blob: 4e94ba29cb8d321eae212fa27ee1e72658801c34 [file] [log] [blame]
David Milburn02cdfcf2010-11-12 15:38:21 -06001
2/*
3 * acard-ahci.c - ACard AHCI SATA support
4 *
5 * Maintained by: Jeff Garzik <jgarzik@pobox.com>
6 * Please ALWAYS copy linux-ide@vger.kernel.org
7 * on emails.
8 *
9 * Copyright 2010 Red Hat, Inc.
10 *
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2, or (at your option)
15 * any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; see the file COPYING. If not, write to
24 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
25 *
26 *
27 * libata documentation is available via 'make {ps|pdf}docs',
28 * as Documentation/DocBook/libata.*
29 *
30 * AHCI hardware documentation:
31 * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
32 * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf
33 *
34 */
35
36#include <linux/kernel.h>
37#include <linux/module.h>
38#include <linux/pci.h>
39#include <linux/init.h>
40#include <linux/blkdev.h>
41#include <linux/delay.h>
42#include <linux/interrupt.h>
43#include <linux/dma-mapping.h>
44#include <linux/device.h>
45#include <linux/dmi.h>
46#include <linux/gfp.h>
47#include <scsi/scsi_host.h>
48#include <scsi/scsi_cmnd.h>
49#include <linux/libata.h>
50#include "ahci.h"
51
52#define DRV_NAME "acard-ahci"
53#define DRV_VERSION "1.0"
54
55/*
56 Received FIS structure limited to 80h.
57*/
58
59#define ACARD_AHCI_RX_FIS_SZ 128
60
61enum {
62 AHCI_PCI_BAR = 5,
63};
64
65enum board_ids {
66 board_acard_ahci,
67};
68
69struct acard_sg {
70 __le32 addr;
71 __le32 addr_hi;
72 __le32 reserved;
73 __le32 size; /* bit 31 (EOT) max==0x10000 (64k) */
74};
75
76static void acard_ahci_qc_prep(struct ata_queued_cmd *qc);
77static bool acard_ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
78static int acard_ahci_port_start(struct ata_port *ap);
79static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
80
81#ifdef CONFIG_PM
82static int acard_ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
83static int acard_ahci_pci_device_resume(struct pci_dev *pdev);
84#endif
85
86static struct scsi_host_template acard_ahci_sht = {
87 AHCI_SHT("acard-ahci"),
88};
89
90static struct ata_port_operations acard_ops = {
91 .inherits = &ahci_ops,
92 .qc_prep = acard_ahci_qc_prep,
93 .qc_fill_rtf = acard_ahci_qc_fill_rtf,
94 .port_start = acard_ahci_port_start,
95};
96
97#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
98
99static const struct ata_port_info acard_ahci_port_info[] = {
100 [board_acard_ahci] =
101 {
102 AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ),
103 .flags = AHCI_FLAG_COMMON,
104 .pio_mask = ATA_PIO4,
105 .udma_mask = ATA_UDMA6,
106 .port_ops = &acard_ops,
107 },
108};
109
110static const struct pci_device_id acard_ahci_pci_tbl[] = {
111 /* ACard */
112 { PCI_VDEVICE(ARTOP, 0x000d), board_acard_ahci }, /* ATP8620 */
113
114 { } /* terminate list */
115};
116
117static struct pci_driver acard_ahci_pci_driver = {
118 .name = DRV_NAME,
119 .id_table = acard_ahci_pci_tbl,
120 .probe = acard_ahci_init_one,
121 .remove = ata_pci_remove_one,
122#ifdef CONFIG_PM
123 .suspend = acard_ahci_pci_device_suspend,
124 .resume = acard_ahci_pci_device_resume,
125#endif
126};
127
128#ifdef CONFIG_PM
129static int acard_ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
130{
131 struct ata_host *host = dev_get_drvdata(&pdev->dev);
132 struct ahci_host_priv *hpriv = host->private_data;
133 void __iomem *mmio = hpriv->mmio;
134 u32 ctl;
135
136 if (mesg.event & PM_EVENT_SUSPEND &&
137 hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
Joe Perchesa44fec12011-04-15 15:51:58 -0700138 dev_err(&pdev->dev,
139 "BIOS update required for suspend/resume\n");
David Milburn02cdfcf2010-11-12 15:38:21 -0600140 return -EIO;
141 }
142
143 if (mesg.event & PM_EVENT_SLEEP) {
144 /* AHCI spec rev1.1 section 8.3.3:
145 * Software must disable interrupts prior to requesting a
146 * transition of the HBA to D3 state.
147 */
148 ctl = readl(mmio + HOST_CTL);
149 ctl &= ~HOST_IRQ_EN;
150 writel(ctl, mmio + HOST_CTL);
151 readl(mmio + HOST_CTL); /* flush */
152 }
153
154 return ata_pci_device_suspend(pdev, mesg);
155}
156
157static int acard_ahci_pci_device_resume(struct pci_dev *pdev)
158{
159 struct ata_host *host = dev_get_drvdata(&pdev->dev);
160 int rc;
161
162 rc = ata_pci_device_do_resume(pdev);
163 if (rc)
164 return rc;
165
166 if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
167 rc = ahci_reset_controller(host);
168 if (rc)
169 return rc;
170
171 ahci_init_controller(host);
172 }
173
174 ata_host_resume(host);
175
176 return 0;
177}
178#endif
179
180static int acard_ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
181{
182 int rc;
183
184 if (using_dac &&
185 !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
186 rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
187 if (rc) {
188 rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
189 if (rc) {
Joe Perchesa44fec12011-04-15 15:51:58 -0700190 dev_err(&pdev->dev,
David Milburn02cdfcf2010-11-12 15:38:21 -0600191 "64-bit DMA enable failed\n");
192 return rc;
193 }
194 }
195 } else {
196 rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
197 if (rc) {
Joe Perchesa44fec12011-04-15 15:51:58 -0700198 dev_err(&pdev->dev, "32-bit DMA enable failed\n");
David Milburn02cdfcf2010-11-12 15:38:21 -0600199 return rc;
200 }
201 rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
202 if (rc) {
Joe Perchesa44fec12011-04-15 15:51:58 -0700203 dev_err(&pdev->dev,
204 "32-bit consistent DMA enable failed\n");
David Milburn02cdfcf2010-11-12 15:38:21 -0600205 return rc;
206 }
207 }
208 return 0;
209}
210
211static void acard_ahci_pci_print_info(struct ata_host *host)
212{
213 struct pci_dev *pdev = to_pci_dev(host->dev);
214 u16 cc;
215 const char *scc_s;
216
217 pci_read_config_word(pdev, 0x0a, &cc);
218 if (cc == PCI_CLASS_STORAGE_IDE)
219 scc_s = "IDE";
220 else if (cc == PCI_CLASS_STORAGE_SATA)
221 scc_s = "SATA";
222 else if (cc == PCI_CLASS_STORAGE_RAID)
223 scc_s = "RAID";
224 else
225 scc_s = "unknown";
226
227 ahci_print_info(host, scc_s);
228}
229
230static unsigned int acard_ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
231{
232 struct scatterlist *sg;
233 struct acard_sg *acard_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ;
234 unsigned int si, last_si = 0;
235
236 VPRINTK("ENTER\n");
237
238 /*
239 * Next, the S/G list.
240 */
241 for_each_sg(qc->sg, sg, qc->n_elem, si) {
242 dma_addr_t addr = sg_dma_address(sg);
243 u32 sg_len = sg_dma_len(sg);
244
245 /*
246 * ACard note:
247 * We must set an end-of-table (EOT) bit,
248 * and the segment cannot exceed 64k (0x10000)
249 */
250 acard_sg[si].addr = cpu_to_le32(addr & 0xffffffff);
251 acard_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16);
252 acard_sg[si].size = cpu_to_le32(sg_len);
253 last_si = si;
254 }
255
256 acard_sg[last_si].size |= cpu_to_le32(1 << 31); /* set EOT */
257
258 return si;
259}
260
261static void acard_ahci_qc_prep(struct ata_queued_cmd *qc)
262{
263 struct ata_port *ap = qc->ap;
264 struct ahci_port_priv *pp = ap->private_data;
265 int is_atapi = ata_is_atapi(qc->tf.protocol);
266 void *cmd_tbl;
267 u32 opts;
268 const u32 cmd_fis_len = 5; /* five dwords */
269 unsigned int n_elem;
270
271 /*
272 * Fill in command table information. First, the header,
273 * a SATA Register - Host to Device command FIS.
274 */
275 cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ;
276
277 ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl);
278 if (is_atapi) {
279 memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32);
280 memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len);
281 }
282
283 n_elem = 0;
284 if (qc->flags & ATA_QCFLAG_DMAMAP)
285 n_elem = acard_ahci_fill_sg(qc, cmd_tbl);
286
287 /*
288 * Fill in command slot information.
289 *
290 * ACard note: prd table length not filled in
291 */
292 opts = cmd_fis_len | (qc->dev->link->pmp << 12);
293 if (qc->tf.flags & ATA_TFLAG_WRITE)
294 opts |= AHCI_CMD_WRITE;
295 if (is_atapi)
296 opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH;
297
298 ahci_fill_cmd_slot(pp, qc->tag, opts);
299}
300
301static bool acard_ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
302{
303 struct ahci_port_priv *pp = qc->ap->private_data;
304 u8 *rx_fis = pp->rx_fis;
305
306 if (pp->fbs_enabled)
307 rx_fis += qc->dev->link->pmp * ACARD_AHCI_RX_FIS_SZ;
308
309 /*
310 * After a successful execution of an ATA PIO data-in command,
311 * the device doesn't send D2H Reg FIS to update the TF and
312 * the host should take TF and E_Status from the preceding PIO
313 * Setup FIS.
314 */
315 if (qc->tf.protocol == ATA_PROT_PIO && qc->dma_dir == DMA_FROM_DEVICE &&
316 !(qc->flags & ATA_QCFLAG_FAILED)) {
317 ata_tf_from_fis(rx_fis + RX_FIS_PIO_SETUP, &qc->result_tf);
318 qc->result_tf.command = (rx_fis + RX_FIS_PIO_SETUP)[15];
319 } else
320 ata_tf_from_fis(rx_fis + RX_FIS_D2H_REG, &qc->result_tf);
321
322 return true;
323}
324
325static int acard_ahci_port_start(struct ata_port *ap)
326{
327 struct ahci_host_priv *hpriv = ap->host->private_data;
328 struct device *dev = ap->host->dev;
329 struct ahci_port_priv *pp;
330 void *mem;
331 dma_addr_t mem_dma;
332 size_t dma_sz, rx_fis_sz;
333
334 pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
335 if (!pp)
336 return -ENOMEM;
337
338 /* check FBS capability */
339 if ((hpriv->cap & HOST_CAP_FBS) && sata_pmp_supported(ap)) {
340 void __iomem *port_mmio = ahci_port_base(ap);
341 u32 cmd = readl(port_mmio + PORT_CMD);
342 if (cmd & PORT_CMD_FBSCP)
343 pp->fbs_supported = true;
344 else if (hpriv->flags & AHCI_HFLAG_YES_FBS) {
Joe Perchesa44fec12011-04-15 15:51:58 -0700345 dev_info(dev, "port %d can do FBS, forcing FBSCP\n",
346 ap->port_no);
David Milburn02cdfcf2010-11-12 15:38:21 -0600347 pp->fbs_supported = true;
348 } else
Joe Perchesa44fec12011-04-15 15:51:58 -0700349 dev_warn(dev, "port %d is not capable of FBS\n",
350 ap->port_no);
David Milburn02cdfcf2010-11-12 15:38:21 -0600351 }
352
353 if (pp->fbs_supported) {
354 dma_sz = AHCI_PORT_PRIV_FBS_DMA_SZ;
355 rx_fis_sz = ACARD_AHCI_RX_FIS_SZ * 16;
356 } else {
357 dma_sz = AHCI_PORT_PRIV_DMA_SZ;
358 rx_fis_sz = ACARD_AHCI_RX_FIS_SZ;
359 }
360
361 mem = dmam_alloc_coherent(dev, dma_sz, &mem_dma, GFP_KERNEL);
362 if (!mem)
363 return -ENOMEM;
364 memset(mem, 0, dma_sz);
365
366 /*
367 * First item in chunk of DMA memory: 32-slot command table,
368 * 32 bytes each in size
369 */
370 pp->cmd_slot = mem;
371 pp->cmd_slot_dma = mem_dma;
372
373 mem += AHCI_CMD_SLOT_SZ;
374 mem_dma += AHCI_CMD_SLOT_SZ;
375
376 /*
377 * Second item: Received-FIS area
378 */
379 pp->rx_fis = mem;
380 pp->rx_fis_dma = mem_dma;
381
382 mem += rx_fis_sz;
383 mem_dma += rx_fis_sz;
384
385 /*
386 * Third item: data area for storing a single command
387 * and its scatter-gather table
388 */
389 pp->cmd_tbl = mem;
390 pp->cmd_tbl_dma = mem_dma;
391
392 /*
393 * Save off initial list of interrupts to be enabled.
394 * This could be changed later
395 */
396 pp->intr_mask = DEF_PORT_IRQ;
397
398 ap->private_data = pp;
399
400 /* engage engines, captain */
401 return ahci_port_resume(ap);
402}
403
404static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
405{
David Milburn02cdfcf2010-11-12 15:38:21 -0600406 unsigned int board_id = ent->driver_data;
407 struct ata_port_info pi = acard_ahci_port_info[board_id];
408 const struct ata_port_info *ppi[] = { &pi, NULL };
409 struct device *dev = &pdev->dev;
410 struct ahci_host_priv *hpriv;
411 struct ata_host *host;
412 int n_ports, i, rc;
413
414 VPRINTK("ENTER\n");
415
Jeff Garzikf68b3af2011-05-19 20:45:15 -0400416 WARN_ON((int)ATA_MAX_QUEUE > AHCI_MAX_CMDS);
David Milburn02cdfcf2010-11-12 15:38:21 -0600417
Joe Perches06296a12011-04-15 15:52:00 -0700418 ata_print_version_once(&pdev->dev, DRV_VERSION);
David Milburn02cdfcf2010-11-12 15:38:21 -0600419
420 /* acquire resources */
421 rc = pcim_enable_device(pdev);
422 if (rc)
423 return rc;
424
425 /* AHCI controllers often implement SFF compatible interface.
426 * Grab all PCI BARs just in case.
427 */
428 rc = pcim_iomap_regions_request_all(pdev, 1 << AHCI_PCI_BAR, DRV_NAME);
429 if (rc == -EBUSY)
430 pcim_pin_device(pdev);
431 if (rc)
432 return rc;
433
434 hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
435 if (!hpriv)
436 return -ENOMEM;
437 hpriv->flags |= (unsigned long)pi.private_data;
438
439 if (!(hpriv->flags & AHCI_HFLAG_NO_MSI))
440 pci_enable_msi(pdev);
441
442 hpriv->mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
443
444 /* save initial config */
445 ahci_save_initial_config(&pdev->dev, hpriv, 0, 0);
446
447 /* prepare host */
448 if (hpriv->cap & HOST_CAP_NCQ)
449 pi.flags |= ATA_FLAG_NCQ;
450
451 if (hpriv->cap & HOST_CAP_PMP)
452 pi.flags |= ATA_FLAG_PMP;
453
454 ahci_set_em_messages(hpriv, &pi);
455
456 /* CAP.NP sometimes indicate the index of the last enabled
457 * port, at other times, that of the last possible port, so
458 * determining the maximum port number requires looking at
459 * both CAP.NP and port_map.
460 */
461 n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
462
463 host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
464 if (!host)
465 return -ENOMEM;
466 host->private_data = hpriv;
467
468 if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
469 host->flags |= ATA_HOST_PARALLEL_SCAN;
470 else
471 printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
472
473 for (i = 0; i < host->n_ports; i++) {
474 struct ata_port *ap = host->ports[i];
475
476 ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar");
477 ata_port_pbar_desc(ap, AHCI_PCI_BAR,
478 0x100 + ap->port_no * 0x80, "port");
479
480 /* set initial link pm policy */
481 /*
482 ap->pm_policy = NOT_AVAILABLE;
483 */
484 /* disabled/not-implemented port */
485 if (!(hpriv->port_map & (1 << i)))
486 ap->ops = &ata_dummy_port_ops;
487 }
488
489 /* initialize adapter */
490 rc = acard_ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
491 if (rc)
492 return rc;
493
494 rc = ahci_reset_controller(host);
495 if (rc)
496 return rc;
497
498 ahci_init_controller(host);
499 acard_ahci_pci_print_info(host);
500
501 pci_set_master(pdev);
502 return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
503 &acard_ahci_sht);
504}
505
Axel Lin2fc75da2012-04-19 13:43:05 +0800506module_pci_driver(acard_ahci_pci_driver);
David Milburn02cdfcf2010-11-12 15:38:21 -0600507
508MODULE_AUTHOR("Jeff Garzik");
509MODULE_DESCRIPTION("ACard AHCI SATA low-level driver");
510MODULE_LICENSE("GPL");
511MODULE_DEVICE_TABLE(pci, acard_ahci_pci_tbl);
512MODULE_VERSION(DRV_VERSION);