blob: 8fb46aab2d87d5bf85ddc2a1b68ca38341bcb058 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# IDE ATA ATAPI Block device driver configuration
3#
Linus Torvalds1da177e2005-04-16 15:20:36 -07004
Sam Ravnborgec7748b2008-02-09 10:46:40 +01005# Select HAVE_IDE if IDE is supported
6config HAVE_IDE
Jan Beulich9ba16082008-10-15 22:01:38 -07007 bool
Sam Ravnborgec7748b2008-02-09 10:46:40 +01008
Jan Engelhardte0ff9cd2007-05-16 00:51:46 +02009menuconfig IDE
Robert Hancock73ba3232009-10-26 15:41:32 +000010 tristate "ATA/ATAPI/MFM/RLL support (DEPRECATED)"
Sam Ravnborgec7748b2008-02-09 10:46:40 +010011 depends on HAVE_IDE
Jan Engelhardte0ff9cd2007-05-16 00:51:46 +020012 depends on BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -070013 ---help---
Robert Hancock73ba3232009-10-26 15:41:32 +000014 If you say Y here, your kernel will be able to manage ATA/(E)IDE and
15 ATAPI units. The most common cases are IDE hard drives and ATAPI
16 CD-ROM drives.
Linus Torvalds1da177e2005-04-16 15:20:36 -070017
Robert Hancock73ba3232009-10-26 15:41:32 +000018 This subsystem is currently in maintenance mode with only bug fix
19 changes applied. Users of ATA hardware are encouraged to migrate to
20 the newer ATA subsystem ("Serial ATA (prod) and Parallel ATA
21 (experimental) drivers") which is more actively maintained.
Linus Torvalds1da177e2005-04-16 15:20:36 -070022
23 To compile this driver as a module, choose M here: the
Pavel Machek4737f092009-06-05 00:44:53 +020024 module will be called ide-core.
Linus Torvalds1da177e2005-04-16 15:20:36 -070025
Randy Dunlap1c10e932008-03-07 21:53:50 +010026 For further information, please read <file:Documentation/ide/ide.txt>.
Linus Torvalds1da177e2005-04-16 15:20:36 -070027
Robert Hancock73ba3232009-10-26 15:41:32 +000028 If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -070029
30if IDE
31
Randy Dunlap1c10e932008-03-07 21:53:50 +010032comment "Please see Documentation/ide/ide.txt for help/info on IDE drives"
Linus Torvalds1da177e2005-04-16 15:20:36 -070033
Bartlomiej Zolnierkiewicz7eeaaaa2009-03-24 23:22:46 +010034config IDE_XFER_MODE
35 bool
36
Bartlomiej Zolnierkiewiczf06ab342008-07-16 20:33:37 +020037config IDE_TIMINGS
38 bool
Bartlomiej Zolnierkiewicz7eeaaaa2009-03-24 23:22:46 +010039 select IDE_XFER_MODE
Bartlomiej Zolnierkiewiczf06ab342008-07-16 20:33:37 +020040
Bartlomiej Zolnierkiewicz594c16d2008-07-15 21:21:58 +020041config IDE_ATAPI
42 bool
43
Bartlomiej Zolnierkiewicz7f92b112008-12-29 20:27:37 +010044config IDE_LEGACY
45 bool
46
Linus Torvalds1da177e2005-04-16 15:20:36 -070047config BLK_DEV_IDE_SATA
48 bool "Support for SATA (deprecated; conflicts with libata SATA driver)"
49 default n
50 ---help---
51 There are two drivers for Serial ATA controllers.
52
Patrick Ringlb43c5f32007-03-26 23:03:19 +020053 The main driver, "libata", uses the SCSI subsystem
54 and supports most modern SATA controllers. In order to use it
55 you may take a look at "Serial ATA (prod) and Parallel ATA
56 (experimental) drivers".
Linus Torvalds1da177e2005-04-16 15:20:36 -070057
58 The IDE driver (which you are currently configuring) supports
59 a few first-generation SATA controllers.
60
61 In order to eliminate conflicts between the two subsystems,
62 this config option enables the IDE driver's SATA support.
63 Normally this is disabled, as it is preferred that libata
64 supports SATA controllers, and this (IDE) driver supports
65 PATA controllers.
66
67 If unsure, say N.
68
Bartlomiej Zolnierkiewicz806f80a2008-10-17 18:09:14 +020069config IDE_GD
70 tristate "generic ATA/ATAPI disk support"
71 default y
72 help
73 Support for ATA/ATAPI disks (including ATAPI floppy drives).
Linus Torvalds1da177e2005-04-16 15:20:36 -070074
Bartlomiej Zolnierkiewicz806f80a2008-10-17 18:09:14 +020075 To compile this driver as a module, choose M here.
76 The module will be called ide-gd_mod.
Linus Torvalds1da177e2005-04-16 15:20:36 -070077
78 If unsure, say Y.
79
Bartlomiej Zolnierkiewicz806f80a2008-10-17 18:09:14 +020080config IDE_GD_ATA
81 bool "ATA disk support"
82 depends on IDE_GD
83 default y
84 help
85 This will include support for ATA hard disks.
86
87 If unsure, say Y.
88
89config IDE_GD_ATAPI
90 bool "ATAPI floppy support"
91 depends on IDE_GD
92 select IDE_ATAPI
93 help
94 This will include support for ATAPI floppy drives
95 (i.e. Iomega ZIP or MKE LS-120).
96
97 For information about jumper settings and the question
98 of when a ZIP drive uses a partition table, see
99 <http://www.win.tue.nl/~aeb/linux/zip/zip-1.html>.
100
101 If unsure, say N.
102
Linus Torvalds1da177e2005-04-16 15:20:36 -0700103config BLK_DEV_IDECS
104 tristate "PCMCIA IDE support"
105 depends on PCMCIA
106 help
Andreas Mohr3b6ce242006-02-03 03:04:54 -0800107 Support for Compact Flash cards, outboard IDE disks, tape drives,
108 and CD-ROM drives connected through a PCMCIA card.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700109
Mark Lord78281c52007-02-07 18:19:32 +0100110config BLK_DEV_DELKIN
111 tristate "Cardbus IDE support (Delkin/ASKA/Workbit)"
112 depends on CARDBUS && PCI
113 help
114 Support for Delkin, ASKA, and Workbit Cardbus CompactFlash
115 Adapters. This may also work for similar SD and XD adapters.
116
Linus Torvalds1da177e2005-04-16 15:20:36 -0700117config BLK_DEV_IDECD
118 tristate "Include IDE/ATAPI CDROM support"
Borislav Petkov392de1d2009-01-02 16:12:52 +0100119 select IDE_ATAPI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700120 ---help---
121 If you have a CD-ROM drive using the ATAPI protocol, say Y. ATAPI is
122 a newer protocol used by IDE CD-ROM and TAPE drives, similar to the
123 SCSI protocol. Most new CD-ROM drives use ATAPI, including the
124 NEC-260, Mitsumi FX400, Sony 55E, and just about all non-SCSI
125 double(2X) or better speed drives.
126
127 If you say Y here, the CD-ROM drive will be identified at boot time
128 along with other IDE devices, as "hdb" or "hdc", or something
129 similar (check the boot messages with dmesg). If this is your only
130 CD-ROM drive, you can say N to all other CD-ROM options, but be sure
131 to say Y or M to "ISO 9660 CD-ROM file system support".
132
Linus Torvalds1da177e2005-04-16 15:20:36 -0700133 To compile this driver as a module, choose M here: the
134 module will be called ide-cd.
135
Bartlomiej Zolnierkiewicz972560f2008-02-01 23:09:23 +0100136config BLK_DEV_IDECD_VERBOSE_ERRORS
David Rientjes6a108a12011-01-20 14:44:16 -0800137 bool "Verbose error logging for IDE/ATAPI CDROM driver" if EXPERT
Bartlomiej Zolnierkiewicz972560f2008-02-01 23:09:23 +0100138 depends on BLK_DEV_IDECD
139 default y
140 help
141 Turn this on to have the driver print out the meanings of the
142 ATAPI error codes. This will use up additional 8kB of kernel-space
143 memory, though.
144
Linus Torvalds1da177e2005-04-16 15:20:36 -0700145config BLK_DEV_IDETAPE
Borislav Petkov4278c2d2008-02-02 19:56:50 +0100146 tristate "Include IDE/ATAPI TAPE support"
Bartlomiej Zolnierkiewicz594c16d2008-07-15 21:21:58 +0200147 select IDE_ATAPI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700148 help
149 If you have an IDE tape drive using the ATAPI protocol, say Y.
150 ATAPI is a newer protocol used by IDE tape and CD-ROM drives,
151 similar to the SCSI protocol. If you have an SCSI tape drive
152 however, you can say N here.
153
154 You should also say Y if you have an OnStream DI-30 tape drive; this
155 will not work with the SCSI protocol, until there is support for the
156 SC-30 and SC-50 versions.
157
158 If you say Y here, the tape drive will be identified at boot time
159 along with other IDE devices, as "hdb" or "hdc", or something
160 similar, and will be mapped to a character device such as "ht0"
161 (check the boot messages with dmesg). Be sure to consult the
Randy Dunlap1c10e932008-03-07 21:53:50 +0100162 <file:drivers/ide/ide-tape.c> and <file:Documentation/ide/ide.txt>
163 files for usage information.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700164
165 To compile this driver as a module, choose M here: the
166 module will be called ide-tape.
167
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100168config BLK_DEV_IDEACPI
169 bool "IDE ACPI support"
170 depends on ACPI
171 ---help---
172 Implement ACPI support for generic IDE devices. On modern
173 machines ACPI support is required to properly handle ACPI S3 states.
174
Linus Torvalds1da177e2005-04-16 15:20:36 -0700175config IDE_TASK_IOCTL
176 bool "IDE Taskfile Access"
177 help
178 This is a direct raw access to the media. It is a complex but
179 elegant solution to test and validate the domain of the hardware and
Andreas Mohr3b6ce242006-02-03 03:04:54 -0800180 perform below the driver data recovery if needed. This is the most
Linus Torvalds1da177e2005-04-16 15:20:36 -0700181 basic form of media-forensics.
182
183 If you are unsure, say N here.
184
Bartlomiej Zolnierkiewiczecfd80e2007-05-10 00:01:09 +0200185config IDE_PROC_FS
186 bool "legacy /proc/ide/ support"
187 depends on IDE && PROC_FS
188 default y
189 help
190 This option enables support for the various files in
191 /proc/ide. In Linux 2.6 this has been superseded by
192 files in sysfs but many legacy applications rely on this.
193
194 If unsure say Y.
195
Linus Torvalds1da177e2005-04-16 15:20:36 -0700196comment "IDE chipset support/bugfixes"
197
198config IDE_GENERIC
199 tristate "generic/default IDE chipset support"
Linus Walleijf4b24972013-09-03 11:45:43 +0200200 depends on ALPHA || X86 || IA64 || M32R || MIPS || ARCH_RPC
201 default ARM && ARCH_RPC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700202 help
Tejun Heo278ecfb2008-09-27 19:32:17 +0200203 This is the generic IDE driver. This driver attaches to the
204 fixed legacy ports (e.g. on PCs 0x1f0/0x170, 0x1e8/0x168 and
205 so on). Please note that if this driver is built into the
206 kernel or loaded before other ATA (IDE or libata) drivers
207 and the controller is located at legacy ports, this driver
208 may grab those ports and thus can prevent the controller
209 specific driver from attaching.
210
211 Also, currently, IDE generic doesn't allow IRQ sharing
212 meaning that the IRQs it grabs won't be available to other
213 controllers sharing those IRQs which usually makes drivers
214 for those controllers fail. Generally, it's not a good idea
215 to load IDE generic driver on modern systems.
216
Tejun Heo82a0e702007-08-20 22:42:53 +0200217 If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700218
Anton Vorontsov8cb1f562007-10-11 23:53:58 +0200219config BLK_DEV_PLATFORM
220 tristate "Platform driver for IDE interfaces"
221 help
222 This is the platform IDE driver, used mostly for Memory Mapped
223 IDE devices, like Compact Flashes running in True IDE mode.
224
225 If unsure, say N.
226
Linus Torvalds1da177e2005-04-16 15:20:36 -0700227config BLK_DEV_CMD640
Bartlomiej Zolnierkiewiczade2daf2008-01-26 20:13:07 +0100228 tristate "CMD640 chipset bugfix/support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700229 depends on X86
Bartlomiej Zolnierkiewicz17b500d2008-07-16 20:33:38 +0200230 select IDE_TIMINGS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700231 ---help---
232 The CMD-Technologies CMD640 IDE chip is used on many common 486 and
233 Pentium motherboards, usually in combination with a "Neptune" or
234 "SiS" chipset. Unfortunately, it has a number of rather nasty
235 design flaws that can cause severe data corruption under many common
236 conditions. Say Y here to include code which tries to automatically
237 detect and correct the problems under Linux. This option also
238 enables access to the secondary IDE ports in some CMD640 based
239 systems.
240
241 This driver will work automatically in PCI based systems (most new
242 systems have PCI slots). But if your system uses VESA local bus
243 (VLB) instead of PCI, you must also supply a kernel boot parameter
Bartlomiej Zolnierkiewicz64afc312008-05-14 23:06:16 +0200244 to enable the CMD640 bugfix/support: "cmd640.probe_vlb". (Try "man
Linus Torvalds1da177e2005-04-16 15:20:36 -0700245 bootparam" or see the documentation of your boot loader about how to
246 pass options to the kernel.)
247
248 The CMD640 chip is also used on add-in cards by Acculogic, and on
249 the "CSA-6400E PCI to IDE controller" that some people have. For
Randy Dunlap1c10e932008-03-07 21:53:50 +0100250 details, read <file:Documentation/ide/ide.txt>.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700251
252config BLK_DEV_CMD640_ENHANCED
253 bool "CMD640 enhanced support"
254 depends on BLK_DEV_CMD640
255 help
256 This option includes support for setting/autotuning PIO modes and
257 prefetch on CMD640 IDE interfaces. For details, read
Randy Dunlap1c10e932008-03-07 21:53:50 +0100258 <file:Documentation/ide/ide.txt>. If you have a CMD640 IDE interface
Linus Torvalds1da177e2005-04-16 15:20:36 -0700259 and your BIOS does not already do this for you, then say Y here.
260 Otherwise say N.
261
262config BLK_DEV_IDEPNP
Bartlomiej Zolnierkiewiczade2daf2008-01-26 20:13:07 +0100263 tristate "PNP EIDE support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700264 depends on PNP
265 help
266 If you have a PnP (Plug and Play) compatible EIDE card and
267 would like the kernel to automatically detect and activate
268 it, say Y here.
269
Sergei Shtylyov8e882ba2008-02-11 00:32:14 +0100270config BLK_DEV_IDEDMA_SFF
271 bool
272
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200273if PCI
274
275comment "PCI IDE chipsets support"
276
Linus Torvalds1da177e2005-04-16 15:20:36 -0700277config BLK_DEV_IDEPCI
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200278 bool
Linus Torvalds1da177e2005-04-16 15:20:36 -0700279
Bartlomiej Zolnierkiewicz6d208b32007-05-10 00:01:11 +0200280config IDEPCI_PCIBUS_ORDER
Bartlomiej Zolnierkiewiczce71ed92008-01-26 20:13:09 +0100281 bool "Probe IDE PCI devices in the PCI bus order (DEPRECATED)"
Bartlomiej Zolnierkiewicz452a8ed2008-10-13 21:39:33 +0200282 depends on IDE=y && BLK_DEV_IDEPCI
Bartlomiej Zolnierkiewiczce71ed92008-01-26 20:13:09 +0100283 default y
284 help
285 Probe IDE PCI devices in the order in which they appear on the
286 PCI bus (i.e. 00:1f.1 PCI device before 02:01.0 PCI device)
287 instead of the order in which IDE PCI host drivers are loaded.
288
289 Please note that this method of assuring stable naming of
290 IDE devices is unreliable and use other means for achieving
291 it (i.e. udev).
292
293 If in doubt, say N.
Bartlomiej Zolnierkiewicz6d208b32007-05-10 00:01:11 +0200294
Bartlomiej Zolnierkiewiczf7d7f3f2007-11-05 21:42:26 +0100295# TODO: split it on per host driver config options (or module parameters)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700296config BLK_DEV_OFFBOARD
Bartlomiej Zolnierkiewicz46255d42007-12-12 23:31:57 +0100297 bool "Boot off-board chipsets first support (DEPRECATED)"
Bartlomiej Zolnierkiewicz41d1a3d2008-10-17 18:09:16 +0200298 depends on BLK_DEV_IDEPCI && (BLK_DEV_AEC62XX || BLK_DEV_GENERIC || BLK_DEV_HPT366 || BLK_DEV_PDC202XX_NEW || BLK_DEV_PDC202XX_OLD || BLK_DEV_TC86C001)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700299 help
300 Normally, IDE controllers built into the motherboard (on-board
301 controllers) are assigned to ide0 and ide1 while those on add-in PCI
302 cards (off-board controllers) are relegated to ide2 and ide3.
303 Answering Y here will allow you to reverse the situation, with
304 off-board controllers on ide0/1 and on-board controllers on ide2/3.
305 This can improve the usability of some boot managers such as lilo
306 when booting from a drive on an off-board controller.
307
Linus Torvalds1da177e2005-04-16 15:20:36 -0700308 Note that, if you do this, the order of the hd* devices will be
309 rearranged which may require modification of fstab and other files.
310
Bartlomiej Zolnierkiewicz46255d42007-12-12 23:31:57 +0100311 Please also note that this method of assuring stable naming of
312 IDE devices is unreliable and use other means for achieving it
313 (i.e. udev).
314
Linus Torvalds1da177e2005-04-16 15:20:36 -0700315 If in doubt, say N.
316
317config BLK_DEV_GENERIC
318 tristate "Generic PCI IDE Chipset Support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200319 select BLK_DEV_IDEPCI
John Daikeredd023d2007-02-17 19:52:10 +0100320 help
321 This option provides generic support for various PCI IDE Chipsets
322 which otherwise might not be supported.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700323
324config BLK_DEV_OPTI621
Kees Cook762150e2012-10-02 11:17:10 -0700325 tristate "OPTi 82C621 chipset enhanced support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200326 select BLK_DEV_IDEPCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700327 help
328 This is a driver for the OPTi 82C621 EIDE controller.
Johann Felix Soden40cba972011-10-10 23:48:53 +0200329 Please read the comments at the top of <file:drivers/ide/opti621.c>.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700330
331config BLK_DEV_RZ1000
332 tristate "RZ1000 chipset bugfix/support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200333 depends on X86
334 select BLK_DEV_IDEPCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700335 help
336 The PC-Technologies RZ1000 IDE chip is used on many common 486 and
337 Pentium motherboards, usually along with the "Neptune" chipset.
338 Unfortunately, it has a rather nasty design flaw that can cause
339 severe data corruption under many conditions. Say Y here to include
340 code which automatically detects and corrects the problem under
341 Linux. This may slow disk throughput by a few percent, but at least
342 things will operate 100% reliably.
343
Linus Torvalds1da177e2005-04-16 15:20:36 -0700344config BLK_DEV_IDEDMA_PCI
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200345 bool
346 select BLK_DEV_IDEPCI
Sergei Shtylyov8e882ba2008-02-11 00:32:14 +0100347 select BLK_DEV_IDEDMA_SFF
Linus Torvalds1da177e2005-04-16 15:20:36 -0700348
Linus Torvalds1da177e2005-04-16 15:20:36 -0700349config BLK_DEV_AEC62XX
350 tristate "AEC62XX chipset support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200351 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700352 help
353 This driver adds explicit support for Acard AEC62xx (Artop ATP8xx)
354 IDE controllers. This allows the kernel to change PIO, DMA and UDMA
355 speeds and to configure the chip to optimum performance.
356
357config BLK_DEV_ALI15X3
358 tristate "ALI M15x3 chipset support"
Bartlomiej Zolnierkiewicz288911a2008-07-16 20:33:37 +0200359 select IDE_TIMINGS
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200360 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700361 help
362 This driver ensures (U)DMA support for ALI 1533, 1543 and 1543C
363 onboard chipsets. It also tests for Simplex mode and enables
364 normal dual channel support.
365
Bartlomiej Zolnierkiewicz64afc312008-05-14 23:06:16 +0200366 Please read the comments at the top of
Johann Felix Soden40cba972011-10-10 23:48:53 +0200367 <file:drivers/ide/alim15x3.c>.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700368
369 If unsure, say N.
370
Linus Torvalds1da177e2005-04-16 15:20:36 -0700371config BLK_DEV_AMD74XX
372 tristate "AMD and nVidia IDE support"
Andrew Morton91302012007-11-27 21:35:56 +0100373 depends on !ARM
Bartlomiej Zolnierkiewiczf06ab342008-07-16 20:33:37 +0200374 select IDE_TIMINGS
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200375 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700376 help
377 This driver adds explicit support for AMD-7xx and AMD-8111 chips
378 and also for the nVidia nForce chip. This allows the kernel to
379 change PIO, DMA and UDMA speeds and to configure the chip to
380 optimum performance.
381
382config BLK_DEV_ATIIXP
383 tristate "ATI IXP chipset IDE support"
384 depends on X86
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200385 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700386 help
387 This driver adds explicit support for ATI IXP chipset.
388 This allows the kernel to change PIO, DMA and UDMA speeds
389 and to configure the chip to optimum performance.
390
391 Say Y here if you have an ATI IXP chipset IDE controller.
392
393config BLK_DEV_CMD64X
394 tristate "CMD64{3|6|8|9} chipset support"
Bartlomiej Zolnierkiewicz86a0e122008-07-16 20:33:38 +0200395 select IDE_TIMINGS
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200396 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700397 help
398 Say Y here if you have an IDE controller which uses any of these
399 chipsets: CMD643, CMD646, or CMD648.
400
401config BLK_DEV_TRIFLEX
402 tristate "Compaq Triflex IDE support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200403 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700404 help
405 Say Y here if you have a Compaq Triflex IDE controller, such
406 as those commonly found on Compaq Pentium-Pro systems
407
408config BLK_DEV_CY82C693
409 tristate "CY82C693 chipset support"
Bartlomiej Zolnierkiewiczcbf3d262008-07-23 19:55:54 +0200410 depends on ALPHA
Bartlomiej Zolnierkiewicz713a5902008-07-16 20:33:38 +0200411 select IDE_TIMINGS
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200412 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700413 help
414 This driver adds detection and support for the CY82C693 chipset
415 used on Digital's PC-Alpha 164SX boards.
416
Linus Torvalds1da177e2005-04-16 15:20:36 -0700417config BLK_DEV_CS5520
418 tristate "Cyrix CS5510/20 MediaGX chipset support (VERY EXPERIMENTAL)"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200419 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700420 help
Andreas Mohr3b6ce242006-02-03 03:04:54 -0800421 Include support for PIO tuning and virtual DMA on the Cyrix MediaGX
Linus Torvalds1da177e2005-04-16 15:20:36 -0700422 5510/5520 chipset. This will automatically be detected and
423 configured if found.
424
425 It is safe to say Y to this question.
426
427config BLK_DEV_CS5530
428 tristate "Cyrix/National Semiconductor CS5530 MediaGX chipset support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200429 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700430 help
431 Include support for UDMA on the Cyrix MediaGX 5530 chipset. This
432 will automatically be detected and configured if found.
433
434 It is safe to say Y to this question.
435
Jaya Kumarf5b2d8b2005-11-09 23:58:16 +0100436config BLK_DEV_CS5535
437 tristate "AMD CS5535 chipset support"
438 depends on X86 && !X86_64
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200439 select BLK_DEV_IDEDMA_PCI
Jaya Kumarf5b2d8b2005-11-09 23:58:16 +0100440 help
441 Include support for UDMA on the NSC/AMD CS5535 companion chipset.
442 This will automatically be detected and configured if found.
443
444 It is safe to say Y to this question.
445
Bartlomiej Zolnierkiewicza77dcc42009-02-02 20:12:23 +0100446config BLK_DEV_CS5536
447 tristate "CS5536 chipset support"
448 depends on X86_32
449 select BLK_DEV_IDEDMA_PCI
450 help
451 This option enables support for the AMD CS5536
452 companion chip used with the Geode LX processor family.
453
454 If unsure, say N.
455
Linus Torvalds1da177e2005-04-16 15:20:36 -0700456config BLK_DEV_HPT366
457 tristate "HPT36X/37X chipset support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200458 select BLK_DEV_IDEDMA_PCI
459 help
Linus Torvalds1da177e2005-04-16 15:20:36 -0700460 HPT366 is an Ultra DMA chipset for ATA-66.
461 HPT368 is an Ultra DMA chipset for ATA-66 RAID Based.
462 HPT370 is an Ultra DMA chipset for ATA-100.
463 HPT372 is an Ultra DMA chipset for ATA-100.
464 HPT374 is an Ultra DMA chipset for ATA-100.
465
466 This driver adds up to 4 more EIDE devices sharing a single
467 interrupt.
468
469 The HPT366 chipset in its current form is bootable. One solution
470 for this problem are special LILO commands for redirecting the
471 reference to device 0x80. The other solution is to say Y to "Boot
472 off-board chipsets first support" (CONFIG_BLK_DEV_OFFBOARD) unless
473 your mother board has the chipset natively mounted. Regardless one
Greg Kroah-Hartmana594eeb2008-04-18 00:46:20 +0200474 should use the fore mentioned option and call at LILO.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700475
476 This driver requires dynamic tuning of the chipset during the
477 ide-probe at boot. It is reported to support DVD II drives, by the
478 manufacturer.
479
Alan Coxbbb3bbd2006-10-03 01:14:12 -0700480config BLK_DEV_JMICRON
481 tristate "JMicron JMB36x support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200482 select BLK_DEV_IDEDMA_PCI
Alan Coxbbb3bbd2006-10-03 01:14:12 -0700483 help
484 Basic support for the JMicron ATA controllers. For full support
485 use the libata drivers.
486
Linus Torvalds1da177e2005-04-16 15:20:36 -0700487config BLK_DEV_SC1200
488 tristate "National SCx200 chipset support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200489 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700490 help
Frans Pope665d502008-02-01 23:09:16 +0100491 This driver adds support for the on-board IDE controller on the
492 National SCx200 series of embedded x86 "Geode" systems.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700493
494config BLK_DEV_PIIX
Bartlomiej Zolnierkiewicz64afc312008-05-14 23:06:16 +0200495 tristate "Intel PIIX/ICH chipsets support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200496 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700497 help
Bartlomiej Zolnierkiewicz64afc312008-05-14 23:06:16 +0200498 This driver adds explicit support for Intel PIIX and ICH chips.
499 This allows the kernel to change PIO, DMA and UDMA speeds and to
500 configure the chip to optimum performance.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700501
Shane McDonald391ad192009-01-06 17:21:01 +0100502config BLK_DEV_IT8172
503 tristate "IT8172 IDE support"
504 select BLK_DEV_IDEDMA_PCI
505 help
506 This driver adds support for the IDE controller on the
507 IT8172 System Controller.
508
Jack Lee9c6712c2007-02-07 18:19:09 +0100509config BLK_DEV_IT8213
510 tristate "IT8213 IDE support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200511 select BLK_DEV_IDEDMA_PCI
Jack Lee9c6712c2007-02-07 18:19:09 +0100512 help
513 This driver adds support for the ITE 8213 IDE controller.
514
Alan Coxda9091e2005-06-27 15:24:30 -0700515config BLK_DEV_IT821X
516 tristate "IT821X IDE support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200517 select BLK_DEV_IDEDMA_PCI
Alan Coxda9091e2005-06-27 15:24:30 -0700518 help
519 This driver adds support for the ITE 8211 IDE controller and the
520 IT 8212 IDE RAID controller in both RAID and pass-through mode.
521
Linus Torvalds1da177e2005-04-16 15:20:36 -0700522config BLK_DEV_NS87415
523 tristate "NS87415 chipset support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200524 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700525 help
526 This driver adds detection and support for the NS87415 chip
Matthew Wilcox41df8942005-11-18 16:18:40 -0500527 (used mainly on SPARC64 and PA-RISC machines).
Linus Torvalds1da177e2005-04-16 15:20:36 -0700528
Johann Felix Soden40cba972011-10-10 23:48:53 +0200529 Please read the comments at the top of <file:drivers/ide/ns87415.c>.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700530
531config BLK_DEV_PDC202XX_OLD
532 tristate "PROMISE PDC202{46|62|65|67} support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200533 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700534 help
535 Promise Ultra33 or PDC20246
536 Promise Ultra66 or PDC20262
537 Promise Ultra100 or PDC20265/PDC20267/PDC20268
538
539 This driver adds up to 4 more EIDE devices sharing a single
540 interrupt. This add-on card is a bootable PCI UDMA controller. Since
541 multiple cards can be installed and there are BIOS ROM problems that
542 happen if the BIOS revisions of all installed cards (three-max) do
543 not match, the driver attempts to do dynamic tuning of the chipset
544 at boot-time for max-speed. Ultra33 BIOS 1.25 or newer is required
Bartlomiej Zolnierkiewicz64afc312008-05-14 23:06:16 +0200545 for more than one card.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700546
547 Please read the comments at the top of
Johann Felix Soden40cba972011-10-10 23:48:53 +0200548 <file:drivers/ide/pdc202xx_old.c>.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700549
550 If unsure, say N.
551
Linus Torvalds1da177e2005-04-16 15:20:36 -0700552config BLK_DEV_PDC202XX_NEW
553 tristate "PROMISE PDC202{68|69|70|71|75|76|77} support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200554 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700555
Linus Torvalds1da177e2005-04-16 15:20:36 -0700556config BLK_DEV_SVWKS
557 tristate "ServerWorks OSB4/CSB5/CSB6 chipsets support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200558 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700559 help
560 This driver adds PIO/(U)DMA support for the ServerWorks OSB4/CSB5
561 chipsets.
562
563config BLK_DEV_SGIIOC4
Brent Casavante5d310b2005-06-21 17:16:01 -0700564 tristate "Silicon Graphics IOC4 chipset ATA/ATAPI support"
565 depends on (IA64_SGI_SN2 || IA64_GENERIC) && SGI_IOC4
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200566 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700567 help
568 This driver adds PIO & MultiMode DMA-2 support for the SGI IOC4
569 chipset, which has one channel and can support two devices.
570 Please say Y here if you have an Altix System from SGI.
571
572config BLK_DEV_SIIMAGE
573 tristate "Silicon Image chipset support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200574 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700575 help
576 This driver adds PIO/(U)DMA support for the SI CMD680 and SII
577 3112 (Serial ATA) chips.
578
579config BLK_DEV_SIS5513
580 tristate "SiS5513 chipset support"
581 depends on X86
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200582 select BLK_DEV_IDEDMA_PCI
583 help
Linus Torvalds1da177e2005-04-16 15:20:36 -0700584 This driver ensures (U)DMA support for SIS5513 chipset family based
585 mainboards.
586
587 The following chipsets are supported:
588 ATA16: SiS5511, SiS5513
589 ATA33: SiS5591, SiS5597, SiS5598, SiS5600
590 ATA66: SiS530, SiS540, SiS620, SiS630, SiS640
591 ATA100: SiS635, SiS645, SiS650, SiS730, SiS735, SiS740,
592 SiS745, SiS750
593
Johann Felix Soden40cba972011-10-10 23:48:53 +0200594 Please read the comments at the top of <file:drivers/ide/sis5513.c>.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700595
Olaf Hering9468f682006-12-06 20:39:55 -0800596config BLK_DEV_SL82C105
597 tristate "Winbond SL82c105 support"
598 depends on (PPC || ARM)
Bartlomiej Zolnierkiewicz3f847572008-07-16 20:33:38 +0200599 select IDE_TIMINGS
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200600 select BLK_DEV_IDEDMA_PCI
Olaf Hering9468f682006-12-06 20:39:55 -0800601 help
602 If you have a Winbond SL82c105 IDE controller, say Y here to enable
603 special configuration for this chip. This is common on various CHRP
604 motherboards, but could be used elsewhere. If in doubt, say Y.
605
Linus Torvalds1da177e2005-04-16 15:20:36 -0700606config BLK_DEV_SLC90E66
607 tristate "SLC90E66 chipset support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200608 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700609 help
Andreas Mohr3b6ce242006-02-03 03:04:54 -0800610 This driver ensures (U)DMA support for Victory66 SouthBridges for
Linus Torvalds1da177e2005-04-16 15:20:36 -0700611 SMsC with Intel NorthBridges. This is an Ultra66 based chipset.
612 The nice thing about it is that you can mix Ultra/DMA/PIO devices
613 and it will handle timing cycles. Since this is an improved
614 look-a-like to the PIIX4 it should be a nice addition.
615
Linus Torvalds1da177e2005-04-16 15:20:36 -0700616 Please read the comments at the top of
Johann Felix Soden40cba972011-10-10 23:48:53 +0200617 <file:drivers/ide/slc90e66.c>.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700618
619config BLK_DEV_TRM290
620 tristate "Tekram TRM290 chipset support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200621 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700622 help
623 This driver adds support for bus master DMA transfers
624 using the Tekram TRM290 PCI IDE chip. Volunteers are
625 needed for further tweaking and development.
Johann Felix Soden40cba972011-10-10 23:48:53 +0200626 Please read the comments at the top of <file:drivers/ide/trm290.c>.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700627
628config BLK_DEV_VIA82CXXX
629 tristate "VIA82CXXX chipset support"
Bartlomiej Zolnierkiewiczf06ab342008-07-16 20:33:37 +0200630 select IDE_TIMINGS
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200631 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700632 help
633 This driver adds explicit support for VIA BusMastering IDE chips.
634 This allows the kernel to change PIO, DMA and UDMA speeds and to
635 configure the chip to optimum performance.
636
Sergei Shtylyov33dced22007-02-07 18:18:45 +0100637config BLK_DEV_TC86C001
638 tristate "Toshiba TC86C001 support"
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200639 select BLK_DEV_IDEDMA_PCI
Sergei Shtylyov33dced22007-02-07 18:18:45 +0100640 help
641 This driver adds support for Toshiba TC86C001 GOKU-S chip.
642
Kou Ishizakia1067db2007-03-17 21:57:25 +0100643config BLK_DEV_CELLEB
644 tristate "Toshiba's Cell Reference Set IDE support"
645 depends on PPC_CELLEB
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200646 select BLK_DEV_IDEDMA_PCI
Kou Ishizakia1067db2007-03-17 21:57:25 +0100647 help
Frans Pope665d502008-02-01 23:09:16 +0100648 This driver provides support for the on-board IDE controller on
Kou Ishizakia1067db2007-03-17 21:57:25 +0100649 Toshiba Cell Reference Board.
650 If unsure, say Y.
651
Linus Torvalds1da177e2005-04-16 15:20:36 -0700652endif
653
Bartlomiej Zolnierkiewicz53846572008-12-08 17:52:05 +0100654# TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF
Linus Torvalds1da177e2005-04-16 15:20:36 -0700655config BLK_DEV_IDE_PMAC
Frans Pope665d502008-02-01 23:09:16 +0100656 tristate "PowerMac on-board IDE support"
Gilles Espinassed80c5922009-03-31 20:15:34 +0200657 depends on PPC_PMAC
Bartlomiej Zolnierkiewiczf06ab342008-07-16 20:33:37 +0200658 select IDE_TIMINGS
Bartlomiej Zolnierkiewicz53846572008-12-08 17:52:05 +0100659 select BLK_DEV_IDEDMA_PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700660 help
Frans Pope665d502008-02-01 23:09:16 +0100661 This driver provides support for the on-board IDE controller on
Linus Torvalds1da177e2005-04-16 15:20:36 -0700662 most of the recent Apple Power Macintoshes and PowerBooks.
663 If unsure, say Y.
664
665config BLK_DEV_IDE_PMAC_ATA100FIRST
Frans Pope665d502008-02-01 23:09:16 +0100666 bool "Probe on-board ATA/100 (Kauai) first"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700667 depends on BLK_DEV_IDE_PMAC
668 help
669 This option will cause the ATA/100 controller found in UniNorth2
670 based machines (Windtunnel PowerMac, Aluminium PowerBooks, ...)
671 to be probed before the ATA/66 and ATA/33 controllers. Without
672 these, those machine used to have the hard disk on hdc and the
673 CD-ROM on hda. This option changes this to more natural hda for
674 hard disk and hdc for CD-ROM.
675
Pete Popov26a940e2005-09-15 08:03:12 +0000676config BLK_DEV_IDE_AU1XXX
677 bool "IDE for AMD Alchemy Au1200"
Manuel Lauss3766386032011-08-12 11:39:45 +0200678 depends on MIPS_ALCHEMY
Bartlomiej Zolnierkiewicz7eeaaaa2009-03-24 23:22:46 +0100679 select IDE_XFER_MODE
Pete Popov26a940e2005-09-15 08:03:12 +0000680choice
681 prompt "IDE Mode for AMD Alchemy Au1200"
Paul Bolle6af677e2011-10-10 11:44:51 +0200682 default BLK_DEV_IDE_AU1XXX_PIO_DBDMA
Manuel Lauss3766386032011-08-12 11:39:45 +0200683 depends on BLK_DEV_IDE_AU1XXX
Pete Popov26a940e2005-09-15 08:03:12 +0000684
685config BLK_DEV_IDE_AU1XXX_PIO_DBDMA
686 bool "PIO+DbDMA IDE for AMD Alchemy Au1200"
687
688config BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
689 bool "MDMA2+DbDMA IDE for AMD Alchemy Au1200"
Manuel Lauss3766386032011-08-12 11:39:45 +0200690 depends on BLK_DEV_IDE_AU1XXX
Pete Popov26a940e2005-09-15 08:03:12 +0000691endchoice
692
Atsushi Nemoto28502842008-10-23 23:22:08 +0200693config BLK_DEV_IDE_TX4938
694 tristate "TX4938 internal IDE support"
695 depends on SOC_TX4938
696 select IDE_TIMINGS
697
Atsushi Nemoto37897982008-10-23 23:22:07 +0200698config BLK_DEV_IDE_TX4939
699 tristate "TX4939 internal IDE support"
700 depends on SOC_TX4939
701 select BLK_DEV_IDEDMA_SFF
702
Linus Torvalds1da177e2005-04-16 15:20:36 -0700703config BLK_DEV_IDE_ICSIDE
704 tristate "ICS IDE interface support"
705 depends on ARM && ARCH_ACORN
706 help
707 On Acorn systems, say Y here if you wish to use the ICS IDE
708 interface card. This is not required for ICS partition support.
709 If you are unsure, say N to this.
710
711config BLK_DEV_IDEDMA_ICS
712 bool "ICS DMA support"
713 depends on BLK_DEV_IDE_ICSIDE
714 help
715 Say Y here if you want to add DMA (Direct Memory Access) support to
716 the ICS IDE driver.
717
Linus Torvalds1da177e2005-04-16 15:20:36 -0700718config BLK_DEV_IDE_RAPIDE
719 tristate "RapIDE interface support"
720 depends on ARM && ARCH_ACORN
721 help
722 Say Y here if you want to support the Yellowstone RapIDE controller
723 manufactured for use with Acorn computers.
724
Linus Torvalds1da177e2005-04-16 15:20:36 -0700725config BLK_DEV_GAYLE
Bartlomiej Zolnierkiewiczade2daf2008-01-26 20:13:07 +0100726 tristate "Amiga Gayle IDE interface support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700727 depends on AMIGA
728 help
729 This is the IDE driver for the Amiga Gayle IDE interface. It supports
730 both the `A1200 style' and `A4000 style' of the Gayle IDE interface,
Frans Pope665d502008-02-01 23:09:16 +0100731 This includes on-board IDE interfaces on some Amiga models (A600,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700732 A1200, A4000, and A4000T), and IDE interfaces on the Zorro expansion
733 bus (M-Tech E-Matrix 530 expansion card).
Linus Torvalds1da177e2005-04-16 15:20:36 -0700734
Bartlomiej Zolnierkiewicz9f5af4d2009-03-31 20:15:26 +0200735 It also provides support for the so-called `IDE doublers' (made
Frans Pope665d502008-02-01 23:09:16 +0100736 by various manufacturers, e.g. Eyetech) that can be connected to
737 the on-board IDE interface of some Amiga models. Using such an IDE
738 doubler, you can connect up to four instead of two IDE devices to
Bartlomiej Zolnierkiewicz9f5af4d2009-03-31 20:15:26 +0200739 the Amiga's on-board IDE interface. The feature is enabled at kernel
Bartlomiej Zolnierkiewicz64afc312008-05-14 23:06:16 +0200740 runtime using the "gayle.doubler" kernel boot parameter.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700741
Bartlomiej Zolnierkiewicz9f5af4d2009-03-31 20:15:26 +0200742 Say Y if you have an Amiga with a Gayle IDE interface and want to use
743 IDE devices (hard disks, CD-ROM drives, etc.) that are connected to
744 it.
745
746 Note that you also have to enable Zorro bus support if you want to
747 use Gayle IDE interfaces on the Zorro expansion bus.
748
Linus Torvalds1da177e2005-04-16 15:20:36 -0700749config BLK_DEV_BUDDHA
Kees Cook762150e2012-10-02 11:17:10 -0700750 tristate "Buddha/Catweasel/X-Surf IDE interface support"
751 depends on ZORRO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700752 help
Frans Pope665d502008-02-01 23:09:16 +0100753 This is the IDE driver for the IDE interfaces on the Buddha, Catweasel
754 and X-Surf expansion boards. It supports up to two interfaces on the
755 Buddha, three on the Catweasel and two on the X-Surf.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700756
757 Say Y if you have a Buddha or Catweasel expansion board and want to
758 use IDE devices (hard disks, CD-ROM drives, etc.) that are connected
759 to one of its IDE interfaces.
760
761config BLK_DEV_FALCON_IDE
Bartlomiej Zolnierkiewiczade2daf2008-01-26 20:13:07 +0100762 tristate "Falcon IDE interface support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700763 depends on ATARI
764 help
Frans Pope665d502008-02-01 23:09:16 +0100765 This is the IDE driver for the on-board IDE interface on the Atari
Linus Torvalds1da177e2005-04-16 15:20:36 -0700766 Falcon. Say Y if you have a Falcon and want to use IDE devices (hard
Frans Pope665d502008-02-01 23:09:16 +0100767 disks, CD-ROM drives, etc.) that are connected to the on-board IDE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700768 interface.
769
770config BLK_DEV_MAC_IDE
Bartlomiej Zolnierkiewiczade2daf2008-01-26 20:13:07 +0100771 tristate "Macintosh Quadra/Powerbook IDE interface support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700772 depends on MAC
773 help
Frans Pope665d502008-02-01 23:09:16 +0100774 This is the IDE driver for the on-board IDE interface on some m68k
Linus Torvalds1da177e2005-04-16 15:20:36 -0700775 Macintosh models. It supports both the `Quadra style' (used in
776 Quadra/ Centris 630 and Performa 588 models) and `Powerbook style'
777 (used in the Powerbook 150 and 190 models) IDE interface.
778
779 Say Y if you have such an Macintosh model and want to use IDE
780 devices (hard disks, CD-ROM drives, etc.) that are connected to the
Frans Pope665d502008-02-01 23:09:16 +0100781 on-board IDE interface.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700782
783config BLK_DEV_Q40IDE
Bartlomiej Zolnierkiewiczade2daf2008-01-26 20:13:07 +0100784 tristate "Q40/Q60 IDE interface support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700785 depends on Q40
786 help
787 Enable the on-board IDE controller in the Q40/Q60. This should
788 normally be on; disable it only if you are running a custom hard
789 drive subsystem through an expansion card.
790
Anton Salnikov7c7e92a2008-02-06 02:57:48 +0100791config BLK_DEV_PALMCHIP_BK3710
792 tristate "Palmchip bk3710 IDE controller support"
793 depends on ARCH_DAVINCI
Bartlomiej Zolnierkiewiczf06ab342008-07-16 20:33:37 +0200794 select IDE_TIMINGS
Sergei Shtylyov8e882ba2008-02-11 00:32:14 +0100795 select BLK_DEV_IDEDMA_SFF
Anton Salnikov7c7e92a2008-02-06 02:57:48 +0100796 help
797 Say Y here if you want to support the onchip IDE controller on the
798 TI DaVinci SoC
799
Linus Torvalds1da177e2005-04-16 15:20:36 -0700800# no isa -> no vlb
Bartlomiej Zolnierkiewicze4079df02008-04-18 00:46:35 +0200801if ISA && (ALPHA || X86 || MIPS)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700802
Bartlomiej Zolnierkiewicz842c19a2007-10-11 23:54:00 +0200803comment "Other IDE chipsets support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700804comment "Note: most of these also require special kernel boot parameters"
805
806config BLK_DEV_4DRIVES
Frederik Deweerdt938da772008-04-26 17:36:31 +0200807 tristate "Generic 4 drives/port support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700808 help
809 Certain older chipsets, including the Tekram 690CD, use a single set
810 of I/O ports at 0x1f0 to control up to four drives, instead of the
811 customary two drives per port. Support for this can be enabled at
Bartlomiej Zolnierkiewiczffd4f6f2008-04-18 00:46:34 +0200812 runtime using the "ide-4drives.probe" kernel boot parameter if you
813 say Y here.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700814
815config BLK_DEV_ALI14XX
816 tristate "ALI M14xx support"
Bartlomiej Zolnierkiewiczcc57ccc2008-07-16 20:33:37 +0200817 select IDE_TIMINGS
Bartlomiej Zolnierkiewicz7f92b112008-12-29 20:27:37 +0100818 select IDE_LEGACY
Linus Torvalds1da177e2005-04-16 15:20:36 -0700819 help
Bartlomiej Zolnierkiewicz84913882007-03-03 17:48:55 +0100820 This driver is enabled at runtime using the "ali14xx.probe" kernel
Linus Torvalds1da177e2005-04-16 15:20:36 -0700821 boot parameter. It enables support for the secondary IDE interface
822 of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
Randy Dunlap1c10e932008-03-07 21:53:50 +0100823 I/O speeds to be set as well.
824 See the files <file:Documentation/ide/ide.txt> and
Johann Felix Soden40cba972011-10-10 23:48:53 +0200825 <file:drivers/ide/ali14xx.c> for more info.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700826
827config BLK_DEV_DTC2278
828 tristate "DTC-2278 support"
Bartlomiej Zolnierkiewicz7eeaaaa2009-03-24 23:22:46 +0100829 select IDE_XFER_MODE
Bartlomiej Zolnierkiewicz7f92b112008-12-29 20:27:37 +0100830 select IDE_LEGACY
Linus Torvalds1da177e2005-04-16 15:20:36 -0700831 help
Bartlomiej Zolnierkiewicz84913882007-03-03 17:48:55 +0100832 This driver is enabled at runtime using the "dtc2278.probe" kernel
Linus Torvalds1da177e2005-04-16 15:20:36 -0700833 boot parameter. It enables support for the secondary IDE interface
834 of the DTC-2278 card, and permits faster I/O speeds to be set as
Randy Dunlap1c10e932008-03-07 21:53:50 +0100835 well. See the <file:Documentation/ide/ide.txt> and
Johann Felix Soden40cba972011-10-10 23:48:53 +0200836 <file:drivers/ide/dtc2278.c> files for more info.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700837
838config BLK_DEV_HT6560B
839 tristate "Holtek HT6560B support"
Bartlomiej Zolnierkiewiczb32b76f2008-07-16 20:33:37 +0200840 select IDE_TIMINGS
Bartlomiej Zolnierkiewicz7f92b112008-12-29 20:27:37 +0100841 select IDE_LEGACY
Linus Torvalds1da177e2005-04-16 15:20:36 -0700842 help
Bartlomiej Zolnierkiewicz84913882007-03-03 17:48:55 +0100843 This driver is enabled at runtime using the "ht6560b.probe" kernel
Linus Torvalds1da177e2005-04-16 15:20:36 -0700844 boot parameter. It enables support for the secondary IDE interface
845 of the Holtek card, and permits faster I/O speeds to be set as well.
Randy Dunlap1c10e932008-03-07 21:53:50 +0100846 See the <file:Documentation/ide/ide.txt> and
Johann Felix Soden40cba972011-10-10 23:48:53 +0200847 <file:drivers/ide/ht6560b.c> files for more info.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700848
849config BLK_DEV_QD65XX
850 tristate "QDI QD65xx support"
Bartlomiej Zolnierkiewicz2feecfa2008-07-16 20:33:37 +0200851 select IDE_TIMINGS
Bartlomiej Zolnierkiewicz7f92b112008-12-29 20:27:37 +0100852 select IDE_LEGACY
Linus Torvalds1da177e2005-04-16 15:20:36 -0700853 help
Bartlomiej Zolnierkiewicz84913882007-03-03 17:48:55 +0100854 This driver is enabled at runtime using the "qd65xx.probe" kernel
Linus Torvalds1da177e2005-04-16 15:20:36 -0700855 boot parameter. It permits faster I/O speeds to be set. See the
Johann Felix Soden40cba972011-10-10 23:48:53 +0200856 <file:Documentation/ide/ide.txt> and <file:drivers/ide/qd65xx.c>
Frans Pope665d502008-02-01 23:09:16 +0100857 for more info.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700858
859config BLK_DEV_UMC8672
860 tristate "UMC-8672 support"
Bartlomiej Zolnierkiewicz7eeaaaa2009-03-24 23:22:46 +0100861 select IDE_XFER_MODE
Bartlomiej Zolnierkiewicz7f92b112008-12-29 20:27:37 +0100862 select IDE_LEGACY
Linus Torvalds1da177e2005-04-16 15:20:36 -0700863 help
Bartlomiej Zolnierkiewicz84913882007-03-03 17:48:55 +0100864 This driver is enabled at runtime using the "umc8672.probe" kernel
Linus Torvalds1da177e2005-04-16 15:20:36 -0700865 boot parameter. It enables support for the secondary IDE interface
866 of the UMC-8672, and permits faster I/O speeds to be set as well.
Randy Dunlap1c10e932008-03-07 21:53:50 +0100867 See the files <file:Documentation/ide/ide.txt> and
Johann Felix Soden40cba972011-10-10 23:48:53 +0200868 <file:drivers/ide/umc8672.c> for more info.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700869
870endif
871
872config BLK_DEV_IDEDMA
Bartlomiej Zolnierkiewicz53846572008-12-08 17:52:05 +0100873 def_bool BLK_DEV_IDEDMA_SFF || \
Sergei Shtylyov8e882ba2008-02-11 00:32:14 +0100874 BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
Bartlomiej Zolnierkiewicz7eeaaaa2009-03-24 23:22:46 +0100875 select IDE_XFER_MODE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700876
Jan Engelhardte0ff9cd2007-05-16 00:51:46 +0200877endif # IDE