blob: ff92efd65a53221aeac32a1170f85960ea3715cc [file] [log] [blame]
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +01001/*
2 * Handles the Mitac Mio A701 Board
3 *
4 * Copyright (C) 2008 Robert Jarzmik
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 *
20 */
21
22#include <linux/kernel.h>
23#include <linux/init.h>
24#include <linux/platform_device.h>
Rafael J. Wysocki2eaa03b2011-04-22 22:03:11 +020025#include <linux/syscore_ops.h>
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +010026#include <linux/input.h>
27#include <linux/delay.h>
28#include <linux/gpio_keys.h>
29#include <linux/pwm_backlight.h>
30#include <linux/rtc.h>
31#include <linux/leds.h>
32#include <linux/gpio.h>
33#include <linux/interrupt.h>
34#include <linux/irq.h>
35#include <linux/pda_power.h>
36#include <linux/power_supply.h>
Marek Vasut241cf472010-06-04 03:07:33 +020037#include <linux/wm97xx.h>
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +010038#include <linux/mtd/physmap.h>
Robert Jarzmik689b4fe2009-01-30 20:48:24 +010039#include <linux/usb/gpio_vbus.h>
Robert Jarzmik9752e142009-04-30 11:53:30 +080040#include <linux/regulator/max1586.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090041#include <linux/slab.h>
Sebastian Andrzej Siewiorb4593962011-02-23 12:38:16 +010042#include <linux/i2c/pxa-i2c.h>
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +010043
44#include <asm/mach-types.h>
45#include <asm/mach/arch.h>
Eric Miao51c62982009-01-02 23:17:22 +080046
47#include <mach/pxa27x.h>
Eric Miao5bf3df32009-01-20 11:04:16 +080048#include <mach/regs-rtc.h>
Mark F. Brown4a2490e2010-09-03 18:28:06 -040049#include <plat/pxa27x_keypad.h>
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +010050#include <mach/pxafb.h>
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +010051#include <mach/mmc.h>
52#include <mach/udc.h>
53#include <mach/pxa27x-udc.h>
Robert Jarzmik8e7ccdd2008-11-15 16:09:54 +010054#include <mach/camera.h>
Mark Brown80748fb2009-04-03 12:45:49 +010055#include <mach/audio.h>
Robert Jarzmik8e7ccdd2008-11-15 16:09:54 +010056#include <media/soc_camera.h>
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +010057
58#include <mach/mioa701.h>
59
60#include "generic.h"
61#include "devices.h"
62
63static unsigned long mioa701_pin_config[] = {
64 /* Mio global */
Robert Jarzmikc96763d2008-11-18 20:23:32 +010065 MIO_CFG_OUT(GPIO9_CHARGE_EN, AF0, DRIVE_LOW),
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +010066 MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
67 MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
68 MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
Robert Jarzmikc96763d2008-11-18 20:23:32 +010069 MIO_CFG_IN(GPIO80_MAYBE_CHARGE_VDROP, AF0),
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +010070
71 /* Backlight PWM 0 */
72 GPIO16_PWM0_OUT,
73
74 /* MMC */
75 GPIO32_MMC_CLK,
76 GPIO92_MMC_DAT_0,
77 GPIO109_MMC_DAT_1,
78 GPIO110_MMC_DAT_2,
79 GPIO111_MMC_DAT_3,
80 GPIO112_MMC_CMD,
81 MIO_CFG_IN(GPIO78_SDIO_RO, AF0),
82 MIO_CFG_IN(GPIO15_SDIO_INSERT, AF0),
83 MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW),
84
85 /* USB */
Robert Jarzmikc96763d2008-11-18 20:23:32 +010086 MIO_CFG_IN(GPIO13_nUSB_DETECT, AF0),
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +010087 MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
88
89 /* LCD */
Eric Miaobedbda92010-01-04 11:37:14 +080090 GPIOxx_LCD_TFT_16BPP,
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +010091
Robert Jarzmik8e7ccdd2008-11-15 16:09:54 +010092 /* QCI */
93 GPIO12_CIF_DD_7,
94 GPIO17_CIF_DD_6,
95 GPIO50_CIF_DD_3,
96 GPIO51_CIF_DD_2,
97 GPIO52_CIF_DD_4,
98 GPIO53_CIF_MCLK,
99 GPIO54_CIF_PCLK,
100 GPIO55_CIF_DD_1,
101 GPIO81_CIF_DD_0,
102 GPIO82_CIF_DD_5,
103 GPIO84_CIF_FV,
104 GPIO85_CIF_LV,
105
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100106 /* Bluetooth */
Robert Jarzmikc96763d2008-11-18 20:23:32 +0100107 MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0),
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100108 GPIO44_BTUART_CTS,
109 GPIO42_BTUART_RXD,
110 GPIO45_BTUART_RTS,
111 GPIO43_BTUART_TXD,
112 MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW),
Robert Jarzmikc96763d2008-11-18 20:23:32 +0100113 MIO_CFG_OUT(GPIO77_BT_UNKNOWN1, AF0, DRIVE_HIGH),
114 MIO_CFG_OUT(GPIO86_BT_MAYBE_nRESET, AF0, DRIVE_HIGH),
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100115
116 /* GPS */
117 MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW),
118 MIO_CFG_OUT(GPIO26_GPS_ON, AF0, DRIVE_LOW),
119 MIO_CFG_OUT(GPIO27_GPS_RESET, AF0, DRIVE_LOW),
120 MIO_CFG_OUT(GPIO106_GPS_UNKNOWN2, AF0, DRIVE_LOW),
121 MIO_CFG_OUT(GPIO107_GPS_UNKNOWN3, AF0, DRIVE_LOW),
122 GPIO46_STUART_RXD,
123 GPIO47_STUART_TXD,
124
125 /* GSM */
126 MIO_CFG_OUT(GPIO24_GSM_MOD_RESET_CMD, AF0, DRIVE_LOW),
127 MIO_CFG_OUT(GPIO88_GSM_nMOD_ON_CMD, AF0, DRIVE_HIGH),
128 MIO_CFG_OUT(GPIO90_GSM_nMOD_OFF_CMD, AF0, DRIVE_HIGH),
129 MIO_CFG_OUT(GPIO114_GSM_nMOD_DTE_UART_STATE, AF0, DRIVE_HIGH),
130 MIO_CFG_IN(GPIO25_GSM_MOD_ON_STATE, AF0),
131 MIO_CFG_IN(GPIO113_GSM_EVENT, AF0) | WAKEUP_ON_EDGE_BOTH,
132 GPIO34_FFUART_RXD,
133 GPIO35_FFUART_CTS,
134 GPIO36_FFUART_DCD,
135 GPIO37_FFUART_DSR,
136 GPIO39_FFUART_TXD,
137 GPIO40_FFUART_DTR,
138 GPIO41_FFUART_RTS,
139
140 /* Sound */
Eric Miaoc11b6a42010-01-04 17:00:13 +0800141 GPIO28_AC97_BITCLK,
142 GPIO29_AC97_SDATA_IN_0,
143 GPIO30_AC97_SDATA_OUT,
144 GPIO31_AC97_SYNC,
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100145 GPIO89_AC97_SYSCLK,
146 MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0),
147
148 /* Leds */
149 MIO_CFG_OUT(GPIO10_LED_nCharging, AF0, DRIVE_HIGH),
150 MIO_CFG_OUT(GPIO97_LED_nBlue, AF0, DRIVE_HIGH),
151 MIO_CFG_OUT(GPIO98_LED_nOrange, AF0, DRIVE_HIGH),
152 MIO_CFG_OUT(GPIO82_LED_nVibra, AF0, DRIVE_HIGH),
153 MIO_CFG_OUT(GPIO115_LED_nKeyboard, AF0, DRIVE_HIGH),
154
155 /* Keyboard */
156 MIO_CFG_IN(GPIO0_KEY_POWER, AF0) | WAKEUP_ON_EDGE_BOTH,
157 MIO_CFG_IN(GPIO93_KEY_VOLUME_UP, AF0),
158 MIO_CFG_IN(GPIO94_KEY_VOLUME_DOWN, AF0),
159 GPIO100_KP_MKIN_0,
160 GPIO101_KP_MKIN_1,
161 GPIO102_KP_MKIN_2,
162 GPIO103_KP_MKOUT_0,
163 GPIO104_KP_MKOUT_1,
164 GPIO105_KP_MKOUT_2,
165
Robert Jarzmik8e7ccdd2008-11-15 16:09:54 +0100166 /* I2C */
167 GPIO117_I2C_SCL,
168 GPIO118_I2C_SDA,
169
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100170 /* Unknown */
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100171 MFP_CFG_IN(GPIO20, AF0),
172 MFP_CFG_IN(GPIO21, AF0),
173 MFP_CFG_IN(GPIO33, AF0),
174 MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH),
175 MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH),
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100176 MFP_CFG_IN(GPIO96, AF0),
177 MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
178};
179
180#define MIO_GPIO_IN(num, _desc) \
181 { .gpio = (num), .dir = 0, .desc = (_desc) }
182#define MIO_GPIO_OUT(num, _init, _desc) \
183 { .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) }
184struct gpio_ress {
185 unsigned gpio : 8;
186 unsigned dir : 1;
187 unsigned init : 1;
188 char *desc;
189};
190
191static int mio_gpio_request(struct gpio_ress *gpios, int size)
192{
193 int i, rc = 0;
194 int gpio;
195 int dir;
196
197 for (i = 0; (!rc) && (i < size); i++) {
198 gpio = gpios[i].gpio;
199 dir = gpios[i].dir;
200 rc = gpio_request(gpio, gpios[i].desc);
201 if (rc) {
202 printk(KERN_ERR "Error requesting GPIO %d(%s) : %d\n",
203 gpio, gpios[i].desc, rc);
204 continue;
205 }
206 if (dir)
207 gpio_direction_output(gpio, gpios[i].init);
208 else
209 gpio_direction_input(gpio);
210 }
211 while ((rc) && (--i >= 0))
212 gpio_free(gpios[i].gpio);
213 return rc;
214}
215
216static void mio_gpio_free(struct gpio_ress *gpios, int size)
217{
218 int i;
219
220 for (i = 0; i < size; i++)
221 gpio_free(gpios[i].gpio);
222}
223
224/* LCD Screen and Backlight */
225static struct platform_pwm_backlight_data mioa701_backlight_data = {
226 .pwm_id = 0,
227 .max_brightness = 100,
228 .dft_brightness = 50,
229 .pwm_period_ns = 4000 * 1024, /* Fl = 250kHz */
230};
231
232/*
233 * LTM0305A776C LCD panel timings
234 *
235 * see:
236 * - the LTM0305A776C datasheet,
237 * - and the PXA27x Programmers' manual
238 */
239static struct pxafb_mode_info mioa701_ltm0305a776c = {
240 .pixclock = 220000, /* CLK=4.545 MHz */
241 .xres = 240,
242 .yres = 320,
243 .bpp = 16,
244 .hsync_len = 4,
245 .vsync_len = 2,
246 .left_margin = 6,
247 .right_margin = 4,
248 .upper_margin = 5,
249 .lower_margin = 3,
250};
251
252static void mioa701_lcd_power(int on, struct fb_var_screeninfo *si)
253{
254 gpio_set_value(GPIO87_LCD_POWER, on);
255}
256
257static struct pxafb_mach_info mioa701_pxafb_info = {
258 .modes = &mioa701_ltm0305a776c,
259 .num_modes = 1,
260 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
261 .pxafb_lcd_power = mioa701_lcd_power,
262};
263
264/*
265 * Keyboard configuration
266 */
267static unsigned int mioa701_matrix_keys[] = {
268 KEY(0, 0, KEY_UP),
269 KEY(0, 1, KEY_RIGHT),
270 KEY(0, 2, KEY_MEDIA),
271 KEY(1, 0, KEY_DOWN),
272 KEY(1, 1, KEY_ENTER),
273 KEY(1, 2, KEY_CONNECT), /* GPS key */
274 KEY(2, 0, KEY_LEFT),
275 KEY(2, 1, KEY_PHONE), /* Phone Green key */
276 KEY(2, 2, KEY_CAMERA) /* Camera key */
277};
278static struct pxa27x_keypad_platform_data mioa701_keypad_info = {
279 .matrix_key_rows = 3,
280 .matrix_key_cols = 3,
281 .matrix_key_map = mioa701_matrix_keys,
282 .matrix_key_map_size = ARRAY_SIZE(mioa701_matrix_keys),
283};
284
285/*
286 * GPIO Key Configuration
287 */
288#define MIO_KEY(key, _gpio, _desc, _wakeup) \
289 { .code = (key), .gpio = (_gpio), .active_low = 0, \
290 .desc = (_desc), .type = EV_KEY, .wakeup = (_wakeup) }
291static struct gpio_keys_button mioa701_button_table[] = {
292 MIO_KEY(KEY_EXIT, GPIO0_KEY_POWER, "Power button", 1),
293 MIO_KEY(KEY_VOLUMEUP, GPIO93_KEY_VOLUME_UP, "Volume up", 0),
294 MIO_KEY(KEY_VOLUMEDOWN, GPIO94_KEY_VOLUME_DOWN, "Volume down", 0),
295 MIO_KEY(KEY_HP, GPIO12_HPJACK_INSERT, "HP jack detect", 0)
296};
297
298static struct gpio_keys_platform_data mioa701_gpio_keys_data = {
299 .buttons = mioa701_button_table,
300 .nbuttons = ARRAY_SIZE(mioa701_button_table),
301};
302
303/*
304 * Leds and vibrator
305 */
306#define ONE_LED(_gpio, _name) \
307{ .gpio = (_gpio), .name = (_name), .active_low = true }
308static struct gpio_led gpio_leds[] = {
309 ONE_LED(GPIO10_LED_nCharging, "mioa701:charging"),
310 ONE_LED(GPIO97_LED_nBlue, "mioa701:blue"),
311 ONE_LED(GPIO98_LED_nOrange, "mioa701:orange"),
312 ONE_LED(GPIO82_LED_nVibra, "mioa701:vibra"),
313 ONE_LED(GPIO115_LED_nKeyboard, "mioa701:keyboard")
314};
315
316static struct gpio_led_platform_data gpio_led_info = {
317 .leds = gpio_leds,
318 .num_leds = ARRAY_SIZE(gpio_leds),
319};
320
321/*
322 * GSM Sagem XS200 chip
323 *
324 * GSM handling was purged from kernel. For history, this is the way to go :
325 * - init : GPIO24_GSM_MOD_RESET_CMD = 0, GPIO114_GSM_nMOD_DTE_UART_STATE = 1
326 * GPIO88_GSM_nMOD_ON_CMD = 1, GPIO90_GSM_nMOD_OFF_CMD = 1
327 * - reset : GPIO24_GSM_MOD_RESET_CMD = 1, msleep(100),
328 * GPIO24_GSM_MOD_RESET_CMD = 0
329 * - turn on : GPIO88_GSM_nMOD_ON_CMD = 0, msleep(1000),
330 * GPIO88_GSM_nMOD_ON_CMD = 1
331 * - turn off : GPIO90_GSM_nMOD_OFF_CMD = 0, msleep(1000),
332 * GPIO90_GSM_nMOD_OFF_CMD = 1
333 */
334static int is_gsm_on(void)
335{
336 int is_on;
337
338 is_on = !!gpio_get_value(GPIO25_GSM_MOD_ON_STATE);
339 return is_on;
340}
341
342irqreturn_t gsm_on_irq(int irq, void *p)
343{
344 printk(KERN_DEBUG "Mioa701: GSM status changed to %s\n",
345 is_gsm_on() ? "on" : "off");
346 return IRQ_HANDLED;
347}
348
349struct gpio_ress gsm_gpios[] = {
350 MIO_GPIO_IN(GPIO25_GSM_MOD_ON_STATE, "GSM state"),
351 MIO_GPIO_IN(GPIO113_GSM_EVENT, "GSM event"),
352};
353
354static int __init gsm_init(void)
355{
356 int rc;
357
358 rc = mio_gpio_request(ARRAY_AND_SIZE(gsm_gpios));
359 if (rc)
360 goto err_gpio;
361 rc = request_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq,
362 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
363 "GSM XS200 Power Irq", NULL);
364 if (rc)
365 goto err_irq;
366
367 gpio_set_wake(GPIO113_GSM_EVENT, 1);
368 return 0;
369
370err_irq:
371 printk(KERN_ERR "Mioa701: Can't request GSM_ON irq\n");
372 mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios));
373err_gpio:
374 printk(KERN_ERR "Mioa701: gsm not available\n");
375 return rc;
376}
377
378static void gsm_exit(void)
379{
380 free_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), NULL);
381 mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios));
382}
383
384/*
385 * Bluetooth BRF6150 chip
386 *
387 * BT handling was purged from kernel. For history, this is the way to go :
388 * - turn on : GPIO83_BT_ON = 1
389 * - turn off : GPIO83_BT_ON = 0
390 */
391
392/*
393 * GPS Sirf Star III chip
394 *
395 * GPS handling was purged from kernel. For history, this is the way to go :
396 * - init : GPIO23_GPS_UNKNOWN1 = 1, GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
397 * GPIO106_GPS_UNKNOWN2 = 0, GPIO107_GPS_UNKNOWN3 = 0
398 * - turn on : GPIO27_GPS_RESET = 1, GPIO26_GPS_ON = 1
399 * - turn off : GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
400 */
401
402/*
403 * USB UDC
404 */
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100405static int is_usb_connected(void)
406{
Robert Jarzmikc96763d2008-11-18 20:23:32 +0100407 return !gpio_get_value(GPIO13_nUSB_DETECT);
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100408}
409
410static struct pxa2xx_udc_mach_info mioa701_udc_info = {
411 .udc_is_connected = is_usb_connected,
Robert Jarzmikcefdb2a2009-01-31 21:07:09 +0100412 .gpio_pullup = GPIO22_USB_ENABLE,
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100413};
414
Robert Jarzmik689b4fe2009-01-30 20:48:24 +0100415struct gpio_vbus_mach_info gpio_vbus_data = {
416 .gpio_vbus = GPIO13_nUSB_DETECT,
417 .gpio_vbus_inverted = 1,
418 .gpio_pullup = -1,
419};
420
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100421/*
422 * SDIO/MMC Card controller
423 */
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100424/**
425 * The card detect interrupt isn't debounced so we delay it by 250ms
426 * to give the card a chance to fully insert/eject.
427 */
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100428static struct pxamci_platform_data mioa701_mci_info = {
Eric Miaof97cab22010-04-14 07:00:42 +0800429 .detect_delay_ms = 250,
Robert Jarzmik7a648252009-07-06 22:16:42 +0200430 .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
431 .gpio_card_detect = GPIO15_SDIO_INSERT,
432 .gpio_card_ro = GPIO78_SDIO_RO,
433 .gpio_power = GPIO91_SDIO_EN,
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100434};
435
436/* FlashRAM */
437static struct resource strataflash_resource = {
438 .start = PXA_CS0_PHYS,
439 .end = PXA_CS0_PHYS + SZ_64M - 1,
440 .flags = IORESOURCE_MEM,
441};
442
443static struct physmap_flash_data strataflash_data = {
444 .width = 2,
445 /* .set_vpp = mioa701_set_vpp, */
446};
447
448static struct platform_device strataflash = {
449 .name = "physmap-flash",
450 .id = -1,
451 .resource = &strataflash_resource,
452 .num_resources = 1,
453 .dev = {
454 .platform_data = &strataflash_data,
455 },
456};
457
458/*
459 * Suspend/Resume bootstrap management
460 *
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300461 * MIO A701 reboot sequence is highly ROM dependent. From the one dissassembled,
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100462 * this sequence is as follows :
463 * - disables interrupts
464 * - initialize SDRAM (self refresh RAM into active RAM)
465 * - initialize GPIOs (depends on value at 0xa020b020)
466 * - initialize coprossessors
467 * - if edge detect on PWR_SCL(GPIO3), then proceed to cold start
468 * - or if value at 0xa020b000 not equal to 0x0f0f0f0f, proceed to cold start
469 * - else do a resume, ie. jump to addr 0xa0100000
470 */
471#define RESUME_ENABLE_ADDR 0xa020b000
472#define RESUME_ENABLE_VAL 0x0f0f0f0f
473#define RESUME_BT_ADDR 0xa020b020
474#define RESUME_UNKNOWN_ADDR 0xa020b024
475#define RESUME_VECTOR_ADDR 0xa0100000
476#define BOOTSTRAP_WORDS mioa701_bootstrap_lg/4
477
478static u32 *save_buffer;
479
480static void install_bootstrap(void)
481{
482 int i;
483 u32 *rom_bootstrap = phys_to_virt(RESUME_VECTOR_ADDR);
484 u32 *src = &mioa701_bootstrap;
485
486 for (i = 0; i < BOOTSTRAP_WORDS; i++)
487 rom_bootstrap[i] = src[i];
488}
489
490
Rafael J. Wysocki2eaa03b2011-04-22 22:03:11 +0200491static int mioa701_sys_suspend(void)
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100492{
493 int i = 0, is_bt_on;
494 u32 *mem_resume_vector = phys_to_virt(RESUME_VECTOR_ADDR);
495 u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
496 u32 *mem_resume_bt = phys_to_virt(RESUME_BT_ADDR);
497 u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR);
498
499 /* Devices prepare suspend */
Robert Jarzmik844c6f62008-11-17 20:29:04 +0100500 is_bt_on = !!gpio_get_value(GPIO83_BT_ON);
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100501 pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
502 is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
503
504 for (i = 0; i < BOOTSTRAP_WORDS; i++)
505 save_buffer[i] = mem_resume_vector[i];
506 save_buffer[i++] = *mem_resume_enabler;
507 save_buffer[i++] = *mem_resume_bt;
508 save_buffer[i++] = *mem_resume_unknown;
509
510 *mem_resume_enabler = RESUME_ENABLE_VAL;
511 *mem_resume_bt = is_bt_on;
512
513 install_bootstrap();
514 return 0;
515}
516
Rafael J. Wysocki2eaa03b2011-04-22 22:03:11 +0200517static void mioa701_sys_resume(void)
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100518{
519 int i = 0;
520 u32 *mem_resume_vector = phys_to_virt(RESUME_VECTOR_ADDR);
521 u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
522 u32 *mem_resume_bt = phys_to_virt(RESUME_BT_ADDR);
523 u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR);
524
525 for (i = 0; i < BOOTSTRAP_WORDS; i++)
526 mem_resume_vector[i] = save_buffer[i];
527 *mem_resume_enabler = save_buffer[i++];
528 *mem_resume_bt = save_buffer[i++];
529 *mem_resume_unknown = save_buffer[i++];
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100530}
531
Rafael J. Wysocki2eaa03b2011-04-22 22:03:11 +0200532static struct syscore_ops mioa701_syscore_ops = {
533 .suspend = mioa701_sys_suspend,
534 .resume = mioa701_sys_resume,
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100535};
536
537static int __init bootstrap_init(void)
538{
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100539 int save_size = mioa701_bootstrap_lg + (sizeof(u32) * 3);
540
Rafael J. Wysocki2eaa03b2011-04-22 22:03:11 +0200541 register_syscore_ops(&mioa701_syscore_ops);
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100542
543 save_buffer = kmalloc(save_size, GFP_KERNEL);
544 if (!save_buffer)
545 return -ENOMEM;
546 printk(KERN_INFO "MioA701: allocated %d bytes for bootstrap\n",
547 save_size);
548 return 0;
549}
550
551static void bootstrap_exit(void)
552{
553 kfree(save_buffer);
Rafael J. Wysocki2eaa03b2011-04-22 22:03:11 +0200554 unregister_syscore_ops(&mioa701_syscore_ops);
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100555
556 printk(KERN_CRIT "Unregistering mioa701 suspend will hang next"
557 "resume !!!\n");
558}
559
560/*
561 * Power Supply
562 */
563static char *supplicants[] = {
564 "mioa701_battery"
565};
566
Robert Jarzmik4aa89f92008-11-15 16:09:59 +0100567static int is_ac_connected(void)
568{
569 return gpio_get_value(GPIO96_AC_DETECT);
570}
571
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100572static void mioa701_set_charge(int flags)
573{
Robert Jarzmikc96763d2008-11-18 20:23:32 +0100574 gpio_set_value(GPIO9_CHARGE_EN, (flags == PDA_POWER_CHARGE_USB));
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100575}
576
577static struct pda_power_pdata power_pdata = {
Robert Jarzmik4aa89f92008-11-15 16:09:59 +0100578 .is_ac_online = is_ac_connected,
579 .is_usb_online = is_usb_connected,
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100580 .set_charge = mioa701_set_charge,
581 .supplied_to = supplicants,
582 .num_supplicants = ARRAY_SIZE(supplicants),
583};
584
585static struct resource power_resources[] = {
586 [0] = {
587 .name = "ac",
Robert Jarzmik4aa89f92008-11-15 16:09:59 +0100588 .start = gpio_to_irq(GPIO96_AC_DETECT),
589 .end = gpio_to_irq(GPIO96_AC_DETECT),
590 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
591 IORESOURCE_IRQ_LOWEDGE,
592 },
593 [1] = {
594 .name = "usb",
Robert Jarzmikc96763d2008-11-18 20:23:32 +0100595 .start = gpio_to_irq(GPIO13_nUSB_DETECT),
596 .end = gpio_to_irq(GPIO13_nUSB_DETECT),
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100597 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
598 IORESOURCE_IRQ_LOWEDGE,
599 },
600};
601
602static struct platform_device power_dev = {
603 .name = "pda-power",
604 .id = -1,
605 .resource = power_resources,
606 .num_resources = ARRAY_SIZE(power_resources),
607 .dev = {
608 .platform_data = &power_pdata,
609 },
610};
611
Marek Vasut241cf472010-06-04 03:07:33 +0200612static struct wm97xx_batt_pdata mioa701_battery_data = {
Robert Jarzmik4aa89f92008-11-15 16:09:59 +0100613 .batt_aux = WM97XX_AUX_ID1,
614 .temp_aux = -1,
615 .charge_gpio = -1,
616 .min_voltage = 0xc00,
617 .max_voltage = 0xfc0,
618 .batt_tech = POWER_SUPPLY_TECHNOLOGY_LION,
619 .batt_div = 1,
620 .batt_mult = 1,
621 .batt_name = "mioa701_battery",
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100622};
623
Marek Vasut241cf472010-06-04 03:07:33 +0200624static struct wm97xx_pdata mioa701_wm97xx_pdata = {
625 .batt_pdata = &mioa701_battery_data,
626};
627
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100628/*
Robert Jarzmik9752e142009-04-30 11:53:30 +0800629 * Voltage regulation
630 */
631static struct regulator_consumer_supply max1586_consumers[] = {
632 {
633 .supply = "vcc_core",
634 }
635};
636
637static struct regulator_init_data max1586_v3_info = {
638 .constraints = {
639 .name = "vcc_core range",
640 .min_uV = 1000000,
641 .max_uV = 1705000,
642 .always_on = 1,
643 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
644 },
645 .num_consumer_supplies = ARRAY_SIZE(max1586_consumers),
646 .consumer_supplies = max1586_consumers,
647};
648
649static struct max1586_subdev_data max1586_subdevs[] = {
650 { .name = "vcc_core", .id = MAX1586_V3,
651 .platform_data = &max1586_v3_info },
652};
653
654static struct max1586_platform_data max1586_info = {
655 .subdevs = max1586_subdevs,
656 .num_subdevs = ARRAY_SIZE(max1586_subdevs),
Philipp Zabele567b742009-05-28 07:15:17 +0200657 .v3_gain = MAX1586_GAIN_NO_R24, /* 700..1475 mV */
Robert Jarzmik9752e142009-04-30 11:53:30 +0800658};
659
660/*
Robert Jarzmik8e7ccdd2008-11-15 16:09:54 +0100661 * Camera interface
662 */
663struct pxacamera_platform_data mioa701_pxacamera_platform_data = {
664 .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
665 PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
666 .mclk_10khz = 5000,
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100667};
668
Robert Jarzmik9752e142009-04-30 11:53:30 +0800669static struct i2c_board_info __initdata mioa701_pi2c_devices[] = {
670 {
671 I2C_BOARD_INFO("max1586", 0x14),
672 .platform_data = &max1586_info,
673 },
674};
675
Robert Jarzmik8e7ccdd2008-11-15 16:09:54 +0100676/* Board I2C devices. */
Robert Jarzmik8dbed712010-06-02 23:29:50 +0200677static struct i2c_board_info mioa701_i2c_devices[] = {
Robert Jarzmik8e7ccdd2008-11-15 16:09:54 +0100678 {
Robert Jarzmik8e7ccdd2008-11-15 16:09:54 +0100679 I2C_BOARD_INFO("mt9m111", 0x5d),
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100680 },
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100681};
682
Guennadi Liakhovetskia48c24a2009-04-24 18:40:27 +0200683static struct soc_camera_link iclink = {
684 .bus_id = 0, /* Match id in pxa27x_device_camera in device.c */
685 .board_info = &mioa701_i2c_devices[0],
686 .i2c_adapter_id = 0,
Guennadi Liakhovetskia48c24a2009-04-24 18:40:27 +0200687};
688
Robert Jarzmik8e7ccdd2008-11-15 16:09:54 +0100689struct i2c_pxa_platform_data i2c_pdata = {
690 .fast_mode = 1,
691};
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100692
Robert Jarzmikcc8d2732009-04-13 16:07:55 +0200693static pxa2xx_audio_ops_t mioa701_ac97_info = {
694 .reset_gpio = 95,
Marek Vasut241cf472010-06-04 03:07:33 +0200695 .codec_pdata = { &mioa701_wm97xx_pdata, },
Robert Jarzmikcc8d2732009-04-13 16:07:55 +0200696};
697
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100698/*
699 * Mio global
700 */
701
702/* Devices */
703#define MIO_PARENT_DEV(var, strname, tparent, pdata) \
704static struct platform_device var = { \
705 .name = strname, \
706 .id = -1, \
707 .dev = { \
708 .platform_data = pdata, \
709 .parent = tparent, \
710 }, \
711};
712#define MIO_SIMPLE_DEV(var, strname, pdata) \
713 MIO_PARENT_DEV(var, strname, NULL, pdata)
714
715MIO_SIMPLE_DEV(mioa701_gpio_keys, "gpio-keys", &mioa701_gpio_keys_data)
716MIO_PARENT_DEV(mioa701_backlight, "pwm-backlight", &pxa27x_device_pwm0.dev,
717 &mioa701_backlight_data);
718MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info)
719MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL)
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100720MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL)
721MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL)
Robert Jarzmik689b4fe2009-01-30 20:48:24 +0100722MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data);
Guennadi Liakhovetskia48c24a2009-04-24 18:40:27 +0200723MIO_SIMPLE_DEV(mioa701_camera, "soc-camera-pdrv",&iclink);
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100724
725static struct platform_device *devices[] __initdata = {
726 &mioa701_gpio_keys,
727 &mioa701_backlight,
728 &mioa701_led,
729 &pxa2xx_pcm,
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100730 &mioa701_sound,
731 &power_dev,
732 &strataflash,
Robert Jarzmik689b4fe2009-01-30 20:48:24 +0100733 &gpio_vbus,
Guennadi Liakhovetskia48c24a2009-04-24 18:40:27 +0200734 &mioa701_camera,
Robert Jarzmik689b4fe2009-01-30 20:48:24 +0100735 &mioa701_board,
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100736};
737
738static void mioa701_machine_exit(void);
739
740static void mioa701_poweroff(void)
741{
742 mioa701_machine_exit();
Russell Kingbe093be2009-03-19 16:20:24 +0000743 arm_machine_restart('s', NULL);
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100744}
745
Russell Kingbe093be2009-03-19 16:20:24 +0000746static void mioa701_restart(char c, const char *cmd)
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100747{
748 mioa701_machine_exit();
Russell Kingbe093be2009-03-19 16:20:24 +0000749 arm_machine_restart('s', cmd);
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100750}
751
Eric Miao18473472009-06-07 23:05:45 +0800752static struct gpio_ress global_gpios[] = {
Robert Jarzmikc96763d2008-11-18 20:23:32 +0100753 MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"),
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100754 MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
Robert Jarzmik7a648252009-07-06 22:16:42 +0200755 MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power"),
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100756};
757
758static void __init mioa701_machine_init(void)
759{
760 PSLR = 0xff100000; /* SYSDEL=125ms, PWRDEL=125ms, PSLR_SL_ROD=1 */
761 PCFR = PCFR_DC_EN | PCFR_GPR_EN | PCFR_OPDE;
762 RTTR = 32768 - 1; /* Reset crazy WinCE value */
763 UP2OCR = UP2OCR_HXOE;
764
765 pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
Russell Kingcc155c62009-11-09 13:34:08 +0800766 pxa_set_ffuart_info(NULL);
767 pxa_set_btuart_info(NULL);
768 pxa_set_stuart_info(NULL);
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100769 mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
770 bootstrap_init();
Russell King - ARM Linux4321e1a2011-02-15 15:37:30 +0800771 pxa_set_fb_info(NULL, &mioa701_pxafb_info);
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100772 pxa_set_mci_info(&mioa701_mci_info);
773 pxa_set_keypad_info(&mioa701_keypad_info);
Robert Jarzmikcefdb2a2009-01-31 21:07:09 +0100774 pxa_set_udc_info(&mioa701_udc_info);
Robert Jarzmikcc8d2732009-04-13 16:07:55 +0200775 pxa_set_ac97_info(&mioa701_ac97_info);
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100776 pm_power_off = mioa701_poweroff;
777 arm_pm_restart = mioa701_restart;
778 platform_add_devices(devices, ARRAY_SIZE(devices));
779 gsm_init();
Robert Jarzmik8e7ccdd2008-11-15 16:09:54 +0100780
Robert Jarzmik9752e142009-04-30 11:53:30 +0800781 i2c_register_board_info(1, ARRAY_AND_SIZE(mioa701_pi2c_devices));
Robert Jarzmik8e7ccdd2008-11-15 16:09:54 +0100782 pxa_set_i2c_info(&i2c_pdata);
Robert Jarzmik9752e142009-04-30 11:53:30 +0800783 pxa27x_set_i2c_power_info(NULL);
Robert Jarzmik8e7ccdd2008-11-15 16:09:54 +0100784 pxa_set_camera_info(&mioa701_pxacamera_platform_data);
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100785}
786
787static void mioa701_machine_exit(void)
788{
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100789 bootstrap_exit();
790 gsm_exit();
791}
792
793MACHINE_START(MIOA701, "MIO A701")
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100794 .boot_params = 0xa0000100,
Marek Vasut851982c2010-10-11 02:20:19 +0200795 .map_io = &pxa27x_map_io,
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100796 .init_irq = &pxa27x_init_irq,
Eric Miao8a97ae22011-05-18 21:30:04 +0800797 .handle_irq = &pxa27x_handle_irq,
Robert Jarzmikeda6f6e2008-08-17 09:34:30 +0100798 .init_machine = mioa701_machine_init,
799 .timer = &pxa_timer,
800MACHINE_END