arch/x86_64/mm/srat.c

/*
 * ACPI 3.0 based NUMA setup
 * Copyright 2004 Andi Kleen, SuSE Labs.
 *
 * Reads the ACPI SRAT table to figure out what memory belongs to which CPUs.
 *
 * Called from acpi_numa_init while reading the SRAT and SLIT tables.
 * Assumes all memory regions belonging to a single proximity domain
 * are in one chunk. Holes between them will be included in the node.
 */

#include <linux/kernel.h>
#include <linux/acpi.h>
#include <linux/mmzone.h>
#include <linux/bitmap.h>
#include <linux/module.h>
#include <linux/topology.h>
#include <asm/proto.h>
#include <asm/numa.h>

static struct acpi_table_slit *acpi_slit;

static nodemask_t nodes_parsed __initdata;
static nodemask_t nodes_found __initdata;
static struct node nodes[MAX_NUMNODES] __initdata;
static u8 pxm2node[256] = { [0 ... 255] = 0xff };

static int node_to_pxm(int n);

int pxm_to_node(int pxm)
{
	if ((unsigned)pxm >= 256)
		return -1;
	/* Extend 0xff to (int)-1 */
	return (signed char)pxm2node[pxm];
}

static __init int setup_node(int pxm)
{
	unsigned node = pxm2node[pxm];
	if (node == 0xff) {
		if (nodes_weight(nodes_found) >= MAX_NUMNODES)
			return -1;
		node = first_unset_node(nodes_found); 
		node_set(node, nodes_found);
		pxm2node[pxm] = node;
	}
	return pxm2node[pxm];
}

static __init int conflicting_nodes(unsigned long start, unsigned long end)
{
	int i;
	for_each_node_mask(i, nodes_parsed) {
		struct node *nd = &nodes[i];
		if (nd->start == nd->end)
			continue;
		if (nd->end > start && nd->start < end)
			return i;
		if (nd->end == end && nd->start == start)
			return i;
	}
	return -1;
}

static __init void cutoff_node(int i, unsigned long start, unsigned long end)
{
	struct node *nd = &nodes[i];
	if (nd->start < start) {
		nd->start = start;
		if (nd->end < nd->start)
			nd->start = nd->end;
	}
	if (nd->end > end) {
		nd->end = end;
		if (nd->start > nd->end)
			nd->start = nd->end;
	}
}

static __init void bad_srat(void)
{
	int i;
	printk(KERN_ERR "SRAT: SRAT not used.\n");
	acpi_numa = -1;
	for (i = 0; i < MAX_LOCAL_APIC; i++)
		apicid_to_node[i] = NUMA_NO_NODE;
}

static __init inline int srat_disabled(void)
{
	return numa_off || acpi_numa < 0;
}

/*
 * A lot of BIOS fill in 10 (= no distance) everywhere. This messes
 * up the NUMA heuristics which wants the local node to have a smaller
 * distance than the others.
 * Do some quick checks here and only use the SLIT if it passes.
 */
static __init int slit_valid(struct acpi_table_slit *slit)
{
	int i, j;
	int d = slit->localities;
	for (i = 0; i < d; i++) {
		for (j = 0; j < d; j++)  {
			u8 val = slit->entry[d*i + j];
			if (i == j) {
				if (val != 10)
					return 0;
			} else if (val <= 10)
				return 0;
		}
	}
	return 1;
}

/* Callback for SLIT parsing */
void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
{
	if (!slit_valid(slit)) {
		printk(KERN_INFO "ACPI: SLIT table looks invalid. Not used.\n");
		return;
	}
	acpi_slit = slit;
}

/* Callback for Proximity Domain -> LAPIC mapping */
void __init
acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa)
{
	int pxm, node;
	if (srat_disabled() || pa->flags.enabled == 0)
		return;
	pxm = pa->proximity_domain;
	node = setup_node(pxm);
	if (node < 0) {
		printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm);
		bad_srat();
		return;
	}
	apicid_to_node[pa->apic_id] = node;
	acpi_numa = 1;
	printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n",
	       pxm, pa->apic_id, node);
}

/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
void __init
acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma)
{
	struct node *nd;
	unsigned long start, end;
	int node, pxm;
	int i;

	if (srat_disabled() || ma->flags.enabled == 0)
		return;
	pxm = ma->proximity_domain;
	node = setup_node(pxm);
	if (node < 0) {
		printk(KERN_ERR "SRAT: Too many proximity domains.\n");
		bad_srat();
		return;
	}
	start = ma->base_addr_lo | ((u64)ma->base_addr_hi << 32);
	end = start + (ma->length_lo | ((u64)ma->length_hi << 32));
	/* It is fine to add this area to the nodes data it will be used later*/
	if (ma->flags.hot_pluggable == 1)
		printk(KERN_INFO "SRAT: hot plug zone found %lx - %lx \n",
				start, end);
	i = conflicting_nodes(start, end);
	if (i == node) {
		printk(KERN_WARNING
		"SRAT: Warning: PXM %d (%lx-%lx) overlaps with itself (%Lx-%Lx)\n",
			pxm, start, end, nodes[i].start, nodes[i].end);
	} else if (i >= 0) {
		printk(KERN_ERR
		       "SRAT: PXM %d (%lx-%lx) overlaps with PXM %d (%Lx-%Lx)\n",
		       pxm, start, end, node_to_pxm(i),
			nodes[i].start, nodes[i].end);
		bad_srat();
		return;
	}
	nd = &nodes[node];
	if (!node_test_and_set(node, nodes_parsed)) {
		nd->start = start;
		nd->end = end;
	} else {
		if (start < nd->start)
			nd->start = start;
		if (nd->end < end)
			nd->end = end;
	}
	printk(KERN_INFO "SRAT: Node %u PXM %u %Lx-%Lx\n", node, pxm,
	       nd->start, nd->end);
}

void __init acpi_numa_arch_fixup(void) {}

/* Use the information discovered above to actually set up the nodes. */
int __init acpi_scan_nodes(unsigned long start, unsigned long end)
{
	int i;
	if (acpi_numa <= 0)
		return -1;

	/* First clean up the node list */
	for_each_node_mask(i, nodes_parsed) {
		cutoff_node(i, start, end);
		if (nodes[i].start == nodes[i].end)
			node_clear(i, nodes_parsed);
	}

	memnode_shift = compute_hash_shift(nodes, nodes_weight(nodes_parsed));
	if (memnode_shift < 0) {
		printk(KERN_ERR
		     "SRAT: No NUMA node hash function found. Contact maintainer\n");
		bad_srat();
		return -1;
	}

	/* Finally register nodes */
	for_each_node_mask(i, nodes_parsed)
		setup_node_bootmem(i, nodes[i].start, nodes[i].end);
	for (i = 0; i < NR_CPUS; i++) { 
		if (cpu_to_node[i] == NUMA_NO_NODE)
			continue;
		if (!node_isset(cpu_to_node[i], nodes_parsed))
			numa_set_node(i, NUMA_NO_NODE);
	}
	numa_init_array();
	return 0;
}

static int node_to_pxm(int n)
{
       int i;
       if (pxm2node[n] == n)
               return n;
       for (i = 0; i < 256; i++)
               if (pxm2node[i] == n)
                       return i;
       return 0;
}

int __node_distance(int a, int b)
{
	int index;

	if (!acpi_slit)
		return a == b ? 10 : 20;
	index = acpi_slit->localities * node_to_pxm(a);
	return acpi_slit->entry[index + node_to_pxm(b)];
}

EXPORT_SYMBOL(__node_distance);