blob: a78dc1ca8c29d16324f2fbf1b696e94bf1cef1b4 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001
2/*
3 * snull.h -- definitions for the network module
4 *
5 * Copyright (C) 2001 Alessandro Rubini and Jonathan Corbet
6 * Copyright (C) 2001 O'Reilly & Associates
7 *
8 * The source code in this file can be freely used, adapted,
9 * and redistributed in source or binary form, so long as an
10 * acknowledgment appears in derived source files. The citation
11 * should list that the code comes from the book "Linux Device
12 * Drivers" by Alessandro Rubini and Jonathan Corbet, published
13 * by O'Reilly & Associates. No warranty is attached;
14 * we cannot take responsibility for errors or fitness for use.
15 */
16
17/* version dependencies have been confined to a separate file */
18
19/* Tunable parameters */
20#define TX_RING_ENTRIES 64 /* 64-512?*/
21
22#define RX_RING_ENTRIES 16 /* Do not change */
23/* Internal constants */
24#define TX_RING_BUFFER_SIZE (TX_RING_ENTRIES*sizeof(tx_packet))
25#define RX_BUFFER_SIZE 1546 /* ethenet packet size */
26#define METH_RX_BUFF_SIZE 4096
27#define METH_RX_HEAD 34 /* status + 3 quad garbage-fill + 2 byte zero-pad */
28#define RX_BUFFER_OFFSET (sizeof(rx_status_vector)+2) /* staus vector + 2 bytes of padding */
29#define RX_BUCKET_SIZE 256
30
Linus Torvalds1da177e2005-04-16 15:20:36 -070031/* For more detailed explanations of what each field menas,
32 see Nick's great comments to #defines below (or docs, if
33 you are lucky enough toget hold of them :)*/
34
35/* tx status vector is written over tx command header upon
36 dma completion. */
37
38typedef struct tx_status_vector {
39 u64 sent:1; /* always set to 1...*/
40 u64 pad0:34;/* always set to 0 */
41 u64 flags:9; /*I'm too lazy to specify each one separately at the moment*/
42 u64 col_retry_cnt:4; /*collision retry count*/
43 u64 len:16; /*Transmit length in bytes*/
44} tx_status_vector;
45
46/*
47 * Each packet is 128 bytes long.
48 * It consists of header, 0-3 concatination
49 * buffer pointers and up to 120 data bytes.
50 */
51typedef struct tx_packet_hdr {
52 u64 pad1:36; /*should be filled with 0 */
53 u64 cat_ptr3_valid:1, /*Concatination pointer valid flags*/
54 cat_ptr2_valid:1,
55 cat_ptr1_valid:1;
56 u64 tx_int_flag:1; /*Generate TX intrrupt when packet has been sent*/
57 u64 term_dma_flag:1; /*Terminate transmit DMA on transmit abort conditions*/
58 u64 data_offset:7; /*Starting byte offset in ring data block*/
59 u64 data_len:16; /*Length of valid data in bytes-1*/
60} tx_packet_hdr;
61typedef union tx_cat_ptr {
62 struct {
63 u64 pad2:16; /* should be 0 */
64 u64 len:16; /*length of buffer data - 1*/
65 u64 start_addr:29; /*Physical starting address*/
66 u64 pad1:3; /* should be zero */
67 } form;
68 u64 raw;
69} tx_cat_ptr;
70
71typedef struct tx_packet {
72 union {
73 tx_packet_hdr header;
74 tx_status_vector res;
75 u64 raw;
76 }header;
77 union {
78 tx_cat_ptr cat_buf[3];
79 char dt[120];
80 } data;
81} tx_packet;
82
83typedef union rx_status_vector {
84 volatile struct {
85 u64 pad1:1;/*fill it with ones*/
86 u64 pad2:15;/*fill with 0*/
87 u64 ip_chk_sum:16;
88 u64 seq_num:5;
89 u64 mac_addr_match:1;
90 u64 mcast_addr_match:1;
91 u64 carrier_event_seen:1;
92 u64 bad_packet:1;
93 u64 long_event_seen:1;
94 u64 invalid_preamble:1;
95 u64 broadcast:1;
96 u64 multicast:1;
97 u64 crc_error:1;
98 u64 huh:1;/*???*/
99 u64 rx_code_violation:1;
100 u64 rx_len:16;
101 } parsed;
102 volatile u64 raw;
103} rx_status_vector;
104
105typedef struct rx_packet {
106 rx_status_vector status;
107 u64 pad[3]; /* For whatever reason, there needs to be 4 double-word offset */
108 u16 pad2;
109 char buf[METH_RX_BUFF_SIZE-sizeof(rx_status_vector)-3*sizeof(u64)-sizeof(u16)];/* data */
110} rx_packet;
111
112#define TX_INFO_RPTR 0x00FF0000
113#define TX_INFO_WPTR 0x000000FF
114
115 /* Bits in METH_MAC */
116
117#define SGI_MAC_RESET BIT(0) /* 0: MAC110 active in run mode, 1: Global reset signal to MAC110 core is active */
118#define METH_PHY_FDX BIT(1) /* 0: Disable full duplex, 1: Enable full duplex */
119#define METH_PHY_LOOP BIT(2) /* 0: Normal operation, follows 10/100mbit and M10T/MII select, 1: loops internal MII bus */
120 /* selects ignored */
121#define METH_100MBIT BIT(3) /* 0: 10meg mode, 1: 100meg mode */
122#define METH_PHY_MII BIT(4) /* 0: MII selected, 1: SIA selected */
123 /* Note: when loopback is set this bit becomes collision control. Setting this bit will */
124 /* cause a collision to be reported. */
125
Michael Opdenacker59c51592007-05-09 08:57:56 +0200126 /* Bits 5 and 6 are used to determine the Destination address filter mode */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700127#define METH_ACCEPT_MY 0 /* 00: Accept PHY address only */
128#define METH_ACCEPT_MCAST 0x20 /* 01: Accept physical, broadcast, and multicast filter matches only */
129#define METH_ACCEPT_AMCAST 0x40 /* 10: Accept physical, broadcast, and all multicast packets */
130#define METH_PROMISC 0x60 /* 11: Promiscious mode */
131
132#define METH_PHY_LINK_FAIL BIT(7) /* 0: Link failure detection disabled, 1: Hardware scans for link failure in PHY */
133
134#define METH_MAC_IPG 0x1ffff00
135
136#define METH_DEFAULT_IPG ((17<<15) | (11<<22) | (21<<8))
137 /* 0x172e5c00 */ /* 23, 23, 23 */ /*0x54A9500 *//*21,21,21*/
138 /* Bits 8 through 14 are used to determine Inter-Packet Gap between "Back to Back" packets */
139 /* The gap depends on the clock speed of the link, 80ns per increment for 100baseT, 800ns */
140 /* per increment for 10BaseT */
141
142 /* Bits 15 through 21 are used to determine IPGR1 */
143
144 /* Bits 22 through 28 are used to determine IPGR2 */
145
146#define METH_REV_SHIFT 29 /* Bits 29 through 31 are used to determine the revision */
147 /* 000: Inital revision */
148 /* 001: First revision, Improved TX concatenation */
149
150
151/* DMA control bits */
152#define METH_RX_OFFSET_SHIFT 12 /* Bits 12:14 of DMA control register indicate starting offset of packet data for RX operation */
153#define METH_RX_DEPTH_SHIFT 4 /* Bits 8:4 define RX fifo depth -- when # of RX fifo entries != depth, interrupt is generted */
154
155#define METH_DMA_TX_EN BIT(1) /* enable TX DMA */
156#define METH_DMA_TX_INT_EN BIT(0) /* enable TX Buffer Empty interrupt */
157#define METH_DMA_RX_EN BIT(15) /* Enable RX */
158#define METH_DMA_RX_INT_EN BIT(9) /* Enable interrupt on RX packet */
159
160/* RX FIFO MCL Info bits */
161#define METH_RX_FIFO_WPTR(x) (((x)>>16)&0xf)
162#define METH_RX_FIFO_RPTR(x) (((x)>>8)&0xf)
163#define METH_RX_FIFO_DEPTH(x) ((x)&0x1f)
164
165/* RX status bits */
166
167#define METH_RX_ST_VALID BIT(63)
168#define METH_RX_ST_RCV_CODE_VIOLATION BIT(16)
169#define METH_RX_ST_DRBL_NBL BIT(17)
170#define METH_RX_ST_CRC_ERR BIT(18)
171#define METH_RX_ST_MCAST_PKT BIT(19)
172#define METH_RX_ST_BCAST_PKT BIT(20)
173#define METH_RX_ST_INV_PREAMBLE_CTX BIT(21)
174#define METH_RX_ST_LONG_EVT_SEEN BIT(22)
175#define METH_RX_ST_BAD_PACKET BIT(23)
176#define METH_RX_ST_CARRIER_EVT_SEEN BIT(24)
177#define METH_RX_ST_MCAST_FILTER_MATCH BIT(25)
178#define METH_RX_ST_PHYS_ADDR_MATCH BIT(26)
179
180#define METH_RX_STATUS_ERRORS \
181 ( \
182 METH_RX_ST_RCV_CODE_VIOLATION| \
183 METH_RX_ST_CRC_ERR| \
184 METH_RX_ST_INV_PREAMBLE_CTX| \
185 METH_RX_ST_LONG_EVT_SEEN| \
186 METH_RX_ST_BAD_PACKET| \
187 METH_RX_ST_CARRIER_EVT_SEEN \
188 )
189 /* Bits in METH_INT */
190 /* Write _1_ to corresponding bit to clear */
191#define METH_INT_TX_EMPTY BIT(0) /* 0: No interrupt pending, 1: The TX ring buffer is empty */
192#define METH_INT_TX_PKT BIT(1) /* 0: No interrupt pending */
193 /* 1: A TX message had the INT request bit set, the packet has been sent. */
194#define METH_INT_TX_LINK_FAIL BIT(2) /* 0: No interrupt pending, 1: PHY has reported a link failure */
195#define METH_INT_MEM_ERROR BIT(3) /* 0: No interrupt pending */
196 /* 1: A memory error occurred durring DMA, DMA stopped, Fatal */
197#define METH_INT_TX_ABORT BIT(4) /* 0: No interrupt pending, 1: The TX aborted operation, DMA stopped, FATAL */
198#define METH_INT_RX_THRESHOLD BIT(5) /* 0: No interrupt pending, 1: Selected receive threshold condition Valid */
199#define METH_INT_RX_UNDERFLOW BIT(6) /* 0: No interrupt pending, 1: FIFO was empty, packet could not be queued */
200#define METH_INT_RX_OVERFLOW BIT(7) /* 0: No interrupt pending, 1: DMA FIFO Overflow, DMA stopped, FATAL */
201
202/*#define METH_INT_RX_RPTR_MASK 0x0001F00*/ /* Bits 8 through 12 alias of RX read-pointer */
203#define METH_INT_RX_RPTR_MASK 0x0000F00 /* Bits 8 through 11 alias of RX read-pointer - so, is Rx FIFO 16 or 32 entry?*/
204
205 /* Bits 13 through 15 are always 0. */
206
207#define METH_INT_TX_RPTR_MASK 0x1FF0000 /* Bits 16 through 24 alias of TX read-pointer */
208
209#define METH_INT_RX_SEQ_MASK 0x2E000000 /* Bits 25 through 29 are the starting seq number for the message at the */
210
211 /* top of the queue */
212
213#define METH_INT_ERROR (METH_INT_TX_LINK_FAIL| \
214 METH_INT_MEM_ERROR| \
215 METH_INT_TX_ABORT| \
216 METH_INT_RX_OVERFLOW| \
217 METH_INT_RX_UNDERFLOW)
218
219#define METH_INT_MCAST_HASH BIT(30) /* If RX DMA is enabled the hash select logic output is latched here */
220
221/* TX status bits */
222#define METH_TX_ST_DONE BIT(63) /* TX complete */
223#define METH_TX_ST_SUCCESS BIT(23) /* Packet was transmitted successfully */
224#define METH_TX_ST_TOOLONG BIT(24) /* TX abort due to excessive length */
225#define METH_TX_ST_UNDERRUN BIT(25) /* TX abort due to underrun (?) */
226#define METH_TX_ST_EXCCOLL BIT(26) /* TX abort due to excess collisions */
227#define METH_TX_ST_DEFER BIT(27) /* TX abort due to excess deferals */
228#define METH_TX_ST_LATECOLL BIT(28) /* TX abort due to late collision */
229
230
231/* Tx command header bits */
232#define METH_TX_CMD_INT_EN BIT(24) /* Generate TX interrupt when packet is sent */
233
234/* Phy MDIO interface busy flag */
235#define MDIO_BUSY BIT(16)
236#define MDIO_DATA_MASK 0xFFFF
237/* PHY defines */
238#define PHY_QS6612X 0x0181441 /* Quality TX */
239#define PHY_ICS1889 0x0015F41 /* ICS FX */
240#define PHY_ICS1890 0x0015F42 /* ICS TX */
241#define PHY_DP83840 0x20005C0 /* National TX */
242
243#define ADVANCE_RX_PTR(x) x=(x+1)&(RX_RING_ENTRIES-1)