blob: 2d6423c2d19340015c9f4be263342387db661d9a [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Misc strange devices
3#
4
Jean Delvareff606672011-03-21 17:59:36 +01005# This one has to live outside of the MISC_DEVICES conditional,
6# because it may be selected by drivers/platform/x86/hp_accel.
7config SENSORS_LIS3LV02D
8 tristate
9 depends on INPUT
10 select INPUT_POLLDEV
11 default n
12
Randy Dunlap7bf1fc42007-07-15 23:40:15 -070013menuconfig MISC_DEVICES
Jan Engelhardt376df372007-07-15 23:39:29 -070014 bool "Misc devices"
Jan Engelhardt06bfb7e2007-08-18 12:56:21 +020015 ---help---
16 Say Y here to get to see options for device drivers from various
17 different categories. This option alone does not add any kernel code.
18
19 If you say N, all options in this submenu will be skipped and disabled.
Jan Engelhardt376df372007-07-15 23:39:29 -070020
Randy Dunlap7bf1fc42007-07-15 23:40:15 -070021if MISC_DEVICES
Linus Torvalds1da177e2005-04-16 15:20:36 -070022
Michael Hennerich4eb174b2009-12-14 18:00:15 -080023config AD525X_DPOT
Michael Hennerich6c536e42010-05-24 14:33:14 -070024 tristate "Analog Devices Digital Potentiometers"
25 depends on (I2C || SPI) && SYSFS
Michael Hennerich4eb174b2009-12-14 18:00:15 -080026 help
27 If you say yes here, you get support for the Analog Devices
Michael Hennerich6c536e42010-05-24 14:33:14 -070028 AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255
29 AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203,
30 AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235,
31 AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293,
Michael Henneriche3ae684762010-05-24 14:33:15 -070032 AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242,
Michael Hennerichc74cba62010-05-24 14:33:15 -070033 AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282,
Michael Hennericha4bd3942010-10-26 14:22:36 -070034 ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173, AD5270,
35 AD5271, AD5272, AD5274
Michael Hennerich4eb174b2009-12-14 18:00:15 -080036 digital potentiometer chips.
37
38 See Documentation/misc-devices/ad525x_dpot.txt for the
39 userspace interface.
40
41 This driver can also be built as a module. If so, the module
42 will be called ad525x_dpot.
43
Michael Hennerich6c536e42010-05-24 14:33:14 -070044config AD525X_DPOT_I2C
45 tristate "support I2C bus connection"
46 depends on AD525X_DPOT && I2C
47 help
48 Say Y here if you have a digital potentiometers hooked to an I2C bus.
49
50 To compile this driver as a module, choose M here: the
51 module will be called ad525x_dpot-i2c.
52
53config AD525X_DPOT_SPI
54 tristate "support SPI bus connection"
55 depends on AD525X_DPOT && SPI_MASTER
56 help
57 Say Y here if you have a digital potentiometers hooked to an SPI bus.
58
59 If unsure, say N (but it's safe to say "Y").
60
61 To compile this driver as a module, choose M here: the
62 module will be called ad525x_dpot-spi.
63
David Brownell9a1e8eb2008-02-08 04:21:21 -080064config ATMEL_PWM
65 tristate "Atmel AT32/AT91 PWM support"
Andrew Victor8b6e47a2008-10-15 22:01:55 -070066 depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9
David Brownell9a1e8eb2008-02-08 04:21:21 -080067 help
68 This option enables device driver support for the PWM channels
Matt LaPlante692105b2009-01-26 11:12:25 +010069 on certain Atmel processors. Pulse Width Modulation is used for
70 purposes including software controlled power-efficient backlights
David Brownell9a1e8eb2008-02-08 04:21:21 -080071 on LCD displays, motor control, and waveform generation.
72
Arun Murthyf0f05b12010-09-06 12:24:52 +053073config AB8500_PWM
74 bool "AB8500 PWM support"
Mark Brownb1437582010-12-20 12:28:11 +000075 depends on AB8500_CORE && ARCH_U8500
Arun Murthyf0f05b12010-09-06 12:24:52 +053076 select HAVE_PWM
77 help
78 This driver exports functions to enable/disble/config/free Pulse
79 Width Modulation in the Analog Baseband Chip AB8500.
80 It is used by led and backlight driver to control the intensity.
81
David Brownell2a341f52008-02-22 17:23:23 -080082config ATMEL_TCLIB
83 bool "Atmel AT32/AT91 Timer/Counter Library"
84 depends on (AVR32 || ARCH_AT91)
85 help
86 Select this if you want a library to allocate the Timer/Counter
87 blocks found on many Atmel processors. This facilitates using
88 these blocks by different drivers despite processor differences.
89
David Brownell4d243f92008-02-22 17:28:37 -080090config ATMEL_TCB_CLKSRC
91 bool "TC Block Clocksource"
John Stultz592913e2010-07-13 17:56:20 -070092 depends on ATMEL_TCLIB
David Brownell4d243f92008-02-22 17:28:37 -080093 default y
94 help
95 Select this to get a high precision clocksource based on a
96 TC block with a 5+ MHz base clock rate. Two timer channels
97 are combined to make a single 32-bit timer.
98
99 When GENERIC_CLOCKEVENTS is defined, the third timer channel
100 may be used as a clock event device supporting oneshot mode
101 (delays of up to two seconds) based on the 32 KiHz clock.
102
103config ATMEL_TCB_CLKSRC_BLOCK
104 int
105 depends on ATMEL_TCB_CLKSRC
106 prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X
107 default 0
108 range 0 1
109 help
110 Some chips provide more than one TC block, so you have the
111 choice of which one to use for the clock framework. The other
112 TC can be used for other purposes, such as PWM generation and
113 interval timing.
114
Linus Torvalds1da177e2005-04-16 15:20:36 -0700115config IBM_ASM
116 tristate "Device driver for IBM RSA service processor"
Dmitry Torokhovff294cb2007-07-17 04:04:01 -0700117 depends on X86 && PCI && INPUT && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -0700118 ---help---
119 This option enables device driver support for in-band access to the
120 IBM RSA (Condor) service processor in eServer xSeries systems.
121 The ibmasm device driver allows user space application to access
122 ASM (Advanced Systems Management) functions on the service
123 processor. The driver is meant to be used in conjunction with
124 a user space API.
125 The ibmasm driver also enables the OS to use the UART on the
126 service processor board as a regular serial port. To make use of
127 this feature serial driver support (CONFIG_SERIAL_8250) must be
128 enabled.
Alex Dubovf9565122006-10-04 02:15:38 -0700129
Linus Torvalds1da177e2005-04-16 15:20:36 -0700130 WARNING: This software may not be supported or function
131 correctly on your IBM server. Please consult the IBM ServerProven
Justin P. Mattock631dd1a2010-10-18 11:03:14 +0200132 website <http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/>
133 for information on the specific driver level and support statement
Linus Torvalds1da177e2005-04-16 15:20:36 -0700134 for your IBM server.
135
Jiri Slabycef2cf02007-05-08 00:31:45 -0700136config PHANTOM
Jiri Slabyec905a12008-07-25 01:48:23 -0700137 tristate "Sensable PHANToM (PCI)"
Jiri Slabycef2cf02007-05-08 00:31:45 -0700138 depends on PCI
139 help
140 Say Y here if you want to build a driver for Sensable PHANToM device.
141
Jiri Slabyec905a12008-07-25 01:48:23 -0700142 This driver is only for PCI PHANToMs.
143
Jiri Slabycef2cf02007-05-08 00:31:45 -0700144 If you choose to build module, its name will be phantom. If unsure,
145 say N here.
146
J Freyensee0b61d2a2011-05-06 16:56:49 -0700147config INTEL_MID_PTI
148 tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard"
Heiko Carstens8ea95e02011-08-02 10:08:34 +0200149 depends on PCI
J Freyensee0b61d2a2011-05-06 16:56:49 -0700150 default n
151 help
152 The PTI (Parallel Trace Interface) driver directs
153 trace data routed from various parts in the system out
154 through an Intel Penwell PTI port and out of the mobile
155 device for analysis with a debugging tool (Lauterbach or Fido).
156
157 You should select this driver if the target kernel is meant for
158 an Intel Atom (non-netbook) mobile device containing a MIPI
159 P1149.7 standard implementation.
160
Brent Casavant59f14802006-10-17 00:09:25 -0700161config SGI_IOC4
162 tristate "SGI IOC4 Base IO support"
Al Viroaa6c2e62006-10-24 11:16:29 +0100163 depends on PCI
Brent Casavant59f14802006-10-17 00:09:25 -0700164 ---help---
165 This option enables basic support for the IOC4 chip on certain
166 SGI IO controller cards (IO9, IO10, and PCI-RT). This option
167 does not enable any specific functions on such a card, but provides
168 necessary infrastructure for other drivers to utilize.
169
170 If you have an SGI Altix with an IOC4-based card say Y.
171 Otherwise say N.
172
Alex Dubovf9565122006-10-04 02:15:38 -0700173config TIFM_CORE
174 tristate "TI Flash Media interface support (EXPERIMENTAL)"
Al Viro9f3bed52007-02-09 16:05:42 +0000175 depends on EXPERIMENTAL && PCI
Alex Dubovf9565122006-10-04 02:15:38 -0700176 help
177 If you want support for Texas Instruments(R) Flash Media adapters
178 you should select this option and then also choose an appropriate
179 host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter
180 support', if you have a TI PCI74xx compatible card reader, for
181 example.
182 You will also have to select some flash card format drivers. MMC/SD
183 cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD
184 Interface support (MMC_TIFM_SD)'.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700185
Len Brown8c367902008-11-30 23:59:07 -0500186 To compile this driver as a module, choose M here: the module will
Alex Dubovf9565122006-10-04 02:15:38 -0700187 be called tifm_core.
188
189config TIFM_7XX1
190 tristate "TI Flash Media PCI74xx/PCI76xx host adapter support (EXPERIMENTAL)"
191 depends on PCI && TIFM_CORE && EXPERIMENTAL
192 default TIFM_CORE
193 help
194 This option enables support for Texas Instruments(R) PCI74xx and
195 PCI76xx families of Flash Media adapters, found in many laptops.
196 To make actual use of the device, you will have to select some
197 flash card format drivers, as outlined in the TIFM_CORE Help.
198
Len Brown8c367902008-11-30 23:59:07 -0500199 To compile this driver as a module, choose M here: the module will
Alex Dubovf9565122006-10-04 02:15:38 -0700200 be called tifm_7xx1.
201
Darrick J. Wonga412ae32008-11-12 13:27:04 -0800202config ICS932S401
203 tristate "Integrated Circuits ICS932S401"
204 depends on I2C && EXPERIMENTAL
205 help
206 If you say yes here you get support for the Integrated Circuits
207 ICS932S401 clock control chips.
208
209 This driver can also be built as a module. If so, the module
210 will be called ics932s401.
211
Hans-Christian Egtvedteb1f2932007-10-16 23:26:11 -0700212config ATMEL_SSC
213 tristate "Device driver for Atmel SSC peripheral"
214 depends on AVR32 || ARCH_AT91
215 ---help---
Matt LaPlante692105b2009-01-26 11:12:25 +0100216 This option enables device driver support for Atmel Synchronized
Hans-Christian Egtvedteb1f2932007-10-16 23:26:11 -0700217 Serial Communication peripheral (SSC).
218
219 The SSC peripheral supports a wide variety of serial frame based
220 communications, i.e. I2S, SPI, etc.
221
222 If unsure, say N.
223
James Bottomleyd569d5b2008-02-03 15:40:56 -0600224config ENCLOSURE_SERVICES
225 tristate "Enclosure Services"
226 default n
227 help
228 Provides support for intelligent enclosures (bays which
229 contain storage devices). You also need either a host
230 driver (SCSI/ATA) which supports enclosures
231 or a SCSI enclosure device (SES) to use these services.
232
Dean Nelson45d9ca42008-04-22 14:46:56 -0500233config SGI_XP
234 tristate "Support communication between SGI SSIs"
Dean Nelson3b0de7b2008-08-01 14:19:08 -0500235 depends on NET
Nick Piggin03b48632009-01-20 04:36:04 +0100236 depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP
Dean Nelson45d9ca42008-04-22 14:46:56 -0500237 select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
238 select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
Robin Holt1bc4faa2009-04-02 16:59:13 -0700239 select SGI_GRU if X86_64 && SMP
Dean Nelson45d9ca42008-04-22 14:46:56 -0500240 ---help---
241 An SGI machine can be divided into multiple Single System
242 Images which act independently of each other and have
243 hardware based memory protection from the others. Enabling
244 this feature will allow for direct communication between SSIs
245 based on a network adapter and DMA messaging.
246
Andres Salomon82dca612009-12-14 18:00:37 -0800247config CS5535_MFGPT
248 tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"
Philip A. Prindeville703f03c2011-07-25 17:13:05 -0700249 depends on PCI && X86 && MFD_CS5535
Andres Salomon82dca612009-12-14 18:00:37 -0800250 default n
251 help
252 This driver provides access to MFGPT functionality for other
253 drivers that need timers. MFGPTs are available in the CS5535 and
254 CS5536 companion chips that are found in AMD Geode and several
255 other platforms. They have a better resolution and max interval
256 than the generic PIT, and are suitable for use as high-res timers.
257 You probably don't want to enable this manually; other drivers that
258 make use of it should enable it.
259
260config CS5535_MFGPT_DEFAULT_IRQ
261 int
Geert Uytterhoeven2bf212b2009-12-17 15:27:05 -0800262 depends on CS5535_MFGPT
Andres Salomon82dca612009-12-14 18:00:37 -0800263 default 7
264 help
265 MFGPTs on the CS5535 require an interrupt. The selected IRQ
266 can be overridden as a module option as well as by driver that
267 use the cs5535_mfgpt_ API; however, different architectures might
268 want to use a different IRQ by default. This is here for
269 architectures to set as necessary.
270
Randy Dunlap9c8f05c2010-03-05 13:42:35 -0800271config CS5535_CLOCK_EVENT_SRC
272 tristate "CS5535/CS5536 high-res timer (MFGPT) events"
John Stultz592913e2010-07-13 17:56:20 -0700273 depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT
Randy Dunlap9c8f05c2010-03-05 13:42:35 -0800274 help
275 This driver provides a clock event source based on the MFGPT
276 timer(s) in the CS5535 and CS5536 companion chips.
277 MFGPTs have a better resolution and max interval than the
278 generic PIT, and are suitable for use as high-res timers.
279
David Altobelli89bcb052008-07-02 09:38:53 -0600280config HP_ILO
dann frazier1ce873a2010-10-15 10:14:34 -0600281 tristate "Channel interface driver for the HP iLO processor"
Andrew Mortonf38954c2008-07-25 01:45:52 -0700282 depends on PCI
David Altobelli89bcb052008-07-02 09:38:53 -0600283 default n
284 help
285 The channel interface driver allows applications to communicate
dann frazier1ce873a2010-10-15 10:14:34 -0600286 with iLO management processors present on HP ProLiant servers.
287 Upon loading, the driver creates /dev/hpilo/dXccbN files, which
288 can be used to gather data from the management processor, via
289 read and write system calls.
David Altobelli89bcb052008-07-02 09:38:53 -0600290
291 To compile this driver as a module, choose M here: the
292 module will be called hpilo.
293
Jack Steiner3d919e52008-07-29 22:34:01 -0700294config SGI_GRU
295 tristate "SGI GRU driver"
Robin Holt1bc4faa2009-04-02 16:59:13 -0700296 depends on X86_UV && SMP
Jack Steiner3d919e52008-07-29 22:34:01 -0700297 default n
298 select MMU_NOTIFIER
299 ---help---
300 The GRU is a hardware resource located in the system chipset. The GRU
301 contains memory that can be mmapped into the user address space. This memory is
302 used to communicate with the GRU to perform functions such as load/store,
303 scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user
304 instructions using user virtual addresses. GRU instructions (ex., bcopy) use
305 user virtual addresses for operands.
306
307 If you are not running on a SGI UV system, say N.
308
309config SGI_GRU_DEBUG
310 bool "SGI GRU driver debug"
311 depends on SGI_GRU
312 default n
313 ---help---
314 This option enables addition debugging code for the SGI GRU driver. If
315 you are unsure, say N.
316
anantha22d96aa2010-10-26 14:22:41 -0700317config APDS9802ALS
318 tristate "Medfield Avago APDS9802 ALS Sensor module"
319 depends on I2C
320 help
321 If you say yes here you get support for the ALS APDS9802 ambient
322 light sensor.
323
324 This driver can also be built as a module. If so, the module
325 will be called apds9802als.
326
Daniel Mack3cdbbee2009-03-31 15:23:53 -0700327config ISL29003
328 tristate "Intersil ISL29003 ambient light sensor"
329 depends on I2C && SYSFS
330 help
331 If you say yes here you get support for the Intersil ISL29003
332 ambient light sensor.
333
334 This driver can also be built as a module. If so, the module
335 will be called isl29003.
336
Kalhan Trisal2e85c4d2010-10-26 14:22:40 -0700337config ISL29020
338 tristate "Intersil ISL29020 ambient light sensor"
339 depends on I2C
340 help
341 If you say yes here you get support for the Intersil ISL29020
342 ambient light sensor.
343
344 This driver can also be built as a module. If so, the module
345 will be called isl29020.
346
Jean Delvare6a9bcce2010-03-13 20:56:54 +0100347config SENSORS_TSL2550
348 tristate "Taos TSL2550 ambient light sensor"
349 depends on I2C && SYSFS
350 help
351 If you say yes here you get support for the Taos TSL2550
352 ambient light sensor.
353
354 This driver can also be built as a module. If so, the module
355 will be called tsl2550.
356
Hemanth V7efe15f2010-08-09 17:20:25 -0700357config SENSORS_BH1780
358 tristate "ROHM BH1780GLI ambient light sensor"
359 depends on I2C && SYSFS
360 help
361 If you say yes here you get support for the ROHM BH1780GLI
362 ambient light sensor.
363
364 This driver can also be built as a module. If so, the module
365 will be called bh1780gli.
366
Samu Onkalo190420a2010-10-26 14:22:37 -0700367config SENSORS_BH1770
368 tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor"
369 depends on I2C
370 ---help---
371 Say Y here if you want to build a driver for BH1770GLC (ROHM) or
372 SFH7770 (Osram) combined ambient light and proximity sensor chip.
373
374 To compile this driver as a module, choose M here: the
375 module will be called bh1770glc. If unsure, say N here.
376
Samu Onkalo92b1f842010-10-26 14:22:38 -0700377config SENSORS_APDS990X
378 tristate "APDS990X combined als and proximity sensors"
379 depends on I2C
380 default n
381 ---help---
382 Say Y here if you want to build a driver for Avago APDS990x
383 combined ambient light and proximity sensor chip.
384
385 To compile this driver as a module, choose M here: the
386 module will be called apds990x. If unsure, say N here.
387
Kalhan Trisalcfa3b242010-08-09 17:21:05 -0700388config HMC6352
389 tristate "Honeywell HMC6352 compass"
390 depends on I2C
391 help
392 This driver provides support for the Honeywell HMC6352 compass,
393 providing configuration and heading data via sysfs.
394
Hartley Sweetenef123792009-07-29 22:41:06 +0100395config EP93XX_PWM
396 tristate "EP93xx PWM support"
397 depends on ARCH_EP93XX
398 help
399 This option enables device driver support for the PWM channels
400 on the Cirrus EP93xx processors. The EP9307 chip only has one
401 PWM channel all the others have two, the second channel is an
402 alternate function of the EGPIO14 pin. A sysfs interface is
403 provided to control the PWM channels.
404
405 To compile this driver as a module, choose M here: the module will
406 be called ep93xx_pwm.
407
Wolfram Sangdddc66f2009-12-06 17:06:16 +0100408config DS1682
409 tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
410 depends on I2C && EXPERIMENTAL
411 help
412 If you say yes here you get support for Dallas Semiconductor
413 DS1682 Total Elapsed Time Recorder.
414
415 This driver can also be built as a module. If so, the module
416 will be called ds1682.
417
Pratyush Anandb9500542011-03-22 16:33:58 -0700418config SPEAR13XX_PCIE_GADGET
419 bool "PCIe gadget support for SPEAr13XX platform"
420 depends on ARCH_SPEAR13XX
421 default n
422 help
423 This option enables gadget support for PCIe controller. If
424 board file defines any controller as PCIe endpoint then a sysfs
425 entry will be created for that controller. User can use these
426 sysfs node to configure PCIe EP as per his requirements.
427
Daniel Mack4d009282009-12-14 18:00:17 -0800428config TI_DAC7512
429 tristate "Texas Instruments DAC7512"
430 depends on SPI && SYSFS
431 help
432 If you say yes here you get support for the Texas Instruments
433 DAC7512 16-bit digital-to-analog converter.
434
435 This driver can also be built as a module. If so, the module
Jonathan Neuschäfer149d7302010-11-09 23:20:26 +0100436 will be called ti_dac7512.
Daniel Mack4d009282009-12-14 18:00:17 -0800437
Dmitry Torokhov453dc652010-04-23 13:18:08 -0400438config VMWARE_BALLOON
439 tristate "VMware Balloon Driver"
440 depends on X86
441 help
442 This is VMware physical memory management driver which acts
443 like a "balloon" that can be inflated to reclaim physical pages
444 by reserving them in the guest and invalidating them in the
445 monitor, freeing up the underlying machine pages so they can
446 be allocated to other guests. The balloon can also be deflated
447 to allow the guest to use more physical memory.
448
449 If unsure, say N.
450
451 To compile this driver as a module, choose M here: the
Dmitry Torokhovd544b7a42010-09-22 13:04:57 -0700452 module will be called vmw_balloon.
Dmitry Torokhov453dc652010-04-23 13:18:08 -0400453
Linus Walleijce896242010-07-17 12:33:48 +0100454config ARM_CHARLCD
455 bool "ARM Ltd. Character LCD Driver"
456 depends on PLAT_VERSATILE
457 help
458 This is a driver for the character LCD found on the ARM Ltd.
459 Versatile and RealView Platform Baseboards. It doesn't do
460 very much more than display the text "ARM Linux" on the first
461 line and the Linux version on the second line, but that's
462 still useful.
463
Christoph Mair5bf1d292010-08-09 17:20:28 -0700464config BMP085
465 tristate "BMP085 digital pressure sensor"
466 depends on I2C && SYSFS
467 help
468 If you say yes here you get support for the Bosch Sensortec
Thomas Weberd8b187c62010-08-23 11:20:34 +0200469 BMP085 digital pressure sensor.
Christoph Mair5bf1d292010-08-09 17:20:28 -0700470
471 To compile this driver as a module, choose M here: the
472 module will be called bmp085.
473
Masayuki Ohtakcf4ece52010-09-01 21:16:30 +0900474config PCH_PHUB
Tomoya MORINAGA275640b2011-05-12 13:12:36 +0900475 tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) PHUB"
Masayuki Ohtakcf4ece52010-09-01 21:16:30 +0900476 depends on PCI
477 help
478 This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of
479 Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded
480 processor. The Topcliff has MAC address and Option ROM data in SROM.
481 This driver can access MAC address and Option ROM data in SROM.
482
Tomoya MORINAGA275640b2011-05-12 13:12:36 +0900483 This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
484 Output Hub), ML7213 and ML7223.
485 ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is
486 for MP(Media Phone) use.
487 ML7213/ML7223 is companion chip for Intel Atom E6xx series.
488 ML7213/ML7223 is completely compatible for Intel EG20T PCH.
Tomoya MORINAGAc47dda72010-12-22 21:04:11 +0900489
Masayuki Ohtakcf4ece52010-09-01 21:16:30 +0900490 To compile this driver as a module, choose M here: the module will
491 be called pch_phub.
492
Donggeun Kima1bb73d2011-07-25 17:13:07 -0700493config USB_SWITCH_FSA9480
494 tristate "FSA9480 USB Switch"
495 depends on I2C
496 help
497 The FSA9480 is a USB port accessory detector and switch.
498 The FSA9480 is fully controlled using I2C and enables USB data,
499 stereo and mono audio, video, microphone and UART data to use
500 a common connector port.
501
Rodolfo Giometti4e17e1d2008-11-12 13:27:12 -0800502source "drivers/misc/c2port/Kconfig"
Wolfram Sang5195e502009-01-26 21:19:53 +0100503source "drivers/misc/eeprom/Kconfig"
Michał Mirosław5f5bac82009-05-22 20:33:59 +0200504source "drivers/misc/cb710/Kconfig"
Tomas Winklerab69a5a2009-10-17 09:09:34 +0000505source "drivers/misc/iwmc3200top/Kconfig"
Pavan Savoy2bb32e82010-10-06 12:18:15 -0400506source "drivers/misc/ti-st/Kconfig"
Jean Delvareff606672011-03-21 17:59:36 +0100507source "drivers/misc/lis3lv02d/Kconfig"
Ira Snyderc186f0e2011-02-11 13:34:29 +0000508source "drivers/misc/carma/Kconfig"
Rodolfo Giometti4e17e1d2008-11-12 13:27:12 -0800509
Randy Dunlap7bf1fc42007-07-15 23:40:15 -0700510endif # MISC_DEVICES