blob: 8fead8e46bce6bad5a72f74c80bda4c592a15cf0 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* sc520cdp.c -- MTD map driver for AMD SC520 Customer Development Platform
2 *
3 * Copyright (C) 2001 Sysgo Real-Time Solutions GmbH
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
18 *
Linus Torvalds1da177e2005-04-16 15:20:36 -070019 *
20 * The SC520CDP is an evaluation board for the Elan SC520 processor available
21 * from AMD. It has two banks of 32-bit Flash ROM, each 8 Megabytes in size,
22 * and up to 512 KiB of 8-bit DIL Flash ROM.
23 * For details see http://www.amd.com/products/epd/desiging/evalboards/18.elansc520/520_cdp_brief/index.html
24 */
25
Linus Torvalds1da177e2005-04-16 15:20:36 -070026#include <linux/module.h>
27#include <linux/types.h>
28#include <linux/kernel.h>
29#include <linux/init.h>
30#include <asm/io.h>
31#include <linux/mtd/mtd.h>
32#include <linux/mtd/map.h>
33#include <linux/mtd/concat.h>
34
35/*
36** The Embedded Systems BIOS decodes the first FLASH starting at
37** 0x8400000. This is a *terrible* place for it because accessing
38** the flash at this location causes the A22 address line to be high
39** (that's what 0x8400000 binary's ought to be). But this is the highest
40** order address line on the raw flash devices themselves!!
41** This causes the top HALF of the flash to be accessed first. Beyond
42** the physical limits of the flash, the flash chip aliases over (to
43** 0x880000 which causes the bottom half to be accessed. This splits the
44** flash into two and inverts it! If you then try to access this from another
45** program that does NOT do this insanity, then you *will* access the
46** first half of the flash, but not find what you expect there. That
47** stuff is in the *second* half! Similarly, the address used by the
48** BIOS for the second FLASH bank is also quite a bad choice.
49** If REPROGRAM_PAR is defined below (the default), then this driver will
50** choose more useful addresses for the FLASH banks by reprogramming the
51** responsible PARxx registers in the SC520's MMCR region. This will
52** cause the settings to be incompatible with the BIOS's settings, which
53** shouldn't be a problem since you are running Linux, (i.e. the BIOS is
54** not much use anyway). However, if you need to be compatible with
55** the BIOS for some reason, just undefine REPROGRAM_PAR.
56*/
57#define REPROGRAM_PAR
58
59
60
61#ifdef REPROGRAM_PAR
62
63/* These are the addresses we want.. */
64#define WINDOW_ADDR_0 0x08800000
65#define WINDOW_ADDR_1 0x09000000
66#define WINDOW_ADDR_2 0x09800000
67
68/* .. and these are the addresses the BIOS gives us */
69#define WINDOW_ADDR_0_BIOS 0x08400000
70#define WINDOW_ADDR_1_BIOS 0x08c00000
71#define WINDOW_ADDR_2_BIOS 0x09400000
72
73#else
74
75#define WINDOW_ADDR_0 0x08400000
76#define WINDOW_ADDR_1 0x08C00000
77#define WINDOW_ADDR_2 0x09400000
78
79#endif
80
81#define WINDOW_SIZE_0 0x00800000
82#define WINDOW_SIZE_1 0x00800000
83#define WINDOW_SIZE_2 0x00080000
84
85
86static struct map_info sc520cdp_map[] = {
87 {
88 .name = "SC520CDP Flash Bank #0",
89 .size = WINDOW_SIZE_0,
90 .bankwidth = 4,
91 .phys = WINDOW_ADDR_0
92 },
93 {
94 .name = "SC520CDP Flash Bank #1",
95 .size = WINDOW_SIZE_1,
96 .bankwidth = 4,
97 .phys = WINDOW_ADDR_1
98 },
99 {
100 .name = "SC520CDP DIL Flash",
101 .size = WINDOW_SIZE_2,
102 .bankwidth = 1,
103 .phys = WINDOW_ADDR_2
104 },
105};
106
Tobias Klauser87d10f32006-03-31 02:29:45 -0800107#define NUM_FLASH_BANKS ARRAY_SIZE(sc520cdp_map)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700108
109static struct mtd_info *mymtd[NUM_FLASH_BANKS];
110static struct mtd_info *merged_mtd;
111
112#ifdef REPROGRAM_PAR
113
114/*
115** The SC520 MMCR (memory mapped control register) region resides
116** at 0xFFFEF000. The 16 Programmable Address Region (PAR) registers
117** are at offset 0x88 in the MMCR:
118*/
119#define SC520_MMCR_BASE 0xFFFEF000
120#define SC520_MMCR_EXTENT 0x1000
121#define SC520_PAR(x) ((0x88/sizeof(unsigned long)) + (x))
122#define NUM_SC520_PAR 16 /* total number of PAR registers */
123
124/*
125** The highest three bits in a PAR register determine what target
126** device is controlled by this PAR. Here, only ROMCS? and BOOTCS
127** devices are of interest.
128*/
129#define SC520_PAR_BOOTCS (0x4<<29)
130#define SC520_PAR_ROMCS0 (0x5<<29)
131#define SC520_PAR_ROMCS1 (0x6<<29)
132#define SC520_PAR_TRGDEV (0x7<<29)
133
134/*
135** Bits 28 thru 26 determine some attributes for the
136** region controlled by the PAR. (We only use non-cacheable)
137*/
138#define SC520_PAR_WRPROT (1<<26) /* write protected */
139#define SC520_PAR_NOCACHE (1<<27) /* non-cacheable */
140#define SC520_PAR_NOEXEC (1<<28) /* code execution denied */
141
142
143/*
144** Bit 25 determines the granularity: 4K or 64K
145*/
146#define SC520_PAR_PG_SIZ4 (0<<25)
147#define SC520_PAR_PG_SIZ64 (1<<25)
148
149/*
150** Build a value to be written into a PAR register.
151** We only need ROM entries, 64K page size:
152*/
153#define SC520_PAR_ENTRY(trgdev, address, size) \
154 ((trgdev) | SC520_PAR_NOCACHE | SC520_PAR_PG_SIZ64 | \
155 (address) >> 16 | (((size) >> 16) - 1) << 14)
156
157struct sc520_par_table
158{
159 unsigned long trgdev;
160 unsigned long new_par;
161 unsigned long default_address;
162};
163
David Woodhouse7ac571f2005-11-17 08:20:31 +0000164static const struct sc520_par_table par_table[NUM_FLASH_BANKS] =
Linus Torvalds1da177e2005-04-16 15:20:36 -0700165{
166 { /* Flash Bank #0: selected by ROMCS0 */
167 SC520_PAR_ROMCS0,
168 SC520_PAR_ENTRY(SC520_PAR_ROMCS0, WINDOW_ADDR_0, WINDOW_SIZE_0),
169 WINDOW_ADDR_0_BIOS
170 },
171 { /* Flash Bank #1: selected by ROMCS1 */
172 SC520_PAR_ROMCS1,
173 SC520_PAR_ENTRY(SC520_PAR_ROMCS1, WINDOW_ADDR_1, WINDOW_SIZE_1),
174 WINDOW_ADDR_1_BIOS
175 },
176 { /* DIL (BIOS) Flash: selected by BOOTCS */
177 SC520_PAR_BOOTCS,
178 SC520_PAR_ENTRY(SC520_PAR_BOOTCS, WINDOW_ADDR_2, WINDOW_SIZE_2),
179 WINDOW_ADDR_2_BIOS
180 }
181};
182
183
184static void sc520cdp_setup_par(void)
185{
186 volatile unsigned long __iomem *mmcr;
187 unsigned long mmcr_val;
188 int i, j;
189
190 /* map in SC520's MMCR area */
191 mmcr = ioremap_nocache(SC520_MMCR_BASE, SC520_MMCR_EXTENT);
192 if(!mmcr) { /* ioremap_nocache failed: skip the PAR reprogramming */
193 /* force physical address fields to BIOS defaults: */
194 for(i = 0; i < NUM_FLASH_BANKS; i++)
195 sc520cdp_map[i].phys = par_table[i].default_address;
196 return;
197 }
198
199 /*
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300200 ** Find the PARxx registers that are responsible for activating
Linus Torvalds1da177e2005-04-16 15:20:36 -0700201 ** ROMCS0, ROMCS1 and BOOTCS. Reprogram each of these with a
202 ** new value from the table.
203 */
204 for(i = 0; i < NUM_FLASH_BANKS; i++) { /* for each par_table entry */
205 for(j = 0; j < NUM_SC520_PAR; j++) { /* for each PAR register */
206 mmcr_val = mmcr[SC520_PAR(j)];
207 /* if target device field matches, reprogram the PAR */
208 if((mmcr_val & SC520_PAR_TRGDEV) == par_table[i].trgdev)
209 {
210 mmcr[SC520_PAR(j)] = par_table[i].new_par;
211 break;
212 }
213 }
214 if(j == NUM_SC520_PAR)
215 { /* no matching PAR found: try default BIOS address */
216 printk(KERN_NOTICE "Could not find PAR responsible for %s\n",
217 sc520cdp_map[i].name);
218 printk(KERN_NOTICE "Trying default address 0x%lx\n",
219 par_table[i].default_address);
220 sc520cdp_map[i].phys = par_table[i].default_address;
221 }
222 }
223 iounmap(mmcr);
224}
225#endif
226
227
228static int __init init_sc520cdp(void)
229{
230 int i, devices_found = 0;
Thomas Gleixner69f34c92005-11-07 11:15:40 +0000231
Linus Torvalds1da177e2005-04-16 15:20:36 -0700232#ifdef REPROGRAM_PAR
233 /* reprogram PAR registers so flash appears at the desired addresses */
234 sc520cdp_setup_par();
235#endif
236
237 for (i = 0; i < NUM_FLASH_BANKS; i++) {
Andrew Mortone3896122007-02-17 16:02:06 -0800238 printk(KERN_NOTICE "SC520 CDP flash device: 0x%Lx at 0x%Lx\n",
239 (unsigned long long)sc520cdp_map[i].size,
240 (unsigned long long)sc520cdp_map[i].phys);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700241
242 sc520cdp_map[i].virt = ioremap_nocache(sc520cdp_map[i].phys, sc520cdp_map[i].size);
243
244 if (!sc520cdp_map[i].virt) {
245 printk("Failed to ioremap_nocache\n");
246 return -EIO;
247 }
248
249 simple_map_init(&sc520cdp_map[i]);
250
251 mymtd[i] = do_map_probe("cfi_probe", &sc520cdp_map[i]);
252 if(!mymtd[i])
253 mymtd[i] = do_map_probe("jedec_probe", &sc520cdp_map[i]);
254 if(!mymtd[i])
255 mymtd[i] = do_map_probe("map_rom", &sc520cdp_map[i]);
256
257 if (mymtd[i]) {
258 mymtd[i]->owner = THIS_MODULE;
259 ++devices_found;
260 }
261 else {
262 iounmap(sc520cdp_map[i].virt);
263 }
264 }
265 if(devices_found >= 2) {
266 /* Combine the two flash banks into a single MTD device & register it: */
267 merged_mtd = mtd_concat_create(mymtd, 2, "SC520CDP Flash Banks #0 and #1");
268 if(merged_mtd)
Jamie Ilesee0e87b2011-05-23 10:23:40 +0100269 mtd_device_register(merged_mtd, NULL, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700270 }
271 if(devices_found == 3) /* register the third (DIL-Flash) device */
Jamie Ilesee0e87b2011-05-23 10:23:40 +0100272 mtd_device_register(mymtd[2], NULL, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700273 return(devices_found ? 0 : -ENXIO);
274}
275
276static void __exit cleanup_sc520cdp(void)
277{
278 int i;
Thomas Gleixner69f34c92005-11-07 11:15:40 +0000279
Linus Torvalds1da177e2005-04-16 15:20:36 -0700280 if (merged_mtd) {
Jamie Ilesee0e87b2011-05-23 10:23:40 +0100281 mtd_device_unregister(merged_mtd);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700282 mtd_concat_destroy(merged_mtd);
283 }
284 if (mymtd[2])
Jamie Ilesee0e87b2011-05-23 10:23:40 +0100285 mtd_device_unregister(mymtd[2]);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700286
287 for (i = 0; i < NUM_FLASH_BANKS; i++) {
288 if (mymtd[i])
289 map_destroy(mymtd[i]);
290 if (sc520cdp_map[i].virt) {
291 iounmap(sc520cdp_map[i].virt);
292 sc520cdp_map[i].virt = NULL;
293 }
294 }
295}
296
297module_init(init_sc520cdp);
298module_exit(cleanup_sc520cdp);
299
300MODULE_LICENSE("GPL");
301MODULE_AUTHOR("Sysgo Real-Time Solutions GmbH");
302MODULE_DESCRIPTION("MTD map driver for AMD SC520 Customer Development Platform");