blob: b3fae357ca494e52ac257e80b3eb223417811de7 [file] [log] [blame]
Alessandro Zummo1fec7c62006-03-27 01:16:42 -08001/*
2 * An i2c driver for the Xicor/Intersil X1205 RTC
3 * Copyright 2004 Karen Spearel
4 * Copyright 2005 Alessandro Zummo
5 *
6 * please send all reports to:
7 * Karen Spearel <kas111 at gmail dot com>
8 * Alessandro Zummo <a.zummo@towertech.it>
9 *
10 * based on a lot of other RTC drivers.
11 *
Jean Delvare890e0372007-07-12 14:12:28 +020012 * Information and datasheet:
13 * http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html
14 *
Alessandro Zummo1fec7c62006-03-27 01:16:42 -080015 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License version 2 as
17 * published by the Free Software Foundation.
18 */
19
20#include <linux/i2c.h>
21#include <linux/bcd.h>
22#include <linux/rtc.h>
23#include <linux/delay.h>
24
Alessandro Zummo015aefb2006-04-10 22:54:42 -070025#define DRV_VERSION "1.0.7"
Alessandro Zummo1fec7c62006-03-27 01:16:42 -080026
27/* Addresses to scan: none. This chip is located at
28 * 0x6f and uses a two bytes register addressing.
29 * Two bytes need to be written to read a single register,
30 * while most other chips just require one and take the second
31 * one as the data to be written. To prevent corrupting
Jean Delvare890e0372007-07-12 14:12:28 +020032 * unknown chips, the user must explicitly set the probe parameter.
Alessandro Zummo1fec7c62006-03-27 01:16:42 -080033 */
34
35static unsigned short normal_i2c[] = { I2C_CLIENT_END };
36
37/* Insmod parameters */
38I2C_CLIENT_INSMOD;
39
40/* offsets into CCR area */
41
42#define CCR_SEC 0
43#define CCR_MIN 1
44#define CCR_HOUR 2
45#define CCR_MDAY 3
46#define CCR_MONTH 4
47#define CCR_YEAR 5
48#define CCR_WDAY 6
49#define CCR_Y2K 7
50
51#define X1205_REG_SR 0x3F /* status register */
52#define X1205_REG_Y2K 0x37
53#define X1205_REG_DW 0x36
54#define X1205_REG_YR 0x35
55#define X1205_REG_MO 0x34
56#define X1205_REG_DT 0x33
57#define X1205_REG_HR 0x32
58#define X1205_REG_MN 0x31
59#define X1205_REG_SC 0x30
60#define X1205_REG_DTR 0x13
61#define X1205_REG_ATR 0x12
62#define X1205_REG_INT 0x11
63#define X1205_REG_0 0x10
64#define X1205_REG_Y2K1 0x0F
65#define X1205_REG_DWA1 0x0E
66#define X1205_REG_YRA1 0x0D
67#define X1205_REG_MOA1 0x0C
68#define X1205_REG_DTA1 0x0B
69#define X1205_REG_HRA1 0x0A
70#define X1205_REG_MNA1 0x09
71#define X1205_REG_SCA1 0x08
72#define X1205_REG_Y2K0 0x07
73#define X1205_REG_DWA0 0x06
74#define X1205_REG_YRA0 0x05
75#define X1205_REG_MOA0 0x04
76#define X1205_REG_DTA0 0x03
77#define X1205_REG_HRA0 0x02
78#define X1205_REG_MNA0 0x01
79#define X1205_REG_SCA0 0x00
80
81#define X1205_CCR_BASE 0x30 /* Base address of CCR */
82#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */
83
84#define X1205_SR_RTCF 0x01 /* Clock failure */
85#define X1205_SR_WEL 0x02 /* Write Enable Latch */
86#define X1205_SR_RWEL 0x04 /* Register Write Enable */
87
88#define X1205_DTR_DTR0 0x01
89#define X1205_DTR_DTR1 0x02
90#define X1205_DTR_DTR2 0x04
91
92#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
93
94/* Prototypes */
95static int x1205_attach(struct i2c_adapter *adapter);
96static int x1205_detach(struct i2c_client *client);
97static int x1205_probe(struct i2c_adapter *adapter, int address, int kind);
98
99static struct i2c_driver x1205_driver = {
100 .driver = {
101 .name = "x1205",
102 },
103 .id = I2C_DRIVERID_X1205,
104 .attach_adapter = &x1205_attach,
105 .detach_client = &x1205_detach,
106};
107
108/*
109 * In the routines that deal directly with the x1205 hardware, we use
110 * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
111 * Epoch is initialized as 2000. Time is set to UTC.
112 */
113static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
114 unsigned char reg_base)
115{
116 unsigned char dt_addr[2] = { 0, reg_base };
117
118 unsigned char buf[8];
119
120 struct i2c_msg msgs[] = {
121 { client->addr, 0, 2, dt_addr }, /* setup read ptr */
122 { client->addr, I2C_M_RD, 8, buf }, /* read date */
123 };
124
125 /* read date registers */
126 if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
127 dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
128 return -EIO;
129 }
130
131 dev_dbg(&client->dev,
132 "%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
133 "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
134 __FUNCTION__,
135 buf[0], buf[1], buf[2], buf[3],
136 buf[4], buf[5], buf[6], buf[7]);
137
138 tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
139 tm->tm_min = BCD2BIN(buf[CCR_MIN]);
140 tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
141 tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
142 tm->tm_mon = BCD2BIN(buf[CCR_MONTH]) - 1; /* mon is 0-11 */
143 tm->tm_year = BCD2BIN(buf[CCR_YEAR])
144 + (BCD2BIN(buf[CCR_Y2K]) * 100) - 1900;
145 tm->tm_wday = buf[CCR_WDAY];
146
147 dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
148 "mday=%d, mon=%d, year=%d, wday=%d\n",
149 __FUNCTION__,
150 tm->tm_sec, tm->tm_min, tm->tm_hour,
151 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
152
153 return 0;
154}
155
156static int x1205_get_status(struct i2c_client *client, unsigned char *sr)
157{
158 static unsigned char sr_addr[2] = { 0, X1205_REG_SR };
159
160 struct i2c_msg msgs[] = {
161 { client->addr, 0, 2, sr_addr }, /* setup read ptr */
162 { client->addr, I2C_M_RD, 1, sr }, /* read status */
163 };
164
165 /* read status register */
166 if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
167 dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
168 return -EIO;
169 }
170
171 return 0;
172}
173
174static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
175 int datetoo, u8 reg_base)
176{
177 int i, xfer;
178 unsigned char buf[8];
179
180 static const unsigned char wel[3] = { 0, X1205_REG_SR,
181 X1205_SR_WEL };
182
183 static const unsigned char rwel[3] = { 0, X1205_REG_SR,
184 X1205_SR_WEL | X1205_SR_RWEL };
185
186 static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
187
188 dev_dbg(&client->dev,
189 "%s: secs=%d, mins=%d, hours=%d\n",
190 __FUNCTION__,
191 tm->tm_sec, tm->tm_min, tm->tm_hour);
192
193 buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
194 buf[CCR_MIN] = BIN2BCD(tm->tm_min);
195
196 /* set hour and 24hr bit */
197 buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL;
198
199 /* should we also set the date? */
200 if (datetoo) {
201 dev_dbg(&client->dev,
202 "%s: mday=%d, mon=%d, year=%d, wday=%d\n",
203 __FUNCTION__,
204 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
205
206 buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
207
208 /* month, 1 - 12 */
209 buf[CCR_MONTH] = BIN2BCD(tm->tm_mon + 1);
210
211 /* year, since the rtc epoch*/
212 buf[CCR_YEAR] = BIN2BCD(tm->tm_year % 100);
213 buf[CCR_WDAY] = tm->tm_wday & 0x07;
214 buf[CCR_Y2K] = BIN2BCD(tm->tm_year / 100);
215 }
216
217 /* this sequence is required to unlock the chip */
218 if ((xfer = i2c_master_send(client, wel, 3)) != 3) {
219 dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer);
220 return -EIO;
221 }
222
223 if ((xfer = i2c_master_send(client, rwel, 3)) != 3) {
224 dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer);
225 return -EIO;
226 }
227
228 /* write register's data */
229 for (i = 0; i < (datetoo ? 8 : 3); i++) {
230 unsigned char rdata[3] = { 0, reg_base + i, buf[i] };
231
232 xfer = i2c_master_send(client, rdata, 3);
233 if (xfer != 3) {
234 dev_err(&client->dev,
235 "%s: xfer=%d addr=%02x, data=%02x\n",
236 __FUNCTION__,
237 xfer, rdata[1], rdata[2]);
238 return -EIO;
239 }
240 };
241
242 /* disable further writes */
243 if ((xfer = i2c_master_send(client, diswe, 3)) != 3) {
244 dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer);
245 return -EIO;
246 }
247
248 return 0;
249}
250
251static int x1205_fix_osc(struct i2c_client *client)
252{
253 int err;
254 struct rtc_time tm;
255
256 tm.tm_hour = tm.tm_min = tm.tm_sec = 0;
257
258 if ((err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE)) < 0)
259 dev_err(&client->dev,
260 "unable to restart the oscillator\n");
261
262 return err;
263}
264
265static int x1205_get_dtrim(struct i2c_client *client, int *trim)
266{
267 unsigned char dtr;
268 static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR };
269
270 struct i2c_msg msgs[] = {
271 { client->addr, 0, 2, dtr_addr }, /* setup read ptr */
272 { client->addr, I2C_M_RD, 1, &dtr }, /* read dtr */
273 };
274
275 /* read dtr register */
276 if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
277 dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
278 return -EIO;
279 }
280
281 dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr);
282
283 *trim = 0;
284
285 if (dtr & X1205_DTR_DTR0)
286 *trim += 20;
287
288 if (dtr & X1205_DTR_DTR1)
289 *trim += 10;
290
291 if (dtr & X1205_DTR_DTR2)
292 *trim = -*trim;
293
294 return 0;
295}
296
297static int x1205_get_atrim(struct i2c_client *client, int *trim)
298{
299 s8 atr;
300 static unsigned char atr_addr[2] = { 0, X1205_REG_ATR };
301
302 struct i2c_msg msgs[] = {
303 { client->addr, 0, 2, atr_addr }, /* setup read ptr */
304 { client->addr, I2C_M_RD, 1, &atr }, /* read atr */
305 };
306
307 /* read atr register */
308 if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
309 dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
310 return -EIO;
311 }
312
313 dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr);
314
315 /* atr is a two's complement value on 6 bits,
316 * perform sign extension. The formula is
317 * Catr = (atr * 0.25pF) + 11.00pF.
318 */
319 if (atr & 0x20)
320 atr |= 0xC0;
321
322 dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr);
323
324 *trim = (atr * 250) + 11000;
325
326 dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim);
327
328 return 0;
329}
330
331struct x1205_limit
332{
333 unsigned char reg, mask, min, max;
334};
335
336static int x1205_validate_client(struct i2c_client *client)
337{
338 int i, xfer;
339
340 /* Probe array. We will read the register at the specified
341 * address and check if the given bits are zero.
342 */
343 static const unsigned char probe_zero_pattern[] = {
344 /* register, mask */
345 X1205_REG_SR, 0x18,
346 X1205_REG_DTR, 0xF8,
347 X1205_REG_ATR, 0xC0,
348 X1205_REG_INT, 0x18,
349 X1205_REG_0, 0xFF,
350 };
351
352 static const struct x1205_limit probe_limits_pattern[] = {
353 /* register, mask, min, max */
354 { X1205_REG_Y2K, 0xFF, 19, 20 },
355 { X1205_REG_DW, 0xFF, 0, 6 },
356 { X1205_REG_YR, 0xFF, 0, 99 },
357 { X1205_REG_MO, 0xFF, 0, 12 },
358 { X1205_REG_DT, 0xFF, 0, 31 },
359 { X1205_REG_HR, 0x7F, 0, 23 },
360 { X1205_REG_MN, 0xFF, 0, 59 },
361 { X1205_REG_SC, 0xFF, 0, 59 },
362 { X1205_REG_Y2K1, 0xFF, 19, 20 },
363 { X1205_REG_Y2K0, 0xFF, 19, 20 },
364 };
365
366 /* check that registers have bits a 0 where expected */
367 for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) {
368 unsigned char buf;
369
370 unsigned char addr[2] = { 0, probe_zero_pattern[i] };
371
372 struct i2c_msg msgs[2] = {
373 { client->addr, 0, 2, addr },
374 { client->addr, I2C_M_RD, 1, &buf },
375 };
376
377 if ((xfer = i2c_transfer(client->adapter, msgs, 2)) != 2) {
David Brownella14e1892006-12-10 02:19:02 -0800378 dev_err(&client->dev,
Alessandro Zummo1fec7c62006-03-27 01:16:42 -0800379 "%s: could not read register %x\n",
380 __FUNCTION__, probe_zero_pattern[i]);
381
382 return -EIO;
383 }
384
385 if ((buf & probe_zero_pattern[i+1]) != 0) {
David Brownella14e1892006-12-10 02:19:02 -0800386 dev_err(&client->dev,
Alessandro Zummo1fec7c62006-03-27 01:16:42 -0800387 "%s: register=%02x, zero pattern=%d, value=%x\n",
388 __FUNCTION__, probe_zero_pattern[i], i, buf);
389
390 return -ENODEV;
391 }
392 }
393
394 /* check limits (only registers with bcd values) */
395 for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) {
396 unsigned char reg, value;
397
398 unsigned char addr[2] = { 0, probe_limits_pattern[i].reg };
399
400 struct i2c_msg msgs[2] = {
401 { client->addr, 0, 2, addr },
402 { client->addr, I2C_M_RD, 1, &reg },
403 };
404
405 if ((xfer = i2c_transfer(client->adapter, msgs, 2)) != 2) {
David Brownella14e1892006-12-10 02:19:02 -0800406 dev_err(&client->dev,
Alessandro Zummo1fec7c62006-03-27 01:16:42 -0800407 "%s: could not read register %x\n",
408 __FUNCTION__, probe_limits_pattern[i].reg);
409
410 return -EIO;
411 }
412
413 value = BCD2BIN(reg & probe_limits_pattern[i].mask);
414
415 if (value > probe_limits_pattern[i].max ||
416 value < probe_limits_pattern[i].min) {
David Brownella14e1892006-12-10 02:19:02 -0800417 dev_dbg(&client->dev,
Alessandro Zummo1fec7c62006-03-27 01:16:42 -0800418 "%s: register=%x, lim pattern=%d, value=%d\n",
419 __FUNCTION__, probe_limits_pattern[i].reg,
420 i, value);
421
422 return -ENODEV;
423 }
424 }
425
426 return 0;
427}
428
429static int x1205_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
430{
431 return x1205_get_datetime(to_i2c_client(dev),
432 &alrm->time, X1205_ALM0_BASE);
433}
434
435static int x1205_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
436{
437 return x1205_set_datetime(to_i2c_client(dev),
438 &alrm->time, 1, X1205_ALM0_BASE);
439}
440
441static int x1205_rtc_read_time(struct device *dev, struct rtc_time *tm)
442{
443 return x1205_get_datetime(to_i2c_client(dev),
444 tm, X1205_CCR_BASE);
445}
446
447static int x1205_rtc_set_time(struct device *dev, struct rtc_time *tm)
448{
449 return x1205_set_datetime(to_i2c_client(dev),
450 tm, 1, X1205_CCR_BASE);
451}
452
453static int x1205_rtc_proc(struct device *dev, struct seq_file *seq)
454{
455 int err, dtrim, atrim;
456
Alessandro Zummo1fec7c62006-03-27 01:16:42 -0800457 if ((err = x1205_get_dtrim(to_i2c_client(dev), &dtrim)) == 0)
458 seq_printf(seq, "digital_trim\t: %d ppm\n", dtrim);
459
460 if ((err = x1205_get_atrim(to_i2c_client(dev), &atrim)) == 0)
461 seq_printf(seq, "analog_trim\t: %d.%02d pF\n",
462 atrim / 1000, atrim % 1000);
463 return 0;
464}
465
David Brownellff8371a2006-09-30 23:28:17 -0700466static const struct rtc_class_ops x1205_rtc_ops = {
Alessandro Zummo1fec7c62006-03-27 01:16:42 -0800467 .proc = x1205_rtc_proc,
468 .read_time = x1205_rtc_read_time,
469 .set_time = x1205_rtc_set_time,
470 .read_alarm = x1205_rtc_read_alarm,
471 .set_alarm = x1205_rtc_set_alarm,
472};
473
474static ssize_t x1205_sysfs_show_atrim(struct device *dev,
475 struct device_attribute *attr, char *buf)
476{
Alessandro Zummo015aefb2006-04-10 22:54:42 -0700477 int err, atrim;
Alessandro Zummo1fec7c62006-03-27 01:16:42 -0800478
Alessandro Zummo015aefb2006-04-10 22:54:42 -0700479 err = x1205_get_atrim(to_i2c_client(dev), &atrim);
480 if (err)
481 return err;
482
483 return sprintf(buf, "%d.%02d pF\n", atrim / 1000, atrim % 1000);
Alessandro Zummo1fec7c62006-03-27 01:16:42 -0800484}
485static DEVICE_ATTR(atrim, S_IRUGO, x1205_sysfs_show_atrim, NULL);
486
487static ssize_t x1205_sysfs_show_dtrim(struct device *dev,
488 struct device_attribute *attr, char *buf)
489{
Alessandro Zummo015aefb2006-04-10 22:54:42 -0700490 int err, dtrim;
Alessandro Zummo1fec7c62006-03-27 01:16:42 -0800491
Alessandro Zummo015aefb2006-04-10 22:54:42 -0700492 err = x1205_get_dtrim(to_i2c_client(dev), &dtrim);
493 if (err)
494 return err;
Alessandro Zummo1fec7c62006-03-27 01:16:42 -0800495
Alessandro Zummo015aefb2006-04-10 22:54:42 -0700496 return sprintf(buf, "%d ppm\n", dtrim);
Alessandro Zummo1fec7c62006-03-27 01:16:42 -0800497}
498static DEVICE_ATTR(dtrim, S_IRUGO, x1205_sysfs_show_dtrim, NULL);
499
500static int x1205_attach(struct i2c_adapter *adapter)
501{
Alessandro Zummo1fec7c62006-03-27 01:16:42 -0800502 return i2c_probe(adapter, &addr_data, x1205_probe);
503}
504
505static int x1205_probe(struct i2c_adapter *adapter, int address, int kind)
506{
507 int err = 0;
508 unsigned char sr;
509 struct i2c_client *client;
510 struct rtc_device *rtc;
511
Jean Delvare5dd3ffa2007-02-13 22:09:04 +0100512 dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
Alessandro Zummo1fec7c62006-03-27 01:16:42 -0800513
514 if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
515 err = -ENODEV;
516 goto exit;
517 }
518
519 if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
520 err = -ENOMEM;
521 goto exit;
522 }
523
524 /* I2C client */
525 client->addr = address;
526 client->driver = &x1205_driver;
527 client->adapter = adapter;
528
529 strlcpy(client->name, x1205_driver.driver.name, I2C_NAME_SIZE);
530
531 /* Verify the chip is really an X1205 */
532 if (kind < 0) {
533 if (x1205_validate_client(client) < 0) {
534 err = -ENODEV;
535 goto exit_kfree;
536 }
537 }
538
539 /* Inform the i2c layer */
540 if ((err = i2c_attach_client(client)))
541 goto exit_kfree;
542
543 dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
544
545 rtc = rtc_device_register(x1205_driver.driver.name, &client->dev,
546 &x1205_rtc_ops, THIS_MODULE);
547
548 if (IS_ERR(rtc)) {
549 err = PTR_ERR(rtc);
Alessandro Zummo1fec7c62006-03-27 01:16:42 -0800550 goto exit_detach;
551 }
552
553 i2c_set_clientdata(client, rtc);
554
555 /* Check for power failures and eventualy enable the osc */
556 if ((err = x1205_get_status(client, &sr)) == 0) {
557 if (sr & X1205_SR_RTCF) {
558 dev_err(&client->dev,
559 "power failure detected, "
560 "please set the clock\n");
561 udelay(50);
562 x1205_fix_osc(client);
563 }
564 }
565 else
566 dev_err(&client->dev, "couldn't read status\n");
567
Jeff Garzik91046a82006-12-06 20:35:34 -0800568 err = device_create_file(&client->dev, &dev_attr_atrim);
569 if (err) goto exit_devreg;
570 err = device_create_file(&client->dev, &dev_attr_dtrim);
571 if (err) goto exit_atrim;
Alessandro Zummo1fec7c62006-03-27 01:16:42 -0800572
573 return 0;
574
Jeff Garzik91046a82006-12-06 20:35:34 -0800575exit_atrim:
576 device_remove_file(&client->dev, &dev_attr_atrim);
577
578exit_devreg:
579 rtc_device_unregister(rtc);
580
Alessandro Zummo1fec7c62006-03-27 01:16:42 -0800581exit_detach:
582 i2c_detach_client(client);
583
584exit_kfree:
585 kfree(client);
586
587exit:
588 return err;
589}
590
591static int x1205_detach(struct i2c_client *client)
592{
593 int err;
594 struct rtc_device *rtc = i2c_get_clientdata(client);
595
Alessandro Zummo1fec7c62006-03-27 01:16:42 -0800596 if (rtc)
597 rtc_device_unregister(rtc);
598
599 if ((err = i2c_detach_client(client)))
600 return err;
601
602 kfree(client);
603
604 return 0;
605}
606
607static int __init x1205_init(void)
608{
609 return i2c_add_driver(&x1205_driver);
610}
611
612static void __exit x1205_exit(void)
613{
614 i2c_del_driver(&x1205_driver);
615}
616
617MODULE_AUTHOR(
618 "Karen Spearel <kas111 at gmail dot com>, "
619 "Alessandro Zummo <a.zummo@towertech.it>");
620MODULE_DESCRIPTION("Xicor/Intersil X1205 RTC driver");
621MODULE_LICENSE("GPL");
622MODULE_VERSION(DRV_VERSION);
623
624module_init(x1205_init);
625module_exit(x1205_exit);