blob: 7ee770b5ef5fc0664d75d3b62a9798af0c06a10d [file] [log] [blame]
Giuseppe CAVALLAROa1d6f3f2010-03-31 21:44:04 +00001 STMicroelectronics 10/100/1000 Synopsys Ethernet driver
2
3Copyright (C) 2007-2010 STMicroelectronics Ltd
4Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
5
6This is the driver for the MAC 10/100/1000 on-chip Ethernet controllers
7(Synopsys IP blocks); it has been fully tested on STLinux platforms.
8
9Currently this network device driver is for all STM embedded MAC/GMAC
10(7xxx SoCs).
11
12DWC Ether MAC 10/100/1000 Universal version 3.41a and DWC Ether MAC 10/100
13Universal version 4.0 have been used for developing the first code
14implementation.
15
16Please, for more information also visit: www.stlinux.com
17
181) Kernel Configuration
19The kernel configuration option is STMMAC_ETH:
20 Device Drivers ---> Network device support ---> Ethernet (1000 Mbit) --->
21 STMicroelectronics 10/100/1000 Ethernet driver (STMMAC_ETH)
22
232) Driver parameters list:
24 debug: message level (0: no output, 16: all);
25 phyaddr: to manually provide the physical address to the PHY device;
26 dma_rxsize: DMA rx ring size;
27 dma_txsize: DMA tx ring size;
28 buf_sz: DMA buffer size;
29 tc: control the HW FIFO threshold;
30 tx_coe: Enable/Disable Tx Checksum Offload engine;
31 watchdog: transmit timeout (in milliseconds);
32 flow_ctrl: Flow control ability [on/off];
33 pause: Flow Control Pause Time;
34 tmrate: timer period (only if timer optimisation is configured).
35
363) Command line options
37Driver parameters can be also passed in command line by using:
38 stmmaceth=dma_rxsize:128,dma_txsize:512
39
404) Driver information and notes
41
424.1) Transmit process
43The xmit method is invoked when the kernel needs to transmit a packet; it sets
44the descriptors in the ring and informs the DMA engine that there is a packet
45ready to be transmitted.
46Once the controller has finished transmitting the packet, an interrupt is
47triggered; So the driver will be able to release the socket buffers.
48By default, the driver sets the NETIF_F_SG bit in the features field of the
49net_device structure enabling the scatter/gather feature.
50
514.2) Receive process
52When one or more packets are received, an interrupt happens. The interrupts
53are not queued so the driver has to scan all the descriptors in the ring during
54the receive process.
55This is based on NAPI so the interrupt handler signals only if there is work to be
56done, and it exits.
57Then the poll method will be scheduled at some future point.
58The incoming packets are stored, by the DMA, in a list of pre-allocated socket
59buffers in order to avoid the memcpy (Zero-copy).
60
614.3) Timer-Driver Interrupt
62Instead of having the device that asynchronously notifies the frame receptions, the
63driver configures a timer to generate an interrupt at regular intervals.
64Based on the granularity of the timer, the frames that are received by the device
65will experience different levels of latency. Some NICs have dedicated timer
66device to perform this task. STMMAC can use either the RTC device or the TMU
67channel 2 on STLinux platforms.
68The timers frequency can be passed to the driver as parameter; when change it,
69take care of both hardware capability and network stability/performance impact.
70Several performance tests on STM platforms showed this optimisation allows to spare
71the CPU while having the maximum throughput.
72
734.4) WOL
74Wake up on Lan feature through Magic Frame is only supported for the GMAC
75core.
76
774.5) DMA descriptors
78Driver handles both normal and enhanced descriptors. The latter has been only
79tested on DWC Ether MAC 10/100/1000 Universal version 3.41a.
80
814.6) Ethtool support
82Ethtool is supported. Driver statistics and internal errors can be taken using:
83ethtool -S ethX command. It is possible to dump registers etc.
84
854.7) Jumbo and Segmentation Offloading
86Jumbo frames are supported and tested for the GMAC.
87The GSO has been also added but it's performed in software.
88LRO is not supported.
89
904.8) Physical
91The driver is compatible with PAL to work with PHY and GPHY devices.
92
934.9) Platform information
94Several information came from the platform; please refer to the
95driver's Header file in include/linux directory.
96
97struct plat_stmmacenet_data {
98 int bus_id;
99 int pbl;
100 int has_gmac;
101 void (*fix_mac_speed)(void *priv, unsigned int speed);
102 void (*bus_setup)(unsigned long ioaddr);
103#ifdef CONFIG_STM_DRIVERS
104 struct stm_pad_config *pad_config;
105#endif
106 void *bsp_priv;
107};
108
109Where:
110- pbl (Programmable Burst Length) is maximum number of
111 beats to be transferred in one DMA transaction.
112 GMAC also enables the 4xPBL by default.
113- fix_mac_speed and bus_setup are used to configure internal target
114 registers (on STM platforms);
115- has_gmac: GMAC core is on board (get it at run-time in the next step);
116- bus_id: bus identifier.
117
118struct plat_stmmacphy_data {
119 int bus_id;
120 int phy_addr;
121 unsigned int phy_mask;
122 int interface;
123 int (*phy_reset)(void *priv);
124 void *priv;
125};
126
127Where:
128- bus_id: bus identifier;
129- phy_addr: physical address used for the attached phy device;
130 set it to -1 to get it at run-time;
131- interface: physical MII interface mode;
132- phy_reset: hook to reset HW function.
133
134TODO:
135- Continue to make the driver more generic and suitable for other Synopsys
136 Ethernet controllers used on other architectures (i.e. ARM).
137- 10G controllers are not supported.
138- MAC uses Normal descriptors and GMAC uses enhanced ones.
139 This is a limit that should be reviewed. MAC could want to
140 use the enhanced structure.
141- Checksumming: Rx/Tx csum is done in HW in case of GMAC only.
142- Review the timer optimisation code to use an embedded device that seems to be
143 available in new chip generations.