blob: eb93fd0ec734760224a16e87c2be8b391f604b55 [file] [log] [blame]
Mauro Carvalho Chehabe53dd082007-09-15 07:38:47 -03001 Kernel Parameters
2 ~~~~~~~~~~~~~~~~~
Linus Torvalds1da177e2005-04-16 15:20:36 -07003
4The following is a consolidated list of the kernel parameters as implemented
5(mostly) by the __setup() macro and sorted into English Dictionary order
6(defined as ignoring all punctuation and sorting digits before letters in a
7case insensitive manner), and with descriptions where known.
8
9Module parameters for loadable modules are specified only as the
10parameter name with optional '=' and value as appropriate, such as:
11
12 modprobe usbcore blinkenlights=1
13
14Module parameters for modules that are built into the kernel image
15are specified on the kernel command line with the module name plus
16'.' plus parameter name, with '=' and value if appropriate, such as:
17
18 usbcore.blinkenlights=1
19
Randy Dunlapca1eda22009-05-06 16:02:58 -070020Hyphens (dashes) and underscores are equivalent in parameter names, so
21 log_buf_len=1M print-fatal-signals=1
22can also be entered as
23 log-buf-len=1M print_fatal_signals=1
24
25
Stefan Richtera901ebb2006-04-01 01:43:18 +020026This document may not be entirely up to date and comprehensive. The command
27"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
28module. Loadable modules, after being loaded into the running kernel, also
29reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
30parameters may be changed at runtime by the command
31"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
32
Stefan Richter6585fa82006-04-01 01:44:30 +020033The parameters listed below are only valid if certain kernel build options were
34enabled and if respective hardware is present. The text in square brackets at
35the beginning of each description states the restrictions within which a
36parameter is applicable:
Linus Torvalds1da177e2005-04-16 15:20:36 -070037
38 ACPI ACPI support is enabled.
Chuck Ebbertc99c1082007-07-27 10:46:20 +100039 AGP AGP (Accelerated Graphics Port) is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -070040 ALSA ALSA sound support is enabled.
41 APIC APIC support is enabled.
42 APM Advanced Power Management support is enabled.
Randy Dunlap16290242011-08-13 12:34:52 -070043 ARM ARM architecture is enabled.
Haavard Skinnemoene7ba1762007-10-10 14:58:29 +020044 AVR32 AVR32 architecture is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -070045 AX25 Appropriate AX.25 support is enabled.
Robin Getz0ae53642007-10-09 17:24:49 +080046 BLACKFIN Blackfin architecture is enabled.
Alan Cox9cfe2682011-01-25 14:18:38 +000047 DRM Direct Rendering Management support is enabled.
48 DYNAMIC_DEBUG Build in debug messages and enable them at runtime
Linus Torvalds1da177e2005-04-16 15:20:36 -070049 EDD BIOS Enhanced Disk Drive Services (EDD) is enabled
50 EFI EFI Partitioning (GPT) is enabled
51 EIDE EIDE/ATAPI support is enabled.
Mimi Zohar7102ebc2011-05-12 18:33:20 -040052 EVM Extended Verification Module
Linus Torvalds1da177e2005-04-16 15:20:36 -070053 FB The frame buffer device is enabled.
Randy Dunlap16290242011-08-13 12:34:52 -070054 FTRACE Function tracing enabled.
Peter Oberparleiter2521f2c2009-06-17 16:28:08 -070055 GCOV GCOV profiling is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -070056 HW Appropriate hardware is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -070057 IA-64 IA-64 architecture is enabled.
Mimi Zohar6146f0d2009-02-04 09:06:57 -050058 IMA Integrity measurement architecture is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -070059 IOSCHED More than one I/O scheduler is enabled.
Adrian Bunk41e2e8b2005-07-12 13:58:33 -070060 IP_PNP IP DHCP, BOOTP, or RARP is enabled.
Brian Haleyb0f83b22010-02-04 13:36:50 -080061 IPV6 IPv6 support is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -070062 ISAPNP ISA PnP code is enabled.
63 ISDN Appropriate ISDN support is enabled.
64 JOY Appropriate joystick support is enabled.
Jason Wessel84c08fd2010-05-20 21:04:24 -050065 KGDB Kernel debugger support is enabled.
Andre Przywarafef07aa2009-07-10 14:20:35 +020066 KVM Kernel Virtual Machine support is enabled.
Kristen Carlson Accardi11ef6972006-09-28 11:29:01 -070067 LIBATA Libata driver is enabled
Linus Torvalds1da177e2005-04-16 15:20:36 -070068 LP Printer support is enabled.
69 LOOP Loopback device support is enabled.
70 M68k M68k architecture is enabled.
71 These options have more detailed description inside of
72 Documentation/m68k/kernel-options.txt.
73 MCA MCA bus support is enabled.
74 MDA MDA console support is enabled.
Randy Dunlap16290242011-08-13 12:34:52 -070075 MIPS MIPS architecture is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -070076 MOUSE Appropriate mouse support is enabled.
Matthew Wilcox309e57d2006-03-05 22:33:34 -070077 MSI Message Signaled Interrupts (PCI).
Randy Dunlapc8facbb2007-07-31 00:37:40 -070078 MTD MTD (Memory Technology Device) support is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -070079 NET Appropriate network support is enabled.
80 NUMA NUMA support is enabled.
81 NFS Appropriate NFS support is enabled.
82 OSS OSS sound support is enabled.
Randy Dunlapc8facbb2007-07-31 00:37:40 -070083 PV_OPS A paravirtualized kernel is enabled.
84 PARIDE The ParIDE (parallel port IDE) subsystem is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -070085 PARISC The PA-RISC architecture is enabled.
86 PCI PCI bus support is enabled.
Randy Dunlap7f785762007-10-05 13:17:58 -070087 PCIE PCI Express support is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -070088 PCMCIA The PCMCIA subsystem is enabled.
89 PNP Plug & Play support is enabled.
90 PPC PowerPC architecture is enabled.
91 PPT Parallel port support is enabled.
92 PS2 Appropriate PS/2 support is enabled.
93 RAM RAM disk support is enabled.
94 S390 S390 architecture is enabled.
95 SCSI Appropriate SCSI support is enabled.
Randy Dunlap163475f2010-08-14 12:36:14 -070096 A lot of drivers have their options described inside
97 the Documentation/scsi/ sub-directory.
James Morris20510f22007-10-16 23:31:32 -070098 SECURITY Different security models are enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -070099 SELINUX SELinux support is enabled.
John Johansenc1c124e2010-07-29 14:48:09 -0700100 APPARMOR AppArmor support is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700101 SERIAL Serial support is enabled.
Paul Mundte523d932007-02-28 18:30:01 +0900102 SH SuperH architecture is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700103 SMP The kernel is an SMP kernel.
104 SPARC Sparc architecture is enabled.
David Brownell77437fd2008-07-23 21:28:33 -0700105 SWSUSP Software suspend (hibernation) is enabled.
106 SUSPEND System suspend states are enabled.
Rajiv Andrade225a9be2010-03-25 00:55:32 -0300107 TPM TPM drivers are enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700108 TS Appropriate touchscreen support is enabled.
Alan Sternd4f373e2008-11-10 14:07:45 -0500109 UMS USB Mass Storage support is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700110 USB USB support is enabled.
111 USBHID USB Human Interface Device support is enabled.
112 V4L Video For Linux support is enabled.
113 VGA The VGA console has been enabled.
114 VT Virtual terminal support is enabled.
115 WDT Watchdog support is enabled.
116 XT IBM PC/XT MFM hard disk support is enabled.
Alan Coxcd4f0ef2007-07-31 00:37:59 -0700117 X86-32 X86-32, aka i386 architecture is enabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700118 X86-64 X86-64 architecture is enabled.
119 More X86-64 boot options can be found in
Uwe Hermann71cced62008-10-20 09:32:21 -0700120 Documentation/x86/x86_64/boot-options.txt .
Randy Dunlap16290242011-08-13 12:34:52 -0700121 X86 Either 32-bit or 64-bit x86 (same as X86-32+X86-64)
Stefano Stabellinic1c54132010-05-14 12:44:30 +0100122 XEN Xen support is enabled
Linus Torvalds1da177e2005-04-16 15:20:36 -0700123
124In addition, the following text indicates that the option:
125
126 BUGS= Relates to possible processor bugs on the said processor.
127 KNL Is a kernel start-up parameter.
128 BOOT Is a boot loader parameter.
129
130Parameters denoted with BOOT are actually interpreted by the boot
131loader, and have no meaning to the kernel directly.
132Do not modify the syntax of boot loader parameters without extreme
Kyle McMartin954a8b82009-02-19 16:48:14 -0500133need or coordination with <Documentation/x86/boot.txt>.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700134
Karsten Weiss55588702007-02-13 13:26:21 +0100135There are also arch-specific kernel-parameters not documented here.
Uwe Hermann71cced62008-10-20 09:32:21 -0700136See for example <Documentation/x86/x86_64/boot-options.txt>.
Karsten Weiss55588702007-02-13 13:26:21 +0100137
Linus Torvalds1da177e2005-04-16 15:20:36 -0700138Note that ALL kernel parameters listed below are CASE SENSITIVE, and that
139a trailing = on the name of any parameter states that that parameter will
140be entered as an environment variable, whereas its absence indicates that
141it will appear as a kernel argument readable via /proc/cmdline by programs
142running once the system is up.
143
jens m. noedler9c4751f2006-09-29 02:00:27 -0700144The number of kernel parameters is not limited, but the length of the
145complete command line (parameters including spaces etc.) is limited to
146a fixed number of characters. This limit depends on the architecture
147and is between 256 and 4096 characters. It is defined in the file
148./include/asm/setup.h as COMMAND_LINE_SIZE.
149
Ahmed S. Darwish7a19a232011-02-20 20:08:35 -0800150Finally, the [KMG] suffix is commonly described after a number of kernel
151parameter values. These 'K', 'M', and 'G' letters represent the _binary_
152multipliers 'Kilo', 'Mega', and 'Giga', equalling 2^10, 2^20, and 2^30
153bytes respectively. Such letter suffixes can also be entirely omitted.
154
jens m. noedler9c4751f2006-09-29 02:00:27 -0700155
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +0530156 acpi= [HW,ACPI,X86]
Bernhard Walle03d926f2007-03-06 02:29:44 -0800157 Advanced Configuration and Power Interface
Len Brown68ca4062010-02-19 00:09:22 -0500158 Format: { force | off | strict | noirq | rsdt }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700159 force -- enable ACPI if default was off
160 off -- disable ACPI if default was on
161 noirq -- do not use ACPI for IRQ routing
Randy Dunlapa9913042005-10-23 12:57:11 -0700162 strict -- Be less tolerant of platforms that are not
Linus Torvalds1da177e2005-04-16 15:20:36 -0700163 strictly ACPI specification compliant.
Zhao Yakui237889b2008-12-17 16:55:18 +0800164 rsdt -- prefer RSDT over (default) XSDT
Lin Mingaa2110c2010-04-08 14:34:27 +0800165 copy_dsdt -- copy DSDT to memory
Linus Torvalds1da177e2005-04-16 15:20:36 -0700166
Paul Bolle395cf962011-08-15 02:02:26 +0200167 See also Documentation/power/runtime_pm.txt, pci=noacpi
Linus Torvalds1da177e2005-04-16 15:20:36 -0700168
Takao Indoh4996c022011-07-14 18:05:21 -0400169 acpi_rsdp= [ACPI,EFI,KEXEC]
170 Pass the RSDP address to the kernel, mostly used
171 on machines running EFI runtime service to boot the
172 second kernel for kdump.
173
Len Browna1fdcc02007-03-11 03:26:14 -0400174 acpi_apic_instance= [ACPI, IOAPIC]
175 Format: <int>
176 2: use 2nd APIC table, if available
177 1,0: use 1st APIC table
Len Brown4e381a42007-03-30 14:16:10 -0400178 default: 0
Len Browna1fdcc02007-03-11 03:26:14 -0400179
Thomas Renningerc3d6de62008-08-01 17:37:55 +0200180 acpi_backlight= [HW,ACPI]
181 acpi_backlight=vendor
182 acpi_backlight=video
183 If set to vendor, prefer vendor specific driver
184 (e.g. thinkpad_acpi, sony_acpi, etc.) instead
185 of the ACPI video.ko driver.
186
Bjorn Helgaasa0d84a92008-11-07 16:58:05 -0700187 acpi.debug_layer= [HW,ACPI,ACPI_DEBUG]
188 acpi.debug_level= [HW,ACPI,ACPI_DEBUG]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700189 Format: <int>
Bjorn Helgaasa0d84a92008-11-07 16:58:05 -0700190 CONFIG_ACPI_DEBUG must be enabled to produce any ACPI
191 debug output. Bits in debug_layer correspond to a
192 _COMPONENT in an ACPI source file, e.g.,
193 #define _COMPONENT ACPI_PCI_COMPONENT
194 Bits in debug_level correspond to a level in
195 ACPI_DEBUG_PRINT statements, e.g.,
196 ACPI_DEBUG_PRINT((ACPI_DB_INFO, ...
Bjorn Helgaase76f4272008-11-13 17:30:13 -0600197 The debug_level mask defaults to "info". See
198 Documentation/acpi/debug.txt for more information about
199 debug layers and levels.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700200
Bjorn Helgaase76f4272008-11-13 17:30:13 -0600201 Enable processor driver info messages:
202 acpi.debug_layer=0x20000000
203 Enable PCI/PCI interrupt routing info messages:
204 acpi.debug_layer=0x400000
Bjorn Helgaasa0d84a92008-11-07 16:58:05 -0700205 Enable AML "Debug" output, i.e., stores to the Debug
206 object while interpreting AML:
207 acpi.debug_layer=0xffffffff acpi.debug_level=0x2
Bjorn Helgaasa0d84a92008-11-07 16:58:05 -0700208 Enable all messages related to ACPI hardware:
209 acpi.debug_layer=0x2 acpi.debug_level=0xffffffff
Thomas Renninger36eec5e2008-08-11 15:03:20 +0200210
Bjorn Helgaasa0d84a92008-11-07 16:58:05 -0700211 Some values produce so much output that the system is
212 unusable. The "log_buf_len" parameter may be useful
213 if you need to capture more output.
Zhang Ruif9891062007-04-24 13:53:22 +0800214
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700215 acpi_irq_balance [HW,ACPI]
216 ACPI will balance active IRQs
217 default in APIC mode
218
219 acpi_irq_nobalance [HW,ACPI]
220 ACPI will not move active IRQs (default)
221 default in PIC mode
222
223 acpi_irq_isa= [HW,ACPI] If irq_balance, mark listed IRQs used by ISA
224 Format: <irq>,<irq>...
225
226 acpi_irq_pci= [HW,ACPI] If irq_balance, clear listed IRQs for
227 use by PCI
228 Format: <irq>,<irq>...
229
230 acpi_no_auto_ssdt [HW,ACPI] Disable automatic loading of SSDT
231
232 acpi_os_name= [HW,ACPI] Tell ACPI BIOS the name of the OS
233 Format: To spoof as Windows 98: ="Microsoft Windows"
234
235 acpi_osi= [HW,ACPI] Modify list of supported OS interface strings
236 acpi_osi="string1" # add string1 -- only one string
237 acpi_osi="!string2" # remove built-in string2
238 acpi_osi= # disable all strings
239
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +0530240 acpi_pm_good [X86]
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700241 Override the pmtimer bug detection: force the kernel
242 to assume that this machine's pmtimer latches its value
243 and always returns good values.
244
Randy Dunlap4af94f32009-04-17 18:30:28 -0700245 acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode
246 Format: { level | edge | high | low }
247
248 acpi_serialize [HW,ACPI] force serialization of AML methods
249
250 acpi_skip_timer_override [HW,ACPI]
251 Recognize and ignore IRQ0/pin2 Interrupt Override.
252 For broken nForce2 BIOS resulting in XT-PIC timer.
253
254 acpi_sleep= [HW,ACPI] Sleep options
255 Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig,
Amerigo Wangc3b07952011-05-10 21:09:38 +0200256 old_ordering, nonvs, sci_force_enable }
Randy Dunlap4af94f32009-04-17 18:30:28 -0700257 See Documentation/power/video.txt for information on
258 s3_bios and s3_mode.
259 s3_beep is for debugging; it makes the PC's speaker beep
260 as soon as the kernel's real-mode entry point is called.
261 s4_nohwsig prevents ACPI hardware signature from being
262 used during resume from hibernation.
263 old_ordering causes the ACPI 1.0 ordering of the _PTS
264 control method, with respect to putting devices into
265 low power states, to be enforced (the ACPI 2.0 ordering
266 of _PTS is used by default).
Rafael J. Wysocki72ad5d72010-07-23 22:59:09 +0200267 nonvs prevents the kernel from saving/restoring the
268 ACPI NVS memory during suspend/hibernation and resume.
Zhang Ruid7f0eea2009-12-30 15:36:42 +0800269 sci_force_enable causes the kernel to set SCI_EN directly
270 on resume from S1/S3 (which is against the ACPI spec,
271 but some broken systems don't work without it).
Randy Dunlap4af94f32009-04-17 18:30:28 -0700272
273 acpi_use_timer_override [HW,ACPI]
274 Use timer override. For some broken Nvidia NF5 boards
275 that require a timer override, but don't have HPET
276
Luca Tettamanti7e905602009-03-30 00:01:27 +0200277 acpi_enforce_resources= [ACPI]
278 { strict | lax | no }
279 Check for resource conflicts between native drivers
280 and ACPI OperationRegions (SystemIO and SystemMemory
281 only). IO ports and memory declared in ACPI might be
282 used by the ACPI subsystem in arbitrary AML code and
283 can interfere with legacy drivers.
284 strict (default): access to resources claimed by ACPI
285 is denied; legacy drivers trying to access reserved
286 resources will fail to bind to device using them.
287 lax: access to resources claimed by ACPI is allowed;
288 legacy drivers trying to access reserved resources
289 will bind successfully but a warning message is logged.
290 no: ACPI OperationRegions are not marked as reserved,
291 no further checks are performed.
292
Randy Dunlap4af94f32009-04-17 18:30:28 -0700293 add_efi_memmap [EFI; X86] Include EFI memory map in
294 kernel's map of available physical RAM.
295
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700296 agp= [AGP]
297 { off | try_unsupported }
298 off: disable AGP support
299 try_unsupported: try to drive unsupported chipsets
300 (may crash computer or cause data corruption)
301
Randy Dunlapbcfde332010-06-07 17:10:38 -0700302 ALSA [HW,ALSA]
303 See Documentation/sound/alsa/alsa-parameters.txt
304
Russell Kingd944d542010-02-20 16:13:29 +0000305 alignment= [KNL,ARM]
306 Allow the default userspace alignment fault handler
307 behaviour to be specified. Bit 0 enables warnings,
308 bit 1 enables fixups, and bit 2 sends a segfault.
309
Borislav Petkovdfb09f92011-08-05 15:15:08 +0200310 align_va_addr= [X86-64]
311 Align virtual addresses by clearing slice [14:12] when
312 allocating a VMA at process creation time. This option
313 gives you up to 3% performance improvement on AMD F15h
314 machines (where it is enabled by default) for a
315 CPU-intensive style benchmark, and it can vary highly in
316 a microbenchmark depending on workload and compiler.
317
Borislav Petkov8360ee22011-11-21 12:10:19 +0100318 32: only for 32-bit processes
319 64: only for 64-bit processes
Borislav Petkovdfb09f92011-08-05 15:15:08 +0200320 on: enable for both 32- and 64-bit processes
321 off: disable for both 32- and 64-bit processes
322
Sedat Dilek89e0b9a2011-12-05 23:08:32 +0100323 amd_iommu= [HW,X86-64]
Joerg Roedel54b4cbd2008-06-26 21:28:10 +0200324 Pass parameters to the AMD IOMMU driver in the system.
325 Possible values are:
FUJITA Tomonoriafa9fdc2008-09-20 01:23:30 +0900326 fullflush - enable flushing of IO/TLB entries when
327 they are unmapped. Otherwise they are
328 flushed before they will be reused, which
329 is a lot of faster
Joerg Roedela5235722010-05-11 17:12:33 +0200330 off - do not initialize any AMD IOMMU found in
331 the system
Joerg Roedel5abcdba2011-12-01 15:49:45 +0100332 force_isolation - Force device isolation for all
333 devices. The IOMMU driver is not
334 allowed anymore to lift isolation
335 requirements as needed. This option
336 does not override iommu=pt
FUJITA Tomonoriafa9fdc2008-09-20 01:23:30 +0900337
Linus Torvalds1da177e2005-04-16 15:20:36 -0700338 amijoy.map= [HW,JOY] Amiga joystick support
339 Map of devices attached to JOY0DAT and JOY1DAT
340 Format: <a>,<b>
Paul Bolle395cf962011-08-15 02:02:26 +0200341 See also Documentation/input/joystick.txt
Linus Torvalds1da177e2005-04-16 15:20:36 -0700342
343 analog.map= [HW,JOY] Analog joystick and gamepad support
344 Specifies type or capabilities of an analog joystick
345 connected to one of 16 gameports
346 Format: <type1>,<type2>,..<type16>
347
Randy Dunlapa9913042005-10-23 12:57:11 -0700348 apc= [HW,SPARC]
349 Power management functions (SPARCstation-4/5 + deriv.)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700350 Format: noidle
351 Disable APC CPU standby support. SPARCstation-Fox does
352 not play well with APC CPU idle - disable it if you have
353 APC and your system crashes randomly.
354
Randy Dunlapca1eda22009-05-06 16:02:58 -0700355 apic= [APIC,X86-32] Advanced Programmable Interrupt Controller
Randy Dunlapc8facbb2007-07-31 00:37:40 -0700356 Change the output verbosity whilst booting
Linus Torvalds1da177e2005-04-16 15:20:36 -0700357 Format: { quiet (default) | verbose | debug }
358 Change the amount of debugging information output
359 when initialising the APIC and IO-APIC components.
Randy Dunlapa9913042005-10-23 12:57:11 -0700360
Brian Haleyb0f83b22010-02-04 13:36:50 -0800361 autoconf= [IPV6]
362 See Documentation/networking/ipv6.txt.
363
Cyrill Gorcunov9636bc02009-10-14 19:09:04 +0400364 show_lapic= [APIC,X86] Advanced Programmable Interrupt Controller
365 Limit apic dumping. The parameter defines the maximal
366 number of local apics being dumped. Also it is possible
367 to set it to "all" by meaning -- no limit here.
368 Format: { 1 (default) | 2 | ... | all }.
369 The parameter valid if only apic=debug or
370 apic=verbose is specified.
371 Example: apic=debug show_lapic=all
372
Linus Torvalds1da177e2005-04-16 15:20:36 -0700373 apm= [APM] Advanced Power Management
Pavel Machek71f77052008-07-04 09:59:43 -0700374 See header of arch/x86/kernel/apm_32.c.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700375
Linus Torvalds1da177e2005-04-16 15:20:36 -0700376 arcrimi= [HW,NET] ARCnet - "RIM I" (entirely mem-mapped) cards
377 Format: <io>,<irq>,<nodeID>
378
379 ataflop= [HW,M68k]
380
381 atarimouse= [HW,MOUSE] Atari Mouse
382
Linus Torvalds1da177e2005-04-16 15:20:36 -0700383 atkbd.extra= [HW] Enable extra LEDs and keys on IBM RapidAccess,
384 EzKey and similar keyboards
385
386 atkbd.reset= [HW] Reset keyboard during initialization
387
Randy Dunlapa9913042005-10-23 12:57:11 -0700388 atkbd.set= [HW] Select keyboard code set
389 Format: <int> (2 = AT (default), 3 = PS/2)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700390
391 atkbd.scroll= [HW] Enable scroll wheel on MS Office and similar
392 keyboards
393
394 atkbd.softraw= [HW] Choose between synthetic and real raw mode
395 Format: <bool> (0 = real, 1 = synthetic (default))
Randy Dunlapa9913042005-10-23 12:57:11 -0700396
397 atkbd.softrepeat= [HW]
398 Use software keyboard repeat
Linus Torvalds1da177e2005-04-16 15:20:36 -0700399
Randy Dunlap16290242011-08-13 12:34:52 -0700400 autotest [IA-64]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700401
Linus Torvalds1da177e2005-04-16 15:20:36 -0700402 baycom_epp= [HW,AX25]
403 Format: <io>,<mode>
Randy Dunlapa9913042005-10-23 12:57:11 -0700404
Linus Torvalds1da177e2005-04-16 15:20:36 -0700405 baycom_par= [HW,AX25] BayCom Parallel Port AX.25 Modem
406 Format: <io>,<mode>
407 See header of drivers/net/hamradio/baycom_par.c.
408
Randy Dunlapa9913042005-10-23 12:57:11 -0700409 baycom_ser_fdx= [HW,AX25]
410 BayCom Serial Port AX.25 Modem (Full Duplex Mode)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700411 Format: <io>,<irq>,<mode>[,<baud>]
412 See header of drivers/net/hamradio/baycom_ser_fdx.c.
413
Randy Dunlapa9913042005-10-23 12:57:11 -0700414 baycom_ser_hdx= [HW,AX25]
415 BayCom Serial Port AX.25 Modem (Half Duplex Mode)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700416 Format: <io>,<irq>,<mode>
417 See header of drivers/net/hamradio/baycom_ser_hdx.c.
418
Randy Dunlapbfe8df32007-10-16 01:23:46 -0700419 boot_delay= Milliseconds to delay each printk during boot.
420 Values larger than 10 seconds (10000) are changed to
421 no delay (0).
422 Format: integer
423
Andreas Herrmann35fc9082008-08-20 14:08:58 -0700424 bootmem_debug [KNL] Enable bootmem allocator debug messages.
425
Linus Torvalds1da177e2005-04-16 15:20:36 -0700426 bttv.card= [HW,V4L] bttv (bt848 + bt878 based grabber cards)
Randy Dunlapa9913042005-10-23 12:57:11 -0700427 bttv.radio= Most important insmod options are available as
428 kernel args too.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700429 bttv.pll= See Documentation/video4linux/bttv/Insmod-options
Paul Bolle395cf962011-08-15 02:02:26 +0200430 bttv.tuner=
Linus Torvalds1da177e2005-04-16 15:20:36 -0700431
Will Schmidt4e89a2d2010-09-28 15:33:12 +0000432 bulk_remove=off [PPC] This parameter disables the use of the pSeries
433 firmware feature for flushing multiple hpte entries
434 at a time.
435
Linus Torvalds1da177e2005-04-16 15:20:36 -0700436 c101= [NET] Moxa C101 synchronous serial card
437
Alan Coxcd4f0ef2007-07-31 00:37:59 -0700438 cachesize= [BUGS=X86-32] Override level 2 CPU cache size detection.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700439 Sometimes CPU hardware bugs make them report the cache
440 size incorrectly. The kernel will attempt work arounds
441 to fix known problems, but for some CPUs it is not
442 possible to determine what the correct size should be.
443 This option provides an override for these situations.
444
James Morris20510f22007-10-16 23:31:32 -0700445 capability.disable=
446 [SECURITY] Disable capabilities. This would normally
447 be used only if an alternative security model is to be
448 configured. Potentially dangerous and should only be
449 used if you are entirely sure of the consequences.
450
Sebastian Ott14ff56b2008-01-26 14:10:37 +0100451 ccw_timeout_log [S390]
452 See Documentation/s390/CommonIO for details.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700453
Paul Menage8bab8dd2008-04-04 14:29:57 -0700454 cgroup_disable= [KNL] Disable a particular controller
455 Format: {name of the controller(s) to disable}
456 {Currently supported controllers - "memory"}
457
Linus Torvalds1da177e2005-04-16 15:20:36 -0700458 checkreqprot [SELINUX] Set initial checkreqprot flag value.
459 Format: { "0" | "1" }
460 See security/selinux/Kconfig help text.
Randy Dunlapa9913042005-10-23 12:57:11 -0700461 0 -- check protection applied by kernel (includes
462 any implied execute protection).
Linus Torvalds1da177e2005-04-16 15:20:36 -0700463 1 -- check protection requested by application.
464 Default value is set via a kernel config option.
Randy Dunlapa9913042005-10-23 12:57:11 -0700465 Value can be changed at runtime via
466 /selinux/checkreqprot.
467
Sebastian Ott661ca0d2008-01-26 14:10:36 +0100468 cio_ignore= [S390]
469 See Documentation/s390/CommonIO for details.
470
Alan Coxcd4f0ef2007-07-31 00:37:59 -0700471 clock= [BUGS=X86-32, HW] gettimeofday clocksource override.
john stultz734efb42006-06-26 00:25:05 -0700472 [Deprecated]
Matt LaPlante3f6dee92006-10-03 22:45:33 +0200473 Forces specified clocksource (if available) to be used
john stultz734efb42006-06-26 00:25:05 -0700474 when calculating gettimeofday(). If specified
Matt LaPlante3f6dee92006-10-03 22:45:33 +0200475 clocksource is not available, it defaults to PIT.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700476 Format: { pit | tsc | cyclone | pmtmr }
477
John Stultz592913e2010-07-13 17:56:20 -0700478 clocksource= Override the default clocksource
Randy Dunlap3d6ac982007-05-23 13:58:16 -0700479 Format: <string>
480 Override the default clocksource and use the clocksource
481 with the name specified.
482 Some clocksource names to choose from, depending on
483 the platform:
484 [all] jiffies (this is the base, fallback clocksource)
485 [ACPI] acpi_pm
486 [ARM] imx_timer1,OSTS,netx_timer,mpu_timer2,
487 pxa_timer,timer3,32k_counter,timer0_1
488 [AVR32] avr32
Alok Kataria9863c902010-08-23 14:49:11 -0700489 [X86-32] pit,hpet,tsc;
Randy Dunlap3d6ac982007-05-23 13:58:16 -0700490 scx200_hrt on Geode; cyclone on IBM x440
491 [MIPS] MIPS
492 [PARISC] cr16
493 [S390] tod
494 [SH] SuperH
495 [SPARC64] tick
496 [X86-64] hpet,tsc
497
Andi Kleenac72e782008-01-30 13:33:21 +0100498 clearcpuid=BITNUM [X86]
499 Disable CPUID feature X for the kernel. See
Randy Dunlap07983f02009-01-06 14:42:41 -0800500 arch/x86/include/asm/cpufeature.h for the valid bit
501 numbers. Note the Linux specific bits are not necessarily
Andi Kleenac72e782008-01-30 13:33:21 +0100502 stable over kernel options, but the vendor specific
503 ones should be.
504 Also note that user programs calling CPUID directly
505 or using the feature without checking anything
506 will still see it. This just prevents it from
507 being used by the kernel or shown in /proc/cpuinfo.
508 Also note the kernel might malfunction if you disable
509 some critical bits.
510
Robert Jennings14f966e2009-04-15 05:55:32 +0000511 cmo_free_hint= [PPC] Format: { yes | no }
512 Specify whether pages are marked as being inactive
513 when they are freed. This is used in CMO environments
514 to determine OS memory pressure for page stealing by
515 a hypervisor.
516 Default: yes
517
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +0530518 code_bytes [X86] How many bytes of object code to print
Arjan van de Vena25bd942008-01-30 13:33:08 +0100519 in an oops report.
Chuck Ebbert86c41832007-02-13 13:26:25 +0100520 Range: 0 - 8192
521 Default: 64
522
Linus Torvalds1da177e2005-04-16 15:20:36 -0700523 com20020= [HW,NET] ARCnet - COM20020 chipset
Randy Dunlapa9913042005-10-23 12:57:11 -0700524 Format:
525 <io>[,<irq>[,<nodeID>[,<backplane>[,<ckp>[,<timeout>]]]]]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700526
527 com90io= [HW,NET] ARCnet - COM90xx chipset (IO-mapped buffers)
528 Format: <io>[,<irq>]
529
Randy Dunlapa9913042005-10-23 12:57:11 -0700530 com90xx= [HW,NET]
531 ARCnet - COM90xx chipset (memory-mapped buffers)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700532 Format: <io>[,<irq>[,<memstart>]]
533
534 condev= [HW,S390] console device
535 conmode=
Randy Dunlapa9913042005-10-23 12:57:11 -0700536
Linus Torvalds1da177e2005-04-16 15:20:36 -0700537 console= [KNL] Output console device and options.
538
539 tty<n> Use the virtual console device <n>.
540
541 ttyS<n>[,options]
Randy Dunlapf1a1c2d2006-03-25 03:08:17 -0800542 ttyUSB0[,options]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700543 Use the specified serial port. The options are of
Randy Dunlapf1a1c2d2006-03-25 03:08:17 -0800544 the form "bbbbpnf", where "bbbb" is the baud rate,
545 "p" is parity ("n", "o", or "e"), "n" is number of
546 bits, and "f" is flow control ("r" for RTS or
547 omit it). Default is "9600n8".
Linus Torvalds1da177e2005-04-16 15:20:36 -0700548
Randy Dunlapf1a1c2d2006-03-25 03:08:17 -0800549 See Documentation/serial-console.txt for more
550 information. See
551 Documentation/networking/netconsole.txt for an
552 alternative.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700553
Yinghai Lu18a8bd92007-07-15 23:37:59 -0700554 uart[8250],io,<addr>[,options]
555 uart[8250],mmio,<addr>[,options]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700556 Start an early, polled-mode console on the 8250/16550
557 UART at the specified I/O port or MMIO address,
558 switching to the matching ttyS device later. The
559 options are the same as for ttyS, above.
560
Samuel Thibaultf7511d52008-04-30 00:54:51 -0700561 If the device connected to the port is not a TTY but a braille
562 device, prepend "brl," before the device type, for instance
563 console=brl,ttyS0
564 For now, only VisioBraille is supported.
565
Daniel Mackf324edc2009-06-16 15:33:52 -0700566 consoleblank= [KNL] The console blank (screen saver) timeout in
567 seconds. Defaults to 10*60 = 10mins. A value of 0
568 disables the blank timer.
569
Hidehiro Kawai4cb0e112009-01-06 14:42:47 -0800570 coredump_filter=
571 [KNL] Change the default value for
572 /proc/<pid>/coredump_filter.
573 See also Documentation/filesystems/proc.txt.
574
Len Brown62027ae2011-04-01 18:13:10 -0400575 cpuidle.off=1 [CPU_IDLE]
576 disable the cpuidle sub-system
577
Linus Torvalds1da177e2005-04-16 15:20:36 -0700578 cpcihp_generic= [HW,PCI] Generic port I/O CompactPCI driver
Randy Dunlapa9913042005-10-23 12:57:11 -0700579 Format:
580 <first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700581
Ahmed S. Darwish6f21e642011-02-20 20:08:35 -0800582 crashkernel=size[KMG][@offset[KMG]]
583 [KNL] Using kexec, Linux can switch to a 'crash kernel'
584 upon panic. This parameter reserves the physical
585 memory region [offset, offset + size] for that kernel
586 image. If '@offset' is omitted, then a suitable offset
587 is selected automatically. Check
588 Documentation/kdump/kdump.txt for further details.
Eric W. Biedermandc009d92005-06-25 14:57:52 -0700589
Bernhard Wallefb391592007-10-18 23:41:02 -0700590 crashkernel=range1:size1[,range2:size2,...][@offset]
591 [KNL] Same as above, but depends on the memory
592 in the running system. The syntax of range is
593 start-[end] where start and end are both
594 a memory unit (amount[KMG]). See also
Ahmed S. Darwish6f21e642011-02-20 20:08:35 -0800595 Documentation/kdump/kdump.txt for an example.
Bernhard Wallefb391592007-10-18 23:41:02 -0700596
Linus Torvalds1da177e2005-04-16 15:20:36 -0700597 cs89x0_dma= [HW,NET]
598 Format: <dma>
599
600 cs89x0_media= [HW,NET]
601 Format: { rj45 | aui | bnc }
Randy Dunlapa9913042005-10-23 12:57:11 -0700602
Randy Dunlapa9913042005-10-23 12:57:11 -0700603 dasd= [HW,NET]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700604 See header of drivers/s390/block/dasd_devmap.c.
605
606 db9.dev[2|3]= [HW,JOY] Multisystem joystick support via parallel port
607 (one device per port)
608 Format: <port#>,<type>
609 See also Documentation/input/joystick-parport.txt
610
Thomas Renningera648ec02010-08-06 16:11:02 +0200611 ddebug_query= [KNL,DYNAMIC_DEBUG] Enable debug messages at early boot
612 time. See Documentation/dynamic-debug-howto.txt for
613 details.
614
Linus Torvalds1da177e2005-04-16 15:20:36 -0700615 debug [KNL] Enable kernel debugging (events log level).
616
Ingo Molnarcae2ed92006-07-03 00:24:48 -0700617 debug_locks_verbose=
618 [KNL] verbose self-tests
619 Format=<0|1>
620 Print debugging info while doing the locking API
621 self-tests.
622 We default to 0 (no extra messages), setting it to
623 1 will print _a lot_ more information - normally
624 only useful to kernel developers.
625
Thomas Gleixner3ac7fe52008-04-30 00:55:01 -0700626 debug_objects [KNL] Enable object debugging
627
Kyle McMartin3e8ebb52009-03-01 20:41:41 -0500628 no_debug_objects
629 [KNL] Disable object debugging
630
Stanislaw Gruszkac0a32fc52012-01-10 15:07:28 -0800631 debug_guardpage_minorder=
632 [KNL] When CONFIG_DEBUG_PAGEALLOC is set, this
633 parameter allows control of the order of pages that will
634 be intentionally kept free (and hence protected) by the
635 buddy allocator. Bigger value increase the probability
636 of catching random memory corruption, but reduce the
637 amount of memory for normal system use. The maximum
638 possible value is MAX_ORDER/2. Setting this parameter
639 to 1 or 2 should be enough to identify most random
640 memory corruption problems caused by bugs in kernel or
641 driver code when a CPU writes to (or reads from) a
642 random memory location. Note that there exists a class
643 of memory corruptions problems caused by buggy H/W or
644 F/W or by drivers badly programing DMA (basically when
645 memory is written at bus level and the CPU MMU is
646 bypassed) which are not detectable by
647 CONFIG_DEBUG_PAGEALLOC, hence this option will not help
648 tracking down these problems.
649
Thomas Gleixnerd3af01f2008-07-15 15:04:56 +0200650 debugpat [X86] Enable PAT debugging
651
Robert P. J. Day2d27a962008-02-03 15:18:45 +0200652 decnet.addr= [HW,NET]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700653 Format: <area>[,<node>]
654 See also Documentation/networking/decnet.txt.
655
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700656 default_hugepagesz=
657 [same as hugepagesz=] The size of the default
658 HugeTLB page size. This is the size represented by
659 the legacy /proc/ hugepages APIs, used for SHM, and
660 default size when mounting hugetlbfs filesystems.
661 Defaults to the default architecture's huge page size
662 if not specified.
Antonino A. Daplas55ff9782007-05-08 00:38:53 -0700663
Linus Torvalds1da177e2005-04-16 15:20:36 -0700664 dhash_entries= [KNL]
665 Set number of hash buckets for dentry cache.
Randy Dunlapa9913042005-10-23 12:57:11 -0700666
Linus Torvalds1da177e2005-04-16 15:20:36 -0700667 digi= [HW,SERIAL]
668 IO parameters + enable/disable command.
669
670 digiepca= [HW,SERIAL]
671 See drivers/char/README.epca and
Randy Dunlap31c00fc2008-11-13 21:33:24 +0000672 Documentation/serial/digiepca.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700673
Brian Haleyb0f83b22010-02-04 13:36:50 -0800674 disable= [IPV6]
675 See Documentation/networking/ipv6.txt.
676
Nishanth Aravamudan4e8b0cf2011-02-10 09:10:47 +0000677 disable_ddw [PPC/PSERIES]
678 Disable Dynamic DMA Window support. Use this if
679 to workaround buggy firmware.
680
Brian Haleyb0f83b22010-02-04 13:36:50 -0800681 disable_ipv6= [IPV6]
682 See Documentation/networking/ipv6.txt.
683
Yinghai Lu95ffa242008-04-29 03:52:33 -0700684 disable_mtrr_cleanup [X86]
Yinghai Lu95ffa242008-04-29 03:52:33 -0700685 The kernel tries to adjust MTRR layout from continuous
686 to discrete, to make X server driver able to add WB
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700687 entry later. This parameter disables that.
Yinghai Lu95ffa242008-04-29 03:52:33 -0700688
Yinghai Lu093af8d2008-01-30 13:33:32 +0100689 disable_mtrr_trim [X86, Intel and AMD only]
Jesse Barnes99fc8d42008-01-30 13:33:18 +0100690 By default the kernel will trim any uncacheable
691 memory out of your available memory pool based on
692 MTRR settings. This parameter disables that behavior,
693 possibly causing your machine to run very slowly.
694
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +0530695 disable_timer_pin_1 [X86]
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700696 Disable PIN 1 of APIC timer
697 Can be useful to work around chipset bugs.
698
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700699 dma_debug=off If the kernel is compiled with DMA_API_DEBUG support,
700 this option disables the debugging code at boot.
701
702 dma_debug_entries=<number>
703 This option allows to tune the number of preallocated
704 entries for DMA-API debugging code. One entry is
705 required per DMA-API allocation. Use this if the
706 DMA-API debugging code disables itself because the
707 architectural default is too low.
708
Joerg Roedel1745de52009-05-22 21:49:51 +0200709 dma_debug_driver=<driver_name>
710 With this option the DMA-API debugging driver
711 filter feature can be enabled at boot time. Just
712 pass the driver to filter for as the parameter.
713 The filter can be disabled or changed to another
714 driver later using sysfs.
715
Linus Torvalds1da177e2005-04-16 15:20:36 -0700716 dscc4.setup= [NET]
717
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700718 earlycon= [KNL] Output early console device and options.
719 uart[8250],io,<addr>[,options]
720 uart[8250],mmio,<addr>[,options]
Samium Gromoff1917ac72010-07-20 15:26:51 -0700721 uart[8250],mmio32,<addr>[,options]
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700722 Start an early, polled-mode console on the 8250/16550
723 UART at the specified I/O port or MMIO address.
Randy Dunlap16290242011-08-13 12:34:52 -0700724 MMIO inter-register address stride is either 8-bit
725 (mmio) or 32-bit (mmio32).
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700726 The options are the same as for ttyS, above.
727
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +0530728 earlyprintk= [X86,SH,BLACKFIN]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700729 earlyprintk=vga
730 earlyprintk=serial[,ttySn[,baudrate]]
Jason Wesselea3acb12009-09-24 09:08:30 -0500731 earlyprintk=ttySn[,baudrate]
Jason Wessel9780bc42009-08-20 15:39:57 -0500732 earlyprintk=dbgp[debugController#]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700733
Randy Dunlapa9913042005-10-23 12:57:11 -0700734 Append ",keep" to not disable it when the real console
Linus Torvalds1da177e2005-04-16 15:20:36 -0700735 takes over.
736
Yinghai Lu5c059172008-07-24 17:29:40 -0700737 Only vga or serial or usb debug port at a time.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700738
739 Currently only ttyS0 and ttyS1 are supported.
740
741 Interaction with the standard serial driver is not
742 very good.
743
744 The VGA output is eventually overwritten by the real
745 console.
746
Jason Wessel97311912010-05-20 21:04:30 -0500747 ekgdboc= [X86,KGDB] Allow early kernel console debugging
748 ekgdboc=kbd
749
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300750 This is designed to be used in conjunction with
Jason Wessel97311912010-05-20 21:04:30 -0500751 the boot argument: earlyprintk=vga
752
Linus Torvalds1da177e2005-04-16 15:20:36 -0700753 edd= [EDD]
Tim Gardner8c4dd602008-04-29 01:02:45 -0700754 Format: {"off" | "on" | "skip[mbr]"}
Linus Torvalds1da177e2005-04-16 15:20:36 -0700755
Linus Torvalds1da177e2005-04-16 15:20:36 -0700756 eisa_irq_edge= [PARISC,HW]
757 See header of drivers/parisc/eisa.c.
758
Alan Coxcd4f0ef2007-07-31 00:37:59 -0700759 elanfreq= [X86-32]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700760 See comment before function elanfreq_setup() in
Pavel Machek71f77052008-07-04 09:59:43 -0700761 arch/x86/kernel/cpu/cpufreq/elanfreq.c.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700762
763 elevator= [IOSCHED]
Randy Dunlap17a9e7b2010-11-11 12:09:59 +0100764 Format: {"cfq" | "deadline" | "noop"}
Paul Bolle395cf962011-08-15 02:02:26 +0200765 See Documentation/block/cfq-iosched.txt and
Randy Dunlapa9913042005-10-23 12:57:11 -0700766 Documentation/block/deadline-iosched.txt for details.
767
Michael Holzheud3bf37952011-10-30 15:16:37 +0100768 elfcorehdr=[size[KMG]@]offset[KMG] [IA64,PPC,SH,X86,S390]
Randy Dunlapa9913042005-10-23 12:57:11 -0700769 Specifies physical address of start of kernel core
Michael Holzheud3bf37952011-10-30 15:16:37 +0100770 image elf header and optionally the size. Generally
771 kexec loader will pass this option to capture kernel.
Vivek Goyalaac04b32006-01-09 20:51:47 -0800772 See Documentation/kdump/kdump.txt for details.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700773
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700774 enable_mtrr_cleanup [X86]
775 The kernel tries to adjust MTRR layout from continuous
776 to discrete, to make X server driver able to add WB
777 entry later. This parameter enables that.
778
Randy Dunlapca1eda22009-05-06 16:02:58 -0700779 enable_timer_pin_1 [X86]
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700780 Enable PIN 1 of APIC timer
781 Can be useful to work around chipset bugs
782 (in particular on some ATI chipsets).
783 The kernel tries to set a reasonable default.
784
Linus Torvalds1da177e2005-04-16 15:20:36 -0700785 enforcing [SELINUX] Set initial enforcing status.
786 Format: {"0" | "1"}
787 See security/selinux/Kconfig help text.
788 0 -- permissive (log only, no denials).
789 1 -- enforcing (deny and log).
790 Default value is 0.
791 Value can be changed at runtime via /selinux/enforce.
792
Huang Yinga08f82d2010-05-18 14:35:21 +0800793 erst_disable [ACPI]
794 Disable Error Record Serialization Table (ERST)
795 support.
796
Linus Torvalds1da177e2005-04-16 15:20:36 -0700797 ether= [HW,NET] Ethernet cards parameters
798 This option is obsoleted by the "netdev=" option, which
799 has equivalent usage. See its documentation for details.
800
Mimi Zohar7102ebc2011-05-12 18:33:20 -0400801 evm= [EVM]
802 Format: { "fix" }
803 Permit 'security.evm' to be updated regardless of
804 current integrity status.
805
Akinobu Mitade1ba092006-12-08 02:39:42 -0800806 failslab=
807 fail_page_alloc=
808 fail_make_request=[KNL]
809 General fault injection mechanism.
810 Format: <interval>,<probability>,<space>,<times>
Paul Bolle395cf962011-08-15 02:02:26 +0200811 See also Documentation/fault-injection/.
Akinobu Mitade1ba092006-12-08 02:39:42 -0800812
Linus Torvalds1da177e2005-04-16 15:20:36 -0700813 floppy= [HW]
Randy Dunlap31c00fc2008-11-13 21:33:24 +0000814 See Documentation/blockdev/floppy.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700815
Alex Chiangf13ae302008-05-08 14:03:23 -0600816 force_pal_cache_flush
817 [IA-64] Avoid check_sal_cache_flush which may hang on
818 buggy SAL_CACHE_FLUSH implementations. Using this
819 parameter will force ia64_sal_cache_flush to call
820 ia64_pal_cache_flush instead of SAL_CACHE_FLUSH.
821
Peter Zijlstrad9e54072008-11-01 19:57:37 +0100822 ftrace=[tracer]
Steven Rostedt2af15d62009-05-28 13:37:24 -0400823 [FTRACE] will set and start the specified tracer
Peter Zijlstrad9e54072008-11-01 19:57:37 +0100824 as early as possible in order to facilitate early
825 boot debugging.
826
Frederic Weisbeckercecbca92010-04-18 19:08:41 +0200827 ftrace_dump_on_oops[=orig_cpu]
Steven Rostedt2af15d62009-05-28 13:37:24 -0400828 [FTRACE] will dump the trace buffers on oops.
Frederic Weisbeckercecbca92010-04-18 19:08:41 +0200829 If no parameter is passed, ftrace will dump
830 buffers of all CPUs, but if you pass orig_cpu, it will
831 dump only the buffer of the CPU that triggered the
832 oops.
Steven Rostedt2af15d62009-05-28 13:37:24 -0400833
834 ftrace_filter=[function-list]
835 [FTRACE] Limit the functions traced by the function
836 tracer at boot up. function-list is a comma separated
837 list of functions. This list can be changed at run
838 time by the set_ftrace_filter file in the debugfs
Randy Dunlap16290242011-08-13 12:34:52 -0700839 tracing directory.
Steven Rostedt2af15d62009-05-28 13:37:24 -0400840
841 ftrace_notrace=[function-list]
842 [FTRACE] Do not trace the functions specified in
843 function-list. This list can be changed at run time
844 by the set_ftrace_notrace file in the debugfs
845 tracing directory.
Peter Zijlstrad9e54072008-11-01 19:57:37 +0100846
Stefan Assmann369bc182009-10-12 22:17:21 +0200847 ftrace_graph_filter=[function-list]
848 [FTRACE] Limit the top level callers functions traced
849 by the function graph tracer at boot up.
850 function-list is a comma separated list of functions
851 that can be changed at run time by the
852 set_graph_function file in the debugfs tracing directory.
853
Linus Torvalds1da177e2005-04-16 15:20:36 -0700854 gamecon.map[2|3]=
855 [HW,JOY] Multisystem joystick and NES/SNES/PSX pad
856 support via parallel port (up to 5 devices per port)
857 Format: <port#>,<pad1>,<pad2>,<pad3>,<pad4>,<pad5>
858 See also Documentation/input/joystick-parport.txt
859
860 gamma= [HW,DRM]
861
Yinghai Luaaf23042008-01-30 13:33:09 +0100862 gart_fix_e820= [X86_64] disable the fix e820 for K8 GART
863 Format: off | on
864 default: on
865
Peter Oberparleiter2521f2c2009-06-17 16:28:08 -0700866 gcov_persist= [GCOV] When non-zero (default), profiling data for
867 kernel modules is saved and remains accessible via
868 debugfs, even when the module is unloaded/reloaded.
869 When zero, profiling data is discarded and associated
870 debugfs files are removed at module unload time.
871
Linus Torvalds1da177e2005-04-16 15:20:36 -0700872 gpt [EFI] Forces disk with valid GPT signature but
873 invalid Protective MBR to be treated as GPT.
874
Linus Torvalds1da177e2005-04-16 15:20:36 -0700875 hashdist= [KNL,NUMA] Large hashes allocated during boot
876 are distributed across NUMA nodes. Defaults on
Randy Dunlap16290242011-08-13 12:34:52 -0700877 for 64-bit NUMA, off otherwise.
Randy Dunlapa9913042005-10-23 12:57:11 -0700878 Format: 0 | 1 (for off | on)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700879
880 hcl= [IA-64] SGI's Hardware Graph compatibility layer
881
882 hd= [EIDE] (E)IDE hard drive subsystem geometry
883 Format: <cyl>,<head>,<sect>
884
Huang Yingea8c0712010-05-18 14:35:15 +0800885 hest_disable [ACPI]
886 Disable Hardware Error Source Table (HEST) support;
887 corresponding firmware-first mode error processing
888 logic will be disabled.
889
Linus Torvalds1da177e2005-04-16 15:20:36 -0700890 highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact
891 size of <nn>. This works even on boxes that have no
892 highmem otherwise. This also works to reduce highmem
893 size on bigger boxes.
894
Thomas Gleixner54cdfdb2007-02-16 01:28:11 -0800895 highres= [KNL] Enable/disable high resolution timer mode.
896 Valid parameters: "on", "off"
897 Default: "on"
898
Linus Torvalds1da177e2005-04-16 15:20:36 -0700899 hisax= [HW,ISDN]
900 See Documentation/isdn/README.HiSax.
901
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700902 hlt [BUGS=ARM,SH]
903
904 hpet= [X86-32,HPET] option to control HPET usage
905 Format: { enable (default) | disable | force |
906 verbose }
907 disable: disable HPET and use PIT instead
908 force: allow force enabled of undocumented chips (ICH4,
909 VIA, nVidia)
910 verbose: show contents of HPET registers during setup
911
Andi Kleenb4718e62008-07-23 21:27:51 -0700912 hugepages= [HW,X86-32,IA-64] HugeTLB pages to allocate at boot.
913 hugepagesz= [HW,IA-64,PPC,X86-64] The size of the HugeTLB pages.
Jon Tollefson0d9ea752008-07-23 21:27:56 -0700914 On x86-64 and powerpc, this option can be specified
915 multiple times interleaved with hugepages= to reserve
916 huge pages of different sizes. Valid pages sizes on
917 x86-64 are 2M (when the CPU supports "pse") and 1G
918 (when the CPU supports the "pdpe1gb" cpuinfo flag)
Andi Kleenb4718e62008-07-23 21:27:51 -0700919 Note that 1GB pages can only be allocated at boot time
920 using hugepages= and not freed afterwards.
Paul Mundt6902aa82008-09-21 17:14:42 +0900921
Hendrik Brueckner555d61d2009-01-09 12:15:02 +0100922 hvc_iucv= [S390] Number of z/VM IUCV hypervisor console (HVC)
923 terminal devices. Valid values: 0..8
Hendrik Brueckner431429f2009-03-26 15:23:55 +0100924 hvc_iucv_allow= [S390] Comma-separated list of z/VM user IDs.
925 If specified, z/VM IUCV HVC accepts connections
926 from listed z/VM user IDs only.
Hendrik Bruecknercef71252008-12-25 13:39:55 +0100927
Fabio M. Di Nitto7bf69392011-03-22 16:34:20 -0700928 keep_bootcon [KNL]
929 Do not unregister boot console at start. This is only
930 useful for debugging when something happens in the window
931 between unregistering the boot console and initializing
932 the real console.
933
Jarkko Nikula3a853fb2009-03-23 18:07:47 -0700934 i2c_bus= [HW] Override the default board specific I2C bus speed
Jarkko Nikula79547632009-03-23 18:07:48 -0700935 or register an additional I2C bus that is not
936 registered from board initialization code.
Jarkko Nikula3a853fb2009-03-23 18:07:47 -0700937 Format:
938 <bus_id>,<clkrate>
939
Jiri Kosina36d95732008-10-06 02:51:09 -0400940 i8042.debug [HW] Toggle i8042 debug mode
Linus Torvalds1da177e2005-04-16 15:20:36 -0700941 i8042.direct [HW] Put keyboard port into non-translated mode
Matt LaPlante84eb8d02006-10-03 22:53:09 +0200942 i8042.dumbkbd [HW] Pretend that controller can only read data from
943 keyboard and cannot control its state
Linus Torvalds1da177e2005-04-16 15:20:36 -0700944 (Don't attempt to blink the leds)
945 i8042.noaux [HW] Don't check for auxiliary (== mouse) port
Dmitry Torokhov945ef0d2005-09-04 01:42:00 -0500946 i8042.nokbd [HW] Don't check/create keyboard port
Jiri Kosina75d08c72008-03-13 16:13:59 -0400947 i8042.noloop [HW] Disable the AUX Loopback command while probing
948 for the AUX port
Linus Torvalds1da177e2005-04-16 15:20:36 -0700949 i8042.nomux [HW] Don't check presence of an active multiplexing
950 controller
951 i8042.nopnp [HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
952 controllers
Jiri Kosinaf8313ef2011-01-08 01:37:26 -0800953 i8042.notimeout [HW] Ignore timeout condition signalled by conroller
Linus Torvalds1da177e2005-04-16 15:20:36 -0700954 i8042.reset [HW] Reset the controller during init and cleanup
955 i8042.unlock [HW] Unlock (ignore) the keylock
956
957 i810= [HW,DRM]
958
Dmitry Torokhove70c9d52005-06-25 14:54:25 -0700959 i8k.ignore_dmi [HW] Continue probing hardware even if DMI data
960 indicates that the driver is running on unsupported
961 hardware.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700962 i8k.force [HW] Activate i8k driver even if SMM BIOS signature
963 does not match list of supported models.
964 i8k.power_status
965 [HW] Report power status in /proc/i8k
966 (disabled by default)
967 i8k.restricted [HW] Allow controlling fans only if SYS_ADMIN
968 capability is set.
969
Linus Torvalds1da177e2005-04-16 15:20:36 -0700970 icn= [HW,ISDN]
971 Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
972
David Fries0af80c02009-02-25 20:28:21 +0100973 ide-core.nodma= [HW] (E)IDE subsystem
974 Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc
Bartlomiej Zolnierkiewicz075affc2009-06-07 13:52:52 +0200975 .vlb_clock .pci_clock .noflush .nohpa .noprobe .nowerr
976 .cdrom .chs .ignore_cable are additional options
Randy Dunlap1c10e932008-03-07 21:53:50 +0100977 See Documentation/ide/ide.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700978
Randy Dunlap0cb55ad2009-04-05 15:55:22 -0700979 ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem
980 Claim all unknown PCI IDE storage controllers.
981
Andi Kleenf039b752007-05-02 19:27:12 +0200982 idle= [X86]
Randy Dunlapada9cfd2008-12-19 10:57:32 -0800983 Format: idle=poll, idle=mwait, idle=halt, idle=nomwait
984 Poll forces a polling idle loop that can slightly
985 improve the performance of waking up a idle CPU, but
986 will use a lot of power and make the system run hot.
987 Not recommended.
988 idle=mwait: On systems which support MONITOR/MWAIT but
989 the kernel chose to not use it because it doesn't save
990 as much power as a normal idle loop, use the
991 MONITOR/MWAIT idle loop anyways. Performance should be
992 the same as idle=poll.
993 idle=halt: Halt is forced to be used for CPU idle.
Zhao Yakuic1e3b372008-06-24 17:58:53 +0800994 In such case C2/C3 won't be used again.
Randy Dunlapada9cfd2008-12-19 10:57:32 -0800995 idle=nomwait: Disable mwait for CPU C-states
Randy Dunlapa9913042005-10-23 12:57:11 -0700996
Ingo Molnar792908222006-12-06 20:40:51 -0800997 ignore_loglevel [KNL]
998 Ignore loglevel setting - this will print /all/
999 kernel messages to the console. Useful for debugging.
Yanmin Zhang0eca6b72011-10-31 17:11:25 -07001000 We also add it as printk module parameter, so users
1001 could change it dynamically, usually by
1002 /sys/module/printk/parameters/ignore_loglevel.
Ingo Molnar792908222006-12-06 20:40:51 -08001003
Linus Torvalds1da177e2005-04-16 15:20:36 -07001004 ihash_entries= [KNL]
1005 Set number of hash buckets for inode cache.
1006
Mimi Zohar3323eec92009-02-04 09:06:58 -05001007 ima_audit= [IMA]
1008 Format: { "0" | "1" }
1009 0 -- integrity auditing messages. (Default)
1010 1 -- enable informational integrity auditing messages.
1011
1012 ima_hash= [IMA]
Stephen Hemmingera9ed83a2009-09-17 14:14:45 -07001013 Format: { "sha1" | "md5" }
Mimi Zohar3323eec92009-02-04 09:06:58 -05001014 default: "sha1"
1015
Eric Paris5789ba32009-05-21 15:47:06 -04001016 ima_tcb [IMA]
1017 Load a policy which meets the needs of the Trusted
1018 Computing Base. This means IMA will measure all
1019 programs exec'd, files mmap'd for exec, and all files
1020 opened for read by uid=0.
1021
Linus Torvalds1da177e2005-04-16 15:20:36 -07001022 init= [KNL]
1023 Format: <full_path>
1024 Run specified binary instead of /sbin/init as init
1025 process.
1026
1027 initcall_debug [KNL] Trace initcalls as they are executed. Useful
1028 for working out where the kernel is dying during
1029 startup.
1030
1031 initrd= [BOOT] Specify the location of the initial ramdisk
1032
1033 inport.irq= [HW] Inport (ATI XL and Microsoft) busmouse driver
1034 Format: <irq>
1035
Keshavamurthy, Anil Sba395922007-10-21 16:41:49 -07001036 intel_iommu= [DMAR] Intel IOMMU driver (DMAR) option
Kyle McMartin0cd5c3c2009-02-04 14:29:19 -08001037 on
1038 Enable intel iommu driver.
Keshavamurthy, Anil Sba395922007-10-21 16:41:49 -07001039 off
1040 Disable intel iommu driver.
1041 igfx_off [Default Off]
1042 By default, gfx is mapped as normal device. If a gfx
1043 device has a dedicated DMAR unit, the DMAR unit is
1044 bypassed by not enabling DMAR with this option. In
1045 this case, gfx device will use physical address for
1046 DMA.
Keshavamurthy, Anil S7d3b03c2007-10-21 16:41:53 -07001047 forcedac [x86_64]
1048 With this option iommu will not optimize to look
Randy Dunlap16290242011-08-13 12:34:52 -07001049 for io virtual address below 32-bit forcing dual
Keshavamurthy, Anil S7d3b03c2007-10-21 16:41:53 -07001050 address cycle on pci bus for cards supporting greater
Randy Dunlap16290242011-08-13 12:34:52 -07001051 than 32-bit addressing. The default is to look
1052 for translation below 32-bit and if not available
Keshavamurthy, Anil S7d3b03c2007-10-21 16:41:53 -07001053 then look in the higher range.
mark gross5e0d2a62008-03-04 15:22:08 -08001054 strict [Default Off]
1055 With this option on every unmap_single operation will
1056 result in a hardware IOTLB flush operation as opposed
1057 to batching them for performance.
Youquan Song6dd9a7c2011-05-25 19:13:49 +01001058 sp_off [Default Off]
1059 By default, super page will be supported if Intel IOMMU
1060 has the capability. With this option, super page will
1061 not be supported.
Chris Wrightd1423d52010-07-20 11:06:49 -07001062 intremap= [X86-64, Intel-IOMMU]
Chris Wrightd1423d52010-07-20 11:06:49 -07001063 on enable Interrupt Remapping (default)
1064 off disable Interrupt Remapping
1065 nosid disable Source ID checking
Suresh Siddha41750d32011-08-23 17:05:18 -07001066 no_x2apic_optout
1067 BIOS x2APIC opt-out request will be ignored
Chris Wrightd1423d52010-07-20 11:06:49 -07001068
Randy Dunlap16290242011-08-13 12:34:52 -07001069 inttest= [IA-64]
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001070
1071 iomem= Disable strict checking of access to MMIO memory
1072 strict regions from userspace.
1073 relaxed
1074
1075 iommu= [x86]
1076 off
1077 force
1078 noforce
1079 biomerge
1080 panic
1081 nopanic
1082 merge
1083 nomerge
1084 forcesac
1085 soft
Alex Williamsonbcb71ab2011-10-21 15:56:24 -04001086 pt [x86, IA-64]
1087 group_mf [x86, IA-64]
1088
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001089
1090 io7= [HW] IO7 for Marvel based alpha systems
1091 See comment before marvel_specify_io7 in
1092 arch/alpha/kernel/core_marvel.c.
1093
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05301094 io_delay= [X86] I/O delay method
Ingo Molnar6e7c4022008-01-30 13:30:05 +01001095 0x80
1096 Standard port 0x80 based delay
1097 0xed
1098 Alternate port 0xed based delay (needed on some systems)
Rene Hermanb02aae92008-01-30 13:30:05 +01001099 udelay
Ingo Molnar6e7c4022008-01-30 13:30:05 +01001100 Simple two microseconds delay
1101 none
1102 No delay
Rene Hermanb02aae92008-01-30 13:30:05 +01001103
Linus Torvalds1da177e2005-04-16 15:20:36 -07001104 ip= [IP_PNP]
J. Bruce Fieldsdc7a0812009-10-27 14:41:35 -04001105 See Documentation/filesystems/nfs/nfsroot.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001106
1107 ip2= [HW] Set IO/IRQ pairs for up to 4 IntelliPort boards
Randy Dunlapc8facbb2007-07-31 00:37:40 -07001108 See comment before ip2_setup() in
1109 drivers/char/ip2/ip2base.c.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001110
Alan Cox200803d2005-06-28 20:45:18 -07001111 irqfixup [HW]
1112 When an interrupt is not handled search all handlers
1113 for it. Intended to get systems with badly broken
1114 firmware running.
1115
1116 irqpoll [HW]
1117 When an interrupt is not handled search all handlers
1118 for it. Also check all handlers each timer
1119 interrupt. Intended to get systems with badly broken
1120 firmware running.
1121
Linus Torvalds1da177e2005-04-16 15:20:36 -07001122 isapnp= [ISAPNP]
Randy Dunlapa9913042005-10-23 12:57:11 -07001123 Format: <RDP>,<reset>,<pci_scan>,<verbosity>
Linus Torvalds1da177e2005-04-16 15:20:36 -07001124
1125 isolcpus= [KNL,SMP] Isolate CPUs from the general scheduler.
Derek Fults22f2e282006-12-06 20:37:11 -08001126 Format:
1127 <cpu number>,...,<cpu number>
1128 or
Li Zefanb225d442008-11-06 12:53:39 -08001129 <cpu number>-<cpu number>
1130 (must be a positive range in ascending order)
Derek Fults22f2e282006-12-06 20:37:11 -08001131 or a mixture
1132 <cpu number>,...,<cpu number>-<cpu number>
Li Zefanb225d442008-11-06 12:53:39 -08001133
Linus Torvalds1da177e2005-04-16 15:20:36 -07001134 This option can be used to specify one or more CPUs
1135 to isolate from the general SMP balancing and scheduling
Li Zefanb225d442008-11-06 12:53:39 -08001136 algorithms. You can move a process onto or off an
1137 "isolated" CPU via the CPU affinity syscalls or cpuset.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001138 <cpu number> begins at 0 and the maximum value is
1139 "number of CPUs in system - 1".
1140
1141 This option is the preferred way to isolate CPUs. The
Randy Dunlapa9913042005-10-23 12:57:11 -07001142 alternative -- manually setting the CPU mask of all
1143 tasks in the system -- can cause problems and
1144 suboptimal load balancer performance.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001145
Randy Dunlapa9913042005-10-23 12:57:11 -07001146 iucv= [HW,NET]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001147
1148 js= [HW,JOY] Analog joystick
1149 See Documentation/input/joystick.txt.
1150
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001151 keepinitrd [HW,ARM]
1152
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05301153 kernelcore=nn[KMG] [KNL,X86,IA-64,PPC] This parameter
Mel Gormaned7ed362007-07-17 04:03:14 -07001154 specifies the amount of memory usable by the kernel
1155 for non-movable allocations. The requested amount is
1156 spread evenly throughout all nodes in the system. The
1157 remaining memory in each node is used for Movable
1158 pages. In the event, a node is too small to have both
1159 kernelcore and Movable pages, kernelcore pages will
1160 take priority and other nodes will have a larger number
1161 of kernelcore pages. The Movable zone is used for the
1162 allocation of pages that may be reclaimed or moved
1163 by the page migration subsystem. This means that
1164 HugeTLB pages may not be allocated from this zone.
1165 Note that allocations like PTEs-from-HighMem still
1166 use the HighMem zone if it exists, and the Normal
1167 zone if it does not.
1168
Jason Wessel4fe1da42010-05-20 21:04:31 -05001169 kgdbdbgp= [KGDB,HW] kgdb over EHCI usb debug port.
1170 Format: <Controller#>[,poll interval]
1171 The controller # is the number of the ehci usb debug
1172 port as it is probed via PCI. The poll interval is
1173 optional and is the number seconds in between
1174 each poll cycle to the debug port in case you need
1175 the functionality for interrupting the kernel with
1176 gdb or control-c on the dbgp connection. When
1177 not using this parameter you use sysrq-g to break into
1178 the kernel debugger.
1179
Jason Wessel84c08fd2010-05-20 21:04:24 -05001180 kgdboc= [KGDB,HW] kgdb over consoles.
Jason Wesselada64e42010-05-20 21:04:24 -05001181 Requires a tty driver that supports console polling,
1182 or a supported polling keyboard driver (non-usb).
Jason Wessel65b5ac12010-08-05 09:22:33 -05001183 Serial only format: <serial_device>[,baud]
1184 keyboard only format: kbd
1185 keyboard and serial format: kbd,<serial_device>[,baud]
1186 Optional Kernel mode setting:
1187 kms, kbd format: kms,kbd
1188 kms, kbd and serial format: kms,kbd,<ser_dev>[,baud]
Jason Wessel6cdf6e02008-04-17 20:05:38 +02001189
Jason Wessel84c08fd2010-05-20 21:04:24 -05001190 kgdbwait [KGDB] Stop kernel execution and enter the
1191 kernel debugger at the earliest opportunity.
1192
Florian Fainelli9bed90c62008-08-23 18:54:37 +02001193 kmac= [MIPS] korina ethernet MAC address.
1194 Configure the RouterBoard 532 series on-chip
1195 Ethernet adapter MAC address.
1196
Catalin Marinas04f70332009-06-11 13:22:39 +01001197 kmemleak= [KNL] Boot-time kmemleak enable/disable
1198 Valid arguments: on, off
1199 Default: on
1200
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05301201 kstack=N [X86] Print N words from the kernel stack
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001202 in oops dumps.
1203
Andre Przywarafef07aa2009-07-10 14:20:35 +02001204 kvm.ignore_msrs=[KVM] Ignore guest accesses to unhandled MSRs.
1205 Default is 0 (don't ignore, but inject #GP)
1206
Xiao Guangronga182d872010-09-20 22:17:48 +08001207 kvm.mmu_audit= [KVM] This is a R/W parameter which allows audit
1208 KVM MMU at runtime.
Andre Przywarafef07aa2009-07-10 14:20:35 +02001209 Default is 0 (off)
1210
Andre Przywarafef07aa2009-07-10 14:20:35 +02001211 kvm-amd.nested= [KVM,AMD] Allow nested virtualization in KVM/SVM.
Xiao Guangrong8475f942010-09-20 22:16:45 +08001212 Default is 1 (enabled)
Andre Przywarafef07aa2009-07-10 14:20:35 +02001213
1214 kvm-amd.npt= [KVM,AMD] Disable nested paging (virtualized MMU)
1215 for all guests.
Randy Dunlap16290242011-08-13 12:34:52 -07001216 Default is 1 (enabled) if in 64-bit or 32-bit PAE mode.
Andre Przywarafef07aa2009-07-10 14:20:35 +02001217
Andre Przywarafef07aa2009-07-10 14:20:35 +02001218 kvm-intel.ept= [KVM,Intel] Disable extended page tables
1219 (virtualized MMU) support on capable Intel chips.
1220 Default is 1 (enabled)
1221
1222 kvm-intel.emulate_invalid_guest_state=
1223 [KVM,Intel] Enable emulation of invalid guest states
1224 Default is 0 (disabled)
1225
1226 kvm-intel.flexpriority=
1227 [KVM,Intel] Disable FlexPriority feature (TPR shadow).
1228 Default is 1 (enabled)
1229
Sasha Levine1a72ae2011-08-09 14:28:35 +03001230 kvm-intel.nested=
1231 [KVM,Intel] Enable VMX nesting (nVMX).
1232 Default is 0 (disabled)
1233
Andre Przywarafef07aa2009-07-10 14:20:35 +02001234 kvm-intel.unrestricted_guest=
1235 [KVM,Intel] Disable unrestricted guest feature
1236 (virtualized real and unpaged mode) on capable
1237 Intel chips. Default is 1 (enabled)
1238
1239 kvm-intel.vpid= [KVM,Intel] Disable Virtual Processor Identification
1240 feature (tagged TLBs) on capable Intel chips.
1241 Default is 1 (enabled)
1242
Linus Torvalds1da177e2005-04-16 15:20:36 -07001243 l2cr= [PPC]
1244
Robert Brosea78bfbf2008-03-29 07:20:23 +11001245 l3cr= [PPC]
1246
Alan Coxcd4f0ef2007-07-31 00:37:59 -07001247 lapic [X86-32,APIC] Enable the local APIC even if BIOS
Randy Dunlapa9913042005-10-23 12:57:11 -07001248 disabled it.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001249
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05301250 lapic_timer_c2_ok [X86,APIC] trust the local apic timer
Randy Dunlapada9cfd2008-12-19 10:57:32 -08001251 in C2 power state.
Thomas Gleixnere585bef2007-03-23 16:08:01 +01001252
FD Camifcb71f62008-01-06 19:08:56 +01001253 libata.dma= [LIBATA] DMA control
1254 libata.dma=0 Disable all PATA and SATA DMA
1255 libata.dma=1 PATA and SATA Disk DMA only
1256 libata.dma=2 ATAPI (CDROM) DMA only
Randy Dunlap16290242011-08-13 12:34:52 -07001257 libata.dma=4 Compact Flash DMA only
FD Camifcb71f62008-01-06 19:08:56 +01001258 Combinations also work, so libata.dma=3 enables DMA
1259 for disks and CDROMs, but not CFs.
Randy Dunlap16290242011-08-13 12:34:52 -07001260
Michael Prokop20308872009-08-06 00:14:10 +02001261 libata.ignore_hpa= [LIBATA] Ignore HPA limit
1262 libata.ignore_hpa=0 keep BIOS limits (default)
1263 libata.ignore_hpa=1 ignore limits, using full disk
FD Camifcb71f62008-01-06 19:08:56 +01001264
Dave Jones78e70c22007-09-27 11:50:13 -04001265 libata.noacpi [LIBATA] Disables use of ACPI in libata suspend/resume
1266 when set.
1267 Format: <int>
1268
Tejun Heo33267322008-02-13 09:15:09 +09001269 libata.force= [LIBATA] Force configurations. The format is comma
1270 separated list of "[ID:]VAL" where ID is
Roman Fietze4c44f302010-04-21 12:17:12 +02001271 PORT[.DEVICE]. PORT and DEVICE are decimal numbers
Tejun Heo33267322008-02-13 09:15:09 +09001272 matching port, link or device. Basically, it matches
1273 the ATA ID string printed on console by libata. If
1274 the whole ID part is omitted, the last PORT and DEVICE
1275 values are used. If ID hasn't been specified yet, the
1276 configuration applies to all ports, links and devices.
1277
1278 If only DEVICE is omitted, the parameter applies to
1279 the port and all links and devices behind it. DEVICE
1280 number of 0 either selects the first device or the
1281 first fan-out link behind PMP device. It does not
1282 select the host link. DEVICE number of 15 selects the
1283 host link and device attached to it.
1284
1285 The VAL specifies the configuration to force. As long
1286 as there's no ambiguity shortcut notation is allowed.
1287 For example, both 1.5 and 1.5G would work for 1.5Gbps.
1288 The following configurations can be forced.
1289
1290 * Cable type: 40c, 80c, short40c, unk, ign or sata.
1291 Any ID with matching PORT is used.
1292
1293 * SATA link speed limit: 1.5Gbps or 3.0Gbps.
1294
1295 * Transfer mode: pio[0-7], mwdma[0-4] and udma[0-7].
1296 udma[/][16,25,33,44,66,100,133] notation is also
1297 allowed.
1298
1299 * [no]ncq: Turn on or off NCQ.
1300
Tejun Heo05944bd2008-08-13 20:19:09 +09001301 * nohrst, nosrst, norst: suppress hard, soft
1302 and both resets.
1303
Tejun Heo43c9c592010-05-23 12:59:11 +02001304 * dump_id: dump IDENTIFY data.
1305
Tejun Heo33267322008-02-13 09:15:09 +09001306 If there are multiple matching configurations changing
1307 the same attribute, the last one is used.
1308
Yinghai Lu95f72d12010-07-12 14:36:09 +10001309 memblock=debug [KNL] Enable memblock debug messages.
Randy Dunlap7c4be2532009-01-06 14:42:44 -08001310
Linus Torvalds1da177e2005-04-16 15:20:36 -07001311 load_ramdisk= [RAM] List of ramdisks to load from floppy
Randy Dunlap31c00fc2008-11-13 21:33:24 +00001312 See Documentation/blockdev/ramdisk.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001313
Randy Dunlapa6b25b62006-01-14 13:21:19 -08001314 lockd.nlm_grace_period=P [NFS] Assign grace period.
1315 Format: <integer>
Linus Torvalds1da177e2005-04-16 15:20:36 -07001316
Randy Dunlapa6b25b62006-01-14 13:21:19 -08001317 lockd.nlm_tcpport=N [NFS] Assign TCP port.
1318 Format: <integer>
1319
1320 lockd.nlm_timeout=T [NFS] Assign timeout value.
1321 Format: <integer>
1322
1323 lockd.nlm_udpport=M [NFS] Assign UDP port.
1324 Format: <integer>
Linus Torvalds1da177e2005-04-16 15:20:36 -07001325
1326 logibm.irq= [HW,MOUSE] Logitech Bus Mouse Driver
1327 Format: <irq>
1328
1329 loglevel= All Kernel Messages with a loglevel smaller than the
1330 console loglevel will be printed to the console. It can
1331 also be changed with klogd or other programs. The
1332 loglevels are defined as follows:
1333
1334 0 (KERN_EMERG) system is unusable
1335 1 (KERN_ALERT) action must be taken immediately
1336 2 (KERN_CRIT) critical conditions
1337 3 (KERN_ERR) error conditions
1338 4 (KERN_WARNING) warning conditions
1339 5 (KERN_NOTICE) normal but significant condition
1340 6 (KERN_INFO) informational
1341 7 (KERN_DEBUG) debug-level messages
1342
Randy Dunlapc756d082011-02-20 20:08:35 -08001343 log_buf_len=n[KMG] Sets the size of the printk ring buffer,
1344 in bytes. n must be a power of two. The default
1345 size is set in the kernel config file.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001346
Randy Dunlapaccaa242007-10-16 01:29:37 -07001347 logo.nologo [FB] Disables display of the built-in Linux logo.
1348 This may be used to provide more screen space for
1349 kernel log messages and is useful when debugging
1350 kernel boot problems.
1351
Linus Torvalds1da177e2005-04-16 15:20:36 -07001352 lp=0 [LP] Specify parallel ports to use, e.g,
1353 lp=port[,port...] lp=none,parport0 (lp0 not configured, lp1 uses
1354 lp=reset first parallel port). 'lp=0' disables the
1355 lp=auto printer driver. 'lp=reset' (which can be
1356 specified in addition to the ports) causes
1357 attached printers to be reset. Using
1358 lp=port1,port2,... specifies the parallel ports
1359 to associate lp devices with, starting with
1360 lp0. A port specification may be 'none' to skip
1361 that lp device, or a parport name such as
1362 'parport0'. Specifying 'lp=auto' instead of a
1363 port specification list means that device IDs
1364 from each port should be examined, to see if
1365 an IEEE 1284-compliant printer is attached; if
1366 so, the driver will manage that printer.
1367 See also header of drivers/char/lp.c.
1368
1369 lpj=n [KNL]
1370 Sets loops_per_jiffy to given constant, thus avoiding
1371 time-consuming boot-time autodetection (up to 250 ms per
1372 CPU). 0 enables autodetection (default). To determine
1373 the correct value for your kernel, boot with normal
1374 autodetection and see what value is printed. Note that
1375 on SMP systems the preset will be applied to all CPUs,
1376 which is likely to cause problems if your CPUs need
1377 significantly divergent settings. An incorrect value
1378 will cause delays in the kernel to be wrong, leading to
1379 unpredictable I/O errors and other breakage. Although
1380 unlikely, in the extreme case this might damage your
1381 hardware.
1382
1383 ltpc= [NET]
1384 Format: <io>,<irq>,<dma>
1385
Randy Dunlap16290242011-08-13 12:34:52 -07001386 machvec= [IA-64] Force the use of a particular machine-vector
Randy Dunlapa9913042005-10-23 12:57:11 -07001387 (machvec) in a generic kernel.
1388 Example: machvec=hpzx1_swiotlb
Linus Torvalds1da177e2005-04-16 15:20:36 -07001389
Wu Zhangjin3209e702009-07-02 23:27:12 +08001390 machtype= [Loongson] Share the same kernel image file between different
1391 yeeloong laptop.
1392 Example: machtype=lemote-yeeloong-2f-7inch
1393
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001394 max_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory greater
1395 than or equal to this physical address is ignored.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001396
1397 maxcpus= [SMP] Maximum number of processors that an SMP kernel
Len Brown61ec7562007-08-16 03:34:22 -04001398 should make use of. maxcpus=n : n >= 0 limits the
1399 kernel to using 'n' processors. n=0 is a special case,
1400 it is equivalent to "nosmp", which also disables
1401 the IO APIC.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001402
Kay Sieversd134b002011-07-31 22:08:04 +02001403 max_loop= [LOOP] The number of loop block devices that get
1404 (loop.max_loop) unconditionally pre-created at init time. The default
1405 number is configured by BLK_DEV_LOOP_MIN_COUNT. Instead
1406 of statically allocating a predefined number, loop
1407 devices can be requested on-demand with the
1408 /dev/loop-control interface.
Bob Picco2b2c3752005-06-29 18:00:00 -07001409
Linus Torvalds1da177e2005-04-16 15:20:36 -07001410 mcatest= [IA-64]
1411
Alan Coxcd4f0ef2007-07-31 00:37:59 -07001412 mce [X86-32] Machine Check Exception
Linus Torvalds1da177e2005-04-16 15:20:36 -07001413
Uwe Hermann71cced62008-10-20 09:32:21 -07001414 mce=option [X86-64] See Documentation/x86/x86_64/boot-options.txt
Andi Kleen909dd322007-10-17 18:04:38 +02001415
Linus Torvalds1da177e2005-04-16 15:20:36 -07001416 md= [HW] RAID subsystems devices and level
1417 See Documentation/md.txt.
Randy Dunlapa9913042005-10-23 12:57:11 -07001418
Linus Torvalds1da177e2005-04-16 15:20:36 -07001419 mdacon= [MDA]
1420 Format: <first>,<last>
1421 Specifies range of consoles to be captured by the MDA.
Randy Dunlapa9913042005-10-23 12:57:11 -07001422
Linus Torvalds1da177e2005-04-16 15:20:36 -07001423 mem=nn[KMG] [KNL,BOOT] Force usage of a specific amount of memory
1424 Amount of memory to be used when the kernel is not able
1425 to see the whole system memory or for test.
Alan Coxcd4f0ef2007-07-31 00:37:59 -07001426 [X86-32] Use together with memmap= to avoid physical
Linus Torvalds1da177e2005-04-16 15:20:36 -07001427 address space collisions. Without memmap= PCI devices
1428 could be placed at addresses belonging to unused RAM.
1429
Alan Coxcd4f0ef2007-07-31 00:37:59 -07001430 mem=nopentium [BUGS=X86-32] Disable usage of 4MB pages for kernel
Linus Torvalds1da177e2005-04-16 15:20:36 -07001431 memory.
1432
Paul Mundt6902aa82008-09-21 17:14:42 +09001433 memchunk=nn[KMG]
1434 [KNL,SH] Allow user to override the default size for
1435 per-device physically contiguous DMA buffers.
1436
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05301437 memmap=exactmap [KNL,X86] Enable setting of an exact
Linus Torvalds1da177e2005-04-16 15:20:36 -07001438 E820 memory map, as specified by the user.
1439 Such memmap=exactmap lines can be constructed based on
1440 BIOS output or other requirements. See the memmap=nn@ss
1441 option description.
1442
1443 memmap=nn[KMG]@ss[KMG]
1444 [KNL] Force usage of a specific region of memory
1445 Region of memory to be used, from ss to ss+nn.
1446
1447 memmap=nn[KMG]#ss[KMG]
1448 [KNL,ACPI] Mark specific memory as ACPI data.
1449 Region of memory to be used, from ss to ss+nn.
1450
1451 memmap=nn[KMG]$ss[KMG]
1452 [KNL,ACPI] Mark specific memory as reserved.
1453 Region of memory to be used, from ss to ss+nn.
Pavel Machek13128482008-03-24 12:29:43 -07001454 Example: Exclude memory from 0x18690000-0x1869ffff
1455 memmap=64K$0x18690000
1456 or
1457 memmap=0x10000$0x18690000
Linus Torvalds1da177e2005-04-16 15:20:36 -07001458
Jeremy Fitzhardinge9f077872008-09-07 01:51:34 -07001459 memory_corruption_check=0/1 [X86]
1460 Some BIOSes seem to corrupt the first 64k of
1461 memory when doing things like suspend/resume.
1462 Setting this option will scan the memory
1463 looking for corruption. Enabling this will
1464 both detect corruption and prevent the kernel
1465 from using the memory being corrupted.
1466 However, its intended as a diagnostic tool; if
1467 repeatable BIOS-originated corruption always
1468 affects the same memory, you can use memmap=
1469 to prevent the kernel from using that memory.
1470
1471 memory_corruption_check_size=size [X86]
1472 By default it checks for corruption in the low
1473 64k, making this memory unavailable for normal
1474 use. Use this parameter to scan for
1475 corruption in more or less memory.
1476
1477 memory_corruption_check_period=seconds [X86]
1478 By default it checks for corruption every 60
1479 seconds. Use this parameter to check at some
1480 other rate. 0 disables periodic checking.
1481
Yinghai Lucaadbdc2008-07-15 00:03:44 -07001482 memtest= [KNL,X86] Enable memtest
Yinghai Luc64df702008-03-21 18:56:19 -07001483 Format: <integer>
Yinghai Luc64df702008-03-21 18:56:19 -07001484 default : 0 <disable>
Andreas Herrmann9e5f6cf2009-02-25 11:30:45 +01001485 Specifies the number of memtest passes to be
1486 performed. Each pass selects another test
1487 pattern from a given set of patterns. Memtest
1488 fills the memory with this pattern, validates
1489 memory contents and reserves bad memory
1490 regions that are detected.
Yinghai Luc64df702008-03-21 18:56:19 -07001491
Linus Torvalds1da177e2005-04-16 15:20:36 -07001492 meye.*= [HW] Set MotionEye Camera parameters
1493 See Documentation/video4linux/meye.txt.
1494
Andres Salomon8f368812007-10-12 23:04:06 +02001495 mfgpt_irq= [IA-32] Specify the IRQ to use for the
1496 Multi-Function General Purpose Timers on AMD Geode
1497 platforms.
1498
Willy Tarreaue6c4dc62008-01-30 13:33:33 +01001499 mfgptfix [X86-32] Fix MFGPT timers on AMD Geode platforms when
1500 the BIOS has incorrectly applied a workaround. TinyBIOS
1501 version 0.98 is known to be affected, 0.99 fixes the
1502 problem by letting the user disable the workaround.
1503
Linus Torvalds1da177e2005-04-16 15:20:36 -07001504 mga= [HW,DRM]
1505
Randy Dunlap1c207f92008-11-19 15:36:16 -08001506 min_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory below this
1507 physical address is ignored.
1508
Michel Pollet39f45d72009-05-20 11:10:31 +01001509 mini2440= [ARM,HW,KNL]
1510 Format:[0..2][b][c][t]
1511 Default: "0tb"
1512 MINI2440 configuration specification:
1513 0 - The attached screen is the 3.5" TFT
1514 1 - The attached screen is the 7" TFT
1515 2 - The VGA Shield is attached (1024x768)
1516 Leaving out the screen size parameter will not load
1517 the TFT driver, and the framebuffer will be left
1518 unconfigured.
1519 b - Enable backlight. The TFT backlight pin will be
1520 linked to the kernel VESA blanking code and a GPIO
1521 LED. This parameter is not necessary when using the
1522 VGA shield.
1523 c - Enable the s3c camera interface.
1524 t - Reserved for enabling touchscreen support. The
1525 touchscreen support is not enabled in the mainstream
1526 kernel as of 2.6.30, a preliminary port can be found
1527 in the "bleeding edge" mini2440 support kernel at
1528 http://repo.or.cz/w/linux-2.6/mini2440.git
1529
Mel Gorman6b74ab92008-07-23 21:26:49 -07001530 mminit_loglevel=
1531 [KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
1532 parameter allows control of the logging verbosity for
1533 the additional memory initialisation checks. A value
1534 of 0 disables mminit logging and a level of 4 will
1535 log everything. Information is printed at KERN_DEBUG
1536 so loglevel=8 may also need to be specified.
1537
Linus Torvalds1da177e2005-04-16 15:20:36 -07001538 mousedev.tap_time=
1539 [MOUSE] Maximum time between finger touching and
1540 leaving touchpad surface for touch to be considered
1541 a tap and be reported as a left button click (for
1542 touchpads working in absolute mode only).
1543 Format: <msecs>
1544 mousedev.xres= [MOUSE] Horizontal screen resolution, used for devices
1545 reporting absolute coordinates, such as tablets
1546 mousedev.yres= [MOUSE] Vertical screen resolution, used for devices
1547 reporting absolute coordinates, such as tablets
1548
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05301549 movablecore=nn[KMG] [KNL,X86,IA-64,PPC] This parameter
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001550 is similar to kernelcore except it specifies the
1551 amount of memory used for migratable allocations.
1552 If both kernelcore and movablecore is specified,
1553 then kernelcore will be at *least* the specified
1554 value but may be more. If movablecore on its own
1555 is specified, the administrator must be careful
1556 that the amount of memory usable for all allocations
1557 is not too small.
1558
Linus Torvalds1da177e2005-04-16 15:20:36 -07001559 MTD_Partition= [MTD]
1560 Format: <name>,<region-number>,<size>,<offset>
1561
Randy Dunlapa9913042005-10-23 12:57:11 -07001562 MTD_Region= [MTD] Format:
1563 <name>,<region-number>[,<base>,<size>,<buswidth>,<altbuswidth>]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001564
1565 mtdparts= [MTD]
Randy Dunlapc8facbb2007-07-31 00:37:40 -07001566 See drivers/mtd/cmdlinepart.c.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001567
Will Schmidt4e89a2d2010-09-28 15:33:12 +00001568 multitce=off [PPC] This parameter disables the use of the pSeries
1569 firmware feature for updating multiple TCE entries
1570 at a time.
1571
Rohit Hagargundgi5988af22009-05-12 13:46:57 -07001572 onenand.bdry= [HW,MTD] Flex-OneNAND Boundary Configuration
1573
1574 Format: [die0_boundary][,die0_lock][,die1_boundary][,die1_lock]
1575
1576 boundary - index of last SLC block on Flex-OneNAND.
1577 The remaining blocks are configured as MLC blocks.
1578 lock - Configure if Flex-OneNAND boundary should be locked.
1579 Once locked, the boundary cannot be changed.
1580 1 indicates lock status, 0 indicates unlock status.
1581
Ben Dooks9db829f2008-07-03 11:24:29 +01001582 mtdset= [ARM]
1583 ARM/S3C2412 JIVE boot control
1584
1585 See arch/arm/mach-s3c2412/mach-jive.c
1586
Linus Torvalds1da177e2005-04-16 15:20:36 -07001587 mtouchusb.raw_coordinates=
Randy Dunlapa9913042005-10-23 12:57:11 -07001588 [HW] Make the MicroTouch USB driver use raw coordinates
1589 ('y', default) or cooked coordinates ('n')
Linus Torvalds1da177e2005-04-16 15:20:36 -07001590
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001591 mtrr_chunk_size=nn[KMG] [X86]
Matt LaPlante19f59462009-04-27 15:06:31 +02001592 used for mtrr cleanup. It is largest continuous chunk
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001593 that could hold holes aka. UC entries.
1594
1595 mtrr_gran_size=nn[KMG] [X86]
1596 Used for mtrr cleanup. It is granularity of mtrr block.
1597 Default is 1.
1598 Large value could prevent small alignment from
1599 using up MTRRs.
1600
1601 mtrr_spare_reg_nr=n [X86]
1602 Format: <integer>
1603 Range: 0,7 : spare reg number
1604 Default : 1
1605 Used for mtrr cleanup. It is spare mtrr entries number.
1606 Set to 2 or more if your graphical card needs more.
1607
Linus Torvalds1da177e2005-04-16 15:20:36 -07001608 n2= [NET] SDL Inc. RISCom/N2 synchronous serial card
1609
Linus Torvalds1da177e2005-04-16 15:20:36 -07001610 netdev= [NET] Network devices parameters
1611 Format: <irq>,<io>,<mem_start>,<mem_end>,<name>
1612 Note that mem_start is often overloaded to mean
1613 something different and driver-specific.
Randy Dunlapa9913042005-10-23 12:57:11 -07001614 This usage is only documented in each driver source
1615 file if at all.
1616
Krzysztof Piotr Oledzki58401572008-07-21 10:01:34 -07001617 nf_conntrack.acct=
1618 [NETFILTER] Enable connection tracking flow accounting
1619 0 to disable accounting
1620 1 to enable accounting
Tim Gardnerd70a0112010-06-25 14:46:56 +02001621 Default value is 0.
Krzysztof Piotr Oledzki58401572008-07-21 10:01:34 -07001622
Chuck Lever306a0752010-09-17 10:54:37 -04001623 nfsaddrs= [NFS] Deprecated. Use ip= instead.
J. Bruce Fieldsdc7a0812009-10-27 14:41:35 -04001624 See Documentation/filesystems/nfs/nfsroot.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001625
1626 nfsroot= [NFS] nfs root filesystem for disk-less boxes.
J. Bruce Fieldsdc7a0812009-10-27 14:41:35 -04001627 See Documentation/filesystems/nfs/nfsroot.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001628
Chuck Lever306a0752010-09-17 10:54:37 -04001629 nfsrootdebug [NFS] enable nfsroot debugging messages.
1630 See Documentation/filesystems/nfs/nfsroot.txt.
1631
Trond Myklebusta72b4422006-01-03 09:55:41 +01001632 nfs.callback_tcpport=
1633 [NFS] set the TCP port on which the NFSv4 callback
1634 channel should listen.
1635
Trond Myklebuste571cbf2009-08-19 18:12:27 -04001636 nfs.cache_getent=
1637 [NFS] sets the pathname to the program which is used
1638 to update the NFS client cache entries.
1639
1640 nfs.cache_getent_timeout=
1641 [NFS] sets the timeout after which an attempt to
1642 update a cache entry is deemed to have failed.
1643
Trond Myklebust58df0952006-01-03 09:55:57 +01001644 nfs.idmap_cache_timeout=
1645 [NFS] set the maximum lifetime for idmapper cache
1646 entries.
1647
Trond Myklebustf43bf0b2007-10-09 12:01:04 -04001648 nfs.enable_ino64=
1649 [NFS] enable 64-bit inode numbers.
1650 If zero, the NFS client will fake up a 32-bit inode
1651 number for the readdir() and stat() syscalls instead
1652 of returning the full 64-bit number.
1653 The default is to return 64-bit inode numbers.
1654
Trond Myklebustb064eca22011-02-22 15:44:32 -08001655 nfs.nfs4_disable_idmapping=
Trond Myklebust074b1d12012-01-09 13:46:26 -05001656 [NFSv4] When set to the default of '1', this option
1657 ensures that both the RPC level authentication
1658 scheme and the NFS level operations agree to use
1659 numeric uids/gids if the mount is using the
1660 'sec=sys' security flavour. In effect it is
1661 disabling idmapping, which can make migration from
1662 legacy NFSv2/v3 systems to NFSv4 easier.
1663 Servers that do not support this mode of operation
1664 will be autodetected by the client, and it will fall
1665 back to using the idmapper.
1666 To turn off this behaviour, set the value to '0'.
Trond Myklebustb064eca22011-02-22 15:44:32 -08001667
Paul Mundt1e1030d2009-09-01 17:38:32 +09001668 nmi_debug= [KNL,AVR32,SH] Specify one or more actions to take
Haavard Skinnemoene7ba1762007-10-10 14:58:29 +02001669 when a NMI is triggered.
1670 Format: [state][,regs][,debounce][,die]
1671
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05301672 nmi_watchdog= [KNL,BUGS=X86] Debugging features for SMP kernels
Don Zickusfef2c9b2011-03-22 16:34:16 -07001673 Format: [panic,][nopanic,][num]
Don Zickus5dc30552010-11-29 17:07:17 -05001674 Valid num: 0
Cyrill Gorcunov5b9a0e12008-11-01 18:06:51 +03001675 0 - turn nmi_watchdog off
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001676 When panic is specified, panic when an NMI watchdog
Don Zickusfef2c9b2011-03-22 16:34:16 -07001677 timeout occurs (or 'nopanic' to override the opposite
1678 default).
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001679 This is useful when you use a panic=... timeout and
1680 need the box quickly up again.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001681
Anton Vorontsovbff38772009-07-08 11:10:56 -07001682 netpoll.carrier_timeout=
1683 [NET] Specifies amount of time (in seconds) that
1684 netpoll should wait for a carrier. By default netpoll
1685 waits 4 seconds.
1686
Alan Coxcd4f0ef2007-07-31 00:37:59 -07001687 no387 [BUGS=X86-32] Tells the kernel to use the 387 maths
Linus Torvalds1da177e2005-04-16 15:20:36 -07001688 emulation library even if a 387 maths coprocessor
1689 is present.
1690
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001691 no_console_suspend
1692 [HW] Never suspend the console
1693 Disable suspending of consoles during suspend and
1694 hibernate operations. Once disabled, debugging
1695 messages can reach various consoles while the rest
1696 of the system is being put to sleep (ie, while
1697 debugging driver suspend/resume hooks). This may
1698 not work reliably with all consoles, but is known
1699 to work with serial and VGA consoles.
Yanmin Zhang134620f2011-10-31 17:11:27 -07001700 To facilitate more flexible debugging, we also add
1701 console_suspend, a printk module parameter to control
1702 it. Users could use console_suspend (usually
1703 /sys/module/printk/parameters/console_suspend) to
1704 turn on/off it dynamically.
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001705
Christoph Lameterc1aee212007-05-31 00:40:47 -07001706 noaliencache [MM, NUMA, SLAB] Disables the allocation of alien
1707 caches in the slab allocator. Saves per-node memory,
1708 but will impact performance.
Paul Menage3395ee02006-12-06 20:32:16 -08001709
Randy Dunlapa9913042005-10-23 12:57:11 -07001710 noalign [KNL,ARM]
1711
Linus Torvalds1da177e2005-04-16 15:20:36 -07001712 noapic [SMP,APIC] Tells the kernel to not make use of any
1713 IOAPICs that may be present in the system.
1714
Mike Galbraith5091faa2010-11-30 14:18:03 +01001715 noautogroup Disable scheduler automatic task group creation.
1716
Linus Torvalds1da177e2005-04-16 15:20:36 -07001717 nobats [PPC] Do not use BATs for mapping kernel lowmem
1718 on "Classic" PPC cores.
1719
1720 nocache [ARM]
Randy Dunlapa9913042005-10-23 12:57:11 -07001721
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001722 noclflush [BUGS=X86] Don't use the CLFLUSH instruction
1723
Shailabh Nagar163ecdf2006-07-30 03:03:11 -07001724 nodelayacct [KNL] Disable per-task delay accounting
1725
Linus Torvalds1da177e2005-04-16 15:20:36 -07001726 nodisconnect [HW,SCSI,M68K] Disables SCSI disconnects.
1727
Paul Mundt6902aa82008-09-21 17:14:42 +09001728 nodsp [SH] Disable hardware DSP at boot time.
1729
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05301730 noefi [X86] Disable EFI runtime services support.
Huang, Ying8b2cb7a2008-01-30 13:32:11 +01001731
Linus Torvalds1da177e2005-04-16 15:20:36 -07001732 noexec [IA-64]
1733
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05301734 noexec [X86]
Jiri Slabyf5a1b192008-04-12 10:28:25 +02001735 On X86-32 available only on PAE configured kernels.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001736 noexec=on: enable non-executable mappings (default)
Jiri Slabyf5a1b192008-04-12 10:28:25 +02001737 noexec=off: disable non-executable mappings
1738
Fenghua Yude5397a2011-05-11 16:51:05 -07001739 nosmep [X86]
1740 Disable SMEP (Supervisor Mode Execution Protection)
1741 even if it is supported by processor.
1742
Jiri Slabyf5a1b192008-04-12 10:28:25 +02001743 noexec32 [X86-64]
1744 This affects only 32-bit executables.
1745 noexec32=on: enable non-executable mappings (default)
1746 read doesn't imply executable mappings
1747 noexec32=off: disable non-executable mappings
1748 read implies executable mappings
Linus Torvalds1da177e2005-04-16 15:20:36 -07001749
Paul Mundt6902aa82008-09-21 17:14:42 +09001750 nofpu [SH] Disable hardware FPU at boot time.
1751
Alan Coxcd4f0ef2007-07-31 00:37:59 -07001752 nofxsr [BUGS=X86-32] Disables x86 floating point extended
Chuck Ebbert4f886512006-03-23 02:59:34 -08001753 register save and restore. The kernel will only save
1754 legacy floating-point registers on task switch.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001755
Suresh Siddha0c752a92009-05-22 12:17:45 -07001756 noxsave [BUGS=X86] Disables x86 extended register state save
1757 and restore using xsave. The kernel will fallback to
1758 enabling legacy floating-point and sse state.
1759
Paulius Zaleckas01a24d22009-03-31 13:55:44 +01001760 nohlt [BUGS=ARM,SH] Tells the kernel that the sleep(SH) or
1761 wfi(ARM) instruction doesn't work correctly and not to
1762 use it. This is also useful when using JTAG debugger.
Randy Dunlapa9913042005-10-23 12:57:11 -07001763
Alan Coxcd4f0ef2007-07-31 00:37:59 -07001764 no-hlt [BUGS=X86-32] Tells the kernel that the hlt
Linus Torvalds1da177e2005-04-16 15:20:36 -07001765 instruction doesn't work correctly and not to
1766 use it.
1767
Serge E. Hallyn1f29fae2008-11-05 16:08:52 -06001768 no_file_caps Tells the kernel not to honor file capabilities. The
1769 only way then for a file to be executed with privilege
1770 is to be setuid root or executed by root.
1771
Linus Torvalds1da177e2005-04-16 15:20:36 -07001772 nohalt [IA-64] Tells the kernel not to use the power saving
1773 function PAL_HALT_LIGHT when idle. This increases
1774 power-consumption. On the positive side, it reduces
1775 interrupt wake-up latency, which may improve performance
1776 in certain environments such as networked servers or
1777 real-time systems.
1778
Thomas Gleixner79bf2bb2007-02-16 01:28:03 -08001779 nohz= [KNL] Boottime enable/disable dynamic ticks
1780 Valid arguments: on, off
1781 Default: on
1782
Paul Mundteeee7852009-04-02 12:31:16 +09001783 noiotrap [SH] Disables trapped I/O port accesses.
1784
Alan Coxcd4f0ef2007-07-31 00:37:59 -07001785 noirqdebug [X86-32] Disables the code which attempts to detect and
Linus Torvalds1da177e2005-04-16 15:20:36 -07001786 disable unhandled interrupt sources.
1787
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05301788 no_timer_check [X86,APIC] Disables the code which tests for
Zachary Amsden8542b202006-12-07 02:14:09 +01001789 broken timer IRQ sources.
1790
Linus Torvalds1da177e2005-04-16 15:20:36 -07001791 noisapnp [ISAPNP] Disables ISA PnP code.
1792
1793 noinitrd [RAM] Tells the kernel not to load any configured
1794 initial RAM disk.
1795
Weidong Han03ea8152009-04-17 16:42:15 +08001796 nointremap [X86-64, Intel-IOMMU] Do not enable interrupt
1797 remapping.
Chris Wrightd1423d52010-07-20 11:06:49 -07001798 [Deprecated - use intremap=off]
Weidong Han03ea8152009-04-17 16:42:15 +08001799
Linus Torvalds1da177e2005-04-16 15:20:36 -07001800 nointroute [IA-64]
1801
Randy Dunlap16290242011-08-13 12:34:52 -07001802 nojitter [IA-64] Disables jitter checking for ITC timers.
Tony Luck0aa366f2007-07-20 11:22:30 -07001803
Jiri Kosina9cf4c4f2010-08-16 17:51:20 +02001804 no-kvmclock [X86,KVM] Disable paravirtualized KVM clock driver
1805
Gleb Natapovfd10cde2010-10-14 11:22:51 +02001806 no-kvmapf [X86,KVM] Disable paravirtualized asynchronous page
1807 fault handling.
1808
Glauber Costad910f5c2011-07-11 15:28:19 -04001809 no-steal-acc [X86,KVM] Disable paravirtualized steal time accounting.
1810 steal time is computed, but won't influence scheduler
1811 behaviour
1812
Alan Coxcd4f0ef2007-07-31 00:37:59 -07001813 nolapic [X86-32,APIC] Do not enable or use the local APIC.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001814
Alan Coxcd4f0ef2007-07-31 00:37:59 -07001815 nolapic_timer [X86-32,APIC] Do not use the local APIC timer.
Thomas Gleixnerad62ca22007-03-22 00:11:21 -08001816
Linus Torvalds1da177e2005-04-16 15:20:36 -07001817 noltlbs [PPC] Do not use large page/tlb entries for kernel
1818 lowmem mapping on PPC40x.
1819
Horms312f1f02006-02-22 09:57:55 +09001820 nomca [IA-64] Disable machine check abort handling
1821
Alan Coxcd4f0ef2007-07-31 00:37:59 -07001822 nomce [X86-32] Machine Check Exception
Hormsabe37e52006-04-01 01:36:09 +02001823
Andres Salomon83d73842007-10-12 23:04:06 +02001824 nomfgpt [X86-32] Disable Multi-Function General Purpose
1825 Timer usage (for AMD Geode machines).
1826
Don Zickusbda62632011-10-13 15:14:27 -04001827 nonmi_ipi [X86] Disable using NMI IPIs during panic/reboot to
1828 shutdown the other cpus. Instead use the REBOOT_VECTOR
1829 irq.
1830
Jiri Kosina016ddd92010-01-18 17:05:40 +01001831 nopat [X86] Disable PAT (page attribute table extension of
1832 pagetables) support.
1833
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001834 norandmaps Don't use address space randomization. Equivalent to
1835 echo 0 > /proc/sys/kernel/randomize_va_space
1836
Jiri Kosinabbff2162010-08-11 18:34:09 +02001837 noreplace-paravirt [X86,IA-64,PV_OPS] Don't patch paravirt_ops
Jeremy Fitzhardinge959b4fd2007-05-02 19:27:16 +02001838
Alan Coxcd4f0ef2007-07-31 00:37:59 -07001839 noreplace-smp [X86-32,SMP] Don't replace SMP instructions
Jeremy Fitzhardingeb7fb4af2007-05-02 19:27:13 +02001840 with UP alternatives
1841
Linus Torvalds1da177e2005-04-16 15:20:36 -07001842 noresidual [PPC] Don't use residual data on PReP machines.
1843
H. Peter Anvin49d859d2011-07-31 14:02:19 -07001844 nordrand [X86] Disable the direct use of the RDRAND
1845 instruction even if it is supported by the
1846 processor. RDRAND is still available to user
1847 space applications.
1848
Randy Dunlapa9913042005-10-23 12:57:11 -07001849 noresume [SWSUSP] Disables resume and restores original swap
1850 space.
1851
Linus Torvalds1da177e2005-04-16 15:20:36 -07001852 no-scroll [VGA] Disables scrollback.
1853 This is required for the Braillex ib80-piezo Braille
1854 reader made by F.H. Papenmeier (Germany).
1855
1856 nosbagart [IA-64]
1857
Alan Coxcd4f0ef2007-07-31 00:37:59 -07001858 nosep [BUGS=X86-32] Disables x86 SYSENTER/SYSEXIT support.
Chuck Ebbert4f886512006-03-23 02:59:34 -08001859
Len Brown61ec7562007-08-16 03:34:22 -04001860 nosmp [SMP] Tells an SMP kernel to act as a UP kernel,
1861 and disable the IO APIC. legacy for "maxcpus=0".
Linus Torvalds1da177e2005-04-16 15:20:36 -07001862
Dave Jones97842212007-07-15 23:41:05 -07001863 nosoftlockup [KNL] Disable the soft-lockup detector.
1864
Linus Torvalds1da177e2005-04-16 15:20:36 -07001865 nosync [HW,M68K] Disables sync negotiation for all devices.
1866
Alan Coxcd4f0ef2007-07-31 00:37:59 -07001867 notsc [BUGS=X86-32] Disable Time Stamp Counter
Linus Torvalds1da177e2005-04-16 15:20:36 -07001868
1869 nousb [USB] Disable the USB subsystem
1870
Ben Hutchings55142372011-01-02 23:02:42 +00001871 nowatchdog [KNL] Disable the lockup detector (NMI watchdog).
Don Zickus58687ac2010-05-07 17:11:44 -04001872
Linus Torvalds1da177e2005-04-16 15:20:36 -07001873 nowb [ARM]
Randy Dunlapa9913042005-10-23 12:57:11 -07001874
Weidong Han2b2fd872009-04-17 16:42:12 +08001875 nox2apic [X86-64,APIC] Do not enable x2APIC mode.
1876
Randy Dunlap16290242011-08-13 12:34:52 -07001877 nptcg= [IA-64] Override max number of concurrent global TLB
Fenghua Yua6c75b862008-03-14 13:57:08 -07001878 purges which is reported from either PAL_VM_SUMMARY or
1879 SAL PALO.
1880
Yinghai Lu2b633e32010-02-10 01:20:37 -08001881 nr_cpus= [SMP] Maximum number of processors that an SMP kernel
1882 could support. nr_cpus=n : n >= 1 limits the kernel to
1883 supporting 'n' processors. Later in runtime you can not
1884 use hotplug cpu feature to put more cpu back to online.
1885 just like you compile the kernel NR_CPUS=n
1886
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07001887 nr_uarts= [SERIAL] maximum number of UARTs to be registered.
1888
KAMEZAWA Hiroyukif0c0b2b2007-07-15 23:38:01 -07001889 numa_zonelist_order= [KNL, BOOT] Select zonelist order for NUMA.
1890 one of ['zone', 'node', 'default'] can be specified
1891 This can be set from sysctl after boot.
1892 See Documentation/sysctl/vm.txt for details.
1893
Randy Dunlap7c4be2532009-01-06 14:42:44 -08001894 ohci1394_dma=early [HW] enable debugging via the ohci1394 driver.
1895 See Documentation/debugging-via-ohci1394.txt for more
1896 info.
1897
Andres Salomon3ef0e1f2008-04-29 00:59:53 -07001898 olpc_ec_timeout= [OLPC] ms delay when issuing EC commands
1899 Rather than timing out after 20 ms if an EC
1900 command is not properly ACKed, override the length
1901 of the timeout. We have interrupts disabled while
1902 waiting for the ACK, so if this is set too high
1903 interrupts *may* be lost!
1904
Tony Lindgren15ac7af2009-12-11 16:16:32 -08001905 omap_mux= [OMAP] Override bootloader pin multiplexing.
1906 Format: <mux_mode0.mode_name=value>...
1907 For example, to override I2C bus2:
1908 omap_mux=i2c2_scl.i2c2_scl=0x100,i2c2_sda.i2c2_sda=0x100
1909
Linus Torvalds1da177e2005-04-16 15:20:36 -07001910 oprofile.timer= [HW]
1911 Use timer interrupt instead of performance counters
1912
Robert Richter7e4e0bd2009-05-06 12:10:23 +02001913 oprofile.cpu_type= Force an oprofile cpu type
1914 This might be useful if you have an older oprofile
1915 userland or if you want common events.
Robert Richter8d7ff4f2009-06-23 11:48:14 +02001916 Format: { arch_perfmon }
1917 arch_perfmon: [X86] Force use of architectural
Robert Richter7e4e0bd2009-05-06 12:10:23 +02001918 perfmon on Intel CPUs instead of the
1919 CPU specific event set.
Robert Richter159a80b2011-10-11 19:39:16 +02001920 timer: [X86] Force use of architectural NMI
1921 timer mode (see also oprofile.timer
1922 for generic hr timer mode)
Andreas Krebbeldd3c4672011-11-25 20:03:05 +01001923 [s390] Force legacy basic mode sampling
1924 (report cpu_type "timer")
Andi Kleen1dcdb5a2009-04-27 17:44:11 +02001925
Randy Dunlap44a4dcf2011-04-04 15:02:24 -07001926 oops=panic Always panic on oopses. Default is to just kill the
1927 process, but there is a small probability of
1928 deadlocking the machine.
Olaf Heringd404ab02011-03-22 16:34:04 -07001929 This will also cause panics on machine check exceptions.
1930 Useful together with panic=30 to trigger a reboot.
1931
Randy Dunlapbcfde332010-06-07 17:10:38 -07001932 OSS [HW,OSS]
1933 See Documentation/sound/oss/oss-parameters.txt
1934
Randy Dunlap44a4dcf2011-04-04 15:02:24 -07001935 panic= [KNL] Kernel behaviour on panic: delay <timeout>
Hugh Dickins4302fbc2011-07-26 16:08:52 -07001936 timeout > 0: seconds before rebooting
1937 timeout = 0: wait forever
1938 timeout < 0: reboot immediately
Linus Torvalds1da177e2005-04-16 15:20:36 -07001939 Format: <timeout>
1940
1941 parkbd.port= [HW] Parallel port number the keyboard adapter is
1942 connected to, default is 0.
1943 Format: <parport#>
1944 parkbd.mode= [HW] Parallel port keyboard adapter mode of operation,
1945 0 for XT, 1 for AT (default is AT).
Randy Dunlapa9913042005-10-23 12:57:11 -07001946 Format: <mode>
Linus Torvalds1da177e2005-04-16 15:20:36 -07001947
Randy Dunlapa9913042005-10-23 12:57:11 -07001948 parport= [HW,PPT] Specify parallel ports. 0 disables.
1949 Format: { 0 | auto | 0xBBB[,IRQ[,DMA]] }
1950 Use 'auto' to force the driver to use any
1951 IRQ/DMA settings detected (the default is to
1952 ignore detected IRQ/DMA settings because of
1953 possible conflicts). You can specify the base
1954 address, IRQ, and DMA settings; IRQ and DMA
1955 should be numbers, or 'auto' (for using detected
1956 settings on that particular port), or 'nofifo'
1957 (to avoid using a FIFO even if it is detected).
1958 Parallel ports are assigned in the order they
1959 are specified on the command line, starting
1960 with parport0.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001961
Randy Dunlapa9913042005-10-23 12:57:11 -07001962 parport_init_mode= [HW,PPT]
1963 Configure VIA parallel port to operate in
1964 a specific mode. This is necessary on Pegasos
1965 computer where firmware has no options for setting
1966 up parallel port mode and sets it to spp.
1967 Currently this function knows 686a and 8231 chips.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001968 Format: [spp|ps2|epp|ecp|ecpepp]
1969
Andrew Mortondd287792006-03-23 03:00:57 -08001970 pause_on_oops=
1971 Halt all CPUs after the first oops has been printed for
1972 the specified number of seconds. This is to be used if
1973 your oopses keep scrolling off the screen.
1974
Linus Torvalds1da177e2005-04-16 15:20:36 -07001975 pcbit= [HW,ISDN]
1976
1977 pcd. [PARIDE]
1978 See header of drivers/block/paride/pcd.c.
Randy Dunlap31c00fc2008-11-13 21:33:24 +00001979 See also Documentation/blockdev/paride.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001980
Randy Dunlapa9913042005-10-23 12:57:11 -07001981 pci=option[,option...] [PCI] various PCI subsystem options:
Bjorn Helgaas1cc0ca22009-01-14 10:04:36 -07001982 earlydump [X86] dump PCI config space before the kernel
1983 changes anything
Andi Kleenc0115602008-08-22 09:53:39 +02001984 off [X86] don't probe for the PCI bus
Alan Coxcd4f0ef2007-07-31 00:37:59 -07001985 bios [X86-32] force use of PCI BIOS, don't access
Randy Dunlapa9913042005-10-23 12:57:11 -07001986 the hardware directly. Use this if your machine
1987 has a non-standard PCI host bridge.
Alan Coxcd4f0ef2007-07-31 00:37:59 -07001988 nobios [X86-32] disallow use of PCI BIOS, only direct
Randy Dunlapa9913042005-10-23 12:57:11 -07001989 hardware access methods are allowed. Use this
1990 if you experience crashes upon bootup and you
1991 suspect they are caused by the BIOS.
Andi Kleenc0115602008-08-22 09:53:39 +02001992 conf1 [X86] Force use of PCI Configuration
Randy Dunlapa9913042005-10-23 12:57:11 -07001993 Mechanism 1.
Andi Kleenc0115602008-08-22 09:53:39 +02001994 conf2 [X86] Force use of PCI Configuration
Randy Dunlapa9913042005-10-23 12:57:11 -07001995 Mechanism 2.
Randy Dunlap7f785762007-10-05 13:17:58 -07001996 noaer [PCIE] If the PCIEAER kernel config parameter is
1997 enabled, this kernel boot option can be used to
1998 disable the use of PCIE advanced error reporting.
Jeff Garzik32a2eea2007-10-11 16:57:27 -04001999 nodomains [PCI] Disable support for multiple PCI
2000 root domains (aka PCI segments, in ACPI-speak).
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05302001 nommconf [X86] Disable use of MMCONFIG for PCI
Bjorn Helgaas61be6d62006-02-15 15:17:43 -08002002 Configuration
Andreas Herrmann12983072009-06-07 16:15:16 +02002003 check_enable_amd_mmconf [X86] check for and enable
2004 properly configured MMIO access to PCI
2005 config space on AMD family 10h CPU
Matthew Wilcox309e57d2006-03-05 22:33:34 -07002006 nomsi [MSI] If the PCI_MSI kernel config parameter is
2007 enabled, this kernel boot option can be used to
2008 disable the use of MSI interrupts system-wide.
Stefan Assmanna9322f62008-06-11 16:35:14 +02002009 noioapicquirk [APIC] Disable all boot interrupt quirks.
2010 Safety option to keep boot IRQs enabled. This
2011 should never be necessary.
Stefan Assmann91979792008-06-11 16:35:15 +02002012 ioapicreroute [APIC] Enable rerouting of boot IRQs to the
2013 primary IO-APIC for bridges that cannot disable
2014 boot IRQs. This fixes a source of spurious IRQs
2015 when the system masks IRQs.
Stefan Assmann41b9eb22008-07-15 13:48:55 +02002016 noioapicreroute [APIC] Disable workaround that uses the
2017 boot IRQ equivalent of an IRQ that connects to
2018 a chipset where boot IRQs cannot be disabled.
2019 The opposite of ioapicreroute.
Alan Coxcd4f0ef2007-07-31 00:37:59 -07002020 biosirq [X86-32] Use PCI BIOS calls to get the interrupt
Randy Dunlapa9913042005-10-23 12:57:11 -07002021 routing table. These calls are known to be buggy
2022 on several machines and they hang the machine
2023 when used, but on other computers it's the only
2024 way to get the interrupt routing table. Try
2025 this option if the kernel is unable to allocate
2026 IRQs or discover secondary PCI buses on your
2027 motherboard.
Andi Kleenc0115602008-08-22 09:53:39 +02002028 rom [X86] Assign address space to expansion ROMs.
Randy Dunlapa9913042005-10-23 12:57:11 -07002029 Use with caution as certain devices share
2030 address decoders between ROMs and other
2031 resources.
Andi Kleenc0115602008-08-22 09:53:39 +02002032 norom [X86] Do not assign address space to
Gary Hadebb71ad82008-05-12 13:57:46 -07002033 expansion ROMs that do not already have
2034 BIOS assigned address ranges.
Mike Habeck7bd1c362010-05-12 11:14:32 -07002035 nobar [X86] Do not assign address space to the
2036 BARs that weren't assigned by the BIOS.
Andi Kleenc0115602008-08-22 09:53:39 +02002037 irqmask=0xMMMM [X86] Set a bit mask of IRQs allowed to be
Randy Dunlapa9913042005-10-23 12:57:11 -07002038 assigned automatically to PCI devices. You can
2039 make the kernel exclude IRQs of your ISA cards
2040 this way.
Andi Kleenc0115602008-08-22 09:53:39 +02002041 pirqaddr=0xAAAAA [X86] Specify the physical address
Randy Dunlapa9913042005-10-23 12:57:11 -07002042 of the PIRQ table (normally generated
2043 by the BIOS) if it is outside the
2044 F0000h-100000h range.
Andi Kleenc0115602008-08-22 09:53:39 +02002045 lastbus=N [X86] Scan all buses thru bus #N. Can be
Randy Dunlapa9913042005-10-23 12:57:11 -07002046 useful if the kernel is unable to find your
2047 secondary buses and you want to tell it
2048 explicitly which ones they are.
Andi Kleenc0115602008-08-22 09:53:39 +02002049 assign-busses [X86] Always assign all PCI bus
Randy Dunlapa9913042005-10-23 12:57:11 -07002050 numbers ourselves, overriding
2051 whatever the firmware may have done.
Andi Kleenc0115602008-08-22 09:53:39 +02002052 usepirqmask [X86] Honor the possible IRQ mask stored
Randy Dunlapa9913042005-10-23 12:57:11 -07002053 in the BIOS $PIR table. This is needed on
2054 some systems with broken BIOSes, notably
2055 some HP Pavilion N5400 and Omnibook XE3
2056 notebooks. This will have no effect if ACPI
2057 IRQ routing is enabled.
Andi Kleenc0115602008-08-22 09:53:39 +02002058 noacpi [X86] Do not use ACPI for IRQ routing
Randy Dunlapa9913042005-10-23 12:57:11 -07002059 or for PCI scanning.
Bjorn Helgaas7bc5e3f2010-02-23 10:24:41 -07002060 use_crs [X86] Use PCI host bridge window information
2061 from ACPI. On BIOSes from 2008 or later, this
2062 is enabled by default. If you need to use this,
2063 please report a bug.
2064 nocrs [X86] Ignore PCI host bridge windows from ACPI.
2065 If you need to use this, please report a bug.
Randy Dunlapa9913042005-10-23 12:57:11 -07002066 routeirq Do IRQ routing for all PCI devices.
2067 This is normally done in pci_enable_device(),
2068 so this option is a temporary workaround
2069 for broken drivers that don't call it.
Yinghai Lu13a6ddb2008-03-27 01:31:18 -07002070 skip_isa_align [X86] do not align io start addr, so can
2071 handle more pci cards
Randy Dunlapa9913042005-10-23 12:57:11 -07002072 firmware [ARM] Do not re-enumerate the bus but instead
2073 just use the configuration from the
2074 bootloader. This is currently used on
2075 IXP2000 systems where the bus has to be
2076 configured a certain way for adjunct CPUs.
Andi Kleen0637a702006-09-26 10:52:41 +02002077 noearly [X86] Don't do any early type 1 scanning.
2078 This might help on some broken boards which
2079 machine check when some devices' config space
2080 is read. But various workarounds are disabled
2081 and some IOMMU drivers will not work.
Matt Domsch6b4b78f2006-09-29 15:23:23 -05002082 bfsort Sort PCI devices into breadth-first order.
2083 This sorting is done to get a device
2084 order compatible with older (<= 2.4) kernels.
2085 nobfsort Don't sort PCI devices into breadth-first order.
Atsushi Nemoto4516a612007-02-05 16:36:06 -08002086 cbiosize=nn[KMG] The fixed amount of bus space which is
2087 reserved for the CardBus bridge's IO window.
2088 The default value is 256 bytes.
2089 cbmemsize=nn[KMG] The fixed amount of bus space which is
2090 reserved for the CardBus bridge's memory
2091 window. The default value is 64 megabytes.
Yuji Shimada32a9a6822009-03-16 17:13:39 +09002092 resource_alignment=
2093 Format:
2094 [<order of align>@][<domain>:]<bus>:<slot>.<func>[; ...]
2095 Specifies alignment and device to reassign
2096 aligned memory resources.
2097 If <order of align> is not specified,
2098 PAGE_SIZE is used as alignment.
2099 PCI-PCI bridge can be specified, if resource
2100 windows need to be expanded.
Andrew Patterson43c16402009-04-22 16:52:09 -06002101 ecrc= Enable/disable PCIe ECRC (transaction layer
2102 end-to-end CRC checking).
2103 bios: Use BIOS/firmware settings. This is the
2104 the default.
2105 off: Turn ECRC off
2106 on: Turn ECRC on.
Ram Paif483d392011-07-07 11:19:10 -07002107 realloc reallocate PCI resources if allocations done by BIOS
2108 are erroneous.
Matt Domsch6b4b78f2006-09-29 15:23:23 -05002109
Chuck Ebberte5665a42008-09-24 20:40:34 -04002110 pcie_aspm= [PCIE] Forcibly enable or disable PCIe Active State Power
2111 Management.
2112 off Disable ASPM.
2113 force Enable ASPM even on devices that claim not to support it.
2114 WARNING: Forcing ASPM on may cause system lockups.
2115
Rafael J. Wysocki79dd9182010-08-21 01:51:44 +02002116 pcie_ports= [PCIE] PCIe ports handling:
Rafael J. Wysocki28eb5f22010-08-21 22:02:38 +02002117 auto Ask the BIOS whether or not to use native PCIe services
2118 associated with PCIe ports (PME, hot-plug, AER). Use
2119 them only if that is allowed by the BIOS.
2120 native Use native PCIe services associated with PCIe ports
2121 unconditionally.
Rafael J. Wysocki79dd9182010-08-21 01:51:44 +02002122 compat Treat PCIe ports as PCI-to-PCI bridges, disable the PCIe
2123 ports driver.
2124
Rafael J. Wysockic7f48652010-02-17 23:39:08 +01002125 pcie_pme= [PCIE,PM] Native PCIe PME signaling options:
Rafael J. Wysockic39fae12010-02-17 23:40:07 +01002126 nomsi Do not use MSI for native PCIe PME signaling (this makes
Rafael J. Wysocki28eb5f22010-08-21 22:02:38 +02002127 all PCIe root ports use INTx for all services).
Rafael J. Wysockic7f48652010-02-17 23:39:08 +01002128
Linus Torvalds1da177e2005-04-16 15:20:36 -07002129 pcmv= [HW,PCMCIA] BadgePAD 4
2130
2131 pd. [PARIDE]
Randy Dunlap31c00fc2008-11-13 21:33:24 +00002132 See Documentation/blockdev/paride.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002133
2134 pdcchassis= [PARISC,HW] Disable/Enable PDC Chassis Status codes at
2135 boot time.
2136 Format: { 0 | 1 }
2137 See arch/parisc/kernel/pdc_chassis.c
2138
Tejun Heof58dc012009-08-14 15:00:50 +09002139 percpu_alloc= Select which percpu first chunk allocator to use.
Tejun Heoe933a732009-08-14 15:00:53 +09002140 Currently supported values are "embed" and "page".
2141 Archs may support subset or none of the selections.
2142 See comments in mm/percpu.c for details on each
2143 allocator. This parameter is primarily for debugging
2144 and performance comparison.
Tejun Heofa8a7092009-06-22 11:56:24 +09002145
Linus Torvalds1da177e2005-04-16 15:20:36 -07002146 pf. [PARIDE]
Randy Dunlap31c00fc2008-11-13 21:33:24 +00002147 See Documentation/blockdev/paride.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002148
2149 pg. [PARIDE]
Randy Dunlap31c00fc2008-11-13 21:33:24 +00002150 See Documentation/blockdev/paride.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002151
2152 pirq= [SMP,APIC] Manual mp-table setup
Uwe Hermann71cced62008-10-20 09:32:21 -07002153 See Documentation/x86/i386/IO-APIC.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002154
2155 plip= [PPT,NET] Parallel port network link
2156 Format: { parport<nr> | timid | 0 }
2157 See also Documentation/parport.txt.
2158
Randy Dunlap16290242011-08-13 12:34:52 -07002159 pmtmr= [X86] Manual setup of pmtmr I/O Port.
Thomas Gleixnerde32a242008-07-12 05:33:30 +02002160 Override pmtimer IOPort with a hex value.
2161 e.g. pmtmr=0x508
2162
Bjorn Helgaas96242112011-08-11 12:14:05 -06002163 pnp.debug=1 [PNP]
2164 Enable PNP debug messages (depends on the
2165 CONFIG_PNP_DEBUG_MESSAGES option). Change at run-time
2166 via /sys/module/pnp/parameters/debug. We always show
2167 current resource usage; turning this on also shows
2168 possible settings and some assignment information.
Bjorn Helgaas97ef0622008-08-19 16:53:41 -06002169
Linus Torvalds1da177e2005-04-16 15:20:36 -07002170 pnpacpi= [ACPI]
2171 { off }
2172
2173 pnpbios= [ISAPNP]
2174 { on | off | curr | res | no-curr | no-res }
2175
2176 pnp_reserve_irq=
2177 [ISAPNP] Exclude IRQs for the autoconfiguration
2178
2179 pnp_reserve_dma=
2180 [ISAPNP] Exclude DMAs for the autoconfiguration
2181
2182 pnp_reserve_io= [ISAPNP] Exclude I/O ports for the autoconfiguration
Randy Dunlapa9913042005-10-23 12:57:11 -07002183 Ranges are in pairs (I/O port base and size).
Linus Torvalds1da177e2005-04-16 15:20:36 -07002184
2185 pnp_reserve_mem=
Randy Dunlapa9913042005-10-23 12:57:11 -07002186 [ISAPNP] Exclude memory regions for the
2187 autoconfiguration.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002188 Ranges are in pairs (memory base and size).
2189
Randy Dunlap4af94f32009-04-17 18:30:28 -07002190 ports= [IP_VS_FTP] IPVS ftp helper module
2191 Default is 21.
2192 Up to 8 (IP_VS_APP_MAX_PORTS) ports
2193 may be specified.
2194 Format: <port>,<port>....
2195
Ingo Molnar45807a12007-07-15 23:40:10 -07002196 print-fatal-signals=
2197 [KNL] debug: print fatal signals
Naohiro Ooiwaf84d49b2009-11-09 00:46:42 +09002198
2199 If enabled, warn about various signal handling
2200 related application anomalies: too many signals,
2201 too many POSIX.1 timers, fatal signals causing a
2202 coredump - etc.
2203
2204 If you hit the warning due to signal overflow,
2205 you might want to try "ulimit -i unlimited".
2206
Ingo Molnar45807a12007-07-15 23:40:10 -07002207 default: off.
2208
Randy Dunlape84845c2007-07-15 23:40:25 -07002209 printk.time= Show timing data prefixed to each printk message line
2210 Format: <bool> (1/Y/y=enable, 0/N/n=disable)
2211
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07002212 processor.max_cstate= [HW,ACPI]
2213 Limit processor to maximum C-state
2214 max_cstate=9 overrides any DMI blacklist limit.
2215
2216 processor.nocst [HW,ACPI]
2217 Ignore the _CST method to determine C-states,
2218 instead using the legacy FADT method
2219
Linus Torvalds1da177e2005-04-16 15:20:36 -07002220 profile= [KNL] Enable kernel profiling via /proc/profile
Randy Dunlapa9913042005-10-23 12:57:11 -07002221 Format: [schedule,]<number>
2222 Param: "schedule" - profile schedule points.
2223 Param: <number> - step/bucket size as a power of 2 for
2224 statistical time based profiling.
Mel Gormanb3da2a72007-10-24 18:23:50 +02002225 Param: "sleep" - profile D-state sleeping (millisecs).
2226 Requires CONFIG_SCHEDSTATS
Dave Jonesc0fe2e62007-10-20 03:08:22 +02002227 Param: "kvm" - profile VM exits.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002228
Linus Torvalds1da177e2005-04-16 15:20:36 -07002229 prompt_ramdisk= [RAM] List of RAM disks to prompt for floppy disk
2230 before loading.
Randy Dunlap31c00fc2008-11-13 21:33:24 +00002231 See Documentation/blockdev/ramdisk.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002232
Randy Dunlapa9913042005-10-23 12:57:11 -07002233 psmouse.proto= [HW,MOUSE] Highest PS2 mouse protocol extension to
2234 probe for; one of (bare|imps|exps|lifebook|any).
Linus Torvalds1da177e2005-04-16 15:20:36 -07002235 psmouse.rate= [HW,MOUSE] Set desired mouse report rate, in reports
2236 per second.
Randy Dunlapa9913042005-10-23 12:57:11 -07002237 psmouse.resetafter= [HW,MOUSE]
2238 Try to reset the device after so many bad packets
Linus Torvalds1da177e2005-04-16 15:20:36 -07002239 (0 = never).
2240 psmouse.resolution=
2241 [HW,MOUSE] Set desired mouse resolution, in dpi.
2242 psmouse.smartscroll=
Randy Dunlapa9913042005-10-23 12:57:11 -07002243 [HW,MOUSE] Controls Logitech smartscroll autorepeat.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002244 0 = disabled, 1 = enabled (default).
2245
Matthew Garrettdee28e72011-07-21 16:57:55 -04002246 pstore.backend= Specify the name of the pstore backend to use
2247
Linus Torvalds1da177e2005-04-16 15:20:36 -07002248 pt. [PARIDE]
Randy Dunlap31c00fc2008-11-13 21:33:24 +00002249 See Documentation/blockdev/paride.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002250
Kay Sieversdc8c8582007-08-15 12:25:38 +02002251 pty.legacy_count=
2252 [KNL] Number of legacy pty's. Overwrites compiled-in
2253 default number.
2254
Randy Dunlap7d2c5022006-09-29 02:01:02 -07002255 quiet [KNL] Disable most log messages
Randy Dunlapa9913042005-10-23 12:57:11 -07002256
Linus Torvalds1da177e2005-04-16 15:20:36 -07002257 r128= [HW,DRM]
2258
2259 raid= [HW,RAID]
2260 See Documentation/md.txt.
2261
Randy Dunlapa9913042005-10-23 12:57:11 -07002262 ramdisk_blocksize= [RAM]
Randy Dunlap31c00fc2008-11-13 21:33:24 +00002263 See Documentation/blockdev/ramdisk.txt.
Randy Dunlapa9913042005-10-23 12:57:11 -07002264
Linus Torvalds1da177e2005-04-16 15:20:36 -07002265 ramdisk_size= [RAM] Sizes of RAM disks in kilobytes
Randy Dunlap31c00fc2008-11-13 21:33:24 +00002266 See Documentation/blockdev/ramdisk.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002267
Robert P. J. Day24aaef82008-02-03 15:20:26 +02002268 rcupdate.blimit= [KNL,BOOT]
2269 Set maximum number of finished RCU callbacks to process
2270 in one batch.
Dipankar Sarma21a1ea92006-03-07 21:55:33 -08002271
Robert P. J. Day24aaef82008-02-03 15:20:26 +02002272 rcupdate.qhimark= [KNL,BOOT]
2273 Set threshold of queued
Dipankar Sarma21a1ea92006-03-07 21:55:33 -08002274 RCU callbacks over which batch limiting is disabled.
2275
Robert P. J. Day24aaef82008-02-03 15:20:26 +02002276 rcupdate.qlowmark= [KNL,BOOT]
2277 Set threshold of queued RCU callbacks below which
2278 batch limiting is re-enabled.
Dipankar Sarma21a1ea92006-03-07 21:55:33 -08002279
Olof Johanssonffdfc402005-09-06 15:17:19 -07002280 rdinit= [KNL]
2281 Format: <full_path>
2282 Run specified binary instead of /init from the ramdisk,
2283 used for early userspace startup. See initrd.
2284
Alan Coxcd4f0ef2007-07-31 00:37:59 -07002285 reboot= [BUGS=X86-32,BUGS=ARM,BUGS=IA-64] Rebooting mode
Linus Torvalds1da177e2005-04-16 15:20:36 -07002286 Format: <reboot_mode>[,<reboot_mode2>[,...]]
Randy Dunlapecb08d82009-01-06 14:42:44 -08002287 See arch/*/kernel/reboot.c or arch/*/kernel/process.c
Linus Torvalds1da177e2005-04-16 15:20:36 -07002288
Paul Jackson46b6d942008-07-04 10:00:09 -07002289 relax_domain_level=
2290 [KNL, SMP] Set scheduler's default relax_domain_level.
Thadeu Lima de Souza Cascardo21acb9c2009-02-04 10:12:08 +01002291 See Documentation/cgroups/cpusets.txt.
Paul Jackson46b6d942008-07-04 10:00:09 -07002292
Linus Torvalds1da177e2005-04-16 15:20:36 -07002293 reserve= [KNL,BUGS] Force the kernel to ignore some iomem area
2294
Alan Coxcd4f0ef2007-07-31 00:37:59 -07002295 reservetop= [X86-32]
Zachary Amsden461a9af2006-09-25 23:32:25 -07002296 Format: nn[KMG]
2297 Reserves a hole at the top of the kernel virtual
2298 address space.
2299
H. Peter Anvin9ea77bd2010-08-25 16:38:20 -07002300 reservelow= [X86]
2301 Format: nn[K]
2302 Set the amount of memory to reserve for BIOS at
2303 the bottom of the address space.
2304
Vivek Goyal7e962872006-09-27 01:50:44 -07002305 reset_devices [KNL] Force drivers to reset the underlying device
2306 during initialization.
2307
Randy Dunlapa9913042005-10-23 12:57:11 -07002308 resume= [SWSUSP]
2309 Specify the partition device for software suspend
Linus Torvalds1da177e2005-04-16 15:20:36 -07002310
Rafael J. Wysockiecbd0da2006-12-06 20:34:13 -08002311 resume_offset= [SWSUSP]
2312 Specify the offset from the beginning of the partition
2313 given by "resume=" at which the swap header is located,
2314 in <PAGE_SIZE> units (needed only for swap files).
2315 See Documentation/power/swsusp-and-swap-files.txt
2316
Barry Songf126f732011-10-10 23:38:41 +02002317 resumedelay= [HIBERNATION] Delay (in seconds) to pause before attempting to
2318 read the resume files
2319
Barry Song6f8d7022011-10-06 20:34:46 +02002320 resumewait [HIBERNATION] Wait (indefinitely) for resume device to show up.
2321 Useful for devices that are detected asynchronously
2322 (e.g. USB and MMC devices).
2323
Bojan Smojverf996fc92010-09-09 23:06:23 +02002324 hibernate= [HIBERNATION]
2325 noresume Don't check if there's a hibernation image
2326 present during boot.
2327 nocompress Don't compress/decompress hibernation images.
2328
Michael Neuling0a7b35cb2007-02-10 01:44:33 -08002329 retain_initrd [RAM] Keep initrd memory after extraction
2330
Linus Torvalds1da177e2005-04-16 15:20:36 -07002331 rhash_entries= [KNL,NET]
2332 Set number of hash buckets for route cache
2333
2334 riscom8= [HW,SERIAL]
2335 Format: <io_board1>[,<io_board2>[,...<io_boardN>]]
2336
2337 ro [KNL] Mount root device read-only on boot
2338
2339 root= [KNL] Root filesystem
Will Drewryf2d34fd2011-08-03 16:21:08 -07002340 See name_to_dev_t comment in init/do_mounts.c.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002341
2342 rootdelay= [KNL] Delay (in seconds) to pause before attempting to
2343 mount the root filesystem
2344
2345 rootflags= [KNL] Set root filesystem mount option string
2346
2347 rootfstype= [KNL] Set root filesystem type
2348
Pierre Ossmancc1ed752007-07-15 23:40:35 -07002349 rootwait [KNL] Wait (indefinitely) for root device to show up.
2350 Useful for devices that are detected asynchronously
2351 (e.g. USB and MMC devices).
2352
Linus Torvalds1da177e2005-04-16 15:20:36 -07002353 rw [KNL] Mount root device read-write on boot
2354
2355 S [KNL] Run init in single mode
2356
2357 sa1100ir [NET]
2358 See drivers/net/irda/sa1100_ir.c.
2359
Linus Torvalds1da177e2005-04-16 15:20:36 -07002360 sbni= [NET] Granch SBNI12 leased line adapter
Randy Dunlapa9913042005-10-23 12:57:11 -07002361
Mike Travisf6630112009-11-17 18:22:15 -06002362 sched_debug [KNL] Enables verbose scheduler debug messages.
2363
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07002364 security= [SECURITY] Choose a security module to enable at boot.
2365 If this boot parameter is not specified, only the first
2366 security module asking for security registration will be
2367 loaded. An invalid security module name will be treated
2368 as if no module has been chosen.
2369
2370 selinux= [SELINUX] Disable or enable SELinux at boot time.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002371 Format: { "0" | "1" }
2372 See security/selinux/Kconfig help text.
2373 0 -- disable.
2374 1 -- enable.
2375 Default value is set via kernel config option.
2376 If enabled at boot time, /selinux/disable can be used
2377 later to disable prior to initial policy load.
2378
John Johansenc1c124e2010-07-29 14:48:09 -07002379 apparmor= [APPARMOR] Disable or enable AppArmor at boot time
2380 Format: { "0" | "1" }
2381 See security/apparmor/Kconfig help text
2382 0 -- disable.
2383 1 -- enable.
2384 Default value is set via kernel config option.
2385
Alan Coxcd4f0ef2007-07-31 00:37:59 -07002386 serialnumber [BUGS=X86-32]
Linus Torvalds1da177e2005-04-16 15:20:36 -07002387
Linus Torvalds1da177e2005-04-16 15:20:36 -07002388 shapers= [NET]
2389 Maximal number of shapers.
Randy Dunlapa9913042005-10-23 12:57:11 -07002390
Yinghai Lub05f78f2008-08-22 01:32:50 -07002391 show_msr= [x86] show boot-time MSR settings
2392 Format: { <integer> }
2393 Show boot-time (BIOS-initialized) MSR settings.
2394 The parameter means the number of CPUs to show,
2395 for example 1 means boot CPU only.
2396
Linus Torvalds1da177e2005-04-16 15:20:36 -07002397 simeth= [IA-64]
2398 simscsi=
Randy Dunlapa9913042005-10-23 12:57:11 -07002399
Linus Torvalds1da177e2005-04-16 15:20:36 -07002400 slram= [HW,MTD]
2401
David Rientjes3df1ccc2011-10-18 22:09:28 -07002402 slab_max_order= [MM, SLAB]
2403 Determines the maximum allowed order for slabs.
2404 A high setting may cause OOMs due to memory
2405 fragmentation. Defaults to 1 for systems with
2406 more than 32MB of RAM, 0 otherwise.
2407
Christoph Lameterf0630ff2007-07-15 23:38:14 -07002408 slub_debug[=options[,slabs]] [MM, SLUB]
2409 Enabling slub_debug allows one to determine the
2410 culprit if slab objects become corrupted. Enabling
2411 slub_debug can create guard zones around objects and
2412 may poison objects when not in use. Also tracks the
2413 last alloc / free. For more information see
2414 Documentation/vm/slub.txt.
Christoph Lameterc1aee212007-05-31 00:40:47 -07002415
2416 slub_max_order= [MM, SLUB]
Christoph Lameterf0630ff2007-07-15 23:38:14 -07002417 Determines the maximum allowed order for slabs.
2418 A high setting may cause OOMs due to memory
2419 fragmentation. For more information see
2420 Documentation/vm/slub.txt.
Christoph Lameterc1aee212007-05-31 00:40:47 -07002421
2422 slub_min_objects= [MM, SLUB]
Christoph Lameterf0630ff2007-07-15 23:38:14 -07002423 The minimum number of objects per slab. SLUB will
2424 increase the slab order up to slub_max_order to
2425 generate a sufficiently large slab able to contain
2426 the number of objects indicated. The higher the number
2427 of objects the smaller the overhead of tracking slabs
2428 and the less frequently locks need to be acquired.
Christoph Lameterc1aee212007-05-31 00:40:47 -07002429 For more information see Documentation/vm/slub.txt.
2430
2431 slub_min_order= [MM, SLUB]
2432 Determines the mininum page order for slabs. Must be
Christoph Lameterf0630ff2007-07-15 23:38:14 -07002433 lower than slub_max_order.
Christoph Lameterc1aee212007-05-31 00:40:47 -07002434 For more information see Documentation/vm/slub.txt.
2435
2436 slub_nomerge [MM, SLUB]
Christoph Lameterf0630ff2007-07-15 23:38:14 -07002437 Disable merging of slabs with similar size. May be
Christoph Lameterc1aee212007-05-31 00:40:47 -07002438 necessary if there is some reason to distinguish
Christoph Lameterf0630ff2007-07-15 23:38:14 -07002439 allocs to different slabs. Debug options disable
2440 merging on their own.
Christoph Lameterc1aee212007-05-31 00:40:47 -07002441 For more information see Documentation/vm/slub.txt.
2442
Linus Torvalds1da177e2005-04-16 15:20:36 -07002443 smart2= [HW]
2444 Format: <io1>[,<io2>[,...,<io8>]]
2445
Alan Coxcd4f0ef2007-07-31 00:37:59 -07002446 smp-alt-once [X86-32,SMP] On a hotplug CPU system, only
Jeremy Fitzhardingeb7fb4af2007-05-02 19:27:13 +02002447 attempt to substitute SMP alternatives once at boot.
2448
Bjorn Helgaasd0d4f692007-05-08 00:36:05 -07002449 smsc-ircc2.nopnp [HW] Don't use PNP to discover SMC devices
2450 smsc-ircc2.ircc_cfg= [HW] Device configuration I/O port
2451 smsc-ircc2.ircc_sir= [HW] SIR base I/O port
2452 smsc-ircc2.ircc_fir= [HW] FIR base I/O port
2453 smsc-ircc2.ircc_irq= [HW] IRQ line
2454 smsc-ircc2.ircc_dma= [HW] DMA channel
2455 smsc-ircc2.ircc_transceiver= [HW] Transceiver type:
2456 0: Toshiba Satellite 1800 (GP data pin select)
2457 1: Fast pin select (default)
2458 2: ATC IRMode
2459
Ingo Molnar9c44bc02008-05-12 21:21:04 +02002460 softlockup_panic=
2461 [KNL] Should the soft-lockup detector generate panics.
Randy Dunlap44a4dcf2011-04-04 15:02:24 -07002462 Format: <integer>
Ingo Molnar9c44bc02008-05-12 21:21:04 +02002463
Linus Torvalds1da177e2005-04-16 15:20:36 -07002464 sonypi.*= [HW] Sony Programmable I/O Control Device driver
Paul Bolle395cf962011-08-15 02:02:26 +02002465 See Documentation/laptops/sonypi.txt
Linus Torvalds1da177e2005-04-16 15:20:36 -07002466
2467 specialix= [HW,SERIAL] Specialix multi-serial port adapter
Randy Dunlap31c00fc2008-11-13 21:33:24 +00002468 See Documentation/serial/specialix.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002469
2470 spia_io_base= [HW,MTD]
2471 spia_fio_base=
2472 spia_pedr=
2473 spia_peddr=
2474
Steven Rostedtf38f1d22008-12-16 23:06:40 -05002475 stacktrace [FTRACE]
2476 Enabled the stack tracer on boot up.
2477
Linus Torvalds1da177e2005-04-16 15:20:36 -07002478 sti= [PARISC,HW]
2479 Format: <num>
2480 Set the STI (builtin display/keyboard on the HP-PARISC
2481 machines) console (graphic card) which should be used
2482 as the initial boot-console.
2483 See also comment in drivers/video/console/sticore.c.
2484
2485 sti_font= [HW]
2486 See comment in drivers/video/console/sticore.c.
2487
2488 stifb= [HW]
2489 Format: bpp:<bpp1>[:<bpp2>[:<bpp3>...]]
2490
Trond Myklebustcbf11072009-08-09 15:06:19 -04002491 sunrpc.min_resvport=
2492 sunrpc.max_resvport=
2493 [NFS,SUNRPC]
2494 SunRPC servers often require that client requests
2495 originate from a privileged port (i.e. a port in the
2496 range 0 < portnr < 1024).
2497 An administrator who wishes to reserve some of these
2498 ports for other uses may adjust the range that the
2499 kernel's sunrpc client considers to be privileged
2500 using these two parameters to set the minimum and
2501 maximum port values.
2502
Greg Banks42a7fc42007-03-06 01:42:23 -08002503 sunrpc.pool_mode=
2504 [NFS]
2505 Control how the NFS server code allocates CPUs to
2506 service thread pools. Depending on how many NICs
2507 you have and where their interrupts are bound, this
2508 option will affect which CPUs will do NFS serving.
2509 Note: this parameter cannot be changed while the
2510 NFS server is running.
2511
2512 auto the server chooses an appropriate mode
2513 automatically using heuristics
2514 global a single global pool contains all CPUs
2515 percpu one pool for each CPU
2516 pernode one pool for each NUMA node (equivalent
2517 to global on non-NUMA machines)
2518
Trond Myklebustcbf11072009-08-09 15:06:19 -04002519 sunrpc.tcp_slot_table_entries=
2520 sunrpc.udp_slot_table_entries=
2521 [NFS,SUNRPC]
2522 Sets the upper limit on the number of simultaneous
2523 RPC calls that can be sent from the client to a
2524 server. Increasing these values may allow you to
2525 improve throughput, but will also increase the
2526 amount of memory reserved for use by the client.
2527
Michal Hockoa42c3902010-11-24 12:57:08 -08002528 swapaccount[=0|1]
2529 [KNL] Enable accounting of swap in memory resource
2530 controller if no parameter or 1 is given or disable
2531 it if 0 is given (See Documentation/cgroups/memory.txt)
2532
Linus Torvalds1da177e2005-04-16 15:20:36 -07002533 swiotlb= [IA-64] Number of I/O TLB slabs
Randy Dunlapa9913042005-10-23 12:57:11 -07002534
Linus Torvalds1da177e2005-04-16 15:20:36 -07002535 switches= [HW,M68k]
2536
Andi Kleene52eec12010-09-08 16:54:17 +02002537 sysfs.deprecated=0|1 [KNL]
2538 Enable/disable old style sysfs layout for old udev
2539 on older distributions. When this option is enabled
2540 very new udev will not work anymore. When this option
2541 is disabled (or CONFIG_SYSFS_DEPRECATED not compiled)
2542 in older udev will not work anymore.
2543 Default depends on CONFIG_SYSFS_DEPRECATED_V2 set in
2544 the kernel configuration.
2545
Ingo Molnar5d6f6472006-12-13 00:34:36 -08002546 sysrq_always_enabled
2547 [KNL]
2548 Ignore sysrq setting - this boot parameter will
2549 neutralize any effect of /proc/sys/kernel/sysrq.
2550 Useful for debugging.
2551
Linus Torvalds1da177e2005-04-16 15:20:36 -07002552 tdfx= [HW,DRM]
2553
David Brownell77437fd2008-07-23 21:28:33 -07002554 test_suspend= [SUSPEND]
2555 Specify "mem" (for Suspend-to-RAM) or "standby" (for
2556 standby suspend) as the system sleep state to briefly
2557 enter during system startup. The system is woken from
2558 this state using a wakeup-capable RTC alarm.
2559
Linus Torvalds1da177e2005-04-16 15:20:36 -07002560 thash_entries= [KNL,NET]
2561 Set number of hash buckets for TCP connection
2562
Len Brownf8707ec2007-08-12 00:12:54 -04002563 thermal.act= [HW,ACPI]
2564 -1: disable all active trip points in all thermal zones
2565 <degrees C>: override all lowest active trip points
2566
Len Brownc52a7412007-08-14 15:49:32 -04002567 thermal.crt= [HW,ACPI]
2568 -1: disable all critical trip points in all thermal zones
Zhang Rui22a94d72008-10-17 02:41:20 -04002569 <degrees C>: override all critical trip points
Len Brownc52a7412007-08-14 15:49:32 -04002570
Len Brownf5487142007-08-12 00:12:44 -04002571 thermal.nocrt= [HW,ACPI]
2572 Set to disable actions on ACPI thermal zone
2573 critical and hot trip points.
2574
Len Brown72b33ef2007-08-12 00:12:17 -04002575 thermal.off= [HW,ACPI]
2576 1: disable ACPI thermal control
2577
Len Browna70cdc52007-08-12 00:12:35 -04002578 thermal.psv= [HW,ACPI]
2579 -1: disable all passive trip points
Randy Dunlapada9cfd2008-12-19 10:57:32 -08002580 <degrees C>: override all passive trip points to this
2581 value
Len Browna70cdc52007-08-12 00:12:35 -04002582
Len Brown730ff342007-08-12 00:12:26 -04002583 thermal.tzp= [HW,ACPI]
2584 Specify global default ACPI thermal zone polling rate
2585 <deci-seconds>: poll all this frequency
2586 0: no polling (default)
2587
Thomas Gleixner8d32a302011-02-23 23:52:23 +00002588 threadirqs [KNL]
2589 Force threading of all interrupt handlers except those
2590 marked explicitely IRQF_NO_THREAD.
2591
Heiko Carstens2b1a61f2008-12-25 13:39:23 +01002592 topology= [S390]
2593 Format: {off | on}
2594 Specify if the kernel should make use of the cpu
Sylvestre Ledruf65e51d2011-04-04 15:04:46 -07002595 topology information if the hardware supports this.
2596 The scheduler will make use of this information and
Heiko Carstens2b1a61f2008-12-25 13:39:23 +01002597 e.g. base its process migration decisions on it.
Heiko Carstensc9af3fa2010-10-25 16:10:43 +02002598 Default is on.
Heiko Carstens2b1a61f2008-12-25 13:39:23 +01002599
Linus Torvalds1da177e2005-04-16 15:20:36 -07002600 tp720= [HW,PS2]
2601
Rajiv Andrade225a9be2010-03-25 00:55:32 -03002602 tpm_suspend_pcr=[HW,TPM]
2603 Format: integer pcr id
2604 Specify that at suspend time, the tpm driver
2605 should extend the specified pcr with zeros,
2606 as a workaround for some chips which fail to
2607 flush the last written pcr on TPM_SaveState.
2608 This will guarantee that all the other pcrs
2609 are saved.
2610
Li Zefan9d612be2009-06-24 17:33:15 +08002611 trace_buf_size=nn[KMG]
2612 [FTRACE] will set tracing buffer size.
KOSAKI Motohiro631595f2009-03-10 13:57:10 +09002613
Li Zefan020e5f82009-07-01 10:47:05 +08002614 trace_event=[event-list]
2615 [FTRACE] Set and start specified trace events in order
2616 to facilitate early boot debugging.
2617 See also Documentation/trace/events.txt
2618
john stultzd3b8f882009-08-17 16:40:47 -07002619 tsc= Disable clocksource stability checks for TSC.
Alok Kataria395628e2008-10-24 17:22:01 -07002620 Format: <string>
2621 [x86] reliable: mark tsc clocksource as reliable, this
john stultzd3b8f882009-08-17 16:40:47 -07002622 disables clocksource verification at runtime, as well
2623 as the stability checks done at bootup. Used to enable
2624 high-resolution timer mode on older hardware, and in
2625 virtualized environment.
Venkatesh Pallipadie82b8e42010-10-04 17:03:20 -07002626 [x86] noirqtime: Do not use TSC to do irq accounting.
2627 Used to run time disable IRQ_TIME_ACCOUNTING on any
2628 platforms where RDTSC is slow and this accounting
2629 can add overhead.
Alok Kataria395628e2008-10-24 17:22:01 -07002630
Randy Dunlapa9913042005-10-23 12:57:11 -07002631 turbografx.map[2|3]= [HW,JOY]
2632 TurboGraFX parallel port interface
2633 Format:
2634 <port#>,<js1>,<js2>,<js3>,<js4>,<js5>,<js6>,<js7>
Linus Torvalds1da177e2005-04-16 15:20:36 -07002635 See also Documentation/input/joystick-parport.txt
2636
Christian Kujaub6935f82011-05-31 15:22:05 +00002637 udbg-immortal [PPC] When debugging early kernel crashes that
2638 happen after console_init() and before a proper
2639 console driver takes over, this boot options might
2640 help "seeing" what's going on.
2641
Eric Dumazetf86dcc52009-10-07 00:37:59 +00002642 uhash_entries= [KNL,NET]
2643 Set number of hash buckets for UDP/UDP-Lite connections
2644
Alan Stern5f8364b2006-12-05 16:29:55 -05002645 uhci-hcd.ignore_oc=
2646 [USB] Ignore overcurrent events (default N).
2647 Some badly-designed motherboards generate lots of
2648 bogus events, for ports that aren't wired to
2649 anything. Set this parameter to avoid log spamming.
2650 Note that genuine overcurrent events won't be
2651 reported either.
2652
Simon Arlotte3a61b02008-07-19 23:32:54 +01002653 unknown_nmi_panic
Randy Dunlap44a4dcf2011-04-04 15:02:24 -07002654 [X86] Cause panic on unknown NMI.
Simon Arlotte3a61b02008-07-19 23:32:54 +01002655
Carl-Daniel Hailfingerc4fc2342011-05-31 21:31:08 +02002656 usbcore.authorized_default=
2657 [USB] Default USB device authorization:
2658 (default -1 = authorized except for wireless USB,
2659 0 = not authorized, 1 = authorized)
2660
Alan Sternb5e795f2007-02-20 15:00:53 -05002661 usbcore.autosuspend=
2662 [USB] The autosuspend time delay (in seconds) used
2663 for newly-detected USB devices (default 2). This
2664 is the time required before an idle device will be
2665 autosuspended. Devices for which the delay is set
Alan Sterneaafbc32007-03-13 16:39:15 -04002666 to a negative value won't be autosuspended at all.
Alan Sternb5e795f2007-02-20 15:00:53 -05002667
Jaroslav Kyselafd7c5192008-10-10 16:24:45 +02002668 usbcore.usbfs_snoop=
2669 [USB] Set to log all usbfs traffic (default 0 = off).
2670
2671 usbcore.blinkenlights=
2672 [USB] Set to cycle leds on hubs (default 0 = off).
2673
2674 usbcore.old_scheme_first=
2675 [USB] Start with the old device initialization
2676 scheme (default 0 = off).
2677
Alan Stern3f5eb8d2011-11-17 16:41:35 -05002678 usbcore.usbfs_memory_mb=
2679 [USB] Memory limit (in MB) for buffers allocated by
2680 usbfs (default = 16, 0 = max = 2047).
2681
Jaroslav Kyselafd7c5192008-10-10 16:24:45 +02002682 usbcore.use_both_schemes=
2683 [USB] Try the other device initialization scheme
2684 if the first one fails (default 1 = enabled).
2685
2686 usbcore.initial_descriptor_timeout=
2687 [USB] Specifies timeout for the initial 64-byte
2688 USB_REQ_GET_DESCRIPTOR request in milliseconds
2689 (default 5000 = 5.0 seconds).
2690
Linus Torvalds1da177e2005-04-16 15:20:36 -07002691 usbhid.mousepoll=
2692 [USBHID] The interval which mice are to be polled at.
Randy Dunlapa9913042005-10-23 12:57:11 -07002693
Alan Sternd4f373e2008-11-10 14:07:45 -05002694 usb-storage.delay_use=
2695 [UMS] The delay in seconds before a new device is
2696 scanned for Logical Units (default 5).
2697
2698 usb-storage.quirks=
2699 [UMS] A list of quirks entries to supplement or
2700 override the built-in unusual_devs list. List
2701 entries are separated by commas. Each entry has
2702 the form VID:PID:Flags where VID and PID are Vendor
2703 and Product ID values (4-digit hex numbers) and
2704 Flags is a set of characters, each corresponding
2705 to a common usb-storage quirk flag as follows:
Alan Sternc838ea42008-12-15 10:40:06 -05002706 a = SANE_SENSE (collect more than 18 bytes
2707 of sense data);
Alan Sterna0bb1082009-12-07 16:39:16 -05002708 b = BAD_SENSE (don't collect more than 18
2709 bytes of sense data);
Alan Sternd4f373e2008-11-10 14:07:45 -05002710 c = FIX_CAPACITY (decrease the reported
2711 device capacity by one sector);
Karl Relton51169012011-05-18 21:42:34 +01002712 d = NO_READ_DISC_INFO (don't use
2713 READ_DISC_INFO command);
2714 e = NO_READ_CAPACITY_16 (don't use
2715 READ_CAPACITY_16 command);
Alan Sternc838ea42008-12-15 10:40:06 -05002716 h = CAPACITY_HEURISTICS (decrease the
2717 reported device capacity by one
2718 sector if the number is odd);
Alan Sternd4f373e2008-11-10 14:07:45 -05002719 i = IGNORE_DEVICE (don't bind to this
2720 device);
2721 l = NOT_LOCKABLE (don't try to lock and
2722 unlock ejectable media);
2723 m = MAX_SECTORS_64 (don't transfer more
2724 than 64 sectors = 32 KB at a time);
Alan Stern21c13a42011-06-07 11:35:52 -04002725 n = INITIAL_READ10 (force a retry of the
2726 initial READ(10) command);
Alan Sternc838ea42008-12-15 10:40:06 -05002727 o = CAPACITY_OK (accept the capacity
2728 reported by the device);
Alan Sternd4f373e2008-11-10 14:07:45 -05002729 r = IGNORE_RESIDUE (the device reports
2730 bogus residue values);
2731 s = SINGLE_LUN (the device has only one
2732 Logical Unit);
2733 w = NO_WP_DETECT (don't test whether the
2734 medium is write-protected).
2735 Example: quirks=0419:aaf5:rl,0421:0433:rc
2736
Stephen Boydac1667d2011-08-13 12:34:50 -07002737 user_debug= [KNL,ARM]
2738 Format: <int>
2739 See arch/arm/Kconfig.debug help text.
2740 1 - undefined instruction events
2741 2 - system calls
2742 4 - invalid data aborts
2743 8 - SIGSEGV faults
2744 16 - SIGBUS faults
2745 Example: user_debug=31
2746
Ian Campbell14315592010-02-17 10:38:10 +00002747 userpte=
2748 [X86] Flags controlling user PTE allocations.
2749
2750 nohigh = do not allocate PTE pages in
2751 HIGHMEM regardless of setting
2752 of CONFIG_HIGHPTE.
2753
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05302754 vdso= [X86,SH]
Jeremy Fitzhardinge1dbf527c2007-05-02 19:27:12 +02002755 vdso=2: enable compat VDSO (default with COMPAT_VDSO)
Ingo Molnare6e54942006-06-27 02:53:50 -07002756 vdso=1: enable VDSO (default)
2757 vdso=0: disable VDSO mapping
2758
Jaswinder Singh Rajput6cececf2009-04-14 14:03:43 +05302759 vdso32= [X86]
Roland McGrathaf65d642008-01-30 13:30:43 +01002760 vdso32=2: enable compat VDSO (default with COMPAT_VDSO)
2761 vdso32=1: enable 32-bit VDSO (default)
2762 vdso32=0: disable 32-bit VDSO mapping
2763
Yasuaki Ishimatsud080d392007-07-17 21:22:55 +09002764 vector= [IA-64,SMP]
2765 vector=percpu: enable percpu vector domain
2766
Linus Torvalds1da177e2005-04-16 15:20:36 -07002767 video= [FB] Frame buffer configuration
2768 See Documentation/fb/modedb.txt.
2769
Alan Coxcd4f0ef2007-07-31 00:37:59 -07002770 vga= [BOOT,X86-32] Select a particular video mode
Kyle McMartin954a8b82009-02-19 16:48:14 -05002771 See Documentation/x86/boot.txt and
Randy Dunlapa9913042005-10-23 12:57:11 -07002772 Documentation/svga.txt.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002773 Use vga=ask for menu.
2774 This is actually a boot loader parameter; the value is
2775 passed to the kernel using a special protocol.
2776
Randy Dunlapa9913042005-10-23 12:57:11 -07002777 vmalloc=nn[KMG] [KNL,BOOT] Forces the vmalloc area to have an exact
Linus Torvalds1da177e2005-04-16 15:20:36 -07002778 size of <nn>. This can be used to increase the
2779 minimum size (128MB on x86). It can also be used to
2780 decrease the size and leave more room for directly
2781 mapped kernel RAM.
2782
Peter Oberparleiter585c3042006-06-29 15:08:25 +02002783 vmhalt= [KNL,S390] Perform z/VM CP command after system halt.
2784 Format: <command>
Linus Torvalds1da177e2005-04-16 15:20:36 -07002785
Peter Oberparleiter585c3042006-06-29 15:08:25 +02002786 vmpanic= [KNL,S390] Perform z/VM CP command after kernel panic.
2787 Format: <command>
2788
2789 vmpoff= [KNL,S390] Perform z/VM CP command after power off.
2790 Format: <command>
Randy Dunlapa9913042005-10-23 12:57:11 -07002791
Andy Lutomirski3ae36652011-08-10 11:15:32 -04002792 vsyscall= [X86-64]
2793 Controls the behavior of vsyscalls (i.e. calls to
2794 fixed addresses of 0xffffffffff600x00 from legacy
2795 code). Most statically-linked binaries and older
2796 versions of glibc use these calls. Because these
2797 functions are at fixed addresses, they make nice
2798 targets for exploits that can control RIP.
2799
Andy Lutomirski2e57ae02011-11-07 16:33:41 -08002800 emulate [default] Vsyscalls turn into traps and are
2801 emulated reasonably safely.
Andy Lutomirski3ae36652011-08-10 11:15:32 -04002802
Andy Lutomirski2e57ae02011-11-07 16:33:41 -08002803 native Vsyscalls are native syscall instructions.
Andy Lutomirski3ae36652011-08-10 11:15:32 -04002804 This is a little bit faster than trapping
2805 and makes a few dynamic recompilers work
2806 better than they would in emulation mode.
2807 It also makes exploits much easier to write.
2808
2809 none Vsyscalls don't work at all. This makes
2810 them quite hard to use for exploits but
2811 might break your system.
2812
Clemens Ladisch9ea9a882009-12-15 16:45:39 -08002813 vt.cur_default= [VT] Default cursor shape.
2814 Format: 0xCCBBAA, where AA, BB, and CC are the same as
2815 the parameters of the <Esc>[?A;B;Cc escape sequence;
2816 see VGA-softcursor.txt. Default: 2 = underline.
2817
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07002818 vt.default_blu= [VT]
2819 Format: <blue0>,<blue1>,<blue2>,...,<blue15>
2820 Change the default blue palette of the console.
2821 This is a 16-member array composed of values
2822 ranging from 0-255.
2823
2824 vt.default_grn= [VT]
2825 Format: <green0>,<green1>,<green2>,...,<green15>
2826 Change the default green palette of the console.
2827 This is a 16-member array composed of values
2828 ranging from 0-255.
2829
2830 vt.default_red= [VT]
2831 Format: <red0>,<red1>,<red2>,...,<red15>
2832 Change the default red palette of the console.
2833 This is a 16-member array composed of values
2834 ranging from 0-255.
2835
2836 vt.default_utf8=
2837 [VT]
2838 Format=<0|1>
2839 Set system-wide default UTF-8 mode for all tty's.
2840 Default is 1, i.e. UTF-8 mode is enabled for all
2841 newly opened terminals.
2842
Matthew Garrettf6c06b62009-11-13 15:14:11 -05002843 vt.global_cursor_default=
2844 [VT]
2845 Format=<-1|0|1>
2846 Set system-wide default for whether a cursor
2847 is shown on new VTs. Default is -1,
2848 i.e. cursors will be created by default unless
2849 overridden by individual drivers. 0 will hide
2850 cursors, 1 will display them.
2851
Randy Dunlap4724ba572010-05-03 11:42:52 -07002852 watchdog timers [HW,WDT] For information on watchdog timers,
2853 see Documentation/watchdog/watchdog-parameters.txt
2854 or other driver-specific files in the
2855 Documentation/watchdog/ directory.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002856
Randy Dunlap0cb55ad2009-04-05 15:55:22 -07002857 x2apic_phys [X86-64,APIC] Use x2apic physical mode instead of
2858 default x2apic cluster mode on platforms
2859 supporting x2apic.
2860
Jacob Panbb24c472009-09-02 07:37:17 -07002861 x86_mrst_timer= [X86-32,APBT]
2862 Choose timer option for x86 Moorestown MID platform.
2863 Two valid options are apbt timer only and lapic timer
2864 plus one apbt timer for broadcast timer.
2865 x86_mrst_timer=apbt_only | lapic_and_apbt
2866
Linus Torvalds1da177e2005-04-16 15:20:36 -07002867 xd= [HW,XT] Original XT pre-IDE (RLL encoded) disks.
2868 xd_geo= See header of drivers/block/xd.c.
2869
Stefano Stabellinic1c54132010-05-14 12:44:30 +01002870 xen_emul_unplug= [HW,X86,XEN]
2871 Unplug Xen emulated devices
2872 Format: [unplug0,][unplug1]
2873 ide-disks -- unplug primary master IDE devices
2874 aux-ide-disks -- unplug non-primary-master IDE devices
2875 nics -- unplug network devices
2876 all -- unplug all emulated devices (NICs and IDE disks)
Ian Campbell1dc7ce92010-08-23 11:59:29 +01002877 unnecessary -- unplugging emulated devices is
2878 unnecessary even if the host did not respond to
2879 the unplug protocol
Ian Campbellc93a4df2010-08-23 11:59:28 +01002880 never -- do not unplug even if version check succeeds
Stefano Stabellinic1c54132010-05-14 12:44:30 +01002881
Linus Torvalds1da177e2005-04-16 15:20:36 -07002882 xirc2ps_cs= [NET,PCMCIA]
Randy Dunlapa9913042005-10-23 12:57:11 -07002883 Format:
2884 <irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
Linus Torvalds1da177e2005-04-16 15:20:36 -07002885
Randy Dunlapa9913042005-10-23 12:57:11 -07002886______________________________________________________________________
Linus Torvalds1da177e2005-04-16 15:20:36 -07002887
2888TODO:
2889
Linus Torvalds1da177e2005-04-16 15:20:36 -07002890 Add more DRM drivers.