blob: 9165b0c40ed32a6b4e8a851e5c81f9b1f68f8be0 [file] [log] [blame]
Yunfan Zhang49d8c592012-09-08 03:52:18 -07001/*
2 * FAN53555 Fairchild Digitally Programmable TinyBuck Regulator Driver.
3 *
4 * Supported Part Numbers:
5 * FAN53555UC00X/01X/03X/04X/05X
6 *
7 * Copyright (c) 2012 Marvell Technology Ltd.
8 * Yunfan Zhang <yfzhang@marvell.com>
9 *
10 * This package is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 *
14 */
15#include <linux/module.h>
16#include <linux/param.h>
17#include <linux/err.h>
18#include <linux/platform_device.h>
19#include <linux/regulator/driver.h>
20#include <linux/regulator/machine.h>
21#include <linux/i2c.h>
22#include <linux/slab.h>
23#include <linux/regmap.h>
24#include <linux/regulator/fan53555.h>
25
26/* Voltage setting */
27#define FAN53555_VSEL0 0x00
28#define FAN53555_VSEL1 0x01
29/* Control register */
30#define FAN53555_CONTROL 0x02
31/* IC Type */
32#define FAN53555_ID1 0x03
33/* IC mask version */
34#define FAN53555_ID2 0x04
35/* Monitor register */
36#define FAN53555_MONITOR 0x05
37
38/* VSEL bit definitions */
39#define VSEL_BUCK_EN (1 << 7)
40#define VSEL_MODE (1 << 6)
41#define VSEL_NSEL_MASK 0x3F
42/* Chip ID and Verison */
43#define DIE_ID 0x0F /* ID1 */
44#define DIE_REV 0x0F /* ID2 */
45/* Control bit definitions */
46#define CTL_OUTPUT_DISCHG (1 << 7)
47#define CTL_SLEW_MASK (0x7 << 4)
48#define CTL_SLEW_SHIFT 4
49#define CTL_RESET (1 << 2)
50
51#define FAN53555_NVOLTAGES 64 /* Numbers of voltages */
52
53/* IC Type */
54enum {
55 FAN53555_CHIP_ID_00 = 0,
56 FAN53555_CHIP_ID_01,
57 FAN53555_CHIP_ID_02,
58 FAN53555_CHIP_ID_03,
59 FAN53555_CHIP_ID_04,
60 FAN53555_CHIP_ID_05,
61};
62
63struct fan53555_device_info {
64 struct regmap *regmap;
65 struct device *dev;
66 struct regulator_desc desc;
67 struct regulator_dev *rdev;
68 struct regulator_init_data *regulator;
69 /* IC Type and Rev */
70 int chip_id;
71 int chip_rev;
72 /* Voltage setting register */
73 unsigned int vol_reg;
74 unsigned int sleep_reg;
75 /* Voltage range and step(linear) */
76 unsigned int vsel_min;
Yunfan Zhang49d8c592012-09-08 03:52:18 -070077 unsigned int vsel_step;
78 /* Voltage slew rate limiting */
79 unsigned int slew_rate;
80 /* Sleep voltage cache */
81 unsigned int sleep_vol_cache;
82};
83
84static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV)
85{
86 struct fan53555_device_info *di = rdev_get_drvdata(rdev);
87 int ret;
88
89 if (di->sleep_vol_cache == uV)
90 return 0;
91 ret = regulator_map_voltage_linear(rdev, uV, uV);
92 if (ret < 0)
93 return -EINVAL;
94 ret = regmap_update_bits(di->regmap, di->sleep_reg,
95 VSEL_NSEL_MASK, ret);
96 if (ret < 0)
97 return -EINVAL;
98 /* Cache the sleep voltage setting.
99 * Might not be the real voltage which is rounded */
100 di->sleep_vol_cache = uV;
101
102 return 0;
103}
104
105static int fan53555_set_mode(struct regulator_dev *rdev, unsigned int mode)
106{
107 struct fan53555_device_info *di = rdev_get_drvdata(rdev);
108
109 switch (mode) {
110 case REGULATOR_MODE_FAST:
111 regmap_update_bits(di->regmap, di->vol_reg,
112 VSEL_MODE, VSEL_MODE);
113 break;
114 case REGULATOR_MODE_NORMAL:
115 regmap_update_bits(di->regmap, di->vol_reg, VSEL_MODE, 0);
116 break;
117 default:
118 return -EINVAL;
119 }
120 return 0;
121}
122
123static unsigned int fan53555_get_mode(struct regulator_dev *rdev)
124{
125 struct fan53555_device_info *di = rdev_get_drvdata(rdev);
126 unsigned int val;
127 int ret = 0;
128
129 ret = regmap_read(di->regmap, di->vol_reg, &val);
130 if (ret < 0)
131 return ret;
132 if (val & VSEL_MODE)
133 return REGULATOR_MODE_FAST;
134 else
135 return REGULATOR_MODE_NORMAL;
136}
137
138static struct regulator_ops fan53555_regulator_ops = {
139 .set_voltage_sel = regulator_set_voltage_sel_regmap,
140 .get_voltage_sel = regulator_get_voltage_sel_regmap,
141 .map_voltage = regulator_map_voltage_linear,
142 .list_voltage = regulator_list_voltage_linear,
143 .set_suspend_voltage = fan53555_set_suspend_voltage,
144 .enable = regulator_enable_regmap,
145 .disable = regulator_disable_regmap,
146 .is_enabled = regulator_is_enabled_regmap,
147 .set_mode = fan53555_set_mode,
148 .get_mode = fan53555_get_mode,
149};
150
151/* For 00,01,03,05 options:
152 * VOUT = 0.60V + NSELx * 10mV, from 0.60 to 1.23V.
153 * For 04 option:
154 * VOUT = 0.603V + NSELx * 12.826mV, from 0.603 to 1.411V.
155 * */
156static int fan53555_device_setup(struct fan53555_device_info *di,
157 struct fan53555_platform_data *pdata)
158{
159 unsigned int reg, data, mask;
160
161 /* Setup voltage control register */
162 switch (pdata->sleep_vsel_id) {
163 case FAN53555_VSEL_ID_0:
164 di->sleep_reg = FAN53555_VSEL0;
165 di->vol_reg = FAN53555_VSEL1;
166 break;
167 case FAN53555_VSEL_ID_1:
168 di->sleep_reg = FAN53555_VSEL1;
169 di->vol_reg = FAN53555_VSEL0;
170 break;
171 default:
172 dev_err(di->dev, "Invalid VSEL ID!\n");
173 return -EINVAL;
174 }
175 /* Init voltage range and step */
176 switch (di->chip_id) {
177 case FAN53555_CHIP_ID_00:
178 case FAN53555_CHIP_ID_01:
179 case FAN53555_CHIP_ID_03:
180 case FAN53555_CHIP_ID_05:
181 di->vsel_min = 600000;
Yunfan Zhang49d8c592012-09-08 03:52:18 -0700182 di->vsel_step = 10000;
183 break;
184 case FAN53555_CHIP_ID_04:
185 di->vsel_min = 603000;
Yunfan Zhang49d8c592012-09-08 03:52:18 -0700186 di->vsel_step = 12826;
187 break;
188 default:
189 dev_err(di->dev,
190 "Chip ID[%d]\n not supported!\n", di->chip_id);
191 return -EINVAL;
192 }
193 /* Init slew rate */
194 if (pdata->slew_rate & 0x7)
195 di->slew_rate = pdata->slew_rate;
196 else
197 di->slew_rate = FAN53555_SLEW_RATE_64MV;
198 reg = FAN53555_CONTROL;
199 data = di->slew_rate << CTL_SLEW_SHIFT;
200 mask = CTL_SLEW_MASK;
201 return regmap_update_bits(di->regmap, reg, mask, data);
202}
203
204static int fan53555_regulator_register(struct fan53555_device_info *di,
205 struct regulator_config *config)
206{
207 struct regulator_desc *rdesc = &di->desc;
208
209 rdesc->name = "fan53555-reg";
210 rdesc->ops = &fan53555_regulator_ops;
211 rdesc->type = REGULATOR_VOLTAGE;
212 rdesc->n_voltages = FAN53555_NVOLTAGES;
213 rdesc->enable_reg = di->vol_reg;
214 rdesc->enable_mask = VSEL_BUCK_EN;
215 rdesc->min_uV = di->vsel_min;
216 rdesc->uV_step = di->vsel_step;
217 rdesc->vsel_reg = di->vol_reg;
218 rdesc->vsel_mask = VSEL_NSEL_MASK;
219 rdesc->owner = THIS_MODULE;
220
221 di->rdev = regulator_register(&di->desc, config);
222 if (IS_ERR(di->rdev))
223 return PTR_ERR(di->rdev);
224 return 0;
225
226}
227
228static struct regmap_config fan53555_regmap_config = {
229 .reg_bits = 8,
230 .val_bits = 8,
231};
232
Bill Pembertona5023572012-11-19 13:22:22 -0500233static int fan53555_regulator_probe(struct i2c_client *client,
Yunfan Zhang49d8c592012-09-08 03:52:18 -0700234 const struct i2c_device_id *id)
235{
236 struct fan53555_device_info *di;
237 struct fan53555_platform_data *pdata;
238 struct regulator_config config = { };
239 unsigned int val;
240 int ret;
241
242 pdata = client->dev.platform_data;
243 if (!pdata || !pdata->regulator) {
244 dev_err(&client->dev, "Platform data not found!\n");
245 return -ENODEV;
246 }
247
248 di = devm_kzalloc(&client->dev, sizeof(struct fan53555_device_info),
249 GFP_KERNEL);
250 if (!di) {
251 dev_err(&client->dev, "Failed to allocate device info data!\n");
252 return -ENOMEM;
253 }
254 di->regmap = devm_regmap_init_i2c(client, &fan53555_regmap_config);
255 if (IS_ERR(di->regmap)) {
256 dev_err(&client->dev, "Failed to allocate regmap!\n");
257 return PTR_ERR(di->regmap);
258 }
259 di->dev = &client->dev;
260 di->regulator = pdata->regulator;
261 i2c_set_clientdata(client, di);
262 /* Get chip ID */
263 ret = regmap_read(di->regmap, FAN53555_ID1, &val);
264 if (ret < 0) {
265 dev_err(&client->dev, "Failed to get chip ID!\n");
266 return -ENODEV;
267 }
268 di->chip_id = val & DIE_ID;
269 /* Get chip revision */
270 ret = regmap_read(di->regmap, FAN53555_ID2, &val);
271 if (ret < 0) {
272 dev_err(&client->dev, "Failed to get chip Rev!\n");
273 return -ENODEV;
274 }
275 di->chip_rev = val & DIE_REV;
276 dev_info(&client->dev, "FAN53555 Option[%d] Rev[%d] Detected!\n",
277 di->chip_id, di->chip_rev);
278 /* Device init */
279 ret = fan53555_device_setup(di, pdata);
280 if (ret < 0) {
281 dev_err(&client->dev, "Failed to setup device!\n");
282 return ret;
283 }
284 /* Register regulator */
285 config.dev = di->dev;
286 config.init_data = di->regulator;
287 config.regmap = di->regmap;
288 config.driver_data = di;
289 ret = fan53555_regulator_register(di, &config);
290 if (ret < 0)
291 dev_err(&client->dev, "Failed to register regulator!\n");
292 return ret;
293
294}
295
Bill Pemberton8dc995f2012-11-19 13:26:10 -0500296static int fan53555_regulator_remove(struct i2c_client *client)
Yunfan Zhang49d8c592012-09-08 03:52:18 -0700297{
298 struct fan53555_device_info *di = i2c_get_clientdata(client);
299
300 regulator_unregister(di->rdev);
301 return 0;
302}
303
304static const struct i2c_device_id fan53555_id[] = {
305 {"fan53555", -1},
306 { },
307};
308
309static struct i2c_driver fan53555_regulator_driver = {
310 .driver = {
311 .name = "fan53555-regulator",
312 },
313 .probe = fan53555_regulator_probe,
Bill Pemberton5eb9f2b2012-11-19 13:20:42 -0500314 .remove = fan53555_regulator_remove,
Yunfan Zhang49d8c592012-09-08 03:52:18 -0700315 .id_table = fan53555_id,
316};
317
318module_i2c_driver(fan53555_regulator_driver);
319
320MODULE_AUTHOR("Yunfan Zhang <yfzhang@marvell.com>");
321MODULE_DESCRIPTION("FAN53555 regulator driver");
322MODULE_LICENSE("GPL v2");