358 }
359
360 return 0;
361}
362
363static int __devinit request_ports(void)
364{
365 u16 tmr_req[] = TIMERS;
366
367 /*
368 UD: PF13
369 MOD: PF10
370 LBR: PF14
371 PPI_CLK: PF15
372 */
373
374 if (peripheral_request_list(ppi_pins, KBUILD_MODNAME)) {
375 pr_err("requesting PPI peripheral failed\n");
376 return -EBUSY;
377 }
378
379 if (peripheral_request_list(tmr_req, KBUILD_MODNAME)) {
380 peripheral_free_list(ppi_pins);
381 pr_err("requesting timer peripheral failed\n");
382 return -EBUSY;
383 }
384
385#if (defined(UD) && defined(LBR))
Jingoo Hanf8bd4932012-01-26 19:32:34 +0900386 if (gpio_request_one(UD, GPIOF_OUT_INIT_LOW, KBUILD_MODNAME)) {
Michael Hennerichdbcc4652010-11-24 09:33:58 +0000387 pr_err("requesting GPIO %d failed\n", UD);
388 return -EBUSY;
389 }
390
Jingoo Hanf8bd4932012-01-26 19:32:34 +0900391 if (gpio_request_one(LBR, GPIOF_OUT_INIT_HIGH, KBUILD_MODNAME)) {
Michael Hennerichdbcc4652010-11-24 09:33:58 +0000392 pr_err("requesting GPIO %d failed\n", LBR);
393 gpio_free(UD);
394 return -EBUSY;
395 }
Michael Hennerichdbcc4652010-11-24 09:33:58 +0000396#endif
397
Jingoo Hanf8bd4932012-01-26 19:32:34 +0900398 if (gpio_request_one(MOD, GPIOF_OUT_INIT_HIGH, KBUILD_MODNAME)) {
Michael Hennerichdbcc4652010-11-24 09:33:58 +0000399 pr_err("requesting GPIO %d failed\n", MOD);
400#if (defined(UD) && defined(LBR))
401 gpio_free(LBR);
402 gpio_free(UD);
403#endif
404 return -EBUSY;
405 }
406
Michael Hennerichdbcc4652010-11-24 09:33:58 +0000407 SSYNC();
408 return 0;
409}
410
411static void free_ports(void)
412{
413 u16 tmr_req[] = TIMERS;
414
415 peripheral_free_list(ppi_pins);
416 peripheral_free_list(tmr_req);
417
418#if defined(UD) && defined(LBR)
419 gpio_free(LBR);
420 gpio_free(UD);
421#endif
422 gpio_free(MOD);
423}
424
425static struct fb_info bfin_lq035_fb;
426
427static struct fb_var_screeninfo bfin_lq035_fb_defined = {
428 .bits_per_pixel = LCD_BBP,
429 .activate = FB_ACTIVATE_TEST,
430 .xres = LCD_X_RES, /*default portrait mode RGB*/
431 .yres = LCD_Y_RES,
432 .xres_virtual = LCD_X_RES,
433 .yres_virtual = LCD_Y_RES,
434 .height = -1,
435 .width = -1,
436 .left_margin = 0,
437 .right_margin = 0,
438 .upper_margin = 0,
439 .lower_margin = 0,
440 .red = {11, 5, 0},
441 .green = {5, 6, 0},
442 .blue = {0, 5, 0},
443 .transp = {0, 0, 0},
444};
445
446static struct fb_fix_screeninfo bfin_lq035_fb_fix __devinitdata = {
447 .id = KBUILD_MODNAME,
448 .smem_len = ACTIVE_VIDEO_MEM_SIZE,
449 .type = FB_TYPE_PACKED_PIXELS,
450 .visual = FB_VISUAL_TRUECOLOR,
451 .xpanstep = 0,
452 .ypanstep = 0,
453 .line_length = LCD_X_RES*(LCD_BBP/8),
454 .accel = FB_ACCEL_NONE,
455};
456
457
458static int bfin_lq035_fb_open(struct fb_info *info, int user)
459{
460 unsigned long flags;
461
462 spin_lock_irqsave(&bfin_lq035_lock, flags);
463 lq035_open_cnt++;
464 spin_unlock_irqrestore(&bfin_lq035_lock, flags);
465
466 if (lq035_open_cnt <= 1) {
467 bfin_write_PPI_CONTROL(0);
468 SSYNC();
469
470 set_vcomm();
471 config_dma();
472 config_ppi();
473
474 /* start dma */
475 enable_dma(CH_PPI);
476 SSYNC();
477 bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() | PORT_EN);
478 SSYNC();
479
480 if (!t_conf_done) {
481 config_timers();
482 start_timers();
483 }
484 /* gpio_set_value(MOD,1); */
485 }
486
487 return 0;
488}
489
490static int bfin_lq035_fb_release(struct fb_info *info, int user)
491{
492 unsigned long flags;
493
494 spin_lock_irqsave(&bfin_lq035_lock, flags);
495 lq035_open_cnt--;
496 spin_unlock_irqrestore(&bfin_lq035_lock, flags);
497
498
499 if (lq035_open_cnt <= 0) {
500
501 bfin_write_PPI_CONTROL(0);
502 SSYNC();
503
504 disable_dma(CH_PPI);
505 }
506
507 return 0;
508}
509
510
511static int bfin_lq035_fb_check_var(struct fb_var_screeninfo *var,
512 struct fb_info *info)
513{
514 switch (var->bits_per_pixel) {
515 case 16:/* DIRECTCOLOUR, 64k */
516 var->red.offset = info->var.red.offset;
517 var->green.offset = info->var.green.offset;
518 var->blue.offset = info->var.blue.offset;
519 var->red.length = info->var.red.length;
520 var->green.length = info->var.green.length;
521 var->blue.length = info->var.blue.length;
522 var->transp.offset = 0;
523 var->transp.length = 0;
524 var->transp.msb_right = 0;
525 var->red.msb_right = 0;
526 var->green.msb_right = 0;
527 var->blue.msb_right = 0;
528 break;
529 default:
530 pr_debug("%s: depth not supported: %u BPP\n", __func__,
531 var->bits_per_pixel);
532 return -EINVAL;
533 }
534
535 if (info->var.xres != var->xres ||
536 info->var.yres != var->yres ||
537 info->var.xres_virtual != var->xres_virtual ||
538 info->var.yres_virtual != var->yres_virtual) {
539 pr_debug("%s: Resolution not supported: X%u x Y%u\n",
540 __func__, var->xres, var->yres);
541 return -EINVAL;
542 }
543
544 /*
545 * Memory limit
546 */
547
548 if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) {
549 pr_debug("%s: Memory Limit requested yres_virtual = %u\n",
550 __func__, var->yres_virtual);
551 return -ENOMEM;
552 }
553
554 return 0;
555}
556
557/* fb_rotate
558 * Rotate the display of this angle. This doesn't seems to be used by the core,
559 * but as our hardware supports it, so why not implementing it...
560 */
561static void bfin_lq035_fb_rotate(struct fb_info *fbi, int angle)
562{
563 pr_debug("%s: %p %d", __func__, fbi, angle);
564#if (defined(UD) && defined(LBR))
565 switch (angle) {
566
567 case 180:
568 gpio_set_value(LBR, 0);
569 gpio_set_value(UD, 1);
570 break;
571 default:
572 gpio_set_value(LBR, 1);
573 gpio_set_value(UD, 0);
574 break;
575 }
576#endif
577}
578
579static int bfin_lq035_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
580{
581 if (nocursor)
582 return 0;
583 else
584 return -EINVAL; /* just to force soft_cursor() call */
585}
586
587static int bfin_lq035_fb_setcolreg(u_int regno, u_int red, u_int green,
588 u_int blue, u_int transp,
589 struct fb_info *info)
590{
591 if (regno >= NBR_PALETTE)
592 return -EINVAL;
593
594 if (info->var.grayscale)
595 /* grayscale = 0.30*R + 0.59*G + 0.11*B */
596 red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
597
598 if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
599
600 u32 value;
601 /* Place color in the pseudopalette */
602 if (regno > 16)
603 return -EINVAL;
604
605 red >>= (16 - info->var.red.length);
606 green >>= (16 - info->var.green.length);
607 blue >>= (16 - info->var.blue.length);
608
609 value = (red << info->var.red.offset) |
610 (green << info->var.green.offset)|
611 (blue << info->var.blue.offset);
612 value &= 0xFFFF;
613
614 ((u32 *) (info->pseudo_palette))[regno] = value;
615
616 }
617
618 return 0;
619}
620
621static struct fb_ops bfin_lq035_fb_ops = {
622 .owner = THIS_MODULE,
623 .fb_open = bfin_lq035_fb_open,
624 .fb_release = bfin_lq035_fb_release,
625 .fb_check_var = bfin_lq035_fb_check_var,
626 .fb_rotate = bfin_lq035_fb_rotate,
627 .fb_fillrect = cfb_fillrect,
628 .fb_copyarea = cfb_copyarea,
629 .fb_imageblit = cfb_imageblit,
630 .fb_cursor = bfin_lq035_fb_cursor,
631 .fb_setcolreg = bfin_lq035_fb_setcolreg,
632};
633
634static int bl_get_brightness(struct backlight_device *bd)
635{
636 return current_brightness;
637}
638
639static const struct backlight_ops bfin_lq035fb_bl_ops = {
640 .get_brightness = bl_get_brightness,
641};
642
643static struct backlight_device *bl_dev;
644
645static int bfin_lcd_get_power(struct lcd_device *dev)
646{
647 return 0;
648}
649
650static int bfin_lcd_set_power(struct lcd_device *dev, int power)
651{
652 return 0;
653}
654
655static int bfin_lcd_get_contrast(struct lcd_device *dev)
656{
657 return (int)vcomm_value;
658}
659
660static int bfin_lcd_set_contrast(struct lcd_device *dev, int contrast)
661{
662 if (contrast > 255)
663 contrast = 255;
664 if (contrast < 0)
665 contrast = 0;
666
667 vcomm_value = (unsigned char)contrast;
668 set_vcomm();
669 return 0;
670}
671
672static int bfin_lcd_check_fb(struct lcd_device *lcd, struct fb_info *fi)
673{
674 if (!fi || (fi == &bfin_lq035_fb))
675 return 1;
676 return 0;
677}
678
679static struct lcd_ops bfin_lcd_ops = {
680 .get_power = bfin_lcd_get_power,
681 .set_power = bfin_lcd_set_power,
682 .get_contrast = bfin_lcd_get_contrast,
683 .set_contrast = bfin_lcd_set_contrast,
684 .check_fb = bfin_lcd_check_fb,
685};
686
687static struct lcd_device *lcd_dev;
688
689static int __devinit bfin_lq035_probe(struct platform_device *pdev)
690{
691 struct backlight_properties props;
692 dma_addr_t dma_handle;
Julia Lawall5dc13652011-01-24 19:55:21 +0000693 int ret;
Michael Hennerichdbcc4652010-11-24 09:33:58 +0000694
695 if (request_dma(CH_PPI, KBUILD_MODNAME)) {
696 pr_err("couldn't request PPI DMA\n");
697 return -EFAULT;
698 }
699
700 if (request_ports()) {
701 pr_err("couldn't request gpio port\n");
Julia Lawall5dc13652011-01-24 19:55:21 +0000702 ret = -EFAULT;
703 goto out_ports;
Michael Hennerichdbcc4652010-11-24 09:33:58 +0000704 }
705
706 fb_buffer = dma_alloc_coherent(NULL, TOTAL_VIDEO_MEM_SIZE,
707 &dma_handle, GFP_KERNEL);
708 if (fb_buffer == NULL) {
709 pr_err("couldn't allocate dma buffer\n");
Julia Lawall5dc13652011-01-24 19:55:21 +0000710 ret = -ENOMEM;
711 goto out_dma_coherent;
Michael Hennerichdbcc4652010-11-24 09:33:58 +0000712 }
713
714 if (L1_DATA_A_LENGTH)
715 dma_desc_table = l1_data_sram_zalloc(TOTAL_DMA_DESC_SIZE);
716 else
717 dma_desc_table = dma_alloc_coherent(NULL, TOTAL_DMA_DESC_SIZE,
718 &dma_handle, 0);
719
720 if (dma_desc_table == NULL) {
721 pr_err("couldn't allocate dma descriptor\n");
Julia Lawall5dc13652011-01-24 19:55:21 +0000722 ret = -ENOMEM;
723 goto out_table;
Michael Hennerichdbcc4652010-11-24 09:33:58 +0000724 }
725
726 bfin_lq035_fb.screen_base = (void *)fb_buffer;
727 bfin_lq035_fb_fix.smem_start = (int)fb_buffer;
728 if (landscape) {
729 bfin_lq035_fb_defined.xres = LCD_Y_RES;
730 bfin_lq035_fb_defined.yres = LCD_X_RES;
731 bfin_lq035_fb_defined.xres_virtual = LCD_Y_RES;
732 bfin_lq035_fb_defined.yres_virtual = LCD_X_RES;
733
734 bfin_lq035_fb_fix.line_length = LCD_Y_RES*(LCD_BBP/8);
735 } else {
736 bfin_lq035_fb.screen_base += ACTIVE_VIDEO_MEM_OFFSET;
737 bfin_lq035_fb_fix.smem_start += ACTIVE_VIDEO_MEM_OFFSET;
738 }
739
740 bfin_lq035_fb_defined.green.msb_right = 0;
741 bfin_lq035_fb_defined.red.msb_right = 0;
742 bfin_lq035_fb_defined.blue.msb_right = 0;
743 bfin_lq035_fb_defined.green.offset = 5;
744 bfin_lq035_fb_defined.green.length = 6;
745 bfin_lq035_fb_defined.red.length = 5;
746 bfin_lq035_fb_defined.blue.length = 5;
747
748 if (bgr) {
749 bfin_lq035_fb_defined.red.offset = 0;
750 bfin_lq035_fb_defined.blue.offset = 11;
751 } else {
752 bfin_lq035_fb_defined.red.offset = 11;
753 bfin_lq035_fb_defined.blue.offset = 0;
754 }
755
756 bfin_lq035_fb.fbops = &bfin_lq035_fb_ops;
757 bfin_lq035_fb.var = bfin_lq035_fb_defined;
758
759 bfin_lq035_fb.fix = bfin_lq035_fb_fix;
760 bfin_lq035_fb.flags = FBINFO_DEFAULT;
761
762
763 bfin_lq035_fb.pseudo_palette = kzalloc(sizeof(u32) * 16, GFP_KERNEL);
764 if (bfin_lq035_fb.pseudo_palette == NULL) {
765 pr_err("failed to allocate pseudo_palette\n");
Julia Lawall5dc13652011-01-24 19:55:21 +0000766 ret = -ENOMEM;
767 goto out_palette;
Michael Hennerichdbcc4652010-11-24 09:33:58 +0000768 }
769
770 if (fb_alloc_cmap(&bfin_lq035_fb.cmap, NBR_PALETTE, 0) < 0) {
771 pr_err("failed to allocate colormap (%d entries)\n",
772 NBR_PALETTE);
Julia Lawall5dc13652011-01-24 19:55:21 +0000773 ret = -EFAULT;
774 goto out_cmap;
Michael Hennerichdbcc4652010-11-24 09:33:58 +0000775 }
776
777 if (register_framebuffer(&bfin_lq035_fb) < 0) {
778 pr_err("unable to register framebuffer\n");
Julia Lawall5dc13652011-01-24 19:55:21 +0000779 ret = -EINVAL;
780 goto out_reg;
Michael Hennerichdbcc4652010-11-24 09:33:58 +0000781 }
782
783 i2c_add_driver(&ad5280_driver);
784
785 memset(&props, 0, sizeof(props));
Steven Miao70f289d2011-05-30 03:23:36 +0000786 props.type = BACKLIGHT_RAW;
Michael Hennerichdbcc4652010-11-24 09:33:58 +0000787 props.max_brightness = MAX_BRIGHENESS;
788 bl_dev = backlight_device_register("bf537-bl", NULL, NULL,
789 &bfin_lq035fb_bl_ops, &props);
790
791 lcd_dev = lcd_device_register(KBUILD_MODNAME, &pdev->dev, NULL,
792 &bfin_lcd_ops);
Julia Lawall5dc13652011-01-24 19:55:21 +0000793 if (IS_ERR(lcd_dev)) {
794 pr_err("unable to register lcd\n");
795 ret = PTR_ERR(lcd_dev);
796 goto out_lcd;
797 }
Michael Hennerichdbcc4652010-11-24 09:33:58 +0000798 lcd_dev->props.max_contrast = 255,
799
800 pr_info("initialized");
801
802 return 0;
Julia Lawall5dc13652011-01-24 19:55:21 +0000803out_lcd:
804 unregister_framebuffer(&bfin_lq035_fb);
805out_reg:
806 fb_dealloc_cmap(&bfin_lq035_fb.cmap);
807out_cmap:
808 kfree(bfin_lq035_fb.pseudo_palette);
809out_palette:
810out_table:
811 dma_free_coherent(NULL, TOTAL_VIDEO_MEM_SIZE, fb_buffer, 0);
812 fb_buffer = NULL;
813out_dma_coherent:
814 free_ports();
815out_ports:
816 free_dma(CH_PPI);
817 return ret;
Michael Hennerichdbcc4652010-11-24 09:33:58 +0000818}
819
820static int __devexit bfin_lq035_remove(struct platform_device *pdev)
821{
822 if (fb_buffer != NULL)
823 dma_free_coherent(NULL, TOTAL_VIDEO_MEM_SIZE, fb_buffer, 0);
824
825 if (L1_DATA_A_LENGTH)
826 l1_data_sram_free(dma_desc_table);
827 else
828 dma_free_coherent(NULL, TOTAL_DMA_DESC_SIZE, NULL, 0);
829
830 bfin_write_TIMER_DISABLE(TIMEN_SP|TIMEN_SPS|TIMEN_PS_CLS|
831 TIMEN_LP|TIMEN_REV);
832 t_conf_done = 0;
833
834 free_dma(CH_PPI);
835
836
837 kfree(bfin_lq035_fb.pseudo_palette);
838 fb_dealloc_cmap(&bfin_lq035_fb.cmap);
839
840
841 lcd_device_unregister(lcd_dev);
842 backlight_device_unregister(bl_dev);
843
844 unregister_framebuffer(&bfin_lq035_fb);
845 i2c_del_driver(&ad5280_driver);
846
847 free_ports();
848
849 pr_info("unregistered LCD driver\n");
850
851 return 0;
852}
853
854#ifdef CONFIG_PM
855static int bfin_lq035_suspend(struct platform_device *pdev, pm_message_t state)
856{
857 if (lq035_open_cnt > 0) {
858 bfin_write_PPI_CONTROL(0);
859 SSYNC();
860 disable_dma(CH_PPI);
861 }
862
863 return 0;
864}
865
866static int bfin_lq035_resume(struct platform_device *pdev)
867{
868 if (lq035_open_cnt > 0) {
869 bfin_write_PPI_CONTROL(0);
870 SSYNC();
871
872 config_dma();
873 config_ppi();
874
875 enable_dma(CH_PPI);
876 bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() | PORT_EN);
877 SSYNC();
878
879 config_timers();
880 start_timers();
881 } else {
882 t_conf_done = 0;
883 }
884
885 return 0;
886}
887#else
888# define bfin_lq035_suspend NULL
889# define bfin_lq035_resume NULL
890#endif
891
892static struct platform_driver bfin_lq035_driver = {
893 .probe = bfin_lq035_probe,
894 .remove = __devexit_p(bfin_lq035_remove),
895 .suspend = bfin_lq035_suspend,
896 .resume = bfin_lq035_resume,
897 .driver = {
898 .name = KBUILD_MODNAME,
899 .owner = THIS_MODULE,
900 },
901};
902
903static int __init bfin_lq035_driver_init(void)
904{
905 request_module("i2c-bfin-twi");
906 return platform_driver_register(&bfin_lq035_driver);
907}
908module_init(bfin_lq035_driver_init);
909
910static void __exit bfin_lq035_driver_cleanup(void)
911{
912 platform_driver_unregister(&bfin_lq035_driver);
913}
914module_exit(bfin_lq035_driver_cleanup);
915
916MODULE_DESCRIPTION("SHARP LQ035Q7DB03 TFT LCD Driver");
917MODULE_LICENSE("GPL");