blob: 7ebdb4fb4e54a3fe8943de5190f7f5de0ac59b08 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * ipmi.h
3 *
4 * MontaVista IPMI interface
5 *
6 * Author: MontaVista Software, Inc.
7 * Corey Minyard <minyard@mvista.com>
8 * source@mvista.com
9 *
10 * Copyright 2002 MontaVista Software Inc.
11 *
12 * This program is free software; you can redistribute it and/or modify it
13 * under the terms of the GNU General Public License as published by the
14 * Free Software Foundation; either version 2 of the License, or (at your
15 * option) any later version.
16 *
17 *
18 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
19 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
20 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
21 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
22 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
23 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
24 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
25 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
26 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
27 * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28 *
29 * You should have received a copy of the GNU General Public License along
30 * with this program; if not, write to the Free Software Foundation, Inc.,
31 * 675 Mass Ave, Cambridge, MA 02139, USA.
32 */
33
34#ifndef __LINUX_IPMI_H
35#define __LINUX_IPMI_H
36
37#include <linux/ipmi_msgdefs.h>
Corey Minyard07766f22005-09-06 15:18:40 -070038#include <linux/compiler.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070039
40/*
41 * This file describes an interface to an IPMI driver. You have to
42 * have a fairly good understanding of IPMI to use this, so go read
43 * the specs first before actually trying to do anything.
44 *
45 * With that said, this driver provides a multi-user interface to the
46 * IPMI driver, and it allows multiple IPMI physical interfaces below
47 * the driver. The physical interfaces bind as a lower layer on the
48 * driver. They appear as interfaces to the application using this
49 * interface.
50 *
51 * Multi-user means that multiple applications may use the driver,
52 * send commands, receive responses, etc. The driver keeps track of
53 * commands the user sends and tracks the responses. The responses
54 * will go back to the application that send the command. If the
55 * response doesn't come back in time, the driver will return a
56 * timeout error response to the application. Asynchronous events
57 * from the BMC event queue will go to all users bound to the driver.
58 * The incoming event queue in the BMC will automatically be flushed
59 * if it becomes full and it is queried once a second to see if
60 * anything is in it. Incoming commands to the driver will get
61 * delivered as commands.
62 *
63 * This driver provides two main interfaces: one for in-kernel
64 * applications and another for userland applications. The
65 * capabilities are basically the same for both interface, although
66 * the interfaces are somewhat different. The stuff in the
Robert P. J. Day66ec2d72008-04-29 01:01:14 -070067 * #ifdef __KERNEL__ below is the in-kernel interface. The userland
Linus Torvalds1da177e2005-04-16 15:20:36 -070068 * interface is defined later in the file. */
69
70
71
72/*
73 * This is an overlay for all the address types, so it's easy to
74 * determine the actual address type. This is kind of like addresses
75 * work for sockets.
76 */
77#define IPMI_MAX_ADDR_SIZE 32
Corey Minyardc70d7492008-04-29 01:01:09 -070078struct ipmi_addr {
Linus Torvalds1da177e2005-04-16 15:20:36 -070079 /* Try to take these from the "Channel Medium Type" table
80 in section 6.5 of the IPMI 1.5 manual. */
81 int addr_type;
82 short channel;
83 char data[IPMI_MAX_ADDR_SIZE];
84};
85
86/*
87 * When the address is not used, the type will be set to this value.
88 * The channel is the BMC's channel number for the channel (usually
89 * 0), or IPMC_BMC_CHANNEL if communicating directly with the BMC.
90 */
91#define IPMI_SYSTEM_INTERFACE_ADDR_TYPE 0x0c
Corey Minyardc70d7492008-04-29 01:01:09 -070092struct ipmi_system_interface_addr {
Linus Torvalds1da177e2005-04-16 15:20:36 -070093 int addr_type;
94 short channel;
95 unsigned char lun;
96};
97
98/* An IPMB Address. */
99#define IPMI_IPMB_ADDR_TYPE 0x01
100/* Used for broadcast get device id as described in section 17.9 of the
Corey Minyardc70d7492008-04-29 01:01:09 -0700101 IPMI 1.5 manual. */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700102#define IPMI_IPMB_BROADCAST_ADDR_TYPE 0x41
Corey Minyardc70d7492008-04-29 01:01:09 -0700103struct ipmi_ipmb_addr {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700104 int addr_type;
105 short channel;
106 unsigned char slave_addr;
107 unsigned char lun;
108};
109
110/*
111 * A LAN Address. This is an address to/from a LAN interface bridged
112 * by the BMC, not an address actually out on the LAN.
113 *
114 * A concious decision was made here to deviate slightly from the IPMI
115 * spec. We do not use rqSWID and rsSWID like it shows in the
116 * message. Instead, we use remote_SWID and local_SWID. This means
117 * that any message (a request or response) from another device will
118 * always have exactly the same address. If you didn't do this,
119 * requests and responses from the same device would have different
120 * addresses, and that's not too cool.
121 *
122 * In this address, the remote_SWID is always the SWID the remote
123 * message came from, or the SWID we are sending the message to.
124 * local_SWID is always our SWID. Note that having our SWID in the
125 * message is a little weird, but this is required.
126 */
127#define IPMI_LAN_ADDR_TYPE 0x04
Corey Minyardc70d7492008-04-29 01:01:09 -0700128struct ipmi_lan_addr {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700129 int addr_type;
130 short channel;
131 unsigned char privilege;
132 unsigned char session_handle;
133 unsigned char remote_SWID;
134 unsigned char local_SWID;
135 unsigned char lun;
136};
137
138
139/*
140 * Channel for talking directly with the BMC. When using this
141 * channel, This is for the system interface address type only. FIXME
142 * - is this right, or should we use -1?
143 */
144#define IPMI_BMC_CHANNEL 0xf
145#define IPMI_NUM_CHANNELS 0x10
146
Corey Minyardc69c3122006-09-30 23:27:56 -0700147/*
148 * Used to signify an "all channel" bitmask. This is more than the
149 * actual number of channels because this is used in userland and
150 * will cover us if the number of channels is extended.
151 */
152#define IPMI_CHAN_ALL (~0)
153
Linus Torvalds1da177e2005-04-16 15:20:36 -0700154
155/*
156 * A raw IPMI message without any addressing. This covers both
157 * commands and responses. The completion code is always the first
158 * byte of data in the response (as the spec shows the messages laid
159 * out).
160 */
Corey Minyardc70d7492008-04-29 01:01:09 -0700161struct ipmi_msg {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700162 unsigned char netfn;
163 unsigned char cmd;
164 unsigned short data_len;
165 unsigned char __user *data;
166};
167
Corey Minyardc70d7492008-04-29 01:01:09 -0700168struct kernel_ipmi_msg {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700169 unsigned char netfn;
170 unsigned char cmd;
171 unsigned short data_len;
172 unsigned char *data;
173};
174
175/*
176 * Various defines that are useful for IPMI applications.
177 */
178#define IPMI_INVALID_CMD_COMPLETION_CODE 0xC1
179#define IPMI_TIMEOUT_COMPLETION_CODE 0xC3
180#define IPMI_UNKNOWN_ERR_COMPLETION_CODE 0xff
181
182
183/*
184 * Receive types for messages coming from the receive interface. This
185 * is used for the receive in-kernel interface and in the receive
186 * IOCTL.
187 *
188 * The "IPMI_RESPONSE_RESPNOSE_TYPE" is a little strange sounding, but
189 * it allows you to get the message results when you send a response
190 * message.
191 */
192#define IPMI_RESPONSE_RECV_TYPE 1 /* A response to a command */
193#define IPMI_ASYNC_EVENT_RECV_TYPE 2 /* Something from the event queue */
194#define IPMI_CMD_RECV_TYPE 3 /* A command from somewhere else */
195#define IPMI_RESPONSE_RESPONSE_TYPE 4 /* The response for
196 a sent response, giving any
197 error status for sending the
198 response. When you send a
199 response message, this will
200 be returned. */
201/* Note that async events and received commands do not have a completion
202 code as the first byte of the incoming data, unlike a response. */
203
204
Corey Minyardb9675132006-12-06 20:41:02 -0800205/*
206 * Modes for ipmi_set_maint_mode() and the userland IOCTL. The AUTO
207 * setting is the default and means it will be set on certain
208 * commands. Hard setting it on and off will override automatic
209 * operation.
210 */
211#define IPMI_MAINTENANCE_MODE_AUTO 0
212#define IPMI_MAINTENANCE_MODE_OFF 1
213#define IPMI_MAINTENANCE_MODE_ON 2
Linus Torvalds1da177e2005-04-16 15:20:36 -0700214
215#ifdef __KERNEL__
216
217/*
218 * The in-kernel interface.
219 */
220#include <linux/list.h>
221#include <linux/module.h>
David Woodhouse2e0e1f92006-04-25 14:15:44 +0100222#include <linux/device.h>
Corey Minyard3b625942005-06-23 22:01:42 -0700223#include <linux/proc_fs.h>
Corey Minyard3b625942005-06-23 22:01:42 -0700224
Linus Torvalds1da177e2005-04-16 15:20:36 -0700225/* Opaque type for a IPMI message user. One of these is needed to
226 send and receive messages. */
227typedef struct ipmi_user *ipmi_user_t;
228
229/*
230 * Stuff coming from the receive interface comes as one of these.
231 * They are allocated, the receiver must free them with
232 * ipmi_free_recv_msg() when done with the message. The link is not
233 * used after the message is delivered, so the upper layer may use the
234 * link to build a linked list, if it likes.
235 */
Corey Minyardc70d7492008-04-29 01:01:09 -0700236struct ipmi_recv_msg {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700237 struct list_head link;
238
239 /* The type of message as defined in the "Receive Types"
Corey Minyardc70d7492008-04-29 01:01:09 -0700240 defines above. */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700241 int recv_type;
242
243 ipmi_user_t user;
244 struct ipmi_addr addr;
245 long msgid;
246 struct kernel_ipmi_msg msg;
247
248 /* The user_msg_data is the data supplied when a message was
249 sent, if this is a response to a sent message. If this is
250 not a response to a sent message, then user_msg_data will
Corey Minyard56a55ec2005-09-06 15:18:42 -0700251 be NULL. If the user above is NULL, then this will be the
252 intf. */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700253 void *user_msg_data;
254
255 /* Call this when done with the message. It will presumably free
256 the message and do any other necessary cleanup. */
257 void (*done)(struct ipmi_recv_msg *msg);
258
259 /* Place-holder for the data, don't make any assumptions about
260 the size or existance of this, since it may change. */
261 unsigned char msg_data[IPMI_MAX_MSG_LENGTH];
262};
263
264/* Allocate and free the receive message. */
Corey Minyard393d2cc2005-11-07 00:59:54 -0800265void ipmi_free_recv_msg(struct ipmi_recv_msg *msg);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700266
Corey Minyardc70d7492008-04-29 01:01:09 -0700267struct ipmi_user_hndl {
268 /* Routine type to call when a message needs to be routed to
Linus Torvalds1da177e2005-04-16 15:20:36 -0700269 the upper layer. This will be called with some locks held,
270 the only IPMI routines that can be called are ipmi_request
271 and the alloc/free operations. The handler_data is the
272 variable supplied when the receive handler was registered. */
273 void (*ipmi_recv_hndl)(struct ipmi_recv_msg *msg,
274 void *user_msg_data);
275
276 /* Called when the interface detects a watchdog pre-timeout. If
277 this is NULL, it will be ignored for the user. */
278 void (*ipmi_watchdog_pretimeout)(void *handler_data);
279};
280
281/* Create a new user of the IPMI layer on the given interface number. */
282int ipmi_create_user(unsigned int if_num,
283 struct ipmi_user_hndl *handler,
284 void *handler_data,
285 ipmi_user_t *user);
286
287/* Destroy the given user of the IPMI layer. Note that after this
288 function returns, the system is guaranteed to not call any
289 callbacks for the user. Thus as long as you destroy all the users
290 before you unload a module, you will be safe. And if you destroy
291 the users before you destroy the callback structures, it should be
292 safe, too. */
293int ipmi_destroy_user(ipmi_user_t user);
294
295/* Get the IPMI version of the BMC we are talking to. */
296void ipmi_get_version(ipmi_user_t user,
297 unsigned char *major,
298 unsigned char *minor);
299
300/* Set and get the slave address and LUN that we will use for our
301 source messages. Note that this affects the interface, not just
302 this user, so it will affect all users of this interface. This is
303 so some initialization code can come in and do the OEM-specific
304 things it takes to determine your address (if not the BMC) and set
Corey Minyardc14979b2005-09-06 15:18:38 -0700305 it for everyone else. Note that each channel can have its own address. */
306int ipmi_set_my_address(ipmi_user_t user,
307 unsigned int channel,
308 unsigned char address);
309int ipmi_get_my_address(ipmi_user_t user,
310 unsigned int channel,
311 unsigned char *address);
312int ipmi_set_my_LUN(ipmi_user_t user,
313 unsigned int channel,
314 unsigned char LUN);
315int ipmi_get_my_LUN(ipmi_user_t user,
316 unsigned int channel,
317 unsigned char *LUN);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700318
319/*
320 * Like ipmi_request, but lets you specify the number of retries and
321 * the retry time. The retries is the number of times the message
322 * will be resent if no reply is received. If set to -1, the default
323 * value will be used. The retry time is the time in milliseconds
324 * between retries. If set to zero, the default value will be
325 * used.
326 *
327 * Don't use this unless you *really* have to. It's primarily for the
328 * IPMI over LAN converter; since the LAN stuff does its own retries,
329 * it makes no sense to do it here. However, this can be used if you
330 * have unusual requirements.
331 */
332int ipmi_request_settime(ipmi_user_t user,
333 struct ipmi_addr *addr,
334 long msgid,
335 struct kernel_ipmi_msg *msg,
336 void *user_msg_data,
337 int priority,
338 int max_retries,
339 unsigned int retry_time_ms);
340
341/*
342 * Like ipmi_request, but with messages supplied. This will not
343 * allocate any memory, and the messages may be statically allocated
344 * (just make sure to do the "done" handling on them). Note that this
345 * is primarily for the watchdog timer, since it should be able to
346 * send messages even if no memory is available. This is subject to
347 * change as the system changes, so don't use it unless you REALLY
348 * have to.
349 */
350int ipmi_request_supply_msgs(ipmi_user_t user,
351 struct ipmi_addr *addr,
352 long msgid,
353 struct kernel_ipmi_msg *msg,
354 void *user_msg_data,
355 void *supplied_smi,
356 struct ipmi_recv_msg *supplied_recv,
357 int priority);
358
359/*
Corey Minyardfcfa4722007-10-18 03:07:09 -0700360 * Poll the IPMI interface for the user. This causes the IPMI code to
361 * do an immediate check for information from the driver and handle
362 * anything that is immediately pending. This will not block in any
Corey Minyardbda4c302008-04-29 01:01:02 -0700363 * way. This is useful if you need to spin waiting for something to
364 * happen in the IPMI driver.
Corey Minyardfcfa4722007-10-18 03:07:09 -0700365 */
366void ipmi_poll_interface(ipmi_user_t user);
367
368/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700369 * When commands come in to the SMS, the user can register to receive
Corey Minyardc69c3122006-09-30 23:27:56 -0700370 * them. Only one user can be listening on a specific netfn/cmd/chan tuple
Linus Torvalds1da177e2005-04-16 15:20:36 -0700371 * at a time, you will get an EBUSY error if the command is already
372 * registered. If a command is received that does not have a user
373 * registered, the driver will automatically return the proper
Corey Minyardc69c3122006-09-30 23:27:56 -0700374 * error. Channels are specified as a bitfield, use IPMI_CHAN_ALL to
375 * mean all channels.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700376 */
377int ipmi_register_for_cmd(ipmi_user_t user,
378 unsigned char netfn,
Corey Minyardc69c3122006-09-30 23:27:56 -0700379 unsigned char cmd,
380 unsigned int chans);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700381int ipmi_unregister_for_cmd(ipmi_user_t user,
382 unsigned char netfn,
Corey Minyardc69c3122006-09-30 23:27:56 -0700383 unsigned char cmd,
384 unsigned int chans);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700385
386/*
Corey Minyardb9675132006-12-06 20:41:02 -0800387 * Go into a mode where the driver will not autonomously attempt to do
388 * things with the interface. It will still respond to attentions and
389 * interrupts, and it will expect that commands will complete. It
390 * will not automatcially check for flags, events, or things of that
391 * nature.
392 *
393 * This is primarily used for firmware upgrades. The idea is that
394 * when you go into firmware upgrade mode, you do this operation
395 * and the driver will not attempt to do anything but what you tell
396 * it or what the BMC asks for.
397 *
398 * Note that if you send a command that resets the BMC, the driver
399 * will still expect a response from that command. So the BMC should
400 * reset itself *after* the response is sent. Resetting before the
401 * response is just silly.
402 *
403 * If in auto maintenance mode, the driver will automatically go into
404 * maintenance mode for 30 seconds if it sees a cold reset, a warm
405 * reset, or a firmware NetFN. This means that code that uses only
406 * firmware NetFN commands to do upgrades will work automatically
407 * without change, assuming it sends a message every 30 seconds or
408 * less.
409 *
410 * See the IPMI_MAINTENANCE_MODE_xxx defines for what the mode means.
411 */
412int ipmi_get_maintenance_mode(ipmi_user_t user);
413int ipmi_set_maintenance_mode(ipmi_user_t user, int mode);
414
415/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700416 * When the user is created, it will not receive IPMI events by
417 * default. The user must set this to TRUE to get incoming events.
418 * The first user that sets this to TRUE will receive all events that
419 * have been queued while no one was waiting for events.
420 */
421int ipmi_set_gets_events(ipmi_user_t user, int val);
422
423/*
424 * Called when a new SMI is registered. This will also be called on
425 * every existing interface when a new watcher is registered with
426 * ipmi_smi_watcher_register().
427 */
Corey Minyardc70d7492008-04-29 01:01:09 -0700428struct ipmi_smi_watcher {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700429 struct list_head link;
430
431 /* You must set the owner to the current module, if you are in
432 a module (generally just set it to "THIS_MODULE"). */
433 struct module *owner;
434
435 /* These two are called with read locks held for the interface
436 the watcher list. So you can add and remove users from the
437 IPMI interface, send messages, etc., but you cannot add
438 or remove SMI watchers or SMI interfaces. */
Corey Minyard50c812b2006-03-26 01:37:21 -0800439 void (*new_smi)(int if_num, struct device *dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700440 void (*smi_gone)(int if_num);
441};
442
443int ipmi_smi_watcher_register(struct ipmi_smi_watcher *watcher);
444int ipmi_smi_watcher_unregister(struct ipmi_smi_watcher *watcher);
445
446/* The following are various helper functions for dealing with IPMI
447 addresses. */
448
449/* Return the maximum length of an IPMI address given it's type. */
450unsigned int ipmi_addr_length(int addr_type);
451
452/* Validate that the given IPMI address is valid. */
453int ipmi_validate_addr(struct ipmi_addr *addr, int len);
454
455#endif /* __KERNEL__ */
456
457
458/*
459 * The userland interface
460 */
461
462/*
463 * The userland interface for the IPMI driver is a standard character
464 * device, with each instance of an interface registered as a minor
465 * number under the major character device.
466 *
467 * The read and write calls do not work, to get messages in and out
468 * requires ioctl calls because of the complexity of the data. select
469 * and poll do work, so you can wait for input using the file
470 * descriptor, you just can use read to get it.
471 *
472 * In general, you send a command down to the interface and receive
473 * responses back. You can use the msgid value to correlate commands
474 * and responses, the driver will take care of figuring out which
475 * incoming messages are for which command and find the proper msgid
476 * value to report. You will only receive reponses for commands you
477 * send. Asynchronous events, however, go to all open users, so you
478 * must be ready to handle these (or ignore them if you don't care).
479 *
480 * The address type depends upon the channel type. When talking
481 * directly to the BMC (IPMC_BMC_CHANNEL), the address is ignored
482 * (IPMI_UNUSED_ADDR_TYPE). When talking to an IPMB channel, you must
483 * supply a valid IPMB address with the addr_type set properly.
484 *
485 * When talking to normal channels, the driver takes care of the
486 * details of formatting and sending messages on that channel. You do
487 * not, for instance, have to format a send command, you just send
488 * whatever command you want to the channel, the driver will create
489 * the send command, automatically issue receive command and get even
490 * commands, and pass those up to the proper user.
491 */
492
493
494/* The magic IOCTL value for this interface. */
495#define IPMI_IOC_MAGIC 'i'
496
497
498/* Messages sent to the interface are this format. */
Corey Minyardc70d7492008-04-29 01:01:09 -0700499struct ipmi_req {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700500 unsigned char __user *addr; /* Address to send the message to. */
501 unsigned int addr_len;
502
503 long msgid; /* The sequence number for the message. This
504 exact value will be reported back in the
505 response to this request if it is a command.
506 If it is a response, this will be used as
507 the sequence value for the response. */
508
509 struct ipmi_msg msg;
510};
511/*
512 * Send a message to the interfaces. error values are:
513 * - EFAULT - an address supplied was invalid.
514 * - EINVAL - The address supplied was not valid, or the command
515 * was not allowed.
516 * - EMSGSIZE - The message to was too large.
517 * - ENOMEM - Buffers could not be allocated for the command.
518 */
519#define IPMICTL_SEND_COMMAND _IOR(IPMI_IOC_MAGIC, 13, \
520 struct ipmi_req)
521
522/* Messages sent to the interface with timing parameters are this
523 format. */
Corey Minyardc70d7492008-04-29 01:01:09 -0700524struct ipmi_req_settime {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700525 struct ipmi_req req;
526
527 /* See ipmi_request_settime() above for details on these
Corey Minyardc70d7492008-04-29 01:01:09 -0700528 values. */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700529 int retries;
530 unsigned int retry_time_ms;
531};
532/*
533 * Send a message to the interfaces with timing parameters. error values
534 * are:
535 * - EFAULT - an address supplied was invalid.
536 * - EINVAL - The address supplied was not valid, or the command
537 * was not allowed.
538 * - EMSGSIZE - The message to was too large.
539 * - ENOMEM - Buffers could not be allocated for the command.
540 */
541#define IPMICTL_SEND_COMMAND_SETTIME _IOR(IPMI_IOC_MAGIC, 21, \
542 struct ipmi_req_settime)
543
544/* Messages received from the interface are this format. */
Corey Minyardc70d7492008-04-29 01:01:09 -0700545struct ipmi_recv {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700546 int recv_type; /* Is this a command, response or an
547 asyncronous event. */
548
549 unsigned char __user *addr; /* Address the message was from is put
550 here. The caller must supply the
551 memory. */
552 unsigned int addr_len; /* The size of the address buffer.
553 The caller supplies the full buffer
554 length, this value is updated to
555 the actual message length when the
556 message is received. */
557
558 long msgid; /* The sequence number specified in the request
559 if this is a response. If this is a command,
560 this will be the sequence number from the
561 command. */
562
563 struct ipmi_msg msg; /* The data field must point to a buffer.
564 The data_size field must be set to the
565 size of the message buffer. The
566 caller supplies the full buffer
567 length, this value is updated to the
568 actual message length when the message
569 is received. */
570};
571
572/*
573 * Receive a message. error values:
574 * - EAGAIN - no messages in the queue.
575 * - EFAULT - an address supplied was invalid.
576 * - EINVAL - The address supplied was not valid.
577 * - EMSGSIZE - The message to was too large to fit into the message buffer,
578 * the message will be left in the buffer. */
579#define IPMICTL_RECEIVE_MSG _IOWR(IPMI_IOC_MAGIC, 12, \
580 struct ipmi_recv)
581
582/*
583 * Like RECEIVE_MSG, but if the message won't fit in the buffer, it
584 * will truncate the contents instead of leaving the data in the
585 * buffer.
586 */
587#define IPMICTL_RECEIVE_MSG_TRUNC _IOWR(IPMI_IOC_MAGIC, 11, \
588 struct ipmi_recv)
589
590/* Register to get commands from other entities on this interface. */
Corey Minyardc70d7492008-04-29 01:01:09 -0700591struct ipmi_cmdspec {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700592 unsigned char netfn;
593 unsigned char cmd;
594};
595
Corey Minyardc70d7492008-04-29 01:01:09 -0700596/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700597 * Register to receive a specific command. error values:
598 * - EFAULT - an address supplied was invalid.
599 * - EBUSY - The netfn/cmd supplied was already in use.
600 * - ENOMEM - could not allocate memory for the entry.
601 */
602#define IPMICTL_REGISTER_FOR_CMD _IOR(IPMI_IOC_MAGIC, 14, \
603 struct ipmi_cmdspec)
604/*
605 * Unregister a regsitered command. error values:
606 * - EFAULT - an address supplied was invalid.
607 * - ENOENT - The netfn/cmd was not found registered for this user.
608 */
609#define IPMICTL_UNREGISTER_FOR_CMD _IOR(IPMI_IOC_MAGIC, 15, \
610 struct ipmi_cmdspec)
611
Corey Minyardc69c3122006-09-30 23:27:56 -0700612/*
613 * Register to get commands from other entities on specific channels.
614 * This way, you can only listen on specific channels, or have messages
615 * from some channels go to one place and other channels to someplace
616 * else. The chans field is a bitmask, (1 << channel) for each channel.
617 * It may be IPMI_CHAN_ALL for all channels.
618 */
Corey Minyardc70d7492008-04-29 01:01:09 -0700619struct ipmi_cmdspec_chans {
Corey Minyardc69c3122006-09-30 23:27:56 -0700620 unsigned int netfn;
621 unsigned int cmd;
622 unsigned int chans;
623};
624
625/*
626 * Register to receive a specific command on specific channels. error values:
627 * - EFAULT - an address supplied was invalid.
628 * - EBUSY - One of the netfn/cmd/chans supplied was already in use.
629 * - ENOMEM - could not allocate memory for the entry.
630 */
631#define IPMICTL_REGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 28, \
632 struct ipmi_cmdspec_chans)
633/*
634 * Unregister some netfn/cmd/chans. error values:
635 * - EFAULT - an address supplied was invalid.
636 * - ENOENT - None of the netfn/cmd/chans were found registered for this user.
637 */
638#define IPMICTL_UNREGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 29, \
639 struct ipmi_cmdspec_chans)
640
Corey Minyardc70d7492008-04-29 01:01:09 -0700641/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700642 * Set whether this interface receives events. Note that the first
643 * user registered for events will get all pending events for the
644 * interface. error values:
645 * - EFAULT - an address supplied was invalid.
646 */
647#define IPMICTL_SET_GETS_EVENTS_CMD _IOR(IPMI_IOC_MAGIC, 16, int)
648
649/*
650 * Set and get the slave address and LUN that we will use for our
651 * source messages. Note that this affects the interface, not just
652 * this user, so it will affect all users of this interface. This is
653 * so some initialization code can come in and do the OEM-specific
654 * things it takes to determine your address (if not the BMC) and set
655 * it for everyone else. You should probably leave the LUN alone.
656 */
Corey Minyardc70d7492008-04-29 01:01:09 -0700657struct ipmi_channel_lun_address_set {
Corey Minyardc14979b2005-09-06 15:18:38 -0700658 unsigned short channel;
659 unsigned char value;
660};
Corey Minyardc70d7492008-04-29 01:01:09 -0700661#define IPMICTL_SET_MY_CHANNEL_ADDRESS_CMD \
662 _IOR(IPMI_IOC_MAGIC, 24, struct ipmi_channel_lun_address_set)
663#define IPMICTL_GET_MY_CHANNEL_ADDRESS_CMD \
664 _IOR(IPMI_IOC_MAGIC, 25, struct ipmi_channel_lun_address_set)
665#define IPMICTL_SET_MY_CHANNEL_LUN_CMD \
666 _IOR(IPMI_IOC_MAGIC, 26, struct ipmi_channel_lun_address_set)
667#define IPMICTL_GET_MY_CHANNEL_LUN_CMD \
668 _IOR(IPMI_IOC_MAGIC, 27, struct ipmi_channel_lun_address_set)
Corey Minyardc14979b2005-09-06 15:18:38 -0700669/* Legacy interfaces, these only set IPMB 0. */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700670#define IPMICTL_SET_MY_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 17, unsigned int)
671#define IPMICTL_GET_MY_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 18, unsigned int)
672#define IPMICTL_SET_MY_LUN_CMD _IOR(IPMI_IOC_MAGIC, 19, unsigned int)
673#define IPMICTL_GET_MY_LUN_CMD _IOR(IPMI_IOC_MAGIC, 20, unsigned int)
674
675/*
676 * Get/set the default timing values for an interface. You shouldn't
677 * generally mess with these.
678 */
Corey Minyardc70d7492008-04-29 01:01:09 -0700679struct ipmi_timing_parms {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700680 int retries;
681 unsigned int retry_time_ms;
682};
683#define IPMICTL_SET_TIMING_PARMS_CMD _IOR(IPMI_IOC_MAGIC, 22, \
684 struct ipmi_timing_parms)
685#define IPMICTL_GET_TIMING_PARMS_CMD _IOR(IPMI_IOC_MAGIC, 23, \
686 struct ipmi_timing_parms)
687
Corey Minyardb9675132006-12-06 20:41:02 -0800688/*
689 * Set the maintenance mode. See ipmi_set_maintenance_mode() above
690 * for a description of what this does.
691 */
692#define IPMICTL_GET_MAINTENANCE_MODE_CMD _IOR(IPMI_IOC_MAGIC, 30, int)
693#define IPMICTL_SET_MAINTENANCE_MODE_CMD _IOW(IPMI_IOC_MAGIC, 31, int)
694
Linus Torvalds1da177e2005-04-16 15:20:36 -0700695#endif /* __LINUX_IPMI_H */